💾 Archived View for zaibatsu.circumlunar.space › ~solderpunk › phlog › lead-acid-life.txt captured on 2023-01-29 at 16:19:41.
⬅️ Previous capture (2020-09-24)
-=-=-=-=-=-=-
Lead acid life -------------- Melton's recent post[1] on (among other important and interesting things) the state of his home solar battery power system got me thinking again about taking my own first steps in this direction. I mentioned previously that I thought I might think about an emergency power solution to get me through prolonged outages (as part of my general 72 hour preparedness plan) as a sort of tentative first step toward one day being self-sufficient for power, or close to it. My plan for this has always revolved around 12V lead acid batteries, which are cheap and simple and safe, compared to anything else. I want solutions I can understand and repair myself from scratch or as close to it as possible. LiPo batteries are great, but they are own practical if every battery has a tiny computer in it, constantly and obsessively monitoring everything about the battery to keep it working safely. That's pretty much the antithesis of what I'm going for. I always thought this would provide a good excuse to master the MC34063 chip, which I bought a couple of cheaply a while ago. This is a dead simple and dirt cheap "jellybean" DC-DC converter chip from the 80s, which could be used to turn 12V into 9V or 5V or 3.3V as needed for various applications, without the huge wasted power and heatsink requirements that would come from doing this with a linear regulator like a standard LM7805. The MC34063 is by no means the best chip for this, but it is a simple, classic part, made by many different manufacturers. You'll be able to scavenge MC34063s pretty much anywhere on Earth after a hypothetical postapocalyptic collapse of society, so they're a good thing to know how to use well. However, during my thinking and reading on this, I realised that there's something that can be built entirely with off-the-shelf parts and very little electronics knowledge or skill whatsoever which could potentially be really useful for this kind of application. Not that I am opposed to acquiring electronics knowledge or skills, on the contrary, I love it, but I also get excited about simple "everyman" hacks that are widely accessible. The idea is to buy a cheap 12V SLA battery, a car cigarette lighter socket (the female part), a fuse, some cable and a decent quality car USB adaptor. None of these things should be hard to find or terribly expensive for most people, and they're dead simple to put together into something which could be used during blackouts to recharge phones/tablets/etc., run a RaspberryPi or similar, or do anything you can do with a working USB port (and Ikea sell a dirt-cheap USB charger for NiCd or NiMH AA batteries which I have heard good things about). If you keep your battery topped up from the mains power in storage, you should be able to get a few emergency charges of your 5V devices during a long outage, and then you can recharge the battery from the mains afterward, ready for next time. This seems to me like a pretty useful and practical DIY project. Of course, you can then look into ways of recharging the battery without grid power if you want, so it's kind of a gateway project to off-grid life. I'm fairly excited about this, but at the same time, I wonder about the real utility of it. Part of my 72 hour prepping threat model is to assume that all communications utilities are down for those 72 hours. As part of this I have a multi-band radio and a stash of spare AA batteries for it, and hopefully this will provide me with any important news during some kind of diaster scenario. That radio will happily run for weeks off one set of batteries with standard usage, so relying on it for 72 hours doesn't actually require anything like this at all. And if the internet is down and the cell towers are down, I don't really care all that much if my phone is fully charged. Well, the GPS functionality of a phone or tablet could be handy if the situation escalated to involve evacuation, but for the most part, if the networks are down my phone is basically useless to me. I have a fireplace in my house so I could burn wood to keep warm during the winter, and I have an alcohol burning camp stove I could use to heat food or boil water. The only thing I would really need electricity for at all which could plausibly be provided for 72 hours by something like a motorcycle battery is light. We have LED headlamps which take AAAs, so I guess being able to charge AAAs would be useful, and it might sometimes be nice to have something that could light the whole room. Maybe I should look into rigging something up with those superbright LED stars. It would not be much use in an emergency, except in some wild fantasy where computer geek preppers exist in sufficiently high density to support some kind of mesh network, but I am curious how long a Raspberry Pi using WiFi could be run in this way. Wait, why am I talking like this is some kind of empirical question I can't figure out for myself? Some random Stack Exchange post[2] suggests an idle RPi3 draws 1.15W and fully-loaded draws 3.6W, so let's say something like 2W mean. That's 48Wh per day. Let's ballpark the efficiency of our car USB adapter at 75%, so the battery has to supply 64Wh per day. At 12V, that's about 5.2Ah per day (if I stuffed any of this up, please email me!. Without shopping around at all, I've found a 5Ah 12V SLA battery from a Finnish webstore for 25 euro (about 30 USD), not much. Of course, you can buy much larger batteries, and you shouldn't discharge SLA batteries completely if you can help it. Let's say you were disciplined and computed for 2 hours every day, you'd use 14 hours of power in a week, or about 60% of the capacity of that 25 Euro battery. That's not bad at all. Of course, this doesn't take the *display* into account, which kind of shoots this whole thing down. Hmm, people were talking about using eInk for terminal devices a little while back in the phlogosphere, weren't they... [1] gopher://sdf.org:70/0/users/melton/phlog/02042018 [2] https://raspberrypi.stackexchange.com/questions/5033/how-much-energy-does-the-raspberry-pi-consume-in-a-day