💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc7670.txt captured on 2022-06-11 at 21:58:12.

View Raw

More Information

⬅️ Previous capture (2021-11-30)

-=-=-=-=-=-=-







Internet Engineering Task Force (IETF)                        T. Kivinen
Request for Comments: 7670                                 INSIDE Secure
Updates: 7296                                                 P. Wouters
Category: Standards Track                                        Red Hat
ISSN: 2070-1721                                            H. Tschofenig
                                                            January 2016


                Generic Raw Public-Key Support for IKEv2

Abstract

   The Internet Key Exchange Version 2 (IKEv2) protocol did have support
   for raw public keys, but it only supported RSA raw public keys.  In
   constrained environments, it is useful to make use of other types of
   public keys, such as those based on Elliptic Curve Cryptography.
   This document updates RFC 7296, adding support for other types of raw
   public keys to IKEv2.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc7670.

Copyright Notice

   Copyright (c) 2016 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.




Kivinen, et al.              Standards Track                    [Page 1]

RFC 7670        Generic Raw Public-Key Support for IKEv2    January 2016


Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   3
   3.  Certificate Encoding Payload  . . . . . . . . . . . . . . . .   3
   4.  Security Considerations . . . . . . . . . . . . . . . . . . .   4
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   5
   6.  References  . . . . . . . . . . . . . . . . . . . . . . . . .   5
     6.1.  Normative References  . . . . . . . . . . . . . . . . . .   5
     6.2.  Informative References  . . . . . . . . . . . . . . . . .   5
   Appendix A.  Examples . . . . . . . . . . . . . . . . . . . . . .   7
     A.1.  ECDSA Example . . . . . . . . . . . . . . . . . . . . . .   7
     A.2.  RSA Example . . . . . . . . . . . . . . . . . . . . . . .   8
   Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . .  10
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  10

1.  Introduction

   This document replaces an algorithm-specific version of raw public
   keys of the Internet Key Exchange Version 2 (IKEv2) [RFC7296] with a
   generic version of raw public keys that is algorithm agnostic.

   In [RFC5996], IKEv2 had support for PKCS #1 encoded RSA keys, i.e., a
   DER-encoded RSAPublicKey structure (see [RSA] and [RFC3447]).  Other
   raw public-key types are, however, not supported.  In [RFC7296], this
   feature was removed; this document reintroduces support for raw
   public keys to IKEv2 in a more generic way.

   DNSSEC allows public keys to be associated with domain names for
   usage with security protocols like IKEv2 and Transport Layer Security
   (TLS) [RFC5246] but it relies on extensions in those protocols to be
   specified.

   The Raw Public Keys in Transport Layer Security specification
   ([RFC7250]) adds generic support for raw public keys to TLS by
   reusing the SubjectPublicKeyInfo format from the X.509 Public-Key
   Infrastructure Certificate profile [RFC5280].

   This document is similar to the Raw Public Keys in Transport Layer
   Security specification and applies the concept to IKEv2 to support
   all public-key formats defined by PKIX.  This approach also allows
   future public-key extensions to be supported without the need to
   introduce further enhancements to IKEv2.








Kivinen, et al.              Standards Track                    [Page 2]

RFC 7670        Generic Raw Public-Key Support for IKEv2    January 2016


   To support new types of public keys in IKEv2, the following changes
   are needed:

   o  A new Certificate Encoding format needs to be defined for carrying
      the SubjectPublicKeyInfo structure.  Section 3 specifies this new
      encoding format.

   o  A new Certificate Encoding that has been allocated by IANA.
      Section 5 contains the details about the IANA registration.

   The base IKEv2 specification includes support for RSA and DSA
   signatures, but the Signature Authentication in IKEv2 [RFC7427]
   extended IKEv2 so that signature methods over any key type can be
   used.  Implementations using raw public keys SHOULD use the Digital
   Signature method described in RFC 7427.

   When using raw public keys, the authenticated identity is not usually
   the identity from the ID payload, but instead the public key itself
   is used as the identity for the other end.  This means that ID
   payload contents might not be useful for authentication purposes.  It
   might still be used for policy decisions, for example to simplify the
   policy lookup.  Alternatively, the ID_NULL type [RFC7619] can be used
   to indicate that the ID payload is not relevant to this
   authentication.

2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

3.  Certificate Encoding Payload

   Section 3.6 of RFC 7296 defines the Certificate payload format as
   shown in Figure 1.

                        1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   | Next Payload  |C|  RESERVED   |         Payload Length        |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   | Cert Encoding |                                               |
   +-+-+-+-+-+-+-+-+                                               |
   ~                       Certificate Data                        ~
   |                                                               |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

                   Figure 1: Certificate Payload Format



Kivinen, et al.              Standards Track                    [Page 3]

RFC 7670        Generic Raw Public-Key Support for IKEv2    January 2016


   To support raw public keys, the field values are as follows:

   o  Certificate Encoding (1 octet) - This field indicates the type of
      certificate or certificate-related information contained in the
      Certificate Data field.

      Certificate Encoding                 Value
      ----------------------------------------------------
      Raw Public Key                       15

   o  Certificate Data (variable length) - Actual encoding of the
      certificate data.

   In order to provide a simple and standard way to indicate the key
   type when the encoding type is "Raw Public Key", the
   SubjectPublicKeyInfo structure of the PKIX certificate is used.  This
   is a very simple encoding, as most of the ASN.1 part can be included
   literally and recognized by block comparison.  See Appendix A of
   [RFC7250] for a detailed breakdown.  In addition, Appendix A of this
   document has several examples.

   In addition to the Certificate payload, the Cert Encoding for Raw
   Public Key can be used in the Certificate Request payload.  In that
   case, the Certification Authority field MUST be empty if the "Raw
   Public Key" certificate encoding is used.

   For RSA keys, the implementations MUST follow the public-key
   processing rules of Section 1.2 of the Additional Algorithms and
   Identifiers for RSA Cryptography for PKIX ([RFC4055]) even when the
   SubjectPublicKeyInfo is not part of a certificate but is instead sent
   as a Certificate Data field.  This means that RSASSA-PSS and
   RSASSA-PSS-params inside the SubjectPublicKeyInfo structure MUST be
   sent when applicable.

4.  Security Considerations

   An IKEv2 deployment using raw public keys needs to utilize an out-of-
   band public-key validation procedure to be confident in the
   authenticity of the keys being used.  One way to achieve this goal is
   to use a configuration mechanism for provisioning raw public keys
   into the IKEv2 software.  "Smart object" deployments are likely to
   use such preconfigured public keys.

   Another approach is to rely on secure DNS to associate public keys
   with domain names using the IPSECKEY DNS RRtype [RFC4025].  More
   information can be found in DNS-Based Authentication of Named
   Entities (DANE) [RFC6394].




Kivinen, et al.              Standards Track                    [Page 4]

RFC 7670        Generic Raw Public-Key Support for IKEv2    January 2016


   This document does not change the security assumptions made by the
   IKEv2 specification since "Raw RSA Key" support was already available
   in IKEv2 in [RFC5996].  This document only generalizes raw public-key
   support.

5.  IANA Considerations

   This document allocates a new value from the IKEv2 Certificate
   Encodings registry:

   15      Raw Public Key

6.  References

6.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <http://www.rfc-editor.org/info/rfc2119>.

   [RFC5280]  Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
              Housley, R., and W. Polk, "Internet X.509 Public Key
              Infrastructure Certificate and Certificate Revocation List
              (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008,
              <http://www.rfc-editor.org/info/rfc5280>.

   [RFC7296]  Kaufman, C., Hoffman, P., Nir, Y., Eronen, P., and T.
              Kivinen, "Internet Key Exchange Protocol Version 2
              (IKEv2)", STD 79, RFC 7296, DOI 10.17487/RFC7296, October
              2014, <http://www.rfc-editor.org/info/rfc7296>.

   [RFC7427]  Kivinen, T. and J. Snyder, "Signature Authentication in
              the Internet Key Exchange Version 2 (IKEv2)", RFC 7427,
              DOI 10.17487/RFC7427, January 2015,
              <http://www.rfc-editor.org/info/rfc7427>.

   [RFC7619]  Smyslov, V. and P. Wouters, "The NULL Authentication
              Method in the Internet Key Exchange Protocol Version 2
              (IKEv2)", RFC 7619, DOI 10.17487/RFC7619, August 2015,
              <http://www.rfc-editor.org/info/rfc7619>.

6.2.  Informative References

   [RFC3447]  Jonsson, J. and B. Kaliski, "Public-Key Cryptography
              Standards (PKCS) #1: RSA Cryptography Specifications
              Version 2.1", RFC 3447, DOI 10.17487/RFC3447, February
              2003, <http://www.rfc-editor.org/info/rfc3447>.



Kivinen, et al.              Standards Track                    [Page 5]

RFC 7670        Generic Raw Public-Key Support for IKEv2    January 2016


   [RFC4025]  Richardson, M., "A Method for Storing IPsec Keying
              Material in DNS", RFC 4025, DOI 10.17487/RFC4025, March
              2005, <http://www.rfc-editor.org/info/rfc4025>.

   [RFC4055]  Schaad, J., Kaliski, B., and R. Housley, "Additional
              Algorithms and Identifiers for RSA Cryptography for use in
              the Internet X.509 Public Key Infrastructure Certificate
              and Certificate Revocation List (CRL) Profile", RFC 4055,
              DOI 10.17487/RFC4055, June 2005,
              <http://www.rfc-editor.org/info/rfc4055>.

   [RFC4754]  Fu, D. and J. Solinas, "IKE and IKEv2 Authentication Using
              the Elliptic Curve Digital Signature Algorithm (ECDSA)",
              RFC 4754, DOI 10.17487/RFC4754, January 2007,
              <http://www.rfc-editor.org/info/rfc4754>.

   [RFC5246]  Dierks, T. and E. Rescorla, "The Transport Layer Security
              (TLS) Protocol Version 1.2", RFC 5246,
              DOI 10.17487/RFC5246, August 2008,
              <http://www.rfc-editor.org/info/rfc5246>.

   [RFC5480]  Turner, S., Brown, D., Yiu, K., Housley, R., and T. Polk,
              "Elliptic Curve Cryptography Subject Public Key
              Information", RFC 5480, DOI 10.17487/RFC5480, March 2009,
              <http://www.rfc-editor.org/info/rfc5480>.

   [RFC5996]  Kaufman, C., Hoffman, P., Nir, Y., and P. Eronen,
              "Internet Key Exchange Protocol Version 2 (IKEv2)",
              RFC 5996, DOI 10.17487/RFC5996, September 2010,
              <http://www.rfc-editor.org/info/rfc5996>.

   [RFC6394]  Barnes, R., "Use Cases and Requirements for DNS-Based
              Authentication of Named Entities (DANE)", RFC 6394,
              DOI 10.17487/RFC6394, October 2011,
              <http://www.rfc-editor.org/info/rfc6394>.

   [RFC7250]  Wouters, P., Ed., Tschofenig, H., Ed., Gilmore, J.,
              Weiler, S., and T. Kivinen, "Using Raw Public Keys in
              Transport Layer Security (TLS) and Datagram Transport
              Layer Security (DTLS)", RFC 7250, DOI 10.17487/RFC7250,
              June 2014, <http://www.rfc-editor.org/info/rfc7250>.

   [RSA]      Rivest, R., Shamir, A., and L. Adleman, "A Method for
              Obtaining Digital Signatures and Public-Key
              Cryptosystems", February 1978.






Kivinen, et al.              Standards Track                    [Page 6]

RFC 7670        Generic Raw Public-Key Support for IKEv2    January 2016


Appendix A.  Examples

   This appendix provides examples of the actual payloads sent on the
   wire.

A.1.  ECDSA Example

   This first example uses the 256-bit ECDSA private/public key pair
   defined in Section 8.1 of the IKEv2 ECDSA document [RFC4754].

   The public key is as follows:

   o  Algorithm: id-ecPublicKey (1.2.840.10045.2.1)

   o  Fixed curve: secp256r1 (1.2.840.10045.3.1.7)

   o  Public key x coordinate:

      cb28e099 9b9c7715 fd0a80d8 e47a7707
      9716cbbf 917dd72e 97566ea1 c066957c

   o  Public key y coordinate:

      2b57c023 5fb74897 68d058ff 4911c20f
      dbe71e36 99d91339 afbb903e e17255dc

   The SubjectPublicKeyInfo ASN.1 object is as follows:

   0000 :     SEQUENCE
   0002 :       SEQUENCE
   0004 :         OBJECT IDENTIFIER  id-ecPublicKey (1.2.840.10045.2.1)
   000d :         OBJECT IDENTIFIER  secp256r1 (1.2.840.10045.3.1.7)
   0017 :       BIT STRING  (66 bytes)
   00000000: 0004 cb28 e099 9b9c 7715 fd0a 80d8 e47a
   00000010: 7707 9716 cbbf 917d d72e 9756 6ea1 c066
   00000020: 957c 2b57 c023 5fb7 4897 68d0 58ff 4911
   00000030: c20f dbe7 1e36 99d9 1339 afbb 903e e172
   00000040: 55dc

   The first byte (00) of the bit string indicates that there is no
   "number of unused bits", and the second byte (04) indicates
   uncompressed form ([RFC5480]).  Those two octets are followed by the
   values of X and Y.








Kivinen, et al.              Standards Track                    [Page 7]

RFC 7670        Generic Raw Public-Key Support for IKEv2    January 2016


   The final encoded SubjectPublicKeyInfo object is as follows:

   00000000: 3059 3013 0607 2a86 48ce 3d02 0106 082a
   00000010: 8648 ce3d 0301 0703 4200 04cb 28e0 999b
   00000020: 9c77 15fd 0a80 d8e4 7a77 0797 16cb bf91
   00000030: 7dd7 2e97 566e a1c0 6695 7c2b 57c0 235f
   00000040: b748 9768 d058 ff49 11c2 0fdb e71e 3699
   00000050: d913 39af bb90 3ee1 7255 dc

   This will result in the final IKEv2 Certificate Payload:

   00000000: NN00 0060 0f30 5930 1306 072a 8648 ce3d
   00000010: 0201 0608 2a86 48ce 3d03 0107 0342 0004
   00000020: cb28 e099 9b9c 7715 fd0a 80d8 e47a 7707
   00000030: 9716 cbbf 917d d72e 9756 6ea1 c066 957c
   00000040: 2b57 c023 5fb7 4897 68d0 58ff 4911 c20f
   00000050: dbe7 1e36 99d9 1339 afbb 903e e172 55dc

   Where NN is the next payload type (i.e., the type of payload that
   immediately follows this Certificate payload).

A.2.  RSA Example

   This second example uses a random 1024-bit RSA key.

   The public key is as follows:

   o  Algorithm: rsaEncryption (1.2.840.113549.1.1.1)

   o  Modulus n (1024 bits, decimal):

      1323562071162740912417075551025599045700
      3972512968992059076067098474693867078469
      7654066339302927451756327389839253751712
      9485277759962777278073526290329821841100
      9721044682579432931952695408402169276996
      5181887843758615443536914372816830537901
      8976615344413864477626646564638249672329
      04996914356093900776754835411

   o  Modulus n (1024 bits, hexadecimal):

      bc7b4347 49c7b386 00bfa84b 44f88187 9a2dda08 d1f0145a
      f5806c2a ed6a6172 ff0dc3d4 cd601638 e8ca348e bdca5742
      31cadc97 12e209b1 fddba58a 8c62b369 038a3d1e aa727c1f
      39ae49ed 6ebc30f8 d9b52e23 385a4019 15858c59 be72f343
      fb1eb87b 16ffc5ab 0f8f8fe9 f7cb3e66 3d8fe9f9 ecfa1230
      66f36835 8ceaefd3



Kivinen, et al.              Standards Track                    [Page 8]

RFC 7670        Generic Raw Public-Key Support for IKEv2    January 2016


   o  Exponent e (17 bits, decimal): 65537

   o  Exponent e (17 bits, hexadecimal): 10001

   The SubjectPublicKeyInfo ASN.1 object is as follows:

   0000 :     SEQUENCE
   0003 :       SEQUENCE
   0005 :         OBJECT IDENTIFIER rsaEncryption (1.2.840.113549.1.1.1)
   0016 :         NULL
   0018 :       BIT STRING  (141 bytes)
   00000000: 0030 8189 0281 8100 bc7b 4347 49c7 b386
   00000010: 00bf a84b 44f8 8187 9a2d da08 d1f0 145a
   00000020: f580 6c2a ed6a 6172 ff0d c3d4 cd60 1638
   00000030: e8ca 348e bdca 5742 31ca dc97 12e2 09b1
   00000040: fddb a58a 8c62 b369 038a 3d1e aa72 7c1f
   00000050: 39ae 49ed 6ebc 30f8 d9b5 2e23 385a 4019
   00000060: 1585 8c59 be72 f343 fb1e b87b 16ff c5ab
   00000070: 0f8f 8fe9 f7cb 3e66 3d8f e9f9 ecfa 1230
   00000080: 66f3 6835 8cea efd3 0203 0100 01

   The first byte (00) of the bit string indicates that there is no
   "number of unused bits".  Inside that bit string, there is an ASN.1
   sequence having 2 integers.  The second byte (30) indicates that this
   is the beginning of the sequence, and the next byte (81) indicates
   the length does not fit in 7 bits, but requires one byte, so the
   length is in the next byte (89).  Then starts the first integer with
   tag (02) and length (81 81).  After that we have the modulus
   (prefixed with 0 so it will not be a negative number).  After the
   modulus, there follows the tag (02) and length (03) of the exponent,
   and the last 3 bytes are the exponent.

   The final encoded SubjectPublicKeyInfo object is as follows:

   00000000: 3081 9f30 0d06 092a 8648 86f7 0d01 0101
   00000010: 0500 0381 8d00 3081 8902 8181 00bc 7b43
   00000020: 4749 c7b3 8600 bfa8 4b44 f881 879a 2dda
   00000030: 08d1 f014 5af5 806c 2aed 6a61 72ff 0dc3
   00000040: d4cd 6016 38e8 ca34 8ebd ca57 4231 cadc
   00000050: 9712 e209 b1fd dba5 8a8c 62b3 6903 8a3d
   00000060: 1eaa 727c 1f39 ae49 ed6e bc30 f8d9 b52e
   00000070: 2338 5a40 1915 858c 59be 72f3 43fb 1eb8
   00000080: 7b16 ffc5 ab0f 8f8f e9f7 cb3e 663d 8fe9
   00000090: f9ec fa12 3066 f368 358c eaef d302 0301
   000000a0: 0001






Kivinen, et al.              Standards Track                    [Page 9]

RFC 7670        Generic Raw Public-Key Support for IKEv2    January 2016


   This will result in the final IKEv2 Certificate Payload:

   00000000: NN00 00a7 0f30 819f 300d 0609 2a86 4886
   00000010: f70d 0101 0105 0003 818d 0030 8189 0281
   00000020: 8100 bc7b 4347 49c7 b386 00bf a84b 44f8
   00000030: 8187 9a2d da08 d1f0 145a f580 6c2a ed6a
   00000040: 6172 ff0d c3d4 cd60 1638 e8ca 348e bdca
   00000050: 5742 31ca dc97 12e2 09b1 fddb a58a 8c62
   00000060: b369 038a 3d1e aa72 7c1f 39ae 49ed 6ebc
   00000070: 30f8 d9b5 2e23 385a 4019 1585 8c59 be72
   00000080: f343 fb1e b87b 16ff c5ab 0f8f 8fe9 f7cb
   00000090: 3e66 3d8f e9f9 ecfa 1230 66f3 6835 8cea
   000000a0: efd3 0203 0100 01

   Where NN is the next payload type (i.e., the type of the payload that
   immediately follows this Certificate payload).

Acknowledgements

   This document reproduces some parts of the similar TLS document
   ([RFC7250]).

Authors' Addresses

   Tero Kivinen
   INSIDE Secure
   Eerikinkatu 28
   Helsinki  FI-00180
   Finland

   Email: kivinen@iki.fi


   Paul Wouters
   Red Hat

   Email: pwouters@redhat.com


   Hannes Tschofenig

   Email: Hannes.Tschofenig@gmx.net
   URI:   http://www.tschofenig.priv.at








Kivinen, et al.              Standards Track                   [Page 10]