💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc8457.txt captured on 2022-06-04 at 00:04:23.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Internet Engineering Task Force (IETF) B. Leiba, Ed. Request for Comments: 8457 Huawei Technologies Category: Standards Track September 2018 ISSN: 2070-1721 IMAP "$Important" Keyword and "\Important" Special-Use Attribute Abstract RFC 6154 created an IMAP special-use LIST extension and defined an initial set of attributes. This document defines a new attribute, "\Important", and establishes a new IANA registry for IMAP folder attributes, which include the attributes defined in RFCs 5258, 3501, and 6154. This document also defines a new IMAP keyword, "$Important", and registers it in the registry defined in RFC 5788. Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc8457. Copyright Notice Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Leiba Standards Track [Page 1] RFC 8457 IMAP "Important" Keyword and Attribute September 2018 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1. Conventions Used in This Document . . . . . . . . . . . . . 3 2. Definition of the "$Important" Message Keyword . . . . . . . 3 3. Definition of the 'Important' Mailbox Attribute . . . . . . . 3 3.1. Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . 4 3.2. Examples . . . . . . . . . . . . . . . . . . . . . . . . . 4 3.2.1. Example of a LIST Response . . . . . . . . . . . . . . . 4 3.2.2. Examples of Creating a New Mailbox Using "\Important" . . 4 4. Implementation Notes . . . . . . . . . . . . . . . . . . . . 5 5. Security Considerations . . . . . . . . . . . . . . . . . . . 5 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 6 6.1. Registration of the "$Important" Keyword . . . . . . . . . 6 6.2. Creation of the IMAP Mailbox Name Attributes Registry . . . 7 6.2.1. Instructions to the Designated Expert . . . . . . . . . . 8 6.3. Initial Entries for the IMAP Mailbox Name Attributes Registry . . . . . . . . . . . . . . . . . . . . . . . . . 9 7. References . . . . . . . . . . . . . . . . . . . . . . . . . 10 7.1. Normative References . . . . . . . . . . . . . . . . . . . 10 7.2. Informative References . . . . . . . . . . . . . . . . . . 10 Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 11 1. Introduction The Internet Message Access Protocol (IMAP) specification [RFC3501] defines the use of message keywords, and an "IMAP Keywords" registry is created in [RFC5788]. [RFC6154] defines an extension to the IMAP LIST command for special-use mailboxes. The extension allows servers to provide extra information (attributes) about the purpose of a mailbox and defines an initial set of special-use attributes. This document does the following: o defines a new message keyword, "$Important", to apply to messages that are considered important for the user by some externally defined criteria; o registers the "$Important" keyword in the "IMAP Keywords" registry; o defines a new special-use attribute, "\Important", to designate a mailbox that will hold messages that are considered important for the user by some externally defined criteria; and Leiba Standards Track [Page 2] RFC 8457 IMAP "Important" Keyword and Attribute September 2018 o creates a registry for IMAP mailbox attributes and registers the new attribute and those defined in [RFC5258], [RFC3501], and [RFC6154]. 1.1. Conventions Used in This Document In the examples used in this document, "C:" indicates lines sent by a client that is connected to a server, and "S:" indicates lines sent by the server to the client. 2. Definition of the "$Important" Message Keyword The "$Important" keyword is a signal that a message is likely important to the user. The keyword is generally expected to be set automatically by the system based on available signals (such as who the message is from, who else the message is addressed to, evaluation of the subject or content, or other heuristics). While the keyword also can be set by the user, that is not expected to be the primary usage. This is distinct from the "\Flagged" system flag in two ways: 1. "$Important" carries a meaning of general importance, as opposed to follow-up or urgency. It is meant to be used for a form of triage, with "\Flagged" remaining as a designation of special attention, need for follow-up, or time sensitivity. In particular, the sense of "$Important" is that other messages that are "like this one" according to some server-applied heuristics will also be considered "$Important". 2. The setting of "$Important" is expected to be based at least partly on heuristics (generally set automatically by the server), whereas "\Flagged" is only intended to be set by the user with some sort of "flag this message" or "put a star on this message" interface. 3. Definition of the 'Important' Mailbox Attribute The "\Important" mailbox attribute is a signal that the mailbox contains messages that are likely important to the user. In an implementation that also supports the "$Important" keyword, this special use is likely to represent a virtual mailbox collecting messages (from other mailboxes) that are marked with the "$Important" keyword. In other implementations, the system might automatically put messages there based on the same sorts of heuristics that are noted for the "$Important" keyword (see Section 2). The distinctions between "\Important" and "\Flagged" for mailboxes are similar to those between "$Important" and "\Flagged" for messages. Leiba Standards Track [Page 3] RFC 8457 IMAP "Important" Keyword and Attribute September 2018 3.1. Formal Syntax The following syntax specification adds to the one in Section 6 of [RFC6154] using Augmented Backus-Naur Form (ABNF) as described in [RFC5234]. Be sure to see the ABNF notes at the beginning of Section 9 of [RFC3501]. use-attr =/ "\Important" 3.2. Examples 3.2.1. Example of a LIST Response In the following example, the mailbox called "Important Messages" is the one designated with the "\Important" attribute. C: t1 LIST "" "Imp*" S: * LIST (\HasNoChildren \Important) "/" "Important Messages" S: * LIST (\HasNoChildren) "/" "Imported Wine" S: t1 OK Success 3.2.2. Examples of Creating a New Mailbox Using "\Important" In the following example, the mailbox called "Important Messages" is created with the "\Important" attribute on a server that advertises the "CREATE-SPECIAL-USE" capability string. C: t1 CREATE "Important Messages" (USE (\Important)) S: t1 OK Mailbox created The following example is similar to the previous one, but the server is not able to assign the "\Important" attribute to the new mailbox. C: t1 CREATE "Important Messages" (USE (\Important)) S: t1 NO [USEATTR] An \Important mailbox already exists The following example is similar to the previous one, but the server does not support this extension. C: t1 CREATE "Important Messages" (USE (\Important)) S: t1 NO [USEATTR] Mailbox not created; unsupported use \Important In both of the failure-mode examples, the "USEATTR" response code lets the client know that the problem is in the "USE" parameters. Note that the same response code is given in both cases, and the human-readable text is the only way to tell the difference. That text is not parsable by the client (it can only be logged and/or reported to the user). Leiba Standards Track [Page 4] RFC 8457 IMAP "Important" Keyword and Attribute September 2018 4. Implementation Notes This section is non-normative and is intended to describe the intended (and current as of this publication) usage of "$Important" in contrast with "\Flagged" on a message. On the server: o "\Flagged" is set or cleared in response to an explicit command from the client. o "$Important" is set via a heuristic process performed by the server and usually involves analysis of header fields, what mailbox the message is filed in, perhaps message content, attachments, and such. It may then be set or cleared in response to an explicit command from the client, and the server may use that to adjust the heuristics in the future. It's also possible that the server will re-evaluate this and make a message "$Important" later if the user accesses the message frequently, for example. On the client: o Typically, an icon such as a flag or a star (or an indication, such as red or bold text) is associated with "\Flagged", and the UI provides a way for the user to turn that icon or indication on or off. Manipulation of this results in a command to the server. o Typically, a lesser indication is used for "$Important". The client might or might not provide the user with a way to manipulate it. If it does, manipulation results in a command to the server. 5. Security Considerations The security considerations in Section 7 of [RFC6154] apply equally to this extension, in particular, "Conveying special-use information to a client exposes a small bit of extra information that could be of value to an attacker." Moreover, identifying important messages or a place where important messages are kept could give an attacker a strategic starting point. If the algorithm by which messages are determined to be important is well known, still more information is exposed -- perhaps, for example, there is an implication that the senders of these messages are particularly significant to the mailbox owner, and perhaps that is information that should not be made public. Leiba Standards Track [Page 5] RFC 8457 IMAP "Important" Keyword and Attribute September 2018 As noted in RFC 6154, it is wise to protect the IMAP channel from passive eavesdropping and to defend against unauthorized discernment of the identity of a user's "\Important" mailbox or of a user's "$Important" messages. See Section 11 of [RFC3501] for security considerations about using the IMAP STARTTLS command to protect the IMAP channel. 6. IANA Considerations IANA has completed three actions, which are specified in the sections below: 1. registration of the "$Important" keyword; 2. creation of a new "IMAP Mailbox Name Attributes" registry; and 3. registration of initial entries in the "IMAP Mailbox Name Attributes" registry. 6.1. Registration of the "$Important" Keyword IANA has registered the "$Important" keyword in the "IMAP Keywords" registry, as follows, using the template in [RFC5788]. IMAP keyword name: $Important Purpose (description): The "$Important" keyword is a signal that a message is likely important to the user. Private or Shared on a server: PRIVATE Is it an advisory keyword or may it cause an automatic action: Advisory (but see the reference for details). When/by whom the keyword is set/cleared: The keyword can be set by the user, or automatically by the system based on available signals (such as who the message is from, who else the message is addressed to, evaluation of the subject or content, or other heuristics). Related keywords: None (see the reference for the related mailbox name attribute). Related IMAP capabilities: None. Security considerations: See Section 5 of RFC 8457. Published specification: RFC 8457 Leiba Standards Track [Page 6] RFC 8457 IMAP "Important" Keyword and Attribute September 2018 Person & email address to contact for further information: IETF Applications and Real-Time Area <art@ietf.org> Intended usage: COMMON Owner/Change controller: IESG Note: None. 6.2. Creation of the IMAP Mailbox Name Attributes Registry IANA has created a new registry in the group "Internet Message Access Protocol (IMAP)". It is called "IMAP Mailbox Name Attributes", and it has two references: "RFC 3501, Section 7.2.2", and "RFC 8457, Section 6". This registry will be shared with the JSON Meta Application Protocol (JMAP) for Mail [JMAP-MAIL]. The registry entries contain the following fields: 1. Attribute Name 2. Description 3. Reference 4. Usage Notes IANA keeps this list in alphabetical order by Attribute Name, which is registered without the initial backslash ("\"). The names are generally registered with initial capital letters but are treated as case-insensitive US-ASCII strings. The "Usage Notes" field is free-form US-ASCII text that will normally be empty (and is empty if it's not specified in the registration request). It is intended to hold things such as "not used by JMAP" and "JMAP only". The field is for human use, and there is no need for a registry of strings that may appear here. The registration policy for the new registry is listed as "IETF Review" or "Expert Review" [RFC8126], and new registrations will be accepted in one of two ways: 1. For registrations requested in an IETF consensus document, the registration policy will be IETF Review, and the request will be made in the IANA Considerations section of the document, which gives the requested values for each of the fields. 2. For other registrations, the policy will be Expert Review policy (see Section 6.2.1), and the request will be made by sending email to IANA asking for a new IMAP Mailbox Name Attribute and giving the requested values for each of the fields. While a Leiba Standards Track [Page 7] RFC 8457 IMAP "Important" Keyword and Attribute September 2018 formal specification is not required, the reference document should provide a description of the proposed attribute sufficient for building interoperable implementations. An Informational RFC (submitted, for example, through the IETF or Independent stream) is a fine way to publish a reference document (see also Section 6.2.1). 6.2.1. Instructions to the Designated Expert The expert reviewer, who will be designated by the IESG, is expected to provide only a general review of the requested registration, checking that the reference and description are adequate for understanding the intent of the registered attribute. Efforts should also be made to generalize the intent of an attribute so that multiple implementations with the same requirements may reuse existing attributes. Except for this check, this is intended to be very close to a first come first served policy, and the expert should not block serious registration requests with a reasonable reference. The reference may be to any form of documentation, including a web page, but consideration should be given to providing one that is expected to be long-lived and stable. Leiba Standards Track [Page 8] RFC 8457 IMAP "Important" Keyword and Attribute September 2018 6.3. Initial Entries for the IMAP Mailbox Name Attributes Registry The registry initially contains these entries: +===============+===================================+===========+ | Attribute | Description | Reference | | Name | | | +===============+===================================+===========+ | All | All messages | [RFC6154] | +---------------+-----------------------------------+-----------+ | Archive | Archived messages | [RFC6154] | +---------------+-----------------------------------+-----------+ | Drafts | Messages that are working drafts | [RFC6154] | +---------------+-----------------------------------+-----------+ | Flagged | Messages with the \Flagged flag | [RFC6154] | +---------------+-----------------------------------+-----------+ | HasChildren | Has accessible child mailboxes | [RFC5258] | * +---------------+-----------------------------------+-----------+ | HasNoChildren | Has no accessible child mailboxes | [RFC5258] | * +---------------+-----------------------------------+-----------+ | Important | Messages deemed important to user | RFC 8457 | +---------------+-----------------------------------+-----------+ | Junk | Messages identified as Spam/Junk | [RFC6154] | +---------------+-----------------------------------+-----------+ | Marked | Server has marked the mailbox as | [RFC3501] | * | | "interesting" | | +---------------+-----------------------------------+-----------+ | NoInferiors | No hierarchy under this name | [RFC3501] | * +---------------+-----------------------------------+-----------+ | NonExistent | The mailbox name doesn't actually | [RFC5258] | * | | exist | | +---------------+-----------------------------------+-----------+ | Noselect | The mailbox is not selectable | [RFC3501] | * +---------------+-----------------------------------+-----------+ | Remote | The mailbox exists on a remote | [RFC5258] | * | | server | | +---------------+-----------------------------------+-----------+ | Sent | Sent mail | [RFC6154] | +---------------+-----------------------------------+-----------+ | Subscribed | The mailbox is subscribed to | [RFC5258] | +---------------+-----------------------------------+-----------+ | Trash | Messages the user has discarded | [RFC6154] | +---------------+-----------------------------------+-----------+ | Unmarked | No new messages since last select | [RFC3501] | * +===============+===================================+===========+ The rows marked with "*" at the end have their Usage Notes field set to "not used by JMAP". Leiba Standards Track [Page 9] RFC 8457 IMAP "Important" Keyword and Attribute September 2018 7. References 7.1. Normative References [RFC3501] Crispin, M., "INTERNET MESSAGE ACCESS PROTOCOL - VERSION 4rev1", RFC 3501, DOI 10.17487/RFC3501, March 2003, <https://www.rfc-editor.org/info/rfc3501>. [RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, DOI 10.17487/RFC5234, January 2008, <https://www.rfc-editor.org/info/rfc5234>. [RFC6154] Leiba, B. and J. Nicolson, "IMAP LIST Extension for Special-Use Mailboxes", RFC 6154, DOI 10.17487/RFC6154, March 2011, <https://www.rfc-editor.org/info/rfc6154>. [RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 8126, DOI 10.17487/RFC8126, June 2017, <https://www.rfc-editor.org/info/rfc8126>. 7.2. Informative References [JMAP-MAIL] Jenkins, N. and C. Newman, "JMAP for Mail", Work in Progress, draft-ietf-jmap-mail-07, August 2018. [RFC5258] Leiba, B. and A. Melnikov, "Internet Message Access Protocol version 4 - LIST Command Extensions", RFC 5258, DOI 10.17487/RFC5258, June 2008, <https://www.rfc-editor.org/info/rfc5258>. [RFC5788] Melnikov, A. and D. Cridland, "IMAP4 Keyword Registry", RFC 5788, DOI 10.17487/RFC5788, March 2010, <https://www.rfc-editor.org/info/rfc5788>. Leiba Standards Track [Page 10] RFC 8457 IMAP "Important" Keyword and Attribute September 2018 Contributors The following author was an original contributor to this document in addition to the editor. Eric "Iceman" Google Email: iceman@google.com Author's Address Barry Leiba (editor) Huawei Technologies Phone: +1 646 827 0648 Email: barryleiba@computer.org URI: http://internetmessagingtechnology.org/ Leiba Standards Track [Page 11]