💾 Archived View for decend.xyz › 2022-05-26.gmi captured on 2022-07-16 at 13:30:06. Gemini links have been rewritten to link to archived content

-=-=-=-=-=-=-

Introduction

2022-05-26T12:59:16+02

Don't try to make sense of the automatic timestamps the system adds to my log. I am not aware of the correctness of these. Though I'm wondering how these shifts are possible.

I followed the wall down with one hand touching it. The material of it is wet and sturdy. It is also very smooth. I suspect because of little streams of water running down constantly. The wall came to an end in what's looking like an intersection of multiple paths. In the center, a large pillar is placed. I will set up my little research lab here, to analyse some of my findings.

Observation

LABRECEIVER redirecting output to destination log. Stand by...

00T0: [KERN] I, Quick boot nonverbose at 2124-01-24T15:33:08+00
00T1: [KERN] E, Can't synchronise clock, please set manually
00TA: [KERN] I, Quick boot nonverbose finished
04T5: [CONR] I, Receiving instruction data, redirecting to OPER
0DTF: [OPER] W, Input mangled. Starting simult. CRC recovery
A1T7: [CONR] I, Stream finished, redirection to OPER stopped
A5T8: [OPER] I, Input successfully received, executing instructions:
0000000 3030 412E 5249 2E59 4552 5643 352E 3030
0000010 2E30 4D53 3150 300A 2E31 4941 5952 492E
0000020 534E 2E50 4D53 3150 300A 2E32 5953 5453
0000030 532E 4F54 2E52 4D53 3150 300A 2E33 4C46
0000040 524F 522E 4345 2E56 3035 3030 532E 504D
0000050 0A32 3430 462E 4F4C 2E52 4E49 5053 532E
0000060 504D 0A32 3530 482E 4E41 2E44 4553 5250
0000070 532E 504D 2E32 4F54 532E 504D 5F32 5544
0000080 5453 300A 2E36 4C46 524F 442E 5355 2E54
0000090 4D53 3250 445F 5355 0A54 3730 532E 5359
00000A0 2E54 5453 524F 532E 504D 0A32 3830 532E
00000B0 5359 2E54 5453 524F 532E 504D 5F32 5544
00000C0 5453 300A 2E39 4145 5352 522E 4345 2E56
00000D0 3035 3030 532E 504D 0A33 4130 452E 5241
00000E0 2E53 4E49 5053 532E 504D 0A33 4230 482E
00000F0 4E41 2E44 4F43 5950 532E 504D 2E33 4F54
0000100 532E 504D 5F33 4F4C 4455 300A 2E43 4145
0000110 5352 4C2E 554F 2E44 4D53 3350 4C5F 554F
0000120 0A44 4430 532E 5359 2E54 5453 524F 532E
0000130 504D 0A33 4530 532E 5359 2E54 5453 524F
0000140 532E 504D 5F33 4F4C 4455 000A          
A6T1: [OPER] I, Starting subprocess AIRY
A9T2: [OPER] I, Storing SMP1 (140 units left)
ADT9: [OPER] I, Starting subprocess FLOR
C4TB: [OPER] E, FLOR.DUST malfunction (check laser diodes)
C4TC: [OPER] W, FLOR.DUST maintenance needed, continuing
C4TD: [OPER] I, Storing SMP2 (139 units left)
CET2: [OPER] W, Storing SMP2_DUST (1Axxxx units left)
CDT4: [DISK] E, Performing rollback to snapshot C4TD
CDTF: [DISK] W, Inserting LEAVE at malfunctioning instruction entry
CET0: [OPER] I, Starting subprocess EARS
D3T5: [OPER] I, Storing SMP3 (138 units left)
D6T1: [OPER] I, Storing SMP3_LOUD (137 units left)
D6TA: [OPER] I, Execution of input stream finished
D6TB: [KERN] I, Received shutdown signal

This little machine is somewhat rusted. These errors shown while processing and cutting (or dusting) the rocks on the ground is clearly a sign, that something is wrong with the material or the instrument as a whole. Although I'm in doubt, I hope it's the material, that is somewhat too hard to handle for the little lasers. I'll try to have a look at it later on my journey.

Nothing surprising concerning the samples I've taken from the air probe. Very wet. Not my desired humidity, I'd like to annotate. The sound samples are interesting. Especially the one that got amped up. There is a clear continous beating noticable. It is subliminal in the audio sample, but definitely noticable.

Conclusion

I'm feeling watched. My station is already packed and I'm heading towards the path, where the beating sound should originate from.

Almost forgot: Placed a beacon in front of the pillar. Looking good.