💾 Archived View for gemini.spam.works › mirrors › textfiles › phreak › CELLULAR › nokiam10tc2000.txt captured on 2022-06-12 at 17:29:41.
-=-=-=-=-=-=-
NOKIA M10, TC2000
NOTES: This is a single NAM unit.
The ESN prefix is 165 decimal & A5 hex.
Nokia: 813-536-5553
NAM PROGRAMING:
1. Turn power on.
2. Enter * 1 7 * 3 0 0 1 * L L L L *, where LLLL is the lock code, the
factory default is 1234. If the lock code is not known and can't be
guessed the phone can not be programed without a Nokia service handset.
3. Press SEL to store data and scroll between parameter names and values.
4. Press CLR to correct an entry.
5. Press END to abort programing.
6. At any time press SEL END to exit and complete programing, the phone
will also automatically exit if you scroll through all parameters.
PROGRAMING DATA
STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
01 00000 - 32767 HO-Id SYSTEM ID
02 0 OR 1 ACCESS ACCESS METHOD (MIN MARK)
03 0 OR 1 LOCAL LOCAL USE MARK
04 10 DIGITS Phone N MIN (AREA CODE & TEL#)
05 08 ONLY CLASS STATION CLASS MARK
06 333 OR 334 PAGE ch INITIAL PAGING CHANNEL
07 2 DIGITS O-LOAd ACCESS OVERLOAD CLASS
08 2 DIGITS GrouP GROUP ID (10 IN USA)
09 4 DIGITS Loc CodE LOCK CODE
NOTE: It is suggested that the lock code be either left at 1234, or
the last four digits of the phone number.
LOCK: SEL LCK. UNLOCK: Enter four digit code.
SYSTEM SELECT: SEL 1 then 1 to scroll: A = A only, b = B only, S = Pref/non
pref, H = Home only.