💾 Archived View for gemini.spam.works › mirrors › textfiles › hacking › g.txt captured on 2023-01-29 at 07:43:16.

View Raw

More Information

⬅️ Previous capture (2021-12-04)

-=-=-=-=-=-=-

                 GAMETOOLS V3.23 Copyright (c) 1990,1991,1992,1993
                                by Wong Wing Kin
                              All rights reserved.












What is GAMETOOLS?

        This is a TSR utility for cracking software protection such as
    disk protection, password protection and registration screens.
        It can also be used to modify the games so that they can be much
    easier finished.
        It includes an colorful internal debugger and ram viewer for
    program debugging.
        This program requires users to have some knowledge of IBM
    PC assembly language and interrupts handling.













Some important histories of this GAMETOOLS:

        This program is originally released by Computing Age Publisher(HK).
    In mid 1990, I sent this program and some other utilities with related
    articles to Computer Age. At first, GAMETOOLS V1.0 could only run on
    PC/XT but not AT. But after several months, Version 2.0 released, it
    had less bugs and run on AT. In 12/90, this program and related articles
    are published in CA#77.
        In 12/91, a much improved version 2.7 is released. It can not only
    run on AT or above, but deal with EGA, VGA, SVGA and use EMS memory. In
    this version it use "DOS-STACK SWAPPING" technique to solve DOS re-
    entrance problem so that GAMETOOLS can be popped up at anytime.
        In 4/92, GAMETOOLS V2.72 is finished and released as a freeware for
    all game crackers. It use XMS and EMS to save main memory. Moreover, it
    provides function for other screen capture programs. EMS version uses
    overlay technique to leave 16K resident portion in main memory.
        In 7/92, GAMETOOLS V2.80 for 386 is released. It support 386 Debug
    Registers debugging. It can set Hardware Break Point like TURBO DEBUGGER.
        In 12/92, GAMETOOLS V2.9 is released and uploaded to Internet as
    a freeware. This version is more user-friendly and with less bugs.
        In 1/92, GAMETOOLS V3.0 is released and uploaded to Internet as a
    shareware. This version includes a colorful internal debugger.

Memory requirement:

        There are three version of 3.23
        Version                                           Main memory need
    -----------------------------------------------------------------------
        G3.EXE   ( use conventional memory only )        : 77536
        G3X.EXE  ( use extended memory only )            : 64112
        G3E.EXE  ( use expanded memory only )            : 11712 (need reg)

        The above figures may be slightly different from yours because of
    different configurations of your computer. The above programs all need
    a 386 CPU to run.
        You must register GAMETOOLS in order to get EMS version.
        To run G3E.EXE, you must have expanded memory. QEMM and EMM386
    is need to be loaded in the config.sys.
        To run G3X.EXE, extended memory is required. XMS driver HIMEM.SYS
    should be added to your config.sys.






Descriptions of all functions:

        After loaded GAMETOOLS, press [PtrScr*] to pop up GAMETOOLS. There
    is a new hot key that is [Alt]+[PtrScr*] which will suspend the game
    and restore all the interrupts so that older programs loaded before
    GAMETOOLS can be popped up. You can use some screen capture programs
    to saved the current screen.

        When you enter numbers in GAMETOOLS, you must add '


 in front of
    the hex number. e.g. $1234. But GAMETOOLS has already pre-typed '



    before you enter the numbers.

        You can also use short-hand to input. CS, DS, ES, SS, PS (PSP),
    AX, BX, CX, DS, SI, DI, BP, SP can be recognized in the input.

        (New function in version 3.21)
        Press [Tab] during inputting address will pop up a address-table
    for choosing. Press [Tab] in Analysis Listing and Internal Debugger
    will save the current address under the highlight bar to the
    address-table.

        Entering GAMETOOLS, you can have the following options to choose.
    Just press the key to choose the option.


1.      [A] - Global Analysis - find the addresses such that their contents
    are increased or decreased according to your specifications. It is used
    to find the locations of memory storage of the life or power inhe
    game.

        There are two kinds of analyse:
        Sub-function [B] - Byte analysis
                           ^^^^the memory storage is 1 byte

        Sub-function [W] - Word analysis
                           ^^^^the memory storage is 2 bytes

        Analysis is not once only. You may need to do at least two times
    to find out the addresses. e.g. The life & power of you in the game is
    continuous decreasing. To find out the addresses containing the life,
    choose the global analysis in the main menu and enter the DOS path for
    GAMETOOLS to save temporary files. Exit GAMETOOLS and wait until the
    life decrease again. Press [PtrScr*] to pop up GAMETOOLS and analyze
    again. Repeat the procedure at least two times and then choose [L]
    - List addresses in the menu to list out all the addresses found.
        If the changes are not strictly decreasing, you can use the arrow
    keys to select [increase] or [decrease] during each analysis. Then
    press [Enter] to begin analysis.


        Sub-function [L] - List addresses resulted from "Analysis". You
    can have results only after two times analysis. You can use arrows
    to scroll to and fro to view the addresses and press tab to save the
    current address under the highlight bar to the address-table.

        Analysis results will be in the following format :

          the number of times of analysis; the first time is 0.
          only the last 20 results will be kept.
              v  v  v  v
    ANALYSIS  03 02 01 00 <- the first time

    1234:0012 13 12 10 09 <- the contents in each analysis
    1234:0019 31 30 2F 20
    ^the address found

        After analysis, there may be many addresses found. Choose the one
    that are most likely to be the desire address. That address may usually
    have smaller value and small increment. Then change the content of that
    address using the function [V] - RAM view to test if it is really the
    one you want.

                Sub-function [K] - It will put the address in the current
            scroll bar into KEEP list. Byte analysis will put 1 byte
            while Word analysis will put 2 bytes.

                Sub-function [A] - It will set a hardware break point at
            the current address. If the game modify the content of that
            address, GAMETOOLS will pop up automatically and ask you
            whether to modify the game to undead or not. (It will change
            the code to NOPs.)


        Sub-function [R] - initialize the analysis process and ignore the
    pervious results.


2.     [T] - Code tracing. Trace to find the address of the codes that
    change the contents of the address you specified. You first enter an
    address and then return to game. That address will be monitored by
    GAMETOOLS. If the game try to change the contents of that address,
    GAMETOOLS will pop up automatically and tell you the address of the
    codes which have changed the contents. You can also choose to trace
    the game till the content of that address changed to any value or
    specified value. This function can be used to find the codes of the
    game that change the life or power.

        For the four 386 debug registers debugging, there are following
    sub-functions:

        Sub-function [0] - Memory Execution
            When CPU execute at the Break Point address,
            GAMETOOLS will break the game and pop up.
        Sub-function [1] - Memory Write
            When CPU write to the Break Point address,
            GAMETOOLS will break the game and pop up.
        Sub-function [2] - Memory Read/Write
            When CPU read/write to the Break Point address,
            GAMETOOLS will break the game and pop up.
        Sub-function [3] - Memory Write and Decrease
            When CPU change the Break Point address's content to a
            smaller value, GAMETOOLS will break the game and
            pop up.
        Sub-function [4] - Memory Write and Change
            When CPU change the Break Point address's content to a
            different value, GAMETOOLS will break the game and
            pop up.
        Sub-function [5] - Memory Write and Increase
            When CPU change the Break Point address's content to a
            greater value, GAMETOOLS will break the game and
            pop up.
        Sub-function [6] - Memory Change to a specified value
            When CPU change the Break Point address's content to a
            specified value, GAMETOOLS will break the game and
            pop up.

        For sub-function [0] to [2], you have to enter the Size of
    the Break Point address. The Size can be 1, 2, 4. For example, if
    size of the Break Point is 4, the less significant 2 bits will
    be masked (ignored) during Program Counter and Break Point
    address comparsion.

        Auto modify - It will set a hardware break point at the current
    address. If the game modify the content of that address, GAMETOOLS
    will pop up automatically and ask you whether to modify the game
    to undead or not. It will change the code to NOPs.

        Break point 0 may be use by GAMETOOLS during tracing and stepping.

3.      [V] - Internal Debugger. This function is very handy to use.
    You can use arrows, PageUp, PageDn, Home, End to scroll to and
    fro to view the contents of memory locations.
        The assembly codes are printed in differer colors.

        Press [U] to toggle the display of memory in HEX/ASCII codes and
    assembly codes.
        Press [F] to search input string. There are String/Hex searches,
    both limit to 16 bytes length.
        Press [N] to find next matched string.
        Press [W] to change the content of the address that is show on the
    top left corner.
        Press [C] to change the current viewing address.
        Press [T] to trace one step.
        Press [P] to step over one instruction code. It will not trace
    inside the following instructions 'CALL', 'INT', 'LOOP'. The debugger
    will place a hardware break point on the next instruction.
        Press [H] to go to the highlighted address. It just set a hardware
    break point on the highlighted address.
        Press [R] to change the contents of the registers.
        Press [L] to load a program and debug. Please use this command
    only in the command prompt, don't use it when it is running another
    program.
        Press [S] to save a portion of memory to a file.
        Press [Tab] to save the current address under the highlight bar
    to the address-table.
        Press [E] to view the user screen.


4.      [D] - External Debugger. GAMETOOLS will execute an INT 3 and go
    to DEBUG or SYMDEB that is loaded before the game.

        Sub-function [3] - Shell to DEBUG. First, you should load DEBUG
    form DOS and then load and execute GAMETOOLS from DEBUG. Then load
    COMMAND.COM and execute it. Now you can enter your game. When you
    choose sub-function [3] to shell to DEBUG, it actually generate an
    INT 3 inside GAMETOOLS. At this moment, you can disassemble the code
    found from tracing and change the codes to see immediate results.
    Remember that you are still inside GAMETOOLS and do not change any
    registers or enter Q to exit to DOS, or else you system may hang.
    When you finish you job, enter G to return to GAMETOOLS.
        If you want to trace the game at which you break it, choose the
    sub-function [4] to debug the game which actually generate an INT 3
    at the point of exit so that when exiting GAMETOOLS you will return
    to DEBUG and you can use Trace function of DEBUG to trace the game.
    But sometimes when you press [PtrScr*] when DOS function is executing,
    you can not generate an INT 3 at that point because DEBUG may call
    DOS function again which will cause DOS re-entrance problem.
        Sub-function [0] - to restore the address of INT 3 to the original
    address that is the one when GAMETOOLS is first loading because the
    game may change the address of INT 3 to avoid you send break point.
        Sub-function [1] - to toggle between the last changed address of
    INT 3 and the current address of INT 3.


5.      [K] - Keep memory constant. You can enter an address and a value
    so that GAMETOOLS will write that value to the address periodically
    so as to keep it constant. The maximum number of addresses is 9 and
    the address 0000:0000 means no address to be keep constant.
        This function is useful when it is difficult to find all the codes
    that change the life or power. You can first use [A] - Analyze to find
    the address of the life and use [K] - to keep the address constant.
    This procedure may not need any assembly language knowledge.


6.      [I] - Interrupt monitor. GAMETOOLS will pop up automatically when
    specified interrupt is called. The contents of AH, AL, BH, BL, CH, CL,
    DH, DL, SI, DI, BP, SP, DS, ES, SS, CS, IP before and after the
    execution of the interrupt will be displayed on pop up.
        On choosing this option, user will be asked to enter the number of
    the interrupt to be monitored. Then choose to trace or not trace if
    that interrupt is called from DOS. This is useful when you are
    monitoring INT 13H as it allows you to capture those interrupt called
    directly from the game.
        If you need conditional tracing, this means GAMETOOLS will pop up
    automatically only when the contents of the registers match your
    specifications, you can enter the contents of each register so that
    GAMETOOLS will pop up when the registers match what you have entered.
    Enter [*] for all matches.
        e.g. If you enter AH=0, GAMETOOLS will pop up only when AH=0
    before executing the INT.


7.      [E] - User screen. View the game screen.


8.      [B] - Restore Keyboard and Video states

        Sub-function [0] - Restore INT 8, 9, 16 to the original address
    that is the address when GAMETOOLS is first loaded and change video
    mode to TEXT mode 3.
        Sub-function [1] - Change INT 8, 9, 16 and video states to the
    saved addresses and video states that are saved in the last operation
    of the function [Debugging]-[Debug the game]. When you use the
    [Debug the game] function, GAMETOOLS will change and save the keyboard
    and video states so that you can use keyboard and screen to do
    debugging. If then you want to continue to play the game, use this
    function to restore the keyboard and video to the last saved states.


9.      [S] - Shell to DOS. Please do not change the default directory
    in any drives, otherwise the game can not find its files.
        Sometimes, because of the conflicts between GAMETOOLS and the
    game, the system may hang.


10.     [Q] - Exit the game and back to DOS. Sometimes, because of the
    conflicts between GAMETOOLS and the game, the system may hang.


11.     [C] - Change the frequency of the clock. That is the frequency of
    the occurrence of INT 8. The current frequency is showed on the top
    of the screen.

        Sub-function [0] - Change the frequency to zero.
        Sub-function [1] - Change the frequency to normal (18.2Hz).
        Sub-function [2] - Change the frequency to your input value.

        This function can be used to increase or decrease the speed of
    the game. Usually, increase the frequency will increase the speed
    the game.


12.     [U] - Uninstall GAMETOOLS. If you load other TSR after GAMETOOLS,
    you may not uninstall it. Try to uninstall all the TSR load after
    GAMETOOLS.


13     [P] - Change the Hot-key of GAMETOOLS.








How to modify the game to undead?

Using Internal Debugger:

        1. execute GAMETOOLS
        2. run the game
        3. use Global Analysis function to find the addresses containing
           the life or power in the game.
        4. use Internal debugger's RAM view to modify the contents of
           those addresses found to see which one is desired.
        5. use Hardware Break Point to trace where the game modify the
           addresses found.
        6. use Internal debugger's debugging function to disassemble and
           modify the code and see the immediate results.
        7. if can't find the codes or don't know how to modify them,
           use Keep function to keep the life or power constant when
           playing the game.
        8. if you can successfully modify the game to undead, record that
           portion of codes and shell to DOS to use some HEX file editor
           to search and modify the executable files after exiting the game.
        9. if cannot find them using HEX file editor, the executable files
           may be packed by some executable file compressors. Use UP.EXE
           to unpack the files and search again.

Using External Debugger:

        1. Load DEBUG or SYMDEB.
        2. Load GAMETOOLS inside the debugger
        3. execute it
        4. Load COMMAND.COM and run inside the debugger
        5. run the game
        6. use Global Analysis function to find the addresses containing
           the life or power in the game.
        7. use RAM view to modify the contents of those addresses found
           to see which one is desired.
        8. use Hardware Break Point to trace where the game modify the
           addresses found.
        9. use [shell to debug] function to use debug to disassemble and
           modify the code and see the immediate results.
       10. if can't find the codes or don't know how to modify them,
           use Keep function to keep the life or power constant when
           playing the game.
       11. if you can successfully modify the game to undead, record that
           portion of codes and use some HEX file editor to search and
           modify the executable files after exiting the game.
       12. if cannot find them using HEX file editor, the executable files
           may be packed by some executable file compressors. Use UP.EXE
           to unpack the files and search again.





















How to crack password protection?

Using Internal Debugger:

        1. execute GAMETOOLS
        2. run the game
        3. When the program ask you to enter password, pop up GAMETOOLS
           and use Internal Debugger function to debug the game.
        4. Use function [H] to set break point at the codes RET, RETF.
        5. Trace the codes and return to the caller routines.
        6. See if there are comparsion codes below the caller routines
           e.g. OR AX, AX ; CMP AX, 0 ;
        7. Modify comparsion codes and see what happen.
        8. Do the similar thing as modifying the game to undead.

Using External Debugger:

        1. Load DEBUG or SYMDEB.
        2. Load GAMETOOLS inside the debugger
        3. execute it
        4. Load COMMAND.COM and run inside the debugger
        5. run the game
        6. When the program ask you to enter password, pop up GAMETOOLS
           and use [Debug the game] function to debug the game.
        7. try to understand what are the game doing.
        8. Modify the game
        9. Do the similar thing as modifying the game to undead.



















Use GAMETOOLS in QEMM, DV or WINDOWS 3.1:

    GAMETOOLS can not be runned under DV. If you load DV after GAMETOOLS,
    GAMETOOLs will be disable when DV is running and will be reenable
    after DV is finished.

    GAMETOOLS can be runned in WINDOWS 3.1 dosprompt provided that the
    the EMS Memory locked option in advanced options of the DOSPRMPT.PIF
    is setted. Under WINDOWS 3.1, the hardware breakpoint function can
    not function properly.













Distribution of GAMETOOLS:

    You are encouraged to distribute the original package to anywhere
    by uploading it to Local BBS, anonymous ftp sites.

    You can now find the most updated version of gametools in

    Hong Kong BBS:

        Conqueror BBS, 6:700/392, 55:400/13, SysOp:Billy Or, 852-856-1379

    FTP sites:

        ftp.uwp.edu : /pub/msdos/romulus/cracks

        wuarchive.wustl.edu : /pub/MSDOS_UPLOADS/games/Cheat/GameTools
        (^the file can be kept there for a very short time)
        
    Or finger me to get the uuencoded file:

        finger cs_wwkin@uststu.ust.hk | uudecode


Registering GAMETOOLS:

    GAMETOOLS is released as a shareware program. This method gives the
    user the opportunity to evaluate the program before actually
    registering the software. If after a one month evaluation period you
    determine that GAMETOOLS meets your needs, you are required to
    register your copy of GAMETOOLS. After registration you are free to
    use it and will get free upgrade for one year.
    If you are a student, you can get 10% discount on the product.
    If you are a UST student (My classmate?), you can get 20% discount on
    the product.
    To register your copy of GAMETOOLS, complete the registration form
    that is distributed with the package, include your payment and mail to

        [Gametools Registration]
        P.O. Box 80044,
        Cheung Sha Wan Post Office,
        Hong Kong.

    When your registration form is processed you will be mailed or e-mailed
    a password to unpack GT3-R.ARJ and an individual serial number that
    allow you to register EMS version of GAMETOOLS which need 11k
    conventional memory only so that you have more rooms to load other
    programs. You can also get an updated version of UP.EXE and TURBO C
    source codes of TSRCRACK in GT3-R.ARJ

    You can contact the author through e-mail:

        Internet e-mail address:
                cs_wwkin@stu.ust.hk
















Discliamer:

    GAMETOOLS is supplied as is.  The author disclaims all warranties,
    expressed or implied, including, without limitation, the warranties
    of merchantability and of fitness for any purpose.  The author
    assumes no liability for any damages, direct or consequential, which
    may result from the use of, or inability to use GAMETOOLS.