💾 Archived View for gemini.spam.works › mirrors › textfiles › phreak › CELLULAR › a_vox02.txt captured on 2022-06-12 at 17:25:09.
-=-=-=-=-=-=-
AUDIOVOX CTX1500, 2500, 4000, 5000, BC410, 55, SP85, TRANS 410.
NOTES: These are single NAM units.
The ESN prefix is 138 decimal, 8A hex (Toshiba)
You MUST know the lock code to program this unit, see below for
"back door" programing methods.
Audiovox: 516-231-6051/213-926-7758
NAM programing:
1. With the power turned on enter N N N FUNC # 1, where NNN is the three
digit lock code. The manufacturers default is 000
2. The # key increments the step number.
3. The * key decrements the step number.
4. STO enters the data for each step.
5. You MAY directly access any step by pressing RCL followed by the step
number.
6. FUNC SND completes programming.
7. FUNC CLR exits programming mode.
PROGRAMING DATA:
STEP# #OF DIGITS/RANGE DESCRIPTION
01 10 DIGITS MIN (AREA CODE & PHONE NUMBER)
02 3 DIGITS LOCK CODE
03 00000 - 99999 SYSTEM ID
04 00 - 15 ACCESS OVERLOAD CLASS
05 00 - 15 SYSTEM ID (10 FOR USA)
06 0 OR 1 LOCAL USE MARK
07 0 OR 1 MIN MARK
08 0333 OR 0334 INITIAL PAGING CHANNEL
09 0 OR 1 PREFERRED SYSTEM
10 4 DIGITS STATION CLASS MARK
11 8 BINARY DIGITS FUNCTION 1, SEE NOTE 1 BELOW
12 8 BINARY DIGITS FUNCTION 2, SEE NOTE 2 BELOW
13 00 TO 31 HOURS POWER OFF TIMER (CTX 4000 ONLY)
14 000 TO 255 SECS NO CHARGE AIR TIMER DELAY
15 3 DIGITS CALL TIMER RESET CODE
16 - 20 00000 - 99999 SIDH INHIBIT # 1 THRU # 5
21 - 25 NOT USED FUTURE USE
NOTES:
1. This is an eight digit binary field.
10000000 = CALL TIMER BEEP
01000000 = AUTO LOCK
00100000 = AUTO SYSTEM REDIAL
00010000 = CALL RESTRICTION
00001000 = 32 DIGIT DIALING CAPABILITY
11111000 = ALL OF THE ABOVE
2. As above but options are:
10000000 = HANDS FREE
01000000 = CONTINUOUS DTMF
00100000 = REPERTORY DIALING
00010000 = HORN ALERT
00001000 = ALLOWS 911 CALLING WHEN UNIT IS LOCKED
01101000 = ALL OF THE ABOVE
A/B SYSTEM SELECT:
FCN 0 4 DISPLAYS CURRENT MODE,
FCN 0 0 = PREFERRED/NON-PREFERRED,
FCN 0 1 = PREFERRED ONLY,
FCN 0 2 = HOME ONLY
FCN 0 3 = NON PREFERRED ONLY,
"BACK DOOR" PROCEDURES:
We cannot guarantee the accuracy of these procedures, USE CAUTION!
SP 85
The lock code can be reset to 000 be shorting pins 6 and 17 on the handset
control conector.
CTX SERIES
Short pins 6 an 17 on the data cable, turn power on and enter 000 FUNC # 1.
TRANS 55 AND BC 55
Ground pin 1 of the six pin connector next to the modular jack on the
tranceiver. Looking at the tranciever with the modular jack to the right
of the six pin connector, pin one is bottom right.
LOCK: Press LOCK. UNLOCK: Enter three digit code.
SYSTEM SELECT: F 0 4 shows current mode. F 0 0 = Pref/Non pref, F 0 1 = Pref
only, F 0 2 = Home Only, F 0 3 = Non pref only.