💾 Archived View for gemini.spam.works › mirrors › textfiles › hacking › CABLE › settings.txt captured on 2022-07-17 at 01:54:41.
⬅️ Previous capture (2022-06-12)
-=-=-=-=-=-=-
=======================================
= Voyager parameters/running settings =
=======================================
Below you find a table with different pc's (cpu's) and decoders with
the neccesary running settings.
Best thing is to run your pc as clean as possible eg. no resident programs.
All settings are for VideoCrypt-1, EuroCrypt mode uses different settings.
-------------------------------------------------------------------------------
Processor | Decoder type(s) | Parameters Milliseconds | Microseconds
-----------+--------------------+----------------------------------------------
8086/10 | SVA1 | Voyager 1 e m wa0 wb0 |e m wa0 wb0
286/12 | SVA1 | Voyager 1 e m wa0 wb0 |e m wa0 wb0
286/16 | SVA1 | Voyager 1 wa0 wb0 |
286/16 | SVA1X | Voyager 1 wa0 wb1 |
286/16 | SVA1 | Voyager 1 wa300 wb300 |
386SX/16 | SVA1 | Voyager 1 |wa0 wb0
386SX/16 | Pace MSS 1000 | Voyager 1 m |
386SX/16 | Echostar LT 8700 | Voyager 1 |
386SX/16 | Amstrad SRD 520 | Voyager 1 wa500 |wa50 wb1
386SX/20 | SVA-1 | Voyager 1 e m |
386/33 | Pace MSS 500VC | Voyager 1 m wc150000 |
386/40 | Technisat VC2002S | Voyager 1 |
386/40 | Pace MSS 500VC | Voyager 1 wc150000 |
386/40 | EuroSky | Voyager 1 m wa30000 wb500 |
486/33 | Pace MSS 1000 | Voyager 1 wb5000 |wa30 wb0
486/66 | Pace VC100 | Voyager 1 |wa50 wb1
Pentium | SVA-1 | Voyager 1 wb1000 |wa50 wb2
Pentium75| Pace MSS 1000 | Voyager 1 wa50000 wb1000 wc50000
| |
| Experimenting with wax thru wbx may be |
| necessary to get the thing working. |
----------------------------------------------------------------------
--==< All PC's with Pace MSS systems >==--
Voyager is patched to work with Pace MSS systems but if your decoder
locks-up use the wc parameter. wc150000 seems to work on some
systems but you might have to try other values.
All problems with Pace decoders are solved with the implementation of the ZKT.
On Pace MSS systems you can also try to use the second card slot as this
one doesn't have the ZKT implemented.
Also you might try to set the 'wb' parameter until the 'online' message is
flashing and use the 'M' parameter to getrid of on-screen messages.
--==< Have fun, William >==--
For additions or comments call: Compusat's International Satellite BBS
+31-(0)30-6051466 / +31-(0)30-6050573 data (1200-28K8)
or send a fax to one of the above numbers or E-Mail to Ceylon@xs4all.nl
It is not possible to reply to your fax. Don't send messages about future
release dates.
Part of the Voyager 1.3j Documentation