💾 Archived View for gemini.spam.works › mirrors › textfiles › computers › DOCUMENTATION › fd220.txt captured on 2022-07-16 at 23:36:59.
⬅️ Previous capture (2022-06-12)
-=-=-=-=-=-=-
??????????????????????????????????????????????
??????????????????????????????????????????????
??How to use a fax modem with frontdoor 2.20??
??????????????????????????????????????????????
??????????????????????????????????????????????
This document was prepared by:
Mark Kerr @ 2:443/59, 2:443/60(fax) fidonet
This is a functional setup for fd 2.20 and a supra v32bis faxmodem with 1.71
roms.
Fossil is BNU 1.70 locked at 57600 copyright David Nugent
BGFAX is 1.00beta5 copyright B. J. Guillot
XRobot is 3.01 for dos copyright Joaquim Homrighausen
Zfax is 2.23 copyright Zyxel Corporation
This setup will receive faxes using bgfax as a rearend, xrobot to create
the netmail and zfax to view the fax.
Any ideas for improvements, queries, modifications should be forwarded to
the author via netmail for consideration..
???????????
?IMPORTANT?
???????????
This setup works for me, however it is strongly recommended that you read
fully the documentation for all the products involved!!!!!!!!
????????????????????????????????????
?SETTING UP - the interesting bit..?
????????????????????????????????????
I have set the received fax dir as d:\zfax\rcv
bgfax is on the c: drive which is a ramdisk
?????????
?FDSETUP?
?????????
MAILER/FAX
RcvdFiles D:\ZFAX\RCV\
Recipient Mark Kerr
Print No (or Yes :-)
Printer d:\zfax\zfax.com 2 =F
MAILER/ERRORLEVELS
Fax 254
Received mail 200
Create BAT.file Yes
EDITOR/FAX
Viewer d:\zfax\zfax.com 4 =F
Automatic Yes
Remove No
MODEM/HARDWARE
Serial port 2
Locked port Yes
Maximum baudrate Fixed
Reset modem to connect speed Yes
Lower DTR when busy Yes
Lower DTR to terminate call Yes
Toggle DTR before dialing Yes
Carrier detect mask (CDMASK) 128
MODEM/CONNECT MESSAGES
Fax FAX
MODEM/COMMAND STRINGS
Escape code +++
Return on-line ~ATO|
Onhook ATH0|
Offhook ~ATH1|
Dial ATDT
??Prefix
??Suffix |
Delay 5
Init-1 ATZ|
Init-2 AT+FAA=1+FCR=1|
Init-3 AT+FLID="Your Name Here....."+FDCC=1,5|
Down ATH1|
Reset ATz|
MODEM/ANSWER CONTROL
Manual answer Yes
Force answer AT+FAA=1;A|
Answer delay 5
Enable LDFRS No
MODEM/FAX
Internal No
??????????????????????????????????????????
?RELEVANT PORTIONS OF THE MAIN BATCH FILE?
??????????????????????????????????????????
if errorlevel 254 goto FAX
:FAX
c:\bgfax.exe /FAX d:\zfax\rcv 2 z
if errorlevel 4 call d:\zfax\rcv\doprint
goto START
?????????????????????????????????????
?SAMPLE DOPRINT.BAT CREATED BY BGFAX?
?????????????????????????????????????
D:\ZFAX\RCV\EXEPRINT.BAT D:\ZFAX\RCV\FAX0004.ZFX
?????????????????
?MY EXEPRINT.BAT?
?????????????????
d:\fd\xrdos send /f%1 /r2:000/000 /n3 /mb+
Here I use XRobot 301 for dos to send me the notification of a fax
/F%1 uses the second part of bgfax's dofax.bat to find the file
/r is your address
/n3 is user number 3 in my fdsetup (called "FAX")
/mb+ sets the fax attach msg attribute
???????????????????????????????????????????????
?POSSIBLE EXEPRINT.BAT TO ALLOW FAX FORWARDING?
???????????????????????????????????????????????
d:\fd\xrdos send /f%1 /r2:000/000 /n3 /mb+
c:\bgfax /send %1 232 343 5566
this would announce the fax in your netmail folder, then attempt to
forward the fax to 232 343 556 using the information in your bgfax.cnf
file.
????????????????
?MY SUPRA SETUP?
????????????????
AT&V
ACTIVE PROFILE:
B1 E1 L3 M1 N1 Q0 T V1 W2 X4 Y0 %C1 %E1 %G1 \N3 &C1 &D2 &K3 &Q5 &R0 &S0 &X0 &Y0
S00:000 S01:000 S02:043 S03:013 S04:010 S05:008 S06:002 S07:050 S08:002 S09:000
S10:014 S11:048 S12:050 S18:000 S23:063 S25:005 S26:001 S36:007 S37:000 S38:020
S40:071 S46:138 S48:007 S95:003 S109:062 S110:002
??????????
? HISTORY?
??????????
Updated 09/09/93
bgfax now supports fax transmission from the commandline (beta 5)
adding a suitable command to your exeprint.bat should allow the
received fax to be retransmitted/forwarded if you wish. Possible
uses could be if you are expecting an important an important fax
and will not be at your machine but at another location with a
suitable fax. The problem is all faxes received until your return
would be forwarded, unless you modified or changed the batchfile
remotely.
This requires that you edit the bgfax.cnf file to suit your modem
and set an environment variable to point at its location. Full
details of this can be found in the bgfax documentation.
Updated 25/8/93
bgfax now makes a doprint.bat which calls exeprint.bat
with beta 02 dofax.bat exefax.bat
Known Bugs
xrobot doesn't recognize the $task$ in the fd logname.