💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc7081.txt captured on 2022-06-04 at 00:51:32.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Internet Engineering Task Force (IETF) E. Ivov Request for Comments: 7081 Jitsi Category: Informational P. Saint-Andre ISSN: 2070-1721 Cisco Systems, Inc. E. Marocco Telecom Italia November 2013 CUSAX: Combined Use of the Session Initiation Protocol (SIP) and the Extensible Messaging and Presence Protocol (XMPP) Abstract This document suggests some strategies for the combined use of the Session Initiation Protocol (SIP) and the Extensible Messaging and Presence Protocol (XMPP) both in user-oriented clients and in deployed servers. Such strategies, which mainly consist of configuration changes and minimal software modifications to existing clients and servers, aim to provide a single, full-featured, real- time communication service by using complementary subsets of features from SIP and from XMPP. Typically, such subsets consist of telephony capabilities from SIP and instant messaging and presence capabilities from XMPP. This document does not define any new protocols or syntax for either SIP or XMPP and, by intent, does not attempt to standardize "best current practices". Instead, it merely aims to provide practical guidance to those who are interested in the combined use of SIP and XMPP for real-time communication. Status of This Memo This document is not an Internet Standards Track specification; it is published for informational purposes. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Not all documents approved by the IESG are a candidate for any level of Internet Standard; see Section 2 of RFC 5741. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc7081. Ivov, et al. Informational [Page 1] RFC 7081 Combined Use of SIP and XMPP November 2013 Copyright Notice Copyright (c) 2013 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction ....................................................2 2. Client Bootstrap ................................................5 3. Operation .......................................................6 3.1. Server-Side Setup ..........................................7 3.2. Service Management .........................................7 3.3. Client-Side Discovery and Usability ........................8 3.4. Indicating a Relationship between SIP and XMPP Accounts ....9 3.5. Matching Incoming SIP Calls to XMPP JIDs ..................10 4. Multi-Party Interactions .......................................11 5. Federation .....................................................12 6. Summary of Suggested Strategies ................................13 7. Security Considerations ........................................14 8. References .....................................................15 8.1. Normative References ......................................15 8.2. Informative References ....................................16 Appendix A. Acknowledgements ......................................18 1. Introduction Historically, SIP [RFC3261] and XMPP [RFC6120] have often been implemented and deployed with different purposes: from its very start, SIP's primary goal has been to provide a means of conducting "Internet telephone calls". On the other hand, XMPP has, from its Jabber days, been mostly used for instant messaging, presence [RFC6121], and related services such as groupchat rooms [XEP-0045]. Ivov, et al. Informational [Page 2] RFC 7081 Combined Use of SIP and XMPP November 2013 For various reasons, these trends have continued through the years, even after each of the protocols had been equipped to provide the features it was initially lacking: o In the context of the SIP for Instant Messaging and Presence Leveraging Extensions (SIMPLE) working group, the IETF has defined a number of protocols and protocol extensions that not only allow for SIP to be used for regular instant messaging and presence but that also provide mechanisms for related features such as multi-party chat, server-stored contact lists, and file transfer [RFC6914]. o Similarly, the XMPP community and the XMPP Standards Foundation have worked on defining a number of XMPP Extension Protocols (XEPs) that provide XMPP implementations with the means of establishing end-to-end sessions. These extensions are often jointly referred to as Jingle [XEP-0166], and arguably their most popular use case is audio and video calling [XEP-0167]. However, although SIP has been extended for messaging and presence and XMPP has been extended for voice and video, the reality is that SIP remains the protocol of choice for telephony-like services, and XMPP remains the protocol of choice for IM and presence services. As a result, a number of adopters have found themselves needing features that are not offered by any single-protocol solution, but ones that separately exist in SIP and XMPP implementations. The idea of seamlessly using both protocols together would hence often appeal to service providers and users. Most often, such a service would employ SIP exclusively for audio, video, and telephony services and rely on XMPP for anything else varying from chat, contact-list management, and presence to whiteboarding and exchanging files. Because these services and clients involve the combined use of SIP and XMPP, we label them "CUSAX" for short. +------------+ +-------------+ | SIP Server | | XMPP Server | +------------+ +-------------+ \ / media \ / instant messaging, signaling \ / presence, etc. \ / +--------------+ | CUSAX Client | +--------------+ Figure 1: Division of Responsibilities Ivov, et al. Informational [Page 3] RFC 7081 Combined Use of SIP and XMPP November 2013 This document suggests different configuration options and minimal modifications to existing software so that clients and servers can offer these hybrid services while providing an optimal user experience. It covers server discovery, determining a SIP Address of Record (AOR) while using XMPP, and determining an XMPP Jabber Identifier (JID) from incoming SIP requests. Most of the text here pertains to client behavior, but we also suggest certain server-side configurations and operational strategies. The document also discusses significant security considerations that can arise when offering a dual-protocol solution and provides advice for avoiding security mismatches that would result in degraded communications security for end users. Note that this document is focused on coexistence of SIP and XMPP functionality in end-user-oriented clients. By intent, it does not define methods for protocol-level mapping between SIP and XMPP, as might be used within a server-side gateway between a SIP network and an XMPP network (a separate series of documents has been produced that defines such mappings). More generally, this document does not describe service policies for inter-domain communication (often called "federation") between service providers (e.g., how a service provider that offers a CUSAX service might communicate with a SIP-only or XMPP-only service), nor does it describe the reasons why a service provider might choose SIP or XMPP for various features. This document concentrates on use cases where the SIP services and XMPP services are controlled by one and the same provider, since that assumption greatly simplifies both client implementation and server-side deployment (e.g., a single service provider can enforce common or coordinated policies across both the SIP and XMPP aspects of a CUSAX service, which is not possible if a SIP service is offered by one provider and an XMPP service is offered by another provider). Since this document is of an informational nature, it is not unreasonable for clients to apply some of the guidelines here even in cases where there is no established relationship between the SIP and the XMPP services (for example, it is reasonable for a client to provide a way for its users to easily start a call to a phone number or SIP URI found in a vCard or obtained from a user directory). However, the strategies to pursue in such cases are left to application developers. This document makes a further simplifying assumption by discussing only the use of a single client, not use of and coordination among multiple endpoints controlled by the same user (e.g., user agents running simultaneously on a laptop computer, tablet, and mobile phone). Although user agents running on separate endpoints might themselves be CUSAX clients or might engage in different aspects of an interaction (e.g., a user might employ her mobile phone for audio Ivov, et al. Informational [Page 4] RFC 7081 Combined Use of SIP and XMPP November 2013 and her tablet for video and text chat), such usage complicates the guidelines for developers of user agents and therefore is left as a matter of implementation for now. It is important to note that this document does not attempt to standardize "best current practices" in the sense defined in the Internet Standards Process [RFC2026]. Instead, it collects together informational documentation about some strategies that might prove helpful to those who implement and deploy combined SIP/XMPP software and services. With sufficient use and appropriate modification to incorporate the lessons of experience, these strategies might someday form the basis for standardization of best current practices. 2. Client Bootstrap One of the main problems of using two distinct protocols when providing one service is the impact on usability. Email services, for example, have long been affected by the mixed use of SMTP for outgoing mail and Post Office Protocol version 3 (POP3) or IMAP for incoming mail. Although standard service discovery methods (such as the proper DNS records) make it possible for a user agent to locate the right host(s) for connect purposes, they do not provide the kind of detailed information that is needed to actually configure the user agent for use with the service. As a result, it is rather complicated for inexperienced users to configure a mail client and start using it with a new service; and as a result, Internet service providers often need to provide configuration instructions for various mail clients. Client developers and communication device manufacturers, on the other hand, often ship with a number of so-called "wizard" interfaces that enable users to easily configure accounts with a number of popular email services. Although this may improve the situation to some extent, the user experience is still clearly suboptimal. While it should be possible for CUSAX users to manually configure their separate SIP and XMPP accounts (often using "wizards"), service providers offering CUSAX services to users of dual-stack SIP/XMPP clients ought to provide methods for online provisioning, typically by means of a web-based service at an HTTPS URL (naturally, single- purpose SIP services or XMPP services could offer such methods as well, but they can be especially helpful where the two aspects of the CUSAX service need to have several configuration options in common). Although the specifics of such mechanisms are outside the scope of this document, they should make it possible for a service provider to remotely configure the clients based on minimal user input (e.g., only a user ID and password). As far as the authors are aware, no open protocol for endpoint configuration is yet available and Ivov, et al. Informational [Page 5] RFC 7081 Combined Use of SIP and XMPP November 2013 adopted; however, application developers are encouraged to explore the potential for future progress in this space (e.g., perhaps based on technologies such as WebFinger [RFC7033]). By default, when a CUSAX client is used in concert with SIP and XMPP accounts that have a CUSAX relationship (see Section 3.4), the client should disable audio and video calling over XMPP and disable instant messaging and presence over SIP. (It is a matter of implementation whether a CUSAX client allows a user to override these defaults in various ways, e.g., by domain, by individual contact, or by device.) The main advantage of this approach is that a client would employ the most relevant features from both SIP and XMPP when used in the context of a CUSAX service. Note that this default configuration does not apply to stand-alone SIP accounts or XMPP accounts, for which other settings are likely to be more appropriate (see Section 3.4 for details). Once a client has been provisioned, it needs to independently log into the SIP account and XMPP account that make up the CUSAX "service" and then maintain both connections. In order to improve the user experience, when reporting connection status, a CUSAX client may wish to present the XMPP connection as an "instant messaging" or a "chat" account and the SIP connection as a "Voice and Video" or a "Telephony" connection. The exact naming is of course entirely up to implementers. The point is that, in cases where SIP and XMPP are components of a service offered by a single provider, such presentation could help users better understand why they are being shown two different connections for what they perceive as a single service (especially when one of the connections is disrupted while the other one is still active). Alternatively, the developers of a CUSAX client or the providers of a CUSAX service might decide to force a client to completely disconnect unless both aspects are successfully connected. Clients may also choose to delay their XMPP connection until they have been successfully registered on SIP. This would help avoid the situation where a user appears online to her contacts but calling the user's client would fail because the user's client is still connecting to the SIP aspect of the CUSAX service. 3. Operation Once a CUSAX client has been provisioned and authorized to connect to the corresponding SIP and XMPP services, it would proceed by retrieving its XMPP roster. Ivov, et al. Informational [Page 6] RFC 7081 Combined Use of SIP and XMPP November 2013 The client should use XMPP for most forms of communication with the contacts from this roster, which will occur naturally because they were retrieved through XMPP. Audio/video features, however, would typically be disabled in the XMPP stack, so media-related communication based on these features (e.g., direct calls, conferences, desktop streaming, etc.) would happen over SIP. The rest of this section describes deployment, discovery, usability, and linking semantics that enable CUSAX clients to seamlessly use SIP for these features. 3.1. Server-Side Setup In order for CUSAX to function properly, XMPP service administrators should make sure that at least one of the vCard [RFC6350] "tel" fields for each contact is properly populated with a SIP URI for the user's address at the SIP audio/video service provided by the CUSAX server. There are no limitations as to the form of that number. For example, while it is desirable to maintain a certain consistency between SIP AORs and XMPP JIDs, that is by no means required. It is quite important, however, that the phone number or SIP AOR stored in the vCard be reachable through the SIP aspect of this CUSAX service. (The same considerations apply even if the directory storage format is not vCard storage over XMPP as described by [XEP-0054] or [XEP-0292].) Administrators may also choose to include the "video" tel type defined in [RFC6350] for accounts that would be capable of handling video communication. To ensure that the foregoing approach is always respected, service providers might consider validating the values of vCard "tel" fields before storing changes. Of course, such validation would be feasible only in cases where a single provider controls both the XMPP and the SIP service since such providers would "know" (e.g., based on use of a common user database for both services) what SIP AOR corresponds to a given XMPP user. 3.2. Service Management The task of operating and managing a stand-alone SIP service or XMPP service is not always easy. Combining the two into a unified service introduces additional challenges, including: o The necessity of opening additional ports on the client side if SIP functionality is added to an existing XMPP deployment, or vice versa. Ivov, et al. Informational [Page 7] RFC 7081 Combined Use of SIP and XMPP November 2013 o The potential for important differences in security posture across SIP and XMPP (e.g., SIP servers and XMPP servers might support different Transport Layer Security (TLS) ciphersuites). o The need for, ideally, a common authentication backend and other infrastructure that is shared across the SIP and XMPP aspects of the combined service. o Coordinated monitoring and logging of the SIP and XMPP servers to enable the correlation of incidents and the pinpointing of problems. o The difficulty of troubleshooting client-side issues, e.g., if the client loses connectivity for XMPP but maintains its SIP connection. Although separation of functionality (SIP for media and XMPP for IM and presence) can help to ease the operational burden to some extent, service providers are urged to address the foregoing challenges and similar issues when preparing to launch a CUSAX service. Beyond the issues listed above, service providers might want to be aware of more subtle operational issues that can arise. For example, if a service provider uses different network operators for the SIP service and the XMPP service, end-to-end connectivity might be more reliable or consistent in one service than in the other service. Similar issues can arise when the media path and the signaling path go over different networks, even in stand-alone SIP or XMPP services. Providers of CUSAX services are advised to consider the potential for such topologies to cause operational challenges. 3.3. Client-Side Discovery and Usability When rendering the roster for a particular XMPP account, CUSAX clients should make sure that users are presented with a "Call" option for each roster entry that has a properly set "tel" field. This is the case even if calling features have been disabled for that particular XMPP account, as advised by this document. The usefulness of such a feature is not limited to CUSAX. After all, numbers are entered in vCards or stored in directories in order to be dialed and called. Hence, as long as an XMPP client has any means of conducting a call, it may wish to make it possible for the user to easily dial any numbers that it learned through whatever means. Clients that have separate triggers (e.g., buttons) for audio calls and video calls may choose to use the presence or absence of the "video" tel type defined in [RFC6350] as the basis for choosing Ivov, et al. Informational [Page 8] RFC 7081 Combined Use of SIP and XMPP November 2013 whether to enable or disable the possibility for starting video calls (i.e., if there is no "video" tel type for a particular contact, the client could disable the "video call" button for that contact). In addition to discovering phone numbers from vCards or user directories, clients may also check for alternative communication methods as advertised in XMPP presence broadcasts and Personal Eventing Protocol nodes as described in "XEP-0152: Reachability Addresses" [XEP-0152]. However, these indications are merely hints, and a receiving client ought not associate a SIP address and an XMPP address unless it has some way to verify the relationship (e.g., the vCard of the XMPP account lists the SIP address and the vCard of the SIP account lists the XMPP address, or the relationship is made explicit in a record provided by a trusted directory). Alternatively, or in cases where vCard or directory data is not available, a CUSAX client could take the user's own address book as the canonical source for contact addresses. 3.4. Indicating a Relationship between SIP and XMPP Accounts In order to improve usability, in cases where clients are provisioned with only a single telephony-capable account they ought to initiate calls immediately upon user request without asking users to indicate an account that the call should go through. This way, CUSAX users (whose only account with calling capabilities is usually the SIP part of their service) would have a better experience, since from the user's perspective calls "just work at the click of a button". In some cases, however, clients will be configured with more than the two XMPP and SIP accounts provisioned by the CUSAX provider. Users are likely to add additional stand-alone XMPP or SIP accounts (or accounts for other communications protocols), any of which might have both telephony and instant messaging capabilities. Such situations can introduce additional ambiguity since all of the telephony-capable accounts could be used for calling the numbers the client has learned from vCards or directories. To avoid such confusion, client implementers and CUSAX service providers may choose to indicate the existence of a special relationship between the SIP and XMPP accounts of a CUSAX service. For example, let's say that Alice's service provider has opened both an XMPP account and a SIP account for her. During or after provisioning, her client could indicate that alice@xmpp.example.com has a CUSAX relationship to alice@sip.example.com (i.e., that they are two aspects of the same service). This way, whenever Alice triggers a call to a contact in her XMPP roster, the client would preferentially initiate this call through her example.com SIP account even if other possibilities exist (such as the XMPP account where the Ivov, et al. Informational [Page 9] RFC 7081 Combined Use of SIP and XMPP November 2013 vCard was obtained or a SIP account with another provider). Similarly, the client would preferentially initiate textual chat sessions using her XMPP account. If, on the other hand, no relationship has been configured or discovered between a SIP account and an XMPP account, and the client is aware of multiple telephony-capable accounts, it ought to present the user with the option of using XMPP Jingle as one method for engaging in audio and video interactions with a contact who has an XMPP address. This can help to ensure that a CUSAX user can complete audio and video calls with XMPP users who are not part of a CUSAX deployment. 3.5. Matching Incoming SIP Calls to XMPP JIDs When receiving a SIP call, a CUSAX client may wish to determine the identity of the caller and a corresponding XMPP roster entry so that the receiving user could revert to chatting or other forms of communication that require XMPP. To do so, a CUSAX client could search the user's roster for an entry whose vCard has a "tel" field matching the originator of the call. In addition, in order to avoid the effort of iterating over the entire roster of the user and retrieving vCards for all of the user's contacts, the receiving client may guess at the identity of the caller based a SIP Call-Info header whose 'purpose' header field parameter has a value of "impp" as described in [RFC6993]. To enable this usage, a sending client would need to include such a Call-Info header in the SIP messages that it sends when initiating a call. An example follows. Call-Info: <xmpp:alice@xmpp.example.com> ;purpose=impp Note that the information from the Call-Info header should only be used as a cue: the actual AOR-to-JID binding would still need to be confirmed by the vCard of a contact in the receiving user's roster or through some other trusted means (such as an enterprise directory). If this confirmation succeeds, the client would not need to search the entire roster and retrieve all vCards. Not performing the check might enable any caller (including malicious ones) to employ someone else's identity and perform various scams or Man-in-the-Middle attacks. However, although an AOR-to-JID binding can be a helpful hint to the user, nothing in the foregoing paragraph ought to be construed as necessarily discouraging users, clients, or service providers from accepting calls originated by entities that are not established contacts of the user (e.g., as reflected in the user's roster); that is a policy matter for the user, client, or service provider. Ivov, et al. Informational [Page 10] RFC 7081 Combined Use of SIP and XMPP November 2013 It is also worth noting that callers preferring to remain anonymous as per [RFC3325] would not provide Call-Info information. 4. Multi-Party Interactions CUSAX clients that support the SIP conferencing framework [RFC4353] can detect when a call they are participating in is actually a conference and can then subscribe to conference state updates as per [RFC4575]. A regular SIP user agent might also use the same conference URI for text communication with the Message Session Relay Protocol (MSRP). However, given that SIP's instant messaging capabilities would normally be disabled (or simply not supported) in CUSAX deployments, an XMPP Multi-User Chat (MUC) room [XEP-0045] associated with the conference can be announced/discovered through <service-uris> bearing the "grouptextchat" purpose [GROUPTEXTCHAT]. Similarly, an XMPP MUC room can advertise the SIP URI of an associated service for audio/video interactions using the 'audio-video-uri' field of the "muc#roominfo" data form [XEP-0004] to include extended information [XEP-0128] about the MUC room within XMPP service discovery [XEP-0030]; see [XEP-0045] for an example. These methods would enable a CUSAX-aware SIP conference server to advertise the existence of an associated XMPP chat room and for a CUSAX-aware XMPP chat room to advertise the existence of an associated SIP conference server. If a CUSAX client joins the MUC room associated with a particular call, it should not rely on any synchronization between the two. Both the SIP conference and the XMPP MUC room would function independently, each issuing and delivering its own state updates. Hence, it is possible that certain peers would temporarily or permanently be reachable in only one of the two conferences. This would typically be the case with single-stack clients that have only joined the SIP call or the XMPP MUC room. It is therefore important for CUSAX clients to provide a clear indication to users as to the level of involvement of the various participants: i.e., a user needs to be able to easily understand whether a certain participant can receive text messages, audio/video, or both. At the level of the CUSAX service, it is also possible to enforce tighter integration between the XMPP MUC room and the SIP conference. Permissions, roles, kicks, and bans that are granted and performed in the MUC room can easily be imitated by the conference focus/mixer into the SIP call. If, for example, a certain MUC member is muted, the conference mixer can choose to also apply the mute on the media stream corresponding to that participant. However, the details and exact level of such integration are entirely up to implementers and service providers. Ivov, et al. Informational [Page 11] RFC 7081 Combined Use of SIP and XMPP November 2013 The approach above describes one relatively lightweight possibility of combining SIP and XMPP multi-party interaction semantics without requiring tight integration between the two. As with the rest of this document, this approach is by no means normative. Implementations and future documents may define other methods or provide other suggestions for improving the unified communications user experience in cases of multi-user chats and conference calling. 5. Federation In theory, there are no technical reasons why federation (i.e., inter-domain communication) would require special behavior from CUSAX clients. However, it is worth noting that differences in administration policies may sometimes lead to potentially confusing user experiences. For example, let's say atlanta.example.com observes the CUSAX policies described in this document. All XMPP users at atlanta.example.com are hence configured to have vCards that match their SIP identities. Alice is therefore used to making free, high- quality SIP calls to all the people in her roster. Alice can also make calls to the Public Switched Telephone Network (PSTN) by simply dialing numbers. She may even be used to these calls being billed to her online account, so she would be careful about how long they last. This is not a problem for her since she can easily distinguish between a free SIP call (one that she made by calling one of her roster entries) from a paid PSTN call that she dialed as a number. Then, Alice adds xmpp:bob@biloxi.example.com. The Biloxi domain only has an XMPP service. There is no SIP server and Bob uses an XMPP-only client. However, Bob has added his mobile number to his vCard in order to make it easily accessible to his contacts. Alice's client would pick up this number and make it possible for Alice to start a call to Bob's mobile phone number. This could be a problem because, other than the fact that Bob's address is from a different domain, Alice would have no obvious and straightforward cues telling her that this is in fact a call to the PSTN. In addition to the potentially lower audio quality, Alice may also end up incurring unexpected charges for such calls. In order to avoid such issues, providers maintaining a CUSAX service for the users in their domain may choose to provide additional cues (e.g., a service-generated signal that triggers a user-interface warning in a CUSAX client, an auditory tone, or a spoken message) indicating that a call would incur unexpected charges. Ivov, et al. Informational [Page 12] RFC 7081 Combined Use of SIP and XMPP November 2013 Another scenario arises when a SIP service allows communication only with intra-domain numbers; here, Alice might be prevented from establishing a call with Bob's mobile phone. Providers should therefore make sure that calls to inter-domain numbers are flagged with an appropriate audio or textual warning. 6. Summary of Suggested Strategies The following strategies are suggested for CUSAX user agents: 1. By default, prefer SIP for audio and video and XMPP for messaging and presence. 2. Use XMPP for all forms of communication with the contacts from the XMPP roster, with the exception of features that are based on establishing real-time sessions (e.g., audio/video calls) for which SIP should be used. 3. Provide online provisioning options for providers to remotely set up SIP and XMPP accounts so that users wouldn't need to go through a multi-step configuration process. 4. Provide online provisioning options for providers to completely disable features for an account associated with a given protocol (SIP or XMPP) if the features are preferred in another protocol (XMPP or SIP). 5. Present a "Call" option for each roster entry that has a properly set "tel" field in the vCard or equivalent. 6. If the client is provisioned with only a single telephony- capable account, initiate calls immediately upon user request without asking users to indicate an account that the call should go through. 7. If no relationship has been configured or discovered between a SIP account and an XMPP account, and the client is aware of multiple telephony-capable accounts, present the user with the choice of reaching the contact through any of those accounts. 8. If known, indicate the existence of a special relationship between the SIP and XMPP accounts of a CUSAX service. 9. Optionally, present the XMPP connection as an "instant messaging" or a "chat" account and the SIP connection as a "Voice and Video" or a "Telephony" account. Ivov, et al. Informational [Page 13] RFC 7081 Combined Use of SIP and XMPP November 2013 10. Optionally, determine the identity of the audio/video caller and a corresponding XMPP roster entry so that the user could use textual chatting or other forms of communication that require XMPP. 11. Optionally, delay the XMPP connection until after a SIP connection has been successfully registered. 12. Optionally, check for alternative communication methods (SIP addresses advertised over XMPP and XMPP addresses advertised over SIP). The following strategies are suggested for CUSAX services: 1. Use online provisioning and configuration of accounts so that users won't need to set up two separate accounts for the CUSAX service. 2. Use online provisioning so that calling features are disabled for all XMPP accounts. 3. Ensure that at least one of the vCard "tel" fields for each XMPP user is properly populated with a SIP URI that is reachable through the SIP service. 4. Optionally, include the "video" tel type for accounts that are capable of handling video communication. 5. Optionally, provision clients with information indicating that specific SIP and XMPP accounts are related in a CUSAX service. 6. Optionally, attach a "Call-Info" header with an "impp" purpose to all SIP INVITE messages, so that clients can more rapidly associate a caller with a roster entry and display a "Caller ID". 7. Security Considerations Use of the same user agent with two different accounts providing complementary features introduces the possibility of mismatches between the security profiles of those accounts or features. Two security mismatches of particular concern are: o The SIP aspect and XMPP aspect of a CUSAX service might offer different authentication options (e.g., digest authentication for SIP as specified in [RFC3261] and Salted Challenge Response Authentication Mechanism (SCRAM) authentication [RFC5802] for XMPP as specified in [RFC6120]). Because SIP uses a password-based method (digest) and XMPP uses a pluggable framework for Ivov, et al. Informational [Page 14] RFC 7081 Combined Use of SIP and XMPP November 2013 authentication via the Simple Authentication and Security Layer (SASL) technology [RFC4422], it is also possible that the XMPP connection could be authenticated using a password-free method such as client certificates with SASL EXTERNAL, even though a username and password is used for the SIP connection. o The Transport Layer Security (TLS) [RFC5246] ciphersuites offered or negotiated on the XMPP side might be different from those on the SIP side because of implementation or configuration differences between the SIP server and the XMPP server. Even more seriously, a CUSAX client might successfully negotiate TLS when connecting to the XMPP aspect of the service but not when connecting to the SIP aspect, or vice versa. In this situation, an end user might think that the combined CUSAX session with the service is protected by TLS, even though only one aspect is protected. Security mismatches such as these (as well as others related to end- to-end encryption of messages or media) introduce the possibility of downgrade attacks, eavesdropping, information leakage, and other security vulnerabilities. User agent developers and service providers must ensure that such mismatches are avoided as much as possible (e.g., by enforcing common and strong security configurations and policies across protocols). Specifically, if both protocols are not safeguarded by similar levels of cryptographic protection, the user must be informed of that fact and given the opportunity to bring both up to the same level. Section 5 discusses potential issues that may arise due to a mismatch between client capabilities, such as calls being initiated with costs that are not expected by the end user. Such issues could be triggered maliciously, as well as by accident. Implementers therefore need to provide necessary cues to raise user awareness as suggested in Section 5. Refer to the specifications for the relevant SIP and XMPP features for detailed security considerations applying to each "stack" in a CUSAX client. 8. References 8.1. Normative References [RFC3261] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A., Peterson, J., Sparks, R., Handley, M., and E. Schooler, "SIP: Session Initiation Protocol", RFC 3261, June 2002. Ivov, et al. Informational [Page 15] RFC 7081 Combined Use of SIP and XMPP November 2013 [RFC6120] Saint-Andre, P., "Extensible Messaging and Presence Protocol (XMPP): Core", RFC 6120, March 2011. [RFC6121] Saint-Andre, P., "Extensible Messaging and Presence Protocol (XMPP): Instant Messaging and Presence", RFC 6121, March 2011. 8.2. Informative References [GROUPTEXTCHAT] Ivov, E., "A Group Text Chat Purpose for Conference and Service URIs in the Session Initiation Protocol (SIP) Event Package for Conference State", Work in Progress, June 2013. [RFC2026] Bradner, S., "The Internet Standards Process -- Revision 3", BCP 9, RFC 2026, October 1996. [RFC3325] Jennings, C., Peterson, J., and M. Watson, "Private Extensions to the Session Initiation Protocol (SIP) for Asserted Identity within Trusted Networks", RFC 3325, November 2002. [RFC4353] Rosenberg, J., "A Framework for Conferencing with the Session Initiation Protocol (SIP)", RFC 4353, February 2006. [RFC4422] Melnikov, A. and K. Zeilenga, "Simple Authentication and Security Layer (SASL)", RFC 4422, June 2006. [RFC4575] Rosenberg, J., Schulzrinne, H., and O. Levin, "A Session Initiation Protocol (SIP) Event Package for Conference State", RFC 4575, August 2006. [RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, August 2008. [RFC5802] Newman, C., Menon-Sen, A., Melnikov, A., and N. Williams, "Salted Challenge Response Authentication Mechanism (SCRAM) SASL and GSS-API Mechanisms", RFC 5802, July 2010. [RFC6350] Perreault, S., "vCard Format Specification", RFC 6350, August 2011. Ivov, et al. Informational [Page 16] RFC 7081 Combined Use of SIP and XMPP November 2013 [RFC6914] Rosenberg, J., "SIMPLE Made Simple: An Overview of the IETF Specifications for Instant Messaging and Presence Using the Session Initiation Protocol (SIP)", RFC 6914, April 2013. [RFC6993] Saint-Andre, P., "Instant Messaging and Presence Purpose for the Call-Info Header Field in the Session Initiation Protocol (SIP)", RFC 6993, July 2013. [RFC7033] Jones, P., Salgueiro, G., Jones, M., and J. Smarr, "WebFinger", RFC 7033, September 2013. [XEP-0004] Eatmon, R., Hildebrand, J., Miller, J., Muldowney, T., and P. Saint-Andre, "Data Forms", XSF XEP 0004, August 2007. [XEP-0030] Hildebrand, J., Millard, P., Eatmon, R., and P. Saint-Andre, "Service Discovery", XSF XEP 0030, June 2008. [XEP-0045] Saint-Andre, P., "Multi-User Chat", XSF XEP 0045, February 2012. [XEP-0054] Saint-Andre, P., "vcard-temp", XSF XEP 0054, July 2008. [XEP-0128] Saint-Andre, P., "Service Discovery Extensions", XSF XEP 0128, October 2004. [XEP-0152] Hildebrand, J. and P. Saint-Andre, "XEP-0152: Reachability Addresses", XEP XEP-0152, September 2013. [XEP-0166] Ludwig, S., Beda, J., Saint-Andre, P., McQueen, R., Egan, S., and J. Hildebrand, "Jingle", XSF XEP 0166, December 2009. [XEP-0167] Ludwig, S., Saint-Andre, P., Egan, S., McQueen, R., and D. Cionoiu, "Jingle RTP Sessions", XSF XEP 0167, December 2009. [XEP-0292] Saint-Andre, P. and S. Mizzi, "vCard4 Over XMPP", XSF XEP 0292, September 2013. Ivov, et al. Informational [Page 17] RFC 7081 Combined Use of SIP and XMPP November 2013 Appendix A. Acknowledgements This document is inspired by the "SIXPAC" work of Markus Isomaki and Simo Veikkolainen. Markus also provided various suggestions for improving the document. The authors would also like to thank the following people for their reviews and suggestions: Sebastien Couture, Dan-Christian Bogos, Richard Brady, Olivier Crete, Aaron Evans, Kevin Gallagher, Adrian Georgescu, Saul Ibarra Corretge, David Laban, Gergely Lukacsy, Spencer MacDonald, Murray Mar, Daniel Pocock, Travis Reitter, and Gonzalo Salgueiro. Brian Carpenter, Ted Hardie, Paul Hoffman, and Benson Schliesser reviewed the document on behalf of the General Area Review Team, the Applications Area Directorate, the Security Directorate, and the Operations and Management Directorate, respectively. Benoit Claise, Barry Leiba, and Pete Resnick provided helpful and substantive feedback during IESG review. The document shepherd was Mary Barnes. The sponsoring Area Director was Gonzalo Camarillo. Ivov, et al. Informational [Page 18] RFC 7081 Combined Use of SIP and XMPP November 2013 Authors' Addresses Emil Ivov Jitsi Strasbourg 67000 France Phone: +33-177-624-330 EMail: emcho@jitsi.org Peter Saint-Andre Cisco Systems, Inc. 1899 Wynkoop Street, Suite 600 Denver, CO 80202 USA Phone: +1-303-308-3282 EMail: psaintan@cisco.com Enrico Marocco Telecom Italia Via G. Reiss Romoli, 274 Turin 10148 Italy EMail: enrico.marocco@telecomitalia.it Ivov, et al. Informational [Page 19]