💾 Archived View for ait.place › dot › bin › .local › bin › dmount.txt captured on 2022-06-03 at 22:56:12.

View Raw

More Information

⬅️ Previous capture (2021-12-03)

-=-=-=-=-=-=-

#!/bin/sh

# Gives a dmenu prompt to mount unmounted drives and Android phones. If
# they're in /etc/fstab, they'll be mounted automatically. Otherwise, you'll
# be prompted to give a mountpoint from already existsing directories. If you
# input a novel directory, it will prompt you to create that directory.

getmount() { \
	[ -z "$chosen" ] && exit 1
	mp="$(find $1 2>/dev/null | dmenu -i -p "Type in mount point.")"
	[ "$mp" = "" ] && exit 1
	if [ ! -d "$mp" ]; then
		mkdiryn=$(printf "No\\nYes" | dmenu -i -p "$mp does not exist. Create it?")
		[ "$mkdiryn" = "Yes" ] && (mkdir -p "$mp" || sudo -A mkdir -p "$mp")
	fi
	}

mountusb() { \
	chosen="$(echo "$usbdrives" | dmenu -i -p "Mount which drive?")" || exit 0
	chosen="${chosen%% *}"
	sudo -A mount "$chosen" 2>/dev/null && notify-send "💻 USB mounting" "$chosen mounted." && exit 0
	alreadymounted=$(lsblk -nrpo "name,type,mountpoint" | awk '$2=="part"&&$3!~/\/boot|\/home$|SWAP/&&length($3)>1{printf "-not \\( -path *%s -prune \\) \\ \n",$3}')
	getmount "/mnt /media /mount /home -maxdepth 5 -type d $alreadymounted"
	partitiontype="$(lsblk -no "fstype" "$chosen")"
	case "$partitiontype" in
		"vfat") sudo -A mount -t vfat "$chosen" "$mp" -o rw,umask=0000;;
		*) sudo -A mount "$chosen" "$mp"; user="$(whoami)"; ug="$(groups | awk '{print $1}')"; sudo -A chown "$user":"$ug" "$mp";;
	esac
	notify-send "💻 USB mounting" "$chosen mounted to $mp."
	}

mountandroid() { \
	chosen=$(echo "$anddrives" | dmenu -i -p "Which Android device?" | cut -d : -f 1)
	getmount "$HOME -maxdepth 3 -type d"
        simple-mtpfs --device "$chosen" "$mp"
	echo "OK" | dmenu -i -p "Tap Allow on your phone if it asks for permission and then press enter"
	simple-mtpfs --device "$chosen" "$mp"
	notify-send "🤖 Android Mounting" "Android device mounted to $mp."
	}

asktype() { \
	case $(printf "USB\\nAndroid" | dmenu -i -p "Mount a USB drive or Android device?") in
		USB) mountusb ;;
		Android) mountandroid ;;
	esac
	}

anddrives=$(simple-mtpfs -l 2>/dev/null)
usbdrives="$(lsblk -rpo "name,type,size,mountpoint" | awk '$2=="part"&&$4==""{printf "%s (%s)\n",$1,$3}')"

if [ -z "$usbdrives" ]; then
	[ -z "$anddrives" ] && echo "No USB drive or Android device detected" && exit
	echo "Android device(s) detected."
	mountandroid
else
	if [ -z "$anddrives" ]; then
		echo "USB drive(s) detected."
		mountusb
	else
		echo "Mountable USB drive(s) and Android device(s) detected."
		asktype
	fi
fi