💾 Archived View for gmi.noulin.net › man › man2 › pipe.2.gmi captured on 2022-07-17 at 00:47:51. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2022-06-12)
-=-=-=-=-=-=-
PIPE(2) Linux Programmer's Manual PIPE(2)
NAME
pipe, pipe2 - create pipe
SYNOPSIS
#include <unistd.h>
int pipe(int pipefd[2]);
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <fcntl.h> /* Definition of O_* constants */
#include <unistd.h>
int pipe2(int pipefd[2], int flags);
/* On Alpha, IA-64, MIPS, SuperH, and SPARC/SPARC64, pipe() has the
following prototype; see NOTES */
#include <unistd.h>
struct fd_pair {
long fd[2];
};
struct fd_pair pipe(void);
DESCRIPTION
pipe() creates a pipe, a unidirectional data channel that can be used for interprocess communication. The array pipefd is used to return two file descriptors
referring to the ends of the pipe. pipefd[0] refers to the read end of the pipe. pipefd[1] refers to the write end of the pipe. Data written to the write end
of the pipe is buffered by the kernel until it is read from the read end of the pipe. For further details, see pipe(7).
If flags is 0, then pipe2() is the same as pipe(). The following values can be bitwise ORed in flags to obtain different behavior:
O_CLOEXEC
Set the close-on-exec (FD_CLOEXEC) flag on the two new file descriptors. See the description of the same flag in open(2) for reasons why this may be use‐
ful.
O_DIRECT (since Linux 3.4)
Create a pipe that performs I/O in "packet" mode. Each write(2) to the pipe is dealt with as a separate packet, and read(2)s from the pipe will read one
packet at a time. Note the following points:
* Writes of greater than PIPE_BUF bytes (see pipe(7)) will be split into multiple packets. The constant PIPE_BUF is defined in <limits.h>.
* If a read(2) specifies a buffer size that is smaller than the next packet, then the requested number of bytes are read, and the excess bytes in the
packet are discarded. Specifying a buffer size of PIPE_BUF will be sufficient to read the largest possible packets (see the previous point).
* Zero-length packets are not supported. (A read(2) that specifies a buffer size of zero is a no-op, and returns 0.)
Older kernels that do not support this flag will indicate this via an EINVAL error.
Since Linux 4.5, it is possible to change the O_DIRECT setting of a pipe file descriptor using fcntl(2).
O_NONBLOCK
Set the O_NONBLOCK file status flag on the open file descriptions referred to by the new file descriptors. Using this flag saves extra calls to fcntl(2)
to achieve the same result.
RETURN VALUE
On success, zero is returned. On error, -1 is returned, errno is set to indicate the error, and pipefd is left unchanged.
On Linux (and other systems), pipe() does not modify pipefd on failure. A requirement standardizing this behavior was added in POSIX.1-2008 TC2. The Linux-spe‐
cific pipe2() system call likewise does not modify pipefd on failure.
ERRORS
EFAULT pipefd is not valid.
EINVAL (pipe2()) Invalid value in flags.
EMFILE The per-process limit on the number of open file descriptors has been reached.
ENFILE The system-wide limit on the total number of open files has been reached.
ENFILE The user hard limit on memory that can be allocated for pipes has been reached and the caller is not privileged; see pipe(7).
VERSIONS
pipe2() was added to Linux in version 2.6.27; glibc support is available starting with version 2.9.
CONFORMING TO
pipe(): POSIX.1-2001, POSIX.1-2008.
pipe2() is Linux-specific.
NOTES
The System V ABI on some architectures allows the use of more than one register for returning multiple values; several architectures (namely, Alpha, IA-64, MIPS,
SuperH, and SPARC/SPARC64) (ab)use this feature in order to implement the pipe() system call in a functional manner: the call doesn't take any arguments and re‐
turns a pair of file descriptors as the return value on success. The glibc pipe() wrapper function transparently deals with this. See syscall(2) for informa‐
tion regarding registers used for storing second file descriptor.
EXAMPLES
The following program creates a pipe, and then fork(2)s to create a child process; the child inherits a duplicate set of file descriptors that refer to the same
pipe. After the fork(2), each process closes the file descriptors that it doesn't need for the pipe (see pipe(7)). The parent then writes the string contained
in the program's command-line argument to the pipe, and the child reads this string a byte at a time from the pipe and echoes it on standard output.
Program source
#include <sys/types.h>
#include <sys/wait.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
int
main(int argc, char *argv[])
{
int pipefd[2];
pid_t cpid;
char buf;
if (argc != 2) {
fprintf(stderr, "Usage: %s <string>\n", argv[0]);
exit(EXIT_FAILURE);
}
if (pipe(pipefd) == -1) {
perror("pipe");
exit(EXIT_FAILURE);
}
cpid = fork();
if (cpid == -1) {
perror("fork");
exit(EXIT_FAILURE);
}
if (cpid == 0) { /* Child reads from pipe */
close(pipefd[1]); /* Close unused write end */
while (read(pipefd[0], &buf, 1) > 0)
write(STDOUT_FILENO, &buf, 1);
write(STDOUT_FILENO, "\n", 1);
close(pipefd[0]);
_exit(EXIT_SUCCESS);
} else { /* Parent writes argv[1] to pipe */
close(pipefd[0]); /* Close unused read end */
write(pipefd[1], argv[1], strlen(argv[1]));
close(pipefd[1]); /* Reader will see EOF */
wait(NULL); /* Wait for child */
exit(EXIT_SUCCESS);
}
}
SEE ALSO
fork(2), read(2), socketpair(2), splice(2), tee(2), vmsplice(2), write(2), popen(3), pipe(7)
Linux 2021-03-22 PIPE(2)