💾 Archived View for gemini.spam.works › mirrors › textfiles › phreak › datapac2.txt captured on 2023-01-29 at 10:32:59.
⬅️ Previous capture (2020-10-31)
-=-=-=-=-=-=-
DATAPAC OUT-DIAL PORT ADDRESSES (E.G. PC TO PC)
Service - DATAPAC 3101 (ASYNC/ITI) OUT-DIAL PROCEDURES (E.G. PC TO PC)
DATAPAC 3101 OUTDIAL PROCEDURES
===============================
1. SERVICE CHARACTERISTICS
-----------------------
AVAILABILITY - EIGHTEEN MAJOR CENTRES (DPSA'S) ARE BEING SERVED BY
OUTDIAL. THEY ARE: VANCOUVER, CALGARY, EDMONTON, REGINA,
SASKATOON, WINNIPEG, TORONTO, CLARKSON, LONDON, WINDSOR,
KITCHENER, HAMILTON, OTTAWA, MONTREAL, QUEBEC, HALIFAX,
SAINT JOHN (N.B.) AND ST. JOHN'S (NFLD).
SPEED - OUTDIAL IS AVAILABLE AT 300 OR 1200 BPS.
RESTRICTIONS - OUTIAL SERVICE WILL ONLY ACCEPT SENT PAID CALLS. THE
ORIGINATING END MUST USE A DEDICATED ACCESS OR USE
A NETWORK USER IDENTIFIER (NUI).
- CALLING AT THE TERMINATING END IS RESTRICTED TO THE
LOCAL CALLING AREA FOR THE DPSA REACHED.
CONFIGURATION- THE OUTDIAL PORT USES PROFILE 6, EXCEPT THAT THE USER OF
THE OUTDIAL PORT IS ALLOWED TO ESCAPE TO COMMAND MODE BY USING
"CONTROL P".
- THE DESTINATION TERMINAL MUST BE SET AT EVEN PARITY
IN ORDER TO RECEIVE THE OUTDIAL CALL.
- ONCE CONNECTED, DATAPAC 3000 USERS CAN SET AND READ
THE REMOTE ITI PARAMETERS BY SENDING LEVEL 1
PACKETS (X.29).
2. OUTDIAL PROCEDURES
------------------
1) ESTABLISH A CALL TO DATAPAC VIA A DEDICATED OR DIAL-IN ACCESS.
NOTE: IF USING A DIAL-IN ACCESS, A NETWORK USER IDENTIFIER
(NUI) MUST BE ACTIVATED BEFORE ESTABLISHING THE CALL.
2) ENTER THE ADDRESS OF THE OUTDIAL PORT.
3) DATAPAC WILL RESPOND WITH:
DATAPAC: CALL CONNECTED
ENTER DESTINATION TELEPHONE NUMBER/ENTRER LE
NUMERO DE TELEPHONE DU DESTINAIRE
4) ENTER THE 7-DIGIT TELEPHONE NUMBER (LOCAL) OF THE DESTINATION
TERMINAL.
5) DATAPAC WILL RESPOND WITH:
DIALING/COMPOSITION DU NUMERO (XXX-XXXX)
PRINTING THE DESTINATION TELEPHONE NUMBER AS IT IS DIALED.
6) DATAPAC WILL THEN INDICATE:
RINGING/SONNERIE
AS THE MODEM DETECTS RINGBACK TONE.
7) WHEN THE DESTINATION MODEM ANSWERS THE CALL, DATAPAC WILL SEND
THE FOLLOWING MESSAGE TO THE ORIGINATING END:
CALL CONNECTED/COMMUNICATION ETABLIE
8) THEN PROCEED WITH YOUR CALL.
9) TO CLEAR A CALL UPON COMPLETION, ENTER THE CLEAR COMMAND:
(CONTROL P) CLEAR (CR)
DATAPAC WILL RESPOND WITH:
DATAPAC: CALL CLEARED - REMOTE DIRECTIVE
DATAPAC: TERMINAL ADDRESS
NOTE: IF YOU HAVE USED A NUI TO PLACE THE CALL, TURN THE NUI OFF
BEFORE LEAVING THE NETWORK WITH THE COMMAND:
NUI OFF (CR)
DATAPAC WILL RESPOND WITH:
DATAPAC: NETWORK USER IDENTIFIER NOT ACTIVE
DATAPAC OUT-DIAL PORT ADDRESSES (E.G. PC TO PC)
Service - DATAPAC 3101 (ASYNC/ITI) OUT-DIAL PORT ADDRESSES
OUTDIAL PORT ADDRESSES
----------------------
OUTDIAL PORT
CITY (PROVINCE) SPEED ADDRESS
--------------- ----- -------
Calgary (ALTA) 300 63300900
1200 63300901
Clarkson (ONT) 300 91900900
1200 91900901
Edmonton (ALTA) 300 58700900
1200 58700901
Halifax (NS) 300 76101900
1200 76101901
Hamilton (ONT) 300 38500900
1200 38500901
Kitchener (ONT) 300 33400900
1200 33400901
London (ONT) 300 35600900
1200 35600901
Montreal (QUE) 300 82700902
1200 82700903
Ottawa (ONT) 300 85700901
1200 85700902
Quebec City (QUE) 300 48400900
1200 48400901
Regina (SASK) 300 72100900
1200 72100901
St-John's (NB) 300 74600900
1200 74600901
Saskatoon (SASK) 300 71100900
1200 71100901
St. John (NFLD) 300 78100900
1200 78100901
Toronto (ONT) 300 91600901
1200 91600902
Vancouver (BC) 300 67100900
1200 67100901
Windsor (ONT) 300 29500900
1200 29500901
Winnipeg (MAN) 300 69200902
1200 69200901
.