💾 Archived View for gmi.noulin.net › mobileNews › 2547.gmi captured on 2022-06-11 at 23:42:03. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2021-12-03)
-=-=-=-=-=-=-
4 November 2010 Last updated at 08:07 GMT
By Jonathan Amos Science correspondent, BBC News
STREAMING HOLOGRAPHIC IMAGES IN NEAR-REALTIME
Graphic of system (BBC)
series of cameras arranged in an arc or circle
conceivably be sent anywhere in the world
the laser that writes the images on to the screen
needed to illuminate the changing holograms
It has long been a staple of science fiction films - the idea that you could
send a moving 3D representation of someone to any location, even on another
continent.
Start Quote
Imagine a very complicated surgical procedure - then with this system surgeons
around the world could participate
End Quote Nasser Peyghambarian University of Arizona
Now, US researchers claim this fantasy is very close to reality.
A University of Arizona team says it has devised a system that can make a
holographic display appear in another place and update it in near real-time.
The group tells the journal Nature that the development has huge potential.
"We foresee many applications, for example in manufacturing," said Professor
Nasser Peyghambarian from Arizona's College of Optical Sciences.
"Car manufacturers or airplane manufacturers could look at holograms and design
their systems in real time. They could look at 3D models and make changes as
they go.
"Imagine a very complicated surgical procedure - then with this system surgeons
around the world could participate. They could see the whole procedure in
real-time and in 3D, and help out," he told BBC News.
Quick draw
Ever since the Princess Leia character was magically projected in 3D during the
original Star Wars film, people have wondered if such a technology might really
be possible.
The system demonstrated this week is far from the finished product, but it
gives a very strong hint of what might be achievable with further refinements.
At its heart is a new plastic screen material that will record 3D holographic
images time and time again, every two seconds.
A demonstration of the speed printing
In the set up described in Nature, 16 cameras recorded 2D images of objects and
people from multiple angles, and then sent that information to another location
using a computer connection.
At the remote site, a laser was used to "print" the visual information on to
the new photosensitive polymer. The 3D image composed of the 16 perspectives
decays naturally, but the laser can write the next "frame" before it completely
disappears.
The team previously gave an update on its work in a 2008 Nature paper. Back
then, its 10cm-by-10cm, one-colour screen could only be updated every four
minutes.
The new 45cm-by-45cm, multi-colour screen is re-written in a hundredth of the
time.
No glasses are needed to see the images, merely some form of illumination.
And unlike "standard 3D" TV or films that produce a simple parallax effect in
which each eye is offered one slightly different perspective on the same
object, the scope of the holographic images is built from the many views of
numerous cameras.
Challenges ahead
Theoretically, say the researchers, it should be possible to project a full
360-degree hologram, one where an individual standing on one side of the screen
sees the front of a printed object while someone standing on the other side of
the screen sees its rear.
So while it is not quite Princess Leia being projected in free space, the
system could conceivably produce a very rounded telepresence.
The team concedes its prototype system has a lot of development ahead of it,
but the researchers believe the first commercial products could be available in
a few years' time.
The polymer will update rapidly
One key advance needed is the ability to re-print the polymer at least 30 times
a second. This would give a much more realistic sense of movement. The screen
itself needs to be made much bigger and additional cameras would have to be
incorporated to provide more detail and at significantly higher resolutions.
And all this would have large processing and bandwidth implications which would
likely limit the system's use to high-end applications - certainly in the early
stages of commercialisation.
"Coming up with improvements to the polymer is going to take some time, and
also coming up with better lasers is going to take some time. In about two to
three years, we should be able to do those aspects," said Professor
Peyghambarian.
"And then transferring that into a product is going to take another three to
four years. But I don't believe there is any physics that would prevent us from
getting there."