💾 Archived View for federal.cx › earthquake.gmi captured on 2022-06-03 at 23:07:54. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2022-04-29)
-=-=-=-=-=-=-
oooooooooooo .o8 oooo
######## 888 888 888 ##########
888 .ooooo. .oooo888 .ooooo. .ooood8b .ooooo. 888
Earthquake Magnitude Scale Magnitude Earthquake Effects Number/year(est.) 2.5 or less Usually not felt, but can be recorded by seismograph. 900,000 2.5 to 5.4 Often felt, but only causes minor damage. 30,000 5.5 to 6.0 Slight damage to buildings and other structures. 500 6.1 to 6.9 May cause a lot of damage in very populated areas. 100 7.0 to 7.9 Major earthquake. Serious damage. 20 8.0 or greater Great earthquake. Total destruction near epicenter. One every 5 to 10 years Earthquake Magnitude Classes Earthquakes are also classified in categories ranging from minor to great. Class Magnitude Great 8 or more Major 7 - 7.9 Strong 6 - 6.9 Moderate 5 - 5.9 Light 4 - 4.9 Minor 3 - 3.9
(GMT, m > 1.7, 60sec)
06/03 22:13:30 4.00mb 15 km WSW of Susurluk, Turkey (39.8707 27.9867)
06/03 22:09:29 2.20md 7km SSW of Walker, CA (38.4530 -119.5080)
06/03 21:54:03 1.84md 11 km SE of Pāhala, Hawaii (19.1402 -155.3880)
06/03 21:50:05 2.50ml 36 km NNW of Toyah, Texas (31.6068 -103.9706)
06/03 20:58:50 4.70mwr Guatemala (14.1165 -91.4227)
06/03 20:49:47 2.58ml 23 km WNW of Stanley, Idaho (44.3212 -115.1993)
06/03 20:46:03 2.02md 20km WSW of Petrolia, CA (40.2850 -124.5208)
06/03 20:23:13 2.19md 6 km E of La Parguera, Puerto Rico (17.9700 -66.9853)
06/03 19:59:33 4.60mb Kepulauan Babar, Indonesia (-7.0630 129.4617)
06/03 19:16:17 2.36md 4km NNW of Pinnacles, CA (36.5685 -121.1588)
06/03 19:16:11 2.10ml 24 km S of Petersville, Alaska (62.2785 -150.7843)
06/03 18:48:00 2.80ml 88 km SE of Old Harbor, Alaska (56.5799 -152.4167)
06/03 18:30:41 3.00ml 46 km NW of Ninilchik, Alaska (60.3153 -152.3142)
06/03 18:11:22 1.75ml 20km SSE of Barstow, CA (34.7335 -116.9518)
06/03 17:45:31 4.40mb 84 km SW of Jiquilillo, Nicaragua (12.2071 -88.0005)
06/03 17:44:40 4.90mww 16 km NE of Isangel, Vanuatu (-19.4233 169.3749)
06/03 16:41:41 3.30ml 35 km WSW of Mentone, Texas (31.6094 -103.9534)
06/03 16:35:10 4.90mb 126 km NNE of Lospalos, Timor Leste (-7.5036 127.5211)
06/03 16:15:37 2.15ml 21km S of Solvang, CA (34.4055 -120.1668)
06/03 16:07:40 4.40mb Near the coast of Valparaiso, Chile (-32.5191 -71.8611)
06/03 16:05:12 4.90mb 34 km SW of Émponas, Greece (35.9934 27.5996)
06/03 15:59:06 2.20ml 15 km SSW of Willow, Alaska (61.6282 -150.1740)
06/03 15:37:26 2.13md 6km WNW of Bridgeport, CA (38.2802 -119.2953)
06/03 15:20:26 4.50mb 96 km N of Tocopilla, Chile (-21.2196 -70.1371)
06/03 14:54:35 5.30mww 29 km SSW of San Pedro de Atacama, Chile (-23.1576 -68.3010)
06/03 14:45:48 3.16ml 10 km W of Quinton, Oklahoma (35.1238 -95.4840)
06/03 14:45:39 2.78ml 12 km WSW of Quinton, Oklahoma (35.0848 -95.5055)
06/03 14:31:29 1.94md 6km NE of Big Pine, CA (37.1968 -118.2392)
06/03 14:06:52 1.90ml 45 km NNW of Glacier View, Alaska (62.1952 -147.9076)
06/03 12:53:39 2.14md 13 km SSW of Honoka‘a, Hawaii (19.9697 -155.5115)
06/03 12:47:38 3.30ml 106 km SSE of Sand Point, Alaska (54.5067 -159.6644)
06/03 12:42:32 2.50ml 54 km SSW of Whites City, New Mexico (31.7203 -104.5823)
06/03 12:23:17 1.80ml 13km SE of Bodfish, CA (35.5103 -118.3893)
06/03 12:05:21 2.51ml 2km N of Manhattan Beach, CA (33.9005 -118.4137)
06/03 11:48:39 2.10ml 17 km NW of Glacier View, Alaska (61.8998 -147.9236)
06/03 11:25:23 1.82md 3 km N of La Parguera, Puerto Rico (18.0023 -67.0422)
06/03 11:13:56 1.90ml 22 km S of Skwentna, Alaska (61.7929 -151.3387)
06/03 11:03:48 2.47md 3 km SSW of Liborio Negron Torres, Puerto Rico (18.0130 -66.9597)
06/03 11:02:47 2.52ml 1 km NNE of Magna, Utah (40.7188 -112.0987)
06/03 10:41:57 1.86ml 5km SSW of Warner Springs, CA (33.2367 -116.6552)
06/03 10:40:29 3.61mlr 6km SSW of Warner Springs, CA (33.2337 -116.6642)
06/03 10:30:37 3.00ml 2 km NNW of Anchor Point, Alaska (59.7972 -151.8444)
06/03 09:46:10 1.84md 2 km SSW of Pāhala, Hawaii (19.1820 -155.4848)
06/03 09:08:07 2.36md 2 km S of Palmarejo, Puerto Rico (18.0202 -67.0763)
06/03 09:07:48 4.40mb 127 km SE of Arica, Chile (-19.2086 -69.3645)
06/03 08:50:43 2.40ml 54 km SSW of Whites City, New Mexico (31.7143 -104.5628)
06/03 08:29:10 2.30ml 36 km WSW of Mentone, Texas (31.6182 -103.9656)
06/03 08:20:44 2.05ml 19 km W of Volcano, Hawaii (19.4107 -155.4120)
06/03 08:10:56 2.10md 4 km SW of Guánica, Puerto Rico (17.9358 -66.9360)
06/03 07:07:03 4.70mb Fiji region (-17.6590 -178.8230)
06/03 07:04:15 1.95ml 20 km W of Volcano, Hawaii (19.4750 -155.4237)
06/03 07:03:35 5.60mww 141 km WNW of Naha, Japan (26.8038 126.4208)
06/03 06:40:57 2.20ml 37 km NNW of Toyah, Texas (31.6032 -103.9916)
06/03 06:37:29 2.50ml 37 km NNW of Toyah, Texas (31.6080 -103.9968)
06/03 06:34:31 3.10ml 37 km WSW of Mentone, Texas (31.6237 -103.9861)
06/03 06:34:15 4.70mb 157 km SSW of Itoman, Japan (24.8905 126.8918)
06/03 06:30:38 1.85ml 25 km E of Honaunau-Napoopoo, Hawaii (19.4502 -155.6245)
06/03 06:30:33 2.40ml 47 km W of Aleneva, Alaska (58.0313 -153.7150)
06/03 06:24:57 5.20mww 15 km NNW of Salinas, Ecuador (-2.0799 -80.9852)
06/03 06:18:51 2.45md 3 km SW of Guánica, Puerto Rico (17.9445 -66.9287)
06/03 06:05:13 4.90mb south of the Fiji Islands (-23.9229 -179.8634)
06/03 06:04:45 2.40ml 29 km NNE of Petersville, Alaska (62.7548 -150.6296)
06/03 06:02:09 1.90ml Rat Islands, Aleutian Islands, Alaska (51.9365 178.3949)
06/03 05:39:50 1.90ml 65 km NNE of Petersville, Alaska (63.0636 -150.3996)
06/03 05:30:46 3.69md 117 km NE of Punta Cana, Dominican Republic (19.4476 -67.7530)
06/03 05:24:55 2.10ml 85 km NW of Aleneva, Alaska (58.6709 -153.7926)
06/03 05:24:41 2.20ml 44 km ENE of Pedro Bay, Alaska (59.9834 -153.4174)
06/03 05:19:17 1.86ml 6km WSW of Hermosa Beach, CA (33.8388 -118.4638)
06/03 04:56:20 2.15ml 16 km SW of Atka, Alaska (52.0805 -174.3617)
06/03 04:49:11 1.90md 19 km ESE of Naalehu, Hawaii (18.9745 -155.4258)
06/03 04:44:34 1.73ml Unimak Island region, Alaska (54.5770 -163.0487)
06/03 04:38:09 2.30ml 23 km NW of Central, Alaska (65.7179 -145.1762)
06/03 04:26:33 2.25ml Rat Islands, Aleutian Islands, Alaska (51.9205 178.3042)
06/03 03:47:23 2.07md 4 km ENE of La Parguera, Puerto Rico (17.9888 -67.0095)
06/03 02:48:08 4.30mb 169 km E of Kuril’sk, Russia (45.2862 150.0338)
06/03 01:46:15 2.23ml 27 km S of Saint George, Utah (36.8542 -113.5610)
06/03 01:37:45 2.93md 85 km SW of Pole Ojea, Puerto Rico (17.5018 -67.8230)
06/03 01:01:17 2.30ml 83 km NNW of Aleknagik, Alaska (59.9833 -159.0865)
06/03 00:59:09 2.40ml 23 km SSW of Susitna, Alaska (61.3660 -150.7588)
06/03 00:39:16 4.60mb 257 km S of ‘Ohonua, Tonga (-23.6522 -175.1827)
06/03 00:29:03 3.57md 121 km N of Charlotte Amalie, U.S. Virgin Islands (19.4265 -65.0761)
06/02 23:47:14 2.29ml 20 km N of Pāhala, Hawaii (19.3898 -155.4742)
06/02 23:39:34 2.20ml 6 km E of Pāhala, Hawaii (19.2065 -155.4203)
06/02 23:32:21 4.30mb 268 km E of Levuka, Fiji (-17.9483 -178.1542)
06/02 23:26:03 5.10mww 99 km SW of Nikolski, Alaska (52.3887 -170.0226)
06/02 23:13:23 2.10ml 35 km WSW of Mentone, Texas (31.6084 -103.9594)
The magnitude reported is that which the U.S. Geological Survey considers official for this earthquake, and was the best available estimate of the earthquake's size, at the time that this page was created. Other magnitudes associated with web pages linked from here are those determined at various times following the earthquake with different types of seismic data. Although they are legitimate estimates of magnitude, the U.S. Geological Survey does not consider them to be the preferred "official" magnitude for the event.
Earthquake magnitude is a measure of the size of an earthquake at its source. It is a logarithmic measure. At the same distance from the earthquake, the amplitude of the seismic waves from which the magnitude is determined are approximately 10 times as large during a magnitude 5 earthquake as during a magnitude 4 earthquake. The total amount of energy released by the earthquake usually goes up by a larger factor: for many commonly used magnitude types, the total energy of an average earthquake goes up by a factor of approximately 32 for each unit increase in magnitude.
There are various ways that magnitude may be calculated from seismograms. Different methods are effective for different sizes of earthquakes and different distances between the earthquake source and the recording station. The various magnitude types are generally defined so as to yield magnitude values that agree to within a few-tenths of a magnitude-unit for earthquakes in a middle range of recorded-earthquake sizes, but the various magnitude-types may have values that differ by more than a magnitude-unit for very large and very small earthquakes as well as for some specific classes of seismic source. This is because earthquakes are commonly complex events that release energy over a wide range of frequencies and at varying amounts as the faulting or rupture process occurs. The various types of magnitude measure different aspects of the seismic radiation (e.g., low-frequency energy vs. high-frequency energy). The relationship among values of different magnitude types that are assigned to a particular seismic event may enable the seismologist to better understand the processes at the focus of the seismic event. The various magnitude-types are not all available at the same time for a particular earthquake.
Preliminary magnitudes based on incomplete but rapidly-available data are sometimes estimated and reported. For example, the Tsunami Warning Centers will calculate a preliminary magnitude and location for an event as soon as sufficient data are available to make an estimate. In this case, time is of the essence in order to broadcast a warning if tsunami waves are likely to be generated by the event. Such preliminary magnitudes are superseded by improved estimates of magnitude as more data become available.
For large earthquakes of the present era, the magnitude that is ultimately selected as the preferred magnitude for reporting to the public is commonly a moment magnitude that is based on the scalar seismic-moment of an earthquake determined by calculation of the seismic moment-tensor that best accounts for the character of the seismic waves generated by the earthquake. The scalar seismic-moment, a parameter of the seismic moment-tensor, can also be estimated via the multiplicative product rigidity of faulted rock x area of fault rupture x average fault displacement during the earthquake.
Magnitude Type, Magnitude Range, Distance Range, Equation
Mww (Moment W-phase)(generic notation Mw) ~5.0 and larger 1 - 90 degrees MW = 2/3 * (log10(MO) - 16.1),where MO is the seismic moment.
Note this is also unit-dependent; the formula above is for moment in dyne-cm. If using metric units (N.m), the constant is 9.1. Derived from a centroid moment tensor inversion of the W-phase (~50-2000 s; pass band based on size of EQ). Computed for all M5.0 or larger earthquakes worldwide, but generally robust for all M5.5 worldwide. Provides consistent results to M~4.5 within a regional network of high-quality broadband stations. Authoritative USGS magnitude if computed.
--
Mwc (centroid) ~5.5 and larger 20 - 180 degrees MW = 2/3 * (log10(MO) - 16.1), where MO is the seismic moment.
Derived from a centroid moment tensor inversion of the long-period surface waves (~100-2000 s; pass band based on size of EQ). Generally computable for all M6.0 worldwide using primarily the Global Seismograph Network. Only authoritative if Mww is not computed, not published otherwise.
--
Mwb (body wave) ~5.5 to ~7.0 30 - 90 degrees MW = 2/3 * (log10(MO) - 16.1), where MO is the seismic moment.
Derived from moment tensor inversion of long-period (~20-200 s; pass band based on size of EQ) body-waves (P- and SH). Generally computable for all M5.5 or larger events worldwide. Source complexity at larger magnitudes (~M7.5 or greater) generally limits applicability. Only authoritative if Mww and Mwc are not computed.
--
Mwr (regional) ~4.0 to ~6.5 0 - 10 degrees MW = 2/3 * (log10(MO) - 16.1), where MO is the seismic moment.
Based on the scalar seismic-moment of the earthquake, derived from moment tensor inversion of the whole seismogram at regional distances (~10-100 s; pass band based on size of EQ). Source complexity and dimensions at larger magnitudes (~M7.0 or greater) generally limits applicability. Authoritative for <M5.0. Within the continental US and south-central Alaska where we have a large number of high quality broadband stations we expect we can compute an Mwr consistently for events as small as M4.0. In some areas of the country, with relatively dense broadband coverage, we can compute Mwr consistently to as small as M3.5.
--
Ms20 or Ms (20sec surface wave) ~5.0 to ~8.5 20 - 160 degrees MS = log10 (A/T) 1.66 log10 (D) 3.30 .i
A magnitude based on the amplitude of Rayleigh surface waves measured at a period near 20 sec. Waveforms are shaped to the WWSSN LP response. Reported by NEIC, but rarely used as authoritative, since at these magnitudes there is almost always an Mw available. Ms is primarily valuable for large (>6), shallow events, providing secondary confirmation on their size. Ms_20 tends to saturate at about M8.3 or larger.
--
mb (short-period body wave) ~4.0 to ~6.5 15 - 100 degrees mb = log10(A/T) Q(D,h) ,where A is the amplitude of ground motion (in microns); T is the corresponding period (in seconds); and Q(D,h) is a correction factor that is a function of distance, D(degrees), between epicenter and station and focal depth, h (in kilometers), of the earthquake.
Based on the amplitude of 1st arriving P-waves at periods of about 1 s. Waveforms are shaped to the WWSSN SP response. Reported for most M4.0-4.5 to 6.5 EQs that are observed teleseismically. Only authoritative for global seismicity for which there is no Mww, Mwc, Mwb or Mwr, typically 4.0-5.5 range. Mb tends to saturate at about M 6.5 or larger.
--
Mfa (felt-area magnitude) any any various
An estimate of body-wave (mb) magnitude based on the size of the area over which the earthquake was felt, typically assigned to widely felt earthquakes that occurred before the invention of seismographs and to earthquakes occurring in the early decades of seismograph deployment for which magnitudes calculated from seismographic data are not available. The computations are based on isoseismal maps or defined felt areas using various intensity-magnitude or felt area-magnitude formulas. Reference: Seismicity of the United States, 1568-1989 (Revised), by Carl W. Stover and Jerry L. Coffman, U.S. Geological Survey Professional Paper 1527, United States Government Printing Office, Washington: 1993.
--
ML Ml, or ml (local) ~2.0 to ~6.5 0 - 600 km
The original magnitude relationship defined by Richter and Gutenberg in 1935 for local earthquakes. It is based on the maximum amplitude of a seismogram recorded on a Wood-Anderson torsion seismograph. Although these instruments are no longer widely in use, ML values are calculated using modern instrumentation with appropriate adjustments. Reported by NEIC for all earthquakes in the US and Canada. Only authoritative for smaller events, typically M<4.0 for which there is no mb or moment magnitude. In the central and eastern United States, NEIC also computes ML, but restricts the distance range to 0-150 km. In that area it is only authoritative if there is no mb_Lg as well as no mb or moment magnitude.
--
mb_Lg, mb_lg, or MLg (short-period surface wave) ~3.5 to ~7.0 150-1110 km (10 degres)
A magnitude for regional earthquakes based on the amplitude of the Lg surface waves as recorded on short-period instruments. Only authoritative for smaller events in the central and eastern United States, typically <4.0 for which there is no mb or moment magnitude.
--
Md or md (duration) ~4 or smaller 0 - 400 km
Based on the duration of shaking as measured by the time decay of the amplitude of the seismogram. Sometimes the only magnitude available for very small events, but often used (especially in the past) to compute magnitude from seismograms with "clipped" waveforms due to limited dynamic recording range of analog instrumentation, which makes it impossible to measure peak amplitudes. Computed by NEIC but only published when there is no other magnitude available.
--
Mi or Mwp (integrated p-wave) ~5.0 to ~8.0 all
Based on an estimate of moment calculated from the integral of the displacement of the P wave recorded on broadband instruments.
--
Me (energy) ~3.5 and larger all Me = 2/3 log10E - 2.9,where E is the energy calculated by log10E = 11.8 1.5MS where energy, E, is expressed in ergs.
Based on the seismic energy radiated by the earthquake as estimated by integration of digital waveforms.
--
Mh any any N/A
Non-standard magnitude method. Generally used when standard methods will not work. Sometimes use as a temporary designation until the magnitude is finalized.
--
Finite Fault Modeling ~7.0 and larger 30 - 90 degrees
FFM modeling provides a kinematic description of faulting including estimates of maximum slip, area of rupture and moment release as a function of time. Results are used to provide constraints on fault dimensions and slip used in damage assessment modeling (ShakeMap, PAGER) and to model stress changes (Coulomb stress modeling) on the active fault and/or adjacent faults.
--
Mint (intensity magnitude) any any various
A magnitude estimated from the maximum reported intensity, typically for earthquakes occurring before seismic instruments were in general use. This has been used for events where the felt reports were from too few places to use a magnitude determined from a felt area. Reference: Catalog of Hawaiian earthquakes, 1823-1959, by Fred W. Klein and Thomas L. Wright U.S. Geological Survey Professional Paper 1623, USGS Information Services, Denver: 2000.
