💾 Archived View for perso.pw › blog › articles › freebsd-workstation.gmi captured on 2022-04-29 at 12:27:59. Gemini links have been rewritten to link to archived content

View Raw

More Information

⬅️ Previous capture (2021-12-17)

➡️ Next capture (2023-01-29)

-=-=-=-=-=-=-

FreeBSD 12.1 on a laptop

NIL=> Comment on Mastodon

Introduction

I'm using FreeBSD again on a laptop for some reasons so expect to read more

about FreeBSD here. This tutorial explain how to get a graphical desktop using

FreeBSD 12.1.

I used a Lenovo Thinkpad T480 for this tutorial.

Intel graphics hardware support

If you have a recent Intel integrated graphic card (maybe less than 3 years),

you have to install a package containing the driver:

pkg install drm-kmod

and you also have to tell the system the correct path of the module (because

another i915kms.ko file exist):

sysrc kld_list="/boot/modules/i915kms.ko"

Choose your desktop environnement

Install Xfce

pkg install xfce

Then in your user `~/.xsession` file you must append:

exec ck-launch-session startxfce4

Install MATE

pkg install mate

Then in your user `~/.xsession` file you must append:

exec ck-launch-session mate-session

Install KDE5

pkg install kde5

Then in your user `~/.xsession` file you must append:

exec ck-launch-session startplasma-x11

Setting up the graphical interface

You have to enable a few services to have a working graphical session:

- **moused** to get laptop mouse support

- **dbus** for hald

- **hald** for hardware detection

- **xdm** for display manager where you log-in

You can install them with the command:

pkg install xorg dbus hal xdm

Then you can enable the services at boot using the following commands, order is

important:

sysrc moused_enable="yes"

sysrc dbus_enable="yes"

sysrc hald_enable="yes"

sysrc xdm_enable="yes"

Reboot or start the services in the same order:

service moused start

service dbus start

service hald start

service xdm start

Power management

The installer should have prompted for the service powerd, if you didn't

activate it at this time, you can still enable it.

Check if it's running

service powerd status

Enabling

sysrc powerd_enable="yes"

Starting the service

service powerd start

Webcam support

If you have a webcam and want to use it, some configuration is required in

order to make it work.

Install the package webcamd, it will displays all the instructions written

below at the install step.

pkg install webcamd

From here, append this line to the file `/boot/loader.conf` to load webcam

support at boot time:

cuse_load="yes"

Add your user to the webcamd group so it will be able to use the device:

pw groupmod webcamd -m YOUR_USER

Enable webcamd at boot:

sysrc webcamd_enable="yes"

Now, you have to logout from your user for the group change to take place. And

if you want the webcamd daemon to work now and not wait next reboot:

kldload cuse

service webcamd start

service devd restart

You should have a /dev/video0 device now. You can test it easily with the

package `pwcview`.

External resources

I found this blog very interesting, I wish I found it before I struggle with

all the configuration as it explains how to install FreeBSD on the exact same

laptop. The author explains how to make a transparent lagg0 interface for

switching from ethernet to wifi automatically with a failover pseudo device.

[https://genneko.github.io/playing-with-bsd/hardware/freebsd-on-thinkpad-t480/](https://genneko.github.io/playing-with-bsd/hardware/freebsd-on-thinkpad-t480/)