💾 Archived View for mirrors.apple2.org.za › archive › apple.cabi.net › FAQs.and.INFO › IIGS.SPEC.INF… captured on 2023-01-29 at 07:50:25.

View Raw

More Information

-=-=-=-=-=-=-

Newsgroups: comp.sys.apple2.comm
Path: news.weeg.uiowa.edu!news.uiowa.edu!hobbes.physics.uiowa.edu!math.ohio-state.edu!howland.reston.ans.net!gatech!udel!news2.sprintlink.net!news.sprintlink.net!crash!pro-newton!danb
From: danb@pro-newton.cts.com (Dan Brown)
Subject: Re: ** Wanted Pinouts on power for gs mb **
Organization: ProLine [pro-newton] -- Hesperia, CA +1 619 956 2631
Date: Wed, 18 May 1994 06:52:51 GMT
Message-ID: <1994May17.235251.1105@pro-newton.cts.com>
To: comp-sys-apple2-comm@crash
In-Reply-To: huangbri@cps.msu.edu (Brian C Huang)
References: <2r7ten$fqi@msuinfo.cl.msu.edu>
Sender: news@crash.cts.com (news subsystem)
Nntp-Posting-Host: crash.cts.com
Lines: 35

>From the IIgs Hardware Reference, 2d Ed., pp 202-203:

"The power input requirements are 107- to 132-volt alternating current.  The
power output specifications are as follows:

"+12 volts at 1 A
"-12 volts at 0.25 A
"+5 volts at 4 A
"-5 volts at 0.25 A

"The power connector is a 6-pin, molex-type, keyed in-line socket.  Figure
9-1 [below] shows the pin configuration of the power connector.  Table 9-1
[below] gives a description of each pin.

"        FIGURE 9-1

"        1       2       NC      4       5       6       7

 
"        TABLE 9-1

"Pin     Signal  Description

"1       GND     Ground
"2       GND     Ground
"3       NC      No connection
"4       +5V     +5-volt supply
"5       +12V    +12-volt supply
"6       -12V    -12-volt supply
"7       -5V     -5-volt supply"

 ----------------------------------
Dan Brown, Sysop of pro-newton     Internet: danb@pro-newton.cts.com
 Above opinions are not those of Mensa, which has no opinions.
  GO D++ P+/-P+ C++ L+.5 M++ S+ G+- W+ T R-