💾 Archived View for mirrors.apple2.org.za › archive › www.textfiles.com › apple › DOCUMENTATION › ke… captured on 2023-01-29 at 11:50:27.
-=-=-=-=-=-=-
APPLE II KERMIT USER GUIDE
VERSION 3.87
Ted Medin, NOSC
1990 Oct 10
Copyright (C) 1981,1989
Trustees of Columbia University in the City of New York
Permission is granted to any individual or institution to use, copy,
or redistribute this document so long as it is not sold for profit, and
provided this copyright notice is retained.
1. Apple II Kermit Page 1
-------------------------------------------------------------------------------
1. Apple II Kermit
Authors: Antonino N. J. Mione (Stevens Institute of Technology),
Peter Trei (Columbia University),
Ted Medin (NOSC),
Bob Holley (SERDAC)
Version: 3.87
Date: 1990 Oct
Kermit-65 Capabilities At A Glance:
Local operation: Yes
Remote operation: Yes
Transfers text files: Yes
Transfers binary files: Yes
Wildcard send: Yes
^X/^Y interruption(Q): Yes
Filename collision avoidance: Yes
Can time out: Yes
8th-bit prefixing: Yes
Repeat count prefixing: No
Alternate block checks: No
Terminal emulation: Yes (VT52, VT100)
Communication settings: Yes
Transmit BREAK: Yes
IBM communication: Yes
Transaction logging: No
Session logging (raw download): Yes
Raw upload: No
Act as server: Yes
Talk to server: Yes
Advanced commands for servers: Yes
Long packets: Yes
Sliding windows: No
Local file management: Yes
Handle file attributes: Yes
Command/init files: Yes
Printer control: Yes
Kermit-65 is a program that implements the Kermit file transfer protocol for
the Motorola 6502 processor family (hence the name, Kermit-65) on the Apple II
microcomputer system. It is written in 6502 assembly language and should run
on any Apple II or compatible running DOS 3.3 or PRODOS. This section will
describe the things you should know about the file system in order to make ef-
fective use of Kermit, and then it will describe the special features of the
Kermit-65 program.
1.1. Supported Systems and Devices Page 2
-------------------------------------------------------------------------------
1.1. Supported Systems and Devices
There are several different Apple II's which can run Kermit-65. Kermit will
have no problems running on an Apple II, II+, //e, //c or //gs system. Of the
different communication devices available for the Apple II, Kermit-65 supports
the ones shown in Table 1-1.
-------------------------------------------------------------------------------
AE Serial Pro (super serial driver - sw 1 & 3 open 2 & 4 closed)
AIO II (Uses the Apple Com Card driver??? - untested)
ALS dispatcher (Uses the Apple Com Card driver)
Apple Cat Serial Card
Apple Com Serial Card
ASIO (Uses the Apple Com Card driver??? - untested)
Apple Super Serial Card & //c Serial Port
Apple //gs Serial Port
CCS 7710 Serial Card
CCS 7711 (Uses the Apple Com Card driver??? - untested)
D.C. Hayes Micromodem.
Microtek sv-622 Card
Prometheus Versacard (Uses the Apple Com Card driver)
SSM AIO (Uses the Apple Com Card driver??? - untested)
Table 1-1: Apple II Communication Cards Supported by Kermit-65
-------------------------------------------------------------------------------
It is possible that other cards may have operational characteristics very
similar or identical to one of the devices above. If this is the case, it may
work using one of the currently available device drivers. The user may want to
try each of the above options to see if any of them work. Kermit-65 must be
told in which slot the card resides. This may be done with the 'SET' command
(documented below).
1.2. The DOS 3.3 File System
Items of importance which will be discussed in this section include filenames
and file characteristics.
Apple DOS Filenames
Filenames under Apple DOS may contain almost any ASCII character (including
space). It is not recommended that special characters, (i.e. control characters
or spaces) be used in a filename to be transferred by Kermit-65 since they may
cause problems when parsing the filename. Filenames may be up to 40 characters
in length.
Apple DOS File Characteristics
All files in Apple DOS have a file type associated with them which is contained
1.2. The DOS 3.3 File System Page 3
-------------------------------------------------------------------------------
in the directory entry for the file but is not part of the filename itself.
There are four types of files in DOS 3.3. They are:
1. APPLESOFT BASIC
2. INTEGER BASIC
3. BINARY
4. TEXT
All file types have their data stored in eight-bit bytes although not all of
them need the eighth bit. The two file types containing basic programs required
the eighth bit due to the nature of the data being stored. BINARY files are
images of memory copied into a file. Often, these are machine code programs.
These files require all eight bits. TEXT files normally contain only printable
or carriage control characters. They are stored in the form of seven-bit ASCII
characters but the eighth bit should always be set since Apples manipulate all
text internally as 'Negative ASCII'. When transmitting non-text files the user
must insure that both Kermits are handling eight-bit data so that no infor-
mation is lost. If an eight-bit data path is not available (i.e. the remote
Kermit needs to do parity checking with the eighth bit), then eight-bit quoting
should be used. Of course, BINARY files as well as Apple BASIC files will not
have much meaning on a different system. If the user desires to edit a BASIC
file on a mainframe, for instance, s/he must convert it to a TEXT file before
sending it over. After receiving the file back on the Apple, the user may con-
vert it back to BASIC once again. The reason BASIC files would be meaningless
to a different machine is that the Apple stores BASIC keywords as single
character tokens to save space and processing time. To convert a BASIC program
to and from a TEXT file, consult the Apple DOS 3.3 Manual. File information
can be obtained by issuing the CATALOG command. For example:
]CATALOG
DISK VOLUME 010
*A 002 HELLO
B 078 KERMIT
A 002 READER
T 005 TESTFILE
]
When Kermit-65 is receiving a file, the file it creates on diskette will be of
the type indicated by the FILE-TYPE parameter. The file will always be left in
an unlocked state after it is closed by Kermit-65. When sending a file,
Kermit-65 will use the FILE-TYPE parameter to determine how to detect an
End-of-file condition. Thus, it is important to have this set properly in all
cases.
Recommendations for Archiving Files
When using a large system for archiving purposes, there is no reason to convert
Apple Basic programs into text files before sending them if there is no need to
edit them on the mainframe. The FILE-TYPE parameter must always be set cor-
rectly when sending and receiving files. The procedure for archiving files is:
1. Run Kermit on remote system.
1.2. The DOS 3.3 File System Page 4
-------------------------------------------------------------------------------
2. SET FILE-TYPE TEXT (or APPLESOFT or ...) on Kermit-65.
3. Send the files.
1.3. The PRODOS File System
The PRODOS system is essentially the same as the DOS system with the exception
that performance has been improved, hardware usage has been expanded and file
names have different syntax. File names are the major importance to the Kermit
system. File names have the following syntax:
/volname/subdirectory1/.../subdirectoryn/filename
where "volname" is the volume name where the file is located. Subdirectory(n)
is a subdirectory on the volume and may be omitted. Filenames are much more
restrictive than DOS filenames. PRODOS filenames are limited to 15 characters
with no embedded spaces and few special characters, and must begin with an al-
phabetic character. /volname/sub ... may be omitted from the filename by use
of the SET PREFIX command.
Binary file transfer using PRODOS has its dangers when creating new files.
PRODOS keeps the file's size and starting location in the directory which is of
course not transferred. Therefore a new binary file will have its starting
location 0 which can cause some interesting problems if you try and BRUN the
file. Basic files all start at $801 (it says here) so Kermit creates new basic
files with a starting address of $801.
1.4. Program Operation
Prior to using Kermit-65 for transferring files, the modem interface must be
set to handle data in a certain manner. First, the data format should be 8
data bits and 1 stop bit. Second, the card should be set to no parity. The
baud rate (if adjustable) must be set to whatever rate the modem can handle.
For the D.C. Hayes Micromodem, these parameters are set correctly by default,
so very little has to be done. For the Apple Super Serial Card these are set
from within Kermit-65 except the interrupt switch (sw6-2) which must be set for
interrupts on. For the Microtek SV-622, all applicable parameters are set by
Kermit-65. Some mainframes may need parity checking (i.e. most IBM machines).
In this case some parity setting (other than none) will usually work. When
talking with such mainframes, binary and basic files on the Apple cannot be
transferred unless Eighth-bit-quoting is acceptable to the host. If you have
the parameters set correctly then the "CONNECT" command will start Kermit talk-
ing out the communication port.
File transfer is very dependent upon parity. Make sure the host and local
parity are the same. Following are a couple of site's method for file transfer.
We have an IBM 3033 and 4381 and use both 3705/3725 and 7171 or Series/1 front
ends. The differences in front ends as far as any microcomputer Kermit is con-
cerned duplex (local-echo on for the 3705, local-echo off for the 7171 or
Series/1), parity (the two front ends might use different parity, e.g. Mark for
the 3705 and Even for the 7171), and flow control (None for the 3705, XON/XOFF
for the 7171).
In Kermit-65, IBM mainframe users need to set the following parameters:
1.4. Program Operation Page 5
-------------------------------------------------------------------------------
BAUD Whatever is supported.
PARITY EVEN, ODD, or MARK, whatever your front end requires.
FLOW XON for the 7171, NONE for the 3705.
FLOW DELAY 00
LOCAL-ECHO OFF for 7171, ON for 3705
In Kermit-65, SERDAC VAX 8800 users need to set the following parameters:
BAUD SERDAC Dial-up & 300, 1200, or 2400 baud
FIRN Dialup:(the highest your modem and the dial-up connec-
tion will support) )
Ethernet Hardwire: 300, 1200, 2400, or 4800 baud.
PARITY NONE
FLOW XON
FLOW DELAY 00 (higher for printers, logging, or "slow" Apples)
LOCAL-ECHO OFF
NOTE: If you want to do a binary file transfer (Apple binary or BASIC
files) via a FIRN Network connection to the SERDAC VAX
8800, you must SET PARITY SPACE before the transfer is in-
itiated; that will insure that eight-bit quoting is used.
If you dial directly into the VAX 8800, SET PARITY NONE;
eight-bit quoting (which is less efficient) is not re-
quired.
Conversing With Kermit-65
Kermit-65 reads file KERMIT.INIT from the default drive when started. The
lines of this file are executed one at a time starting at the beginning. This
file should be an ASCII text file and contain commands to set up Kermit's
parameters as desired. It will also execute Kermit's other commands. However,
any command which reads a file (like MODEM) or leaves local mode (like CONNECT)
will terminate reading of this file and continue with the command specified.
Use your favorite editor to produce this file. Here's a sample:
set display 80 3
set keyboard 2e
set baud 4800
modem
Kermit-65's prompt is "Kermit-65>". To run Kermit-65 and issue commands to it,
type "brun kermit". Example:
]BRUN KERMIT
NOSC/STEVENS/CU - APPLE ][ KERMIT-65 - VER 3.87
Kermit-65>send testfile
1.4. Program Operation Page 6
-------------------------------------------------------------------------------
(file is sent...)
Kermit-65>status
(performance statistics are printed...)
Kermit-65>(other commands...)
.
.
.
Kermit-65>exit
]
Like many Kermit programs, Kermit-65 uses a DEC-20 style command parser.
During interactive operation, you may use the ?-prompting help feature ("?")
and recognition (ESC) features while typing commands. A question mark typed at
any point in a command displays the options available at that point; typing an
ESC character causes the current keyword to be completed (or default value to
be supplied). If you have not typed sufficient characters to uniquely specify
the keyword (or if there is no default value) then a beep will be sounded and
you may continue typing. Keywords may be abbreviated to any prefix that is
unique.
Remote and Local Operation
Kermit-65 is normally run in local mode. It may be run as a remote Kermit as
well although there is no advantage to doing things that way. Kermit-65 sup-
ports User-mode commands for talking to a Server, and it does support a limited
server mode.
1.5. Kermit-65 Commands
1.5.1. The CATALOG Command
Syntax: CATALOG
or LS
Typing CATALOG produces a catalog (directory) listing of your default drive.
1.5.2. The CONNECT Command
Syntax: CONNECT
Establish a terminal connection to the remote system using all the current SET
parameters for terminal type, speed, parity, etc. Get back to Kermit-65 by
typing the escape character followed by the letter C. The escape character is
Control-@ by default. When you type the escape character, several
single-character commands are possible. These are shown in Table 1-2.
You can use the SET ESCAPE command to define a different escape character.
When CONNECTed, Kermit-65 will be passing characters entered on the keyboard to
the remote system, and passing characters from the remote system to the Apple
1.5.2. The CONNECT Command Page 7
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
? List all the possible single-character arguments.
B send a Break signal.
C Command mode (returning to kermit-65).
D Drop the phone line to the remote and return to Kermit-65.
E Erase the screen (useful for clearing garbage on screen).
K toggle Keypad application-mode on/off.
M execute the Modem command.
P toggle the Printer on/off.
Q execute the Quit command.
R pRint the screen, >= //e required
S show Status of the connection.
V cursor-keys-Vt100 toggle.
W sWap the del and backspace key.
0 send a null (ASCII 0).
^@ (or whatever the Connect-Escape character is): send the
Connect-Escape character itself.
Table 1-2: Kermit-65 Single-Character CONNECT Escape Commands
-------------------------------------------------------------------------------
screen. Incoming characters are interpreted according the selected terminal
type (see SET TERMINAL).
On an Apple II+ with an incomplete keyboard, special characters can be typed by
prefixing regular characters with a right-arrow. On uppercase-only screens,
uppercase characters are shown in inverse and lowercase characters are dis-
played as normal uppercase characters.
Here are the rules for using the special 2/2+ input, to get all printable ASCII
characters, and how they appear on the screen. Special meanings are applied in
various contexts to certain characters. The left and right arrow keys do spe-
cial things, and sometimes the escape key does as well. For letters, the
keyboard is always in either default UPPERCASE mode or default lowercase mode.
When in UPPERCASE, all letters typed are sent out as uppercase. In lowercase,
all letters are sent as lowercase. To reverse the case for the next character
only, hit the right-arrow ("prefix") key. To switch the default case, hit the
prefix-key twice in a row. For funny characters, the prefix key is also used
to get the unusual punctuation characters which are not on the Apple keyboard.
Table 1-3 shows the Apple II/II+ keyboard escapes; the letter "p" represents
the prefix character.
The left-arrow key sends a rubout (ASCII 127). With left-arrow and right arrow
doing special things, it's a little hard to enter their characters (^H and ^U
respectively). There is therefore an escape from prefix mode sequence. If you
type prefix-ESC, the next character is sent without any interpretation. If you
have the capability for upper/lower case, etc, then use the 'SET KEYBOARD' and
'SET DISPLAY' commands to specify complete keyboards.
While in connect mode if you have a //e or better with 80 column display, the
cursor will blink. The rate of blink is tied to the "SET TIMING" constant.
Also the screen will be restored to state of the previous connect(if any).
1.5.3. The DELETE Command Page 8
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
To Get Type Appearance
Left Square Bracket p( [
Right Square Bracket p) ]
Left Curly Bracket p< {
Right Curly Bracket p> }
Underline p- _
Backslash p/ \
Tilde (wiggle) p^ ~
Vertical Line p. |
Table 1-3: Apple II/II+ Keyboard Escapes
-------------------------------------------------------------------------------
1.5.3. The DELETE Command
Syntax: DELETE filespec
or RM filespec
Typing DELETE causes the file specified to be deleted.
1.5.4. The EXIT and QUIT Commands
Syntax: EXIT or QUIT
Exit from Kermit-65. When using dos 3.3 you can probably restart the program,
provided you haven't run anything else, by typing 'CALL 4096'.
1.5.5. The GET Command
Syntax: GET remote-filespec[,local-filespec]
The GET command requests a remote Kermit server to send the file or file group
specified by remote-filespec. This command can be used with a Kermit server on
the other end. The remote filespec is any string that can be a legal file
specification for the remote system; it is not parsed or validated locally. So
if the remote Kermit supports wildcards you can specify them in the
remote-filespec. Local-filespec is optional and is the file name to be used
locally. The "\" escape character may be used to accept the next character of
the filespec asis and two escape characters will parse to a single "\". If the
remote Kermit is not capable of server functions, then you will probably get an
error message back from it like "Illegal packet type". In this case, you must
connect to the other Kermit, give a SEND command, escape back, and give a
RECEIVE command. Currently, a packet can be retransmitted manually by typing
anything on the keyboard. If a 'Q' is typed, the entire transmission will be
canceled. During file transfer if the remote kermit supports file attributes
then the percent of the file transferred will be accurate else 0.
1.5.6. The HELP Command Page 9
-------------------------------------------------------------------------------
1.5.6. The HELP Command
Syntax: HELP
Typing HELP alone prints a brief summary of the Kermit-65 commands.
1.5.7. The LOCK Command
Syntax: LOCK filespec
LOCK will file lock the given filespec on the default drive.
1.5.8. The LOG Command
Syntax: LOG filespec
When connected to a remote site, log the remote session's output to the
specified file. The file type and file warning protocols are observed. This
command is dependent upon the flow control (XON/XOFF) working. Without flow
control there is little possibility of getting a correct copy of the terminal
session. The logging begins when you connect to the remote and is terminated
when you escape back to the local Kermit with the ESCAPE character followed by
the "C" command.
1.5.9. The MODEM Command
Syntax: MODEM
This command is designed for the hayes smart modem. Typing MODEM causes the
file KERMIT.MODEM in the default drive/path to be used as a menu. You will be
able to select any line in the file to be sent to the modem. Sorry, you can't
back up to a previous menu, you will have to Quit and execute MODEM again. A
"CONNECT" response from the smart modem will cause Kermit to leave the modem
command and execute the CONNECT command. The Hayes smart modem must reply with
text status responses (not numbers). One command per line with comments al-
lowed after the first space (blank). Use your favorite editor to produce this
ASCII text file. Since the attention Hayes command (AT) requires a delay the
"&" character becomes the time delay for Kermit. Each "&" causes a delay of
one second on a 6502 chip. If you have a //gs or an accelerator board you may
have to use the SET TIMING command to produce a one second delay. If you
really need to send the "&" character to the modem then the "\" is the escape
character. Put a "\" before any character and that character will be sent as
is. Of course two "\"'s will produce one "\". Normally Kermit will wait for 27
seconds (again on a 6502 chip) for the modem to respond, but any character
typed on the keyboard will terminate this wait. You may hear the busy signal
and there is no sense waiting any longer, so hit (ouch!-not so hard) any key on
the keyboard.
Following is an example of the KERMIT.MODEM file:
+++&&ATH Get the Hayes Smartmodem's attention and then hang up.
ATDP1234567 Call your local BBS with pulse dialing.
ATDT8901234 Call your work dialup phone with touch tone dialing.
1.5.10. The RECEIVE Command Page 10
-------------------------------------------------------------------------------
1.5.10. The RECEIVE Command
Syntax: RECEIVE [filespec]
The RECEIVE command tells Kermit-65 to receive a file or file group from the
other system. If only one file is being received, you may include the optional
filespec as the name to store the incoming file under; otherwise, the name is
taken from the incoming file header. If the name in the header is not a legal
filename, Kermit-65 will attempt to change it into something legal. If
FILE-WARNING is on and an incoming file has a name identical to a file already
existing on the diskette, Kermit-65 will issue a warning to the user and at-
tempt to modify the filename to make it unique. Currently, a packet can be
retransmitted manually by typing anything on the keyboard. If a 'Q' is typed,
the entire transmission will be aborted. During file transfer if the remote
kermit supports file attributes then the percent of the file transferred will
be accurate else 0. Filespec is required when xmodem protocol is used.
1.5.11. The REMOTE Command
Syntax: REMOTE [option character-string]
The only option currently is "kermit". This command submits the command
"character-string" to the remote Kermit's command processor. Long replies are
not paged so you will have to use ^S to stop the screen. The obvious usage is
for setting and showing parameters on the remote Kermit.
1.5.12. The RENAME Command
Syntax: RENAME filespec,new-filespec
RENAME will rename filespec to new-filespec on the default drive.
1.5.13. The SEND Command
Syntax: SEND filespec[,remote-filespec]
The SEND command causes a file to be sent from the Apple to the remote system.
The Filespec is the name of the file on the Apple diskette to be sent. The
parser will not accept control characters and certain special characters in a
filename (like comma). The "\" escape character may be used to accept the next
character of the filespec asis and two escape characters will parse to a single
"\". Remote-filespec is optional and is the name of the file on the remote
kermit. Thanks to Dick Atlee, wildcards are now acceptable when sending files
(they have always been acceptable when receiving files). The "*" is a multiple
character wildcard and the "=" is a single character wildcard.
The default disk drive is used for file transfers this can be changed with the
'SET DEFAULT-DISK'(DOS) or 'SET PREFIX'(PRODOS) command (explained below). As
a file is being sent, the screen displays 'RECEIVING NUMBER OF BYTES' and
'SENDING NUMBER OF BYTES' with the decimal number of bytes transferred since
start of transmission. If a packet must be transmitted several times and it
reaches the maximum retry count, the transfer will fail and the 'Kermit-65>'
prompt will return. If the remote Kermit sends an error packet, the text of the
1.5.13. The SEND Command Page 11
-------------------------------------------------------------------------------
packet will be displayed on the screen, the transfer will fail, and the prompt
will return. Currently, a packet can be retransmitted manually by typing any-
thing on the keyboard. If a 'Q' is typed, the entire transmission will be
aborted.
1.5.14. The SERVER Command
Syntax: SERVER
Typing SERVER alone turns Kermit into a file server to a remote Kermit. Cur-
rently server mode will handle remote "send", "get", "remote" and "fin" com-
mands. Variants of the above commands will probably work but file serving is
very limited at present. Because the Apple requires knowledge of file types
you can use the "remote Kermit" (or whatever the remote Kermit's syntax is)
command to set the file-type on the server. Yes, the server will execute any
command so you can really get the server into trouble (this is not a BBS). You
must have the appropriate file type set before transferring files. You can
exit server mode by typing Control-C (^C) when not doing file transfers or the
remote can of course terminate via the "fin" command.
1.5.15. The SET Command
Syntax: SET parameter [option [value]]
Establish or modify various parameters for file transfer or terminal connec-
tion. You can examine their values with the SHOW command. The following
parameters may be SET:
APPLICATION-MODE Set VT100 gs keypad in/out of application mode.
BAUD Which baud rate should the com card use?
CLEAR-SCREEN Should screen be cleared when returning from connect?
CURSOR-KEYS-VT100 In VT100 mode cursor keys give VT100 sequences.
DEBUGGING TERSE or VERBOSE packet information.
DEFAULT-DISK Which Diskette drive is used for DOS 3.3 file transfer?
DISPLAY Which type of screen display is being used?
ESCAPE Character for terminal connection.
FILE-TYPE Type of Apple file being sent/received.
FILE-WARNING Warn users if incoming file exists?
FLOW Should xon/xoff flow control be used to the remote?
KEYBOARD II+ or //e keyboard.
LOCAL-ECHO Full or half duplex switch.
PARITY Character parity to use
PREFIX Which default prefix to use with PRODOS?
PRINTER Should the printer be used for the display?
PROTOCOL Which protocol is to be used for file transfer.
RECEIVE Various parameters for receiving files
SEND Various parameters for sending files
SLOT Which slot # is communication device in?
SWAP Swap the del and backspace key?
TIMER Should Kermit observe the receive timeout value?
TIMING Change the time loop for 1 ms. delays.
TERMINAL Which type of terminal should Kermit emulate?
1.5.15. The SET Command Page 12
-------------------------------------------------------------------------------
SET APPLICATION-MODE
Syntax: SET APPLICATION-MODE {ON, OFF}
For VT100 emulation with a gs keypad you can set the keypad in or out of ap-
plication mode. Some computer systems set this via escape sequences so it may
not be necessary to use this command.
SET BAUD
Syntax: SET BAUD value
Value is the baud rate for your communication card. For the super serial and
the microtek it can be 300 to 19200. The actual values will depend upon the
com card you are running with.
SET CLEAR-SCREEN
Syntax: SET CLEAR-SCREEN {ON, OFF}
When returning from a connect the screen will be cleared if on. This is for a
//e or better machine.
SET CURSOR-KEYS-VT100
Syntax: SET CURSOR-KEYS-VT100 {ON, OFF}
In VT100 emulation the cursor keys can also emulate the VT100 cursor keys.
SET DEBUGGING
Syntax: SET DEBUGGING {TERSE, VERBOSE, OFF}
Record the packet traffic on your terminal. Options are: TERSE, Show packet
info only (brief). VERBOSE displays packet field descriptions with packet info
(lengthy). OFF disables display of debugging information (this is the
default).
SET DEFAULT-DISK
Syntax: SET DEFAULT-DISK {SLOT, VOLUME, DRIVE} value
This DOS command will tell Kermit-65 which disk drive should be used for file
transfers. The three parameters which may be set separately are SLOT, VOLUME
and DRIVE. The value for SLOT ranges from 1 to 7. The value for DRIVE is ei-
ther 1 or 2. The value for VOLUME ranges from 0 to 255.
SET DISPLAY
Syntax: SET DISPLAY {2E, 2P}
1.5.15. The SET Command Page 13
-------------------------------------------------------------------------------
or SET DISPLAY 80-COL number
This command will tell Kermit-65 which kind of screen display you want to use.
If you have an Apple II or II+ without an 80 column card, use the first syntax.
If you have any kind of an Apple with an 80 column card, enter: SET DISPLAY 80,
followed by a space and the slot number where the card resides (if you don't
know the slot number, or the card is built-in to the set, try 3 ).
SET ESCAPE
Syntax: SET ESCAPE hexadecimal-number
Specify the control character you want to use to "escape" from remote connec-
tions back to Kermit-65. The default is 0 (Control-@). The number is the hex
value of the ASCII control character, 1 to 37, for instance 2 is Control-B, B
is Control-K.
SET FILE-TYPE
Syntax: SET FILE-TYPE {APPLESOFT, INTEGER, TEXT, BINARY, OTHER hex-value}
This will inform Kermit-65 what type of file is being sent or received. It is
important that this is set correctly since Kermit-65 must create a file of the
appropriate type when receiving. With the advent of file attributes (if the
other kermit does them) this has been improved somewhat but since file at-
tributes usually only knows about text and binary one may endup with the wrong
type. So keep your type changing utility handy. When Kermit-65 is sending, it
will know the type of file but again be careful of file attributes (assuming
the other kermit does them) for the file may end up as binary on the other end.
The keywords for this parameter are listed below. OTHER includes an added
hex-value so that the user may specify the hex value of the file-type. This
has meaning only in PRODOS and allows the user to specify any of the many dif-
ferent file types used in PRODOS, see Tables 1-5 and 1-6 (thanks to Phil Chien,
M L Stier et al).
APPLESOFT The file being transferred is an Applesoft Basic program.
INTEGER The file being sent/received is an Integer Basic program.
TEXT The file being sent/received is an ASCII Text file.
BINARY The file being sent/received is a Binary image.
OTHER The type of file being sent/received is specified by the
hex-value.
SET FILE-WARNING
Syntax: SET FILE-WARNING {ON, OFF}
This tells Kermit-65 whether to warn the user about incoming filenames con-
flicting with existing files or not. If there is a conflict Kermit-65 will at-
tempt to change the file name to something unique.
1.5.15. The SET Command Page 14
-------------------------------------------------------------------------------
SET FLOW
Syntax: SET FLOW {OFF, XON, DELAY number}
SET FLOW allows one to use the XON/XOFF protocol when connected to a remote
site. Delay timings are part of this command. Using delay times is probably a
desperation move to keep the screen/printer from losing characters. Setting
the timings will have to be set by experience. Perhaps the best way to set the
timings is to bring the values down until you get failures and then double the
timing figure. Both LOG and SET PRINTER will probably depend on flow control.
OFF Turn off flow control
XON Turn on xon/xoff flow control with the remote
DELAY number Delay the micro until XOFF takes effect
Delay followed by a number (including 0) delays the program for that many mil-
liseconds after the XOFF is given to the remote. This delay allows the XOFF to
take effect before the program continues.
NOTE: Except for printing and logging, most Apples will not require you to use
a flow delay, even at rates up thru 19200 baud; for proper screen control,
however, certain older Apple IIe's may require a fairly high delay (120-160
dec), even at 300 baud.
SET KEYBOARD
Syntax: SET KEYBOARD {2P, 2E}
SET KEYBOARD tells Kermit-65 if the user has a full keyboard (2E) or not (2P).
If the user is on an Apple II+, this should be set to 2P (which is the
default). When set to that, character translations are available by using the
right-arrow key as a prefix character, as shown in Table 1-3.
SET LOCAL-ECHO
Syntax: SET LOCAL-ECHO {ON,OFF} [Default: OFF]
This command tells Kermit-65 to echo to the screen characters you type on the
keyboard (LOCAL-ECHO = ON), or to let the remote system echo the typed charac-
ters (LOCAL-ECHO = OFF). If, when CONNECTed to the remote, you see a duplicate
of every character you type, escape back to Kermit-65, and SET LOCAL-ECHO OFF.
If, when CONNECTed to the remote, you see nothing echoed to the screen, escape
back to Kermit-65, and SET LOCAL-ECHO ON.
SET PARITY
Syntax: SET PARITY {NONE, EVEN, ODD, MARK, SPACE} [Default: NONE]
This command tells Kermit-65 which parity you want to use while communicating
with the remote. Most remotes use NONE; some use EVEN, a few may use the other
possible values. If you have a choice of parity to use with a remote machine,
1.5.15. The SET Command Page 15
-------------------------------------------------------------------------------
if possible, choose NONE.
SET PREFIX
Syntax: SET PREFIX string [Default: boot volume]
or CD string
This command allows you to specify a ProDOS volume/file prefix.
SET PRINTER
Syntax: SET PRINTER {ON, SLOT} number
or SET PRINTER OFF
This allows one to turn the printer on for printing what is displayed on the
screen. The printer can also be toggled on/off via the ESCAPE character fol-
lowed by the command "P".
Remember when you use your printer there are a lot of variables here. What was
being sent to the screen now is being sent to your printer. If you were
emulating the VT52 your printer may not know how to handle the escape se-
quences, tabs, etc. It may be you can tell the host you are a tty or some such
device that will produce control codes that your printer can handle. Some
printers may require the flow control and delay to get readable printing.
ON Turn the printer on, slot number is required.
OFF Turn the printer off.
SLOT number Printer card is in slot "number".
SET PROTOCOL
Syntax: SET PROTOCOL {KERMIT, XMODEM}
SET PROTOCOL tells kermit-65 which protocol to use for file transfer. NOTE:
When XMODEM is used you will probably want to change the carriage return and
carriage return/line feed translation in the send/receive parameters. eg. "SET
SEND CR<->CR,LF OFF" and "SET RECEIVE CR<->CR,LF OFF".
SET RECEIVE
Syntax: SET RECEIVE {CR-CR,LR, EIGHT-BIT-QUOTE, END-OF-LINE, PACKET-LENGTH,
PAD-CHAR, PADDING, QUOTE-CHAR, START-OF-PACKET, TIMEOUT}
This will inform Kermit what to use to form and handle receive packets for file
transfer.
CR<->CR,LF {ON, OFF}
Terminate lines with cr or cr and lf.
EIGHT-BIT-QUOTE hexadecimal-number
1.5.15. The SET Command Page 16
-------------------------------------------------------------------------------
Char for eighth bit quoting.
END-OF-LINE hexadecimal-number
Char for line termination.
PACKET-LENGTH hexadecimal-number
Size of packet.
PAD-CHAR hexadecimal-number
Char for padding.
PADDING hexadecimal-number
Number of padding chs.
QUOTE-CHAR hexadecimal-number
Char for quoting.
START-OF-PACKET hexadecimal-number
Char for start of packet.
TIMEOUT hexadecimal-number
Number of seconds for timeout.
SET SEND
Syntax: SET SEND {CR-CR,LR, EIGHT-BIT-QUOTE, END-OF-LINE, PACKET-LENGTH,
PAD-CHAR, PADDING, QUOTE-CHAR, START-OF-PACKET, TIMEOUT}
This will inform Kermit what to use to form and handle send packets for file
transfer. The options are the same as the "SET RECEIVE ..." packets.
SET SLOT
Syntax: SET SLOT number
This option tells Kermit-65 in which slot the communication device is located.
The range for the number parameter is 1-7.
SET SWAP
Syntax: SET SWAP {ON, OFF}
This option tells Kermit-65 to swap the functions of the del and backspace
keys.
SET TIMER
Syntax: SET TIMER {ON, OFF}
SET TIMER will turn on or off the timeout checking for receive file transfers.
Since there is no clock for exact timing a loop of instructions has been set up
assuming a 1 megacycle CPU. CPUs which run faster may have to make allowances
1.5.15. The SET Command Page 17
-------------------------------------------------------------------------------
via the SET RECEIVE TIMEOUT command or the SET TIMING command.
SET TIMING
Syntax: SET TIMING { number }
Kermit uses a timing loop with the rom address $fca8 to produce a 1 ms. delay.
If you have a machine that runs faster than the 6502 chip you may have to in-
crease this number to get the 1 ms delay.
SET TERMINAL
Syntax: SET TERMINAL {MONITOR, NONE, VT100, VT52}
When TERMINAL is NONE, then all incoming characters (except nulls) are passed
directly to the display.
MONITOR emulation simply displays all the characters received from the remote
(except nulls) without any formatting of the screen (40 or 80 characters per
line). Control characters are displayed inverse.
VT100 Emulation
The Kermit-65 VT100 emulator is a small but working set of a true VT100 ter-
minal. It appears to work with most of the standard full screen editors and
processors on BSD UNIX and VAX/VMS machines. An Apple//e, //c, or //gs is
probably required with the Apple 80 column text card. The VT100 keypad has
also been defined for the application mode via the OA/CA/game button. Figure
1-1 shows the vt100 keypad on an apple keyboard with EDIT (VMS) usage, and
Figure 1-2 shows the layout on an Apple//gs keypad. When using EVE (VMS) the
meaning of the keys will of course change.
As you can see the keypad is physically laid out like the VT100 keypad except
for the lower right corner. Notice that above the keys are the VT100 labels
while in middle of the box (key) is the Apple key label. Also the arrow keys
work as VT100 arrow keys with the OA/CA/game button.
VT52 Emulation
SET TERMINAL VT52 will turn on the VT52 terminal emulation. One thing that is
required is your 80-column card must handle the $16 command in order for
reverse scrolling to work. The Apple//e 80 column card handles this fine. The
VT52 keypad has been defined using the open/closed Apple. For II or II+ one
will have to have a game paddle or joy stick (key shift mod too????) and use
the buttons. When a button/open/closed Apple is pushed then the keys starting
with 6,7,8 & 9 form the top of the keypad. Key 6 is the blue key key 7 is the
red key etc. The keys directly below the 6,7,8 & 9 and shifted one-half key to
the right form the second row of the keypad etc. Every thing is fine until you
get to the last row on the keypad. There the sp bar is 0 and the other two keys
are moved to the upper right as the 0 & - keys. This way the arrow keys are
available as VT52 keys with the OA/CA/game button combination (thanks to Dick
Atlee for this idea). With those two exceptions the keypad is physically
1.5.15. The SET Command Page 18
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
PF1 PF2 PF3 PF4 .(period)
------- ------- ------- ------- -------
| | |findnxt|delline|select |
| 6 | 7 | 8 | 9 | 0 |
| gold | help | find |undelln| reset |
------- ------- ------- ------- -------
7 8 9 -
------- ------- ------- -------
| page |section|append |delword|
| Y | U | I | O |
|command| fill |replace|undelwd|
------- ------- ------- -------
vt100 key ----> 4 5 6 ,
------- ------- ------- -------
vms edit usage ----> |advanc|backup | cut |delchar|
apple key ----> | H | J | K | L |
vms edit usage ----> |bottom| top | paste |undelch|
------- ------- ------- -------
1 2 3 ENTER
------- ------- ------- -------
| word | eol | char | enter |
| N | M | , | . |
|chgcase|deleol |specins| sub |
------- ------- ------- -------
0
---------------------------------------
bline |
space bar |
openline |
---------------------------------------
Figure 1-1: VT100 Keypad on an Apple Keyboard
-------------------------------------------------------------------------------
similar to a VT52 keypad. Remember the open/closed Apple or the game button
must be pushed (like the control key) to get the keypad emulation. Figure 1-3
should clear up the questions.
1.5.16. the SHOW command
Syntax: SHOW [option]
The SHOW command displays various information:
ALL All parameter settings (this is quite long).
BAUD Baud rate of the com card.
APPLICATION-MODE Keypad in application mode?
CLEAR-SCREEN Clear screen on return from connect?
1.5.16. the SHOW command Page 19
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
PF1 PF2 PF3 PF4
------- ------- ------- -------
| | |findnxt|delline|
| CLEAR | = | / | * |
| gold | help | find |undelln|
------- ------- ------- -------
7 8 9 -
------- ------- ------- -------
| page |section|append |delword|
| 7 | 8 | 9 | + |
|command| fill |replace|undelwd|
------- ------- ------- -------
vt100 key ----> 4 5 6 ,
------- ------- ------- -------
vms edit usage ->| advanc|backup | cut |delchar|
gs key -------> | 4 | 5 | 6 | - |
vms edit usage ->| bottom| top | paste |undelch|
------- ------- ------- -------
1 2 3 ENTER
------- ------- ------- -------
| word | eol | char | |
| 1 | 2 | 3 | |
|chgcase|deleol |specins| |
------- ------- -------| enter |
0 . | ENTER |
-----------------------| sub |
| bline |select | |
| 0 | . | |
| openline | reset | |
-------------------------------
Figure 1-2: VT100 Keypad on an Apple//gs
-------------------------------------------------------------------------------
CURSOR-KEYS-VT100 Are the cursor keys emulating the VT100 cursor
keys?
DEBUGGING Debugging mode.
DEFAULT-DISK Which Diskette drive is used for file transfer?
DEVICE-DRIVER Which communication device is being used?
DISPLAY Which screen display is being used?
ESCAPE Character for terminal connection.
FILE-TYPE Of Apple DOS/PRODOS file being sent/received.
FILE-WARNING Warn users if incoming file exists?
FLOW Should XON/XOFF flow control be used to the remote?
1.5.16. the SHOW command Page 20
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
^ is up arrow BLUE RED GRAY ^ .(period) ENTER
------- ------- ------- ------- ------- -------
| | |delline| up |select | enter |
| 6 | 7 | 8 | 9 | 0 | - |
| gold | help |undelln|replace| reset | sub |
------- ------- ------- ------- ------- -------
v is down arrow 7 8 9 v
------- ------- ------- -------
| page |findnxt|delword| down |
| Y | U | I | O |
|command| find |undelwd|section|
------- ------- ------- -------
vt52 key ----> 4 5 6 ->
------- ------- ------- -------
vms edit usage ----> |advanc|backup |delchar| right |
apple key ----> | H | J | K | L |
vms edit usage ----> |bottom| top |undelch|specins|
------- ------- ------- -------
1 2 3 <-
------- ------- ------- -------
| word | eol | cut | left |
| N | M | , | . |
|chgcase|deleol | paste |append |
------- ------- ------- -------
0
---------------------------------------
bline |
space bar |
openline |
---------------------------------------
Figure 1-3: VT52 Keypad on an Apple Keyboard
-------------------------------------------------------------------------------
KEYBOARD II+ or //e keyboard.
LOCAL-ECHO Full or half duplex switch.
LOG Are we logging connect data?
PARITY Character parity to use
PREFIX Which default prefix to use with PRODOS? Alias PWD.
PRINTER Should the printer be used for the display?
PROTOCOL Which protocol is to be used for file transfer.
RECEIVE Various parameters for receiving files
SEND Various parameters for sending files
1.5.16. the SHOW command Page 21
-------------------------------------------------------------------------------
SLOT Which slot # is communication device in?
SWAP Swap the del and backspace keys?
TIMER Is the receive timeout on or off?
TIMING Count for timing loop
TERMINAL Which terminal (if any) should Kermit emulate?
VOLUMES Show the online volumes.
The above options are analogous to the equivalent SET commands.
1.5.17. The STATUS Command
Syntax: STATUS
Give statistics about the most recent file transfer. This includes information
such as number of characters sent/received, number of data characters
sent/received, and last error encountered.
1.5.18. The TAKE Command
Syntax: TAKE filespec
The TAKE commands tells kermit-65 to execute commands from the specified file
similarly to the KERMIT.INIT file. See discussion on KERMIT.INIT above for
details.
1.5.19. The TYPE Command
Syntax: TYPE filespec
The TYPE commands tells kermit-65 to print to the screen from the specified
file. Text files only and works best with 80 characters per line or less.
1.5.20. The UNLOCK Command
Syntax: UNLOCK filespec
UNLOCK will unlock the given filespec on the default drive.
1.6. Installation
1.6.1. Standard Installation Page 22
-------------------------------------------------------------------------------
1.6.1. Standard Installation
To bootstrap Kermit to prodos, get the file APPPRO.BNS on a apple diskette.
Use binscii to convert this file into a shrinkit file. Use shrinkit to extract
the files onto a prodos diskette with your own prodos and basic.system files.
Then "-read.me" for further instructions. Thanks to Les Ferch for this install
system & thanks to Bird for his "birds better bye" in the menu.system. For dos
3.3 get the files APP387.[1-2] on a master diskette then read the first of
app387.1 for further instructions. Thanks to Alan Kalker for this install sys-
tem.
The kermit binaries will run on either system. Simply use the PRODOS conver-
sion routines (if they have them fixed, better to use copy II+ or whatever) to
move kermit, kermit.help and kermit.init files. If you want other options as a
regular thing then you can change file kermit.init with your favorite editor.
Files Supplied for Kermit-65
The following files should be supplied on the columbia distribution tape:
APP387.1 Install system for dos 3.3 (1 of 2)
APP387.2 Install system for dos 3.3 (2 of 2)
APPAAA.HLP List of files (like this one)
APPAAA.NEW Whats new in this release
APPACC.HEX Apple com card hex
APPACC.M65 Apple com card source
APPACE.HEX Ace dual card hex
APPACE.M65 Ace dual card source
APPBEL.BNS Apple gs alternate bell
APPCAT.HEX Apple cat hex
APPCAT.M65 Apple cat source
APPCCS.HEX CCS 7710 com card hex
APPCCS.M65 CCS 7710 com card source
APPCPS.HEX CPS com card hex
APPCPS.M65 CPS com card source
APPGS.HEX GS serial port hex
APPGS.M65 GS serial port source
APPHMM.HEX Hayes micro modem card hex
APPHMM.M65 Hayes micro modem card source
APPICON.BNS Kermit icon for gs users
APPLE.DOC Complete documentation (it says here)
APPLE.MSS Scribe text formatter source for documentation
APPLE.PS Documentation ready for a postscript printer
APPMAI.HEX Main kermit pgm hex
APPMAI.M65 Main kermit pgm source
APPMAK.UNX Make file for UNIX cross assembly (to assemble Kermit)
APPMSV.HEX Microtec com card hex
APPMSV.M65 Microtec com card source
APPPRO.BNS Install system for prodos
APPSSC.HEX Super serial com card hex
APPSSC.M65 Super serial com card source
APPXAS.1 65c02 cross assembler for UNIX system part 1
APPXAS.2 65c02 cross assembler for UNIX system part 2
APPXAS.3 65c02 cross assembler for UNIX system part 3
1.6.1. Standard Installation Page 23
-------------------------------------------------------------------------------
The syntax of the filenames may vary. On UNIX systems, the filenames will be
in lowercase. On VM/CMS systems, the period will be replaced by a space. All
files are text, however the suffix of BNS are binsciied binary files.
1.6.2. Alternate Installation
The main problem exists in getting the hex files onto your diskette as a text
file. But again that is a test of your creativity. If you have a version of
Kermit running then GET or RECEIVE the file as a text file and you are in busi-
ness. Since Kermit has been separated into two assemblies then two hex files
will have to be present on the diskette. Get the main hex file APPMAI.HEX and
select which com card hex you will need. First "exec APPMAI.HEX". Your Apple
(or compatible) will go into monitor and show you *'s for several minutes.
This is the monitor loading the hex into binary. If you get beeps from the
monitor its probably because you didn't get a good copy of the text file. Now
EXEC the com card driver you are going to use. You will have to get back into
basic(aha another test for you, try "3d0G") to do this. And you will see the
monitor loading the com driver. The order of EXEC's is important. The com card
should be loaded last. Next get back into basic and do a "bsave
kermit,A$1000,L$7000". You may have to specify the drive to do this binary
save, with a slot or drive on the end of the BSAVE (aha another test). You now
run Kermit via "brun kermit".
If you want to customize Kermit for your needs, the recommended method is to
use file "kermit.init" OR do all your SETs, etc, and then do an "exit". Now
you should be back in BASIC. At this point do a "bsave name,A$1000,L$7000" and
when you do a "brun name" all your setups will be remembered. NOTE: If you
save your current settings via "bsave kermit ..." you may find that moving that
binary to another type of Apple (e.g. from a //e to an //e+) will not be pos-
sible. So make sure you keep the original binary to move between machine
types.
Since the org is now $1000 if you have been using Kermit and then went back to
basic for some trivial thing a "CALL 4096" should start up Kermit without
having to reload it.
In summary:
1. EXEC APPMAI.HEX
2. Choose the com card driver you will use. For example APPSSC.HEX.
3. 3D0G
4. EXEC APPSSC.HEX
5. BSAVE kermit,A$1000,L$7000
And you should be in business. Remember there is the command HELP and whenever
you are into a command a "?" will give you the possible options available at
that point of a command. The escape key will finish typing an option if it is
possible. The syntax of all the commands and options only requires enough
characters to make that command or option unique.
1.7. Problems Page 24
-------------------------------------------------------------------------------
1.7. Problems
Installation
NOTE: When using the super serial driver you must have the cards sw6-2 on.
This allows the card to use interrupts. The rest of the switches are set from
within Kermit. It appears that you can run your Apple 2 with sw6-2 on and in
99% of the cases will cause no problems. This is because the OS runs with in-
terrupts locked out ("sei" in assembly language) and the program must ex-
plicitly give a "cli" for interrupts to work (the super serial driver does).
The AE Serial Pro must have switches 1 & 3 open and 2 & 4 closed. This appears
to disagree with the documentation since those settings turn off irq interrupts
and turn on nmi interrupts. So watch this it may get corrected in later ver-
sions.
The Microtek driver is a super serial look alike which does not run with inter-
rupts. If you have trouble with the super serial driver you might try the MSV
driver. For you people with the MSV-622c card, you might try running a jumper
from the UART 6551 pin 26 to the card edge pin 30. This will enable interrupts
just like the SSC sw2-6, and then you can use the super serial driver.
The Prometheus card will work with the Apple com driver. However you will have
to set the switches on the card for baud etc. Evidently this card can not be
programmed by the software. If that is not true then here is an opportunity for
you to write a better driver. If you do please pass it on for other Prometheus
users.
The apple cat uses the modem's firmware for dialing. Type ";" for a 2 second
delay, or any control character to abort the dialing. ROM is not needed if ex-
ternal phone is used for dialing. Supports 110-600 baud, and 45.5 baud (use
kermit-65's 135 baud setting). Supports 1200 baud with apple-cat 212 card, in
slot-saver configuration. Allows use of external serial port by typing "X" as
dialing string. Thanks to Dick Wotiz for this driver. Reports have it that
the Apple Cat will also work with the Apple com driver.
Some have noted the Apple com card must be initialized via the "IN#x" before
starting Kermit. Ike has now updated this driver and the initialization is now
done within the Apple com driver. Thanks Ike.
Usage
There is the command HELP and whenever you are into a command a "?" will give
you the possible options available at that point of a command. The escape key
will finish typing an option if it is possible. The syntax of all the commands
and options only requires enough characters to make that command or option
unique.
When using flow control you may appear to hang. Type a ^Q (Control-Q) and that
may free you up.
Remember when you use your printer there are a lot of variables here. What was
being sent to the screen now is being sent to your printer. If you were
emulating the VT52 your printer may not know how to handle the escape se-
1.7. Problems Page 25
-------------------------------------------------------------------------------
quences, tabs etc. It may be you can tell the host you are a tty or some such
device that will give carriage returns etc that your printer can handle. Some
printers may require the flow control and delay to get readable printing.
File Transfer Errors
"File Transfer Errors," was added to this document by the Southeast Regional
Data Center (SERDAC), '88 July 17.
In spite of the fact that successful Kermit file transfers are almost always
error free, there are a number of circumstances which can corrupt, prevent, or
interrupt/abort a transfer. In the case of an actual abort, there may be data
loss or corruption, and an incomplete file may not have a correct end-of-file.
These circumstances may be roughly divided into two groups: (1) problems due to
file or disk errors, and (2) problems due to delays or failures in Kermit
packet exchange.
Common problems in category (1) include the following:
(a) improper file specification (b) wrong file type (c) protected file(s) (d)
disk problems
(1a) problems can occur when you specify, to either the Apple or host Kermit, a
non-existent or improperly located file. Misspelling and/or incorrect
(sub)directory specification are popular villains! If you are commanding ei-
ther Kermit to SEND a file (SEND filespec), the problem will be fairly obvious.
On the Apple II, you'll see an error message like: "FILE NOT FOUND." On the
VAX/VMS 8800, for example, you'll see the message: "%KERMIT32 ....., file not
found for 'filespec'". In either case, the transfer will not take place. If
you're using Kermit-65 to GET (GET filespec) files from the VAX/VMS Kermit
server, and the requested file does not exist in your VAX default directory,
you should see a Kermit-32 generated "REMOTE MESSAGE %KERMIT32 ....., file not
found for 'filespec'" appear in the transmission status display, and then the
Kermit-65 message "CANNOT RECEIVE FILE-HEAD". Transfer of the questionable
file will not take place.
(1b) problems can occur if you forget to specify, to either the Apple or host
Kermit, what type of file you wish to transfer. If you are using Kermit-65 to
send files to a host, you are fairly well protected against this error. If you
attempt to send a file whose CATALOG type does not match the FILE-TYPE
parameter setting, you will receive a "INCOMPATIBLE FILE FORMAT" error message,
or something similar, and the transfer will not take place. If, however, you
are receiving (via RECEIVE or GET) a file whose native type does not match the
FILE-TYPE setting, the file WILL be received. It will be mis-typed (according
to the FILE-TYPE setting), though, and any later attempt to use it on the Apple
will probably be unsuccessful.
The same sort of circumstances generally apply for a host Kermit. With the VAX
8800, for example, when Kermit-32 is sending a file, you generally need not
worry about setting its file type. When Kermit-32 is receiving a file,
however, properly setting its file type is very critical. If you wish to put
Kermit-32 in server mode to receive multiple files, set the file type BEFORE
using the SERVER command, and make sure that you only send it the appropriate
type of files during that server session. You cannot switch file types DURING
a given server session!
1.7. Problems Page 26
-------------------------------------------------------------------------------
NOTE: One other way you can get into trouble with "wrong file type" is by try-
ing to send a file which is mixed-- mostly text, but with some embedded charac-
ters that are not true 7-bit ASCII (i.e., ASCII codes 00-127). This often hap-
pens when you are trying to transfer a file which is word processor output.
Most word processing software claims to allow you to output a true ASCII or
text file, but in some cases it really does not, and in others the choice of
output options is confusing. If you have set up either Kermit program to
send/receive a text file, and you try to transfer illegal ASCII characters
(codes 128-256), your transfer may "hang" or be aborted. At the very best, if
the transfer "works," the suspect characters will later probably be meaningless
or confusing to the destination machine.
(1c) problems can occur in two ways on the Apple II. If your default drive
disk is write protected, and you attempt to receive a file, you will receive a
"WRITE PROTECTED" error message, and no transfer will take place. If you have
set Kermit-65's FILE-WARNING parameter to OFF (normally NOT a good idea), and
you attempt to receive a file that already exists in a locked state on your
default diskette, you will receive a "FILE LOCKED" error message (if the file
is very short, you may have to check with a Kermit-65 STATUS command to see the
error message), and no transfer will take place.
Similar problems may occur on the host because of various file protection
schemes. On the VAX/VMS 8800, for example, Kermit-32 cannot send out a file
that you are unauthorized to read. And, it cannot receive a file unless you
are authorized to write to that filename and its (sub)directory. If you use
Kermit-32 to attempt to SEND (SEND filespec) a protected file, you should see a
"%KERMIT32 ....., insufficient privilege or file protection violation for
'filespec'" error message, and no transfer will take place. If you have
Kermit-32 in server mode, and you are trying to GET a protected file from it,
or you are trying to SEND it a file whose space is protected, you should see a
similar Kermit-32 generated REMOTE MESSAGE appear in the transmission status
display, and then, on GET, the Kermit-65 message "CANNOT RECEIVE FILE-HEAD".
Transfer of the protected file will not take place.
(1d) problems are most likely to occur because of Apple II diskette or drive
problems. The following conditions will generate "DISK I/O" or "I/O ERROR"
messages when Kermit-65 transfer commands are entered: bad diskette in default
drive, no diskette in default drive, default drive door open, and/or unINITial-
ized disk in default drive.
If any of those errors are detected before the attempted transmission of a
given file, the transfer of that file will not begin. If any are detected
DURING a file transmission, the file transfer will likely abort; at best trans-
mitted data will be incomplete. Data which does reach the destination end of an
aborted transfer should be considered very suspect; the disk problem should be
corrected and the transfer should be repeated! (The best chance you have for
salvaging text file data in an abort is if the file destination is the host
machine and you have told its Kermit to save incomplete files, e.g., on the
VAX-8800, you need to SET INCOMPLETE KEEP).
One other Apple II disk problem can be encountered while you are using
Kermit-65 to receive files. If you exceed the storage capacity of your diskette
during a RECEIVE or a GET, you should see a "DISK FULL" error message. Data
that has been received up to the point of the overflow will be automatically
DELETEd. Make CERTAIN that you do not try to receive any more files until you
have DELETEd some files from the problem diskette, or until you have replaced
1.7. Problems Page 27
-------------------------------------------------------------------------------
it with one that has adequate capacity to receive the complete file. NOTE: See
Section 1.5.4.
It is less likely that (1d) problems would occur because of host machine disk
problems. The most likely circumstance you might encounter on the VAX/VMS
8800, for example, would be in receiving a large file and, in the process, ex-
ceeding your VAX disk quota. In such a case, you should see an appropriate
Kermit-32 generated REMOTE MESSAGE appear within the Kermit-65 transmission
status display. If this happens, delete some files from your VAX
(sub)directories, and/or have your VAX disk quota increased BEFORE you try the
transfer again. If you have issued a SET INCOMPLETE KEEP command to Kermit-32,
there may be some chance of salvaging text file data that arrived before the
disk quota overage, but the best thing you can do is to repeat the transfer!
As a general rule, if some disk or file error prevents a transfer from begin-
ning, to get it to "go," you will need to correct the error and repeat all the
steps that preceded it.
If you are still commanding the host Kermit, and you see an error message, you
will have to get the host Kermit's prompt back and give it an acceptable com-
mand. If you have commanded the host Kermit to SEND or RECEIVE, and are back
commanding Kermit-65 when you notice the error, you will have to correct the
problem, CONNECT back to the host, get the host Kermit prompt (with the VAX/VMS
8800, try typing RETURN or CTRL-Y), and repeat the SEND or RECEIVE command, be-
fore returning back to Kermit-65 to command it again.
If you have placed the host Kermit in server mode, and are giving Kermit-65
commands when you notice an Apple disk/file error prevents a file transfer from
starting, chances are good that you won't have to CONNECT back to the host. It
is also important to note that within a single server session, when you are
transferring multiple files, all files transferred PRECEDING an error (or
abort) are probably good. To repeat the transfer, correct the error, and give
Kermit-65 the appropriate command to transfer the file that messed up. The
first time you do it, you may get back a message like "REMOTE MESSAGE
%KERMIT-32..... protocol error" This is just the host server trying to get back
"on track" after the error. When the Kermit-65> prompt returns, enter the
transfer command again, and it will probably be accepted.
If the second attempt should fail, wait for the Kermit-65> prompt, enter:
FINISH, wait for the prompt again, and enter: CONNECT. If you do not see the
host operating system prompt ($ on the VAX 8800), type a few RETURNs (or on the
VAX/VMS a CTRL-Y). Re-invoke the host Kermit and put it back in server mode.
If disk or file errors prevent a transfer from completing, recovery will depend
on the error, whether you had the host Kermit in server mode or not, and on
your desire for accuracy.
Some disk/file error aborts are "fatal" (e.g., Apple DISK FULL, and uploading
to the VAX 8800 w/o having commanded Kermit-32 to SET INCOMPLETE KEEP). The
destination file will be destroyed. The transfer of the file will have to be
repeated again from the beginning. Again, unless you have set the host Kermit
for server mode, you will have to CONNECT back, get the host Kermit prompt, and
re-command it. If you were in a server session, though, you can probably
repeat the transfer of the interrupted file without going back to the host (see
recovery procedures above).
Other disk/file errors that interrupt/abort a transfer may leave salvageable
1.7. Problems Page 28
-------------------------------------------------------------------------------
text data at the transfer destination. The best policy, though, is to repeat
the transfer of the incomplete file (see recovery procedures above).
Common problems in category (2) include the following:
(a) bad parity
(b) noisy communications line
(c) timeout due to delays, "disaster," etc.
(d) Kermit-program incompatibility
(e) user error
(2a)
Parity settings are very critical to correct transfers. If you do not inform
Kermit-65 of the correct parity being used by the remote host machine or the
communications path to it, "checksum" error checking calculations will be
wrong, and packets will be consistently rejected when they arrive at their des-
tination. In particular, most binary file Kermit transfers won't get very far
if parity is not set correctly.
[NOTE: If you want to do a binary file transfer (Apple binary or BASIC files)
via a FIRN Network connection to the SERDAC VAX/VMS 8800, you must SET PARITY
SPACE before the transfer is initiated; that will insure that eight-bit quoting
is used. If you dial directly into the VAX/VMS 8800, SET PARITY NONE;
eight-bit quoting (which is less efficient) is not required].
(2b)
Line noise can be the root cause for a variety of file transfer problems. The
beauty of a "packetized protocol transfer" scheme like Kermit is that or-
dinarily, the scheme will overcome an occasional burst of line noise. A packet
which arrives out of sequence, or which does not have the same checksum "bit
count" as when it was sent, will get retransmitted, and the noise induced data
error will correct itself.
Sometimes, however, bad line noise can outwit even the cleverest aspects of
Kermit. There are some times where severe noise can corrupt the "checksum" er-
ror checking and lead to undetected transmission of a bad character (assuming
that the severe line noise exists, chances of this happening for one character
are, for Kermit-65 error checking, less than two percent).
If line noise is bad enough and persistent enough, it is also a cause for
several problems that will eventually "hang" or totally confuse and abort a
transfer:
Each transfer is preceded by the Kermit-to-Kermit exchange of several short
"initialization packets. These tell the controlling programs critical things
to expect about the upcoming transfer. If line noise prevents the packets from
arriving, or scrambles them up, the transfer probably can't get started cor-
rectly.
One of the biggest vulnerabilities of the Kermit scheme is that each arriving
1.7. Problems Page 29
-------------------------------------------------------------------------------
packet must be acknowledged (ACK) by the receiver, and that the sender must ac-
tually receive back the acknowledgement (likewise, if an expected packet does
not arrive, there often must be a negative acknowledgement (NAK)). Since the
ACK/NAK packets are very short, they are rather vulnerable to severe noise. If
too many of them are scrambled or lost, the transfer can get out of synch, and
the transferring programs can lose track of where they are.
One other place Kermit is vulnerable is in the beginning of a data packet. The
first several bytes of these longer packets are reserved for control infor-
mation: packet type, byte count, sequence number, etc. If line noise
repeatedly coincides with the transmission of this control information, it is
very easy for the transfer to get confused-- particularly if the packet number-
ing gets garbled.
If you detect frequent line noise after you've connected to a host, but before
you begin transfers (you will probably see extraneous junk characters appearing
on your screen), you're probably in for trouble. Once transfers actually begin,
line noise problems are often characterized by incrementing of the RETRY
counter on the Kermit-65 transmission status display, and/or by long pauses in
incrementing of the status display byte counter.
To minimize line noise, first see if there are any obvious loose connections in
your equipment (telephone line connection to wall box, telephone line to modem,
modem cabling to serial connector, or, if appropriate, cabling from hardwire
port to serial connector). If not, you may want to hang up and redial to get
another telephone connection (almost every connection is unique, and you may
get a better one than you had). Many line noise problems will clear up with
those simple remedies, but some may be beyond your control!
If all else fails, you may also try shortening the maximum length of your data
packets (SET SEND/RECEIVE PACKET-LENGTH) to possibly lessen the effects of per-
sistent noise.
(2c)
A Kermit transfer consists of a regular and predictable exchange of initializa-
tion, data, and, ACK/NAK packets. If something (line noise, busy computer,
user error, etc.) interrupts or delays this regular exchange, there must be a
way for a Kermit program on at least one end to figure out something is wrong
and try to get the packet exchange back on track again.
This is usually done with a timer and retry mechanism. If a Kermit does not
receive an expected packet, within its timer's time limit (a timeout), it will
resend its last sent packet to try to "wake up" the other Kermit (effectively
by asking it to send its last packet again). This resending is repeated
("retried") a number of times before the program assumes it cannot get things
on track again. Each packet resent by Kermit-65 is counted as a RETRY on its
transmission status display. If Kermit-65's retry count exceeds 20, it will try
to issue an error message according to what kind of packet it was waiting for
and/or it will say MAX RETRY COUNT EXCEEDED. The transfer will then be aborted.
Very frequently, timeouts are caused by unexpected delays in the remote com-
puter, or in the network thru which you connect to it. If you know that the
host machine or network is very busy, and you repeatedly have aborted transfers
due to timeouts, you may be able to alleviate the problem by increasing the
value of the default Kermit-65 receive timeout parameter (SET RECEIVE TIMEOUT).
1.7. Problems Page 30
-------------------------------------------------------------------------------
Other common ways that Kermit-65 can timeout and abort are: (1) if the host
machine "goes down" during a transfer, (2) if the telephone, network, or
hardwire connection is completely broken during a transfer, (3) if you forgot
to "start up" the host Kermit and give it a transfer command (SEND, RECEIVE, or
SERVER) BEFORE giving Kermit-65 a transfer command, and (4) if (2a), (2b),
(2d), or (2e) problems occur and critical initialization packets are never
received.
In cases (1) and (2), you will eventually probably see a CANNOT RECEIVE DATA or
MAX RETRY COUNT EXCEEDED message from Kermit-65. Cases (3) and (4) may result
in a CANNOT RECEIVE INIT message.
(2d)
To do effective Kermit transfers, there must be two Kermit programs working--
one on either end of a "computer connection." In addition, the two Kermits
must be able to "talk to" each other in a prescribed, standard way. Although
there are specific standards for writing all Kermit programs, most of them have
been written by volunteers and are in the "public domain." The protocol re-
quirements and resultant programs are generally rather complex, and it is all
too easy to inadvertently program in a subtle error in a given Kermit version.
Additionally, there are many "levels of ability" of Kermit programs: some can
operate in server mode, some cannot. Some can transfer binary files; some can-
not, etc. Unless the Kermit programs you are using are both error free, and
both have the same capabilities for the transfers you wish to perform, you are
in trouble!
If there is a systematic "bug" in one of the Kermit programs, or if you are as-
king one Kermit to do something the other can't do, there will usually be a
problem with packet exchange; in many cases the requested transfer will not
even get started. You may see a Kermit-65 error message, on the transmission
status display, saying that a packet was not received, or a REMOTE MESSAGE say-
ing a packet was unexpectedly received, or one that the command cannot be ex-
ecuted by the other Kermit. In some cases, you may see no explanatory error
messages at all; the transfer will just "hang" and will probably eventually
"timeout" and abort (MAX RETRY COUNT EXCEEDED).
(2e)
If you've read about category (1) errors above, you can see that there are a
variety of things you can do to with files or disks to mess up a Kermit trans-
fer. You can also wreak havoc by issuing improper or illegal commands to Ker-
mit programs. Before trying to transfer a lot of files, or trying out a new
type of transfer, be sure you understand the procedure you need to follow and
the various Kermit commands that will be involved.
New Kermit users often try to command their local Kermit program (e.g.,
Kermit-65) to send or receive a file, without having first invoked and com-
manded the host Kermit.
Another common error is to issue improper commands to a remote server. For ex-
ample, when VAX/VMS Kermit-32 is in server mode, and you are requesting files
from it via Kermit-65 commands, you cannot use a RECEIVE command; you must in-
stead use GET.
As with Kermit program incompatibilities, illegal or inappropriate commands
1.7. Problems Page 31
-------------------------------------------------------------------------------
will often cause a problem with packet exchange; in many cases the requested
transfer or action will not even get started. You may see a Kermit-65 error
message, on the transmission status display, saying a packet was not received,
a REMOTE MESSAGE that a packet was unexpectedly received, or one that the com-
mand cannot be executed by the other Kermit. In some cases, you may see no ex-
planatory error messages at all; the transfer will just "hang" and will prob-
ably eventually "timeout" and abort (MAX RETRY COUNT EXCEEDED).
Except for the fact that you will probably never note a category (2) "packet
exchange" error while you are "talking to" the remote system or commanding its
Kermit, and that the remedies you must employ to correct the errors will be
different, recovery procedures to get your file transferred correctly will be
much the same as those we described at the end of the discussion on category
(1) "disk/file" errors. Make sure to read that discussion for more details
than we have included below.
In short, if an error prevents a given transfer from actually beginning, you
will need to correct the error and repeat all the steps that preceded it. This
will be more difficult if you are transferring only one file-- having commanded
the remote Kermit to SEND or RECEIVE. If you have placed the remote Kermit in
server mode, and an error prevents the transfer of one file, all files trans-
ferred up to that point are probably OK, and you can usually correct the
problem, and get a transfer started again without having to reCONNECT back to
the host.
If you are transferring a text file, and an abort occurs in mid-transfer, some
data may be salvageable in the destination file, but the best rule with any
type of file is to repeat the transfer, in which case the recovery procedures
in the last paragraph apply.
1.8. Customizing Kermit-65
The source code to Kermit-65 is in 6502 Assembler. It has been formatted for a
cross assembler which runs on a unix 2's complement machine. Files appxas.1
thru appxas.3 are the cross assembler for UNIX. Get the files on a UNIX system
and then look at the documentation at the start. They will easily make you a
xasm for Kermit. The file appmak.unx is the makefile to use with the xasm to
reassemble all of Kermit's parts.
Kermit-65 has been separated into two assemblies, the main routines and the com
card routines for the devices shown in Table 1-1. A vector has been set up in
low memory for the two assemblies to communicate. Look at the working com
drivers for tips on how to incorporate your version of the com driver. some
things to note: It is probably best to buffer the input from the remote and to
get input characters from the remote every chance you get. Note the Microtek
SV-622 driver, whenever the input is checked for a character and has a charac-
ter the character is put into the buffer immediately. Also when the output is
checked for ready to output, if the card is not ready to output then it is
checked for a character to input. All this should help prevent losing charac-
ters.
All the routines should return with the "rts" instruction. Routines which can
return a true/false indication should return with the P reg zero flag set ap-
propriately. That is: a "beq" instruction will branch on a false indication
and the "bne" will branch on a true indication. The com driver should start
Apple II Kermit Page 32
-------------------------------------------------------------------------------
its routines above the main routines and tell where the end of the com driver
is via location $100c. If your com driver gets too large then the bsave ad-
dress would have to be changed when you are saving the binary to diskette.
Apple II Kermit Page 33
-------------------------------------------------------------------------------
address size module function
1003 byte main This is the baud rate index as follows:
3 - 110
4 - 135.4
5 - 150
6 - 300
7 - 600
8 - 1200
9 - 1800
10 - 2400
11 - 3600
12 - 4800
13 - 7200
14 - 9600
15 - 19200
eg:if index is 6 then line should be 300 baud
1004 byte unused
1005 word driver Address of a null terminated string.
address should point to a capitalized
string of the drivers id
1007 byte main Com slot in the form $n0 where n is slot #.
1008 byte main Force initialization flag when 0.
init routine should always initialize when
this flag is 0 & then set flag non-zero.
1009 word main Address of the end of Kermit main routine.
100b byte main Flow control is on when high bit is set.
100c word driver Address of the end of the com driver.
100e byte driver Time constant-used with the 1040 rtn.
100f word driver Address of the end of screen save memory(//e).
1011 byte driver Screen saved flag.
1020 3 bytes driver Jump to initialization routine.
1023 3 bytes driver Jump to command routine. A reg has command
0 - hang up the line
$0b - set baud rate
$0c - set break on the line
$91 - do xon on the line
$93 - do xoff on the line
routine returns false (P reg zero flag) if unable
1026 3 bytes driver Jump to check for input from the line.
routine returns false (P reg zero flag)
if no character on line
1029 3 bytes driver Jump to get input character from line.
routine returns character in A reg
102c 3 bytes driver Jump to put character in A reg on line.
102f 3 bytes driver Jump to reset com driver.
1040 3 bytes main Jump to Apple ROM wait rtn. microsecs delay
=1/2(26+27A+5A*A) where A is the accumulator
1043 3 bytes main Jump to routine to print null-terminated string.
X reg contains least significant byte of address
Y reg contains most significant byte of address
routine does not issue a carriage return.
1046 3 bytes main Jump to routine to read the keyboard.
A reg contains the character read
1049 3 bytes main Jump to routine to print carriage rtn & line feed.
104f 3 bytes main Jump to routine to set characters parity.
A reg contains the character before and after.
Table 1-4: Communications card vector area
Apple II Kermit Page 34
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
List of most of the prodos file types.
Num Name OS Definition
$00 typeless
$01 BAD both BAD blocks file
$02 PCD SOS Pascal CoDe file
$03 PTX SOS Pascal TeXt file
$04 TXT both ASCII text file
$05 PDA SOS Pascal DAta file
$06 BIN both BINary file
$07 CHR SOS CHaRacter font file
$08 PIC both PICture file
$09 BA3 SOS Business BASIC (SOS) program file
$0A DA3 SOS Business BASIC (SOS) data file
$0B WPD SOS Word Processor Document
$0C SOS SOS system file
$0D SOS SOS reserved file type
$0E SOS SOS reserved file type
$0F DIR Both subDIRectory file
$10 RPD SOS RPS data file
$11 RPI SOS RPS index file
$12 SOS Applefile diskcard file
$13 SOS Applefile model file
$14 SOS Applefile report format file
$15 SOS Screen library file
$16 SOS SOS reserved file type
$17 SOS SOS reserved file type
$18 SOS SOS reserved file type
$19 ADB ProDOS AppleWorks Database file
$1A AWP ProDOS AppleWorks WordProcessing file
$1B ASP ProDOS AppleWorks Spreadsheet file
$1C-$5F Reserved
$60-$6F ProDOS PC Transporter (Applied Engineering)
$60 PRE ProDOS ProDOS preboot driver
$61-$6A ProDOS Reserved
$6B NIO ProDOS PC Transporter BIOS and drivers
$6C ProDOS Reserved
$6D DVR ProDOS PC Transporter device drivers
$6E ProDOS Reserved
$6F HDV ProDOS MSDOS HardDisk Volume
$70-$9F Reserved
$A0 WPF ProDOS WordPerfect document file
$A1 MAC ProDOS Macrofile
$A2 HLP ProDOS Help File
$A3 DAT ProDOS Data File
$A4 Reserved
$A5 LEX ProDOS Spelling dictionary
$A6-$AB Reserved
Table 1-5: PRODOS file types, part 1
-------------------------------------------------------------------------------
Apple II Kermit Page 35
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Num Name OS Definition
$AC ARC ProDOS General Purpose Archive file
$AD-$AF Reserved
$B0 SRC ProDOS ORCA/M & APW source file
$B1 OBJ ProDOS ORCA/M & APW object file
$B2 LIB ProDOS ORCA/M & APW library file
$B3 S16 ProDOS ProDOS16 system file
$B4 RTL ProDOS ProDOS16 runtime library
$B5 EXE ProDOS APW shell command file
$B6 STR ProDOS ProDOS16 startup init file
$B7 TSF ProDOS ProDOS16 temporary init file
$B8 NDA ProDOS ProDOS16 new desk accessory
$B9 CDA ProDOS ProDOS16 classic desk accessory
$BA TOL ProDOS ProDOS16 toolset file
$BB DRV ProDOS ProDOS16 driver file
$BC-$BE Reserved for ProDOS16 load file
$BF DOC ProDOS document file
$C0 PNT ProDOS //gs paint document
$C1 SCR ProDOS //gs screen file
$C2-$C7 Reserved
$C8 FNT ProDOS Printer font file
$C9 ProDOS finder files
$CA ProDOS finder icons
$CB-$DF Reserved
$E0 LBR ProDOS Apple archive library file
$E1 Unknown (unlisted)
$E2 ATI ProDOS Appletalk init file
$E3-$EE Reserved
$EF PAS ProDOS ProDOS Pascal file
$F0 CMD ProDOS added command file
$F1-$F8 ProDOS User defined filetypes
(popular ones include:)
$F1 OVL ProDOS Overlay file
$F2 DBF ProDOS Database file
$F3 PAD ProDOS MouseWrite file
$F4 MCR ProDOS AE Pro macro file
$F5 ECP ProDOS ECP batch file
$F6 DSC ProDOS description file
$F7 TMP ProDOS temporary work file
$F8 RSX ProDOS linkable object module
$F9 IMG ProDOS ProDOS image file
$FA INT ProDOS Integer BASIC program
$FB IVR ProDOS Integer BASIC variables file
$FC BAS ProDOS AppleSoft BASIC program
$FD VAR ProDOS AppleSoft BASIC variables file
$FE REL ProDOS ProDOS EDASM relocatable object module file
$FF SYS ProDOS ProDOS8 system file
Table 1-6: PRODOS file types, part 2
-------------------------------------------------------------------------------
Apple II Kermit Page 36
-------------------------------------------------------------------------------
Index
Apple II 1 Padding 16
Apple II Keypad 17 Prodos file system 4
Apple II+ keyboard 7 Prompting 6
Applesoft 13
Archiving files 3 Q 8, 10
Quote-char 16
Backspace key 16
Binary 13 Readme 22
Blink 7 RECEIVE Command 10
REMOTE Command 10
CA key 17, 18 RENAME Command 10
CATALOG Command 6 RM Command 8
CD Command 15
CONNECT Command 6 SEND Command 10
Control-c 11 SERVER Command 11
Cr-cr,lf 16 SET APPLICATION-MODE 12
SET BAUD 12
Del key 16 SET CLEAR-SCREEN 12
Delay 9, 14, 17 SET Command 11
DELETE Command 8 SET CURSOR-KEYS-VT100 12
Dos 2 SET DEBUGGING 12
Dos filenames 2 SET DEFAULT-DISK 12
SET DISPLAY 12
Eight-bit-quote 16 SET ESCAPE 13
End-of-line 16 SET FILE-TYPE 13
Escape character 9 SET FILE-WARNING 13
EXIT Command 8 SET FLOW 14
SET KEYBOARD 14
Game button 17, 18 SET LOCAL-ECHO 14
GET Command 8 SET PARITY 14
SET PREFIX 15
HELP Command 9 SET PRINTER 15
SET PROTOCOL 15
Install 22 SET RECEIVE 15
Integer 13 SET SEND 16
SET SLOT 16
Kermit 15 SET SWAP 16
Kermit.help 22 SET TERMINAL 17
Kermit.init 22 SET TIMER 16
KERMIT.MODEM 9 SET TIMING 17
SHOW command 18
LOCK Command 9 Smart modem 9
LOG Command 9 Start-of-packet 16
LS Command 6 STATUS Command 21
MODEM Command 9 TAKE Command 21
Monitor 17 Text 13
Timeout 16
OA key 17, 18 TYPE Command 21
Other 13
UNLOCK Command 21
Packet-length 16
Pad-char 16 Vt100 17
Apple II Kermit Page 37
-------------------------------------------------------------------------------
VT100 Emulation 17
Vt52 17
VT52 Emulation 17
Xmodem 10, 15
Apple II Kermit Page i
-------------------------------------------------------------------------------
Table of Contents
1. Apple II Kermit 1
1.1. Supported Systems and Devices 2
1.2. The DOS 3.3 File System 2
1.3. The PRODOS File System 4
1.4. Program Operation 4
1.5. Kermit-65 Commands 6
1.5.1. The CATALOG Command 6
1.5.2. The CONNECT Command 6
1.5.3. The DELETE Command 8
1.5.4. The EXIT and QUIT Commands 8
1.5.5. The GET Command 8
1.5.6. The HELP Command 9
1.5.7. The LOCK Command 9
1.5.8. The LOG Command 9
1.5.9. The MODEM Command 9
1.5.10. The RECEIVE Command 10
1.5.11. The REMOTE Command 10
1.5.12. The RENAME Command 10
1.5.13. The SEND Command 10
1.5.14. The SERVER Command 11
1.5.15. The SET Command 11
1.5.16. the SHOW command 18
1.5.17. The STATUS Command 21
1.5.18. The TAKE Command 21
1.5.19. The TYPE Command 21
1.5.20. The UNLOCK Command 21
1.6. Installation 21
1.6.1. Standard Installation 22
1.6.2. Alternate Installation 23
1.7. Problems 24
1.8. Customizing Kermit-65 31
Index 36
Apple II Kermit Page ii
-------------------------------------------------------------------------------
List of Figures
Figure 1-1: VT100 Keypad on an Apple Keyboard 18
Figure 1-2: VT100 Keypad on an Apple//gs 19
Figure 1-3: VT52 Keypad on an Apple Keyboard 20
Apple II Kermit Page iii
-------------------------------------------------------------------------------
List of Tables
Table 1-1: Apple II Communication Cards Supported by Kermit-65 2
Table 1-2: Kermit-65 Single-Character CONNECT Escape Commands 7
Table 1-3: Apple II/II+ Keyboard Escapes 8
Table 1-4: Communications card vector area 33
Table 1-5: PRODOS file types, part 1 34
Table 1-6: PRODOS file types, part 2 35