💾 Archived View for gmi.noulin.net › mobileNews › 206.gmi captured on 2023-01-29 at 21:20:09. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2023-01-29)
-=-=-=-=-=-=-
2007-07-24 07:11:57
(Score:5, Interesting)
by MoxFulder (159829) on Monday July 23, @03:16PM (#19960025)
(http://www.toleressea.net/)
Why are flash hard drives SO EXPENSIVE? It's $300 for a 16gb 2.5" IDE drive
[newegg.com] on Newegg!!!
On the other hand, a 16gb CompactFlash card is only $140 [newegg.com]. And the
CompactFlash interface is electrically identical to IDE/PATA, so you can use a
$5 mechanical adapter [ebay.com] to connect a CompactFlash card to your
notebook's hard drive bay.
What am I missing here???
are coming out in a few months).
features or other speed-up? (the web site doesn't say: http://
www.transcendusa.com/Products/ModDetail.asp ?ModNo=164&SpNo=3&LangNo=0
[transcendusa.com])
CF cards attached?
Inquiring minds want to know. Maybe I can start selling cheapo 16gb solid state
drives on eBay for $180 and make a killing :)
[ Reply to This | Parent ]
Windows is not compatible with CF hard drives
(Score:5, Informative)
by bflong (107195) on Monday July 23, @05:11PM (#19961715)
(http://bipolar.longbros.com/)
This is an issue I have recent and intimate knowledge of.
XP will *NOT* install on a standard CF card. Even with a CF/IDE converter,
Windows sees the CF card as a "Removable Device" and will not install to it.
Windows also will only ever see one partition on a removable device. It's also
broken when trying to format an existing partition during install, and it
corrupts itself when trying to expand it's C: partition when installing from a
sysprep'ed disk image. The only way I was able to get it installed was to
create a sysprep image the exact size that the finished install will be and
write it directly to the flash drive. It's kind of funny to double click on "My
Computer" and see the C: drive show up as a removable device with a little
removable type icon. This guys blog details the issues a bit more:
[blogspot.com]
[ Reply to This | Parent ]
o 2 replies beneath your current threshold.
Re:Why are flash hard drives so expensive???
(Score:5, Informative)
by MoxFulder (159829) on Monday July 23, @03:36PM (#19960305)
(http://www.toleressea.net/)
make sure your cf-ide adapter supports dma transfers.
The CF-IDE adapter is simply a passive mechanical adapter... nothing more than
a connector between the pins of the CF card and the pins of the IDE header.
However, you bring up a good point: if the CF card doesn't support DMA, it will
be quite slow. The one I linked to apparently doesn't support DMA [newegg.com]
:-( Anyone know what the prices are like for 16gb CF cards that do support UDMA
mode 4? An 8gb CF card supporting DMA costs $110 [newegg.com]... and it is made
by Transcend. It sounds like they may be the leading maker of CF cards that
support DMA.
Hopefully other manufacturers will catch up quick, since DMA capabilities don't
depend on the raw NAND flash chips, only on the controller chip... so the cost
to manufacture a CF card supporting DMA should barely increase.
[ Reply to This | Parent ]
o
Re:Why are flash hard drives so expensive???
(Score:5, Informative)
by Anonymous Coward on Monday July 23, @03:43PM (#19960393)
many of the cf-ide adapters do not have 2 pins connected on either end (I
forget which pins they are, but I had to solder them in on a cheap adapter to
get our transcends to work effectively. we ended up buying addonics adapters
[addonics.com]
because they support dma.