đŸ Archived View for gmi.noulin.net âș man âș man7 âș time.7.gmi captured on 2022-06-12 at 07:47:03. Gemini links have been rewritten to link to archived content
-=-=-=-=-=-=-
TIME(7) Linux Programmer's Manual TIME(7)
NAME
time - overview of time and timers
DESCRIPTION
Real time and process time
Real time is defined as time measured from some fixed point, either from a standard point in the past (see the description of the Epoch and calendar time below),
or from some point (e.g., the start) in the life of a process (elapsed time).
Process time is defined as the amount of CPU time used by a process. This is sometimes divided into user and system components. User CPU time is the time spent
executing code in user mode. System CPU time is the time spent by the kernel executing in system mode on behalf of the process (e.g., executing system calls).
The time(1) command can be used to determine the amount of CPU time consumed during the execution of a program. A program can determine the amount of CPU time
it has consumed using times(2), getrusage(2), or clock(3).
The hardware clock
Most computers have a (battery-powered) hardware clock which the kernel reads at boot time in order to initialize the software clock. For further details, see
rtc(4) and hwclock(8).
The software clock, HZ, and jiffies
The accuracy of various system calls that set timeouts, (e.g., select(2), sigtimedwait(2)) and measure CPU time (e.g., getrusage(2)) is limited by the resolution
of the software clock, a clock maintained by the kernel which measures time in jiffies. The size of a jiffy is determined by the value of the kernel constant
HZ.
The value of HZ varies across kernel versions and hardware platforms. On i386 the situation is as follows: on kernels up to and including 2.4.x, HZ was 100,
giving a jiffy value of 0.01 seconds; starting with 2.6.0, HZ was raised to 1000, giving a jiffy of 0.001 seconds. Since kernel 2.6.13, the HZ value is a kernel
configuration parameter and can be 100, 250 (the default) or 1000, yielding a jiffies value of, respectively, 0.01, 0.004, or 0.001 seconds. Since kernel
2.6.20, a further frequency is available: 300, a number that divides evenly for the common video frame rates (PAL, 25 HZ; NTSC, 30 HZ).
The times(2) system call is a special case. It reports times with a granularity defined by the kernel constant USER_HZ. User-space applications can determine
the value of this constant using sysconf(_SC_CLK_TCK).
System and process clocks; time namespaces
The kernel supports a range of clocks that measure various kinds of elapsed and virtual (i.e., consumed CPU) time. These clocks are described in clock_getâ
time(2). A few of the clocks are settable using clock_settime(2). The values of certain clocks are virtualized by time namespaces; see time_namespaces(7).
High-resolution timers
Before Linux 2.6.21, the accuracy of timer and sleep system calls (see below) was also limited by the size of the jiffy.
Since Linux 2.6.21, Linux supports high-resolution timers (HRTs), optionally configurable via CONFIG_HIGH_RES_TIMERS. On a system that supports HRTs, the accuâ
racy of sleep and timer system calls is no longer constrained by the jiffy, but instead can be as accurate as the hardware allows (microsecond accuracy is typiâ
cal of modern hardware). You can determine whether high-resolution timers are supported by checking the resolution returned by a call to clock_getres(2) or
looking at the "resolution" entries in /proc/timer_list.
HRTs are not supported on all hardware architectures. (Support is provided on x86, arm, and powerpc, among others.)
The Epoch
UNIX systems represent time in seconds since the Epoch, 1970-01-01 00:00:00 +0000 (UTC).
A program can determine the calendar time via the clock_gettime(2) CLOCK_REALTIME clock, which returns time (in seconds and nanoseconds) that have elapsed since
the Epoch; time(2) provides similar information, but only with accuracy to the nearest second. The system time can be changed using clock_settime(2).
Broken-down time
Certain library functions use a structure of type tm to represent broken-down time, which stores time value separated out into distinct components (year, month,
day, hour, minute, second, etc.). This structure is described in ctime(3), which also describes functions that convert between calendar time and broken-down
time. Functions for converting between broken-down time and printable string representations of the time are described in ctime(3), strftime(3), and strpâ
time(3).
Sleeping and setting timers
Various system calls and functions allow a program to sleep (suspend execution) for a specified period of time; see nanosleep(2), clock_nanosleep(2), and
sleep(3).
Various system calls allow a process to set a timer that expires at some point in the future, and optionally at repeated intervals; see alarm(2), getitimer(2),
timerfd_create(2), and timer_create(2).
Timer slack
Since Linux 2.6.28, it is possible to control the "timer slack" value for a thread. The timer slack is the length of time by which the kernel may delay the
wake-up of certain system calls that block with a timeout. Permitting this delay allows the kernel to coalesce wake-up events, thus possibly reducing the number
of system wake-ups and saving power. For more details, see the description of PR_SET_TIMERSLACK in prctl(2).
SEE ALSO
date(1), time(1), timeout(1), adjtimex(2), alarm(2), clock_gettime(2), clock_nanosleep(2), getitimer(2), getrlimit(2), getrusage(2), gettimeofday(2),
nanosleep(2), stat(2), time(2), timer_create(2), timerfd_create(2), times(2), utime(2), adjtime(3), clock(3), clock_getcpuclockid(3), ctime(3), ntp_adjtime(3),
ntp_gettime(3), pthread_getcpuclockid(3), sleep(3), strftime(3), strptime(3), timeradd(3), usleep(3), rtc(4), time_namespaces(7), hwclock(8)
Linux 2020-04-11 TIME(7)