💾 Archived View for gemini.spam.works › mirrors › textfiles › phreak › BOXES › bxsilver.txt captured on 2022-06-12 at 17:16:03.
-=-=-=-=-=-=-
How To Build a Silver Box
-------------------------
tools and materials : soldering iron, solder, some 22 ga. wire, a spdt
switch, and a screwdriver.
(1) unscrew your phone (must be a touch
tone, desk type)
(2) remove the mounted pad and take the
clear plastic cover from the bottom.
(3) hold the pad with the numbers 0, *,
# facing you, and turn it upside down,
so you can see the yellow pc board.
(4) you should see 2 black round
doughnuts.
(5) position the board so the solder
points for the left doughnut face you.
(6) count over four points from the
left, and attach a (green) wire to that
point.
(7) between you and the doughnuts,
there should be 2 long yellow
capacitors. to the right of these, and
on the edge of the board there should
be 3 gold contacts. we will use the one
on the left.
(8) the contact originally is spot
welded, so snip it open.
(9) to the one nearest you, attach a
wires out of the phone,
and solder the switch.
(11) the orientation should be (red) to
center. the switch will now alternate
between normal and 1633hz fourth
column tones.
---------------------------------------
Silver Box Documentation
(contributed by lex luthor)
the silver box transforms keys 3,6,9,# to a,b,c,d. those tones stand for:
"a"-flash
"b"-flash override (priority)
"c"-priority communication
"d"-priority overide (top military)
those keys only work on certain networks. Now what do you do with those
extra tones???
call any long distance directory by dialing (area code) 555-1212 and while
it rings press the # key then as the operator answers you will disconnect
them instantly and hear a pulsing tone, press 6(normal tone) and it will
stop.then if another person does the same thing on another line and then
presses 7 you should have a voice link, area code 414 is good for one that
you can screw around with the tones and see what you get.