💾 Archived View for gmi.noulin.net › man › man8 › ld-linux.8.gmi captured on 2022-07-17 at 02:02:02. Gemini links have been rewritten to link to archived content

View Raw

More Information

⬅️ Previous capture (2022-06-12)

-=-=-=-=-=-=-

LD.SO(8)                                                                Linux Programmer's Manual                                                               LD.SO(8)

NAME
       ld.so, ld-linux.so - dynamic linker/loader

SYNOPSIS
       The dynamic linker can be run either indirectly by running some dynamically linked program or shared object (in which case no command-line options to the dynamic
       linker can be passed and, in the ELF case, the dynamic linker which is stored in the .interp section of the program is executed) or directly by running:

       /lib/ld-linux.so.*  [OPTIONS] [PROGRAM [ARGUMENTS]]

DESCRIPTION
       The programs ld.so and ld-linux.so* find and load the shared objects (shared libraries) needed by a program, prepare the program to run, and then run it.

       Linux binaries require dynamic linking (linking at run time) unless the -static option was given to ld(1) during compilation.

       The program ld.so handles a.out binaries, a binary format used long ago.  The program ld-linux.so* (/lib/ld-linux.so.1 for libc5, /lib/ld-linux.so.2 for  glibc2)
       handles binaries that are in the more modern ELF format.  Both programs have the same behavior, and use the same support files and programs (ldd(1), ldconfig(8),
       and /etc/ld.so.conf).

       When resolving shared object dependencies, the dynamic linker first inspects each dependency string to see if it contains a slash (this can occur if a shared ob‐
       ject  pathname  containing slashes was specified at link time).  If a slash is found, then the dependency string is interpreted as a (relative or absolute) path‐
       name, and the shared object is loaded using that pathname.

       If a shared object dependency does not contain a slash, then it is searched for in the following order:

       o  Using the directories specified in the DT_RPATH dynamic section attribute of the binary if present and DT_RUNPATH attribute does not exist.  Use  of  DT_RPATH
          is deprecated.

       o  Using  the  environment  variable LD_LIBRARY_PATH, unless the executable is being run in secure-execution mode (see below), in which case this variable is ig‐
          nored.

       o  Using the directories specified in the DT_RUNPATH dynamic section attribute of the binary if present.  Such directories are searched only to  find  those  ob‐
          jects  required  by  DT_NEEDED  (direct dependencies) entries and do not apply to those objects' children, which must themselves have their own DT_RUNPATH en‐
          tries.  This is unlike DT_RPATH, which is applied to searches for all children in the dependency tree.

       o  From the cache file /etc/ld.so.cache, which contains a compiled list of candidate shared objects previously found in the augmented library path.  If, however,
          the  binary  was  linked with the -z nodeflib linker option, shared objects in the default paths are skipped.  Shared objects installed in hardware capability
          directories (see below) are preferred to other shared objects.

       o  In the default path /lib, and then /usr/lib.  (On some 64-bit architectures, the default paths for 64-bit shared objects are /lib64, and then /usr/lib64.)  If
          the binary was linked with the -z nodeflib linker option, this step is skipped.

   Dynamic string tokens
       In several places, the dynamic linker expands dynamic string tokens:

       o  In the environment variables LD_LIBRARY_PATH, LD_PRELOAD, and LD_AUDIT,

       o  inside the values of the dynamic section tags DT_NEEDED, DT_RPATH, DT_RUNPATH, DT_AUDIT, and DT_DEPAUDIT of ELF binaries,

       o  in the arguments to the ld.so command line options --audit, --library-path, and --preload (see below), and

       o  in the filename arguments to the dlopen(3) and dlmopen(3) functions.

       The substituted tokens are as follows:

       $ORIGIN (or equivalently ${ORIGIN})
              This expands to the directory containing the program or shared object.  Thus, an application located in somedir/app could be compiled with

                  gcc -Wl,-rpath,'$ORIGIN/../lib'

              so  that it finds an associated shared object in somedir/lib no matter where somedir is located in the directory hierarchy.  This facilitates the creation
              of "turn-key" applications that do not need to be installed into special directories, but can instead be unpacked into any directory and still find  their
              own shared objects.

       $LIB (or equivalently ${LIB})
              This expands to lib or lib64 depending on the architecture (e.g., on x86-64, it expands to lib64 and on x86-32, it expands to lib).

       $PLATFORM (or equivalently ${PLATFORM})
              This expands to a string corresponding to the processor type of the host system (e.g., "x86_64").  On some architectures, the Linux kernel doesn't provide
              a platform string to the dynamic linker.  The value of this string is taken from the AT_PLATFORM value in the auxiliary vector (see getauxval(3)).

       Note that the dynamic string tokens have to be quoted properly when set from a shell, to prevent their expansion as shell or environment variables.

OPTIONS
       --argv0 string (since glibc 2.33)
              Set argv[0] to the value string before running the program.

       --audit list
              Use objects named in list as auditors.  The objects in list are delimited by colons.

       --inhibit-cache
              Do not use /etc/ld.so.cache.

       --library-path path
              Use path instead of LD_LIBRARY_PATH environment variable setting (see below).  The names ORIGIN, LIB, and PLATFORM  are  interpreted  as  for  the  LD_LI‐
              BRARY_PATH environment variable.

       --inhibit-rpath list
              Ignore  RPATH  and RUNPATH information in object names in list.  This option is ignored when running in secure-execution mode (see below).  The objects in
              list are delimited by colons or spaces.

       --list List all dependencies and how they are resolved.

       --list-tunables (since 2.33)
              Print the names and values of all tunables, along with the minimum and maximum allowed values.

       --preload list (since glibc 2.30)
              Preload the objects specified in list.  The objects in list are delimited by colons or spaces.  The objects are preloaded as explained in the  description
              of the LD_PRELOAD environment variable below.

              By  contrast  with LD_PRELOAD, the --preload option provides a way to perform preloading for a single executable without affecting preloading performed in
              any child process that executes a new program.

       --verify
              Verify that program is dynamically linked and this dynamic linker can handle it.

ENVIRONMENT
       Various environment variables influence the operation of the dynamic linker.

   Secure-execution mode
       For security reasons, if the dynamic linker determines that a binary should be run in secure-execution mode, the effects of some environment variables are voided
       or modified, and furthermore those environment variables are stripped from the environment, so that the program does not even see the definitions.  Some of these
       environment variables affect the operation of the dynamic linker itself, and are described below.  Other environment  variables  treated  in  this  way  include:
       GCONV_PATH, GETCONF_DIR, HOSTALIASES, LOCALDOMAIN, LOCPATH, MALLOC_TRACE, NIS_PATH, NLSPATH, RESOLV_HOST_CONF, RES_OPTIONS, TMPDIR, and TZDIR.

       A  binary is executed in secure-execution mode if the AT_SECURE entry in the auxiliary vector (see getauxval(3)) has a nonzero value.  This entry may have a non‐
       zero value for various reasons, including:

       *  The process's real and effective user IDs differ, or the real and effective group IDs differ.  This typically occurs as a result of executing a set-user-ID or
          set-group-ID program.

       *  A process with a non-root user ID executed a binary that conferred capabilities to the process.

       *  A nonzero value may have been set by a Linux Security Module.

   Environment variables
       Among the more important environment variables are the following:

       LD_ASSUME_KERNEL (since glibc 2.2.3)
              Each  shared object can inform the dynamic linker of the minimum kernel ABI version that it requires.  (This requirement is encoded in an ELF note section
              that is viewable via readelf -n as a section labeled NT_GNU_ABI_TAG.)  At run time, the dynamic linker determines the ABI version of  the  running  kernel
              and will reject loading shared objects that specify minimum ABI versions that exceed that ABI version.

              LD_ASSUME_KERNEL  can  be used to cause the dynamic linker to assume that it is running on a system with a different kernel ABI version.  For example, the
              following command line causes the dynamic linker to assume it is running on Linux 2.2.5 when loading the shared objects required by myprog:

                  $ LD_ASSUME_KERNEL=2.2.5 ./myprog

              On systems that provide multiple versions of a shared object (in different directories in the search path) that have different minimum kernel ABI  version
              requirements, LD_ASSUME_KERNEL can be used to select the version of the object that is used (dependent on the directory search order).

              Historically,  the  most  common use of the LD_ASSUME_KERNEL feature was to manually select the older LinuxThreads POSIX threads implementation on systems
              that provided both LinuxThreads and NPTL (which latter was typically the default on such systems); see pthreads(7).

       LD_BIND_NOW (since glibc 2.1.1)
              If set to a nonempty string, causes the dynamic linker to resolve all symbols at program startup instead of deferring  function  call  resolution  to  the
              point when they are first referenced.  This is useful when using a debugger.

       LD_LIBRARY_PATH
              A  list  of  directories  in which to search for ELF libraries at execution time.  The items in the list are separated by either colons or semicolons, and
              there is no support for escaping either separator.  A zero-length directory name indicates the current working directory.

              This variable is ignored in secure-execution mode.

              Within the pathnames specified in LD_LIBRARY_PATH, the dynamic linker expands the tokens $ORIGIN, $LIB, and $PLATFORM (or the versions using curly  braces
              around  the  names)  as described above in Dynamic string tokens.  Thus, for example, the following would cause a library to be searched for in either the
              lib or lib64 subdirectory below the directory containing the program to be executed:

                  $ LD_LIBRARY_PATH='$ORIGIN/$LIB' prog

              (Note the use of single quotes, which prevent expansion of $ORIGIN and $LIB as shell variables!)

       LD_PRELOAD
              A list of additional, user-specified, ELF shared objects to be loaded before all others.  This feature can be used to selectively  override  functions  in
              other shared objects.

              The items of the list can be separated by spaces or colons, and there is no support for escaping either separator.  The objects are searched for using the
              rules given under DESCRIPTION.  Objects are searched for and added to the link map in the left-to-right order specified in the list.

              In secure-execution mode, preload pathnames containing slashes are ignored.  Furthermore, shared objects are preloaded only from the standard  search  di‐
              rectories and only if they have set-user-ID mode bit enabled (which is not typical).

              Within  the  names  specified  in the LD_PRELOAD list, the dynamic linker understands the tokens $ORIGIN, $LIB, and $PLATFORM (or the versions using curly
              braces around the names) as described above in Dynamic string tokens.  (See also the discussion of quoting under the description of LD_LIBRARY_PATH.)

              There are various methods of specifying libraries to be preloaded, and these are handled in the following order:

              (1) The LD_PRELOAD environment variable.

              (2) The --preload command-line option when invoking the dynamic linker directly.

              (3) The /etc/ld.so.preload file (described below).

       LD_TRACE_LOADED_OBJECTS
              If set (to any value), causes the program to list its dynamic dependencies, as if run by ldd(1), instead of running normally.

       Then there are lots of more or less obscure variables, many obsolete or only for internal use.

       LD_AUDIT (since glibc 2.4)
              A list of user-specified, ELF shared objects to be loaded before all others in a separate linker namespace (i.e., one that does not intrude upon the  nor‐
              mal  symbol  bindings  that would occur in the process) These objects can be used to audit the operation of the dynamic linker.  The items in the list are
              colon-separated, and there is no support for escaping the separator.

              LD_AUDIT is ignored in secure-execution mode.

              The dynamic linker will notify the audit shared objects at so-called auditing checkpoints—for example, loading a new shared object, resolving a symbol, or
              calling  a  symbol from another shared object—by calling an appropriate function within the audit shared object.  For details, see rtld-audit(7).  The au‐
              diting interface is largely compatible with that provided on Solaris, as described in its Linker and Libraries Guide, in the chapter Runtime Linker Audit‐
              ing Interface.

              Within  the  names  specified  in  the  LD_AUDIT list, the dynamic linker understands the tokens $ORIGIN, $LIB, and $PLATFORM (or the versions using curly
              braces around the names) as described above in Dynamic string tokens.  (See also the discussion of quoting under the description of LD_LIBRARY_PATH.)

              Since glibc 2.13, in secure-execution mode, names in the audit list that contain slashes are ignored, and only shared objects in the standard  search  di‐
              rectories that have the set-user-ID mode bit enabled are loaded.

       LD_BIND_NOT (since glibc 2.1.95)
              If  this environment variable is set to a nonempty string, do not update the GOT (global offset table) and PLT (procedure linkage table) after resolving a
              function symbol.  By combining the use of this variable with LD_DEBUG (with the categories bindings and symbols), one can observe  all  run-time  function
              bindings.

       LD_DEBUG (since glibc 2.1)
              Output verbose debugging information about operation of the dynamic linker.  The content of this variable is one of more of the following categories, sep‐
              arated by colons, commas, or (if the value is quoted) spaces:

              help        Specifying help in the value of this variable does not run the specified program, and displays a help message about which  categories  can  be
                          specified in this environment variable.

              all         Print all debugging information (except statistics and unused; see below).

              bindings    Display information about which definition each symbol is bound to.

              files       Display progress for input file.

              libs        Display library search paths.

              reloc       Display relocation processing.

              scopes      Display scope information.

              statistics  Display relocation statistics.

              symbols     Display search paths for each symbol look-up.

              unused      Determine unused DSOs.

              versions    Display version dependencies.

              Since glibc 2.3.4, LD_DEBUG is ignored in secure-execution mode, unless the file /etc/suid-debug exists (the content of the file is irrelevant).

       LD_DEBUG_OUTPUT (since glibc 2.1)
              By  default,  LD_DEBUG output is written to standard error.  If LD_DEBUG_OUTPUT is defined, then output is written to the pathname specified by its value,
              with the suffix "." (dot) followed by the process ID appended to the pathname.

              LD_DEBUG_OUTPUT is ignored in secure-execution mode.

       LD_DYNAMIC_WEAK (since glibc 2.1.91)
              By default, when searching shared libraries to resolve a symbol reference, the dynamic linker will resolve to the first definition it finds.

              Old glibc versions (before 2.2), provided a different behavior: if the linker found a symbol that was weak, it would remember that symbol and keep search‐
              ing  in  the remaining shared libraries.  If it subsequently found a strong definition of the same symbol, then it would instead use that definition.  (If
              no further symbol was found, then the dynamic linker would use the weak symbol that it initially found.)

              The old glibc behavior was nonstandard.  (Standard practice is that the distinction between weak and strong symbols should have effect only at static link
              time.)   In glibc 2.2, the dynamic linker was modified to provide the current behavior (which was the behavior that was provided by most other implementa‐
              tions at that time).

              Defining the LD_DYNAMIC_WEAK environment variable (with any value) provides the old (nonstandard) glibc behavior, whereby a weak symbol in one shared  li‐
              brary  may be overridden by a strong symbol subsequently discovered in another shared library.  (Note that even when this variable is set, a strong symbol
              in a shared library will not override a weak definition of the same symbol in the main program.)

              Since glibc 2.3.4, LD_DYNAMIC_WEAK is ignored in secure-execution mode.

       LD_HWCAP_MASK (since glibc 2.1)
              Mask for hardware capabilities.

       LD_ORIGIN_PATH (since glibc 2.1)
              Path where the binary is found.

              Since glibc 2.4, LD_ORIGIN_PATH is ignored in secure-execution mode.

       LD_POINTER_GUARD (glibc from 2.4 to 2.22)
              Set to 0 to disable pointer guarding.  Any other value enables pointer guarding, which is also the default.  Pointer  guarding  is  a  security  mechanism
              whereby some pointers to code stored in writable program memory (return addresses saved by setjmp(3) or function pointers used by various glibc internals)
              are mangled semi-randomly to make it more difficult for an attacker to hijack the pointers for use in the event of a buffer overrun or stack-smashing  at‐
              tack.  Since glibc 2.23, LD_POINTER_GUARD can no longer be used to disable pointer guarding, which is now always enabled.

       LD_PROFILE (since glibc 2.1)
              The  name of a (single) shared object to be profiled, specified either as a pathname or a soname.  Profiling output is appended to the file whose name is:
              "$LD_PROFILE_OUTPUT/$LD_PROFILE.profile".

              Since glibc 2.2.5, LD_PROFILE is ignored in secure-execution mode.

       LD_PROFILE_OUTPUT (since glibc 2.1)
              Directory where LD_PROFILE output should be written.  If this variable is not defined, or is defined as an empty string, then the default is /var/tmp.

              LD_PROFILE_OUTPUT is ignored in secure-execution mode; instead /var/profile is always used.  (This detail is relevant only before glibc  2.2.5,  since  in
              later glibc versions, LD_PROFILE is also ignored in secure-execution mode.)

       LD_SHOW_AUXV (since glibc 2.1)
              If this environment variable is defined (with any value), show the auxiliary array passed up from the kernel (see also getauxval(3)).

              Since glibc 2.3.4, LD_SHOW_AUXV is ignored in secure-execution mode.

       LD_TRACE_PRELINKING (since glibc 2.4)
              If this environment variable is defined, trace prelinking of the object whose name is assigned to this environment variable.  (Use ldd(1) to get a list of
              the objects that might be traced.)  If the object name is not recognized, then all prelinking activity is traced.

       LD_USE_LOAD_BIAS (since glibc 2.3.3)
              By default (i.e., if this variable is not defined), executables and prelinked shared objects will honor base addresses of their dependent  shared  objects
              and (nonprelinked) position-independent executables (PIEs) and other shared objects will not honor them.  If LD_USE_LOAD_BIAS is defined with the value 1,
              both executables and PIEs will honor the base addresses.  If LD_USE_LOAD_BIAS is defined with the value 0, neither executables nor  PIEs  will  honor  the
              base addresses.

              Since glibc 2.3.3, this variable is ignored in secure-execution mode.

       LD_VERBOSE (since glibc 2.1)
              If set to a nonempty string, output symbol versioning information about the program if the LD_TRACE_LOADED_OBJECTS environment variable has been set.

       LD_WARN (since glibc 2.1.3)
              If set to a nonempty string, warn about unresolved symbols.

       LD_PREFER_MAP_32BIT_EXEC (x86-64 only; since glibc 2.23)
              According  to the Intel Silvermont software optimization guide, for 64-bit applications, branch prediction performance can be negatively impacted when the
              target of a branch is more than 4 GB away from the branch.  If this environment variable is set (to any value), the dynamic linker will first try  to  map
              executable  pages  using  the mmap(2) MAP_32BIT flag, and fall back to mapping without that flag if that attempt fails.  NB: MAP_32BIT will map to the low
              2 GB (not 4 GB) of the address space.

              Because MAP_32BIT reduces the address range available for address space layout randomization (ASLR), LD_PREFER_MAP_32BIT_EXEC is always  disabled  in  se‐
              cure-execution mode.

FILES
       /lib/ld.so
              a.out dynamic linker/loader

       /lib/ld-linux.so.{1,2}
              ELF dynamic linker/loader

       /etc/ld.so.cache
              File containing a compiled list of directories in which to search for shared objects and an ordered list of candidate shared objects.  See ldconfig(8).

       /etc/ld.so.preload
              File  containing  a  whitespace-separated  list  of  ELF shared objects to be loaded before the program.  See the discussion of LD_PRELOAD above.  If both
              LD_PRELOAD and /etc/ld.so.preload are employed, the libraries specified by LD_PRELOAD are preloaded first.  /etc/ld.so.preload has a  system-wide  effect,
              causing the specified libraries to be preloaded for all programs that are executed on the system.  (This is usually undesirable, and is typically employed
              only as an emergency remedy, for example, as a temporary workaround to a library misconfiguration issue.)

       lib*.so*
              shared objects

NOTES
   Hardware capabilities
       Some shared objects are compiled using hardware-specific instructions which do not exist on every CPU.  Such objects should be  installed  in  directories  whose
       names define the required hardware capabilities, such as /usr/lib/sse2/.  The dynamic linker checks these directories against the hardware of the machine and se‐
       lects the most suitable version of a given shared object.  Hardware capability directories can be cascaded to combine CPU features.  The list of supported  hard‐
       ware capability names depends on the CPU.  The following names are currently recognized:

       Alpha  ev4, ev5, ev56, ev6, ev67

       MIPS   loongson2e, loongson2f, octeon, octeon2

       PowerPC
              4xxmac,  altivec, arch_2_05, arch_2_06, booke, cellbe, dfp, efpdouble, efpsingle, fpu, ic_snoop, mmu, notb, pa6t, power4, power5, power5+, power6x, ppc32,
              ppc601, ppc64, smt, spe, ucache, vsx

       SPARC  flush, muldiv, stbar, swap, ultra3, v9, v9v, v9v2

       s390   dfp, eimm, esan3, etf3enh, g5, highgprs, hpage, ldisp, msa, stfle, z900, z990, z9-109, z10, zarch

       x86 (32-bit only)
              acpi, apic, clflush, cmov, cx8, dts, fxsr, ht, i386, i486, i586, i686, mca, mmx, mtrr, pat, pbe, pge, pn, pse36, sep, ss, sse, sse2, tm

SEE ALSO
       ld(1), ldd(1), pldd(1), sprof(1), dlopen(3), getauxval(3), elf(5), capabilities(7), rtld-audit(7), ldconfig(8), sln(8)

GNU                                                                            2021-08-27                                                                       LD.SO(8)