💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc5324.txt captured on 2022-04-28 at 21:24:21.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Network Working Group C. DeSanti
Request for Comments: 5324 F. Maino
Category: Standards Track K. McCloghrie
Cisco Systems
September 2008
MIB for Fibre-Channel Security Protocols (FC-SP)
Status of This Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Abstract
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
In particular, it describes managed objects for information related
to FC-SP, the Security Protocols defined for Fibre Channel.
Table of Contents
1. Introduction ....................................................3
2. The Internet-Standard Management Framework ......................3
3. Overview of Fibre Channel .......................................3
3.1. Introduction ...............................................3
3.2. Zoning .....................................................4
3.3. Virtual Fabrics ............................................5
3.4. Security ...................................................5
3.4.1. Authentication ......................................5
3.4.2. Security Associations ...............................6
3.4.3. Fabric Security Policies ............................7
3.4.4. Policy Model ........................................8
3.4.5. Policy Objects ......................................9
3.4.5.1. Policy Object Names .......................10
3.4.6. Three Kinds of Switches ............................10
3.4.7. Security Policy Management .........................11
3.4.8. FC-SP Zoning .......................................11
4. Document Overview ..............................................12
4.1. Fibre Channel Management Instance .........................12
4.2. Entity Name ...............................................12
4.3. Fabric Index ..............................................13
4.4. Interface Index ...........................................13
4.5. Syntax for Policy Object Names ............................14
De Santi, et al. Standards Track [Page 1]
RFC 5324 MIB for FC-SP September 2008
4.6. Certificates, CAs, and CRLs ...............................14
4.7. Traffic Selectors .........................................15
4.8. The MIB Modules ...........................................16
4.8.1. The T11-FC-SP-TC-MIB Module ........................16
4.8.2. The T11-FC-SP-AUTHENTICATION-MIB Module ............16
4.8.3. The T11-FC-SP-ZONING-MIB Module ....................16
4.8.4. The T11-FC-SP-POLICY-MIB Module ....................17
4.8.5. The T11-FC-SP-SA-MIB Module ........................17
4.9. Rate Control for Notifications ............................18
5. Relationship to Other MIB Modules ..............................19
6. MIB Module Definitions .........................................20
6.1. The T11-FC-SP-TC-MIB Module ...............................20
6.2. The T11-FC-SP-AUTHENTICATION-MIB Module ...................33
6.3. The T11-FC-SP-ZONING-MIB Module ...........................52
6.4. The T11-FC-SP-POLICY-MIB Module ...........................64
6.5. The T11-FC-SP-SA-MIB Module ..............................152
7. IANA Considerations ...........................................204
8. Security Considerations .......................................204
8.1. Information Not Defined in This Document .................204
8.2. The T11-FC-SP-TC-MIB Module ..............................204
8.3. The T11-FC-SP-AUTHENTICATION-MIB Module ..................205
8.4. The T11-FC-SP-ZONING-MIB Module ..........................206
8.5. The T11-FC-SP-POLICY-MIB Module ..........................207
8.6. The T11-FC-SP-SA-MIB Module ..............................209
8.7. Recommendations Common to All MIB Modules ................211
9. Normative References ..........................................212
10. Informative References .......................................213
11. Acknowledgements .............................................215
De Santi, et al. Standards Track [Page 2]
RFC 5324 MIB for FC-SP September 2008
1. Introduction
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
In particular, it describes managed objects for information
concerning the Fibre Channel Security Protocols (FC-SP), as specified
in [FC-SP]. The FC-SP standard includes the definition of protocols
to authenticate Fibre Channel entities, protocols to set up session
keys, protocols to negotiate the parameters required to ensure frame-
by-frame integrity and confidentiality, and protocols to establish
and distribute policies across a Fibre Channel Fabric.
This memo was initially developed by the INCITS T11 committee
(http://www.t11.org), which subsequently approved it for forwarding
to the IETF.
This memo uses one of the following terms:
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in BCP 14, RFC 2119
[RFC2119].
2. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base, or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579], and STD 58, RFC 2580
[RFC2580].
3. Overview of Fibre Channel
3.1. Introduction
Fibre Channel (FC) is logically a bidirectional point-to-point serial
data channel, structured for high performance. Fibre Channel
provides a general transport vehicle for higher-level protocols such
as Small Computer System Interface (SCSI) command sets, the High-
Performance Parallel Interface (HIPPI) data framing, IP (Internet
Protocol), IEEE 802.2, and others.
De Santi, et al. Standards Track [Page 3]
RFC 5324 MIB for FC-SP September 2008
Physically, Fibre Channel is an interconnection of multiple
communication points, called N_Ports, interconnected either by a
switching network, called a Fabric, or by a point-to-point link. A
Fibre Channel "Node" consists of one or more N_Ports. A Fabric may
consist of multiple Interconnect Elements, some of which are
Switches. An N_Port connects to the Fabric via a port on a Switch
called an F_Port. When multiple FC Nodes are connected to a single
port on a Switch via an "Arbitrated Loop" topology, the Switch port
is called an FL_Port, and the Nodes' ports are called NL_Ports. The
term Nx_Port is used to refer to either an N_Port or an NL_Port. The
term Fx_Port is used to refer to either an F_Port or an FL_Port. A
Switch port, which is interconnected to another Switch port via an
Inter-Switch Link (ISL), is called an E_Port. A B_Port connects a
bridge device with an E_Port on a Switch; a B_Port provides a subset
of E_Port functionality.
Many Fibre Channel components, including the Fabric, each Node, and
most ports, have globally unique names. These globally unique names
are typically formatted as World Wide Names (WWNs). More information
on WWNs can be found in [FC-FS-2]. WWNs are expected to be
persistent across agent and unit resets.
Fibre Channel frames contain 24-bit address identifiers that identify
the frame's source and destination ports. Each FC port has both an
address identifier and a WWN. When a Fabric is in use, the FC
address identifiers are dynamic and are assigned by a Switch. Each
octet of a 24-bit address represents a level in an address hierarchy,
with a Domain_ID being the highest level of the hierarchy.
3.2. Zoning
Zones within a Fabric provide a mechanism to control frame delivery
between Nx_Ports ("Hard Zoning") or to expose selected views of Name
Server information ("Soft Zoning").
Communication is only possible when the communicating endpoints are
members of a common zone. This technique is similar to virtual
private networks in that the Fabric has the ability to group devices
into Zones.
Hard zoning and soft zoning are two different means of realizing
this. Hard zoning is enforced in the Fabric (i.e., Switches),
whereas soft zoning is enforced at the endpoints (e.g., Host Bus
Adapters) by relying on the endpoints to not send traffic to an
N_Port_ID not obtained from the Name Server with a few exceptions for
well known Addresses (e.g., the Name Server).
De Santi, et al. Standards Track [Page 4]
RFC 5324 MIB for FC-SP September 2008
Administrators create Zones to increase network security, and prevent
data loss or corruption, by controlling access between devices or
user groups.
3.3. Virtual Fabrics
The standard for an interconnecting Fabric containing multiple Fabric
Switch elements is [FC-SW-4]. [FC-SW-4] carries forward the earlier
specification for the operation of a single Fabric in a physical
infrastructure, and augments it with the definition of Virtual
Fabrics and with the specification of how multiple Virtual Fabrics
can operate within one or more physical infrastructures. The use of
Virtual Fabrics provides for each frame to be tagged in its header to
indicate which one of several Virtual Fabrics that frame is being
transmitted on. All frames entering a particular "Core Switch"
[FC-SW-4] (i.e., a physical Switch) on the same Virtual Fabric are
processed by the same "Virtual Switch" within that Core Switch.
3.4. Security
The Fibre Channel Security Protocols (FC-SP) standard [FC-SP]
describes the protocols used to implement security in a Fibre Channel
Fabric, including the definition of:
- protocols to authenticate Fibre Channel entities,
- protocols to set up session keys,
- protocols to negotiate the parameters required to ensure frame-
by-frame integrity and confidentiality, and
- protocols to establish and distribute (security) policies across
a Fibre Channel Fabric.
3.4.1. Authentication
Two entities may negotiate whether authentication is required and
which Authentication Protocol is to be used. Authentication can be
used in Switch-to-Switch, Node-to-Switch, and Node-to-Node
communication. The defined Authentication Protocols are able to
perform mutual authentication with optional shared key establishment.
The shared key computed at the end of an Authentication Transaction
may be used to establish Security Associations.
De Santi, et al. Standards Track [Page 5]
RFC 5324 MIB for FC-SP September 2008
The Fabric security architecture is defined for several
authentication infrastructures. Secret-based, certificate-based, and
password-based authentication infrastructures are accommodated.
Specific authentication protocols that directly leverage these three
authentication infrastructures are defined.
With a secret-based infrastructure, entities within the Fabric
environment that establish a security relationship share a common
secret or centralize the secret administration in an external (e.g.,
RADIUS [RFC2865], Diameter [RFC3588], or Terminal Access Controller
Access Control System (TACACS) [RFC1492]) server. Entities may
mutually authenticate with other entities by using the Diffie-Hellman
Challenge Handshake Authentication Protocol (DH-CHAP) [FC-SP].
Security Associations may be set up using the session key computed at
the end of the DH-CHAP transaction.
With a certificate-based infrastructure, entities within the Fabric
environment are certified by a trusted Certificate Authority (CA).
The resulting certificates bind each entity to a public-private key
pair that may be used to mutually authenticate with other certified
entities via the Fibre Channel Certificate Authentication Protocol
(FCAP) [FC-SP]. Security Associations may be set up by using these
entity certificates and associated keys or by using the session key
computed at the end of the FCAP transaction.
With a password-based infrastructure, entities within the Fabric
environment that establish a security relationship have knowledge of
the password-based credential material of other entities. Entities
may use this credential material to mutually authenticate with other
entities using the Fibre Channel Password Authentication Protocol
(FCPAP) [FC-SP]. Security Associations may be set up using the
session key computed at the end of the FCPAP transaction.
In addition to DH-CHAP, FCAP, and FCPAP, one other Authentication
Protocol is defined: Internet Key Exchange Protocol version 2-AUTH
(IKEv2-AUTH), which refers to the use of an SA Management Transaction
of the Security Association Management Protocol (see below) to
perform two functions: not only SA management but also
authentication. The credentials used in an IKEv2-AUTH transaction
are either strong shared secrets or certificates.
3.4.2. Security Associations
A subset of the IKEv2 protocol [RFC4306] suitable for Fibre Channel
is defined as the (Fibre Channel) Security Association Management
protocol [RFC4595]. This protocol -- which is *not* IPsec --
provides the means to establish Security Associations (SAs) between
Fibre Channel entities. Traffic Selectors are defined to specify
De Santi, et al. Standards Track [Page 6]
RFC 5324 MIB for FC-SP September 2008
which type of traffic has to be protected by which SA, and what the
characteristics of the protection are. Two mechanisms are available
to protect specific classes of traffic:
- ESP_Header is used to protect FC-2 frames (see [FC-FS-2] and the
conceptually similar mechanisms in [RFC4303]), and
- CT_Authentication is used to protect CT_IUs (Common Transport
Information Units) [FC-GS-5].
An entity protecting specific classes of traffic maintains an
internal Security Association Database (SADB) that contains the
currently active Security Associations and Traffic Selectors.
Each active SA has a Security Association entry in the SADB. Each SA
entry includes the SA's SPI (the Security Parameters Index, which is
included in frames transmitted on the SA), a Sequence Number counter,
and the parameters for the selected transforms (e.g., encryption
algorithm, integrity algorithm, mode of operation of the algorithms,
keys).
Each active Traffic Selector has an entry in the SADB that indicates
whether it is used for ingress traffic or for egress traffic. These
Traffic Selector entries are ordered such that they are searched
(when checking for a match) in the given order. Two types of Traffic
Selector entries may be present:
- Traffic Selector entries identifying FC-2 frames or CT_IUs to be
bypassed or discarded; and
- Traffic Selector entries identifying FC-2 frames or CT_IUs to be
protected or verified. These entries point to the corresponding
SA entry defining the parameters and the security processing to
be performed.
SAs are unidirectional, but they always exist as an SA pair of the
same type, one in each direction.
3.4.3. Fabric Security Policies
Two separate approaches to defining Policies are adopted in FC-SP,
but both approaches follow the same general concept for their Policy
model. One is the definition of a Policy Model for Fabric Policies
that focus on Security. These Security Policies specify the
membership and connectivity allowed within a Fabric, and also which
IP hosts are allowed to manage a Fabric.
De Santi, et al. Standards Track [Page 7]
RFC 5324 MIB for FC-SP September 2008
The other approach is to define a variant of the Enhanced Zoning
model defined in [FC-SW-4] and [FC-GS-5], such that the variant
specifies extensions for use in a secure environment. This variant
of Zoning, denoted as "FC-SP Zoning", follows the same general
concepts of the Policy model for Security Policies, but keeps Zoning
management and enforcement completely independent from the management
and enforcement of other policies.
3.4.4. Policy Model
Figure 25 of [FC-SP] depicts FC-SP's policy management model like
this:
***** ************************
* * * Policy * *********************
* M * Add, * Configuration * * Policy *
* A * Get, * Entity * * Enforcement *
* N * Remove * * * Entity *
* A * Policy * +----------------+ * * *
* G * Objects * | Non-Active | * * +-------------+ *
* I *<-------->* | Policy Objects |==*====*=>| Active | *
* N * * +----------------+ * * | Policy | *
* G * ************************ * | Objects | *
* * * +-------------+ *
* * Activate Policy Summary * *
* E *=====================================>* +-------------+ *
* N * Deactivate Policy Summary * | Policy | *
* T *=====================================>* | Summary | *
* I * * | Object | *
* T * Get Policy Summary * +-------------+ *
* Y *<-------------------------------------* *
* * Get Policy Objects * *
* *<-------------------------------------* *
***** *********************
Note that the arrows in the picture above are used to indicate the
movement of "data", rather than the direction of "messages", e.g.,
for a "Get" (with no data) in one direction which invokes a
"Response" (typically with data) in the reverse direction, the
diagram has arrows only for the "with data" direction.
De Santi, et al. Standards Track [Page 8]
RFC 5324 MIB for FC-SP September 2008
3.4.5. Policy Objects
The Policies to be enforced by a Fabric are specified in a set of
Policy Objects. The various types of Policy Objects are:
- The Policy Summary Object is a list of pointers to other Policy
Objects, one pointer per each other active Policy Object. Each
pointer in a Policy Summary Object is paired with a
cryptographic hash of the referenced Policy Object.
- The Switch Membership List Object is a Fabric-wide Policy Object
that defines which Switches are allowed to be part of a Fabric.
- The Node Membership List Object is a Fabric-wide Policy Object
that defines which Nodes are allowed to be connected to a
Fabric.
- The IP Management List Object is a Fabric-wide Policy Object
that describes which IP hosts are allowed to manage a Fabric.
- A Switch Connectivity Object is a per-Switch Policy Object that
describes the topology restrictions for a specific Switch; it
specifies the other Switches or Nodes to which the particular
Switch may be connected at the Node level and/or at the Port
level.
- Attribute Objects are Fabric-wide Policy Objects that define
optional attributes to be associated with Switches or Nodes.
They allow the extension of this policy model by defining new
attributes as required.
Note that the administratively specified name for a Fabric is
contained in the Switch Membership List Object (not in the Policy
Summary Object).
When FC-SP is in use, each Fabric has a set of active Policy Objects:
- one Policy Summary Object,
- one Switch Membership List Object,
- one Node Membership List Object,
- one IP Management List Object,
- zero or more Switch Connectivity Objects, and
- zero or more Attribute Objects.
De Santi, et al. Standards Track [Page 9]
RFC 5324 MIB for FC-SP September 2008
The active Policy Objects specify the Policies currently being
enforced. In addition, policies not currently being enforced are
contained in non-active Policy Objects. To change the active Policy
Objects, the non-active Policy Objects are edited as necessary and a
new Policy Summary Object that includes/references the changed Policy
Objects is activated.
3.4.5.1. Policy Object Names
Every Policy Object has a name. In a Fabric's database of Policy
Objects, a Policy Object Name is specified as a type/length/value
(see section 7.2 of [FC-SP]). The possible types are:
- Node_Name
- Restricted Node_Name
- Port_Name
- Restricted Port_Name
- Wildcard
- Negated Wildcard
- Alphanumeric Name
- IPv6 Address Range
- IPv4 Address Range
3.4.6. Three Kinds of Switches
For a Fabric composed of n Switches and m Nodes, the potential
complexity of Switch Connectivity Objects is O(n**2) to describe
Switch to Switch connections, and O(n*m) for Switch to Node
connections. To provide better scaling, the Switch Connectivity
Objects are not Fabric-wide information, but are distributed only to
where they are needed. To support this, the policy model supports
three kinds of Switches in a Fabric:
- Server Switches, which maintain the Fabric-wide Policy Objects,
all the Switch Connectivity Objects, and a full copy of the FC-
SP Zoning Database;
- Autonomous Switches, which maintain the Fabric-wide Policy
Objects, their own Switch Connectivity Object, and a full copy
of the FC-SP Zoning Database; and
De Santi, et al. Standards Track [Page 10]
RFC 5324 MIB for FC-SP September 2008
- Client Switches, which maintain the Fabric-wide Policy Objects,
their own Switch Connectivity Object, and a subset of the FC-SP
Active Zone Set (which is the configurations of zones currently
being enforced by a Fabric, see section 10.4.3.3 of [FC-SW-4]).
3.4.7. Security Policy Management
Security Policy can be changed in a server session [FC-GS-5] with a
Security Policy Server. All write access to a Security Policy Server
occurs within a server session. While read access to a Security
Policy Server may occur at any time, the consistency of the returned
data is guaranteed only inside a server session.
The Enhanced Commit Service [FC-SW-4] is used to perform Fabric
operations as and when necessary (see table 144 of [FC-SP]). Many of
these operations are named as if they were acronyms, e.g., SSB for
Server Session Begin; SSE for Server Session End; SW_ILS for Switch
Fabric Internal Link Services; EACA for Enhanced Acquire Change
Authorization; ERCA for Enhanced Release Change Authorization; SFC
for Stage Fabric Configuration.
Each server session begins and ends, with a SSB request and a SSE
request respectively, sent to a Security Policy Server. In the
Fabric, the SSB requests a lock of the Fabric via an EACA SW_ILS,
while the SSE requests a release of the lock via the ERCA SW_ILS
[FC-SW-4]. Active and non-active Policy Objects are persistent in
that they survive after the end of a server session.
3.4.8. FC-SP Zoning
To preserve backward compatibility with existing Zoning definitions
and implementations, FC-SP Zoning is defined as a variant of the
Enhanced Zoning model defined in [FC-SW-4] and [FC-GS-5] that follows
the general concepts of the Policy model for Security Policy
Management, but keeps Zoning management and enforcement completely
independent.
FC-SP Zoning allows for some Switches to retain less than a complete
replicated copy of the Zoning Database, as follows:
- Server Switches maintain the policies data structures for all
Switches in the Fabric plus a replica of the Zoning data
structures;
- Autonomous Switches maintain only the subset of policies data
structures relevant for their operations plus a replica of the
Zoning Database; and
De Santi, et al. Standards Track [Page 11]
RFC 5324 MIB for FC-SP September 2008
- Client Switches maintain only the subset of policies data
structures and the subset of the Active Zone Set relevant for
their operations.
When Client Switches are deployed in a Fabric, at least one Server
Switch must also be deployed in the same Fabric. A client-server
protocol allows Client Switches to dynamically retrieve the Zoning
information they may require from the Server Switches.
A management application manages the Fabric Zoning configuration
through the Fabric Zone Server, while other policies are managed
through the Security Policy Server. A new Zoning Check Protocol
replaces the Zone Merge Protocol [FC-SW-4], and new command codes are
defined for the SFC SW_ILS to distribute the FC-SP Zoning
configuration on a Fabric. The Zoning definitions are ordered to
allow for the computation of a hash of the Active Zone Set and a hash
of the Zone Set Database, plus other optional security data (e.g.,
for integrity protection of Zoning information).
4. Document Overview
This document defines five MIB modules that together provide the
means for monitoring the operation of, and configuring some
parameters of, one or more instances of the FC-SP protocols.
4.1. Fibre Channel Management Instance
A Fibre Channel management instance is defined in [RFC4044] as a
separable managed instance of Fibre Channel functionality. Fibre
Channel functionality may be grouped into Fibre Channel management
instances in whatever way is most convenient for the
implementation(s). For example, one such grouping accommodates a
single SNMP agent having multiple AgentX [RFC2741] sub-agents, with
each sub-agent implementing a different Fibre Channel management
instance.
The object, fcmInstanceIndex, is IMPORTed from the FC-MGMT-MIB
[RFC4044] as the index value to uniquely identify each Fibre Channel
management instance, for example, within the same SNMP context
([RFC3411] section 3.3.1).
4.2. Entity Name
A central capability of FC-SP is the use of an Authentication
Protocol. The purpose of each of the possible Authentication
Protocols is to allow a Fibre Channel entity to be assured of the
identity of each entity with which it is communicating. Examples of
such entities are Fibre Channel Switches and Fibre Channel Nx_Ports.
De Santi, et al. Standards Track [Page 12]
RFC 5324 MIB for FC-SP September 2008
Each entity is identified by a name. The FC-MGMT-MIB [RFC4044]
defines MIB objects for such names:
- for entities that are Fibre Channel Switches, the definition of
a Fibre Channel management instance allows multiple Switches to
be managed by the same Fibre Channel management instance. In
this case, each entity is a Switch and has the name given by the
MIB object, fcmSwitchWWN.
- for entities other than Fibre Channel Switches, a Fibre Channel
management instance can manage only one entity, and the name of
the entity is given by the MIB object, fcmInstanceWwn.
4.3. Fabric Index
With multiple Fabrics, each Fabric has its own instances of the
Fabric-related management instrumentation. Thus, these MIB modules
define all Fabric-related information in tables that are INDEX-ed by
an arbitrary integer, named a "Fabric Index". The syntax of a Fabric
Index is T11FabricIndex, imported from T11-TC-MIB [RFC4439]. When a
device is connected to a single physical Fabric, without use of any
virtual Fabrics, the value of this Fabric Index will always be 1. In
an environment of multiple virtual and/or physical Fabrics, this
index provides a means to distinguish one Fabric from another.
4.4. Interface Index
Several of the MIB modules defined in this document use the
InterfaceIndexOrZero syntax in order to allow information to be
specified/instantiated on a per-port/interface basis, e.g., for:
statistics, Traffic Selectors, Security Associations, etc. This
allows the same object to be used either when there is a separate row
for each of multiple ports/interfaces, or when multiple interfaces
are represented by a single row. The use of a zero value supports
the simpler cases of: a) when there is only one port/interface, b)
where the implementation chooses to aggregate the information for
multiple ports/interfaces. The minimum (for compliance) requirement
is to implement any one of the above cases.
When a Fabric Index and an object with the InterfaceIndexOrZero
syntax are used together in a single INDEX clause, the
InterfaceIndexOrZero object is listed before the Fabric Index in
order to simplify management queries that retrieve information
concerning multiple Fabrics connected to the same port/interface.
De Santi, et al. Standards Track [Page 13]
RFC 5324 MIB for FC-SP September 2008
4.5. Syntax for Policy Object Names
T11FcSpPolicyNameType and T11FcSpPolicyName are two Textual
Conventions defined in this document (in the T11-FC-SP-TC-MIB module)
to represent the types and values of Policy Object Names (see section
3.4.5.1 above). However, two of the nine possible types are IPv4
Address Range and IPv6 Address Range. It is standard practice in MIB
modules to represent all IP addresses using the standard Textual
Conventions defined in [RFC4001] for IP addresses: specifically,
InetAddressType and InetAddress. This document adheres to such
standard practice to the following extent:
- for MIB objects representing a Policy Object Name that can
*only* be an IPv4 Address Range or an IPv6 Address Range, then
those MIB objects are defined as a 3-tuple: (InetAddressType,
InetAddress, InetAddress), in which the first address is the low
end of the range, the second address is the high end of the
range, and both addresses are of the type given by
InetAddressType.
- for MIB objects representing a Policy Object Name that is
(possibly) of a different type, i.e., it is not (necessarily) an
IPv4 or IPv6 Address Range, then those MIB objects are defined
as a 2-tuple: (T11FcSpPolicyNameType, T11FcSpPolicyName), in
which the first object represents the type of Policy Object Name
and the second object represents the value of the Policy Object
Name. For MIB objects defined in this manner, if and when they
represent a range of IP addresses: a) the value of
T11FcSpPolicyNameType differentiates between an IPv4 Address
Range and an IPv6 Address Range; and b) the value of
T11FcSpPolicyName is one string containing the concatenation of
the two addresses that are the low and high addresses of the
range. This is the same format as used within FC-SP Policy
Objects [FC-SP].
4.6. Certificates, CAs, and CRLs
In order to authenticate with the FCAP protocol, each entity,
identified by a unique Name, is provided with: a digital certificate
associated with that Name, the private/public key pair that
corresponds to the certificate, and with the Root Certificate (the
certificate of the signing Certification Authority). To authenticate
another entity, an entity is required to be provided with the
certificate of the associated Certification Authority.
FCAP requires entities to support at least four Root Certificates
against which received corresponding certificates can be validated.
Support for certificate chains and verification of certificate chains
De Santi, et al. Standards Track [Page 14]
RFC 5324 MIB for FC-SP September 2008
containing more than one certificate is optional. Entities need to
be able to access a Certificate Revocation List (CRL) for each
configured Root Certificate, if one is available from the CA.
Certificates on the CRL are considered invalid.
The management of certificates, Certification Authorities, and
Certificate Revocation Lists is the same in Fibre Channel networks as
it is in other networks. Therefore, this document does not define
any MIB objects for such management.
4.7. Traffic Selectors
When Traffic Selectors are compared against an ingress or egress
frame in order to determine the security processing to be applied to
that frame, there are circumstances in which multiple Traffic
Selectors, specifying different actions, can match with the frame.
Specifically, when matching against an egress frame to decide which
active Security Association to transmit on, or, against an ingress
frame unprotected by FC-SP, i.e., without an SPI value in it, to
decide which action ('drop' or 'bypass') to apply. For these cases,
the MIB includes a unique precedence value for each Traffic Selector
such that the one with the numerically lowest precedence value is
determined to be the one that matches. In contrast, ingress frames
on active Security Associations (i.e., protected by FC-SP) are
compared against the set of traffic selectors negotiated when the
Security Association was set up and identified by the SPI value
contained in the frame; the action taken depends on whether any
Traffic Selector matches, but not on which one.
This difference between ingress and egress Traffic Selectors on
active Security Associations is reflected in having separate MIB
tables defined for them: the table for Traffic Selectors on egress
SAs, t11FcSpSaTSelNegOutTable, has a precedence value in its INDEX
clause; whereas the table for Traffic Selectors on ingress SAs,
t11FcSpSaTSelNegInTable, has an arbitrary integer value in its INDEX
clause. For 'drop' and 'bypass' Traffic Selectors, one table,
t11FcSpSaTSelDrByTable, having a precedence value in its INDEX
clause, is sufficient for both ingress and egress traffic.
De Santi, et al. Standards Track [Page 15]
RFC 5324 MIB for FC-SP September 2008
4.8. The MIB Modules
4.8.1. The T11-FC-SP-TC-MIB Module
This MIB module defines Textual Conventions that are being, or have
the potential to be, used in more than one MIB module. The module
also defines Object Identifiers to identify the Cryptographic
Algorithms listed in [FC-SP] so that they can be used as the value of
various MIB objects that specify the algorithms being/to be used by
an FC-SP implementation.
4.8.2. The T11-FC-SP-AUTHENTICATION-MIB Module
This MIB module specifies the management information required to
manage FC-SP Authentication Protocols. It defines three tables:
- t11FcSpAuEntityTable -- a table of Fibre Channel entities that
can be authenticated using FC-SP's Authentication Protocols,
including the names, capabilities, and basic configuration
parameters of the entities.
- t11FcSpAuIfStatTable -- this table has two purposes: to be a
list of the mappings of a FC-SP Authentication entity onto an
interface and to contain Authentication Protocol per-interface
statistics.
- t11FcSpAuRejectTable -- a table of FC-SP Authentication Protocol
transactions that were recently rejected.
It also defines two notifications: one for sending a reject in
response to an AUTH message and another for receiving a reject in
response to an AUTH message.
4.8.3. The T11-FC-SP-ZONING-MIB Module
This MIB module specifies the extensions to the T11-FC-ZONE-SERVER-
MIB module [RFC4936] for the management of FC-SP Zoning Servers.
Specifically, it augments three tables defined in T11-FC-ZONE-SERVER-
MIB:
- t11FcSpZsServerTable -- to this table, it adds FC-SP Zoning
information defined for Zone Servers.
- t11ZsStatsTable -- to this table, it adds FC-SP Zoning
statistics for Zone Servers.
- t11ZsNotifyControlTable -- to this table, it adds control
information for FC-SP Zoning notifications.
De Santi, et al. Standards Track [Page 16]
RFC 5324 MIB for FC-SP September 2008
It also defines two FC-SP Zoning notifications: one for success and
one for failure in the joining of two Fabrics.
4.8.4. The T11-FC-SP-POLICY-MIB Module
This MIB module specifies management information that is used to
manage FC-SP policies. The MIB module has five parts:
- Active Policy Objects - read-only MIB objects representing the
set of active Policy Objects for each Fabric;
- Activate/Deactivate Operations - read-write MIB objects for
invoking operations, either 1) to activate policies that are
specified as a set of non-active Policy Objects, or 2) to
deactivate the currently active policies; also included are
objects giving the status of invoked operations;
- Non-Active Policy Objects - read-create MIB objects to create
and modify non-active Policy Objects;
- Statistics for FC-SP Security Policy Servers;
- The definition and control of notifications for the success or
failure of the activation or deactivation of FC-SP policies.
4.8.5. The T11-FC-SP-SA-MIB Module
This MIB module specifies the management information required to
manage Security Associations established via FC-SP. All of the
tables in this MIB module are INDEX-ed by t11FcSpSaIfIndex, with
syntax InterfaceIndexOrZero, which is either non-zero for a specific
interface or zero for all (of the management instance's) interfaces
to the particular Fabric.
The MIB module consists of six parts:
- a per-Fabric table, t11FcSpSaIfTable, of capabilities,
parameters, status information, and counters; the counters
include non-transient aggregates of per-SA transient counters;
- three tables, t11FcSpSaPropTable, t11FcSpSaTSelPropTable, and
t11FcSpSaTransTable, specifying the proposals for an FC-SP
entity acting as an SA_Initiator to present to the SA_Responder
during the negotiation of Security Associations. The same
information is also used by an FC-SP entity acting as an
SA_Responder to decide what to accept during the negotiation of
De Santi, et al. Standards Track [Page 17]
RFC 5324 MIB for FC-SP September 2008
Security Associations. One of these tables,
t11FcSpSaTransTable, is used not only for information about
security transforms to propose and to accept, but also as agreed
upon during the negotiation of Security Associations;
- a table, t11FcSpSaTSelDrByTable, of Traffic Selectors having the
security action of 'drop' or 'bypass' to be applied either to
ingress traffic, which is unprotected by FC-SP, or to all egress
traffic;
- four tables, t11FcSpSaPairTable, t11FcSpSaTSelNegInTable,
t11FcSpSaTSelNegOutTable, and t11FcSpSaTSelSpiTable, containing
information about active bidirectional pairs of Security
Associations; in particular, t11FcSpSaPairTable has one row per
active bidirectional SA pair, t11FcSpSaTSelNegInTable and
t11FcSpSaTSelNegOutTable contain information on the Traffic
Selectors negotiated on the SAs, and the t11FcSpSaTSelSpiTable
is an alternate lookup table such that the Traffic Selector(s)
in use on a particular Security Association can be quickly
determined based on its (ingress) SPI value;
- a table, t11FcSpSaControlTable, of control and other information
concerning the generation of notifications for events related to
FC-SP Security Associations;
- one notification, t11FcSpSaNotifyAuthFailure, generated on the
occurrence of an Authentication failure for a received FC-2 or
CT_IU frame.
4.9. Rate Control for Notifications
All but one of the notifications defined in the five MIB modules in
this document are notifications that are generated based on events
occurring in the "control plane", e.g., notifications that are
generated at the frequency of operator-initiated activities. The one
exception is t11FcSpSaNotifyAuthFailure, which is generated based on
an event occurring in the "data plane", and could (in a worst case
scenario) occur for every received ingress frame. Therefore, a
method of rate controlling the generation of notifications is needed
for t11FcSpSaNotifyAuthFailure, but not for any of the other
notifications.
For t11FcSpSaNotifyAuthFailure, rate control is achieved by
specifying that a) after the first occurrence of an Authentication
failure on any particular Security Association, the SNMP
notifications for second and subsequent failures are suppressed for
the duration of a time window and b) that even the notification for
the first occurrence is suppressed after it is sent in the same time
De Santi, et al. Standards Track [Page 18]
RFC 5324 MIB for FC-SP September 2008
window for a configured (in t11FcSpSaControlMaxNotifs) number of
Security Associations within a Fabric. Note that while these
suppressions prevent the network from being flooded with
notifications, the Authentication Failures themselves must still be
detected and counted.
The length of the time window is given by t11FcSpSaControlWindow, a
read-write object in the t11FcSpSaControlTable. If and when the time
since the last generation of the notification is less than the value
of sysUpTime (e.g., if one or more notifications have occurred since
the last re-initialization of the management system), then
t11FcSpSaControlElapsed and t11FcSpSaControlSuppressed contain the
elapsed time since the last notification and the number of
notifications suppressed in the window after sending the last one,
respectively. Otherwise, t11FcSpSaControlElapsed contains the value
of sysUpTime and t11FcSpSaControlSuppressed has the value zero.
5. Relationship to Other MIB Modules
The first standardized MIB module for Fibre Channel [RFC2837] was
focused on Fibre Channel Switches. It was obsoleted by the more
generic Fibre Channel Management MIB [RFC4044], which defines basic
information for Fibre Channel Nodes and Switches, including
extensions to the standard IF-MIB [RFC2863] for Fibre Channel
interfaces. Several other MIB modules have since been defined to
extend [RFC4044] for various specific Fibre Channel functionality,
(e.g., [RFC4438], [RFC4439], [RFC4625], [RFC4626], [RFC4747],
[RFC4936], [RFC4935], and [RFC4983]).
The MIB modules defined in this memo further extend [RFC4044] to
cover the operation of Fibre Channel Security Protocols, as specified
in [FC-SP].
One part of the FC-SP specification is "FC-SP Zoning", which is an
extension/variant of the Fibre Channel Zoning defined in [FC-GS-5].
Management information for the latter is defined in the T11-FC-ZONE-
SERVER-MIB module [RFC4936]. Consequently, the T11-FC-SP-ZONING-MIB
module defined in this document defines the extensions to the T11-FC-
ZONE-SERVER-MIB module that are needed to manage FC-SP Zoning.
The MIB modules in this memo import some common Textual Conventions
from T11-TC-MIB, defined in [RFC4439], and from INET-ADDRESS-MIB,
defined in [RFC4001].
If the RADIUS protocol is used for access to an external server,
information about RADIUS Servers is likely to be available from the
RADIUS-AUTH-CLIENT-MIB [RFC4668].
De Santi, et al. Standards Track [Page 19]
RFC 5324 MIB for FC-SP September 2008
6. MIB Module Definitions
6.1. The T11-FC-SP-TC-MIB Module
T11-FC-SP-TC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, mib-2,
Unsigned32 FROM SNMPv2-SMI -- [RFC2578]
TEXTUAL-CONVENTION FROM SNMPv2-TC; -- [RFC2579]
t11FcTcMIB MODULE-IDENTITY
LAST-UPDATED "200808200000Z"
ORGANIZATION "This MIB module was developed through the
coordinated effort of two organizations:
T11 began the development and the IETF (in
the IMSS Working Group) finished it."
CONTACT-INFO
" Claudio DeSanti
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
EMail: cds@cisco.com
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
Email: kzm@cisco.com"
DESCRIPTION
"This MIB module defines Textual Conventions for use in
the multiple MIB modules, which together define the
instrumentation for an implementation of the Fibre Channel
Security Protocols (FC-SP) specification.
This MIB module also defines Object Identities (for use as
possible values of MIB objects with syntax AutonomousType),
including OIDs for the Cryptographic Algorithms defined
in FC-SP.
Copyright (C) The IETF Trust (2008). This version
of this MIB module is part of RFC 5324; see the RFC
itself for full legal notices."
REVISION "200808200000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC 5324."
::= { mib-2 175 }
De Santi, et al. Standards Track [Page 20]
RFC 5324 MIB for FC-SP September 2008
t11FcSpIdentities OBJECT IDENTIFIER ::= { t11FcTcMIB 1 }
t11FcSpAlgorithms OBJECT IDENTIFIER ::= { t11FcSpIdentities 1 }
--
-- Textual Conventions
--
T11FcSpPolicyHashFormat ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Identifies a cryptographic hash function used to create
a hash value that summarizes an FC-SP Policy Object.
Each definition of an object with this TC as its syntax
must be accompanied by a corresponding definition of an
object with T11FcSpPolicyHashValue as its syntax, and
containing the hash value.
The first two cryptographic hash functions are:
Hash Type Hash Tag Hash Length (Bytes)
SHA-1 '00000001'h 20
SHA-256 '00000002'h 32
"
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.3.1 and table 106.
- FIPS PUB 180-2."
SYNTAX OCTET STRING (SIZE (4))
T11FcSpPolicyHashValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the value of the cryptographic hash function
of an FC-SP Policy Object.
Each definition of an object with this TC as its syntax
must be accompanied by a corresponding definition of an
object with T11FcSpPolicyHashFormat as its syntax.
The corresponding object identifies the cryptographic
hash function used to create the hash value."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.3.1 and table 106."
SYNTAX OCTET STRING (SIZE (0..64))
De Santi, et al. Standards Track [Page 21]
RFC 5324 MIB for FC-SP September 2008
T11FcSpHashCalculationStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"When some kind of 'database' is defined in a set of
read-write MIB objects, it is common that multiple changes
in the data need to be made at the same time. So, if hash
values are maintained for that data, those hash values are
only correct if and when they are re-calculated after every
change. In such circumstances, the use of an object with
this syntax allows the re-calculation of the hash values to
be deferred until all changes have been made, and therefore
the calculation need only be done once after all changes,
rather than repeatedly/after each individual change.
The definition of an object defined using this TC is
required to specify which one or more instances of which
MIB objects contain the hash values operated upon (or
whose status is given) by the value of this TC.
When read, the value of an object with this syntax is
either:
correct -- the identified MIB object instance(s)
contain the correct hash values; or
stale -- the identified MIB object instance(s)
contain stale (possibly incorrect) values.
Writing a value of 'calculate' is a request to re-calculate
and update the values of the corresponding instances of the
identified MIB objects. Writing a value of 'correct' or
'stale' to this object is an error (e.g., 'wrongValue')."
SYNTAX INTEGER {
calculate(1),
correct(2),
stale(3)
}
T11FcSpAuthRejectReasonCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A reason code contained in an AUTH_Reject message, or
in an SW_RJT (rejecting an AUTH_ILS), or in an LS_RJT
(rejecting an AUTH-ELS)."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 17, 48, 52."
SYNTAX INTEGER {
De Santi, et al. Standards Track [Page 22]
RFC 5324 MIB for FC-SP September 2008
authFailure(1),
logicalError(2),
logicalBusy(3),
authILSNotSupported(4),
authELSNotSupported(5),
notLoggedIn(6)
}
T11FcSpAuthRejReasonCodeExp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A reason code explanation contained in an AUTH_Reject
message, or in an SW_RJT (rejecting an AUTH_ILS), or in
an LS_RJT (rejecting an AUTH-ELS)."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Tables 18, 48, 52."
SYNTAX INTEGER {
authMechanismNotUsable(1),
dhGroupNotUsable(2),
hashFunctionNotUsable(3),
authTransactionAlreadyStarted(4),
authenticationFailed(5),
incorrectPayload(6),
incorrectAuthProtocolMessage(7),
restartAuthProtocol(8),
authConcatNotSupported(9),
unsupportedProtocolVersion(10),
logicalBusy(11),
authILSNotSupported(12),
authELSNotSupported(13),
notLoggedIn(14)
}
T11FcSpHashFunctions ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A set of zero, one, or more hash functions defined for
use in FC-SP."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 14."
SYNTAX BITS {
md5(0),
sha1(1)
}
De Santi, et al. Standards Track [Page 23]
RFC 5324 MIB for FC-SP September 2008
T11FcSpSignFunctions ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A set of zero, one, or more signature functions defined
for signing certificates for use with FCAP in FC-SP."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, tables 38 & 39."
SYNTAX BITS {
rsaSha1(0)
}
T11FcSpDhGroups ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A set of zero, one, or more DH Groups defined for use
in FC-SP."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 15."
SYNTAX BITS {
null(0),
group1024(1),
group1280(2),
group1536(3),
group2048(4),
group3072(5),
group4096(6),
group6144(7),
group8192(8)
}
T11FcSpPolicyObjectType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that identifies the type of an FC-SP Policy
Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 102."
SYNTAX INTEGER {
summary(1),
switchMemberList(2),
nodeMemberList(3),
switchConnectivity(4),
De Santi, et al. Standards Track [Page 24]
RFC 5324 MIB for FC-SP September 2008
ipMgmtList(5),
attribute(6)
}
T11FcSpPolicyNameType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The format and usage of a companion object having
T11FcSpPolicyName as its syntax.
Six of the values indicate the same format, i.e., they
differ only in semantics. That common format is a Fibre
Channel 'Name_Identifier', i.e., the same syntax as
'FcNameIdOrZero (SIZE(8))'.
These six are three pairs of one restricted and one
unrestricted. Each usage of this syntax must specify
what the meaning of 'restricted' is for that usage and
how the characteristics and behavior of restricted
names differ from unrestricted names.
The six are:
'nodeName' - a Node_Name, which is the
Name_Identifier associated
with a Fibre Channel Node.
'restrictedNodeName' - a Restricted Node_Name.
'portName' - the Name_Identifier associated
with a Fibre Channel Port.
'restrictedPortName' - a Restricted Port_Name.
'wildcard' - a Wildcard value that is used to
identify 'all others' (typically,
all other members of a Policy
Object, not all other Policy
Objects).
'restrictedWildcard' - a Restricted Wildcard value.
Other possible values are:
'alphaNumericName' - the value begins with an ASCII
letter (upper or lower case) followed by (0 ... 63)
characters from the set: lower case letters, upper case
letters, digits, and the four symbols: dollar-sign ($),
De Santi, et al. Standards Track [Page 25]
RFC 5324 MIB for FC-SP September 2008
dash (-), caret (^), and underscore (_).
'ipv6AddressRange' - two IPv6 addresses in network
byte order, the numerically smallest first and the
numerically largest second; total length is 32 bytes.
'ipv4AddressRange' - two IPv4 addresses in network
byte order, the numerically smallest first and the
numerically largest second; total length is 8 bytes."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 103."
SYNTAX INTEGER {
nodeName(1),
restrictedNodeName(2),
portName(3),
restrictedPortName(4),
wildcard(5),
restrictedWildcard(6),
alphaNumericName(7),
ipv6AddressRange(8),
ipv4AddressRange(9)
}
T11FcSpPolicyName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A syntax used, when defining Policy Objects, for the
name of something.
An object that uses this syntax always identifies a
companion object with syntax T11FcSpPolicyNameType
such that the companion object specifies the format
and usage of the object with this syntax.
When the companion object has the value 'wildcard' or
'restrictedWildcard', the value of the T11FcSpPolicyName
object is: '0000000000000000'h."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 103."
SYNTAX OCTET STRING (SIZE (1..64))
T11FcSpAlphaNumName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
De Santi, et al. Standards Track [Page 26]
RFC 5324 MIB for FC-SP September 2008
"A syntax used when defining Policy Objects for the
name of something, where the name is always in the format
specified by:
T11FcSpPolicyNameType = 'alphaNumericName'
"
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 103."
SYNTAX OCTET STRING (SIZE (1..64))
T11FcSpAlphaNumNameOrAbsent ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An extension of the T11FcSpAlphaNumName TC with
one additional possible value: the zero-length string
to indicate the absence of a name."
SYNTAX OCTET STRING (SIZE (0..64))
T11FcSaDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The direction of frame transmission on a Security
Association. Note that Security Associations are
unidirectional, but they always exist as part of an
SA pair of the same type in opposite directions."
SYNTAX INTEGER { ingress(1), egress(2) }
T11FcSpiIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An SPI (Security Parameter Index) value is carried in the
SPI field of a frame protected by the ESP_Header. An SPI
is also carried in the SAID field of a Common Transport
Information Unit (CT_IU) protected by CT_Authentication.
An SPI value identifies the Security Association on which
the frame is being transmitted."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 4.7.2 and 4.7.3."
SYNTAX Unsigned32 (0..4294967295) -- the default range!!
T11FcSpPrecedence ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
De Santi, et al. Standards Track [Page 27]
RFC 5324 MIB for FC-SP September 2008
"The precedence of a Traffic Selector. If a frame
matches with two or more Traffic Selectors, then the match
that takes precedence is the one with the Traffic Selector
having the numerically smallest precedence value. Note that
precedence values are not necessarily contiguous."
SYNTAX Unsigned32 (0..4294967295) -- the default range!!
T11FcRoutingControl ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x"
STATUS current
DESCRIPTION
"A value stored in the R_CTL (Routing Control) 8-bit field
of an FC-2 frame containing routing and information bits to
categorize the frame function.
For FC-2 frames, an R_CTL value typically distinguishes
between control versus data frames and/or solicited versus
unsolicited frames, and in combination with the TYPE field
(see T11FcSpType), identifies a particular link-layer
service/protocol using FC-2.
For CT_Authentication, the information field in the R_CTL
field contains '02'h for Request CT_IUs and '03'h for
Response CT_IUs.
The comparison of two values having this syntax is done
by treating each string as an 8-bit numeric value."
REFERENCE
"- Fibre Channel - Framing and Signaling-2 (FC-FS-2),
ANSI INCITS 424-2007, Project T11/1619-D,
February 2007, section 9.3.
- Fibre Channel - Generic Services-5 (FC-GS-5),
ANSI INCITS 427-2006, sections 4.5.2.4.2, 4.5.2.4.3
and table 12."
SYNTAX OCTET STRING (SIZE(1))
T11FcSpType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2x"
STATUS current
DESCRIPTION
"A value, or combination of values, contained in a frame
header used in identifying the link layer service/protocol
of a frame. The value is always two octets:
- for FC-2 frames, the first octet is zero and the second
octet contains the Data structure type (TYPE) value
defined by FC-FS-2. The TYPE value is used in
combination with T11FcRoutingControl to identify a link
De Santi, et al. Standards Track [Page 28]
RFC 5324 MIB for FC-SP September 2008
layer service/protocol.
- for Common Transport Information Units (CT_IUs), the
first octet contains a GS_Type value and the second
octet contains a GS_Subtype value, defined by FC-GS-5.
The comparison of two values having this syntax is done
by treating each string as the numeric value obtained by
numerically combining the individual octet's value as
follows:
(256 * 1st-octet) + 2nd-octet
"
REFERENCE
"- Fibre Channel - Framing and Signaling-2 (FC-FS-2),
ANSI INCITS 424-2007, Project T11/1619-D,
February 2007, section 9.6.
- Fibre Channel - Generic Services-5 (FC-GS-5),
ANSI INCITS 427-2006, sections 4.3.2.4 and 4.3.2.5."
SYNTAX OCTET STRING (SIZE(2))
T11FcSpTransforms ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A list of the standardized transforms that are defined
by FC-SP for use with ESP_Header, CT_Authentication, and/or
IKEv2 Support."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
Appendix A.3.1, tables A.23, A.24, A.25, A.26."
SYNTAX BITS {
encrNull(0),
encrAesCbc(1),
encrAesCtr(2),
encrAesGcm(3),
encr3Des(4),
prfHmacMd5(5),
prfHmacSha1(6),
prfAesCbc(7),
authHmacMd5L96(8),
authHmacSha1L96(9),
authHmacMd5L128(10),
authHmacSha1L160(11),
encrNullAuthAesGmac(12),
dhGroups1024bit(13),
dhGroups2048bit(14)
}
De Santi, et al. Standards Track [Page 29]
RFC 5324 MIB for FC-SP September 2008
T11FcSpSecurityProtocolId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A Security Protocol identifier to identify
the protocol by which traffic is to be protected,
e.g., ESP_Header or CT_Authentication."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.3.2.2 and table 67."
SYNTAX INTEGER { espHeader(1), ctAuth(2) }
T11FcSpLifetimeLeft ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC is used for one object of an associated pair
of objects. The object with this syntax specifies a
remaining lifetime of something, e.g., of an SA, where
the lifetime is given in the units specified by the other
object of the pair which has T11FcSpLifetimeLeftUnits
as its syntax."
SYNTAX Unsigned32
T11FcSpLifetimeLeftUnits ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An object, defined using T11FcSpLifetimeLeft TC as
its syntax, is required to be one of an associated
pair of objects such that the other object of the pair
is defined with this T11FcSpLifetimeLeftUnits TC as
its syntax and with its value specifying the
units of the remaining lifetime given by the
value of the T11FcSpLifetimeLeft object."
SYNTAX INTEGER {
seconds(1), -- seconds
kiloBytes(2), -- 10^^3 bytes
megaBytes(3), -- 10^^6 bytes
gigaBytes(4), -- 10^^9 bytes
teraBytes(5), -- 10^^12 bytes
petaBytes(6), -- 10^^15 bytes
exaBytes(7), -- 10^^18 bytes
zettaBytes(8), -- 10^^21 bytes
yottaBytes(9) -- 10^^24 bytes
}
--
-- Object Identities to identify the Cryptographic Algorithms
-- listed in FC-SP.
De Santi, et al. Standards Track [Page 30]
RFC 5324 MIB for FC-SP September 2008
--
t11FcSpEncryptAlgorithms
OBJECT IDENTIFIER ::= { t11FcSpAlgorithms 1 }
t11FcSpEncrNull OBJECT-IDENTITY
STATUS current
DESCRIPTION "The ENCR_NULL algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 70."
::= { t11FcSpEncryptAlgorithms 1 }
t11FcSpEncrAesCbc OBJECT-IDENTITY
STATUS current
DESCRIPTION "The ENCR_AES_CBC algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 70."
::= { t11FcSpEncryptAlgorithms 2 }
t11FcSpEncrAesCtr OBJECT-IDENTITY
STATUS current
DESCRIPTION "The ENCR_AES_CTR algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 70."
::= { t11FcSpEncryptAlgorithms 3 }
t11FcSpEncrAesGcm OBJECT-IDENTITY
STATUS current
DESCRIPTION "The ENCR_AES_GCM algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 70."
::= { t11FcSpEncryptAlgorithms 4 }
t11FcSpEncr3Des OBJECT-IDENTITY
STATUS current
DESCRIPTION "The ENCR_3DES algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 70."
De Santi, et al. Standards Track [Page 31]
RFC 5324 MIB for FC-SP September 2008
::= { t11FcSpEncryptAlgorithms 5 }
t11FcSpAuthAlgorithms
OBJECT IDENTIFIER ::= { t11FcSpAlgorithms 2 }
t11FcSpAuthNull OBJECT-IDENTITY
STATUS current
DESCRIPTION "The AUTH_NONE algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 72."
::= { t11FcSpAuthAlgorithms 1 }
t11FcSpAuthHmacMd5L96 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The AUTH_HMAC_MD5_96 algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 72."
::= { t11FcSpAuthAlgorithms 2 }
t11FcSpAuthHmacSha1L96 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The AUTH_HMAC_SHA1_96 algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 72."
::= { t11FcSpAuthAlgorithms 3 }
t11FcSpAuthHmacMd5L128 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The AUTH_HMAC_MD5_128 algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 72."
::= { t11FcSpAuthAlgorithms 4 }
t11FcSpAuthHmacSha1L160 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The AUTH_HMAC_SHA1_160 algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 72."
De Santi, et al. Standards Track [Page 32]
RFC 5324 MIB for FC-SP September 2008
::= { t11FcSpAuthAlgorithms 5 }
t11FcSpEncrNullAuthAesGmac OBJECT-IDENTITY
STATUS current
DESCRIPTION "The ENCR_NULL_AUTH_AES_GMAC algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 70."
::= { t11FcSpEncryptAlgorithms 6 }
END
6.2. The T11-FC-SP-AUTHENTICATION-MIB Module
--********************************************************************
-- FC-SP Authentication Protocols
--
T11-FC-SP-AUTHENTICATION-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
NOTIFICATION-TYPE,
mib-2, Counter32, Unsigned32
FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
StorageType, AutonomousType,
TruthValue, TimeStamp FROM SNMPv2-TC -- [RFC2579]
InterfaceIndex FROM IF-MIB -- [RFC2863]
fcmInstanceIndex,
FcNameIdOrZero FROM FC-MGMT-MIB -- [RFC4044]
t11FamLocalSwitchWwn
FROM T11-FC-FABRIC-ADDR-MGR-MIB -- [RFC4439]
T11FabricIndex FROM T11-TC-MIB -- [RFC4439]
T11FcSpDhGroups,
T11FcSpHashFunctions,
T11FcSpSignFunctions,
T11FcSpLifetimeLeft,
T11FcSpLifetimeLeftUnits,
T11FcSpAuthRejectReasonCode,
T11FcSpAuthRejReasonCodeExp FROM T11-FC-SP-TC-MIB;
t11FcSpAuthenticationMIB MODULE-IDENTITY
LAST-UPDATED "200808200000Z"
ORGANIZATION "This MIB module was developed through the
De Santi, et al. Standards Track [Page 33]
RFC 5324 MIB for FC-SP September 2008
coordinated effort of two organizations:
T11 began the development and the IETF (in
the IMSS Working Group) finished it."
CONTACT-INFO
" Claudio DeSanti
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
EMail: cds@cisco.com
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
Email: kzm@cisco.com"
DESCRIPTION
"This MIB module specifies the management information
required to manage the Authentication Protocols defined by
Fibre Channel's FC-SP specification.
This MIB module defines three tables:
- t11FcSpAuEntityTable is a table of Fibre Channel
entities that can be authenticated using FC-SP's
Authentication Protocols.
- t11FcSpAuIfStatTable is a table with one row for each
mapping of an Authentication entity onto an interface,
containing statistics information.
- t11FcSpAuRejectTable is a table of volatile information
about FC-SP Authentication Protocol transactions
that were most recently rejected.
Copyright (C) The IETF Trust (2008). This version
of this MIB module is part of RFC 5324; see the RFC
itself for full legal notices."
REVISION "200808200000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC 5324."
::= { mib-2 176 }
t11FcSpAuMIBNotifications
OBJECT IDENTIFIER ::= { t11FcSpAuthenticationMIB 0 }
t11FcSpAuMIBObjects
OBJECT IDENTIFIER ::= { t11FcSpAuthenticationMIB 1 }
t11FcSpAuMIBConformance
OBJECT IDENTIFIER ::= { t11FcSpAuthenticationMIB 2 }
De Santi, et al. Standards Track [Page 34]
RFC 5324 MIB for FC-SP September 2008
t11FcSpAuMIBIdentities
OBJECT IDENTIFIER ::= { t11FcSpAuthenticationMIB 3 }
--
-- OIDs defined for use as values of t11FcSpAuServerProtocol
--
t11FcSpAuServerProtocolRadius OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This OID identifies RADIUS as the protocol used
to communicate with an External Server as part of
the process by which identities are verified.
In this case, information about the RADIUS Servers
is likely to be provided in radiusAuthServerExtTable
defined in the RADIUS-AUTH-CLIENT-MIB."
REFERENCE
"radiusAuthServerExtTable in 'RADIUS Authentication
Client MIB', RFC 4668, August 2006."
::= { t11FcSpAuMIBIdentities 1 }
t11FcSpAuServerProtocolDiameter OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This OID identifies Diameter as the protocol used
to communicate with an External Server as part of
the process by which identities are verified."
REFERENCE
"RFC 3588, September 2003."
::= { t11FcSpAuMIBIdentities 2 }
t11FcSpAuServerProtocolTacacs OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This OID identifies TACACS as the protocol used
to communicate with an External Server as part of
the process by which identities are verified."
REFERENCE
"RFC 1492, July 1993."
::= { t11FcSpAuMIBIdentities 3 }
--
-- Configuration for the Authentication Protocols
--
t11FcSpAuEntityTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpAuEntityEntry
MAX-ACCESS not-accessible
De Santi, et al. Standards Track [Page 35]
RFC 5324 MIB for FC-SP September 2008
STATUS current
DESCRIPTION
"A table of Fibre Channel entities that can be authenticated
using FC-SP's Authentication Protocols.
The purpose of an FC-SP Authentication Protocol is to verify
that a claimed name is associated with the claiming entity.
The Authentication Protocols can be used to authenticate
Nx_Ports, B_Ports, or Switches."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 3.2.25."
::= { t11FcSpAuMIBObjects 1 }
t11FcSpAuEntityEntry OBJECT-TYPE
SYNTAX T11FcSpAuEntityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the configuration and capabilities of an
FC-SP entity (which is managed within the Fibre Channel
management instance identified by fcmInstanceIndex) on a
particular Fabric with respect to FC-SP's Authentication
Protocols."
INDEX { fcmInstanceIndex, t11FcSpAuEntityName,
t11FcSpAuFabricIndex }
::= { t11FcSpAuEntityTable 1 }
T11FcSpAuEntityEntry ::= SEQUENCE {
t11FcSpAuEntityName FcNameIdOrZero,
t11FcSpAuFabricIndex T11FabricIndex,
t11FcSpAuServerProtocol AutonomousType,
-- Config parameters
t11FcSpAuStorageType StorageType,
t11FcSpAuSendRejNotifyEnable TruthValue,
t11FcSpAuRcvRejNotifyEnable TruthValue,
t11FcSpAuDefaultLifetime T11FcSpLifetimeLeft,
t11FcSpAuDefaultLifetimeUnits T11FcSpLifetimeLeftUnits,
t11FcSpAuRejectMaxRows Unsigned32,
-- Capabilities
t11FcSpAuDhChapHashFunctions T11FcSpHashFunctions,
t11FcSpAuDhChapDhGroups T11FcSpDhGroups,
t11FcSpAuFcapHashFunctions T11FcSpHashFunctions,
t11FcSpAuFcapCertsSignFunctions T11FcSpSignFunctions,
t11FcSpAuFcapDhGroups T11FcSpDhGroups,
t11FcSpAuFcpapHashFunctions T11FcSpHashFunctions,
t11FcSpAuFcpapDhGroups T11FcSpDhGroups
De Santi, et al. Standards Track [Page 36]
RFC 5324 MIB for FC-SP September 2008
}
t11FcSpAuEntityName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name used to identify the FC-SP entity.
For entities that are Fibre Channel Switches, this value
corresponds to the Switch's value of fcmSwitchWWN. For
entities other than Fibre Channel Switches, this value
corresponds to the value of fcmInstanceWwn for the
corresponding Fibre Channel management instance."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.3.3.
- fcmInstanceWwn & fcmSwitchWWN,
'Fibre Channel Management MIB', RFC 4044, May 2005."
::= { t11FcSpAuEntityEntry 1 }
t11FcSpAuFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a
particular Fabric to which the entity is attached."
::= { t11FcSpAuEntityEntry 2 }
t11FcSpAuServerProtocol OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol, if any, used by the entity to communicate
with a third party (i.e., an External Server) as part of
the process by which it verifies DH-CHAP responses. For
example, if the entity is using an external RADIUS server
to verify DH-CHAP responses, then this object will have
the value t11FcSpAuServerProtocolRadius.
The value, zeroDotZero, is used to indicate that no
protocol is being used to communicate with a third
party to verify DH-CHAP responses.
When no protocol is being used, or if the third party is
De Santi, et al. Standards Track [Page 37]
RFC 5324 MIB for FC-SP September 2008
unreachable via the specified protocol, then locally
configured information (if any) may be used instead."
::= { t11FcSpAuEntityEntry 3 }
t11FcSpAuStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the memory realization of
configuration information related to an FC-SP
Entity on a particular Fabric: specifically, for
MIB objects in the row containing this object.
Even if an instance of this object has the value
'permanent(4)', none of the information in the
corresponding row of this table needs to be writable."
::= { t11FcSpAuEntityEntry 4 }
t11FcSpAuSendRejNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether or not the entity should issue
t11FcSpAuRejectSentNotify notifications when sending
AUTH_Reject/SW_RJT/LS_RJT to reject an AUTH message.
If the value of the object is 'true', then this type of
notification is generated. If the value is 'false',
this type of notification is not generated."
DEFVAL { false }
::= { t11FcSpAuEntityEntry 5 }
t11FcSpAuRcvRejNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether or not the entity should issue
t11FcSpAuRejectReceivedNotify notifications on the receipt
of AUTH_Reject/SW_RJT/LS_RJT messages.
If the value of the object is 'true', then this type of
notification is generated. If the value is 'false',
this type of notification is not generated."
DEFVAL { false }
::= { t11FcSpAuEntityEntry 6 }
De Santi, et al. Standards Track [Page 38]
RFC 5324 MIB for FC-SP September 2008
t11FcSpAuDefaultLifetime OBJECT-TYPE
SYNTAX T11FcSpLifetimeLeft
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the value of this object is non-zero, it specifies the
default value of a lifetime, specified in units given by
the corresponding instance of t11FcSpAuDefaultLifetimeUnits.
This default lifetime is to be used for any Security
Association that has no explicitly specified value for its
lifetime.
An SA's lifetime is either the time interval or the number
of passed bytes, after which the SA has to be terminated and
(if necessary) replaced with a new SA.
If this object is zero, then there is no default value for
lifetime."
DEFVAL { 28800 } -- 8 hours (in units of seconds)
::= { t11FcSpAuEntityEntry 7 }
t11FcSpAuDefaultLifetimeUnits OBJECT-TYPE
SYNTAX T11FcSpLifetimeLeftUnits
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The units in which the value of the corresponding
instance of t11FcSpAuDefaultLifetime specifies a
default lifetime for a Security Association that has
no explicitly-specified value for its lifetime."
DEFVAL { seconds }
::= { t11FcSpAuEntityEntry 8 }
t11FcSpAuRejectMaxRows OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of rows in the t11FcSpAuRejectTable for
this entity on this Fabric. If and when an AUTH message is
rejected, and the t11FcSpAuRejectTable already contains this
maximum number of rows for the specific entity and Fabric,
the row containing the oldest information is discarded and
replaced by a row containing information about the new
rejection.
There will be less than this maximum number of rows in
the t11FcSpAuRejectTable in exceptional circumstances,
De Santi, et al. Standards Track [Page 39]
RFC 5324 MIB for FC-SP September 2008
e.g., after an agent restart.
In an implementation that does not support the
t11FcSpAuRejectTable, this object will always be zero."
::= { t11FcSpAuEntityEntry 9 }
t11FcSpAuDhChapHashFunctions OBJECT-TYPE
SYNTAX T11FcSpHashFunctions
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hash functions that the entity supports when using
the DH-CHAP algorithm."
::= { t11FcSpAuEntityEntry 10 }
t11FcSpAuDhChapDhGroups OBJECT-TYPE
SYNTAX T11FcSpDhGroups
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DH Groups that the entity supports when using the
DH-CHAP algorithm in FC-SP."
::= { t11FcSpAuEntityEntry 11 }
t11FcSpAuFcapHashFunctions OBJECT-TYPE
SYNTAX T11FcSpHashFunctions
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hash functions that the entity supports when
specified as Protocol Parameters in the AUTH_Negotiate
message for FCAP in FC-SP."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.5.2.1 and table 28."
::= { t11FcSpAuEntityEntry 12 }
t11FcSpAuFcapCertsSignFunctions OBJECT-TYPE
SYNTAX T11FcSpSignFunctions
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The signature functions used within certificates that
the entity supports when using FCAP in FC-SP."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
De Santi, et al. Standards Track [Page 40]
RFC 5324 MIB for FC-SP September 2008
February 2007, section 5.5.4.2 and tables 38 & 39."
::= { t11FcSpAuEntityEntry 13 }
t11FcSpAuFcapDhGroups OBJECT-TYPE
SYNTAX T11FcSpDhGroups
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DH Groups that the entity supports when using the
FCAP algorithm in FC-SP."
::= { t11FcSpAuEntityEntry 14 }
t11FcSpAuFcpapHashFunctions OBJECT-TYPE
SYNTAX T11FcSpHashFunctions
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hash functions that the entity supports when using
the FCPAP algorithm in FC-SP."
::= { t11FcSpAuEntityEntry 15 }
t11FcSpAuFcpapDhGroups OBJECT-TYPE
SYNTAX T11FcSpDhGroups
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DH Groups that the entity supports when using the
FCPAP algorithm in FC-SP."
::= { t11FcSpAuEntityEntry 16 }
--
-- The Mapping of Authentication Entities onto Interfaces
-- and Statistics
--
t11FcSpAuIfStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpAuIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each FC-SP Authentication entity can operate on one or more
interfaces, but at most one of them can operate on each
interface. A row in this table exists for each interface
to each Fabric on which each Authentication entity operates.
The objects within this table contain statistics information
related to FC-SP's Authentication Protocols."
::= { t11FcSpAuMIBObjects 2 }
De Santi, et al. Standards Track [Page 41]
RFC 5324 MIB for FC-SP September 2008
t11FcSpAuIfStatEntry OBJECT-TYPE
SYNTAX T11FcSpAuIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of Authentication Protocols statistics for an FC-SP
Authentication entity (identified by t11FcSpAuEntityName) on
one of its interfaces to a particular Fabric, which is
managed within the Fibre Channel management instance
identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpAuEntityName,
t11FcSpAuIfStatInterfaceIndex,
t11FcSpAuIfStatFabricIndex }
::= { t11FcSpAuIfStatTable 1 }
T11FcSpAuIfStatEntry ::= SEQUENCE {
t11FcSpAuIfStatInterfaceIndex InterfaceIndex,
t11FcSpAuIfStatFabricIndex T11FabricIndex,
t11FcSpAuIfStatTimeouts Counter32,
t11FcSpAuIfStatInAcceptedMsgs Counter32,
t11FcSpAuIfStatInLsSwRejectedMsgs Counter32,
t11FcSpAuIfStatInAuthRejectedMsgs Counter32,
t11FcSpAuIfStatOutAcceptedMsgs Counter32,
t11FcSpAuIfStatOutLsSwRejectedMsgs Counter32,
t11FcSpAuIfStatOutAuthRejectedMsgs Counter32
}
t11FcSpAuIfStatInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface on which the FC-SP Authentication entity
operates and for which the statistics are collected."
::= { t11FcSpAuIfStatEntry 1 }
t11FcSpAuIfStatFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value identifying the particular Fabric for
which the statistics are collected."
::= { t11FcSpAuIfStatEntry 2 }
t11FcSpAuIfStatTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
De Santi, et al. Standards Track [Page 42]
RFC 5324 MIB for FC-SP September 2008
STATUS current
DESCRIPTION
"The number of FC-SP Authentication Protocol messages sent
by the particular entity on the particular Fabric on the
particular interface, for which no response was received
within a timeout period.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.11."
::= { t11FcSpAuIfStatEntry 3 }
t11FcSpAuIfStatInAcceptedMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FC-SP Authentication Protocol messages
received and accepted by the particular entity on the
particular Fabric on the particular interface.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.1."
::= { t11FcSpAuIfStatEntry 4 }
t11FcSpAuIfStatInLsSwRejectedMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FC-SP Authentication Protocol messages
received by the particular entity on the particular Fabric
on the particular interface, and rejected by a lower-level
(SW_RJT or LS_RJT) reject.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.1."
De Santi, et al. Standards Track [Page 43]
RFC 5324 MIB for FC-SP September 2008
::= { t11FcSpAuIfStatEntry 5 }
t11FcSpAuIfStatInAuthRejectedMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FC-SP Authentication Protocol messages
received by the particular entity on the particular Fabric
on the particular interface, and rejected by an AUTH_Reject
message.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.1."
::= { t11FcSpAuIfStatEntry 6 }
t11FcSpAuIfStatOutAcceptedMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FC-SP Authentication Protocol messages sent
by the particular entity on the particular Fabric on the
particular interface, which were accepted by the
neighboring entity, i.e., not rejected by an AUTH_Reject
message, nor by a lower-level (SW_RJT or LS_RJT) reject.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.1."
::= { t11FcSpAuIfStatEntry 7 }
t11FcSpAuIfStatOutLsSwRejectedMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FC-SP Authentication Protocol messages sent
by the particular entity on the particular Fabric on the
particular interface, which were rejected by a lower-level
(SW_RJT or LS_RJT) reject.
De Santi, et al. Standards Track [Page 44]
RFC 5324 MIB for FC-SP September 2008
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.1."
::= { t11FcSpAuIfStatEntry 8 }
t11FcSpAuIfStatOutAuthRejectedMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FC-SP Authentication Protocol messages sent
by the particular entity on the particular Fabric on the
particular interface, which were rejected by an
AUTH_Reject message.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.1."
::= { t11FcSpAuIfStatEntry 9 }
--
-- Information about Authentication Protocol Transactions
-- which were recently rejected
--
t11FcSpAuRejectTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpAuRejectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of volatile information about FC-SP Authentication
Protocol transactions that were recently rejected with
an AUTH_Reject message, or with an SW_RJT/LS_RJT.
The maximum number of rows in this table for a specific
entity on a specific Fabric is given by the value of the
corresponding instance of t11FcSpAuRejectMaxRows.
The syntax of t11FcSpAuRejTimestamp is TimeStamp, and thus
its value rolls over to zero after approximately 497 days.
To avoid any confusion due to such a rollover, rows should
be deleted from this table before they are 497 days old.
De Santi, et al. Standards Track [Page 45]
RFC 5324 MIB for FC-SP September 2008
This table will be empty if no AUTH_Reject messages,
nor any SW_RJT/LS_RJT's rejecting an AUTH message,
have been sent or received since the last
re-initialization of the agent."
::= { t11FcSpAuMIBObjects 3 }
t11FcSpAuRejectEntry OBJECT-TYPE
SYNTAX T11FcSpAuRejectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about one AUTH message (either an
AUTH_ELS or an AUTH_ILS) that was rejected with an
AUTH_Reject, SW_RJT or LS_RJT message, sent/received by
the entity identified by values of fcmInstanceIndex and
t11FcSpAuEntityName, on an interface to a particular
Fabric."
INDEX { fcmInstanceIndex, t11FcSpAuEntityName,
t11FcSpAuRejInterfaceIndex, t11FcSpAuRejFabricIndex,
t11FcSpAuRejTimestamp }
::= { t11FcSpAuRejectTable 1 }
T11FcSpAuRejectEntry ::= SEQUENCE {
t11FcSpAuRejInterfaceIndex InterfaceIndex,
t11FcSpAuRejFabricIndex T11FabricIndex,
t11FcSpAuRejTimestamp TimeStamp,
t11FcSpAuRejDirection INTEGER,
t11FcSpAuRejType INTEGER,
t11FcSpAuRejAuthMsgString OCTET STRING,
t11FcSpAuRejReasonCode T11FcSpAuthRejectReasonCode,
t11FcSpAuRejReasonCodeExp T11FcSpAuthRejReasonCodeExp
}
t11FcSpAuRejInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface on which the rejected AUTH message was
sent or received."
::= { t11FcSpAuRejectEntry 1 }
t11FcSpAuRejFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value identifying the particular Fabric on
De Santi, et al. Standards Track [Page 46]
RFC 5324 MIB for FC-SP September 2008
which the rejected AUTH message was sent or received."
::= { t11FcSpAuRejectEntry 2 }
t11FcSpAuRejTimestamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The time at which the AUTH message was rejected. If two
rows have the same value of this object for the same
entity on the same interface and Fabric, the value of
this object for the later one is incremented by one."
::= { t11FcSpAuRejectEntry 3 }
t11FcSpAuRejDirection OBJECT-TYPE
SYNTAX INTEGER { sent(1), received(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the rejection was sent or
received by the identified entity.
The value 'sent(1)' corresponds to a notification of
type t11FcSpAuRejectSentNotify; the value 'received(2)'
corresponds to t11FcSpAuRejectReceivedNotify."
::= { t11FcSpAuRejectEntry 4 }
t11FcSpAuRejType OBJECT-TYPE
SYNTAX INTEGER {
authReject(1),
swRjt(2),
lsRjt(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the rejection was an
AUTH_Reject, an SW_RJT or an LS_RJT."
::= { t11FcSpAuRejectEntry 5 }
t11FcSpAuRejAuthMsgString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The binary content of the AUTH message that was
rejected, formatted as an octet string (in network
byte order) containing the content of the message.
De Santi, et al. Standards Track [Page 47]
RFC 5324 MIB for FC-SP September 2008
If the binary content is unavailable, then the
length is zero. Otherwise, the first octet of the
message identifies the type of message:
'90'h - an AUTH_ELS, see Table 6 in FC-SP,
'40'h - an AUTH_ILS, see Table 3 in FC-SP, or
'41'h - an B_AUTH_ILS, see Table 5 in FC-SP.
and the remainder of the message may be truncated."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Tables 3, 5 and 6."
::= { t11FcSpAuRejectEntry 6 }
t11FcSpAuRejReasonCode OBJECT-TYPE
SYNTAX T11FcSpAuthRejectReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason code with which this AUTH message was
rejected."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 17, 48, 52."
::= { t11FcSpAuRejectEntry 7 }
t11FcSpAuRejReasonCodeExp OBJECT-TYPE
SYNTAX T11FcSpAuthRejReasonCodeExp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason code explanation with which this AUTH
message was rejected."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 17, 48, 52."
::= { t11FcSpAuRejectEntry 8 }
--
-- Notifications
--
t11FcSpAuRejectSentNotify NOTIFICATION-TYPE
OBJECTS { t11FamLocalSwitchWwn,
t11FcSpAuRejAuthMsgString,
De Santi, et al. Standards Track [Page 48]
RFC 5324 MIB for FC-SP September 2008
t11FcSpAuRejType,
t11FcSpAuRejReasonCode,
t11FcSpAuRejReasonCodeExp }
STATUS current
DESCRIPTION
"This notification indicates that a Switch (identified
by the value of t11FamLocalSwitchWwn) has sent a reject
message of the type indicated by t11FcSpAuRejType in
response to an AUTH message.
The content of the rejected AUTH message is given by the
value of t11FcSpAuRejAuthMsgString. The values of the
Reason Code and Reason Code Explanation in the
AUTH_Reject/SW_RJT/LS_RJT are indicated by the values of
t11FcSpAuRejReasonCode and t11FcSpAuRejReasonCodeExp."
::= { t11FcSpAuMIBNotifications 1 }
t11FcSpAuRejectReceivedNotify NOTIFICATION-TYPE
OBJECTS { t11FamLocalSwitchWwn,
t11FcSpAuRejAuthMsgString,
t11FcSpAuRejType,
t11FcSpAuRejReasonCode,
t11FcSpAuRejReasonCodeExp }
STATUS current
DESCRIPTION
"This notification indicates that a Switch (identified
by the value of t11FamLocalSwitchWwn) has received a
reject message of the type indicated by t11FcSpAuRejType
in response to an AUTH message.
The content of the rejected AUTH message is given by the
value of t11FcSpAuRejAuthMsgString. The values of the
Reason Code and Reason Code Explanation in the
AUTH_Reject/SW_RJT/LS_RJT are indicated by the values of
t11FcSpAuRejReasonCode and t11FcSpAuRejReasonCodeExp."
::= { t11FcSpAuMIBNotifications 2 }
--
-- Conformance
--
t11FcSpAuMIBCompliances
OBJECT IDENTIFIER ::= { t11FcSpAuMIBConformance 1 }
t11FcSpAuMIBGroups
OBJECT IDENTIFIER ::= { t11FcSpAuMIBConformance 2 }
t11FcSpAuMIBCompliance MODULE-COMPLIANCE
STATUS current
De Santi, et al. Standards Track [Page 49]
RFC 5324 MIB for FC-SP September 2008
DESCRIPTION
"The compliance statement for entities that
implement one or more of the Authentication Protocols
defined in FC-SP."
MODULE -- this module
MANDATORY-GROUPS { t11FcSpAuGeneralGroup,
t11FcSpAuRejectedGroup,
t11FcSpAuNotificationGroup }
GROUP t11FcSpAuIfStatsGroup
DESCRIPTION
"These counters, of particular FC-SP messages and
events, are mandatory only for those systems that
count such messages/events."
-- Write access is not required for any objects in this MIB module:
OBJECT t11FcSpAuStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpAuSendRejNotifyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpAuRcvRejNotifyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpAuDefaultLifetime
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpAuDefaultLifetimeUnits
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpAuRejectMaxRows
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
De Santi, et al. Standards Track [Page 50]
RFC 5324 MIB for FC-SP September 2008
::= { t11FcSpAuMIBCompliances 1 }
-- Units of Conformance
t11FcSpAuGeneralGroup OBJECT-GROUP
OBJECTS { t11FcSpAuServerProtocol,
t11FcSpAuStorageType,
t11FcSpAuSendRejNotifyEnable,
t11FcSpAuRcvRejNotifyEnable,
t11FcSpAuDefaultLifetime,
t11FcSpAuDefaultLifetimeUnits,
t11FcSpAuRejectMaxRows,
t11FcSpAuDhChapHashFunctions,
t11FcSpAuDhChapDhGroups,
t11FcSpAuFcapHashFunctions,
t11FcSpAuFcapCertsSignFunctions,
t11FcSpAuFcapDhGroups,
t11FcSpAuFcpapHashFunctions,
t11FcSpAuFcpapDhGroups,
t11FcSpAuIfStatTimeouts }
STATUS current
DESCRIPTION
"A collection of objects for the capabilities and
configuration parameters of FC-SP's Authentication
Protocols. The inclusion of t11FcSpAuIfStatTimeouts
in this group provides information on mappings of
Authentication entities onto interfaces."
::= { t11FcSpAuMIBGroups 1 }
t11FcSpAuIfStatsGroup OBJECT-GROUP
OBJECTS { t11FcSpAuIfStatInAcceptedMsgs,
t11FcSpAuIfStatInLsSwRejectedMsgs,
t11FcSpAuIfStatInAuthRejectedMsgs,
t11FcSpAuIfStatOutAcceptedMsgs,
t11FcSpAuIfStatOutLsSwRejectedMsgs,
t11FcSpAuIfStatOutAuthRejectedMsgs }
STATUS current
DESCRIPTION
"A collection of objects for monitoring the
operations of FC-SP's Authentication Protocols."
::= { t11FcSpAuMIBGroups 2 }
t11FcSpAuRejectedGroup OBJECT-GROUP
OBJECTS { t11FcSpAuRejDirection,
t11FcSpAuRejType,
t11FcSpAuRejAuthMsgString,
t11FcSpAuRejReasonCode,
t11FcSpAuRejReasonCodeExp }
De Santi, et al. Standards Track [Page 51]
RFC 5324 MIB for FC-SP September 2008
STATUS current
DESCRIPTION
"A collection of objects holding information concerning
FC-SP Authentication Protocol transactions that were
recently rejected with an AUTH_Reject, with an SW_RJT,
or with an LS_RJT."
::= { t11FcSpAuMIBGroups 3 }
t11FcSpAuNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { t11FcSpAuRejectSentNotify,
t11FcSpAuRejectReceivedNotify }
STATUS current
DESCRIPTION
"A collection of notifications for use in the management
of FC-SP's Authentication Protocols."
::= { t11FcSpAuMIBGroups 4 }
END
6.3. The T11-FC-SP-ZONING-MIB Module
--*******************************************************************
-- FC-SP Zoning
--
T11-FC-SP-ZONING-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE, mib-2,
Counter32
FROM SNMPv2-SMI -- [RFC2578]
TruthValue FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
ifIndex FROM IF-MIB -- [RFC2863]
t11ZsServerEntry,
t11ZsStatsEntry,
t11ZsNotifyControlEntry,
t11ZsFabricIndex FROM T11-FC-ZONE-SERVER-MIB -- [RFC4936]
T11FcSpPolicyHashValue,
T11FcSpPolicyHashFormat,
T11FcSpHashCalculationStatus
FROM T11-FC-SP-TC-MIB;
t11FcSpZoningMIB MODULE-IDENTITY
LAST-UPDATED "200808200000Z"
De Santi, et al. Standards Track [Page 52]
RFC 5324 MIB for FC-SP September 2008
ORGANIZATION "This MIB module was developed through the
coordinated effort of two organizations:
T11 began the development and the IETF (in
the IMSS Working Group) finished it."
CONTACT-INFO
" Claudio DeSanti
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
EMail: cds@cisco.com
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
Email: kzm@cisco.com"
DESCRIPTION
"This MIB module specifies the extensions to the
T11-FC-ZONE-SERVER-MIB module that are necessary for the
management of Fibre Channel's FC-SP Zoning Servers, as
defined in the FC-SP specification.
The persistence of values written to these MIB objects is
the same as the persistence of the objects they extend,
i.e., it is given by the value of the relevant instance of
t11ZsServerDatabaseStorageType (defined in the
T11-FC-ZONE-SERVER-MIB module).
Copyright (C) The IETF Trust (2008). This version
of this MIB module is part of RFC 5324; see the RFC
itself for full legal notices."
REVISION "200808200000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC 5324."
::= { mib-2 177 }
t11FcSpZsMIBNotifications OBJECT IDENTIFIER ::= { t11FcSpZoningMIB 0 }
t11FcSpZsMIBObjects OBJECT IDENTIFIER ::= { t11FcSpZoningMIB 1 }
t11FcSpZsMIBConformance OBJECT IDENTIFIER ::= { t11FcSpZoningMIB 2 }
t11FcSpZsConfiguration OBJECT IDENTIFIER ::= { t11FcSpZsMIBObjects 1 }
t11FcSpZsStatistics OBJECT IDENTIFIER ::= { t11FcSpZsMIBObjects 2 }
--
-- Augmenting the table of Zone Servers
--
t11FcSpZsServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpZsServerEntry
De Santi, et al. Standards Track [Page 53]
RFC 5324 MIB for FC-SP September 2008
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which provides FC-SP-specific information about
the Zone Servers on each Fabric in one or more Switches."
::= { t11FcSpZsConfiguration 1 }
t11FcSpZsServerEntry OBJECT-TYPE
SYNTAX T11FcSpZsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information relevant to FC-SP
for a particular Zone Server for a particular Fabric
on a particular Switch. The Fabric and Switch are
identified in the same manner as in t11ZsServerEntry."
AUGMENTS { t11ZsServerEntry }
::= { t11FcSpZsServerTable 1 }
T11FcSpZsServerEntry ::= SEQUENCE {
t11FcSpZsServerCapabilityObject BITS,
t11FcSpZsServerEnabled TruthValue,
t11FcSpZoneSetHashStatus T11FcSpHashCalculationStatus,
t11FcSpActiveZoneSetHashType T11FcSpPolicyHashFormat,
t11FcSpActiveZoneSetHash T11FcSpPolicyHashValue,
t11FcSpZoneSetDatabaseHashType T11FcSpPolicyHashFormat,
t11FcSpZoneSetDatabaseHash T11FcSpPolicyHashValue
}
t11FcSpZsServerCapabilityObject OBJECT-TYPE
SYNTAX BITS {
fcSpZoning(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Capabilities of the Zone Server for the particular Fabric
on the particular Switch, with respect to FC-SP Zoning:
fcSpZoning -- set to 1 to indicate the Switch is
capable of supporting FC-SP Zoning.
"
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 184."
::= { t11FcSpZsServerEntry 1 }
De Santi, et al. Standards Track [Page 54]
RFC 5324 MIB for FC-SP September 2008
t11FcSpZsServerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the Zone Server for the
particular Fabric on the particular Switch, is operating in
FC-SP Zoning mode."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 185."
::= { t11FcSpZsServerEntry 2 }
t11FcSpZoneSetHashStatus OBJECT-TYPE
SYNTAX T11FcSpHashCalculationStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When read, the value of this object is either:
correct -- the corresponding instances of both
t11FcSpActiveZoneSetHash and
t11FcSpZoneSetDatabaseHash contain
the correct hash values; or
stale -- the corresponding instances of
t11FcSpActiveZoneSetHash and
t11FcSpZoneSetDatabaseHash contain
stale (possibly incorrect) values;
Writing a value of 'calculate' is a request to re-calculate
and update the values of the corresponding instances of both
t11FcSpActiveZoneSetHash and t11FcSpZoneSetDatabaseHash.
Writing a value of 'correct' or 'stale' to this object
is an error (e.g., 'wrongValue').
When the Active Zone Set and/or the Zone Set Database are
updated, it is common that multiple changes need to be made
at the same time. In such circumstances, the use of this
object allows the hash values to be updated only once after
all changes, rather than repeatedly/after each individual
change.
If and when the corresponding instance of
t11ZsServerDatabaseStorageType has the value 'permanent(4)',
then if write access is supported to any instance of a
read-write object in any row of any table governed by the
'permanent' value of t11ZsServerDatabaseStorageType, then
De Santi, et al. Standards Track [Page 55]
RFC 5324 MIB for FC-SP September 2008
write access to the corresponding instance of this object
must also be supported."
REFERENCE
"t11ZsServerDatabaseStorageType in
'Fibre Channel Zone Server MIB', RFC 4936, August 2007."
DEFVAL { stale }
::= { t11FcSpZsServerEntry 3 }
t11FcSpActiveZoneSetHashType OBJECT-TYPE
SYNTAX T11FcSpPolicyHashFormat
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The format used for the hash value contained in the
corresponding instance of t11FcSpActiveZoneSetHash."
::= { t11FcSpZsServerEntry 4 }
t11FcSpActiveZoneSetHash OBJECT-TYPE
SYNTAX T11FcSpPolicyHashValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the hash for the current Active Zone Set.
The format of this value is given by the corresponding
instance of t11FcSpActiveZoneSetHashType."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 187."
::= { t11FcSpZsServerEntry 5 }
t11FcSpZoneSetDatabaseHashType OBJECT-TYPE
SYNTAX T11FcSpPolicyHashFormat
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The format used for the hash value contained in the
corresponding instance of t11FcSpZoneSetDatabaseHash."
::= { t11FcSpZsServerEntry 6 }
t11FcSpZoneSetDatabaseHash OBJECT-TYPE
SYNTAX T11FcSpPolicyHashValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the hash for the current Zone Set Database.
The format of this value is given by the corresponding
instance of t11FcSpZoneSetDatabaseHashType."
De Santi, et al. Standards Track [Page 56]
RFC 5324 MIB for FC-SP September 2008
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 187."
::= { t11FcSpZsServerEntry 7 }
--
-- Additional Statistics for FC-SP Zoning
--
t11FcSpZsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpZsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of statistics specific to FC-SP that are
maintained by Zone Servers."
::= { t11FcSpZsStatistics 1 }
t11FcSpZsStatsEntry OBJECT-TYPE
SYNTAX T11FcSpZsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of statistics specific to FC-SP for a particular
Zone Server for a particular Fabric on a particular Switch.
The Fabric and Switch are identified in the same manner as
in t11ZsStatsEntry."
AUGMENTS { t11ZsStatsEntry }
::= { t11FcSpZsStatsTable 1 }
T11FcSpZsStatsEntry ::= SEQUENCE {
t11FcSpZsSPCMITrequestsSent Counter32,
t11FcSpZsSPCMITrequestsAccepted Counter32,
t11FcSpZsSPCMITrequestsRejected Counter32,
t11FcSpZsZcpRequestsSent Counter32,
t11FcSpZsZcpRequestsAccepted Counter32,
t11FcSpZsZcpRequestsRejected Counter32,
t11FcSpZsZirRequestsAccepted Counter32,
t11FcSpZsZirRequestsRejected Counter32
}
t11FcSpZsSPCMITrequestsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SP Commit Zone Changes (SPCMIT) operation
De Santi, et al. Standards Track [Page 57]
RFC 5324 MIB for FC-SP September 2008
requests sent by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 1 }
t11FcSpZsSPCMITrequestsAccepted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SP Commit Zone Changes (SPCMIT) operation
requests received and accepted by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 2 }
t11FcSpZsSPCMITrequestsRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SP Commit Zone Changes (SPCMIT) operation
requests received but rejected by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 3 }
t11FcSpZsZcpRequestsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Zoning Check Protocol (ZCP) requests sent
by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 4 }
t11FcSpZsZcpRequestsAccepted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Zoning Check Protocol (ZCP) requests received
De Santi, et al. Standards Track [Page 58]
RFC 5324 MIB for FC-SP September 2008
and accepted by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 5 }
t11FcSpZsZcpRequestsRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Zoning Check Protocol (ZCP) requests received
but rejected by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 6 }
t11FcSpZsZirRequestsAccepted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Zoning Information Request (ZIR) requests
received and accepted by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 7 }
t11FcSpZsZirRequestsRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Zoning Information Request (ZIR) requests
received but rejected by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 8 }
--
-- Enable/Disable for Notifications
--
t11FcSpZsNotifyControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpZsNotifyControlEntry
De Santi, et al. Standards Track [Page 59]
RFC 5324 MIB for FC-SP September 2008
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of control information for notifications
generated due to Zone Server events related to
FC-SP Zoning."
::= { t11FcSpZsConfiguration 2 }
t11FcSpZsNotifyControlEntry OBJECT-TYPE
SYNTAX T11FcSpZsNotifyControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry is an augmentation of the notification control
information for a Zone Server for a particular Fabric on a
particular Switch. The Fabric and Switch are identified in
the same manner as in t11ZsNotifyControlEntry."
AUGMENTS { t11ZsNotifyControlEntry }
::= { t11FcSpZsNotifyControlTable 1 }
T11FcSpZsNotifyControlEntry ::= SEQUENCE {
t11FcSpZsNotifyJoinSuccessEnable TruthValue,
t11FcSpZsNotifyJoinFailureEnable TruthValue
}
t11FcSpZsNotifyJoinSuccessEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether
t11FcSpZsFabricJoinFailureNotify notifications should be
generated by the Zone Server for this Fabric."
::= { t11FcSpZsNotifyControlEntry 1 }
t11FcSpZsNotifyJoinFailureEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether
t11FcSpZsFabricJoinSuccessNotify notifications should be
generated by the Zone Server for this Fabric."
::= { t11FcSpZsNotifyControlEntry 2 }
--
-- Notifications
--
De Santi, et al. Standards Track [Page 60]
RFC 5324 MIB for FC-SP September 2008
t11FcSpZsFabricJoinSuccessNotify NOTIFICATION-TYPE
OBJECTS { ifIndex, t11ZsFabricIndex }
STATUS current
DESCRIPTION
"This notification indicates that a Switch that is part
of one Fabric (indicated by the value of t11ZsFabricIndex)
has successfully joined (on the interface indicated by the
value of ifIndex) with a Switch that is part of another
Fabric.
If multiple Virtual Fabrics are configured on an interface,
and all are successfully joined at the same time, and if
the agent so chooses, then it can generate just one
notification in which t11ZsFabricIndex has the value 4096."
::= { t11FcSpZsMIBNotifications 1 }
t11FcSpZsFabricJoinFailureNotify NOTIFICATION-TYPE
OBJECTS { ifIndex, t11ZsFabricIndex }
STATUS current
DESCRIPTION
"This notification indicates that an E_Port on the local
Switch has entered the Isolated state because a join
between two Fabrics failed. The failure occurred on the
local Fabric indicated by the value of t11ZsFabricIndex,
on the interface indicated by the value of ifIndex.
If multiple Virtual Fabrics are configured on an interface,
and all have a failure to join at the same time, and if the
agent so chooses, then it can generate just one notification
in which t11ZsFabricIndex has the value 4096."
::= { t11FcSpZsMIBNotifications 2 }
--
-- Conformance
--
t11FcSpZsMIBCompliances
OBJECT IDENTIFIER ::= { t11FcSpZsMIBConformance 1 }
t11FcSpZsMIBGroups OBJECT IDENTIFIER ::= { t11FcSpZsMIBConformance 2 }
t11FcSpZsMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that
implement the extensions specified in FC-SP for
Fibre Channel's Zone Server."
MODULE -- this module
De Santi, et al. Standards Track [Page 61]
RFC 5324 MIB for FC-SP September 2008
MANDATORY-GROUPS { t11FcSpZsObjectsGroup,
t11FcSpZsNotificationControlGroup,
t11FcSpZsNotificationGroup }
GROUP t11FcSpZsStatisticsGroup
DESCRIPTION
"These counters, containing Zone Server statistics,
are mandatory only for those systems that count
such events."
-- Write access is not required for any objects in this MIB module:
OBJECT t11FcSpZsServerEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpZoneSetHashStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpZsNotifyJoinSuccessEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpZsNotifyJoinFailureEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { t11FcSpZsMIBCompliances 1 }
-- Units of Conformance
t11FcSpZsObjectsGroup OBJECT-GROUP
OBJECTS { t11FcSpZsServerCapabilityObject,
t11FcSpZsServerEnabled,
t11FcSpZoneSetHashStatus,
t11FcSpActiveZoneSetHashType,
t11FcSpActiveZoneSetHash,
t11FcSpZoneSetDatabaseHashType,
t11FcSpZoneSetDatabaseHash
}
STATUS current
DESCRIPTION
"A collection of objects for Zone configuration
De Santi, et al. Standards Track [Page 62]
RFC 5324 MIB for FC-SP September 2008
information of a Zone Server capable of
operating in FC-SP Zoning mode."
::= { t11FcSpZsMIBGroups 1 }
t11FcSpZsNotificationControlGroup OBJECT-GROUP
OBJECTS { t11FcSpZsNotifyJoinSuccessEnable,
t11FcSpZsNotifyJoinFailureEnable
}
STATUS current
DESCRIPTION
"A collection of notification control objects for
monitoring Zone Server failures specific to FC-SP."
::= { t11FcSpZsMIBGroups 2 }
t11FcSpZsStatisticsGroup OBJECT-GROUP
OBJECTS { t11FcSpZsSPCMITrequestsSent,
t11FcSpZsSPCMITrequestsAccepted,
t11FcSpZsSPCMITrequestsRejected,
t11FcSpZsZcpRequestsSent,
t11FcSpZsZcpRequestsAccepted,
t11FcSpZsZcpRequestsRejected,
t11FcSpZsZirRequestsAccepted,
t11FcSpZsZirRequestsRejected
}
STATUS current
DESCRIPTION
"A collection of objects for collecting Zone Server
statistics which are specific to FC-SP."
::= { t11FcSpZsMIBGroups 3 }
t11FcSpZsNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { t11FcSpZsFabricJoinSuccessNotify,
t11FcSpZsFabricJoinFailureNotify
}
STATUS current
DESCRIPTION
"A collection of notification(s) for monitoring
Zone Server events that are specific to FC-SP."
::= { t11FcSpZsMIBGroups 4 }
END
De Santi, et al. Standards Track [Page 63]
RFC 5324 MIB for FC-SP September 2008
6.4. The T11-FC-SP-POLICY-MIB Module
--*******************************************************************
-- FC-SP Policy
--
T11-FC-SP-POLICY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2,
Counter32, Unsigned32
FROM SNMPv2-SMI -- [RFC2578]
RowStatus, StorageType, TimeStamp,
TruthValue FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
InetAddress, InetPortNumber,
InetAddressType FROM INET-ADDRESS-MIB -- [RFC4001]
fcmInstanceIndex,
FcNameIdOrZero,
FcDomainIdOrZero FROM FC-MGMT-MIB -- [RFC4044]
T11NsGs4RejectReasonCode
FROM T11-FC-NAME-SERVER-MIB -- [RFC4438]
T11FabricIndex FROM T11-TC-MIB -- [RFC4439]
T11FcSpAlphaNumName,
T11FcSpAlphaNumNameOrAbsent,
T11FcSpPolicyName,
T11FcSpPolicyNameType,
T11FcSpPolicyObjectType,
T11FcSpPolicyHashFormat,
T11FcSpPolicyHashValue,
T11FcSpHashCalculationStatus FROM T11-FC-SP-TC-MIB;
t11FcSpPolicyMIB MODULE-IDENTITY
LAST-UPDATED "200808200000Z"
ORGANIZATION "This MIB module was developed through the
coordinated effort of two organizations:
T11 began the development and the IETF (in
the IMSS Working Group) finished it."
CONTACT-INFO
" Claudio DeSanti
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
EMail: cds@cisco.com
De Santi, et al. Standards Track [Page 64]
RFC 5324 MIB for FC-SP September 2008
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
Email: kzm@cisco.com"
DESCRIPTION
"This MIB module specifies the management information
required to manage Fabric Policies as defined by Fibre
Channel's FC-SP specification.
FC-SP uses the term 'Policy Objects', sometimes abbreviated
to just 'Objects', to refer to containers used to hold the
data by which Fabric Policies are specified/stored. This
obviously has the potential to cause confusion between
'Policy Objects' and 'MIB objects'. The DESCRIPTIONs in
this MIB module attempt to avoid such confusion by the use
of different adjectives and capitalization, even though such
mechanisms are less effective when used in descriptors.
Some types of Policy Objects contain multiple items of
information, each of which are held in the same format
within the Policy Object. In such cases, FC-SP uses the
term 'Entry' to describe each instance of the common format.
For example, FC-SP defines an Attribute Policy Object as
containing one or more 'Attribute Entries'. Again, this MIB
module attempts to avoid confusion by the use of adjectives
and capitalization to distinguish an Entry within a Policy
Object from an entry within a MIB table.
A Fabric's database of Policy Objects consists of a set of
active Objects that are to be enforced by that Fabric, as
well as non-active Objects that are not enforced.
Operations defined (in FC-SP) for Policy Management are:
- Add/Get/Remove operations on individual non-active
Policy Objects,
- Activate/Deactivate operations on a Policy Summary
Object, and
- Get operations on the active Policy Summary Object
and/or on individual active Policy Objects.
This MIB module has five parts:
1) Active Policy Objects - read-only MIB objects
representing the set of active Policy Objects for
each Fabric,
2) Activate/Deactivate Operations
De Santi, et al. Standards Track [Page 65]
RFC 5324 MIB for FC-SP September 2008
- a read-write MIB object to invoke an Activate
operation of the policies specified via a non-active
Policy Summary Object, and
- a read-write MIB object to invoke a Deactivate
operation.
3) Non-active Policy Objects
- read-create MIB objects to allow the creation of
non-active Policy Summary Objects (which reference
non-active Policy Objects), and
- read-create MIB objects representing non-active
Policy Objects.
4) Statistics
5) Control information and Notifications
Copyright (C) The IETF Trust (2008). This version
of this MIB module is part of RFC 5324; see the RFC
itself for full legal notices."
REVISION "200808200000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC 5324."
::= { mib-2 178 }
t11FcSpPoMIBNotifications OBJECT IDENTIFIER ::= { t11FcSpPolicyMIB 0 }
t11FcSpPoMIBObjects OBJECT IDENTIFIER ::= { t11FcSpPolicyMIB 1 }
t11FcSpPoMIBConformance OBJECT IDENTIFIER ::= { t11FcSpPolicyMIB 2 }
t11FcSpPoActive OBJECT IDENTIFIER ::= { t11FcSpPoMIBObjects 1 }
t11FcSpPoOperations OBJECT IDENTIFIER ::= { t11FcSpPoMIBObjects 2 }
t11FcSpPoNonActive OBJECT IDENTIFIER ::= { t11FcSpPoMIBObjects 3 }
t11FcSpPoStatistics OBJECT IDENTIFIER ::= { t11FcSpPoMIBObjects 4 }
t11FcSpPoControl OBJECT IDENTIFIER ::= { t11FcSpPoMIBObjects 5 }
--
-- Part 1 - Active Policy Objects
--
t11FcSpPoTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing top-level information about active
FC-SP policies on various Fabrics."
::= { t11FcSpPoActive 1 }
t11FcSpPoEntry OBJECT-TYPE
De Santi, et al. Standards Track [Page 66]
RFC 5324 MIB for FC-SP September 2008
SYNTAX T11FcSpPoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about active FC-SP policies
for a particular Fabric, managed as part of the Fibre
Channel management instance identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex }
::= { t11FcSpPoTable 1 }
T11FcSpPoEntry ::= SEQUENCE {
t11FcSpPoFabricIndex T11FabricIndex,
t11FcSpPoPolicySummaryObjName T11FcSpAlphaNumName,
t11FcSpPoAdminFabricName FcNameIdOrZero,
t11FcSpPoActivatedTimeStamp TimeStamp
}
t11FcSpPoFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Fabric."
::= { t11FcSpPoEntry 1 }
t11FcSpPoPolicySummaryObjName OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of this Fabric's (active) Policy Summary Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.3 and table 104."
::= { t11FcSpPoEntry 2 }
t11FcSpPoAdminFabricName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administratively-specified name for this Fabric, as
specified in the active Switch Membership List Object.
This value is meaningful only when Static Domain_IDs are
in use in a Fabric (see FC-SW-4). Static Domain_IDs are
administratively enabled by a setting of the Switch Flags
De Santi, et al. Standards Track [Page 67]
RFC 5324 MIB for FC-SP September 2008
in each Switch Entry in the Switch Membership List Object.
If Static Domain_IDs are not in use, this value might be
'0000000000000000'h.
The t11FamEnable, t11FamFabricName, and
t11FamConfigDomainIdType objects defined in the
T11-FC-FABRIC-ADDR-MGR-MIB module are also concerned with
the use of an administratively-specified name for a Fabric
and Static Domain_IDs. When FC-SP Policy is in use in a
Fabric, the values of t11FamEnable, t11FamFabricName, and
t11FamConfigDomainIdType must be read-only and reflect the
active Policy Objects. For example, the value of
t11FamFabricName must reflect the value of
t11FcSpPoAdminFabricName."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 108.
- Fibre Channel - Switch Fabric-4 (FC-SW-4),
ANSI INCITS 418-2006, April 2006, section 7.1.
- Fibre Channel Fabric Address Manager MIB', RFC 4439,
March 2006."
::= { t11FcSpPoEntry 3 }
t11FcSpPoActivatedTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at which this Fabric's Policy
Summary Object was last activated, or zero if the same
Policy Summary Object has been active since the last
restart of the management system."
::= { t11FcSpPoEntry 4 }
--
-- The table of Policy Summary Objects
--
t11FcSpPoSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information about active Policy Objects listed
within FC-SP Policy Summary Objects."
::= { t11FcSpPoActive 2 }
De Santi, et al. Standards Track [Page 68]
RFC 5324 MIB for FC-SP September 2008
t11FcSpPoSummaryEntry OBJECT-TYPE
SYNTAX T11FcSpPoSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one of the active
Policy Objects listed within the Policy Summary Object for
the Fabric identified by t11FcSpPoFabricIndex and managed
within the Fibre Channel management instance identified by
fcmInstanceIndex.
How many Policy Objects of a given type can be active at
any one time for a given Fabric depends on the type, as
specified in FC-SP. For some types, it is one per Fabric;
for other types, more than one can be active per Fabric.
In both of these cases, the absence of any entries in this
table for a particular type is equivalent to there being one
Policy Object of that type that is empty, e.g., a Switch
Membership List Object that identifies zero Switches."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.3 and table 104."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoSummaryPolicyNameType,
t11FcSpPoSummaryPolicyName }
::= { t11FcSpPoSummaryTable 1 }
T11FcSpPoSummaryEntry ::= SEQUENCE {
t11FcSpPoSummaryPolicyNameType T11FcSpPolicyNameType,
t11FcSpPoSummaryPolicyName T11FcSpPolicyName,
t11FcSpPoSummaryPolicyType T11FcSpPolicyObjectType,
t11FcSpPoSummaryHashFormat T11FcSpPolicyHashFormat,
t11FcSpPoSummaryHashValue T11FcSpPolicyHashValue
}
t11FcSpPoSummaryPolicyNameType OBJECT-TYPE
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
alphaNumericName(7)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The combination of t11FcSpPoSummaryPolicyNameType and
t11FcSpPoSummaryPolicyName specify the name of the Policy
Object contained in the Policy Summary Object.
De Santi, et al. Standards Track [Page 69]
RFC 5324 MIB for FC-SP September 2008
The type of name is 'nodeName' if the value of the
corresponding instance of t11FcSpPoSummaryPolicyType is
'switchConnectivity', or 'alphaNumericName' otherwise."
::= { t11FcSpPoSummaryEntry 1 }
t11FcSpPoSummaryPolicyName OBJECT-TYPE
SYNTAX T11FcSpPolicyName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The combination of t11FcSpPoSummaryPolicyNameType and
t11FcSpPoSummaryPolicyName specify the name of the Policy
Object contained in the Policy Summary Object."
::= { t11FcSpPoSummaryEntry 2 }
t11FcSpPoSummaryPolicyType OBJECT-TYPE
SYNTAX T11FcSpPolicyObjectType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 'Identifier' that specifies the type of this
Policy Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.3.1 and table 104."
::= { t11FcSpPoSummaryEntry 3 }
t11FcSpPoSummaryHashFormat OBJECT-TYPE
SYNTAX T11FcSpPolicyHashFormat
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The format of this Policy Object's hash value as
contained in the corresponding instance of the
t11FcSpPoSummaryHashValue object."
::= { t11FcSpPoSummaryEntry 4 }
t11FcSpPoSummaryHashValue OBJECT-TYPE
SYNTAX T11FcSpPolicyHashValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hash value of this Policy Object, in the format
identified by the corresponding instance of the
t11FcSpPoSummaryHashFormat object."
::= { t11FcSpPoSummaryEntry 5 }
De Santi, et al. Standards Track [Page 70]
RFC 5324 MIB for FC-SP September 2008
--
-- Switch Entries in Active Switch Membership List Objects
--
t11FcSpPoSwMembTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoSwMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Switch Entries in active Switch Membership List
Objects.
One Switch Membership List Object is represented by all
of the rows of this table that have the same values
of fcmInstanceIndex and t11FcSpPoFabricIndex."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoActive 3 }
t11FcSpPoSwMembEntry OBJECT-TYPE
SYNTAX T11FcSpPoSwMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Switch Entry
within the active Switch Membership List Object for the
Fabric identified by t11FcSpPoFabricIndex and managed
within the Fibre Channel management instance identified
by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoSwMembSwitchNameType, t11FcSpPoSwMembSwitchName }
::= { t11FcSpPoSwMembTable 1 }
T11FcSpPoSwMembEntry ::= SEQUENCE {
t11FcSpPoSwMembSwitchNameType T11FcSpPolicyNameType,
t11FcSpPoSwMembSwitchName FcNameIdOrZero,
t11FcSpPoSwMembSwitchFlags BITS,
t11FcSpPoSwMembDomainID FcDomainIdOrZero,
t11FcSpPoSwMembPolicyDataRole INTEGER,
t11FcSpPoSwMembAuthBehaviour BITS,
t11FcSpPoSwMembAttribute T11FcSpAlphaNumNameOrAbsent
}
t11FcSpPoSwMembSwitchNameType OBJECT-TYPE
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
De Santi, et al. Standards Track [Page 71]
RFC 5324 MIB for FC-SP September 2008
restrictedNodeName(2),
wildcard(5),
restrictedWildcard(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the value of this object is 'nodeName' or
'restrictedNodeName', then the combination of
this object and t11FcSpPoSwMembSwitchName specify the
Switch Name of this Switch Entry.
The membership is restricted or unrestricted based on the
name type. Restricted membership means that the Switch is
not allowed to be part of the Fabric unless allowed by a
specific Switch Connectivity Object. Unrestricted
membership means that the Switch is allowed to be part of
the Fabric unless disallowed by a specific Switch
Connectivity Object.
The values of 'wildcard' and 'restrictedWildcard' provide
the means to specify whether to allow/deny membership for
Switches not explicitly named in the Switch Membership
List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoSwMembEntry 1 }
t11FcSpPoSwMembSwitchName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the value of t11FcSpPoSwMembSwitchNameType is
'wildcard' or 'restrictedWildcard', this object has the
value '0000000000000000'h.
Otherwise, the combination of t11FcSpPoSwMembSwitchNameType
and this object specify the Switch Name of this Switch
Entry."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoSwMembEntry 2 }
De Santi, et al. Standards Track [Page 72]
RFC 5324 MIB for FC-SP September 2008
t11FcSpPoSwMembSwitchFlags OBJECT-TYPE
SYNTAX BITS {
staticDomainID(0),
insistentDomainID(1),
serialPortsAccess(2),
physicalPortsAccess(3),
managerRole(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configurable options in respect to the administration
of Policy Objects at this Switch:
'staticDomainID' - if this bit is set, the Switch
uses the 'Static Domain_IDs behavior' (as defined in
FC-SW-4). This bit needs to have the same setting for all
Switches in a Fabric's Switch Membership List Object, or
else the Fabric will partition. If this bit is set, the
Domain_ID for the Switch is given by the corresponding
instance of t11FcSpPoSwMembDomainID.
'insistentDomainID' - if this bit is set, the
Switch uses the 'Insistent Domain_ID behavior' (see
t11FamConfigDomainId of T11-FC-FABRIC-ADDR-MGR-MIB), the
Domain_ID for the Switch is given by the corresponding
instance of t11FcSpPoSwMembDomainID.
'serialPortsAccess' - the Switch allows management
through serial ports when and only when this bit is set.
'physicalPortsAccess' - the Switch allows management
through the physical panel when and only when this bit
is set.
'managerRole' - the Switch is allowed to change
the Fabric Policy configuration (on receipt of any of the
EACA, Enhanced Stage Fabric Configuration (ESFC), Enhanced
Update Fabric Configuration (EUFC), ACA, SFC, or UFC
SW_ILSs) if and only if this bit is set.
Whenever a Fabric has Active Policy Objects, the value of
the t11FamConfigDomainIdType object defined in the
T11-FC-FABRIC-ADDR-MGR-MIB module must be read-only and
reflect the values of the 'staticDomainID' and
'insistentDomainID' bits of this object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
De Santi, et al. Standards Track [Page 73]
RFC 5324 MIB for FC-SP September 2008
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 112.
- Fibre Channel - Switch Fabric-4 (FC-SW-4),
ANSI INCITS 418-2006, April 2006, section 7.1.
- t11FamConfigDomainIdType, T11-FC-FABRIC-ADDR-MGR-MIB,
Fibre Channel Fabric Address Manager MIB, RFC 4439."
::= { t11FcSpPoSwMembEntry 3 }
t11FcSpPoSwMembDomainID OBJECT-TYPE
SYNTAX FcDomainIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The specified Domain_ID value when either of the
'staticDomainID' or 'insistentDomainID' bits are set in
the corresponding instance of t11FcSpPoSwMembSwitchFlags.
Whenever a Fabric has Active Policy Objects, the value
of the t11FamConfigDomainId object defined in the
T11-FC-FABRIC-ADDR-MGR-MIB module must be read-only and
reflect the value of this object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and tables 111 and 112.
- t11FamConfigDomainId, T11-FC-FABRIC-ADDR-MGR-MIB,
Fibre Channel Fabric Address Manager MIB, RFC 4439."
::= { t11FcSpPoSwMembEntry 4 }
t11FcSpPoSwMembPolicyDataRole OBJECT-TYPE
SYNTAX INTEGER {
client(1),
autonomous(2),
server(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role of the Switch in terms of which Policy data
it retains/maintains:
'client' - the Switch operates as a Client Switch.
A Client Switch maintains its own Switch Connectivity
Object and all Fabric-wide List Objects. If FC-SP
Zoning is used, a Client Switch maintains only the
subset of the Active Zone Set that it requires to
enforce the current Fabric Zoning configuration.
De Santi, et al. Standards Track [Page 74]
RFC 5324 MIB for FC-SP September 2008
'autonomous' - the Switch operates as an Autonomous
Switch. An Autonomous Switch maintains its own Switch
Connectivity Object and all Fabric-wide List Objects.
This is the same as 'client' except that if FC-SP Zoning
is used, an Autonomous Switch maintains a complete copy
of the Fabric Zoning Database.
'server' - the Switch operates as a Server Switch.
A Server Switch maintains all Fabric-wide List Objects
and the Switch Connectivity Objects of each Switch in
the Fabric. If FC-SP Zoning is used, a Server Switch
maintains a complete copy of the Fabric Zoning Database."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 113."
::= { t11FcSpPoSwMembEntry 5 }
t11FcSpPoSwMembAuthBehaviour OBJECT-TYPE
SYNTAX BITS {
mustAuthenticate(0),
rejectIsFailure(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication behaviour of the Switch:
'mustAuthenticate' - if this bit is set, all connections
between this Switch and neighbor Switches must be
authenticated.
'rejectIsFailure' - if this bit is set, the rejection of
an AUTH_Negotiate message must be considered as an
authentication failure by this Switch."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 114."
::= { t11FcSpPoSwMembEntry 6 }
t11FcSpPoSwMembAttribute OBJECT-TYPE
SYNTAX T11FcSpAlphaNumNameOrAbsent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of an active Attribute Policy Object that is
defined for this Switch, or the zero-length string. The
De Santi, et al. Standards Track [Page 75]
RFC 5324 MIB for FC-SP September 2008
zero-length string indicates that no Attribute Policy
Object is defined for this Switch."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoSwMembEntry 7 }
--
-- Node Entries in Active Node Membership List Objects
--
t11FcSpPoNoMembTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNoMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Node Entries in active Node Membership List
Objects.
One Node Membership List Object is represented by all
of the rows of this table that have the same values
of fcmInstanceIndex and t11FcSpPoFabricIndex."
::= { t11FcSpPoActive 4 }
t11FcSpPoNoMembEntry OBJECT-TYPE
SYNTAX T11FcSpPoNoMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Node Entry
within the active Node Membership List Object for the
Fabric identified by t11FcSpPoFabricIndex and managed
within the Fibre Channel management instance identified
by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNoMembNodeNameType, t11FcSpPoNoMembNodeName }
::= { t11FcSpPoNoMembTable 1 }
T11FcSpPoNoMembEntry ::= SEQUENCE {
t11FcSpPoNoMembNodeNameType T11FcSpPolicyNameType,
t11FcSpPoNoMembNodeName FcNameIdOrZero,
t11FcSpPoNoMembFlags BITS,
t11FcSpPoNoMembCtAccessIndex Unsigned32,
t11FcSpPoNoMembAttribute T11FcSpAlphaNumNameOrAbsent
}
t11FcSpPoNoMembNodeNameType OBJECT-TYPE
De Santi, et al. Standards Track [Page 76]
RFC 5324 MIB for FC-SP September 2008
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
restrictedNodeName(2),
portName(3),
restrictedPortName(4),
wildcard(5),
restrictedWildcard(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the value of this object is 'wildcard' or
'restrictedWildcard', this Node Entry applies to Nodes not
explicitly named in the Node Membership List Object.
Otherwise, the combination of this object and
t11FcSpPoNoMembNodeName specify the name of this Node Entry
in the active Node Membership List Object. A Node is
identified by its Node Name or by one or more of its Port
Names.
Restricted membership means that a Node is not allowed to be
connected to the Fabric unless allowed by a specific Switch
Connectivity Object. Unrestricted membership means that a
Node is allowed to be connected to the Fabric unless
disallowed by a specific Switch Connectivity Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 116."
::= { t11FcSpPoNoMembEntry 1 }
t11FcSpPoNoMembNodeName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the value of t11FcSpPoNoMembNodeNameType is
'wildcard' or 'restrictedWildcard', this object has the
value '0000000000000000'h.
Otherwise, the combination of t11FcSpPoNoMembNodeNameType
and this object specify the name of this Node Entry is the
active Node Membership List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 116."
De Santi, et al. Standards Track [Page 77]
RFC 5324 MIB for FC-SP September 2008
::= { t11FcSpPoNoMembEntry 2 }
t11FcSpPoNoMembFlags OBJECT-TYPE
SYNTAX BITS {
scsiEnclosureAccess(0),
authenticationRequired(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configurable options in respect to the administration
of Policy Objects at this Node:
'scsiEnclosureAccess' - the Node is allowed to
control any Switch through SCSI Enclosure Services if this
bit is set. If a Switch does not support SCSI Enclosure
Services, this bit is ignored.
'authenticationRequired' - the Node is required to
authenticate itself to any Switch to which it is connected
if and only if this bit is set."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 118."
::= { t11FcSpPoNoMembEntry 3 }
t11FcSpPoNoMembCtAccessIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of this object is zero, then access by this
Node to Generic Services is not limited by a Common
Transport Access Specifier.
Otherwise, the limits are specified by the set of Common
Transport Access Descriptors contained in those rows of
the t11FcSpPoCtDescrTable for the same Fabric and for which
the value of t11FcSpPoCtDescrSpecifierIndex is the same as
the value of this object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
section 7.1.4.1 and tables 118/119/120/121."
::= { t11FcSpPoNoMembEntry 4 }
t11FcSpPoNoMembAttribute OBJECT-TYPE
De Santi, et al. Standards Track [Page 78]
RFC 5324 MIB for FC-SP September 2008
SYNTAX T11FcSpAlphaNumNameOrAbsent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of an active Attribute Policy Object that is
defined for this Node, or the zero-length string. The
zero-length string indicates that no Attribute Policy
Object is defined for this Node."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 116."
::= { t11FcSpPoNoMembEntry 5 }
--
--
-- Common Transport Access Descriptors
--
t11FcSpPoCtDescrTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoCtDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Common Transport Access Descriptors being used
within active Policy Objects.
A Common Transport Access Specifier is a list of Common
Transport Access Descriptors that specify whether a Node
is allowed to access a Generic Service or Sub-Server.
An active Common Transport Access Specifier is represented
by all rows of this table that have the same values of
fcmInstanceIndex, t11FcSpPoFabricIndex, and
t11FcSpPoCtDescrSpecifierIndex."
::= { t11FcSpPoActive 5 }
t11FcSpPoCtDescrEntry OBJECT-TYPE
SYNTAX T11FcSpPoCtDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Common
Transport Access Descriptor of an active Common Transport
Access Specifier used within the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
De Santi, et al. Standards Track [Page 79]
RFC 5324 MIB for FC-SP September 2008
t11FcSpPoCtDescrSpecifierIndex, t11FcSpPoCtDescrIndex }
::= { t11FcSpPoCtDescrTable 1 }
T11FcSpPoCtDescrEntry ::= SEQUENCE {
t11FcSpPoCtDescrSpecifierIndex Unsigned32,
t11FcSpPoCtDescrIndex Unsigned32,
t11FcSpPoCtDescrFlags BITS,
t11FcSpPoCtDescrGsType OCTET STRING,
t11FcSpPoCtDescrGsSubType OCTET STRING
}
t11FcSpPoCtDescrSpecifierIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Common Transport Access Specifier within a Fabric."
::= { t11FcSpPoCtDescrEntry 1 }
t11FcSpPoCtDescrIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Common Transport Access Descriptor within a Common Transport
Access Specifier."
::= { t11FcSpPoCtDescrEntry 2 }
t11FcSpPoCtDescrFlags OBJECT-TYPE
SYNTAX BITS {
allow(0),
gsTypeWildcard(1),
gsSubTypeWildcard(2),
readOnly(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag bits that specify how access is to be limited by
this Common Transport Access Descriptor:
- allow -- access to the specified Generic Service and
Server is allowed if this bit is set, and is to be denied
if this bit is not set.
- gsTypeWildcard -- if this bit is set, the Generic Service
De Santi, et al. Standards Track [Page 80]
RFC 5324 MIB for FC-SP September 2008
to be allowed/denied is specified by the value of
t11FcSpPoCtDescrGsType. If this bit is set, then the
gsSubTypeWildcard bit must not be set.
- gsSubTypeWildcard -- if this bit is set, the Generic
Service to be allowed/denied is specified by the value of
t11FcSpPoCtDescrGsSubType. If this bit is set, then the
gsTypeWildcard bit must not be set.
- readOnly -- if this bit is set, then access is to be
granted only for reading."
::= { t11FcSpPoCtDescrEntry 3 }
t11FcSpPoCtDescrGsType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The GS_Type of the Generic Service (e.g., the FC-GS-5
Management Service) that is subject to access control.
This value is ignored if the gsTypeWildcard bit is not set
in the corresponding value of t11FcSpPoCtDescrFlags."
REFERENCE
"- Fibre Channel - Generic Services-5 (FC-GS-5),
ANSI INCITS 427-2006, section 4.3.2.4."
::= { t11FcSpPoCtDescrEntry 4 }
t11FcSpPoCtDescrGsSubType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The GS_Subtype of the Generic Server (e.g., the Fabric Zone
Server) that is subject to access control. This value is
ignored if the gsSubTypeWildcard bit is not set in the
corresponding value of t11FcSpPoCtDescrFlags."
REFERENCE
"- Fibre Channel - Generic Services-5 (FC-GS-5),
ANSI INCITS 427-2006, section 4.3.2.5."
::= { t11FcSpPoCtDescrEntry 5 }
--
--
-- Switches/Nodes in Active Switch Connectivity Objects
--
t11FcSpPoSwConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoSwConnEntry
De Santi, et al. Standards Track [Page 81]
RFC 5324 MIB for FC-SP September 2008
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of active Switch Connectivity Objects.
A Switch Connectivity Object defines to which other
Switches or Nodes a particular Switch may/may not be
connected at the Node level and/or at the Port level."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6.1, tables 123/124."
::= { t11FcSpPoActive 6 }
t11FcSpPoSwConnEntry OBJECT-TYPE
SYNTAX T11FcSpPoSwConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the name of either a Switch or a Node
with which any port of a particular Switch, or a particular
port of that Switch, is allowed or not allowed to be
connected.
The particular Switch is on the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoSwConnSwitchName, t11FcSpPoSwConnAllowedType,
t11FcSpPoSwConnPortNameOrAll,
t11FcSpPoSwConnAllowedIndex }
::= { t11FcSpPoSwConnTable 1 }
T11FcSpPoSwConnEntry ::= SEQUENCE {
t11FcSpPoSwConnSwitchName FcNameIdOrZero,
t11FcSpPoSwConnAllowedType INTEGER,
t11FcSpPoSwConnPortNameOrAll FcNameIdOrZero,
t11FcSpPoSwConnAllowedIndex Unsigned32,
t11FcSpPoSwConnAllowedNameType T11FcSpPolicyNameType,
t11FcSpPoSwConnAllowedName T11FcSpPolicyName
}
t11FcSpPoSwConnSwitchName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the particular Switch for which this Switch
De Santi, et al. Standards Track [Page 82]
RFC 5324 MIB for FC-SP September 2008
Connectivity Object specifies topology restrictions."
::= { t11FcSpPoSwConnEntry 1 }
t11FcSpPoSwConnAllowedType OBJECT-TYPE
SYNTAX INTEGER { switch(1), node(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies whether this row refers to
Switch-to-Switch or Switch-to-Node connectivity, i.e.,
whether the corresponding instance of
t11FcSpPoSwConnAllowedName specifies the name of a Switch
or the name of a Node."
::= { t11FcSpPoSwConnEntry 2 }
t11FcSpPoSwConnPortNameOrAll OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE(0 | 8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies either the particular port to which
this topology restriction applies, or if the value is the
zero-length string, that the topology restriction applies
to all ports on the particular Switch.
In the FC-SP Policy Database, restrictions for a particular
port are formatted within a Port Connectivity Entry of a
Switch Connectivity Object, whereas restrictions for all
ports on the Switch are specified in the main part of a
Switch Connectivity Object, i.e., not in a Port Connectivity
Entry."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6.1, tables 123/124."
::= { t11FcSpPoSwConnEntry 3 }
t11FcSpPoSwConnAllowedIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When multiple rows in this table apply to the same
port(s) in the same Switch's Switch Connectivity Object,
this object provides a unique index value to distinguish
between such rows."
::= { t11FcSpPoSwConnEntry 4 }
De Santi, et al. Standards Track [Page 83]
RFC 5324 MIB for FC-SP September 2008
t11FcSpPoSwConnAllowedNameType OBJECT-TYPE
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
restrictedNodeName(2),
portName(3),
restrictedPortName(4),
wildcard(5),
restrictedWildcard(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of this object is 'wildcard' or
'restrictedWildcard', this row specifies whether
connectivity is allowed/not allowed with entities not
explicitly named by other rows.
Otherwise, the combination of t11FcSpPoSwConnAllowedNameType
and t11FcSpPoSwConnAllowedName specify the name of:
- a Switch (if t11FcSpPoSwConnAllowedType = 'switch'), or
- a Node (if t11FcSpPoSwConnAllowedType = 'node')
to which connectivity is:
- allowed by 'nodeName' and 'portName',
- not allowed by 'restrictedNodeName' and
'restrictedPortName'."
::= { t11FcSpPoSwConnEntry 5 }
t11FcSpPoSwConnAllowedName OBJECT-TYPE
SYNTAX T11FcSpPolicyName (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of t11FcSpPoSwConnAllowedNameType is
'wildcard' or 'restrictedWildcard', this object has the
value '0000000000000000'h.
Otherwise, the combination of t11FcSpPoSwConnAllowedNameType
and t11FcSpPoSwConnAllowedName specify the name of:
- a Switch (if t11FcSpPoSwConnAllowedType = 'switch'), or
- a Node (if t11FcSpPoSwConnAllowedType = 'node')
to which connectivity is allowed/restricted."
::= { t11FcSpPoSwConnEntry 6 }
De Santi, et al. Standards Track [Page 84]
RFC 5324 MIB for FC-SP September 2008
--
-- IP Management Entries in Active IP Management List Objects
--
t11FcSpPoIpMgmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoIpMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of IP Management Entries in active IP Management
List Objects. An IP Management List Object is a
Fabric-wide Policy Object that describes which IP hosts
are allowed to manage a Fabric.
One IP Management List Object is represented by all
of the rows of this table that have the same values
of fcmInstanceIndex and t11FcSpPoFabricIndex."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7"
::= { t11FcSpPoActive 7 }
t11FcSpPoIpMgmtEntry OBJECT-TYPE
SYNTAX T11FcSpPoIpMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one IP Management
Entry within the active IP Management List Object for the
Fabric identified by t11FcSpPoFabricIndex and managed
within the Fibre Channel management instance identified
by fcmInstanceIndex.
The Policy Object Name of an IP Management Entry Policy
Object is either an IPv6 Address Range or an IPv4 Address
Range, where in each case, the range is specified as two
addresses: the low and high ends of the range. In
particular, since the Policy Object Name in this situation
can only be an IPv6 Address Range or an IPv4 Address Range,
it is represented here by three MIB objects defined as a
(InetAddressType, InetAddress, InetAddress) tuple, in which
the first address is the low end of the range, the second
address is the high end of the range, and both addresses are
of the type designated by InetAddressType.
In theory, the use of t11FcSpPoIpMgmtEntryNameLow and
t11FcSpPoIpMgmtEntryNameHigh (which both have the syntax
De Santi, et al. Standards Track [Page 85]
RFC 5324 MIB for FC-SP September 2008
of InetAddress) in the INDEX could cause the need for
excessively long OIDs. In practice, this can't happen
because FC-SP doesn't allow these objects to be specified
as DNS names."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoIpMgmtEntryNameType,
t11FcSpPoIpMgmtEntryNameLow,
t11FcSpPoIpMgmtEntryNameHigh }
::= { t11FcSpPoIpMgmtTable 1 }
T11FcSpPoIpMgmtEntry ::= SEQUENCE {
t11FcSpPoIpMgmtEntryNameType InetAddressType,
t11FcSpPoIpMgmtEntryNameLow InetAddress,
t11FcSpPoIpMgmtEntryNameHigh InetAddress,
t11FcSpPoIpMgmtWkpIndex Unsigned32,
t11FcSpPoIpMgmtAttribute T11FcSpAlphaNumNameOrAbsent
}
t11FcSpPoIpMgmtEntryNameType OBJECT-TYPE
SYNTAX InetAddressType
-- INTEGER { ipv4(1), ipv6(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The combination of t11FcSpPoIpMgmtNameType,
t11FcSpPoIpMgmtNameLow, and t11FcSpPoIpMgmtNameHigh
specify the Internet address range of this IP Management
Entry in the IP Management List Object.
The FC-SP specification does not allow the use of a
DNS domain name to specify the address at the lower end
or at the higher end of the Internet address range, nor does
it allow the specification of a zone index. Therefore, the
type of address must be one of: 'ipv4', or 'ipv6'."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
sections 7.1.7.1 & 7.1.2, tables 103/126."
::= { t11FcSpPoIpMgmtEntry 1 }
t11FcSpPoIpMgmtEntryNameLow OBJECT-TYPE
SYNTAX InetAddress (SIZE(4 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The lower end of an Internet address range. The type
of this address is given by the corresponding instance
of t11FcSpPoIpMgmtEntryNameType.
De Santi, et al. Standards Track [Page 86]
RFC 5324 MIB for FC-SP September 2008
The combination of t11FcSpPoIpMgmtNameType,
t11FcSpPoIpMgmtNameLow, and t11FcSpPoIpMgmtNameHigh
specify the Internet address range of this IP Management
Entry in the IP Management List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
sections 7.1.7.1 & 7.1.2, tables 103/126."
::= { t11FcSpPoIpMgmtEntry 2 }
t11FcSpPoIpMgmtEntryNameHigh OBJECT-TYPE
SYNTAX InetAddress (SIZE(4 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The higher end of an Internet address range. The type
of this address is given by the corresponding instance
of t11FcSpPoIpMgmtEntryNameType.
The combination of t11FcSpPoIpMgmtNameType,
t11FcSpPoIpMgmtNameLow, and t11FcSpPoIpMgmtNameHigh
specify the Internet address range of this IP Management
Entry in the IP Management List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 7.1.7.1 & 7.1.2, tables 103/126."
::= { t11FcSpPoIpMgmtEntry 3 }
t11FcSpPoIpMgmtWkpIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the restrictions for IP management
access by IP hosts in this range of IP addresses, specified
as the set of Well-Known Protocols Access Descriptors
contained in those rows of the t11FcSpPoWkpDescrTable for
which the value of t11FcSpPoWkpDescrSpecifierIndex is the
same as the value of this object. A value of zero indicates
that this IP Management Entry does not identify a Well-Known
Protocols Access Specifier."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and tables 127/129."
::= { t11FcSpPoIpMgmtEntry 4 }
De Santi, et al. Standards Track [Page 87]
RFC 5324 MIB for FC-SP September 2008
t11FcSpPoIpMgmtAttribute OBJECT-TYPE
SYNTAX T11FcSpAlphaNumNameOrAbsent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of an active Attribute Policy Object that is
defined for this IP Management entry or the zero-length
string. The zero-length string indicates that no Attribute
Policy Object is defined for this IP Management entry."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 128."
::= { t11FcSpPoIpMgmtEntry 5 }
--
-- Well-Known Protocol Access Descriptors
--
t11FcSpPoWkpDescrTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoWkpDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the Well-Known Protocol Access Descriptors
being used within active Policy Objects.
A Well-Known Protocol Access Specifier is a list of
Well-Known Protocol Access Descriptors each of which
specifies a protocol number, a port number, and/or various
flags specifying how IP management access is restricted.
A Well-Known Protocol Transport Access Specifier is
represented by all rows of this table that have the
same values of fcmInstanceIndex, t11FcSpPoFabricIndex,
and t11FcSpPoWkpDescrSpecifierIndex."
::= { t11FcSpPoActive 8 }
t11FcSpPoWkpDescrEntry OBJECT-TYPE
SYNTAX T11FcSpPoWkpDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Well-Known
Protocol Access Descriptor of a Well-Known Protocol
Access Specifier used within the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex."
De Santi, et al. Standards Track [Page 88]
RFC 5324 MIB for FC-SP September 2008
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoWkpDescrSpecifierIndex, t11FcSpPoWkpDescrIndex }
::= { t11FcSpPoWkpDescrTable 1 }
T11FcSpPoWkpDescrEntry ::= SEQUENCE {
t11FcSpPoWkpDescrSpecifierIndex Unsigned32,
t11FcSpPoWkpDescrIndex Unsigned32,
t11FcSpPoWkpDescrFlags BITS,
t11FcSpPoWkpDescrWkpNumber Unsigned32,
t11FcSpPoWkpDescrDestPort InetPortNumber
}
t11FcSpPoWkpDescrSpecifierIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Well-Known Protocol Access Specifier within a Fabric."
::= { t11FcSpPoWkpDescrEntry 1 }
t11FcSpPoWkpDescrIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Well-Known Protocol Access Descriptor within a Well-Known
Protocol Access Specifier."
::= { t11FcSpPoWkpDescrEntry 2 }
t11FcSpPoWkpDescrFlags OBJECT-TYPE
SYNTAX BITS {
allow(0),
wkpWildcard(1),
destPortWildcard(2),
readOnly(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag bits that specify how access is to be limited by
this Well-Known Protocol Access Descriptor:
- allow -- IP management access using this protocol/port
is allowed if this bit is set, and to be denied if this
bit is not set.
De Santi, et al. Standards Track [Page 89]
RFC 5324 MIB for FC-SP September 2008
- wkpWildcard -- if this bit is set, the IP Protocol number
of the Well-Known Protocol to be allowed/denied is
specified by the value of t11FcSpPoWkpDescrWkpNumber.
- destPortWildcard -- if this bit is set, the Destination
(TCP/UDP) Port number of the Well-Known Protocol to be
allowed/denied is specified by the value of
t11FcSpPoWkpDescrDestPort.
- readOnly -- if this bit is set, then access is to be
granted only for reading."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 131."
::= { t11FcSpPoWkpDescrEntry 3 }
t11FcSpPoWkpDescrWkpNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the 'wkpWildcard' bit is set in the corresponding
instance of t11FcSpPoWkpDescrFlags, this object specifies
the IP protocol number of the Well-Known Protocol."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 131.
- http://www.iana.org/assignments/protocol-numbers."
::= { t11FcSpPoWkpDescrEntry 4 }
t11FcSpPoWkpDescrDestPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the 'destPortWildcard' bit is set in the corresponding
instance of t11FcSpPoWkpDescrFlags, this object specifies
the Destination (TCP/UDP) Port number of the Well-Known
Protocol. When the 'destPortWildcard' bit is reset, this
object is ignored (and can have the value zero)."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 131.
- http://www.iana.org/assignments/port-numbers."
::= { t11FcSpPoWkpDescrEntry 5 }
De Santi, et al. Standards Track [Page 90]
RFC 5324 MIB for FC-SP September 2008
--
-- Attribute Entries in Active Attribute Policy Objects
--
t11FcSpPoAttribTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoAttribEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the Attribute Policy Objects being used within
active Policy Objects. In the FC-SP Policy Database, each
Attribute Policy Object consists of an Attribute Object Name
and a set of Attribute Entries.
An active Attribute Policy Object is represented by all the
Attribute Entries in this table that have the same value
of t11FcSpPoAttribName."
::= { t11FcSpPoActive 9 }
t11FcSpPoAttribEntry OBJECT-TYPE
SYNTAX T11FcSpPoAttribEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains information specific to an Attribute
Entry contained within an Attribute Policy Object that is
active within the Fabric identified by t11FcSpPoFabricIndex
and managed within the Fibre Channel management instance
identified by fcmInstanceIndex.
For some types of Attribute Policy Objects, it is valuable
to break out some semantically significant parts of the
Policy Object's value into their own individual MIB
objects; for example, to extract the one or more individual
Authentication Protocol Identifiers and associated
Authentication Protocol Parameters out of an Attribute
Object containing a 'AUTH_Negotiate Message Payload'.
For such types, another MIB table is defined to hold the
extracted values in MIB objects specific to the Attribute
Policy Object's type. In such cases, the
t11FcSpPoAttribExtension object in this table points to the
other MIB table.
If the value of one Attribute Entry is too large (more than
256 bytes) to be contained within the value of one instance
of t11FcSpPoAttribValue, then one row in this table contains
the first 256 bytes, and one (or more) other row(s) in this
table contain the rest of the value."
De Santi, et al. Standards Track [Page 91]
RFC 5324 MIB for FC-SP September 2008
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoAttribName, t11FcSpPoAttribEntryIndex,
t11FcSpPoAttribPartIndex }
::= { t11FcSpPoAttribTable 1 }
T11FcSpPoAttribEntry ::= SEQUENCE {
t11FcSpPoAttribName T11FcSpAlphaNumName,
t11FcSpPoAttribEntryIndex Unsigned32,
t11FcSpPoAttribPartIndex Unsigned32,
t11FcSpPoAttribType Unsigned32,
t11FcSpPoAttribValue OCTET STRING,
t11FcSpPoAttribExtension OBJECT IDENTIFIER
}
t11FcSpPoAttribName OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the Attribute Policy Object containing one
or more Attribute Entries."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.8.1 and table 133."
::= { t11FcSpPoAttribEntry 1 }
t11FcSpPoAttribEntryIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value to distinguish this Attribute Entry
from other Attribute Entries contained in the same
Attribute Policy Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.8.1, tables 133/134."
::= { t11FcSpPoAttribEntry 2 }
t11FcSpPoAttribPartIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the value of an Attribute Entry is shorter than 257
bytes, the whole value is contained in one instance of
De Santi, et al. Standards Track [Page 92]
RFC 5324 MIB for FC-SP September 2008
t11FcSpPoAttribValue, and the value of this object is 1.
If the value of an Attribute Entry is longer than 256 bytes,
then that value is divided up on 256-byte boundaries such
that all parts are 256 bytes long except the last part, which
is shorter if necessary, with each such part contained in
a separate row of this table, and the value of this object
is set to the part number. That is, this object has the
value of 1 for bytes 0-255, the value of 2 for bytes
256-511, etc."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.8.1, tables 134/135."
::= { t11FcSpPoAttribEntry 3 }
t11FcSpPoAttribType OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of attribute. The first type to be defined is:
t11FcSpPoAttribType t11FcSpPoAttribValue
=================== ====================
'00000001'h The AUTH_Negotiate Message Payload
"
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
section 7.1.8.1, tables 134/135 and table 10."
::= { t11FcSpPoAttribEntry 4 }
t11FcSpPoAttribValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of an Attribute Entry is divided up on 256-byte
boundaries such that all parts are 256 bytes long except the
last part, which is shorter if necessary, and each such part
is contained in a separate instance of this object.
The value of this object is independent of whether some
parts of its value are broken out into separate MIB objects
pointed to by the corresponding instance of
t11FcSpPoAttribExtension."
REFERENCE
De Santi, et al. Standards Track [Page 93]
RFC 5324 MIB for FC-SP September 2008
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
section 7.1.8.1, tables 134/135 and table 10."
::= { t11FcSpPoAttribEntry 5 }
t11FcSpPoAttribExtension OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For some types of Attribute Policy Object, the value of
this MIB object points to type-specific MIB objects that
contain individual/broken-out parts of the Attribute Policy
Object's value. If this object doesn't point to such
type-specific MIB objects, then it contains the value:
zeroDotZero.
In particular, when the value of t11FcSpPoAttribType
indicates 'AUTH_Negotiate Message Payload', one or more
Authentication Protocol Identifiers and their associated
Authentication Protocol Parameters are embedded within the
value of the corresponding instance of t11FcSpPoAttribValue;
MIB objects to contain these individual values are defined
in the t11FcSpPoAuthProtTable. Thus, for an 'AUTH_Negotiate
Message Payload' Attribute, the value of this object
contains an OID within the t11FcSpPoAuthProtTable, e.g.,
of the whole table, of an individual row, or of an individual
instance within the table."
::= { t11FcSpPoAttribEntry 6 }
--
-- Auth. Protocol Parameters in Active Attribute Policy Objects
--
t11FcSpPoAuthProtTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoAuthProtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Authentication Protocol Identifier and
Authentication Protocol Parameters that are embedded in
Attribute Policy Objects being used within active Policy
Objects.
This table is used for Attribute Entries of Attribute Policy
Objects for which the value of t11FcSpPoAttribType indicates
'AUTH_Negotiate Message Payload' and the value of
t11FcSpPoAttribExtension contains the OID of this table."
De Santi, et al. Standards Track [Page 94]
RFC 5324 MIB for FC-SP September 2008
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
sections 5.3.2 & 7.1.8.1, tables 134/135 and tables
10/11."
::= { t11FcSpPoActive 10 }
t11FcSpPoAuthProtEntry OBJECT-TYPE
SYNTAX T11FcSpPoAuthProtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about an Authentication
Protocol that is extracted out of the Attribute Entry
(identified by t11FcSpPoAttribEntryIndex) of the Policy
Attribute Object (identified by t11FcSpPoAttribName), which
is active within the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex.
If the value of one Attribute Protocol Parameters string is
too large (more than 256 bytes) to be contained within the
value of one instance of t11FcSpPoAuthProtParams, then one
row in this table contains the first 256 bytes, and one (or
more) other row(s) in this table contain the rest of the
value."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoAttribName, t11FcSpPoAttribEntryIndex,
t11FcSpPoAuthProtIdentifier,
t11FcSpPoAuthProtPartIndex }
::= { t11FcSpPoAuthProtTable 1 }
T11FcSpPoAuthProtEntry ::= SEQUENCE {
t11FcSpPoAuthProtIdentifier Unsigned32,
t11FcSpPoAuthProtPartIndex Unsigned32,
t11FcSpPoAuthProtParams OCTET STRING
}
t11FcSpPoAuthProtIdentifier OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Authentication Protocol Identifier:
1 = DH-CHAP
2 = FCAP
3 = FCPAP
De Santi, et al. Standards Track [Page 95]
RFC 5324 MIB for FC-SP September 2008
4 = IKEv2
5 = IKEv2-AUTH
240 thru 255 = Vendor Specific Protocols
all other values are 'Reserved' (by T11)."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.3.2, table 11."
::= { t11FcSpPoAuthProtEntry 1 }
t11FcSpPoAuthProtPartIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the value of an Attribute Protocol Parameters string
is shorter than 257 bytes, the whole value is contained in
one instance of t11FcSpPoAuthProtParams, and the value of
this object is 1. (This includes the case when the Attribute
Protocol Parameters string is zero bytes in length.)
If the value of an Authentication Protocol Parameters string
is longer than 256 bytes, then that value is divided up on
256-byte boundaries such that all parts are 256 bytes long
except the last part, which is shorter if necessary, with
each such part contained in a separate row of this table,
and the value of this object is set to the part number.
That is, this object has the value of 1 for bytes 0-255,
the value of 2 for bytes 256-511, etc."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.3.2, table 10."
::= { t11FcSpPoAuthProtEntry 2 }
t11FcSpPoAuthProtParams OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of an Authentication Protocol Parameters string
is divided up on 256-byte boundaries such that all parts
are 256 bytes long except the last part, which is shorter
if necessary, and each such part is contained in a
separate instance of this object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
De Santi, et al. Standards Track [Page 96]
RFC 5324 MIB for FC-SP September 2008
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.3.2, table 10."
::= { t11FcSpPoAuthProtEntry 3 }
--
-- Part 2 - Activate/De-Activate Operations
--
--
-- Objects to Invoke Activate/De-Activate Operations
--
t11FcSpPoOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that allows Activate and Deactivate operations
to be invoked for FC-SP Policies on various Fabrics.
Activating a new policy configuration is a two-step
process:
1) create a single Policy Summary Object as a set of rows
in the t11FcSpPoNaSummaryTable specifying a set of
Policy Objects that describe the new configuration; and
2) activate that Policy Summary Object using the
t11FcSpPoOperActivate object defined in this table.
Deactivating the current policy configuration is a one-step
process: the current Policy Summary Object is deactivated
using the t11FcSpPoOperDeActivate object."
::= { t11FcSpPoOperations 1 }
t11FcSpPoOperEntry OBJECT-TYPE
SYNTAX T11FcSpPoOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry allows an Activate and/or Deactivate operation
to be invoked on a particular Fabric, which is managed as
part of the Fibre Channel management instance identified
by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex }
::= { t11FcSpPoOperTable 1 }
T11FcSpPoOperEntry ::= SEQUENCE {
t11FcSpPoOperActivate T11FcSpAlphaNumName,
De Santi, et al. Standards Track [Page 97]
RFC 5324 MIB for FC-SP September 2008
t11FcSpPoOperDeActivate T11FcSpAlphaNumName,
t11FcSpPoOperResult INTEGER,
t11FcSpPoOperFailCause SnmpAdminString
}
t11FcSpPoOperActivate OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing the name of a Policy Summary Object into this
object is a request to activate the policy configuration
described by the combination of all rows in
t11FcSpPoNaSummaryTable that have that name as their
value of t11FcSpPoNaSummaryName and are for the same
Fabric.
Before issuing such a request, the relevant rows in the
t11FcSpPoNaSummaryTable must exist and represent a complete
and consistent Policy Summary Object. If they do not, the
request will fail, with t11FcSpPoOperResult having the
'badSummaryObject' value.
When read, the value of this object is always the zero-
length string.
Writing to this object does not delete (or in any way
affect) any rows in the MIB tables for non-active
Policy Objects."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3.6.2"
::= { t11FcSpPoOperEntry 1 }
t11FcSpPoOperDeActivate OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing the current value of t11FcSpPoPolicySummaryObjName
into this object (for a particular Fabric) is a request
to deactivate that Fabric's current policy configuration.
Writing any other value into this object is an error
(e.g., 'wrongValue').
When read, the value of this object is always the zero-
length string."
De Santi, et al. Standards Track [Page 98]
RFC 5324 MIB for FC-SP September 2008
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3.6.3"
::= { t11FcSpPoOperEntry 2 }
t11FcSpPoOperResult OBJECT-TYPE
SYNTAX INTEGER {
activateSuccess(1),
badSummaryObject(2),
activateFailure(3),
deactivateSuccess(4),
deactivateFailure(5),
inProgress(6),
none(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the status/result of the last
activation/deactivation that was invoked via the
corresponding instance of t11FcSpPoOperActivate or
t11FcSpPoOperDeActivate.
When the value of this object is 'inProgress', the
values of the corresponding instances of
t11FcSpPoOperActivate and t11FcSpPoOperDeActivate
cannot be modified.
The value 'badSummaryObject' indicates an activation
request that did not name a complete and consistent
Policy Summary Object.
The value 'none' indicates activation/deactivation
has not been attempted since the last restart of
the management system."
::= { t11FcSpPoOperEntry 3 }
t11FcSpPoOperFailCause OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual message indicating the reason for the
most recent activation/deactivation failure, or the
zero-length string if no information is available
(e.g., because the corresponding instance of
t11FcSpPoOperResult has the value 'none').
De Santi, et al. Standards Track [Page 99]
RFC 5324 MIB for FC-SP September 2008
When the corresponding instance of
t11FcSpPoOperResult is either 'activateFailure'
or 'deactivateFailure', the value of this object
indicates the reason for that failure."
::= { t11FcSpPoOperEntry 4 }
--
-- Part 3 - Non-Active Policy Objects
--
--
-- Non-Active Policy Summary Objects Available for Activation
--
t11FcSpPoNaSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of non-active Policy Summary Objects available
to be activated.
The functionality of this table deviates slightly from FC-SP
in that FC-SP specifies that the only Policy Summary Object
is the Active one, i.e., FC-SP does not store non-active
Policy Summary Objects in the Policy Database. Instead,
FC-SP requires a new Policy Summary Object to be created
for, and embedded within, every Activate (APS) request.
Thus, the newly created Policy Summary Object outlasts the
APS request only as the new active Policy Summary Object and
only if the APS succeeds. In contrast, the Activate
operation provided by this MIB module consists of two steps:
1) create a non-active Policy Summary Object as a set of
entries in this table describing a new configuration;
2) activate a Policy Summary Object (stored as a set of
entries in this table) using t11FcSpPoOperActivate.
These two steps are only loosely connected, i.e., the result
of the first operation is a non-active Policy Summary Object
that is retained (in this table) even if it isn't
immediately activated. Even after an attempt to activate
it succeeds or fails, a non-active Policy Summary Object
is not deleted, but is retained and still available for
subsequent modification/re-use."
::= { t11FcSpPoNonActive 1 }
t11FcSpPoNaSummaryEntry OBJECT-TYPE
De Santi, et al. Standards Track [Page 100]
RFC 5324 MIB for FC-SP September 2008
SYNTAX T11FcSpPoNaSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one non-active
Policy Object within a non-active Policy Summary Object
defined for potential use on the Fabric identified by
t11FcSpPoFabricIndex, and managed within the Fibre Channel
management instance identified by fcmInstanceIndex.
A non-active Policy Summary Object is described by a set
of entries in this table that have the same value of
t11FcSpPoNaSummaryName.
As and when a Policy Summary Object is activated using the
t11FcSpPoOperActivate object, if the activation is
successful, existing rows (if any) in MIB tables for active
Policy Objects are deleted and replaced by the appropriate
new set of rows. Existing rows in this table and/or in
other tables for non-active Policy Objects are not
affected by the activate operation.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.3 and table 104."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaSummaryName, t11FcSpPoNaSummaryPolicyType,
t11FcSpPoNaSummaryPolicyIndex }
::= { t11FcSpPoNaSummaryTable 1 }
T11FcSpPoNaSummaryEntry ::= SEQUENCE {
t11FcSpPoNaSummaryName T11FcSpAlphaNumName,
t11FcSpPoNaSummaryPolicyType T11FcSpPolicyObjectType,
t11FcSpPoNaSummaryPolicyIndex Unsigned32,
t11FcSpPoNaSummaryPolicyNameType T11FcSpPolicyNameType,
t11FcSpPoNaSummaryPolicyName T11FcSpPolicyName,
t11FcSpPoNaSummaryHashStatus T11FcSpHashCalculationStatus,
t11FcSpPoNaSummaryHashFormat T11FcSpPolicyHashFormat,
t11FcSpPoNaSummaryHashValue T11FcSpPolicyHashValue,
t11FcSpPoNaSummaryRowStatus RowStatus
}
t11FcSpPoNaSummaryName OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
De Santi, et al. Standards Track [Page 101]
RFC 5324 MIB for FC-SP September 2008
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the non-active Policy Summary Object that
contains this Policy Object."
::= { t11FcSpPoNaSummaryEntry 1 }
t11FcSpPoNaSummaryPolicyType OBJECT-TYPE
SYNTAX T11FcSpPolicyObjectType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 'Identifier' (i.e., the type) of this Policy Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.3.1 and table 104."
::= { t11FcSpPoNaSummaryEntry 2 }
t11FcSpPoNaSummaryPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique integer value to distinguish this Policy Object
from any others that have the same type and that are
contained in the same Policy Summary Object."
::= { t11FcSpPoNaSummaryEntry 3 }
t11FcSpPoNaSummaryPolicyNameType OBJECT-TYPE
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
alphaNumericName(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The combination of t11FcSpPoNaSummaryPolicyNameType and
t11FcSpPoNaSummaryPolicyName specify the name of the
non-active Policy Object identified by this row.
The type of name must be 'nodeName' if the value of the
corresponding instance of t11FcSpPoNaSummaryPolicyType is
'switchConnectivity', or 'alphaNumericName' otherwise."
::= { t11FcSpPoNaSummaryEntry 4 }
t11FcSpPoNaSummaryPolicyName OBJECT-TYPE
SYNTAX T11FcSpPolicyName
De Santi, et al. Standards Track [Page 102]
RFC 5324 MIB for FC-SP September 2008
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The combination of t11FcSpPoNaSummaryPolicyNameType and
t11FcSpPoNaSummaryPolicyName specify the name of the
non-active Policy Object identified by this row."
::= { t11FcSpPoNaSummaryEntry 5 }
t11FcSpPoNaSummaryHashStatus OBJECT-TYPE
SYNTAX T11FcSpHashCalculationStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When read, the value of this object is either:
correct -- the corresponding instance of
t11FcSpPoNaSummaryHashValue contains
the correct value; or
stale -- the corresponding instance of
t11FcSpPoNaSummaryHashValue contains
a stale (possibly incorrect) value;
Writing a value of 'calculate' is a request to re-calculate
and update the value of the corresponding instance of
t11FcSpPoNaSummaryHashValue. Writing a value of 'correct'
or 'stale' to this object is an error (e.g., 'wrongValue')."
DEFVAL { stale }
::= { t11FcSpPoNaSummaryEntry 6 }
t11FcSpPoNaSummaryHashFormat OBJECT-TYPE
SYNTAX T11FcSpPolicyHashFormat
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The format of this Policy Object's hash value as
contained in the corresponding instance of the
t11FcSpPoNaSummaryHashValue object."
DEFVAL { '00000001'h }
::= { t11FcSpPoNaSummaryEntry 7 }
t11FcSpPoNaSummaryHashValue OBJECT-TYPE
SYNTAX T11FcSpPolicyHashValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hash value of this Policy Object, in the format
identified by the corresponding instance of the
t11FcSpPoNaSummaryHashFormat object."
De Santi, et al. Standards Track [Page 103]
RFC 5324 MIB for FC-SP September 2008
DEFVAL { "" }
::= { t11FcSpPoNaSummaryEntry 8 }
t11FcSpPoNaSummaryRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
Before a row in this table can have 'active' status,
a non-Active Policy Object must already be represented
in the table corresponding to the value of
t11FcSpPoNaSummaryPolicyType with the name given by the
combination of t11FcSpPoNaSummaryPolicyNameType and
t11FcSpPoNaSummaryPolicyName. If such a Policy Object gets
deleted from the relevant table, the row in this table must
also get deleted.
When a row has 'active' status, the only write-able MIB
objects in this table are t11FcSpPoNaSummaryHashStatus and
t11FcSpPoNaSummaryRowStatus."
::= { t11FcSpPoNaSummaryEntry 9 }
--
-- Non-Active Switch Membership List Objects
--
t11FcSpPoNaSwListTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaSwListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of non-active Switch Membership List Objects."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 108."
::= { t11FcSpPoNonActive 2 }
t11FcSpPoNaSwListEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaSwListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one non-active
Switch Membership List Object for the Fabric identified
by t11FcSpPoFabricIndex and managed within the Fibre
De Santi, et al. Standards Track [Page 104]
RFC 5324 MIB for FC-SP September 2008
Channel management instance identified by
fcmInstanceIndex.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaSwListName }
::= { t11FcSpPoNaSwListTable 1 }
T11FcSpPoNaSwListEntry ::= SEQUENCE {
t11FcSpPoNaSwListName T11FcSpAlphaNumName,
t11FcSpPoNaSwListFabricName FcNameIdOrZero,
t11FcSpPoNaSwListRowStatus RowStatus
}
t11FcSpPoNaSwListName OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the Switch Membership List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 108."
::= { t11FcSpPoNaSwListEntry 1 }
t11FcSpPoNaSwListFabricName OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administratively specified Fabric_Name. This value
is meaningful only when static Domain_IDs are used in a
Fabric. If Static Domain_IDs are not used, the Fabric_Name
is dynamically determined, in which case the value of this
object can be '0000000000000000'h or the zero-length
string."
REFERENCE
"- t11FamConfigDomainId, T11-FC-FABRIC-ADDR-MGR-MIB,
Fibre Channel Fabric Address Manager MIB, RFC 4439;
- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, table 108."
::= { t11FcSpPoNaSwListEntry 2 }
t11FcSpPoNaSwListRowStatus OBJECT-TYPE
De Santi, et al. Standards Track [Page 105]
RFC 5324 MIB for FC-SP September 2008
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time.
If a row in this table is deleted, any row in the
t11FcSpPoNaSwMembTable for the same Switch Membership
List Object will also get deleted."
::= { t11FcSpPoNaSwListEntry 3 }
--
-- Switch Entries in Non-Active Switch Membership List Objects
--
t11FcSpPoNaSwMembTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaSwMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Switch Entries in non-active Switch Membership
List Objects."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoNonActive 3 }
t11FcSpPoNaSwMembEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaSwMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Switch that
is listed in a Switch Entry of a non-active Switch Membership
List Object for the Fabric identified by t11FcSpPoFabricIndex
and managed within the Fibre Channel management instance
identified by fcmInstanceIndex.
A row cannot exist unless there is a row in
t11FcSpPoNaSwListTable for the given Switch Membership List
Object, i.e., the row in t11FcSpPoNaSwListTable for a
Switch Membership List Object must be created before (or
simultaneously with) a row in this table for a Switch
Entry in that Switch Membership List Object, and when a
row in t11FcSpPoNaSwListTable is deleted, all rows in this
table for Switch Entries in that Switch Membership List
De Santi, et al. Standards Track [Page 106]
RFC 5324 MIB for FC-SP September 2008
Object also get deleted.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaSwListName,
t11FcSpPoNaSwMembSwitchNameType,
t11FcSpPoNaSwMembSwitchName }
::= { t11FcSpPoNaSwMembTable 1 }
T11FcSpPoNaSwMembEntry ::= SEQUENCE {
t11FcSpPoNaSwMembSwitchNameType T11FcSpPolicyNameType,
t11FcSpPoNaSwMembSwitchName FcNameIdOrZero,
t11FcSpPoNaSwMembFlags BITS,
t11FcSpPoNaSwMembDomainID FcDomainIdOrZero,
t11FcSpPoNaSwMembPolicyDataRole INTEGER,
t11FcSpPoNaSwMembAuthBehaviour BITS,
t11FcSpPoNaSwMembAttribute T11FcSpAlphaNumNameOrAbsent,
t11FcSpPoNaSwMembRowStatus RowStatus
}
t11FcSpPoNaSwMembSwitchNameType OBJECT-TYPE
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
restrictedNodeName(2),
wildcard(5),
restrictedWildcard(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the value of this object is 'nodeName' or
'restrictedNodeName', then the combination of
this object and t11FcSpPoNaSwMembSwitchName specify the
Switch Name of this Switch Entry.
The membership is restricted or unrestricted based on the
name type. Restricted membership means that the Switch is
not allowed to be part of the Fabric unless allowed by a
specific Switch Connectivity Object. Unrestricted
membership means that the Switch is allowed to be part of
the Fabric unless disallowed by a specific Switch
Connectivity Object.
The values of 'wildcard' and 'restrictedWildcard' provide
the means to specify whether to allow/deny membership for
Switches not explicitly named in the Switch Membership
De Santi, et al. Standards Track [Page 107]
RFC 5324 MIB for FC-SP September 2008
List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoNaSwMembEntry 1 }
t11FcSpPoNaSwMembSwitchName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the value of t11FcSpPoSwMembSwitchNameType is
'wildcard' or 'restrictedWildcard', this object has the
value '0000000000000000'h.
Otherwise, the combination of
t11FcSpPoNaSwMembSwitchNameType and this object specify the
Switch Name of this Switch Entry."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoNaSwMembEntry 2 }
t11FcSpPoNaSwMembFlags OBJECT-TYPE
SYNTAX BITS {
staticDomainID(0),
insistentDomainID(1),
serialPortsAccess(2),
physicalPortsAccess(3),
managerRole(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configurable options in respect to the administration
of Policy Objects at this Switch:
'staticDomainID' - the Switch uses the 'Static
Domain_IDs behavior' (as defined in FC-SW-4) when this bit
is set. This bit should have the same setting for all
Switches in a Fabric's Switch Membership List Object, or
else the Fabric will partition. If this bit is set,
the 'insistentDomainID' bit must not be set.
'insistentDomainID' - if this bit is set, the Switch
uses the 'Insistent Domain_IDs behavior' (as defined in
De Santi, et al. Standards Track [Page 108]
RFC 5324 MIB for FC-SP September 2008
FC-SW-4), and the 'staticDomainID' bit must not be set.
'serialPortsAccess' - the Switch allows management
through serial ports when and only when this bit is set.
'physicalPortsAccess' - the Switch allows management
through the physical panel when and only when this bit
is set.
'managerRole' - the Switch is allowed to change
the Fabric Policy configuration (on receipt of any of the
EACA, ESFC, EUFC, ACA, SFC, or UFC SW_ILSs) if this bit is
set."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 112."
::= { t11FcSpPoNaSwMembEntry 3 }
t11FcSpPoNaSwMembDomainID OBJECT-TYPE
SYNTAX FcDomainIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Domain_ID to be used when either the 'staticDomainID'
bit or the 'insistentDomainID' bit is set in the
corresponding value of t11FcSpPoNaSwMembFlags."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and tables 111 and 112."
::= { t11FcSpPoNaSwMembEntry 4 }
t11FcSpPoNaSwMembPolicyDataRole OBJECT-TYPE
SYNTAX INTEGER {
client(1),
autonomous(2),
server(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The role of the Switch in terms of which Policy data
it retains/maintains:
'client' - the Switch operates as a Client Switch.
A Client Switch maintains its own Switch Connectivity
Object and all Fabric-wide List Objects. If FC-SP
De Santi, et al. Standards Track [Page 109]
RFC 5324 MIB for FC-SP September 2008
Zoning is used, a Client Switch maintains only the
subset of the Active Zone Set that it requires to
enforce the current Fabric Zoning configuration.
'autonomous' - the Switch operates as an Autonomous
Switch. An Autonomous Switch maintains its own Switch
Connectivity Object and all Fabric-wide List Objects.
This is the same as 'client' except that if FC-SP Zoning
is used, an Autonomous Switch maintains a complete copy
of the Fabric Zoning Database.
'server' - the Switch operates as a Server Switch.
A Server Switch maintains all Fabric-wide List Objects
and the Switch Connectivity Objects of each Switch in
the Fabric. If FC-SP Zoning is used, a Server Switch
maintains a complete copy of the Fabric Zoning Database."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 113."
::= { t11FcSpPoNaSwMembEntry 5 }
t11FcSpPoNaSwMembAuthBehaviour OBJECT-TYPE
SYNTAX BITS {
mustAuthenticate(0),
rejectIsFailure(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The authentication behaviour of the Switch:
'mustAuthenticate' - if this bit is set, all connections
between this Switch and neighbor Switches must be
authenticated.
'rejectIsFailure' - if this bit is set, the rejection of
an AUTH_Negotiate message must be considered as an
authentication failure by this Switch."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 114."
::= { t11FcSpPoNaSwMembEntry 6 }
t11FcSpPoNaSwMembAttribute OBJECT-TYPE
SYNTAX T11FcSpAlphaNumNameOrAbsent
MAX-ACCESS read-create
De Santi, et al. Standards Track [Page 110]
RFC 5324 MIB for FC-SP September 2008
STATUS current
DESCRIPTION
"The name of a non-active Attribute Policy Object that
is defined for this Switch. The zero-length string
indicates that no non-active Attribute Policy Object is
defined for this Switch.
The effect of having no rows in the t11FcSpPoNaAttribTable
for which the value of t11FcSpPoNaAttribName is the
same as the value of this object, is the same as
this object's value being the zero-length string."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoNaSwMembEntry 7 }
t11FcSpPoNaSwMembRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time.
A row cannot exist unless there is a row in the
t11FcSpPoNaSwListTable for the Switch Membership List
Object containing the Switch Entry for this Switch, i.e.,
the row in t11FcSpPoNaSwListTable for a Switch Membership
List Object must be created before (or simultaneously)
with a row in this table for a Switch Entry in that
Switch Membership List Object; and when a row in
t11FcSpPoNaSwListTable is deleted, any row in this
table for a Switch Entry in that Switch Membership
List Object also gets deleted."
::= { t11FcSpPoNaSwMembEntry 8 }
--
-- Node Entries in Non-Active Node Membership List Objects
--
t11FcSpPoNaNoMembTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaNoMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Node Entries in non-active Node Membership List
Objects.
De Santi, et al. Standards Track [Page 111]
RFC 5324 MIB for FC-SP September 2008
One Node Membership List Object is represented by all
the rows in this table that have the same value of
t11FcSpPoNaNoMembListName."
::= { t11FcSpPoNonActive 4 }
t11FcSpPoNaNoMembEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaNoMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Node Entry of
a non-active Node Membership List Object for the Fabric
identified by t11FcSpPoFabricIndex and managed within
the Fibre Channel management instance identified by
fcmInstanceIndex.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaNoMembListName,
t11FcSpPoNaNoMembNodeNameType,
t11FcSpPoNaNoMembNodeName }
::= { t11FcSpPoNaNoMembTable 1 }
T11FcSpPoNaNoMembEntry ::= SEQUENCE {
t11FcSpPoNaNoMembListName T11FcSpAlphaNumName,
t11FcSpPoNaNoMembNodeNameType T11FcSpPolicyNameType,
t11FcSpPoNaNoMembNodeName FcNameIdOrZero,
t11FcSpPoNaNoMembFlags BITS,
t11FcSpPoNaNoMembCtAccessIndex Unsigned32,
t11FcSpPoNaNoMembAttribute T11FcSpAlphaNumNameOrAbsent,
t11FcSpPoNaNoMembRowStatus RowStatus
}
t11FcSpPoNaNoMembListName OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the non-active Node Membership List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 116."
::= { t11FcSpPoNaNoMembEntry 1 }
t11FcSpPoNaNoMembNodeNameType OBJECT-TYPE
De Santi, et al. Standards Track [Page 112]
RFC 5324 MIB for FC-SP September 2008
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
restrictedNodeName(2),
portName(3),
restrictedPortName(4),
wildcard(5),
restrictedWildcard(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the value of this object is 'wildcard' or
'restrictedWildcard', this Node Entry applies to Nodes not
explicitly named in the Node Membership List Object.
Otherwise, the combination of this object and
t11FcSpPoNaNoMembNodeName specify the name of this Node Entry
in the active Node Membership List Object. A Node is
identified by its Node Name or by one or more of its Port
Names.
Restricted membership means that a Node is not allowed to be
connected to the Fabric unless allowed by a specific Switch
Connectivity Object. Unrestricted membership means that a
Node is allowed to be connected to the Fabric unless
disallowed by a specific Switch Connectivity Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 116."
::= { t11FcSpPoNaNoMembEntry 2 }
t11FcSpPoNaNoMembNodeName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the value of t11FcSpPoNaNoMembNodeNameType is
'wildcard' or 'restrictedWildcard', this object has the
value '0000000000000000'h.
Otherwise, the combination of t11FcSpPoNaNoMembNodeNameType
and this object specify the name of this Node Entry is the
active Node Membership List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 116."
De Santi, et al. Standards Track [Page 113]
RFC 5324 MIB for FC-SP September 2008
::= { t11FcSpPoNaNoMembEntry 3 }
t11FcSpPoNaNoMembFlags OBJECT-TYPE
SYNTAX BITS {
scsiEnclosureAccess(0),
authenticationRequired(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configurable options in respect to the administration
of Policy Objects at this Node:
'scsiEnclosureAccess' - the Node is allowed to
control any Switch through SCSI Enclosure Services if this
bit is set. If a Switch does not support SCSI Enclosure
Services, this bit is ignored.
'authenticationRequired' - the Node is required to
authenticate itself to any Switch to which it is connected
if and only if this bit is set."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 118."
::= { t11FcSpPoNaNoMembEntry 4 }
t11FcSpPoNaNoMembCtAccessIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of this object is zero, then access by this
Node to Generic Services is not limited by a Common
Transport Access Specifier.
Otherwise, the limits are specified by the set of Common
Transport Access Descriptors contained in those rows of
the t11FcSpPoNaCtDescrTable for which the value of
t11FcSpPoNaCtDescrSpecifierIndex is the same as the value
of this object. No such rows in t11FcSpPoNaCtDescrTable
have the same effect as this object's value being zero."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
section 7.1.4.1 and tables 118/119/120/121."
::= { t11FcSpPoNaNoMembEntry 5 }
De Santi, et al. Standards Track [Page 114]
RFC 5324 MIB for FC-SP September 2008
t11FcSpPoNaNoMembAttribute OBJECT-TYPE
SYNTAX T11FcSpAlphaNumNameOrAbsent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of a non-active Attribute Policy Object that
is defined for this Node. The zero-length string indicates
that no non-active Attribute Policy Object is defined for
this Node.
The effect of having no rows in the t11FcSpPoNaAttribTable
for which the value of t11FcSpPoNaAttribName is the
same as the value of this object, is the same as
this object's value being the zero-length string."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 116."
::= { t11FcSpPoNaNoMembEntry 6 }
t11FcSpPoNaNoMembRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpPoNaNoMembEntry 7 }
--
--
-- Non-Active Common Transport Access Descriptors
--
t11FcSpPoNaCtDescrTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaCtDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Common Transport Access Descriptors referenced
by non-active Policy Objects.
A Common Transport Access Specifier is a list of Common
Transport Access Descriptors that specify whether a Node
is allowed to access a Generic Service or Sub-Server.
A non-active Common Transport Access Specifier is
represented by all rows of this table that have the same
De Santi, et al. Standards Track [Page 115]
RFC 5324 MIB for FC-SP September 2008
values of fcmInstanceIndex, t11FcSpPoFabricIndex, and
t11FcSpPoNaCtDescrSpecifierIndex."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.5"
::= { t11FcSpPoNonActive 5 }
t11FcSpPoNaCtDescrEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaCtDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Common Transport
Access Descriptor of an non-active Common Transport Access
Specifier used within the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaCtDescrSpecifierIndex, t11FcSpPoNaCtDescrIndex }
::= { t11FcSpPoNaCtDescrTable 1 }
T11FcSpPoNaCtDescrEntry ::= SEQUENCE {
t11FcSpPoNaCtDescrSpecifierIndex Unsigned32,
t11FcSpPoNaCtDescrIndex Unsigned32,
t11FcSpPoNaCtDescrFlags BITS,
t11FcSpPoNaCtDescrGsType OCTET STRING,
t11FcSpPoNaCtDescrGsSubType OCTET STRING,
t11FcSpPoNaCtDescrRowStatus RowStatus
}
t11FcSpPoNaCtDescrSpecifierIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Common Transport Access Specifier within a Fabric."
::= { t11FcSpPoNaCtDescrEntry 1 }
t11FcSpPoNaCtDescrIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
De Santi, et al. Standards Track [Page 116]
RFC 5324 MIB for FC-SP September 2008
DESCRIPTION
"An index value that uniquely identifies a particular
Common Transport Access Descriptor within a Common Transport
Access Specifier."
::= { t11FcSpPoNaCtDescrEntry 2 }
t11FcSpPoNaCtDescrFlags OBJECT-TYPE
SYNTAX BITS {
allow(0),
gsTypeWildcard(1),
gsSubTypeWildcard(2),
readOnly(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag bits that specify how access is to be limited by
this Common Transport Access Descriptor:
- allow -- access to the specified Generic Service and
Server is allowed if this bit is set, and is to be denied
if this bit is not set.
- gsTypeWildcard -- if this bit is set, the Generic Service
to be allowed/denied is specified by the value of
t11FcSpPoNaCtDescrGsType, and the gsSubTypeWildcard bit
must not also be set.
- gsSubTypeWildcard -- if this bit is set, the Generic
Service to be allowed/denied is specified by the value of
t11FcSpPoNaCtDescrGsSubType, and the gsTypeWildcard bit
must not also be set.
- readOnly -- if this bit is set, then access is to be
granted only for reading."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
section 7.1.5.1, and tables 117, 118, and 120."
::= { t11FcSpPoNaCtDescrEntry 3 }
t11FcSpPoNaCtDescrGsType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The GS_Type of the Generic Service (e.g., the FC-GS-5
Management Service) that is subject to access control.
De Santi, et al. Standards Track [Page 117]
RFC 5324 MIB for FC-SP September 2008
This value is ignored if the gsTypeWildcard bit is not set
in the corresponding value of t11FcSpPoNaCtDescrFlags."
REFERENCE
"- ANSI INCITS 427-2006,
Fibre Channel - Generic Services-5 (FC-GS-5),
section 4.3.2.4.
- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.5.1 and table 120."
::= { t11FcSpPoNaCtDescrEntry 4 }
t11FcSpPoNaCtDescrGsSubType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The GS_Subtype of the Generic Server (e.g., the Fabric Zone
Server) that is subject to access control. This value is
ignored if the gsSubTypeWildcard bit is not set in the
corresponding value of t11FcSpPoNaCtDescrFlags."
REFERENCE
"- ANSI INCITS 427-2006,
Fibre Channel - Generic Services-5 (FC-GS-5),
section 4.3.2.5.
- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.5.1 and table 120."
::= { t11FcSpPoNaCtDescrEntry 5 }
t11FcSpPoNaCtDescrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpPoNaCtDescrEntry 6 }
--
-- Switches/Nodes in Non-Active Switch Connectivity Objects
--
t11FcSpPoNaSwConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaSwConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of non-active Switch Connectivity Objects.
De Santi, et al. Standards Track [Page 118]
RFC 5324 MIB for FC-SP September 2008
A Switch Connectivity Object defines to which other
Switches or Nodes a particular Switch may/may not be
connected at the Node level and/or at the Port level."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6."
::= { t11FcSpPoNonActive 6 }
t11FcSpPoNaSwConnEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaSwConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the name of a Switch/Node with which
any port of a particular Switch on a particular Fabric, or
a particular port on that Switch, is allowed or not allowed
to be connected.
The particular Fabric is identified by t11FcSpPoFabricIndex
and managed within the Fibre Channel management instance
identified by fcmInstanceIndex.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaSwConnSwitchName,
t11FcSpPoNaSwConnAllowedType,
t11FcSpPoNaSwConnPortNameOrAll,
t11FcSpPoNaSwConnAllowedIndex }
::= { t11FcSpPoNaSwConnTable 1 }
T11FcSpPoNaSwConnEntry ::= SEQUENCE {
t11FcSpPoNaSwConnSwitchName FcNameIdOrZero,
t11FcSpPoNaSwConnAllowedType INTEGER,
t11FcSpPoNaSwConnPortNameOrAll FcNameIdOrZero,
t11FcSpPoNaSwConnAllowedIndex Unsigned32,
t11FcSpPoNaSwConnAllowedNameType T11FcSpPolicyNameType,
t11FcSpPoNaSwConnAllowedName FcNameIdOrZero,
t11FcSpPoNaSwConnRowStatus RowStatus
}
t11FcSpPoNaSwConnSwitchName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
De Santi, et al. Standards Track [Page 119]
RFC 5324 MIB for FC-SP September 2008
"The name of the Switch for which this Switch Connectivity
Object specifies topology restrictions."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6.1 and table 123."
::= { t11FcSpPoNaSwConnEntry 1 }
t11FcSpPoNaSwConnAllowedType OBJECT-TYPE
SYNTAX INTEGER { switch(1), node(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies whether this row refers to an
'Allowed Switch' that concerns Switch-to-Switch
connectivity or an 'Allowed Node' that concerns
Switch-to-Node connectivity. Consequently, this object's
value indicates whether the corresponding instance of
t11FcSpPoNaSwConnAllowedName specifies the name of a Switch
or the name of a Node."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6.1 and table 123."
::= { t11FcSpPoNaSwConnEntry 2 }
t11FcSpPoNaSwConnPortNameOrAll OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE(0 | 8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies either the particular port on which
this topology restriction applies, or if the value is the
zero-length string, that the topology restriction applies
to all ports of the Switch.
In other words, if this object's value contains the name of
a port, then this row represents a 'Port Connectivity Entry'
(as described in FC-SP) within a Switch Connectivity Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6.1 and tables 123/124."
::= { t11FcSpPoNaSwConnEntry 3 }
t11FcSpPoNaSwConnAllowedIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
De Santi, et al. Standards Track [Page 120]
RFC 5324 MIB for FC-SP September 2008
STATUS current
DESCRIPTION
"When multiple rows in this table refer to different
'Allowed Switches' or to different 'Allowed Nodes' for the
same port(s) in the same Switch Connectivity Object, this
object provides a unique index value to distinguish between
such rows."
::= { t11FcSpPoNaSwConnEntry 4 }
t11FcSpPoNaSwConnAllowedNameType OBJECT-TYPE
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
restrictedNodeName(2),
portName(3),
restrictedPortName(4),
wildcard(5),
restrictedWildcard(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of this object is 'wildcard' or
'restrictedWildcard', this row specifies whether
connectivity is allowed/not allowed with entities not
explicitly named by other rows.
Otherwise, the combination of
t11FcSpPoNaSwConnAllowedNameType and
t11FcSpPoNaSwConnAllowedName specify the name of:
- a Switch (if t11FcSpPoNaSwConnAllowedType = 'switch'), or
- a Node (if t11FcSpPoNaSwConnAllowedType = 'node')
to which connectivity is allowed/not allowed."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6.1 and tables 123/124."
::= { t11FcSpPoNaSwConnEntry 5 }
t11FcSpPoNaSwConnAllowedName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If t11FcSpPoNaSwConnAllowedNameType has the value
'wildcard' or 'restrictedWildcard', this object has the
value '0000000000000000'h.
De Santi, et al. Standards Track [Page 121]
RFC 5324 MIB for FC-SP September 2008
Otherwise, the combination of
t11FcSpPoNaSwConnAllowedNameType and
t11FcSpPoNaSwConnAllowedName specify the name of:
- a Switch (if t11FcSpPoNaSwConnAllowedType = 'switch'), or
- a Node (if t11FcSpPoNaSwConnAllowedType = 'node')
to which connectivity is allowed/not allowed."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6.1 and tables 123/124."
::= { t11FcSpPoNaSwConnEntry 6 }
t11FcSpPoNaSwConnRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpPoNaSwConnEntry 7 }
--
-- IP Management Entries in Non-Active IP Management List Objects
--
t11FcSpPoNaIpMgmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaIpMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of IP Management Entries in non-active IP
Management List Objects. The IP Management List Object is a
Fabric-wide Policy Object that describes which IP hosts are
allowed to manage a Fabric.
One non-active IP Management List Object is represented by
all rows of this table that have the same values of
fcmInstanceIndex and t11FcSpPoFabricIndex."
::= { t11FcSpPoNonActive 7 }
t11FcSpPoNaIpMgmtEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaIpMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one IP Management
De Santi, et al. Standards Track [Page 122]
RFC 5324 MIB for FC-SP September 2008
entry within a non-active IP Management List Object for the
Fabric identified by t11FcSpPoFabricIndex and managed
within the Fibre Channel management instance identified
by fcmInstanceIndex.
The Policy Object Name of an IP Management Entry Policy
Object is either an IPv6 Address Range or an IPv4 Address
Range. In a Fabric's database of Policy Objects, every
Policy Object Name, including these Internet address ranges,
is represented as a (T11FcSpPolicyNameType,
T11FcSpPolicyName) tuple. In contrast, this MIB module
uses the conventional MIB syntax for IP addresses, and
therefore represents the Policy Object Name of an IP
Management Entry Policy Object as a (InetAddressType,
InetAddress, InetAddress) tuple.
In theory, the use of t11FcSpPoNaIpMgmtEntryNameLow and
t11FcSpPoNaIpMgmtEntryNameHigh, which have the syntax of
InetAddress, in the INDEX could cause the need for
excessively long OIDs. In practice, this can't happen
because FC-SP doesn't allow these objects to be specified
as DNS names.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaIpMgmtListName,
t11FcSpPoNaIpMgmtEntryNameType,
t11FcSpPoNaIpMgmtEntryNameLow,
t11FcSpPoNaIpMgmtEntryNameHigh }
::= { t11FcSpPoNaIpMgmtTable 1 }
T11FcSpPoNaIpMgmtEntry ::= SEQUENCE {
t11FcSpPoNaIpMgmtListName T11FcSpAlphaNumName,
t11FcSpPoNaIpMgmtEntryNameType InetAddressType,
t11FcSpPoNaIpMgmtEntryNameLow InetAddress,
t11FcSpPoNaIpMgmtEntryNameHigh InetAddress,
t11FcSpPoNaIpMgmtWkpIndex Unsigned32,
t11FcSpPoNaIpMgmtAttribute T11FcSpAlphaNumNameOrAbsent,
t11FcSpPoNaIpMgmtRowStatus RowStatus
}
t11FcSpPoNaIpMgmtListName OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
De Santi, et al. Standards Track [Page 123]
RFC 5324 MIB for FC-SP September 2008
"The name of a non-active Node Membership List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 125."
::= { t11FcSpPoNaIpMgmtEntry 1 }
t11FcSpPoNaIpMgmtEntryNameType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The combination of t11FcSpPoNaIpMgmtEntryNameType,
t11FcSpPoNaIpMgmtNameLow, and t11FcSpPoNaIpMgmtNameHigh
specify the Internet address range of this IP Management
Entry in the IP Management List Object.
The FC-SP specification does not allow this address to
be specified using a DNS domain name, nor does it allow
the specification of zone indexes. Therefore, the
type of address must be one of: 'ipv4' or 'ipv6'."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 7.1.7.1 and table 126."
::= { t11FcSpPoNaIpMgmtEntry 2 }
t11FcSpPoNaIpMgmtEntryNameLow OBJECT-TYPE
SYNTAX InetAddress (SIZE(4 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The lower end of an Internet address range. The type
of this address is given by the corresponding instance
of t11FcSpPoNaIpMgmtEntryNameType.
The combination of t11FcSpPoNaIpMgmtEntryNameType,
t11FcSpPoNaIpMgmtNameLow, and t11FcSpPoIpMgmtNameHigh
specify the Internet address range of this IP Management
Entry in the IP Management List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 7.1.7.1 and table 126."
::= { t11FcSpPoNaIpMgmtEntry 3 }
t11FcSpPoNaIpMgmtEntryNameHigh OBJECT-TYPE
SYNTAX InetAddress (SIZE(4 | 16))
De Santi, et al. Standards Track [Page 124]
RFC 5324 MIB for FC-SP September 2008
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The higher end of an Internet address range. The type
of this address is given by the corresponding instance
of t11FcSpPoNaIpMgmtEntryNameType.
The combination of t11FcSpPoNaIpMgmtEntryNameType,
t11FcSpPoNaIpMgmtNameLow, and t11FcSpPoNaIpMgmtNameHigh
specify the Internet address range of this IP Management
Entry in the IP Management List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 7.1.7.1 and table 126."
::= { t11FcSpPoNaIpMgmtEntry 4 }
t11FcSpPoNaIpMgmtWkpIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the restrictions for IP management
access by IP hosts in this range of IP addresses.
The restrictions are specified as the set of Well-Known
Protocols Access Descriptors contained in those rows of the
t11FcSpPoNaWkpDescrTable for which the value of
t11FcSpPoNaWkpDescrSpecifierIndx is the same as the value
of this object. If there are no such rows or if the value
of this object is zero, then this IP Management Entry does
not identify any Well-Known Protocols Access restrictions."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and tables 127/129."
::= { t11FcSpPoNaIpMgmtEntry 5 }
t11FcSpPoNaIpMgmtAttribute OBJECT-TYPE
SYNTAX T11FcSpAlphaNumNameOrAbsent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of a non-active Attribute Policy Object that
is defined for this IP Management entry. The zero-length
string indicates that no non-active Attribute Policy Object
is defined for it.
De Santi, et al. Standards Track [Page 125]
RFC 5324 MIB for FC-SP September 2008
The effect of having no rows in the t11FcSpPoNaAttribTable
for which the value of t11FcSpPoNaAttribName is the same
as the value of this object, is the same as this object's
value being the zero-length string."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 128."
::= { t11FcSpPoNaIpMgmtEntry 6 }
t11FcSpPoNaIpMgmtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpPoNaIpMgmtEntry 7 }
--
-- Non-Active Well-Known Protocol Access Descriptors
--
t11FcSpPoNaWkpDescrTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaWkpDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the Well-Known Protocol Access Descriptors
referenced from non-active Policy Objects.
A Well-Known Protocol Access Specifier is a list of
Well-Known Protocol Access Descriptors each of which
specifies a protocol number, a port number, and/or various
flags specifying how IP management access is restricted.
A non-active Well-Known Protocol Transport Access Specifier
is represented by all rows of this table that have the same
values of fcmInstanceIndex, t11FcSpPoFabricIndex, and
t11FcSpPoNaWkpDescrSpecifierIndx."
::= { t11FcSpPoNonActive 8 }
t11FcSpPoNaWkpDescrEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaWkpDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Well-Known
De Santi, et al. Standards Track [Page 126]
RFC 5324 MIB for FC-SP September 2008
Protocol Access Descriptor of a non-active Well-Known
Protocol Access Specifier used within the Fabric identified
by t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaWkpDescrSpecifierIndx,
t11FcSpPoNaWkpDescrIndex }
::= { t11FcSpPoNaWkpDescrTable 1 }
T11FcSpPoNaWkpDescrEntry ::= SEQUENCE {
t11FcSpPoNaWkpDescrSpecifierIndx Unsigned32,
t11FcSpPoNaWkpDescrIndex Unsigned32,
t11FcSpPoNaWkpDescrFlags BITS,
t11FcSpPoNaWkpDescrWkpNumber Unsigned32,
t11FcSpPoNaWkpDescrDestPort InetPortNumber,
t11FcSpPoNaWkpDescrRowStatus RowStatus
}
t11FcSpPoNaWkpDescrSpecifierIndx OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
non-active Well-Known Protocol Access Specifier within
a Fabric."
::= { t11FcSpPoNaWkpDescrEntry 1 }
t11FcSpPoNaWkpDescrIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Well-Known Protocol Access Descriptor within a
non-active Well-Known Protocol Access Specifier."
::= { t11FcSpPoNaWkpDescrEntry 2 }
t11FcSpPoNaWkpDescrFlags OBJECT-TYPE
SYNTAX BITS {
allow(0),
wkpWildcard(1),
destPortWildcard(2),
readOnly(3)
De Santi, et al. Standards Track [Page 127]
RFC 5324 MIB for FC-SP September 2008
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag bits that specify how access is to be limited by
this Well-Known Protocol Access Descriptor:
- allow -- IP management access using this protocol/port
is allowed if this bit is set, and to be denied if this
bit is not set.
- wkpWildcard -- if this bit is set, the IP Protocol number
of the Well-Known Protocol to be allowed/denied is
specified by the value of t11FcSpPoNaWkpDescrWkpNumber.
- destPortWildcard -- if this bit is set, the Destination
(TCP/UDP) Port number of the Well-Known Protocol to be
allowed/denied is specified by the value of
t11FcSpPoNaWkpDescrDestPort.
- readOnly -- if this bit is set, then access is to be
granted only for reading."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 131."
::= { t11FcSpPoNaWkpDescrEntry 3 }
t11FcSpPoNaWkpDescrWkpNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the 'wkpWildcard' bit is set in the corresponding
instance of t11FcSpPoNaWkpDescrFlags, this object specifies
the IP protocol number of the Well-Known Protocol."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 131.
- http://www.iana.org/assignments/protocol-numbers."
::= { t11FcSpPoNaWkpDescrEntry 4 }
t11FcSpPoNaWkpDescrDestPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
De Santi, et al. Standards Track [Page 128]
RFC 5324 MIB for FC-SP September 2008
"When the 'destPortWildcard' bit is set in the corresponding
instance of t11FcSpPoNaWkpDescrFlags, this object specifies
the Destination (TCP/UDP) Port number of the Well-Known
Protocol. When the 'destPortWildcard' bit is reset, this
object is ignored (and can have the value zero)."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 131.
- http://www.iana.org/assignments/port-numbers."
::= { t11FcSpPoNaWkpDescrEntry 5 }
t11FcSpPoNaWkpDescrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpPoNaWkpDescrEntry 6 }
--
-- Attribute Entries in Non-Active Attribute Policy Objects
--
t11FcSpPoNaAttribTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaAttribEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the Attribute Policy Objects being used within
non-active Policy Objects.
A non-active Attribute Policy Object is represented by all
the Attribute Entries in this table that have the same
value of t11FcSpPoNaAttribName."
::= { t11FcSpPoNonActive 9 }
t11FcSpPoNaAttribEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaAttribEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Attribute
Entry contained within an Attribute Policy Object
that is non-active within the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex.
De Santi, et al. Standards Track [Page 129]
RFC 5324 MIB for FC-SP September 2008
For some types of Attribute Policy Objects, it is valuable
to break out some semantically significant parts of the
Policy Object's value into their own individual MIB
objects; for example, to extract the one or more individual
Authentication Protocol Identifiers and associated
Authentication Protocol Parameters out of an Attribute
containing a 'AUTH_Negotiate Message Payload'. For such
types, another MIB table is defined to hold the extracted
values in MIB objects specific to the Attribute Policy
Object's type. In such cases, the
t11FcSpPoNaAttribExtension object in this table points to
the other MIB table.
If the value of one Attribute Entry is too large (more than
256 bytes) to be contained within the value of one instance
of t11FcSpPoNaAttribValue, then one row in this table
contains the first 256 bytes, and one (or more) other row(s)
in this table contain the rest of the value.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaAttribName, t11FcSpPoNaAttribEntryIndex,
t11FcSpPoNaAttribPartIndex }
::= { t11FcSpPoNaAttribTable 1 }
T11FcSpPoNaAttribEntry ::= SEQUENCE {
t11FcSpPoNaAttribName T11FcSpAlphaNumName,
t11FcSpPoNaAttribEntryIndex Unsigned32,
t11FcSpPoNaAttribPartIndex Unsigned32,
t11FcSpPoNaAttribType Unsigned32,
t11FcSpPoNaAttribValue OCTET STRING,
t11FcSpPoNaAttribExtension OBJECT IDENTIFIER,
t11FcSpPoNaAttribRowStatus RowStatus
}
t11FcSpPoNaAttribName OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the Attribute Policy Object containing one
or more Attribute Entries."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
De Santi, et al. Standards Track [Page 130]
RFC 5324 MIB for FC-SP September 2008
February 2007, section 7.1.8.1 and table 133."
::= { t11FcSpPoNaAttribEntry 1 }
t11FcSpPoNaAttribEntryIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value to distinguish this Attribute Entry
from other Attribute Entries contained in the same
Attribute Policy Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.8.1, tables 133/134."
::= { t11FcSpPoNaAttribEntry 2 }
t11FcSpPoNaAttribPartIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the value of an Attribute Entry is shorter than 257
bytes, the whole value is contained in one instance of
t11FcSpPoNaAttribValue, and the value of this object is 1.
If the value of an Attribute Entry is longer than 256 bytes,
then that value is divided up on 256-byte boundaries such
that all parts are 256 bytes long except the last part which
is shorter if necessary, with each such part contained in
a separate row of this table, and the value of this object
is set to the part number. That is, this object has the
value of 1 for bytes 0-255, the value of 2 for bytes
256-511, etc."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.8.1, tables 134/135."
::= { t11FcSpPoNaAttribEntry 3 }
t11FcSpPoNaAttribType OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of attribute. The first type to be defined is:
t11FcSpPoNaAttribType t11FcSpPoNaAttribValue
De Santi, et al. Standards Track [Page 131]
RFC 5324 MIB for FC-SP September 2008
===================== ======================
'00000001'h The AUTH_Negotiate Message Payload
"
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
section 7.1.8.1, tables 134/135 and table 10."
::= { t11FcSpPoNaAttribEntry 4 }
t11FcSpPoNaAttribValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of an Attribute Entry is divided up on 256-byte
boundaries such that all parts are 256 bytes long except the
last part, which is shorter if necessary, and each such part
is contained in a separate instance of this object.
When the value of the corresponding instance of
t11FcSpPoNaAttribExtension is not zeroDotZero, then the same
underlying management data has its value contained both in
this object and in the individual/broken-out parts pointed
to by t11FcSpPoNaAttribExtension. Thus, after any
modification of the underlying management data, e.g., after
a Set operation to the value of either MIB representation,
then that modification is reflected in the values of both
MIB representations."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
section 7.1.8.1, tables 134/135 and table 10."
::= { t11FcSpPoNaAttribEntry 5 }
t11FcSpPoNaAttribExtension OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For some types of Attribute Policy Object, the value of
this MIB object points to type-specific MIB objects that
contain individual/broken-out parts of the Attribute Policy
Object's value. If this object doesn't point to such
type-specific MIB objects, then it contains the value:
zeroDotZero.
In particular, when the value of t11FcSpPoNaAttribType
indicates 'AUTH_Negotiate Message Payload', one or more
De Santi, et al. Standards Track [Page 132]
RFC 5324 MIB for FC-SP September 2008
Authentication Protocol Identifiers and their associated
Authentication Protocol Parameters are embedded within
the value of the corresponding instance of
t11FcSpPoNaAttribValue; MIB objects to contain these
individual values are defined in the
t11FcSpPoAuthProtTable. Thus, for an 'AUTH_Negotiate
Message Payload' Attribute, the value of this object would
contain the OID of t11FcSpPoNaAuthProtTable.
When the value of this object is not zeroDotZero, then the
same underlying management data has its value contained in
both the individual/broken-out parts pointed to by this
object and in the corresponding instance of
t11FcSpPoNaAttribValue. Thus, after any modification of the
underlying management data, e.g., after a Set operation to
the value of either MIB representation, then that
modification is reflected in the values of both MIB
representations."
::= { t11FcSpPoNaAttribEntry 6 }
t11FcSpPoNaAttribRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpPoNaAttribEntry 7 }
--
-- Auth. Protocol Parameters in Non-Active Attribute Policy Objects
--
t11FcSpPoNaAuthProtTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaAuthProtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Authentication Protocol Identifier and
Authentication Protocol Parameters that are embedded in
Attribute Policy Objects being used within non-active
Policy Objects.
This table is used for Attribute Entries of Attribute Policy
Objects for which the value of t11FcSpPoNaAttribType
indicates 'AUTH_Negotiate Message Payload' and the value of
t11FcSpPoNaAttribExtension contains the OID of this table."
REFERENCE
De Santi, et al. Standards Track [Page 133]
RFC 5324 MIB for FC-SP September 2008
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 5.3.2 & 7.1.8.1,
tables 134/135 and tables 10/11."
::= { t11FcSpPoNonActive 10 }
t11FcSpPoNaAuthProtEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaAuthProtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains information about an Authentication
Protocol that is extracted out of the Attribute Entry
(identified by t11FcSpPoNaAttribEntryIndex) of the
non-active Policy Attribute Object (identified by
t11FcSpPoNaAttribName) for the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex.
If the value of one Attribute Protocol Parameters string is
too large (more than 256 bytes) to be contained within the
value of one instance of t11FcSpPoNaAuthProtParams, then
one row in this table contains the first 256 bytes, and
one (or more) other row(s) in this table contain the rest
of the value.
The same underlying management data that is represented in
rows of this table is also represented by the corresponding
instances of t11FcSpPoNaAttribValue. Thus, after any
modification of the underlying management data, e.g., after
a Set operation to the value of either MIB representation,
then that modification is reflected in the values of both
MIB representations."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaAttribName, t11FcSpPoNaAttribEntryIndex,
t11FcSpPoNaAuthProtIdentifier,
t11FcSpPoNaAuthProtPartIndex }
::= { t11FcSpPoNaAuthProtTable 1 }
T11FcSpPoNaAuthProtEntry ::= SEQUENCE {
t11FcSpPoNaAuthProtIdentifier Unsigned32,
t11FcSpPoNaAuthProtPartIndex Unsigned32,
t11FcSpPoNaAuthProtParams OCTET STRING,
t11FcSpPoNaAuthProtRowStatus RowStatus
}
t11FcSpPoNaAuthProtIdentifier OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
De Santi, et al. Standards Track [Page 134]
RFC 5324 MIB for FC-SP September 2008
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Authentication Protocol Identifier:
1 = DH-CHAP
3 = FCPAP
4 = IKEv2
5 = IKEv2-AUTH
240 thru 255 = Vendor Specific Protocols
all other values are 'Reserved' (by T11)."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.3.2, table 11."
::= { t11FcSpPoNaAuthProtEntry 1 }
t11FcSpPoNaAuthProtPartIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the value of an Attribute Protocol Parameters string
is shorter than 257 bytes, the whole value is contained in
one instance of t11FcSpPoNaAuthProtParams, and the value of
this object is 1. (This includes the case when the Attribute
Protocol Parameters string is zero bytes in length.)
If the value of an Authentication Protocol Parameters string
is longer than 256 bytes, then that value is divided up on
256-byte boundaries such that all parts are 256 bytes long
except the last part, which is shorter if necessary, with
each such part contained in a separate row of this table,
and the value of this object is set to the part number.
That is, this object has the value of 1 for bytes 0-255,
the value of 2 for bytes 256-511, etc."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.3.2, table 10."
::= { t11FcSpPoNaAuthProtEntry 2 }
t11FcSpPoNaAuthProtParams OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
De Santi, et al. Standards Track [Page 135]
RFC 5324 MIB for FC-SP September 2008
"The value of an Authentication Protocol Parameters string
is divided up on 256-byte boundaries such that all parts
are 256 bytes long except the last part, which is shorter
if necessary, and each such part is contained in a
separate instance of this object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.3.2, table 10."
::= { t11FcSpPoNaAuthProtEntry 3 }
t11FcSpPoNaAuthProtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpPoNaAuthProtEntry 4 }
--
-- Part 4 - Statistics
--
t11FcSpPoStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of statistics maintained by FC-SP Security
Policy Servers."
::= { t11FcSpPoStatistics 1 }
t11FcSpPoStatsEntry OBJECT-TYPE
SYNTAX T11FcSpPoStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of statistics for the FC-SP Security Policy Server on
the Fabric identified by the value of t11FcSpPoFabricIndex,
and managed within the Fibre Channel management instance
identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex }
::= { t11FcSpPoStatsTable 1 }
T11FcSpPoStatsEntry ::= SEQUENCE {
t11FcSpPoInRequests Counter32,
t11FcSpPoInAccepts Counter32,
De Santi, et al. Standards Track [Page 136]
RFC 5324 MIB for FC-SP September 2008
t11FcSpPoInRejects Counter32
}
t11FcSpPoInRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FC-SP Policy Management Requests
(e.g., GPS, APS, etc.) received by this FC-SP
Security Policy Server on this Fabric.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3."
::= { t11FcSpPoStatsEntry 1 }
t11FcSpPoInAccepts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that this FC-SP Security Policy Server
sent an Accept CT_IU on this Fabric in response to a
received FC-SP Policy Management Request (e.g., GPS, APS,
etc.).
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3."
::= { t11FcSpPoStatsEntry 2 }
t11FcSpPoInRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that this FC-SP Security Policy Server
sent a Reject CT_IU on this Fabric in response to a
received FC-SP Policy Management Request (e.g., GPS, APS,
etc.).
De Santi, et al. Standards Track [Page 137]
RFC 5324 MIB for FC-SP September 2008
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3."
::= { t11FcSpPoStatsEntry 3 }
--
-- Part 5 - Control Information & Notifications
--
--
-- Control Information
--
t11FcSpPoServerAddress OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The WWN of the FC-SP Security Policy Server that
received a request that is referenced in a
notification."
::= { t11FcSpPoControl 1 }
t11FcSpPoControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of control information, including the memory
realization of FC-SP Policy Databases, and concerning
the generation of notifications due to FC-SP
Policy-related events."
::= { t11FcSpPoControl 2 }
t11FcSpPoControlEntry OBJECT-TYPE
SYNTAX T11FcSpPoControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains control information specific to FC-SP
Policy and Policy-related events for the Fabric identified
by the value of t11FcSpPoFabricIndex, and managed within
the Fibre Channel management instance identified by
fcmInstanceIndex."
De Santi, et al. Standards Track [Page 138]
RFC 5324 MIB for FC-SP September 2008
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex }
::= { t11FcSpPoControlTable 1 }
T11FcSpPoControlEntry ::= SEQUENCE {
t11FcSpPoStorageType StorageType,
t11FcSpPoNotificationEnable TruthValue,
t11FcSpPoLastNotifyType INTEGER,
t11FcSpPoRequestSource FcNameIdOrZero,
t11FcSpPoReasonCode T11NsGs4RejectReasonCode,
t11FcSpPoCtCommandString OCTET STRING,
t11FcSpPoReasonCodeExp Unsigned32,
t11FcSpPoReasonVendorCode OCTET STRING
}
t11FcSpPoStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the memory realization of FC-SP
Policy Objects and related information for a particular
Fabric; specifically, for:
- rows created and/or modified for the particular
Fabric in these tables:
t11FcSpPoNaSummaryTable
t11FcSpPoNaSwListTable
t11FcSpPoNaSwMembTable
t11FcSpPoNaNoMembTable
t11FcSpPoNaCtDescrTable
t11FcSpPoNaSwConnTable
t11FcSpPoNaIpMgmtTable
t11FcSpPoNaWkpDescrTable
t11FcSpPoNaAttribTable
- the activate and deactivate actions invoked through
the t11FcSpPoOperActivate and t11FcSpPoOperDeActivate
objects for the particular Fabric; and
- modified information contained in the same row
as an instance of this object.
Even if an instance of this object has the value
'permanent(4)', none of the information defined in
this MIB module for the given Fabric needs to be
writable."
::= { t11FcSpPoControlEntry 1 }
De Santi, et al. Standards Track [Page 139]
RFC 5324 MIB for FC-SP September 2008
t11FcSpPoNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the following types of
notifications:
t11FcSpPoNotifyActivation,
t11FcSpPoNotifyActivateFail,
t11FcSpPoNotifyDeactivation and
t11FcSpPoNotifyDeactivateFail
should be generated for this Fabric."
::= { t11FcSpPoControlEntry 2 }
t11FcSpPoLastNotifyType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
activation(2),
activateFail(3),
deactivation(4),
deactivateFail(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of which of the following types of
notification is currently being/was most recently
generated for the Fabric:
'activation' -- t11FcSpPoNotifyActivation
'activateFail' -- t11FcSpPoNotifyActivateFail
'deactivation' -- t11FcSpPoNotifyDeactivation
'deactivateFail' -- t11FcSpPoNotifyDeactivateFail
The value 'none' indicates that none of these types of
notifications have been generated since the last restart
of the network management system, and therefore that the
corresponding instances of: t11FcSpPoRequestSource,
t11FcSpPoReasonCode, t11FcSpPoCtCommandString,
t11FcSpPoReasonCodeExp, and
t11FcSpPoReasonVendorCode are irrelevant."
::= { t11FcSpPoControlEntry 3 }
t11FcSpPoRequestSource OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
De Santi, et al. Standards Track [Page 140]
RFC 5324 MIB for FC-SP September 2008
STATUS current
DESCRIPTION
"The WWN of the source of the (Activate Policy Summary
or Deactivate Policy Summary) request for which the
current/most recent notification of the type indicated by
the corresponding instance of t11FcSpPoLastNotifyType
is being/was generated.
If no source is available, the value of this object is
the zero-length string."
DEFVAL { "" }
::= { t11FcSpPoControlEntry 4 }
t11FcSpPoReasonCode OBJECT-TYPE
SYNTAX T11NsGs4RejectReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason code associated with the failure that is
indicated when the value of the corresponding instance
of t11FcSpPoLastNotifyType is 'activateFail' or
'deactivateFail'.
For other values of t11FcSpPoLastNotifyType, the value
of this object is 'none(1)'."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3.6.2 & 7.3.6.3"
::= { t11FcSpPoControlEntry 5 }
t11FcSpPoCtCommandString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The binary content of the failed request that is
indicated when the value of the corresponding instance of
t11FcSpPoLastNotifyType is 'activateFail' or
'deactivateFail'. The content of the request is formatted
as an octet string (in network byte order) containing the
CT_IU, as described in Table 2 of [FC-GS-5] (including the
preamble).
For other values of t11FcSpPoLastNotifyType, or if the
CT_IU's content is unavailable, the value of this object
is the zero-length string.
De Santi, et al. Standards Track [Page 141]
RFC 5324 MIB for FC-SP September 2008
When the length of this object is 255 octets, it
contains the first 255 octets of the CT_IU (in
network-byte order)."
::= { t11FcSpPoControlEntry 6 }
t11FcSpPoReasonCodeExp OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason code explanation associated with the failure
that is indicated when the value of the corresponding
instance of t11FcSpPoLastNotifyType is 'activateFail' or
'deactivateFail'.
For other values of t11FcSpPoLastNotifyType, the value
of this object is zero."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3.6.2 & 7.3.6.3"
::= { t11FcSpPoControlEntry 7 }
t11FcSpPoReasonVendorCode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0 | 1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific reason code associated with the failure
that is indicated when the value of the corresponding
instance of t11FcSpPoLastNotifyType is 'activateFail' or
'deactivateFail'.
For other values of t11FcSpPoLastNotifyType, or if no
vendor-specific reason code is available, the value
of this object is the zero-length string."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3.6.2 & 7.3.6.3"
::= { t11FcSpPoControlEntry 8 }
--
-- Notification definitions
--
t11FcSpPoNotifyActivation NOTIFICATION-TYPE
OBJECTS { t11FcSpPoServerAddress,
De Santi, et al. Standards Track [Page 142]
RFC 5324 MIB for FC-SP September 2008
t11FcSpPoPolicySummaryObjName,
t11FcSpPoRequestSource }
STATUS current
DESCRIPTION
"This notification is generated whenever a Security
Policy Server (indicated by the value of
t11FcSpPoServerAddress) successfully completes the
execution of an Activate Policy Summary request.
The value of t11FcSpPoRequestSource indicates
the source of the APS request. The value of
t11FcSpPoPolicySummaryObjName indicates the name of
the activated Policy Summary Object."
::= { t11FcSpPoMIBNotifications 1 }
t11FcSpPoNotifyActivateFail NOTIFICATION-TYPE
OBJECTS { t11FcSpPoServerAddress,
t11FcSpPoRequestSource,
t11FcSpPoCtCommandString,
t11FcSpPoReasonCode,
t11FcSpPoReasonCodeExp,
t11FcSpPoReasonVendorCode }
STATUS current
DESCRIPTION
"This notification is generated whenever a Security Policy
Server (indicated by the value of t11FcSpPoServerAddress)
fails to complete the execution of an Activate Policy
Summary request.
The value of t11FcSpPoCtCommandString indicates the
rejected request, and the values of t11FcSpPoReasonCode,
t11FcSpPoReasonCodeExp, and t11FcSpPoReasonVendorCode
indicate the reason for the rejection. The value of
t11FcSpPoRequestSource indicates the source of the
request."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3.6.2."
::= { t11FcSpPoMIBNotifications 2 }
t11FcSpPoNotifyDeactivation NOTIFICATION-TYPE
OBJECTS { t11FcSpPoServerAddress,
t11FcSpPoRequestSource }
STATUS current
DESCRIPTION
"This notification is generated whenever a Security
Policy Server (indicated by the value of
t11FcSpPoServerAddress) successfully completes the
De Santi, et al. Standards Track [Page 143]
RFC 5324 MIB for FC-SP September 2008
execution of a Deactivate Policy Summary request.
The value of t11FcSpPoRequestSource indicates
the source of the DPS request."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3.6.3."
::= { t11FcSpPoMIBNotifications 3 }
t11FcSpPoNotifyDeactivateFail NOTIFICATION-TYPE
OBJECTS { t11FcSpPoServerAddress,
t11FcSpPoRequestSource,
t11FcSpPoCtCommandString,
t11FcSpPoReasonCode,
t11FcSpPoReasonCodeExp,
t11FcSpPoReasonVendorCode }
STATUS current
DESCRIPTION
"This notification is generated whenever a Security Policy
Server (indicated by the value of t11FcSpPoServerAddress)
fails to complete the execution of a Deactivate Policy
Summary request.
The value of t11FcSpPoCtCommandString indicates the
rejected request, and the values of t11FcSpPoReasonCode,
t11FcSpPoReasonCodeExp, and t11FcSpPoReasonVendorCode
indicate the reason for the rejection. The value of
t11FcSpPoRequestSource indicates the source of the
request."
::= { t11FcSpPoMIBNotifications 4 }
--
-- Conformance
--
t11FcSpPoMIBCompliances
OBJECT IDENTIFIER ::= { t11FcSpPoMIBConformance 1 }
t11FcSpPoMIBGroups OBJECT IDENTIFIER ::= { t11FcSpPoMIBConformance 2 }
t11FcSpPoMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that
support the Fabric Policies defined in FC-SP,"
MODULE -- this module
MANDATORY-GROUPS { t11FcSpPoActiveObjectsGroup }
De Santi, et al. Standards Track [Page 144]
RFC 5324 MIB for FC-SP September 2008
GROUP t11FcSpPoNonActiveObjectsGroup
DESCRIPTION
"These objects are mandatory for FC-SP Security Policy
Servers."
GROUP t11FcSpPoNotifyObjectsGroup
DESCRIPTION
"These objects are mandatory for FC-SP Security Policy
Servers."
GROUP t11FcSpPoNotificationGroup
DESCRIPTION
"These notifications are mandatory for FC-SP Security
Policy Servers."
GROUP t11FcSpPoOperationsObjectsGroup
DESCRIPTION
"These objects are mandatory only for FC-SP Security
Policy Servers that support the activation/deactivation
of policies via SNMP."
GROUP t11FcSpPoStatsObjectsGroup
DESCRIPTION
"These objects are optional."
-- Write access is not required for any objects in this MIB module:
OBJECT t11FcSpPoOperActivate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoOperDeActivate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNotificationEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSummaryPolicyNameType
De Santi, et al. Standards Track [Page 145]
RFC 5324 MIB for FC-SP September 2008
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSummaryPolicyName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSummaryHashStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSummaryRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwListFabricName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwListRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwMembFlags
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwMembDomainID
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwMembPolicyDataRole
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwMembAuthBehaviour
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
De Santi, et al. Standards Track [Page 146]
RFC 5324 MIB for FC-SP September 2008
OBJECT t11FcSpPoNaSwMembAttribute
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwMembRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaNoMembFlags
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaNoMembCtAccessIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaNoMembAttribute
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaNoMembRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaCtDescrFlags
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaCtDescrGsType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaCtDescrGsSubType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaCtDescrRowStatus
MIN-ACCESS read-only
DESCRIPTION
De Santi, et al. Standards Track [Page 147]
RFC 5324 MIB for FC-SP September 2008
"Write access is not required."
OBJECT t11FcSpPoNaSwConnAllowedNameType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwConnAllowedName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwConnRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaIpMgmtWkpIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaIpMgmtAttribute
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaIpMgmtRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaWkpDescrFlags
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaWkpDescrWkpNumber
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaWkpDescrDestPort
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaWkpDescrRowStatus
De Santi, et al. Standards Track [Page 148]
RFC 5324 MIB for FC-SP September 2008
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaAttribType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaAttribValue
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaAttribRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaAuthProtParams
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaAuthProtRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { t11FcSpPoMIBCompliances 1 }
-- Units of Conformance
t11FcSpPoActiveObjectsGroup OBJECT-GROUP
OBJECTS { t11FcSpPoPolicySummaryObjName,
t11FcSpPoAdminFabricName,
t11FcSpPoActivatedTimeStamp,
t11FcSpPoSummaryPolicyType,
t11FcSpPoSummaryHashFormat,
t11FcSpPoSummaryHashValue,
t11FcSpPoSwMembSwitchFlags,
t11FcSpPoSwMembDomainID,
t11FcSpPoSwMembPolicyDataRole,
t11FcSpPoSwMembAuthBehaviour,
t11FcSpPoSwMembAttribute,
t11FcSpPoNoMembFlags,
t11FcSpPoNoMembCtAccessIndex,
t11FcSpPoNoMembAttribute,
De Santi, et al. Standards Track [Page 149]
RFC 5324 MIB for FC-SP September 2008
t11FcSpPoCtDescrFlags,
t11FcSpPoCtDescrGsType,
t11FcSpPoCtDescrGsSubType,
t11FcSpPoSwConnAllowedNameType,
t11FcSpPoSwConnAllowedName,
t11FcSpPoIpMgmtWkpIndex,
t11FcSpPoIpMgmtAttribute,
t11FcSpPoWkpDescrFlags,
t11FcSpPoWkpDescrWkpNumber,
t11FcSpPoWkpDescrDestPort,
t11FcSpPoAttribType,
t11FcSpPoAttribValue,
t11FcSpPoAttribExtension,
t11FcSpPoAuthProtParams
}
STATUS current
DESCRIPTION
"A collection of MIB objects that contain information
about active Policy Objects that express Fibre Channel
Security (FC-SP) policy."
::= { t11FcSpPoMIBGroups 1 }
t11FcSpPoOperationsObjectsGroup OBJECT-GROUP
OBJECTS { t11FcSpPoOperActivate,
t11FcSpPoOperDeActivate,
t11FcSpPoOperResult,
t11FcSpPoOperFailCause
}
STATUS current
DESCRIPTION
"A collection of MIB objects that allow a new set of
Fibre Channel Security (FC-SP) policies to be activated
or an existing set to be deactivated."
::= { t11FcSpPoMIBGroups 2 }
t11FcSpPoNonActiveObjectsGroup OBJECT-GROUP
OBJECTS { t11FcSpPoStorageType,
t11FcSpPoNaSummaryPolicyNameType,
t11FcSpPoNaSummaryPolicyName,
t11FcSpPoNaSummaryHashStatus,
t11FcSpPoNaSummaryHashFormat,
t11FcSpPoNaSummaryHashValue,
t11FcSpPoNaSummaryRowStatus,
t11FcSpPoNaSwListFabricName,
t11FcSpPoNaSwListRowStatus,
t11FcSpPoNaSwMembFlags,
t11FcSpPoNaSwMembDomainID,
t11FcSpPoNaSwMembPolicyDataRole,
De Santi, et al. Standards Track [Page 150]
RFC 5324 MIB for FC-SP September 2008
t11FcSpPoNaSwMembAuthBehaviour,
t11FcSpPoNaSwMembAttribute,
t11FcSpPoNaSwMembRowStatus,
t11FcSpPoNaNoMembFlags,
t11FcSpPoNaNoMembCtAccessIndex,
t11FcSpPoNaNoMembAttribute,
t11FcSpPoNaNoMembRowStatus,
t11FcSpPoNaCtDescrFlags,
t11FcSpPoNaCtDescrGsType,
t11FcSpPoNaCtDescrGsSubType,
t11FcSpPoNaCtDescrRowStatus,
t11FcSpPoNaSwConnAllowedNameType,
t11FcSpPoNaSwConnAllowedName,
t11FcSpPoNaSwConnRowStatus,
t11FcSpPoNaIpMgmtWkpIndex,
t11FcSpPoNaIpMgmtAttribute,
t11FcSpPoNaIpMgmtRowStatus,
t11FcSpPoNaWkpDescrFlags,
t11FcSpPoNaWkpDescrWkpNumber,
t11FcSpPoNaWkpDescrDestPort,
t11FcSpPoNaWkpDescrRowStatus,
t11FcSpPoNaAttribType,
t11FcSpPoNaAttribValue,
t11FcSpPoNaAttribExtension,
t11FcSpPoNaAttribRowStatus,
t11FcSpPoNaAuthProtParams,
t11FcSpPoNaAuthProtRowStatus
}
STATUS current
DESCRIPTION
"A collection of MIB objects that contain information
about non-active Policy Objects available for activation
in order to change Fibre Channel Security (FC-SP) policy."
::= { t11FcSpPoMIBGroups 3 }
t11FcSpPoStatsObjectsGroup OBJECT-GROUP
OBJECTS { t11FcSpPoInRequests,
t11FcSpPoInAccepts,
t11FcSpPoInRejects
}
STATUS current
DESCRIPTION
"A collection of MIB objects that contain statistics
that can be maintained by FC-SP Security Policy Servers."
::= { t11FcSpPoMIBGroups 4 }
t11FcSpPoNotifyObjectsGroup OBJECT-GROUP
OBJECTS { t11FcSpPoNotificationEnable,
De Santi, et al. Standards Track [Page 151]
RFC 5324 MIB for FC-SP September 2008
t11FcSpPoServerAddress,
t11FcSpPoLastNotifyType,
t11FcSpPoRequestSource,
t11FcSpPoReasonCode,
t11FcSpPoCtCommandString,
t11FcSpPoReasonCodeExp,
t11FcSpPoReasonVendorCode
}
STATUS current
DESCRIPTION
"A collection of MIB objects to control the generation of
notifications concerning Fibre Channel Security (FC-SP)
policy, and to hold information contained in such
notifications."
::= { t11FcSpPoMIBGroups 5 }
t11FcSpPoNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { t11FcSpPoNotifyActivation,
t11FcSpPoNotifyActivateFail,
t11FcSpPoNotifyDeactivation,
t11FcSpPoNotifyDeactivateFail
}
STATUS current
DESCRIPTION
"A collection of notifications of events concerning
Fibre Channel Security (FC-SP) policy."
::= { t11FcSpPoMIBGroups 6 }
END
6.5. The T11-FC-SP-SA-MIB Module
--*******************************************************************
-- FC-SP Security Associations
--
T11-FC-SP-SA-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Unsigned32, Counter32, Counter64, TimeTicks, Gauge32,
mib-2 FROM SNMPv2-SMI -- [RFC2578]
RowStatus, StorageType, AutonomousType, TimeStamp,
TruthValue FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
InterfaceIndex,
De Santi, et al. Standards Track [Page 152]
RFC 5324 MIB for FC-SP September 2008
InterfaceIndexOrZero FROM IF-MIB -- [RFC2863]
fcmInstanceIndex,
FcAddressIdOrZero FROM FC-MGMT-MIB -- [RFC4044]
T11FabricIndex FROM T11-TC-MIB -- [RFC4439]
T11FcSpType,
T11FcSpiIndex,
T11FcSpLifetimeLeft,
T11FcSpLifetimeLeftUnits,
T11FcSpSecurityProtocolId,
T11FcRoutingControl,
T11FcSaDirection,
T11FcSpPrecedence,
T11FcSpTransforms FROM T11-FC-SP-TC-MIB;
t11FcSpSaMIB MODULE-IDENTITY
LAST-UPDATED "200808200000Z"
ORGANIZATION "This MIB module was developed through the
coordinated effort of two organizations:
T11 began the development and the IETF (in
the IMSS Working Group) finished it."
CONTACT-INFO
" Claudio DeSanti
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
EMail: cds@cisco.com
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
Email: kzm@cisco.com"
DESCRIPTION
"This MIB module specifies the management information
required to manage Security Associations established via
Fibre Channel's FC-SP specification.
The MIB module consists of six parts:
- a per-Fabric table, t11FcSpSaIfTable, of capabilities,
parameters, status information, and counters; the counters
include non-transient aggregates of per-SA transient
counters;
- three tables, t11FcSpSaPropTable, t11FcSpSaTSelPropTable,
and t11FcSpSaTransTable, specifying the proposals for an
FC-SP entity acting as an SA_Initiator to present to the
SA_Responder during the negotiation of Security
De Santi, et al. Standards Track [Page 153]
RFC 5324 MIB for FC-SP September 2008
Associations. The same information is also used by an
FC-SP entity acting as an SA_Responder to decide what to
accept during the negotiation of Security Associations.
One of these tables, t11FcSpSaTransTable, is used not only
for information about security transforms to propose and
to accept, but also as agreed upon during the negotiation
of Security Associations;
- a table, t11FcSpSaTSelDrByTable, of Traffic Selectors
having the security action of 'drop' or 'bypass' to be
applied either to ingress traffic that is unprotected by
FC-SP, or to all egress traffic;
- four tables, t11FcSpSaPairTable, t11FcSpSaTSelNegInTable,
t11FcSpSaTSelNegOutTable, and t11FcSpSaTSelSpiTable,
containing information about active bidirectional pairs of
Security Associations; in particular, t11FcSpSaPairTable
has one row per active bidirectional SA pair,
t11FcSpSaTSelNegInTable and t11FcSpSaTSelNegOutTable
contain information on the Traffic Selectors negotiated on
the SAs, and the t11FcSpSaTSelSpiTable is an alternate
lookup table such that the Traffic Selector(s) in use on a
particular Security Association can be quickly determined
based on the (ingress) SPI value;
- a table, t11FcSpSaControlTable, of control and other
information concerning the generation of notifications for
events related to FC-SP Security Associations;
- one notification, t11FcSpSaNotifyAuthFailure, generated on
the occurrence of an Authentication failure for a received
FC-2 or CT_IU frame.
Copyright (C) The IETF Trust (2008). This version
of this MIB module is part of RFC 5324; see the RFC
itself for full legal notices."
REVISION "200808200000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC 5324."
::= { mib-2 179 }
t11FcSpSaMIBNotifications OBJECT IDENTIFIER ::= { t11FcSpSaMIB 0 }
t11FcSpSaMIBObjects OBJECT IDENTIFIER ::= { t11FcSpSaMIB 1 }
t11FcSpSaMIBConformance OBJECT IDENTIFIER ::= { t11FcSpSaMIB 2 }
t11FcSpSaBase OBJECT IDENTIFIER ::= { t11FcSpSaMIBObjects 1 }
t11FcSpSaConfig OBJECT IDENTIFIER ::= { t11FcSpSaMIBObjects 2 }
t11FcSpSaActive OBJECT IDENTIFIER ::= { t11FcSpSaMIBObjects 3 }
t11FcSpSaControl OBJECT IDENTIFIER ::= { t11FcSpSaMIBObjects 4 }
De Santi, et al. Standards Track [Page 154]
RFC 5324 MIB for FC-SP September 2008
--
-- Base-level Per-Fabric Information
--
t11FcSpSaIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per-Fabric information related to
FC-SP Security Associations."
::= { t11FcSpSaBase 1 }
t11FcSpSaIfEntry OBJECT-TYPE
SYNTAX T11FcSpSaIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information related to Security
Associations on a particular Fabric, and managed as part
of the Fibre Channel management instance identified by
fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpSaIfIndex,
t11FcSpSaIfFabricIndex }
::= { t11FcSpSaIfTable 1 }
T11FcSpSaIfEntry ::= SEQUENCE {
t11FcSpSaIfIndex InterfaceIndexOrZero,
t11FcSpSaIfFabricIndex T11FabricIndex,
-- capabilities
t11FcSpSaIfEspHeaderCapab T11FcSpTransforms,
t11FcSpSaIfCTAuthCapab T11FcSpTransforms,
t11FcSpSaIfIKEv2Capab T11FcSpTransforms,
t11FcSpSaIfIkev2AuthCapab TruthValue,
-- parameters and status
t11FcSpSaIfStorageType StorageType,
t11FcSpSaIfReplayPrevention TruthValue,
t11FcSpSaIfReplayWindowSize Unsigned32,
t11FcSpSaIfDeadPeerDetections Counter32,
t11FcSpSaIfTerminateAllSas INTEGER,
-- summary frame counters
t11FcSpSaIfOutDrops Counter64,
t11FcSpSaIfOutBypasses Counter64,
t11FcSpSaIfOutProcesses Counter64,
t11FcSpSaIfOutUnMatcheds Counter64,
t11FcSpSaIfInUnprotUnmtchDrops Counter64,
-- aggregates of per-SA transient counters
t11FcSpSaIfInDetReplays Counter64,
De Santi, et al. Standards Track [Page 155]
RFC 5324 MIB for FC-SP September 2008
t11FcSpSaIfInUnprotMtchDrops Counter64,
t11FcSpSaIfInBadXforms Counter64,
t11FcSpSaIfInGoodXforms Counter64,
t11FcSpSaIfInProtUnmtchs Counter64
}
t11FcSpSaIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object has a non-zero value to identify a particular
interface, or the value zero to indicate that the
information in this row applies to all (of the management
instance's) interfaces to the particular Fabric.
If any row has a non-zero value of t11FcSpSaIfIndex, then
all rows for the same Fibre Channel management instance must
also have a non-zero value of t11FcSpSaIfIndex and thereby
be specific to a particular interface.
As and when zero values of t11FcSpSaIfIndex are used in
this table, then they must also be used in each other
table that has t11FcSpSaIfIndex in its INDEX clause."
::= { t11FcSpSaIfEntry 1 }
t11FcSpSaIfFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Fabric."
::= { t11FcSpSaIfEntry 2 }
t11FcSpSaIfEspHeaderCapab OBJECT-TYPE
SYNTAX T11FcSpTransforms
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A list of the standardized transforms supported by this
entity on this interface for ESP_Header protection."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Appendix A.3.1, tables A.23, A.25."
::= { t11FcSpSaIfEntry 3 }
De Santi, et al. Standards Track [Page 156]
RFC 5324 MIB for FC-SP September 2008
t11FcSpSaIfCTAuthCapab OBJECT-TYPE
SYNTAX T11FcSpTransforms
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A list of the standardized transforms supported by this
entity on this interface for CT_Authentication protection."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Appendix A.3.1, tables A.23, A.25."
::= { t11FcSpSaIfEntry 4 }
t11FcSpSaIfIKEv2Capab OBJECT-TYPE
SYNTAX T11FcSpTransforms
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A list of the standardized transforms supported by this
entity on this interface with IKEv2 protection."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Appendix A.3.1, tables A.23, A.24,
A.25, A.26."
::= { t11FcSpSaIfEntry 5 }
t11FcSpSaIfIkev2AuthCapab OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the entity is capable of
supporting the IKEv2-AUTH protocol on this interface, i.e.,
concatenation of Authentication and SA Management
Transactions, such that an SA Management Transaction is
used to perform both the authentication function and
SA management."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.7.2, and table A.27."
::= { t11FcSpSaIfEntry 6 }
t11FcSpSaIfStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-write
STATUS current
De Santi, et al. Standards Track [Page 157]
RFC 5324 MIB for FC-SP September 2008
DESCRIPTION
"This object specifies the memory realization of
information related to FC-SP Security Associations
for interface(s) to a particular Fabric; specifically,
for rows created and/or modified in these tables:
t11FcSpSaPropTable
t11FcSpSaTSelDrByTable
t11FcSpSaControlTable
and, for modified information contained in the same
row as an instance of this object.
Even if an instance of this object has the value
'permanent(4)', none of the information defined in
this MIB module for interface(s) to the given Fabric
need to be writable."
::= { t11FcSpSaIfEntry 7 }
t11FcSpSaIfReplayPrevention OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether anti-replay protection is
enabled for frame reception on this interface.
Note that the replay-protection mechanism in FC-SP is
conceptually similar to the corresponding mechanism in
IPsec ESP."
REFERENCE
"- IP Encapsulating Security Payload (ESP),
RFC 4303, December 2005, section 3.3.3."
::= { t11FcSpSaIfEntry 8 }
t11FcSpSaIfReplayWindowSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The size of the replay window to be used when
anti-replay protection is enabled for frame reception
on this interface.
Note that the replay-protection mechanism in FC-SP is
conceptually similar to the corresponding mechanism in
IPsec ESP."
REFERENCE
De Santi, et al. Standards Track [Page 158]
RFC 5324 MIB for FC-SP September 2008
"- IP Encapsulating Security Payload (ESP),
RFC 4303, December 2005, section 3.4.3."
::= { t11FcSpSaIfEntry 9 }
t11FcSpSaIfDeadPeerDetections OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a dead peer condition has been
detected on this interface.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 8.5.3.3."
::= { t11FcSpSaIfEntry 10 }
t11FcSpSaIfTerminateAllSas OBJECT-TYPE
SYNTAX INTEGER { noop(1), terminate(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'terminate' is a request to
terminate all outstanding Security Associations on this
interface.
When read, the value of this object is always 'noop'.
Setting this object to 'noop' has no effect."
::= { t11FcSpSaIfEntry 11 }
t11FcSpSaIfOutDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of output frames that were dropped, instead
of being transmitted on this interface, because they matched
an active (at that time) Traffic Selector with an action of
'Drop'.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 12 }
t11FcSpSaIfOutBypasses OBJECT-TYPE
De Santi, et al. Standards Track [Page 159]
RFC 5324 MIB for FC-SP September 2008
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of output frames that were transmitted
unchanged by FC-SP on this interface because they matched
an active (at that time) Traffic Selector with an action
of 'Bypass'.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 13 }
t11FcSpSaIfOutProcesses OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of output frames that were protected by FC-SP
before being transmitted on this interface because they
matched an active (at that time) Traffic Selector with an
action of 'Process'.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 14 }
t11FcSpSaIfOutUnMatcheds OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were transmitted unchanged by
FC-SP on this interface because they did not match any
Traffic Selector active at that time.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 15 }
t11FcSpSaIfInUnprotUnmtchDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received on this interface that
were dropped because they were unprotected and did not
match any Traffic Selector active at that time.
De Santi, et al. Standards Track [Page 160]
RFC 5324 MIB for FC-SP September 2008
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 16 }
t11FcSpSaIfInDetReplays OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a replay has been detected on
a Security Association that is currently active or was
previously active on this interface. Note that a frame
that is discarded because it is 'behind' the window,
i.e., too old, is counted as a replay.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 17 }
t11FcSpSaIfInUnprotMtchDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a frame received on this
interface was dropped because it matched with a Traffic
Selector for a Security Association that was active at
the time of receipt but the frame was not protected as
negotiated for that Security Association.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 18 }
t11FcSpSaIfInBadXforms OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a frame received on this
interface was dropped because of a failure of one of the
transforms negotiated for the Security Association on
which it was received.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 19 }
De Santi, et al. Standards Track [Page 161]
RFC 5324 MIB for FC-SP September 2008
t11FcSpSaIfInGoodXforms OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received on this interface on a
Security Association for which the transforms negotiated
for that Security Association were successfully applied,
and that matched a Traffic Selector for that Security
Association.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 20 }
t11FcSpSaIfInProtUnmtchs OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received on this interface that
were dropped because they did not match any of the Traffic
Selectors negotiated for the Security Association on which
they were received, even though the Security Association's
transforms were successfully applied.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 21 }
--
-- Proposals to present in Security Association negotiation
--
t11FcSpSaPropTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaPropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of proposals for an FC-SP entity acting as an
SA_Initiator to present to the SA_Responder during the
negotiation of Security Associations. This information
is also used by an FC-SP entity acting as an SA_Responder
to decide what to accept during the negotiation of
Security Associations."
::= { t11FcSpSaConfig 1 }
t11FcSpSaPropEntry OBJECT-TYPE
De Santi, et al. Standards Track [Page 162]
RFC 5324 MIB for FC-SP September 2008
SYNTAX T11FcSpSaPropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one proposal for
the FC-SP entity to present, or what to accept, during
the negotiation of Security Associations on one or more
interfaces (identified by t11FcSpSaIfIndex) to a
particular Fabric (identified by t11FcSpSaIfFabricIndex),
and managed as part of the Fibre Channel management
instance identified by fcmInstanceIndex.
The StorageType of a row in this table is specified by
the instance of t11FcSpSaIfStorageType that is INDEX-ed
by the same values of fcmInstanceIndex, t11FcSpSaIfIndex
and t11FcSpSaIfFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpSaIfIndex,
t11FcSpSaIfFabricIndex,
t11FcSpSaPropIndex }
::= { t11FcSpSaPropTable 1 }
T11FcSpSaPropEntry ::= SEQUENCE {
t11FcSpSaPropIndex Unsigned32,
t11FcSpSaPropSecurityProt T11FcSpSecurityProtocolId,
t11FcSpSaPropTSelListIndex Unsigned32,
t11FcSpSaPropTransListIndex Unsigned32,
t11FcSpSaPropAcceptAlgorithm INTEGER,
t11FcSpSaPropOutMatchSucceeds Counter64,
t11FcSpSaPropRowStatus RowStatus
}
t11FcSpSaPropIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
proposal for use on one or more interfaces to a Fabric."
::= { t11FcSpSaPropEntry 1 }
t11FcSpSaPropSecurityProt OBJECT-TYPE
SYNTAX T11FcSpSecurityProtocolId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Security Protocol identifier for this proposal, i.e.,
whether the proposal is for traffic to be protected using
ESP_Header or CT_Authentication."
De Santi, et al. Standards Track [Page 163]
RFC 5324 MIB for FC-SP September 2008
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.3.2.2 and table 67."
::= { t11FcSpSaPropEntry 2 }
t11FcSpSaPropTSelListIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the value of this object is non-zero, it points
to the proposal's list of Traffic Selectors. The value
must be non-zero in an active row of this table.
The identified list is represented by all rows in the
t11FcSpSaTSelPropTable for which t11FcSpSaTSelPropListIndex
has the same value as this object (and with corresponding
values of t11FcSpSaIfIndex and fcmInstanceIndex)."
::= { t11FcSpSaPropEntry 3 }
t11FcSpSaPropTransListIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the value of this object is non-zero, it points to
the proposal's list of Transforms. The value must be
non-zero in an active row of this table.
The identified list is represented by all rows in the
t11FcSpSaTransTable for which t11FcSpSaTransListIndex
has the same value as this object (and with corresponding
values of t11FcSpSaIfIndex and fcmInstanceIndex)."
::= { t11FcSpSaPropEntry 4 }
t11FcSpSaPropAcceptAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
intersection(1),
union(2),
other(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The algorithm by which an SA_Responder in an SA negotiation
decides on which Traffic Selectors to specify in a response
to an IKE_Create_Child_SA request. This algorithm is used
De Santi, et al. Standards Track [Page 164]
RFC 5324 MIB for FC-SP September 2008
when the Traffic Selectors specified by an SA_Initiator in
an IKE_Create_Child_SA request overlap with this proposal's
list of Traffic Selectors:
intersection(1) - the SA_Responder specifies the largest
subset of what the SA_Initiator proposed,
which is also a subset of this proposal's
Traffic Selectors.
union(2) - the SA_Responder specifies the smallest
superset of what the SA_Initiator proposed,
which is also a superset of this proposal's
Traffic Selectors.
other(3) - the SA_Responder uses some other algorithm.
"
::= { t11FcSpSaPropEntry 5 }
t11FcSpSaPropOutMatchSucceeds OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of egress frames that have matched a Traffic
Selector that was negotiated to select traffic for an
SA based on this proposal being accepted.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaPropEntry 6 }
t11FcSpSaPropRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of a row. Values of object instances
within an active row can be modified at any time.
The status cannot be set to 'active' unless and
until the instances of t11FcSpSaPropTSelListIndex
and t11FcSpSaPropTransListIndex in the row have
been set to point to active rows in the
t11FcSpSaTSelPropTable and t11FcSpSaTransTable
tables, respectively. A row in this table is
deleted if the active rows it points to are deleted."
::= { t11FcSpSaPropEntry 7 }
De Santi, et al. Standards Track [Page 165]
RFC 5324 MIB for FC-SP September 2008
--
-- Traffic Selector Proposals
--
t11FcSpSaTSelPropTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaTSelPropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about Traffic Selectors
to propose and/or to accept during the negotiation of
Security Associations."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5.
- Use of IKEv2 in FC-SP, RFC 4595,
July 2006, section 4.4."
::= { t11FcSpSaConfig 2 }
t11FcSpSaTSelPropEntry OBJECT-TYPE
SYNTAX T11FcSpSaTSelPropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Traffic
Selector within a list of Traffic Selectors to propose,
or for use in determining what to accept during Security
Association negotiation.
One such list is configured for use on a Fabric by
configuring the list's value of t11FcSpSaTSelPropListIndex
as the value of an instance of t11FcSpSaPropTSelListIndex,
for corresponding values of t11FcSpSaIfIndex and
fcmInstanceIndex. Further, the proposing and accepting
of Traffic Selectors is only done as a part of a proposal
specified by a row of the t11FcSpSaPropTable, i.e.,
in combination with the proposing and accepting of security
transforms as specified by the combination of
t11FcSpSaPropTSelListIndex and t11FcSpSaPropTransListIndex
in one row of the t11FcSpSaPropTable.
The StorageType of a row in this table is specified by
the instance of t11FcSpSaTSelPropStorageType in that row."
INDEX { fcmInstanceIndex, t11FcSpSaIfIndex,
t11FcSpSaTSelPropListIndex, t11FcSpSaTSelPropPrecedence }
::= { t11FcSpSaTSelPropTable 1 }
De Santi, et al. Standards Track [Page 166]
RFC 5324 MIB for FC-SP September 2008
T11FcSpSaTSelPropEntry ::= SEQUENCE {
t11FcSpSaTSelPropListIndex Unsigned32,
t11FcSpSaTSelPropPrecedence T11FcSpPrecedence,
t11FcSpSaTSelPropDirection T11FcSaDirection,
t11FcSpSaTSelPropStartSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelPropEndSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelPropStartDstAddr FcAddressIdOrZero,
t11FcSpSaTSelPropEndDstAddr FcAddressIdOrZero,
t11FcSpSaTSelPropStartRCtl T11FcRoutingControl,
t11FcSpSaTSelPropEndRCtl T11FcRoutingControl,
t11FcSpSaTSelPropStartType T11FcSpType,
t11FcSpSaTSelPropEndType T11FcSpType,
t11FcSpSaTSelPropStorageType StorageType,
t11FcSpSaTSelPropRowStatus RowStatus
}
t11FcSpSaTSelPropListIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that identifies a particular list of
Traffic Selectors."
::= { t11FcSpSaTSelPropEntry 1 }
t11FcSpSaTSelPropPrecedence OBJECT-TYPE
SYNTAX T11FcSpPrecedence
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The precedence of this Traffic Selector. Each
Traffic Selector within a particular list of
Traffic Selectors must have a different precedence.
If an egress frame matches multiple Traffic Selectors,
it should be transmitted on the SA associated with the
Traffic Selector having the numerically smallest
precedence value."
::= { t11FcSpSaTSelPropEntry 2 }
t11FcSpSaTSelPropDirection OBJECT-TYPE
SYNTAX T11FcSaDirection
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An indication of whether this Traffic Selector is
to be proposed for ingress or egress traffic."
DEFVAL { egress }
De Santi, et al. Standards Track [Page 167]
RFC 5324 MIB for FC-SP September 2008
::= { t11FcSpSaTSelPropEntry 3 }
t11FcSpSaTSelPropStartSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { '000000'h }
::= { t11FcSpSaTSelPropEntry 4 }
t11FcSpSaTSelPropEndSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically largest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { 'FFFFFF'h }
::= { t11FcSpSaTSelPropEntry 5 }
t11FcSpSaTSelPropStartDstAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { '000000'h }
::= { t11FcSpSaTSelPropEntry 6 }
t11FcSpSaTSelPropEndDstAddr OBJECT-TYPE
De Santi, et al. Standards Track [Page 168]
RFC 5324 MIB for FC-SP September 2008
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically largest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { 'FFFFFF'h }
::= { t11FcSpSaTSelPropEntry 7 }
t11FcSpSaTSelPropStartRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically smallest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { '00'h }
::= { t11FcSpSaTSelPropEntry 8 }
t11FcSpSaTSelPropEndRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically largest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { 'FF'h }
::= { t11FcSpSaTSelPropEntry 9 }
t11FcSpSaTSelPropStartType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-create
STATUS current
De Santi, et al. Standards Track [Page 169]
RFC 5324 MIB for FC-SP September 2008
DESCRIPTION
"The numerically smallest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { '0000'h }
::= { t11FcSpSaTSelPropEntry 10 }
t11FcSpSaTSelPropEndType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically largest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { 'FFFF'h }
::= { t11FcSpSaTSelPropEntry 11 }
t11FcSpSaTSelPropStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the memory realization of
the information in this row.
Even if an instance of this object has the value
'permanent(4)', none of the information in its row
needs to be writable."
::= { t11FcSpSaTSelPropEntry 12 }
t11FcSpSaTSelPropRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpSaTSelPropEntry 13 }
De Santi, et al. Standards Track [Page 170]
RFC 5324 MIB for FC-SP September 2008
--
-- Transform Proposals
--
t11FcSpSaTransTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaTransEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about security transforms
to propose, to accept and/or agreed upon during the
negotiation of Security Associations."
::= { t11FcSpSaConfig 3 }
t11FcSpSaTransEntry OBJECT-TYPE
SYNTAX T11FcSpSaTransEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one proposal within a
list of security transforms to be proposed, to be accepted,
or already agreed upon, for use on a pair of Security
Associations on one or more interfaces (identified by
t11FcSpSaIfIndex), managed as part of the Fibre Channel
management instance identified by fcmInstanceIndex.
One such list is configured to be proposed or accepted for
use on a Fabric, by having the list's value of
t11FcSpSaTransListIndex be the value of an instance of
t11FcSpSaPropTransListIndex for that Fabric. Further,
the proposing and accepting of security transforms is only
done as a part of a proposal specified by a row of the
t11FcSpSaPropTable, i.e., in combination with the proposing
and accepting of Traffic Selectors as specified by the
combination of t11FcSpSaPropTSelListIndex and
t11FcSpSaPropTransListIndex in one row of the
t11FcSpSaPropTable.
The security (encryption and integrity) transform in use on
an SA pair is indicated by having the pair's values of
t11FcSpSaPairTransListIndex and t11FcSpSaPairTransIndex
contain the values of t11FcSpSaTransListIndex and
t11FcSpSaTransIndex for the transform's row in this table.
The StorageType of a row in this table is specified by
the instance of t11FcSpSaTransStorageType in that row."
INDEX { fcmInstanceIndex, t11FcSpSaIfIndex,
t11FcSpSaTransListIndex, t11FcSpSaTransIndex }
De Santi, et al. Standards Track [Page 171]
RFC 5324 MIB for FC-SP September 2008
::= { t11FcSpSaTransTable 1 }
T11FcSpSaTransEntry ::= SEQUENCE {
t11FcSpSaTransListIndex Unsigned32,
t11FcSpSaTransIndex Unsigned32,
t11FcSpSaTransSecurityProt T11FcSpSecurityProtocolId,
t11FcSpSaTransEncryptAlg AutonomousType,
t11FcSpSaTransEncryptKeyLen Unsigned32,
t11FcSpSaTransIntegrityAlg AutonomousType,
t11FcSpSaTransStorageType StorageType,
t11FcSpSaTransRowStatus RowStatus
}
t11FcSpSaTransListIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
list of security transforms to be proposed, to be accepted,
or already agreed upon."
::= { t11FcSpSaTransEntry 1 }
t11FcSpSaTransIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies one security
transform within a list identified by
t11FcSpSaTransListIndex."
::= { t11FcSpSaTransEntry 2 }
t11FcSpSaTransSecurityProt OBJECT-TYPE
SYNTAX T11FcSpSecurityProtocolId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Security Protocol identifier that indicates
whether this transform is for traffic to be protected
using ESP_Header or using CT_Authentication."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.3.2.2 and table 67."
::= { t11FcSpSaTransEntry 3 }
t11FcSpSaTransEncryptAlg OBJECT-TYPE
De Santi, et al. Standards Track [Page 172]
RFC 5324 MIB for FC-SP September 2008
SYNTAX AutonomousType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Encryption Algorithm for this transform."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.3.2.3 and tables 69 & 70."
::= { t11FcSpSaTransEntry 4 }
t11FcSpSaTransEncryptKeyLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The key length in bits to be used with an encryption
algorithm that has a variable length key. This object
is ignored when the corresponding instance of
t11FcSpSaTransEncryptAlg specifies an algorithm with a
fixed length key."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.3.2.5 and table 77."
::= { t11FcSpSaTransEntry 5 }
t11FcSpSaTransIntegrityAlg OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Integrity Algorithm for this transform."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.3.2.3 and tables 69 & 72."
::= { t11FcSpSaTransEntry 6 }
t11FcSpSaTransStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the memory realization of
the information in this row.
Even if an instance of this object has the value
De Santi, et al. Standards Track [Page 173]
RFC 5324 MIB for FC-SP September 2008
'permanent(4)', none of the information in its row
needs to be writable."
::= { t11FcSpSaTransEntry 7 }
t11FcSpSaTransRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
When an instance of t11FcSpSaPairTransListIndex points to
a row in this table, values of object instances in the row
cannot be modified nor can the row be deleted. Otherwise,
a row can be modified or deleted at any time."
::= { t11FcSpSaTransEntry 8 }
--
-- Traffic Selectors for Drop & Bypass
--
t11FcSpSaTSelDrByTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaTSelDrByEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing Traffic Selectors to select which
traffic is to be dropped or is to bypass further
security processing."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 4.6, 4.7, and 6.4.5.
- Use of IKEv2 in FC-SP, RFC 4595,
July 2006, section 4.4."
::= { t11FcSpSaConfig 4 }
t11FcSpSaTSelDrByEntry OBJECT-TYPE
SYNTAX T11FcSpSaTSelDrByEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents one Traffic Selector having the
security action of 'drop' or 'bypass', which is applied
based on a precedence value, either to ingress traffic
that is unprotected by FC-SP, or to all egress
traffic on one or more interfaces (identified by
t11FcSpSaIfIndex) to a particular Fabric (identified
De Santi, et al. Standards Track [Page 174]
RFC 5324 MIB for FC-SP September 2008
by t11FcSpSaIfFabricIndex), and managed as part of the Fibre
Channel management instance identified by fcmInstanceIndex.
The StorageType of a row in this table is specified by
the instance of t11FcSpSaIfStorageType that is INDEX-ed
by the same values of fcmInstanceIndex, t11FcSpSaIfIndex
and t11FcSpSaIfFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpSaIfIndex, t11FcSpSaIfFabricIndex,
t11FcSpSaTSelDrByDirection, t11FcSpSaTSelDrByPrecedence }
::= { t11FcSpSaTSelDrByTable 1 }
T11FcSpSaTSelDrByEntry ::= SEQUENCE {
t11FcSpSaTSelDrByDirection T11FcSaDirection,
t11FcSpSaTSelDrByPrecedence T11FcSpPrecedence,
t11FcSpSaTSelDrByAction INTEGER,
t11FcSpSaTSelDrByStartSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelDrByEndSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelDrByStartDstAddr FcAddressIdOrZero,
t11FcSpSaTSelDrByEndDstAddr FcAddressIdOrZero,
t11FcSpSaTSelDrByStartRCtl T11FcRoutingControl,
t11FcSpSaTSelDrByEndRCtl T11FcRoutingControl,
t11FcSpSaTSelDrByStartType T11FcSpType,
t11FcSpSaTSelDrByEndType T11FcSpType,
t11FcSpSaTSelDrByMatches Counter64,
t11FcSpSaTSelDrByRowStatus RowStatus
}
t11FcSpSaTSelDrByDirection OBJECT-TYPE
SYNTAX T11FcSaDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of whether this Traffic Selector is
for ingress or egress traffic."
::= { t11FcSpSaTSelDrByEntry 1 }
t11FcSpSaTSelDrByPrecedence OBJECT-TYPE
SYNTAX T11FcSpPrecedence
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The precedence of this Traffic Selector. If and when a
frame is compared against multiple Traffic Selectors, and
multiple of them have a match with the frame, the security
action to be taken for the frame is that specified for the
matching Traffic Selector having the numerically smallest
precedence value."
::= { t11FcSpSaTSelDrByEntry 2 }
De Santi, et al. Standards Track [Page 175]
RFC 5324 MIB for FC-SP September 2008
t11FcSpSaTSelDrByAction OBJECT-TYPE
SYNTAX INTEGER { drop(1), bypass(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The security action to be taken for a frame that
matches this Traffic Selector."
DEFVAL { drop }
::= { t11FcSpSaTSelDrByEntry 3 }
t11FcSpSaTSelDrByStartSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
DEFVAL { '000000'h }
::= { t11FcSpSaTSelDrByEntry 4 }
t11FcSpSaTSelDrByEndSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically largest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
DEFVAL { 'FFFFFF'h }
::= { t11FcSpSaTSelDrByEntry 5 }
t11FcSpSaTSelDrByStartDstAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
DEFVAL { '000000'h }
::= { t11FcSpSaTSelDrByEntry 6 }
t11FcSpSaTSelDrByEndDstAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
De Santi, et al. Standards Track [Page 176]
RFC 5324 MIB for FC-SP September 2008
"The numerically largest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
DEFVAL { 'FFFFFF'h }
::= { t11FcSpSaTSelDrByEntry 7 }
t11FcSpSaTSelDrByStartRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically smallest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
DEFVAL { '00'h }
::= { t11FcSpSaTSelDrByEntry 8 }
t11FcSpSaTSelDrByEndRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically largest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
DEFVAL { 'FF'h }
::= { t11FcSpSaTSelDrByEntry 9 }
t11FcSpSaTSelDrByStartType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically smallest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
DEFVAL { '0000'h }
::= { t11FcSpSaTSelDrByEntry 10 }
t11FcSpSaTSelDrByEndType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically largest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
DEFVAL { 'FFFF'h }
De Santi, et al. Standards Track [Page 177]
RFC 5324 MIB for FC-SP September 2008
::= { t11FcSpSaTSelDrByEntry 11 }
t11FcSpSaTSelDrByMatches OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames for which the action specified by
the corresponding instance of t11FcSpSaTSelDrByAction was
taken because of a match with this Traffic Selector.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaTSelDrByEntry 12 }
t11FcSpSaTSelDrByRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpSaTSelDrByEntry 13 }
--
-- Active Security Associations
--
t11FcSpSaPairTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaPairEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about active
bidirectional pairs of Security Associations."
::= { t11FcSpSaActive 1 }
t11FcSpSaPairEntry OBJECT-TYPE
SYNTAX T11FcSpSaPairEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one active
bidirectional pair of Security Associations on an
interface to a particular Fabric (identified by
t11FcSpSaIfFabricIndex), managed as part of the Fibre
Channel management instance identified by
fcmInstanceIndex."
De Santi, et al. Standards Track [Page 178]
RFC 5324 MIB for FC-SP September 2008
INDEX { fcmInstanceIndex, t11FcSpSaPairIfIndex,
t11FcSpSaIfFabricIndex, t11FcSpSaPairInboundSpi }
::= { t11FcSpSaPairTable 1 }
T11FcSpSaPairEntry ::= SEQUENCE {
t11FcSpSaPairIfIndex InterfaceIndex,
t11FcSpSaPairInboundSpi T11FcSpiIndex,
t11FcSpSaPairSecurityProt T11FcSpSecurityProtocolId,
t11FcSpSaPairTransListIndex Unsigned32,
t11FcSpSaPairTransIndex Unsigned32,
t11FcSpSaPairLifetimeLeft T11FcSpLifetimeLeft,
t11FcSpSaPairLifetimeLeftUnits T11FcSpLifetimeLeftUnits,
t11FcSpSaPairTerminate INTEGER,
t11FcSpSaPairInProtUnMatchs Counter64,
t11FcSpSaPairInDetReplays Counter64,
t11FcSpSaPairInBadXforms Counter64,
t11FcSpSaPairInGoodXforms Counter64
}
t11FcSpSaPairIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the interface to the particular
Fabric on which this SA pair is active."
::= { t11FcSpSaPairEntry 1 }
t11FcSpSaPairInboundSpi OBJECT-TYPE
SYNTAX T11FcSpiIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SPI value that is used to indicate that an incoming
frame was received on the ingress SA of this SA pair."
::= { t11FcSpSaPairEntry 2 }
t11FcSpSaPairSecurityProt OBJECT-TYPE
SYNTAX T11FcSpSecurityProtocolId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether this SA uses ESP_Header to
protect FC-2 frames, or CT_Authentication to protect Common
Transport Information Units (CT_IUs)."
::= { t11FcSpSaPairEntry 3 }
t11FcSpSaPairTransListIndex OBJECT-TYPE
De Santi, et al. Standards Track [Page 179]
RFC 5324 MIB for FC-SP September 2008
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The combination of this value and the value of the
corresponding instance of t11FcSpSaPairTransIndex
identify the row in the t11FcSpSaTransTable that
contains the transforms that are in use on this SA pair."
::= { t11FcSpSaPairEntry 4 }
t11FcSpSaPairTransIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The combination of this value and the value of the
corresponding instance of t11FcSpSaPairTransListIndex
identify the row in the t11FcSpSaTransTable that
contains the transforms that are in use on this SA pair."
::= { t11FcSpSaPairEntry 5 }
t11FcSpSaPairLifetimeLeft OBJECT-TYPE
SYNTAX T11FcSpLifetimeLeft
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remaining lifetime of this SA pair, given in the
units specified by the value of the corresponding
instance of t11FcSpSaPairLifetimeLeft."
::= { t11FcSpSaPairEntry 6 }
t11FcSpSaPairLifetimeLeftUnits OBJECT-TYPE
SYNTAX T11FcSpLifetimeLeftUnits
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The units in which the value of the corresponding
instance of t11FcSpSaPairLifetimeLeft specifies the
remaining lifetime of this SA pair."
::= { t11FcSpSaPairEntry 7 }
t11FcSpSaPairTerminate OBJECT-TYPE
SYNTAX INTEGER { noop(1), terminate(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'terminate' is a request
to terminate this pair of Security Associations.
De Santi, et al. Standards Track [Page 180]
RFC 5324 MIB for FC-SP September 2008
When read, the value of this object is always 'noop'.
Setting this object to 'noop' has no effect."
::= { t11FcSpSaPairEntry 8 }
t11FcSpSaPairInProtUnMatchs OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received on this SA for which the
SA's transforms were successfully applied to the frame,
but the frame was still dropped because it did not match
any of the SA's ingress Traffic Selectors.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaPairEntry 9 }
t11FcSpSaPairInDetReplays OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a replay has been detected on
this Security Association. Note that a frame that is
discarded because it is 'behind' the window, i.e., too old,
is counted as a replay.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaPairEntry 10 }
t11FcSpSaPairInBadXforms OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a received frame was dropped
because one of the transforms negotiated for this Security
Association failed.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaPairEntry 11 }
t11FcSpSaPairInGoodXforms OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
De Santi, et al. Standards Track [Page 181]
RFC 5324 MIB for FC-SP September 2008
STATUS current
DESCRIPTION
"The number of received frames for which the transforms
negotiated for this Security Association, were
successfully applied.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaPairEntry 12 }
--
-- Negotiated Ingress Traffic Selectors
--
t11FcSpSaTSelNegInTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaTSelNegInEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about ingress Traffic
Selectors that are in use on active Security
Associations."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 4.6, 4.7, and 6.4.5.
- Use of IKEv2 in FC-SP, RFC 4595,
July 2006, section 4.4."
::= { t11FcSpSaActive 2 }
t11FcSpSaTSelNegInEntry OBJECT-TYPE
SYNTAX T11FcSpSaTSelNegInEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one ingress Traffic
Selector that is in use on an active Security Association
on an interface (identified by t11FcSpSaPairIfIndex) to
a particular Fabric (identified by t11FcSpSaIfFabricIndex),
managed as part of the Fibre Channel management instance
identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpSaPairIfIndex,
t11FcSpSaIfFabricIndex, t11FcSpSaTSelNegInIndex }
::= { t11FcSpSaTSelNegInTable 1 }
T11FcSpSaTSelNegInEntry ::= SEQUENCE {
t11FcSpSaTSelNegInIndex Unsigned32,
t11FcSpSaTSelNegInInboundSpi T11FcSpiIndex,
De Santi, et al. Standards Track [Page 182]
RFC 5324 MIB for FC-SP September 2008
t11FcSpSaTSelNegInStartSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelNegInEndSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelNegInStartDstAddr FcAddressIdOrZero,
t11FcSpSaTSelNegInEndDstAddr FcAddressIdOrZero,
t11FcSpSaTSelNegInStartRCtl T11FcRoutingControl,
t11FcSpSaTSelNegInEndRCtl T11FcRoutingControl,
t11FcSpSaTSelNegInStartType T11FcSpType,
t11FcSpSaTSelNegInEndType T11FcSpType,
t11FcSpSaTSelNegInUnpMtchDrops Counter64
}
t11FcSpSaTSelNegInIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value to distinguish an ingress Traffic Selector
from all others currently in use by Security Associations
on the same interface to a particular Fabric."
::= { t11FcSpSaTSelNegInEntry 1 }
t11FcSpSaTSelNegInInboundSpi OBJECT-TYPE
SYNTAX T11FcSpiIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPI of the ingress SA on which this Traffic Selector
is in use.
This value can be used to find the SA pair's row in the
t11FcSpSaPairTable."
::= { t11FcSpSaTSelNegInEntry 2 }
t11FcSpSaTSelNegInStartSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegInEntry 3 }
t11FcSpSaTSelNegInEndSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
De Santi, et al. Standards Track [Page 183]
RFC 5324 MIB for FC-SP September 2008
"The numerically largest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegInEntry 4 }
t11FcSpSaTSelNegInStartDstAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
::= { t11FcSpSaTSelNegInEntry 5 }
t11FcSpSaTSelNegInEndDstAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically largest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
::= { t11FcSpSaTSelNegInEntry 6 }
t11FcSpSaTSelNegInStartRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically smallest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
::= { t11FcSpSaTSelNegInEntry 7 }
t11FcSpSaTSelNegInEndRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically largest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
::= { t11FcSpSaTSelNegInEntry 8 }
t11FcSpSaTSelNegInStartType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-only
De Santi, et al. Standards Track [Page 184]
RFC 5324 MIB for FC-SP September 2008
STATUS current
DESCRIPTION
"The numerically smallest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegInEntry 9 }
t11FcSpSaTSelNegInEndType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically largest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegInEntry 10 }
t11FcSpSaTSelNegInUnpMtchDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a received frame was dropped
because it matched with this Traffic Selector but the
frame was not protected as negotiated for the Security
Association identified by t11FcSpSaTSelNegInInboundSpi.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaTSelNegInEntry 11 }
--
-- Negotiated Egress Traffic Selectors
--
t11FcSpSaTSelNegOutTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaTSelNegOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about egress Traffic
Selectors that are in use on active Security
Associations."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 4.6, 4.7, and 6.4.5.
- Use of IKEv2 in FC-SP, RFC 4595,
De Santi, et al. Standards Track [Page 185]
RFC 5324 MIB for FC-SP September 2008
July 2006, section 4.4."
::= { t11FcSpSaActive 3 }
t11FcSpSaTSelNegOutEntry OBJECT-TYPE
SYNTAX T11FcSpSaTSelNegOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one egress Traffic
Selector that is in use on an active Security Association
on an interface (identified by t11FcSpSaPairIfIndex) to
a particular Fabric (identified by t11FcSpSaIfFabricIndex),
managed as part of the Fibre Channel management instance
identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpSaPairIfIndex,
t11FcSpSaIfFabricIndex, t11FcSpSaTSelNegOutPrecedence }
::= { t11FcSpSaTSelNegOutTable 1 }
T11FcSpSaTSelNegOutEntry ::= SEQUENCE {
t11FcSpSaTSelNegOutPrecedence T11FcSpPrecedence,
t11FcSpSaTSelNegOutInboundSpi T11FcSpiIndex,
t11FcSpSaTSelNegOutStartSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelNegOutEndSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelNegOutStartDstAddr FcAddressIdOrZero,
t11FcSpSaTSelNegOutEndDstAddr FcAddressIdOrZero,
t11FcSpSaTSelNegOutStartRCtl T11FcRoutingControl,
t11FcSpSaTSelNegOutEndRCtl T11FcRoutingControl,
t11FcSpSaTSelNegOutStartType T11FcSpType,
t11FcSpSaTSelNegOutEndType T11FcSpType
}
t11FcSpSaTSelNegOutPrecedence OBJECT-TYPE
SYNTAX T11FcSpPrecedence
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The precedence of this Traffic Selector. If and when a
frame is compared against multiple Traffic Selectors, and
multiple of them have a match with the frame, the security
action to be taken for the frame is that specified for the
matching Traffic Selector having the numerically smallest
precedence value."
::= { t11FcSpSaTSelNegOutEntry 1 }
t11FcSpSaTSelNegOutInboundSpi OBJECT-TYPE
SYNTAX T11FcSpiIndex
MAX-ACCESS read-only
STATUS current
De Santi, et al. Standards Track [Page 186]
RFC 5324 MIB for FC-SP September 2008
DESCRIPTION
"The SPI of the ingress SA of the SA pair for which this
Traffic Selector is in use on the egress SA.
This value can be used to find the SA pair's row in the
t11FcSpSaPairTable."
::= { t11FcSpSaTSelNegOutEntry 2 }
t11FcSpSaTSelNegOutStartSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegOutEntry 3 }
t11FcSpSaTSelNegOutEndSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically largest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegOutEntry 4 }
t11FcSpSaTSelNegOutStartDstAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
::= { t11FcSpSaTSelNegOutEntry 5 }
t11FcSpSaTSelNegOutEndDstAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically largest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
::= { t11FcSpSaTSelNegOutEntry 6 }
De Santi, et al. Standards Track [Page 187]
RFC 5324 MIB for FC-SP September 2008
t11FcSpSaTSelNegOutStartRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically smallest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
::= { t11FcSpSaTSelNegOutEntry 7 }
t11FcSpSaTSelNegOutEndRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically largest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
::= { t11FcSpSaTSelNegOutEntry 8 }
t11FcSpSaTSelNegOutStartType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically smallest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegOutEntry 9 }
t11FcSpSaTSelNegOutEndType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically largest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegOutEntry 10 }
--
-- Traffic Selectors index-ed by SPI
--
t11FcSpSaTSelSpiTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaTSelSpiEntry
MAX-ACCESS not-accessible
STATUS current
De Santi, et al. Standards Track [Page 188]
RFC 5324 MIB for FC-SP September 2008
DESCRIPTION
"A table identifying the Traffic Selectors in use on
particular Security Associations, INDEX-ed by their
(ingress) SPI values."
::= { t11FcSpSaActive 4 }
t11FcSpSaTSelSpiEntry OBJECT-TYPE
SYNTAX T11FcSpSaTSelSpiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry identifies one Traffic Selector in use on an SA
pair on the interface (identified by t11FcSpSaPairIfIndex)
to a particular Fabric (identified by
t11FcSpSaIfFabricIndex), and managed as part of the Fibre
Channel management instance identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpSaPairIfIndex,
t11FcSpSaIfFabricIndex,
t11FcSpSaTSelSpiInboundSpi, t11FcSpSaTSelSpiTrafSelIndex }
::= { t11FcSpSaTSelSpiTable 1 }
T11FcSpSaTSelSpiEntry ::= SEQUENCE {
t11FcSpSaTSelSpiInboundSpi T11FcSpiIndex,
t11FcSpSaTSelSpiTrafSelIndex Unsigned32,
t11FcSpSaTSelSpiDirection T11FcSaDirection,
t11FcSpSaTSelSpiTrafSelPtr Unsigned32
}
t11FcSpSaTSelSpiInboundSpi OBJECT-TYPE
SYNTAX T11FcSpiIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An SPI value that identifies the ingress Security
Association of a particular SA pair."
::= { t11FcSpSaTSelSpiEntry 1 }
t11FcSpSaTSelSpiTrafSelIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that distinguishes between the
(potentially multiple) Traffic Selectors in use on
this Security Association pair."
::= { t11FcSpSaTSelSpiEntry 2 }
t11FcSpSaTSelSpiDirection OBJECT-TYPE
De Santi, et al. Standards Track [Page 189]
RFC 5324 MIB for FC-SP September 2008
SYNTAX T11FcSaDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether this Traffic Selector
is being used for ingress or for egress traffic."
::= { t11FcSpSaTSelSpiEntry 3 }
t11FcSpSaTSelSpiTrafSelPtr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains a pointer into another table that
can be used to obtain more information about this Traffic
Selector.
If the corresponding instance of t11FcSpSaTSelSpiDirection
has the value 'egress', then this object contains the
value of t11FcSpSaTSelNegOutPrecedence in the row of
t11FcSpSaTSelNegOutTable, which contains more information.
If the corresponding instance of t11FcSpSaTSelSpiDirection
has the value 'ingress', then this object contains the
value of t11FcSpSaTSelNegInIndex that identifies the row
in t11FcSpSaTSelNegInTable containing more information."
::= { t11FcSpSaTSelSpiEntry 4 }
--
-- Notification information & control
--
t11FcSpSaControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of control and other information concerning
the generation of notifications for events related
to FC-SP Security Associations."
::= { t11FcSpSaControl 1 }
t11FcSpSaControlEntry OBJECT-TYPE
SYNTAX T11FcSpSaControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry identifies information for the one or more
De Santi, et al. Standards Track [Page 190]
RFC 5324 MIB for FC-SP September 2008
interfaces (identified by t11FcSpSaIfIndex) to a
particular Fabric (identified by t11FcSpSaIfFabricIndex),
and managed as part of the Fibre Channel management
instance identified by fcmInstanceIndex.
The StorageType of a row in this table is specified by
the instance of t11FcSpSaIfStorageType that is INDEX-ed
by the same values of fcmInstanceIndex, t11FcSpSaIfIndex,
and t11FcSpSaIfFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpSaIfIndex,
t11FcSpSaIfFabricIndex }
::= { t11FcSpSaControlTable 1 }
T11FcSpSaControlEntry ::= SEQUENCE {
t11FcSpSaControlAuthFailEnable TruthValue,
t11FcSpSaControlInboundSpi T11FcSpiIndex,
t11FcSpSaControlSource FcAddressIdOrZero,
t11FcSpSaControlDestination FcAddressIdOrZero,
t11FcSpSaControlFrame OCTET STRING,
t11FcSpSaControlElapsed TimeTicks,
t11FcSpSaControlSuppressed Gauge32,
t11FcSpSaControlWindow Unsigned32,
t11FcSpSaControlMaxNotifs Unsigned32,
t11FcSpSaControlLifeExcdEnable TruthValue,
t11FcSpSaControlLifeExcdSpi T11FcSpiIndex,
t11FcSpSaControlLifeExcdDir T11FcSaDirection,
t11FcSpSaControlLifeExcdTime TimeStamp
}
t11FcSpSaControlAuthFailEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether a t11FcSpSaNotifyAuthFailure
notification should be generated for the first occurrence
of an Authentication failure within a time window for this
Fabric."
::= { t11FcSpSaControlEntry 1 }
t11FcSpSaControlInboundSpi OBJECT-TYPE
SYNTAX T11FcSpiIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPI value of the ingress Security Association on
which was received the last frame for which a
t11FcSpSaNotifyAuthFailure was generated.
De Santi, et al. Standards Track [Page 191]
RFC 5324 MIB for FC-SP September 2008
If no t11FcSpSaNotifyAuthFailure notifications have
been generated, the value of this object is zero."
::= { t11FcSpSaControlEntry 2 }
t11FcSpSaControlSource OBJECT-TYPE
SYNTAX FcAddressIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The S_ID contained in the last frame for which a
t11FcSpSaNotifyAuthFailure was generated.
If no t11FcSpSaNotifyAuthFailure notifications have
been generated, the value of this object is the
zero-length string."
::= { t11FcSpSaControlEntry 3 }
t11FcSpSaControlDestination OBJECT-TYPE
SYNTAX FcAddressIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The D_ID contained in the last frame for which a
t11FcSpSaNotifyAuthFailure was generated.
If no t11FcSpSaNotifyAuthFailure notifications have
been generated, the value of this object is the
zero-length string."
::= { t11FcSpSaControlEntry 4 }
t11FcSpSaControlFrame OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The binary content of the last frame for which a
t11FcSpSaNotifyAuthFailure was generated. If more than
256 bytes of the frame are available, then this object
contains the first 256 bytes. If less than 256 bytes of
the frame are available, then this object contains the
first N bytes, where N is greater or equal to zero.
If no t11FcSpSaNotifyAuthFailure notifications have
been generated, the value of this object is the
zero-length string."
::= { t11FcSpSaControlEntry 5 }
t11FcSpSaControlElapsed OBJECT-TYPE
De Santi, et al. Standards Track [Page 192]
RFC 5324 MIB for FC-SP September 2008
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time since the last generation of a
t11FcSpSaNotifyAuthFailure notification on the same
Fabric, or the value of sysUpTime if no
t11FcSpSaNotifyAuthFailure notifications have been
generated since the last restart."
::= { t11FcSpSaControlEntry 6 }
t11FcSpSaControlSuppressed OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occurrences of an Authentication failure
on a Fabric that were suppressed because they occurred
on the same Fabric within the same time window as a
previous Authentication failure for which a
t11FcSpSaNotifyAuthFailure notification was generated.
The value of this object is reset to zero on a restart
of the network management subsystem, and whenever a
t11FcSpSaNotifyAuthFailure notification is generated.
In the event that the value of this object reaches its
maximum value, it remains at that value until it is
reset on the generation of the next
t11FcSpSaNotifyAuthFailure notification."
::= { t11FcSpSaControlEntry 7 }
t11FcSpSaControlWindow OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The length of a time window that begins when a
t11FcSpSaNotifyAuthFailure notification is generated for
any Security Association on a particular Fabric. For the
duration of the time window, further Authentication failures
occurring for the same Security Association are counted but
no t11FcSpSaNotifyAuthFailure notification is generated.
When this object is modified before the end of a time
window, that time window is immediately terminated, i.e.,
the next Authentication failure on the relevant Fabric
after the modification will cause a new time window to
De Santi, et al. Standards Track [Page 193]
RFC 5324 MIB for FC-SP September 2008
begin with the new length."
DEFVAL { 300 }
::= { t11FcSpSaControlEntry 8 }
t11FcSpSaControlMaxNotifs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of t11FcSpSaNotifyAuthFailure
notifications to be generated per Fabric within a
t11FcSpSaControlWindow time window. Subsequent
Authentication failures occurring on the same Fabric
in the same time window are counted, but no
t11FcSpSaNotifyAuthFailure notification is generated.
When this object is modified before the end of a time
window, that time window is immediately terminated, i.e.,
the next Authentication failure on the relevant Fabric
after the modification will cause a new time window to
begin with the new length."
DEFVAL { 16 }
::= { t11FcSpSaControlEntry 9 }
t11FcSpSaControlLifeExcdEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether t11FcSpSaNotifyLifeExceeded
notifications should be generated for this Fabric."
DEFVAL { true }
::= { t11FcSpSaControlEntry 10 }
t11FcSpSaControlLifeExcdSpi OBJECT-TYPE
SYNTAX T11FcSpiIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPI of the SA that was most recently terminated
because its lifetime (in seconds or in passed bytes)
was exceeded. Such terminations include those due to
a failed attempt to renew an SA after its lifetime was
exceeded."
::= { t11FcSpSaControlEntry 11 }
t11FcSpSaControlLifeExcdDir OBJECT-TYPE
SYNTAX T11FcSaDirection
De Santi, et al. Standards Track [Page 194]
RFC 5324 MIB for FC-SP September 2008
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The direction of frame transmission on the SA that was
most recently terminated because its lifetime (in seconds
or in passed bytes) was exceeded."
::= { t11FcSpSaControlEntry 12 }
t11FcSpSaControlLifeExcdTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of the most recent termination of an SA
due to its lifetime (in seconds or in passed bytes)
being exceeded. Such terminations include those
due to a failed attempt to renew an SA after its
lifetime was exceeded."
::= { t11FcSpSaControlEntry 13 }
--
-- Notification definitions
--
t11FcSpSaNotifyAuthFailure NOTIFICATION-TYPE
OBJECTS { t11FcSpSaControlInboundSpi,
t11FcSpSaControlSource,
t11FcSpSaControlDestination,
t11FcSpSaControlFrame,
t11FcSpSaControlElapsed,
t11FcSpSaControlSuppressed }
STATUS current
DESCRIPTION
"When this notification is generated, it indicates the
occurrence of an Authentication failure for a received
FC-2 or CT_IU frame. The t11FcSpSaControlInboundSpi,
t11FcSpSaControlSource, and t11FcSpSaControlDestination
objects in the varbindlist are the frame's SPI, source and
destination addresses, respectively. t11FcSpSaControlFrame
provides the (beginning of the) frame's content if such is
available.
This notification is generated only for the first
occurrence of an Authentication failure on a Fabric within
a time window. Subsequent occurrences of an Authentication
Failure on the same Fabric within the same time window
are counted but suppressed.
De Santi, et al. Standards Track [Page 195]
RFC 5324 MIB for FC-SP September 2008
The value of t11FcSpSaControlElapsed contains (a lower bound
on) the elapsed time since the last generation of this
notification for the same Fabric. The value of
t11FcSpSaControlSuppressed contains the number of
generations which were suppressed in the time window after
that last generation, or zero if unknown."
::= { t11FcSpSaMIBNotifications 1 }
t11FcSpSaNotifyLifeExceeded NOTIFICATION-TYPE
OBJECTS { t11FcSpSaControlLifeExcdSpi,
t11FcSpSaControlLifeExcdDir }
STATUS current
DESCRIPTION
"This notification is generated when the lifetime (in
seconds or in passed bytes) of an SA is exceeded, and the
SA is either immediately terminated or is terminated
because an attempt to renew the SA fails. The values of
t11FcSpSaControlLifeExcdSpi and t11FcSpSaControlLifeExcdDir
contain the SPI and direction of the terminated SA."
::= { t11FcSpSaMIBNotifications 2 }
--
-- Conformance
--
t11FcSpSaMIBCompliances
OBJECT IDENTIFIER ::= { t11FcSpSaMIBConformance 1 }
t11FcSpSaMIBGroups OBJECT IDENTIFIER ::= { t11FcSpSaMIBConformance 2 }
t11FcSpSaMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that implement
FC-SP Security Associations."
MODULE -- this module
MANDATORY-GROUPS
{ t11FcSpSaCapabilityGroup,
t11FcSpSaParamStatusGroup,
t11FcSpSaSummaryCountGroup,
t11FcSpSaProposalGroup,
t11FcSpSaDropBypassGroup,
t11FcSpSaActiveGroup,
t11FcSpSaNotifInfoGroup,
t11FcSpSaNotificationGroup
}
-- The following is an auxiliary (listed in an INDEX clause)
De Santi, et al. Standards Track [Page 196]
RFC 5324 MIB for FC-SP September 2008
-- object for which the SMIv2 does not allow an OBJECT clause
-- to be specified, but for which this MIB has the following
-- compliance requirement:
-- OBJECT t11FcSpSaIfIndex
-- DESCRIPTION
-- Compliance requires support for either one of:
-- - individual interfaces using ifIndex values, or
-- - the use of the zero value.
-- Write access is not required for any objects in this MIB module:
OBJECT t11FcSpSaIfStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTransStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaIfReplayPrevention
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaIfReplayWindowSize
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaIfTerminateAllSas
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaPropSecurityProt
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaPropTSelListIndex
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaPropTransListIndex
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaPropAcceptAlgorithm
De Santi, et al. Standards Track [Page 197]
RFC 5324 MIB for FC-SP September 2008
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaPropRowStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropDirection
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropStartSrcAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropEndSrcAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropStartDstAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropEndDstAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropStartRCtl
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropEndRCtl
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropStartType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropEndType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropRowStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTransSecurityProt
De Santi, et al. Standards Track [Page 198]
RFC 5324 MIB for FC-SP September 2008
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTransEncryptAlg
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTransEncryptKeyLen
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTransIntegrityAlg
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTransRowStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByAction
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByStartSrcAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByEndSrcAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByStartDstAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByEndDstAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByStartRCtl
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByEndRCtl
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByStartType
De Santi, et al. Standards Track [Page 199]
RFC 5324 MIB for FC-SP September 2008
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByEndType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByRowStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaPairTerminate
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaControlAuthFailEnable
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaControlWindow
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaControlMaxNotifs
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaControlLifeExcdEnable
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
::= { t11FcSpSaMIBCompliances 1 }
-- Units of Conformance
t11FcSpSaCapabilityGroup OBJECT-GROUP
OBJECTS { t11FcSpSaIfEspHeaderCapab,
t11FcSpSaIfCTAuthCapab,
t11FcSpSaIfIKEv2Capab,
t11FcSpSaIfIkev2AuthCapab
}
STATUS current
DESCRIPTION
"A collection of objects containing information
related to capabilities of FC-SP entities."
::= { t11FcSpSaMIBGroups 1 }
t11FcSpSaParamStatusGroup OBJECT-GROUP
De Santi, et al. Standards Track [Page 200]
RFC 5324 MIB for FC-SP September 2008
OBJECTS { t11FcSpSaIfStorageType,
t11FcSpSaIfReplayPrevention,
t11FcSpSaIfReplayWindowSize,
t11FcSpSaIfDeadPeerDetections,
t11FcSpSaIfTerminateAllSas
}
STATUS current
DESCRIPTION
"A collection of objects containing parameters
and status information related to FC-SP entities."
::= { t11FcSpSaMIBGroups 2 }
t11FcSpSaSummaryCountGroup OBJECT-GROUP
OBJECTS { t11FcSpSaIfOutDrops,
t11FcSpSaIfOutBypasses,
t11FcSpSaIfOutProcesses,
t11FcSpSaIfOutUnMatcheds,
t11FcSpSaIfInUnprotUnmtchDrops,
t11FcSpSaIfInDetReplays,
t11FcSpSaIfInUnprotMtchDrops,
t11FcSpSaIfInBadXforms,
t11FcSpSaIfInGoodXforms,
t11FcSpSaIfInProtUnmtchs
}
STATUS current
DESCRIPTION
"A collection of objects containing summary
counters for FC-SP Security Associations."
::= { t11FcSpSaMIBGroups 3 }
t11FcSpSaProposalGroup OBJECT-GROUP
OBJECTS { t11FcSpSaPropSecurityProt,
t11FcSpSaPropTSelListIndex,
t11FcSpSaPropTransListIndex,
t11FcSpSaPropAcceptAlgorithm,
t11FcSpSaPropOutMatchSucceeds,
t11FcSpSaPropRowStatus,
t11FcSpSaTSelPropDirection,
t11FcSpSaTSelPropStartSrcAddr,
t11FcSpSaTSelPropEndSrcAddr,
t11FcSpSaTSelPropStartDstAddr,
t11FcSpSaTSelPropEndDstAddr,
t11FcSpSaTSelPropStartRCtl,
t11FcSpSaTSelPropEndRCtl,
t11FcSpSaTSelPropStartType,
t11FcSpSaTSelPropEndType,
t11FcSpSaTSelPropStorageType,
t11FcSpSaTSelPropRowStatus
De Santi, et al. Standards Track [Page 201]
RFC 5324 MIB for FC-SP September 2008
}
STATUS current
DESCRIPTION
"A collection of objects containing information
related to making and accepting proposals for
FC-SP Security Associations."
::= { t11FcSpSaMIBGroups 4 }
t11FcSpSaDropBypassGroup OBJECT-GROUP
OBJECTS { t11FcSpSaTSelDrByAction,
t11FcSpSaTSelDrByStartSrcAddr,
t11FcSpSaTSelDrByEndSrcAddr,
t11FcSpSaTSelDrByStartDstAddr,
t11FcSpSaTSelDrByEndDstAddr,
t11FcSpSaTSelDrByStartRCtl,
t11FcSpSaTSelDrByEndRCtl,
t11FcSpSaTSelDrByStartType,
t11FcSpSaTSelDrByEndType,
t11FcSpSaTSelDrByMatches,
t11FcSpSaTSelDrByRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects containing information
about Traffic Selectors of traffic to drop or bypass
for FC-SP Security."
::= { t11FcSpSaMIBGroups 5 }
t11FcSpSaActiveGroup OBJECT-GROUP
OBJECTS { t11FcSpSaPairSecurityProt,
t11FcSpSaPairTransListIndex,
t11FcSpSaPairTransIndex,
t11FcSpSaPairLifetimeLeft,
t11FcSpSaPairLifetimeLeftUnits,
t11FcSpSaPairTerminate,
t11FcSpSaPairInProtUnMatchs,
t11FcSpSaPairInDetReplays,
t11FcSpSaPairInBadXforms,
t11FcSpSaPairInGoodXforms,
t11FcSpSaTransSecurityProt,
t11FcSpSaTransEncryptAlg,
t11FcSpSaTransEncryptKeyLen,
t11FcSpSaTransIntegrityAlg,
t11FcSpSaTransStorageType,
t11FcSpSaTransRowStatus,
t11FcSpSaTSelNegInInboundSpi,
t11FcSpSaTSelNegInStartSrcAddr,
t11FcSpSaTSelNegInEndSrcAddr,
De Santi, et al. Standards Track [Page 202]
RFC 5324 MIB for FC-SP September 2008
t11FcSpSaTSelNegInStartDstAddr,
t11FcSpSaTSelNegInEndDstAddr,
t11FcSpSaTSelNegInStartRCtl,
t11FcSpSaTSelNegInEndRCtl,
t11FcSpSaTSelNegInStartType,
t11FcSpSaTSelNegInEndType,
t11FcSpSaTSelNegInUnpMtchDrops,
t11FcSpSaTSelNegOutInboundSpi,
t11FcSpSaTSelNegOutStartSrcAddr,
t11FcSpSaTSelNegOutEndSrcAddr,
t11FcSpSaTSelNegOutStartDstAddr,
t11FcSpSaTSelNegOutEndDstAddr,
t11FcSpSaTSelNegOutStartRCtl,
t11FcSpSaTSelNegOutEndRCtl,
t11FcSpSaTSelNegOutStartType,
t11FcSpSaTSelNegOutEndType,
t11FcSpSaTSelSpiDirection,
t11FcSpSaTSelSpiTrafSelPtr
}
STATUS current
DESCRIPTION
"A collection of objects containing information related
to currently active FC-SP Security Associations."
::= { t11FcSpSaMIBGroups 6 }
t11FcSpSaNotifInfoGroup OBJECT-GROUP
OBJECTS { t11FcSpSaControlAuthFailEnable,
t11FcSpSaControlInboundSpi,
t11FcSpSaControlSource,
t11FcSpSaControlDestination,
t11FcSpSaControlFrame,
t11FcSpSaControlElapsed,
t11FcSpSaControlSuppressed,
t11FcSpSaControlWindow,
t11FcSpSaControlMaxNotifs,
t11FcSpSaControlLifeExcdEnable,
t11FcSpSaControlLifeExcdSpi,
t11FcSpSaControlLifeExcdDir,
t11FcSpSaControlLifeExcdTime
}
STATUS current
DESCRIPTION
"A collection of objects containing information
related to notifications of events concerning
FC-SP Security Associations."
::= { t11FcSpSaMIBGroups 7 }
De Santi, et al. Standards Track [Page 203]
RFC 5324 MIB for FC-SP September 2008
t11FcSpSaNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { t11FcSpSaNotifyAuthFailure,
t11FcSpSaNotifyLifeExceeded
}
STATUS current
DESCRIPTION
"A collection of notifications of events concerning
FC-SP Security Associations."
::= { t11FcSpSaMIBGroups 8 }
END
7. IANA Considerations
IANA has made one MIB OID assignment, under the appropriate subtree,
for each of the five MIB modules defined in this document.
8. Security Considerations
In this section, the first sub-section explains why this document
does not define MIB objects for particular items of (management)
information. This is followed by one sub-section for each of the MIB
modules defined in section 6, listing their individual Security
Considerations. The section concludes with Security Considerations
common to all of these MIB modules.
The key word "RECOMMENDED" contained in this section is to be
interpreted as described in BCP 14 [RFC2119].
8.1. Information Not Defined in This Document
This document doesn't define any MIB objects for the secrets that
need to be known/determined by FC-SP entities in order to use DH-CHAP
to authenticate each other. Such secrets are "highly sensitive" and
need to be "strong secrets" (e.g., randomly generated and/or from an
external source, see section 5.4.8 of [FC-SP]) rather than just
passwords. Thus, such secrets need to be managed by mechanisms other
than the MIB modules defined here.
8.2. The T11-FC-SP-TC-MIB Module
This MIB module defines some data types and assigns some Object
Identifiers, for use as the syntax and as values of MIB objects,
respectively, but it itself defines no MIB objects. Thus, there is
no direct read or write access via a management protocol, such as
SNMP, to these definitions. Nevertheless, it does include the
assignment of enumerations and OIDs to represent cryptographic
algorithms/transforms, and it is appropriate for such assignments to
De Santi, et al. Standards Track [Page 204]
RFC 5324 MIB for FC-SP September 2008
be augmented with new assignments as and when new
algorithms/transforms are available.
8.3. The T11-FC-SP-AUTHENTICATION-MIB Module
There are several management objects defined in this MIB module with
a MAX-ACCESS clause of read-write. Such objects may be considered
sensitive or vulnerable in some network environments. The support
for SET operations in a non-secure environment without proper
protection can have a negative effect on network operations. These
objects and their sensitivity/vulnerability are:
t11FcSpAuStorageType
- could cause changes in the configuration to be retained or
not retained over restarts, against the wishes of management.
t11FcSpAuSendRejNotifyEnable
t11FcSpAuRcvRejNotifyEnable
- could cause the suppression of SNMP notifications (e.g., of
authentication failures or protocol failures), or the
disruption of network operations due to the generation of
unwanted notifications.
t11FcSpAuDefaultLifetime
t11FcSpAuDefaultLifetimeUnits
- could cause the lifetimes of Security Associations to be
extended longer than might be secure, or shortened to cause
an increase in the overhead of using security.
t11FcSpAuRejectMaxRows
- could cause a smaller audit trail of Authentication rejects,
thereby hiding the tracks of an attacker, or a larger audit
trail of Authentication rejects causing resources to be
wasted.
Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over
the network via SNMP. These are the tables and objects and their
sensitivity/vulnerability:
t11FcSpAuEntityTable
- the capabilities of FC-SP Authentication entities in terms of
what cryptographic algorithms they support, and various
configuration parameters of FC-SP Authentication entities.
De Santi, et al. Standards Track [Page 205]
RFC 5324 MIB for FC-SP September 2008
t11FcSpAuIfStatTable
- the mapping of which FC-SP Authentication entities operate on
which interfaces.
t11FcSpAuRejectTable
- an audit trail of authentication failures and other
Authentication Protocol failures.
8.4. The T11-FC-SP-ZONING-MIB Module
There are several management objects defined in this MIB module with
a MAX-ACCESS clause of read-write and/or read-create. Such objects
may be considered sensitive or vulnerable in some network
environments. The support for SET operations in a non-secure
environment without proper protection can have a negative effect on
network operations. These objects and their
sensitivity/vulnerability are:
t11FcSpZsServerEnabled
- could cause FC-SP Zoning mode to be enabled or not enabled,
against the wishes of management.
t11FcSpZoneSetHashStatus
- could cause an FC-SP implementation to recalculate the values
of the Active Zone Set Hash and the Zone Set Database Hash
more frequently than is required by management.
t11FcSpZsNotifyJoinSuccessEnable
t11FcSpZsNotifyJoinFailureEnable
- could cause the suppression of SNMP notifications that a
Switch in one Fabric has successfully joined/failed to join
with a Switch in another Fabric, or the disruption of network
operations due to the generation of unwanted notifications.
Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over
the network via SNMP. These are the objects and their
sensitivity/vulnerability:
t11FcSpZsServerCapabilityObject
t11FcSpZsServerEnabled
- the FC-SP Zoning capabilities and status of the FC-SP
implementation.
De Santi, et al. Standards Track [Page 206]
RFC 5324 MIB for FC-SP September 2008
t11FcSpZoneSetHashStatus
t11FcSpActiveZoneSetHashType
t11FcSpActiveZoneSetHash
t11FcSpZoneSetDatabaseHashType
t11FcSpZoneSetDatabaseHash
- the current values of the Active Zone Set Hash and the Zone
Set Database Hash.
8.5. The T11-FC-SP-POLICY-MIB Module
There are many management objects defined in this MIB module with a
MAX-ACCESS clause of read-write and/or read-create. Such objects may
be considered sensitive or vulnerable in some network environments.
The support for SET operations in a non-secure environment without
proper protection can have a negative effect on network operations.
The objects and tables and their sensitivity/vulnerability are:
t11FcSpPoNaSummaryTable
t11FcSpPoNaSwListTable
t11FcSpPoNaSwMembTable
t11FcSpPoNaNoMembTable
t11FcSpPoNaCtDescrTable
t11FcSpPoNaSwConnTable
t11FcSpPoNaIpMgmtTable
- could change the currently inactive FC-SP Fabric Policies, so
as to allow unauthorized connectivity of Switches and/or
Nodes to the network, or between Switches in the network, or,
to prohibit such connectivity even when authorized.
t11FcSpPoNaIpMgmtTable
t11FcSpPoNaWkpDescrTable
- could change the currently inactive FC-SP Fabric Policies, so
as to allow unauthorized management access to Switches, or
prohibit authorized management access to Switches.
t11FcSpPoNaSummaryTable
t11FcSpPoNaSwMembTable
t11FcSpPoNaNoMembTable
t11FcSpPoNaAttribTable
t11FcSpPoNaAuthProtTable
- could change the currently inactive FC-SP Fabric Policies, so
as to allow Security Associations with reduced security or
require Security Associations that are unnecessarily secure.
De Santi, et al. Standards Track [Page 207]
RFC 5324 MIB for FC-SP September 2008
t11FcSpPoOperActivate
t11FcSpPoOperDeActivate
- could cause the currently active FC-SP Fabric Policies to be
de-activated and currently inactive FC-SP Fabric Policies
(e.g., those modified as above) to be activated instead.
t11FcSpPoStorageType
- could cause changes in the configuration and/or in FC-SP
Fabric Policies to be retained or not retained over restarts,
against the wishes of management.
t11FcSpPoNotificationEnable
- could cause the suppression of SNMP notifications on the
successful/unsuccessful activation/deactivation of Fabric
Policies, and thereby hide successful/failed attempts to make
unauthorized changes, or cause the disruption of network
operations due to the generation of unwanted notifications.
Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over
the network via SNMP. These are the tables and their
sensitivity/vulnerability:
t11FcSpPoTable
t11FcSpPoSummaryTable
t11FcSpPoSwMembTable
t11FcSpPoNoMembTable
t11FcSpPoCtDescrTable
t11FcSpPoSwConnTable
t11FcSpPoIpMgmtTable
t11FcSpPoWkpDescrTable
t11FcSpPoAttribTable
t11FcSpPoAuthProtTable
- the currently active FC-SP Fabric Policies that can be
examined by an attacker looking for possible security
vulnerabilities in the active policies.
De Santi, et al. Standards Track [Page 208]
RFC 5324 MIB for FC-SP September 2008
8.6. The T11-FC-SP-SA-MIB Module
There are several management objects defined in this MIB module with
a MAX-ACCESS clause of read-write and/or read-create. Such objects
may be considered sensitive or vulnerable in some network
environments. The support for SET operations in a non-secure
environment without proper protection can have a negative effect on
network operations. These objects and their
sensitivity/vulnerability are:
t11FcSpSaIfStorageType
t11FcSpSaTSelPropStorageType
t11FcSpSaTransStorageType
- could cause changes in configuration information related to
FC-SP Security Associations to be retained or not retained
over restarts, against the wishes of management.
t11FcSpSaIfReplayPrevention
t11FcSpSaIfReplayWindowSize
- could cause changes in the operation of anti-replay
protection, thereby permitting an attacker to conduct replay
attacks, or requiring FC-SP implementations to engage in
unnecessary protection against replay.
t11FcSpSaIfTerminateAllSas
t11FcSpSaPairTerminate
- could cause FC-SP Security Associations to be aborted
unnecessarily.
t11FcSpSaControlAuthFailEnable
- could cause the suppression of SNMP notifications on the
occurrence of Authentication failures for received FC-2 or
CT_IU frames, thereby hiding attempts to subvert security
measures, or cause the disruption of network operations due
to the generation of unwanted notifications.
t11FcSpSaControlLifeExcdEnable
- could cause the suppression of SNMP notifications on the
occurrence of an FC-SP Security Association exceeding its
lifetime, thereby possibly causing disruption to network
usage due to a delay in determining the problem and/or re-
establishing the Security Association.
De Santi, et al. Standards Track [Page 209]
RFC 5324 MIB for FC-SP September 2008
t11FcSpSaControlWindow
- could cause the suppression of second and subsequent SNMP
notifications on the occurrence of Authentication failures
for received FC-2 or CT_IU frames, thereby masking repeated
attempts to subvert security measures, or cause the
disruption of network operations due to the generation of
unwanted notifications.
t11FcSpSaControlMaxNotifs
- could cause the suppression of all SNMP notifications on the
occurrence of Authentication failures for received FC-2 or
CT_IU frames, thereby masking attempts to subvert security
measures, or cause the disruption of network operations due
to the generation of unwanted notifications.
t11FcSpSaPropTable
t11FcSpSaTSelPropTable
t11FcSpSaTransTable
- could cause an FC-SP entity to propose the setup of Security
Associations that apply to a different selection of traffic
and/or using different security transforms, such that some
traffic has a reduced level of security that might improve an
attacker's chance of subverting security, or an increased
level of security that would involve unnecessary security
processing, or cause the negotiation of Security Associations
to fail to find commonly acceptable parameters such that no
Security Associations can be established.
t11FcSpSaTSelDrByTable
- could cause an FC-SP entity to select different sets of
traffic which are: a) to be sent/received without being
protected by FC-SP security, thereby providing an attacker
with access to read authentic traffic or the ability to
introduce unauthentic traffic; or b) to be dropped instead of
being sent/after being received, thereby causing disruption
to network usage.
Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over
the network via SNMP. These are the tables and objects and their
sensitivity/vulnerability:
De Santi, et al. Standards Track [Page 210]
RFC 5324 MIB for FC-SP September 2008
t11FcSpSaIfTable
- information concerning the capabilities, parameters and
status of an FC-SP entity's support for Security
Associations.
t11FcSpSaPropTable
t11FcSpSaTSelPropTable
t11FcSpSaTransTable
- information on the proposals that will be used by an FC-SP
entity to negotiate Security Associations.
t11FcSpSaTSelDrByTable
- information on which subsets of traffic an FC-SP entity will
send or receive without being protected by FC-SP security, or
will drop before sending/after receiving.
t11FcSpSaPairTable
t11FcSpSaTSelNegInTable
t11FcSpSaTSelNegOutTable
t11FcSpSaTSelSpiTable
- information on which Security Associations are currently
active, what subsets of traffic they are carrying, and what
security protection is being given to them.
8.7. Recommendations Common to All MIB Modules
SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPsec),
even then, there is no control as to who on the secure network is
allowed to access and GET/SET (read/change/create/delete) the objects
in this MIB module.
It is RECOMMENDED that implementors consider the security features as
provided by the SNMPv3 framework (see [RFC3410], section 8),
including full support for the SNMPv3 cryptographic mechanisms (for
authentication and privacy).
Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them.
Because the two algorithms currently specified for
T11FcSpPolicyHashFormat are SHA-1 and SHA-256, the definition of
T11FcSpHashCalculationStatus expresses a concern in regard to not
De Santi, et al. Standards Track [Page 211]
RFC 5324 MIB for FC-SP September 2008
incrementally recomputing the hashes after each change when a series
of multiple related changes are being made. This method of reducing
computation is intended as a responsiveness measure (i.e.,
cooperating SNMP managers and agents can get things done faster), not
as a Denial-of-Service (DoS) countermeasure. Nevertheless,
implementations should also consider the DoS possibilities in these
scenarios; potential countermeasures include: requiring
authentication for SETs and the rate-limiting of SET operations if
they can cause significant computation.
9. Normative References
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Structure of Management
Information Version 2 (SMIv2)", STD 58, RFC 2578, April
1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Textual Conventions for
SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Conformance Statements for
SMIv2", STD 58, RFC 2580, April 1999.
[RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group
MIB", RFC 2863, June 2000.
[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An
Architecture for Describing Simple Network Management
Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
December 2002.
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
Schoenwaelder, "Textual Conventions for Internet Network
Addresses", RFC 4001, February 2005.
[RFC4044] McCloghrie, K., "Fibre Channel Management MIB", RFC 4044,
May 2005.
[RFC4303] Kent, S., "IP Encapsulating Security Payload (ESP)", RFC
4303, December 2005.
[RFC4306] Kaufman, C., Ed., "Internet Key Exchange (IKEv2)
Protocol", RFC 4306, December 2005.
De Santi, et al. Standards Track [Page 212]
RFC 5324 MIB for FC-SP September 2008
[RFC4438] DeSanti, C., Gaonkar, V., Vivek, H., McCloghrie, K., and
S. Gai, "Fibre-Channel Name Server MIB", RFC 4438, April
2006.
[RFC4439] DeSanti, C., Gaonkar, V., McCloghrie, K., and S. Gai,
"Fibre Channel Fabric Address Manager MIB", RFC 4439,
March 2006.
[RFC4936] DeSanti, C., Vivek, H., McCloghrie, K., and S. Gai, "Fibre
Channel Zone Server MIB", RFC 4936, August 2007.
[FC-FS-2] "Fibre Channel - Framing and Signaling-2 (FC-FS-2)",
ANSI INCITS 424-2007, February 2007.
[FC-GS-5] "Fibre Channel - Generic Services-5 (FC-GS-5)",
ANSI INCITS 427-2006, December 2006.
[FC-SP] "Fibre Channel - Security Protocols (FC-SP)",
ANSI INCITS 426-2007, T11/Project 1570-D, February 2007.
[FC-SW-4] "Fibre Channel - Switch Fabric-4 (FC-SW-4)",
ANSI INCITS 418-2006, April 2006.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
10. Informative References
[RFC1492] Finseth, C., "An Access Control Protocol, Sometimes Called
TACACS", RFC 1492, July 1993.
[RFC2741] Daniele, M., Wijnen, B., Ellison, M., and D. Francisco,
"Agent Extensibility (AgentX) Protocol Version 1", RFC
2741, January 2000.
[RFC2837] Teow, K., "Definitions of Managed Objects for the Fabric
Element in Fibre Channel Standard", RFC 2837, May 2000.
[RFC2865] Rigney, C., Willens, S., Rubens, A., and W. Simpson,
"Remote Authentication Dial In User Service (RADIUS)", RFC
2865, June 2000.
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002.
[RFC3588] Calhoun, P., Loughney, J., Guttman, E., Zorn, G., and J.
Arkko, "Diameter Base Protocol", RFC 3588, September 2003.
De Santi, et al. Standards Track [Page 213]
RFC 5324 MIB for FC-SP September 2008
[RFC4595] Maino, F. and D. Black, "Use of IKEv2 in the Fibre Channel
Security Association Management Protocol", RFC 4595, July
2006.
[RFC4625] DeSanti, C., McCloghrie, K., Kode, S., and S. Gai, "Fibre
Channel Routing Information MIB", RFC 4625, September
2006.
[RFC4626] DeSanti, C., Gaonkar, V., McCloghrie, K., and S. Gai, "MIB
for Fibre Channel's Fabric Shortest Path First (FSPF)
Protocol", RFC 4626, September 2006.
[RFC4668] Nelson, D., "RADIUS Authentication Client MIB for IPv6",
RFC 4668, August 2006.
[RFC4747] Kipp, S., Ramkumar, G., and K. McCloghrie, "The Virtual
Fabrics MIB", RFC 4747, November 2006.
[RFC4935] DeSanti, C., Vivek, H., McCloghrie, K., and S. Gai, "Fibre
Channel Fabric Configuration Server MIB", RFC 4935, August
2007.
[RFC4983] DeSanti, C., Vivek, H., McCloghrie, K., and S. Gai, "Fibre
Channel Registered State Change Notification (RSCN) MIB",
RFC 4983, August 2007.
De Santi, et al. Standards Track [Page 214]
RFC 5324 MIB for FC-SP September 2008
11. Acknowledgements
This document was initially developed and approved by the INCITS Task
Group T11.5 (http://www.t11.org) as the SM-FSM project. We wish to
acknowledge the contributions and comments from the INCITS Technical
Committee T11, including the following:
T11 Chair: Robert Snively, Brocade
T11 Vice Chair: Claudio DeSanti, Cisco Systems
T11.5 Chair: Roger Cummings, Symantec
T11.5 members:
David Black, EMC
Don Fraser, HP
Larry Hofer, Brocade
Scott Kipp, Brocade
Ralph Weber, ENDL
The document was subsequently a work item of the IMSS Working Group
(of the IETF), chaired by David Black (EMC Corporation). Bert Wijnen
(Alcatel-Lucent) deserves many thanks for his thorough review of all
five MIB modules in this (large!) document. We also wish to
acknowledge Dan Romascanu (Avaya), the IETF Area Director, for his
comments and assistance.
Authors' Addresses
Claudio DeSanti
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
Phone: +1 408 853-9172
EMail: cds@cisco.com
Fabio Maino
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
Phone: +1 408 853-7530
EMail: fmaino@cisco.com
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA USA 95134
Phone: +1 408-526-5260
EMail: kzm@cisco.com
De Santi, et al. Standards Track [Page 215]
RFC 5324 MIB for FC-SP September 2008
Full Copyright Statement
Copyright (C) The IETF Trust (2008).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
De Santi, et al. Standards Track [Page 216]