💾 Archived View for gemini.spam.works › mirrors › textfiles › occult › PAGAN › pyramid1.txt captured on 2022-07-17 at 09:58:25.
⬅️ Previous capture (2022-06-12)
-=-=-=-=-=-=-
PYRAMID POWER AND OTHER EFFECTS from Jeff Johnston
----------------------------------------------------------------------
Some of my research was based on following experiments that other
people have performed. The one item that got me started was an
electron microscopic photograph of a razor blade that had been treated
in a pyramid. There was a BEFORE and AFTER shot showing how the metal
had re-generated itself at the crystalline level. I found this very
interesting, because to me it seemed like pretty good verification for
some kind of effect. I suspect that multiple frequencies are involved
and that is why I branched out in the direction of bio-medical
effects, i.e. brainwave activity, some form that could be tried out
with different people under different circumstances, to see any
consistancy of effects.
I did this research and other experiments that I haven't described yet,
about 8 or 9 years ago. This pyramid power effect is only part of what
I have been tracking as a larger effect that works in other areas
too. This may sound a little crazy but from what I can tell so far from
my research, it is linked to type of "Earth Energy Effect" (I need some
sort of name to try to describe this) that has been used in various
forms throughout what we know as "recorded history". When I have more
time available I will attempt to write a summary of experiments
performed over the last 20 years. This involves pyramid power and other
related material.
One of my conclusions is that SHAPE has an effect on surrounding
matter, and that it doesn't have to be in the exact shape of a pyramid
to have an effect. For example, I have experimented with altering the
base angle to apex ratio and found that other shapes will work also.
This led me into another area in the design of antennas for capturing
this type of energy. I built a few prototype designs that were not even
square and still got some results. Not always as good results as using
a standard pyramid, but they did something.
To answer your question: YES. The longest running experiment that I did
in this area was a preservation experiment that lasted 18 months. I
used a piece of raw pork. If anything is going to go bad, raw pork will
in about 48 hours. After 18 months there was no evidence of it smelling
or being bad. Only have 2 min. left will cont. another time.
The following is a reply to answer some questions.
In answer to the question what brainwave states did the subjects
experience:
Alpha, Beta and Theta. In most subjects alpha was experienced in the
first 15 minutes. About half of the group experienced theta around the
40 to 50 minute time frame. I tried several lengths of time, 1 hour, 1
and 1/2 hours, 2 hours, and 3 hours. I experimented with a number of
variables of time length, also the time of day the experiment was done.
I was looking for some connection to some research done in Germany
starting in the 1940's dealing with what had now come to be known as
Cosmobiology. (Today the Russians take this quite seriously and
continue doing research in this area.) Cosmobiology is still "alive"
and well in Germany today, as well as some research being done in the
United States.Cosmobiology deals with cycles of time.
It was some of the original research that spawned another subject,
biorhythms. Now, a lot of what is being done as biorhythms today has
kind of strayed from the original path, and the type of programs or
information I see on the subject today has been diluted quite a bit and
as a result a lot of the accuracy has been lost. So please don't judge
the Parent Cosmobiology, by the Child Biorhythms who due to
misunderstanding and lack of applied methods has caused some people to
question it's validity.
For biorhythms to work properly it has to be based on the exact time of
the begining of the cycle. This means to the nearest minute. Most
software programs available today are only in the ballpark because they
are based on a window of time that is 24 hours wide. This is too wide
for accurate results in my opinion. Consult the original research done
in this area and I think you will see why. It's a question of
methodology. See Rineholt Ebertein et al.
In answer to the question: Am I still doing research into the pyramid
effect?
Yes I am, but not just "pyramid" research. I am in the slow process of
writing a book that includes some of the information of pyramid effects
but the core of the book material is on some other subjects that are
related. These involve some of the things I stumbled across while doing
research on the pyramid effects and other fields that at first I
thought were entirely unrelated.
In answer to what type of control materials to use:
I would recommend using two items as closely matched as possible. For
example, If you are planning on using razor blades in an experiment
then be sure that both the control and the experimented blade are from
the same SET or package from the same manufacturing facility. If using
fruit or organic material, then for example, use one apple but cut the
apple in half using one side for control and one side for the
experiment.
On the subject of controls, be sure that the area that you are doing
the experiment in is as closely matched as possible in temp. humidity,
light, electromagnetic fields, alignment etc., and that the area being
observed be as secure as possible. The reason I say that is once upon a
time I had an experiment that ran for several weeks and I got one
result. I re-ran it and got another result. I re-ran it again and got
another result. Well by this time I was wondering what the problem was,
and after a lengthly investigation found out that someone in my
household had been cleaning in the area and unknowingly contaminated
the experiment. (Drove me crazy trying to figure it out.) If you are
doing preservation experiments, or any other for that matter, be sure
you do not exceed 5% of the volume of the pyramid.
In answer to the question: Can you eat fruit preserved in a pyramid?
Yes. I have eaten lots of things preserved this way. (This was done 8
or 9 years ago, I am still alive so I guess there are no known toxic
effects.) One of my organic subjects was a carrot that at the begining
of the experiment was about 9 inches long by 1 and 1/4 inch around. 18
months later this carrot was about 3 inches long and about the size of
a pencil around. I ate it. It tasted fine, had a good flavor and seemed
to me not to have changed too much except for the water content.
In answer to the question: What materials did I build the large
meditation pyramid out of?
Well, all together I built several hundred pyramids, out of all sorts
of materials, from 1 inch to 12 feet on the base. The meditation
pyramid that I did the brainwave experiments in was made of aluminum
tubing 3/4 inch diameter. On the subject of materials, I have found
that different materials have different effects. Some of these effects
can be classified as "hardcore scientific" and some are purely
subjective states reported by the person having the experience. A.K.A.
"a feeling inside".
If you are using metal materials then I recommend not to use young
plants, because from what I can tell, the effect is too intense for
them at a young age. If you are dealing with experimenting with purely
biological effects then I recommend using wood or organic materials. I
have found that in some circumstances that if you are looking for
effects in VLV (Very Low Voltage) then the only way to go is pure
organic materials.
I think that covers this batch of questions. I wish you well in your
experiments. The above reminds me of an experiment I did with the 12
foot based aluminum tubing pyramid that I have found very interesting.
I built an insulated copper coil of about 120 winds, and placed it
about 18 inches down from the apex of the pyramid. I ran the wires down
the northeast side of the pyramid aligned to magnetic north. I
connected the wires to a device that sent electrical signals through it
operating at 2 million cycles per second at 50,000 volts A.C. I let
this run for several hours. I noticed afterwards that it seemed to
magnify the effect of the pyramid, but what really got me was that
there was a faint glow in the dark at the apex. This was related to the
charging done before hand. What gave me part of the idea to try this
was a picture I saw, a kirlian photograph that showed a glow around the
apex of a pyramid.
As far as research goes, a very good book on the subject is called The
Great Pyramid by Christopher Bird. In it he covers the history and
mathematics involved especially in relationship to the solar system. I
would recommend it as one of the best researched books in this area.
This guy spent years digging through libraries all over the world,
using documents that are preserved in archives, listing some of the
earliest recorded information available.
I would be glad to answer more of your questions as time permits. Just
leave your questions as mail on paranet and I will collect them and
issue another upload. That way everyone that is interested can see the
answers to their questions and also so I don't answer the same question
over and over and over to different people. I am also interested in any
original research in this area that anyone would care to share with me,
especially in the areas of geomagnetic disturbances, electromagnetic
force fields and related subjects. Thank you, Jeff Johnston.
NOTE FROM THE MAGICIAN Crystal Cave 719-391-1092.
It has been proven beyond a shadow of a doubt that the use of aluminum
in building pyramids causes a distinct loss of the power of said
object. It is best to use anything other than this metal.
EOF>