💾 Archived View for nox.im › snippets › ubuntu-expose-service-behind-reverse-proxy captured on 2022-06-03 at 23:01:41. Gemini links have been rewritten to link to archived content
-=-=-=-=-=-=-
Install Nginx for our reverse proxy setup:
apt-get install -y nginx
Start the service and ensure it starts on reboot:
systemctl start nginx systemctl enable nginx
We can test this by hitting our box now with a web browser. If it works we'll setup basic auth first on the `/etc/nginx/sites-available/default` site which is located under:
root /var/www/html;
Create an htpasswd file with OpenSSL
echo "someuser:$(openssl passwd -crypt somepass)" > /etc/nginx/conf.d/.htpasswd
And reference it in the config:
server {
# ...
location / {
# ...
auth_basic "closed site";
auth_basic_user_file /etc/nginx/conf.d/.htpasswd;
}
}
Check if the config is good, and if so reload it:
sudo nginx -t sudo nginx -s reload
Nginx with basic authentication should now be working. We'll reuse this setup in the reverse proxy section below.
By default our services would be exposed on their native ports, not just through the reverse proxy. For extra security we'll want to lock down the server to just Nginx. Setup ufw and ensure the SSH port is open **BEFORE** enabling it.
sudo ufw allow ssh sudo ufw allow 80/tcp sudo ufw allow 443/tcp sudo ufw enable
We can view rules:
ufw status numbered
Status: active
To Action From
--
[ 1] 22/tcp ALLOW IN Anywhere
[ 2] 80/tcp ALLOW IN Anywhere
[ 3] 8080/tcp ALLOW IN Anywhere
[ 4] 22/tcp (v6) ALLOW IN Anywhere (v6)
[ 5] 80/tcp (v6) ALLOW IN Anywhere (v6)
[ 6] 8080/tcp (v6) ALLOW IN Anywhere (v6)
and delete a rule with:
sudo ufw delete 6
Create a systemd service file
touch /etc/systemd/system/solana-test-validator.service chmod 664 /etc/systemd/system/solana-test-validator.service
point the service file to your binary, here it's the Solana test validator from my Raspberry Pi post[1]:
1: test validator from my Raspberry Pi post
[Unit] Description=Solana Test Validator [Service] Restart=always ExecStart=/usr/local/bin/solana-test-validator --ledger /var/db/solana/test-ledger [Install] WantedBy=multi-user.target
Reload the service files and start our new service
systemctl daemon-reload systemctl start solana-test-validator systemctl status solana-test-validator
if ok, enable so it survives a reboot
systemctl enable solana-test-validator
Our service may produce log files. In order to not run out of disk space, we'll add a logrotate onto the file:
vim /etc/logrotate.d/solana
With zero days retention, running hourly if the file is not empty.
/var/local/solana-test-ledger/validator-*.log {
hourly
missingok
rotate 1
copytruncate
notifempty
}
In this case, the log files look as follows:
ls -lh /var/local/solana-test-ledger/*.log -rw-r--r-- 1 root staff 550M Mar 10 08:37 /var/local/solana-test-ledger/validator-1646890477927.log -rw-r--r-- 1 root staff 278M Mar 10 10:51 /var/local/solana-test-ledger/validator-1646903838680.log -rw-r--r-- 1 root staff 543M Mar 10 14:01 /var/local/solana-test-ledger/validator-1646909768151.log lrwxrwxrwx 1 root staff 27 Mar 10 10:56 /var/local/solana-test-ledger/validator.log -> validator-1646909768151.log
If we deal with a service that doesn't close their log files on SIGHUB and doesn't rotate the files by itself as it is the case here, we can use the `copytruncate` option.
You can test this by running logrotate manually:
logrotate --force /etc/logrotate.d/solana
Note that usually logrotate is configured to be run by cron daily. To run logrotate hourly copy the file `/etc/cron.daily/logrotate` into the `/etc/cron.hourly/` directory.
Create and enable a new Nginx "site" called "reverse-proxy":
touch /etc/nginx/sites-available/reverse-proxy ln -s /etc/nginx/sites-available/reverse-proxy /etc/nginx/sites-enabled/reverse-proxy vim /etc/nginx/sites-available/reverse-proxy
Link an upstream service, the one we want to expose through the reverse proxy and a server section with the proxy_pass and the basic authentication configuration from above:
upstream myservice {
server 127.0.0.1:8081;
}
server {
listen 8080;
server_name _;
location / {
proxy_pass http://myservice;
auth_basic "closed site";
auth_basic_user_file /etc/nginx/conf.d/.htpasswd;
}
}
Note that you can have multiple upstream and multiple server blocks.
sudo nginx -t nginx: the configuration file /etc/nginx/nginx.conf syntax is ok nginx: configuration file /etc/nginx/nginx.conf test is successful
Everything seems to be good, let's reload nginx:
sudo systemctl reload nginx
Enjoy, we're done!