💾 Archived View for gmi.noulin.net › rfc › rfc7960.gmi captured on 2022-04-29 at 02:58:13. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2022-01-08)
-=-=-=-=-=-=-
Keywords: DMARC, SMTP, DKIM, SPF
Internet Engineering Task Force (IETF) F. Martin, Ed.
Request for Comments: 7960 LinkedIn
Category: Informational E. Lear, Ed.
ISSN: 2070-1721 Cisco Systems GmbH
T. Draegen, Ed.
dmarcian, inc.
E. Zwicky, Ed.
Yahoo
K. Andersen, Ed.
LinkedIn
September 2016
Interoperability Issues between Domain-based Message Authentication,
Reporting, and Conformance (DMARC) and Indirect Email Flows
Abstract
Domain-based Message Authentication, Reporting, and Conformance
(DMARC) introduces a mechanism for expressing domain-level policies
and preferences for email message validation, disposition, and
reporting. However, the DMARC mechanism enables potentially
disruptive interoperability issues when messages do not flow directly
from the author's administrative domain to the final Recipients.
Collectively, these email flows are referred to as "indirect email
flows". This document describes these interoperability issues and
presents possible methods for addressing them.
Status of This Memo
This document is not an Internet Standards Track specification; it is
published for informational purposes.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Not all documents
approved by the IESG are a candidate for any level of Internet
Standard; see Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc7960.
Martin, et al. Informational [Page 1]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
Copyright Notice
Copyright (c) 2016 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction ....................................................3
1.1. Document Conventions .......................................4
2. Causes of Interoperability Issues ...............................4
2.1. Identifier Alignment .......................................4
2.1.1. DKIM Identifier(s) ..................................5
2.1.2. SPF Identifier(s) ...................................6
2.1.3. Multiple RFC5322.From Addresses .....................6
2.2. Message Forwarding .........................................6
2.3. Message Modification .......................................7
3. Internet Mail Architecture, DMARC, and Indirect Email Flows .....8
3.1. Message Handling System ....................................8
3.1.1. Message Submission Agents ...........................8
3.1.2. Message Transfer Agents .............................9
3.1.2.1. Message Encoding ...........................9
3.1.2.2. Header Standardization ....................10
3.1.2.3. Content Validation ........................10
3.1.3. Message Delivery Agents ............................10
3.2. Mediators .................................................11
3.2.1. Alias ..............................................11
3.2.2. ReSenders ..........................................12
3.2.3. Mailing Lists ......................................12
3.2.3.1. Mailing List Operational Effects ..........13
3.2.4. Gateways ...........................................13
3.2.5. Boundary Filters ...................................14
3.3. Combinations ..............................................15
4. Possible Mitigations of Interoperability Issues ................15
4.1. Mitigations in Current Use ................................16
4.1.1. Mitigations for Senders ............................16
4.1.1.1. Identifier Alignment ......................16
4.1.1.2. Message Modification ......................17
4.1.2. Mitigations for Receivers ..........................17
Martin, et al. Informational [Page 2]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
4.1.2.1. Identifier Alignment ......................17
4.1.2.2. Policy Override ...........................17
4.1.3. Mitigations for ReSenders ..........................18
4.1.3.1. Changes to the RFC5322.From ...............18
4.1.3.2. Avoiding Message Modification .............18
4.1.3.3. Mailing Lists .............................18
4.2. Proposed and In-Progress Mitigations ......................20
4.2.1. Getting More Radical: Requiring New
Communication Paths between MUAs ...................21
5. Security Considerations ........................................21
6. References .....................................................22
6.1. Normative References ......................................22
6.2. Informative References ....................................23
Appendix A. Example SPF Bounce ...................................24
A.1. Initial Message ...........................................24
A.2. Notification Message ......................................25
Acknowledgments ...................................................26
Authors' Addresses ................................................27
1. Introduction
DMARC [RFC7489] introduces a mechanism for expressing domain-level
policies and preferences for message validation, disposition, and
reporting. The DMARC mechanism, especially when employed with
restrictive policies, encounters several different types of
interoperability issues due to third-party message sourcing, message
transformation, or rerouting. In particular, DMARC with restrictive
policies causes problems for many Mailing Lists.
At the time of writing this document, the DMARC base specification
has been published as Informational RFC 7489 [RFC7489] and has seen
significant deployment within the email community.
Cases in which email does not flow directly from the author's
administrative domain to the recipient's domain(s) are collectively
referred to in this document as "indirect email flows". Due to
existing and increasing adoption of DMARC, the impact of DMARC-based
email rejection policies on indirect email flows can be significant
for a select subset of general email traffic.
Several known causes of interoperability issues are presented,
followed by a description of components within the Internet Mail
Architecture [RFC5598] where interoperability issues can arise.
Finally, known and possible methods for addressing interoperability
issues are presented. There are often multiple ways to address any
given interoperability issue. While this document strives to be
comprehensive in its review, it should not be treated as complete.
Martin, et al. Informational [Page 3]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
Note that some practices that are in use at the time of this document
may or may not be "best practices", especially as future standards
evolve.
1.1. Document Conventions
The notation used in this document for structured fields is taken
from [RFC5598], Section 1.3.
The term "notification message" ([RFC5321], Section 4.5.5) is used to
refer to a message with a null RFC5321.MailFrom.
The terms "Organizational Domain" and "Authenticated Identifiers" are
specified in DMARC ([RFC7489], Section 3).
All words that begin with capital letters take their formal meanings
from these references.
2. Causes of Interoperability Issues
Interoperability issues between DMARC and indirect email flows arise
when conformance to the DMARC specification leads a receiving
implementation to apply DMARC-based policy restrictions to messages
that are both compliant with the architecture as specified in
[RFC5598] and viewed as legitimate by the intended Recipient.
Note that domains that assert a "p=none" policy and email messages
that pass standard DMARC validation do not have any interoperability
issues.
Email messages that do not conform to IETF email specifications but
are considered legitimate by the intended Recipients are not
discussed in this document.
The rest of this section describes several conceptual causes of
interoperability issues.
2.1. Identifier Alignment
Note to operators and administrators: The identifiers that are used
by the Sender Policy Framework (SPF) are technical components of the
transport process for SMTP. They may or may not, as described below,
bear a meaningful relationship to the content or source of the
message itself. This "relationship by proximity" can be a point of
confusion for non-technical end users, either recipients or senders.
Martin, et al. Informational [Page 4]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
DMARC relies on DomainKeys Identified Mail (DKIM) [RFC6376] and SPF
[RFC7208] to perform message source validation. The DMARC [RFC7489]
specification refers to source domains that are validated by DKIM or
SPF as "Authenticated Identifiers". To be used by DMARC, an
"Authenticated Identifier" must also be related to the domain found
in the message's RFC5322.From header field [RFC5322]. This
relationship between an Authenticated Identifier's domain and the
domain of the RFC5322.From is referred to as "Identifier Alignment".
DMARC allows for Identifier Alignment to be determined in two
different modes: strict and relaxed. Strict mode requires an exact
match between the domain of any of the Authenticated Identifiers and
the message's RFC5322.From header field [RFC5322]. Relaxed mode
allows for Identifier Alignment if Authenticated Identifiers and the
message's RFC5322.From header field [RFC5322] share the same
Organizational Domain. In general, DMARC interoperability issues are
the same for both strict and relaxed alignment, but strict alignment
constrains the possible solutions because of the more rigorous
matching requirement. Some of the mitigations described in this
document only work with the relaxed mode of Identifier Alignment.
2.1.1. DKIM Identifier(s)
DKIM provides a cryptographic means for one or more domain
identifiers to be associated with a particular message. As a
standalone technology, DKIM identifiers are not required to be
related to the source of the message's content. However, for a DKIM
identifier to align in DMARC, the signing domain of a valid signature
must be part of the same Organizational Domain as the domain in the
RFC5322.From header field [RFC5322].
In addition, DKIM allows for the possibility of multiple valid
signatures. These multiple signatures may be from the same or
different domains; there are no restrictions within the DKIM
specification. The DMARC mechanism will process Authenticated
Identifiers that are based on DKIM signatures until an aligned
Authenticated Identifier is found (if any). However, operational
experience has shown that some implementations have difficulty
processing multiple signatures. Implementations that cannot process
multiple DKIM signatures may incorrectly flag messages as "not
passing" (DMARC alignment) and erroneously apply DMARC-based policy
to otherwise conforming messages.
Martin, et al. Informational [Page 5]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
2.1.2. SPF Identifier(s)
The SPF specification [RFC7208] defines two Authenticated Identifiers
for each message. These identifiers derive from:
a. the RFC5321.MailFrom [RFC5321] domain, and
b. the RFC5321.HELO/.EHLO SMTP domain.
In the SPF specification, the RFC7208.MAILFROM [RFC7208] value is
defined to be based on RFC5321.MailFrom unless that value is absent
(as in the case of notification messages), in which case, the second
(RFC5321.HELO/.EHLO) identifier value is used. This "fallback"
definition has occasionally been misunderstood by operators of MTA
systems since notification messages are often an "automatic" feature
of MTA software. Some MTA software does not provide the ability to
apply a DKIM signature to such notification messages.
See Appendix A for an example treatment of this scenario.
For the purposes of DMARC validation/alignment, the hybrid
RFC7208.MAILFROM [RFC7208] identifier's domain is used if and only if
it is aligned with the RFC5322.From [RFC5322] domain. The alignment
of the validated domain is determined based on the DMARC record's
"strict" or "relaxed" designation as described above for the DKIM
identifiers and in [RFC7489].
2.1.3. Multiple RFC5322.From Addresses
[RFC5322] permits only one From header field, but it may contain
multiple mailboxes. Since this is an extremely rare usage, DMARC
specifies that the handling of this situation is implementation
dependent.
Because the presence of multiple domains can be used by an attacker
(an attacker could add their domain to the RFC5322.From field,
provide arbitrary new content, and sign the message), the DMARC
specification recommends that the strictest policy be applied to such
messages (Section 6.6.1 of [RFC7489]).
2.2. Message Forwarding
Section 3 describes forwarding behavior as it relates to the
components of the Internet Mail Architecture.
All forwarding operations involve the retransmission of email. As
discussed above, in order for SPF to yield an Authenticated
Identifier that is pertinent to DMARC, the domain of the
Martin, et al. Informational [Page 6]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
RFC7208.MAILFROM must be in alignment with the RFC5322.From header
field. Forwarding introduces specific issues to the availability of
SPF-based Authenticated Identifiers:
o If the RFC5321.MailFrom is present and the forwarder maintains the
original RFC5321.MailFrom, SPF validation will fail unless the
forwarder is an authorized part of the originator's email sending
infrastructure. If the forwarder replaces the RFC5321.MailFrom
with its own domain, SPF might pass, but Identifier Alignment with
the RFC5322.From header field will fail.
o If the RFC5321.MailFrom is empty (as in the case of Delivery
Status Notifications), the RFC5321.HELO/.EHLO domain of the
forwarder will likely be in a different Organizational Domain than
the original RFC5322.From header field's domain. SPF may pass,
but Identifier Alignment with the RFC5322.From header field will
fail.
In both cases, SPF cannot yield relevant Authenticated Identifiers,
and DKIM must be relied upon to produce results that are relevant to
DMARC.
2.3. Message Modification
Modification of email content invalidates most DKIM signatures, and
many message-forwarding systems modify email content. Mailing List
processors are a common example of such systems, but other forwarding
systems also make modifications.
Although DKIM provides a length flag so that content can be appended
without invalidating the signature, in practice, particularly with
MIME-encoded [RFC2045] messages, a Mailing List processor will do
more than simply append content (see Section 5.3 of [RFC5598] for
details). Furthermore, the length flag is seldom used due to
security issues (see Section 8.2 of [RFC6376] for additional security
considerations). Therefore, this method is only mentioned here for
completeness.
DKIM describes two canonicalizations for use when preparing the
header and body for DKIM processing: simple and relaxed. The latter
is designed to accommodate trivial modifications to whitespace and
folding that, at least in the header case, generally have no semantic
significance. However, the relaxed canonicalization is more
computationally intensive and may not have been preferred in the
early deployment of DKIM, leaving some deployments using the less
forgiving "simple" canonicalization. While the prevalence is
unknown, there are some DKIM verifiers that have problems evaluating
relaxed canonicalization correctly.
Martin, et al. Informational [Page 7]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
3. Internet Mail Architecture, DMARC, and Indirect Email Flows
This section describes components within the Internet Mail
Architecture [RFC5598] where interoperability issues between DMARC
and indirect email flows can be found.
3.1. Message Handling System
Section 4 of [RFC5598] describes six basic components that make up
the Message Handling System (MHS):
o Message
o Message User Agent (MUA)
o Message Submission Agent (MSA)
o Message Transfer Agent (MTA)
o Message Delivery Agent (MDA)
o Message Store (MS)
Of these components, MSA, MTA, and MDA are discussed in relation to
interoperability with DMARC.
Section 5 of [RFC5598] also defines a Mediator as a hybrid of several
component types. A Mediator is given special consideration in this
section due to the unique issues they face when attempting to
interoperate with DMARC.
3.1.1. Message Submission Agents
An MSA accepts messages submitted by a Message User Agent (MUA) and
enforces the policies of the hosting ADministrative Management Domain
(ADMD) and the requirements of Internet standards.
MSAs are split into two sub-components:
o Author-focused MSA functions (aMSA)
o MHS-focused MSA functions (hMSA)
MSA interoperability issues with DMARC begin when an aMSA accepts a
message where the RFC5322.From header field contains a domain that is
outside of the ADMD of the MSA. This situation manifests in one of
several ways, such as when someone uses a mail service with their own
domain but has failed to properly configure an SPF record or when an
Martin, et al. Informational [Page 8]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
MUA attempts to transmit mail as someone else. Examples of the
latter situation include "forward-to-friend" functionality commonly
found on news/article websites or "send-as" functionality present on
some MUAs.
When an hMSA takes responsibility for transit of a message containing
a domain in the RFC5322.From header field that is outside of the
hMSA's ADMD, the hMSA faces DMARC interoperability issues if the
domain publishes a DMARC policy of "quarantine" or "reject". These
issues are marked by the inherent difficulty of establishing
alignment with the domain present in a message's RFC5322.From header
field. Examples of this issue include:
o Partially open relays - a residential ISP that allows its
customers to relay non-local domains through its infrastructure.
o Embedded devices - cable/DSL modems, firewalls, wireless access
points, and printers that send email using hardcoded domains.
o Devices that send mail on behalf of a user - scanners, security
cameras, and alarms that send mail as their owner or a device
user.
o Email service providers - ESPs that service customers who are
using domains that publish a DMARC "reject" policy.
o Calendaring software - an invited member of an event modifies the
event, causing the calendaring software to emit an update that
claims to come from the creator of the event.
3.1.2. Message Transfer Agents
MTAs relay a message until the message reaches a destination MDA.
Some common message-handling strategies break the integrity of DKIM
signatures. A restrictive DMARC policy along with a broken DKIM
signature causes latent interoperability problems to become overt
problems.
3.1.2.1. Message Encoding
An MTA may modify the message encoding, for instance, by converting
8-bit MIME sections to quoted-printable 7-bit sections. This
modification is outside the scope of DKIM canonicalization and will
invalidate DKIM signatures that include message content.
Martin, et al. Informational [Page 9]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
An MTA could also re-encode the message without changing the encoding
type: receiving a MIME-encoded message and producing a semantically
and semiotically equivalent MIME body that is not identical to the
original. This is characteristic of systems that use some other
message representation internally.
3.1.2.2. Header Standardization
An MTA may rewrite headers to bring them into compliance with
existing RFCs. For example, some common MTAs will correct
comprehensible but non-compliant date formats to compliant ones.
Header rewriting is outside the scope of DKIM canonicalization and
will invalidate DKIM signatures. All downstream DMARC processing
with be unable to utilize DKIM to yield Authenticated Identifiers due
to header rewriting.
Providing solutions for issues relating to non-RFC-compliant emails
is outside the scope of this document.
3.1.2.3. Content Validation
An MTA may also implement security-motivated changes to the content
of email messages, dropping or altering sections of messages, causing
breakage of DKIM signatures.
3.1.3. Message Delivery Agents
The MDA transfers a message from the MHS to a mailbox. Like the MSA,
the MDA consists of two sub-components:
o MHS-focused MDA functions (hMDA)
o Recipient-focused MDA functions (rMDA)
Both the hMDA and the rMDA can redirect a message to an alternative
address. DMARC interoperability issues related to redirecting of
messages are described in Section 3.2.
Sieve [RFC5228] functionality often lives in the rMDA sub-component
and can cause DMARC interoperability issues. The Sieve 'addheader'
and 'deleteheader' filtering actions can modify messages and
invalidate DKIM signatures, removing DKIM-supplied Authenticated
Identifiers as inputs to the DMARC mechanism. There are also Sieve
extensions [RFC5703] that modify the body. Sieve alterations may
only become an issue when the email is reintroduced into the
transport infrastructure.
Martin, et al. Informational [Page 10]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
3.2. Mediators
Mediators [RFC5598] forward messages through a re-posting process.
Mediators share some functionality with basic MTA relaying but have
greater flexibility in both addressing and content modifications.
DMARC interoperability issues are common within the context of
Mediators, which are often used precisely for their ability to modify
messages.
The DMARC design does not cope with some Mediator functionality such
as content modifications that invalidate DKIM signatures and
RFC5321.MailFrom rewriting to support SPF authentication of re-sent
mail when the new Recipient receives the message from the Mediator
rather than the initial organization.
3.2.1. Alias
An Alias is a simple re-addressing facility that provides one or more
new Internet Mail addresses, rather than a single, internal one. A
message continues through the transfer service for delivery to one or
more alternative addresses.
Aliases can be implemented by mailbox-level forwarding (e.g., through
"dot-forwarding"), Sieve-level forwarding (through the Sieve
"redirect" action), or other methods. When an Alias preserves
message content and does not make significant header changes, DKIM
signatures may remain valid. However, Aliases often extend the
delivery path outside of the scope covered by the originating ADMD's
SPF record(s).
Examples of Aliasing include:
o Forwarding email between free email (freemail) providers to try
different interfaces while maintaining an original email address;
o Consolidating many email addresses into a single account to
centralize processing; and
o Services that provide "activity-based", "role-based", "vanity", or
"temporary" email addresses such as universities and professional
associations. For instance, professional or alumni institutions
may offer their members an Alias for the duration of their
membership but may not want to deal with the long-term storage of
emails.
Martin, et al. Informational [Page 11]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
In most cases, the aMSA providing Alias services has no
administrative relationship to the ADMD of the originator or the
Final Recipient, so solutions to Alias-related DMARC failure should
not assume such a relationship.
3.2.2. ReSenders
ReSenders "splice" a message's addressing information to connect the
Author of the original message with the Recipient(s) of the new
message. The new Recipient sees the message as being from the
original Author, even if the Mediator adds commentary.
Without Authenticated Identifiers aligned with the Author's
RFC5322.From header field domain, the new Recipient has no way to
achieve a passing DMARC evaluation.
Examples of ReSenders include MUA-level forwarding by resending a
message to a new Recipient or by forwarding a message "inline" to a
new Recipient (this does not include forwarding a message "as an
attachment"). An additional example comes in the form of calendaring
software that allows a meeting attendee (not the meeting organizer)
to modify the content of an invite generating new invitations that
claim to be reissued from the meeting organizer.
3.2.3. Mailing Lists
A Mailing List receives messages as an explicit addressee and then
reposts them to a list of subscribed members. The Mailing List
performs a task that can be viewed as an elaboration of the ReSender
actions.
Mailing Lists share the same DMARC interoperability issues as
ReSenders (Section 3.2.2) and very commonly modify headers or message
content in ways that will cause DKIM to fail, including:
o prepending the RFC5322.Subject header field with a tag, to allow
the Recipient to easily identify the Mailing List within a subject
line listing;
o adding a footer to the email body to contain administrative
instructions;
o removing some MIME-parts from the email or converting the message
to text only;
o encrypting the body with the Recipient's key using PGP (Pretty
Good Privacy) or S/MIME;
Martin, et al. Informational [Page 12]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
o enforcing community standards by rewriting banned words; and
o allowing moderators to add arbitrary commentary to messages
(discussed in [RFC6377]).
Any such modifications would invalidate a DKIM signature.
Header and content modifications are common for many Mailing Lists
and are often central to present Mailing List functionality and
usage. Furthermore, MUAs have come to rely on Mailing List message
modifications to present messages to end users in expected ways.
3.2.3.1. Mailing List Operational Effects
Mailing Lists may also have the following DMARC interoperability
issues:
o Subscribed members may not receive email from members that post
using domains that publish a DMARC "p=reject" policy.
o Mailing Lists may interpret DMARC-related email rejections as an
inability to deliver email to the Recipients that are checking and
enforcing DMARC policy. This processing may cause subscribers
that are checking and enforcing DMARC policy to be inadvertently
suspended or removed from the Mailing List.
3.2.4. Gateways
A Gateway performs the basic routing and transfer work of message
relaying, but it is also permitted to modify content, structure,
addressing, and/or other attributes as needed to send the message
into a messaging environment that operates under different standards
or potentially incompatible policies.
Gateways share the same DMARC interoperability issues as ReSenders
(Section 3.2.2).
Gateways may also share the same DMARC interoperability issues as
MTAs (Section 3.1.2).
Receiver systems on the non-SMTP side of a protocol Gateway may be
unable to evaluate DKIM and SPF. If a message passes through a
second protocol Gateway back into the SMTP domain, the
transformations commonly break the original DKIM signature(s).
Gateway-level forwarding can introduce DMARC interoperability issues
if the Gateway is configured to rewrite the message into alternate
receiving domains. For example, an acquisition may lead an acquiring
Martin, et al. Informational [Page 13]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
company to decide to decommission the acquired company's domains by
rewriting messages to use the domain of the acquiring company. Since
the RFC5322.To header field is usually DKIM-signed, this kind of
rewriting will invalidate such DKIM signatures.
3.2.5. Boundary Filters
To enforce security boundaries, organizations can subject messages to
analysis for conformance with their safety policies. A filter might
alter the content to render it safe, such as by removing or otherwise
altering content deemed unacceptable.
Boundary Filters share the same DMARC interoperability issues as
ReSenders.
Issues may arise with SPF and DKIM evaluation if performed after
filter modifications.
Examples of Boundary Filters include:
o Malware scanning: To protect readers and its reputation, an MTA
that transfers a message may remove content believed to be harmful
from messages, reformulate content to canonical formats in order
to make them more trustworthy or easier to scan, and/or add text
in the body to indicate the message has been scanned. Any such
modifications would invalidate a DKIM signature.
o Spam filtering: To protect its reputation and assist other MTAs,
an MTA may modify a message to indicate its decision that the
message is likely to be unwanted and/or add text in the body to
indicate that such filtering has been done.
o Other text additions: An MTA may add an organizational disclaimer
or advertisement, for instance.
o URL alteration: Some systems will rewrite or alter embedded URLs
as a way to control the potential threat from malware.
o Secondary MX services: The secondary MX for an organization may be
external to the normal mail processing for the organization, and
it may queue and forward to the primary when it becomes available.
This will not invalidate DKIM but will prevent the primary from
validating SPF normally. In this case, however, it is
inappropriate for a primary MX server to perform an SPF check
against its own secondaries. Rather, the secondary MX should
perform this function and employ some trusted mechanism to
communicate the results of the SPF, DKIM, and DMARC evaluation(s)
to the primary MX server.
Martin, et al. Informational [Page 14]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
3.3. Combinations
Indirect email flows can be combined. For example, a university
student may subscribe to a Mailing List (using his university email
address) while this university email address is configured to forward
all emails to a freemail or a post-education corporate account
provider where a more permanent email address for this student
exists.
Within an organization, the message may pass through various MTAs
(Section 3.1.2), each of which performs a different function
(authentication, filtering, distribution, etc.).
4. Possible Mitigations of Interoperability Issues
Solutions to interoperability issues between DMARC and indirect email
flows vary widely in their scope and implications. They range from
improvements to underlying processing, such as proper handling of
multiple DKIM signatures, to more radical changes to the messaging
architecture. This section describes possible ways to address
interoperability issues. Note that these particular mechanisms may
not be considered "best practices" and may, in some cases, violate
various conventions or expectations.
Receivers sometimes need to deliver email messages that do not
conform to any standard or protocol, but are otherwise desired by end
users. Mitigating the impact of DMARC on indirect email flows is
especially important to receivers that operate services where ease of
use and compatibility with existing email flows is a priority.
DMARC provides a mechanism (local policy) for receivers to make
decisions about identity alignment acceptability based on information
outside DMARC and communicate those decisions as "overrides" to the
sender. This facility can be used to ease some interoperability
issues, although care is needed to ensure that this does not create
loopholes for abuse.
To further complicate the usage of mitigations, mitigation may not be
desired if the email in question is of a certain category of high
value or high risk (security-related) transactional messages (dealing
with financial transactions or medical records, for example). In
these cases, mitigating the impact of DMARC due to indirect email
flows may not be desirable (counterproductive or allowing for abuse).
As a final note, mail systems are diverse and widely deployed.
Systems of various ages and capabilities are expected to preserve
interoperability with the rest of the SMTP ecosystem. For instance,
Qmail is still used, although the base code has not been updated
Martin, et al. Informational [Page 15]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
since 1998. ezmlm, a once popular MLM, is still deployed but has not
been updated since 1997, although a new version (ezmlm-idx) exists.
Old versions of other open- and closed-source MTAs are still commonly
in operation. When dealing with aging or unsupported systems, some
solutions may be time-consuming and/or disruptive to implement.
4.1. Mitigations in Current Use
Because DMARC is already widely deployed, many operators already have
mitigations in use. These mitigations vary in their effectiveness
and side effects but have the advantage that they are currently
available.
4.1.1. Mitigations for Senders
4.1.1.1. Identifier Alignment
o MTAs handling multiple domains may choose to change
RFC5321.MailFrom to align with RFC5322.From to improve SPF
usability for DMARC.
o MTAs handling multiple domains may also choose to align
RFC5321.HELO/.EHLO to RFC5322.From, particularly when sending
notification messages. Dynamically adjusting the
RFC5321.HELO/.EHLO based on the RFC5322.From may not be possible
for some MTA software.
o MTAs may choose to DKIM-sign notification messages with an aligned
domain to allow a DKIM-based DMARC pass.
o MTAs sending email on behalf of multiple domains may require
Domain Owners to provide DKIM keys to use DKIM to avoid SPF
validation issues, given the requirement for DMARC alignment with
the RFC5322.From header field. Managing DKIM keys with a third
party has security risks that should be carefully managed (see
also [RFC6376], Section 8). Methods involving CNAMEs and/or
subdomains may alleviate some risks.
o Senders who are sending on behalf of users in other administrative
domains may choose to use an RFC5322.From under the sender's
control. The new From can be either a forwarding address in a
domain controlled by the Sender or a placeholder address, with the
original user's address in an RFC5322.Reply-to header field.
However, performing this modification may cause the Recipient's
MUA to deviate from customary behavior.
Martin, et al. Informational [Page 16]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
o When implementing "forward-to-friend" functionality, one approach
to avoid DMARC failures is to pass a well-formed message to the
user's MUA so that it may fill in an appropriate identity and
submit through its own MSA.
o Senders can use domains with distinct DMARC policies for email
sent directly and email known to use indirect mail flows.
However, for most well-known brands, all active domains are likely
to be targeted equally by abusers.
4.1.1.2. Message Modification
o Senders can maximize survivability of DKIM signatures by limiting
the header fields they sign and using relaxed canonicalization.
Using the DKIM length tag to allow appended signatures is
discouraged due to the security risk created by allowing arbitrary
content to be appended to legitimate email.
o Senders can also maximize survivability by starting with RFC-
compliant headers and common body formats.
o In order to minimize transport-based conversions, Senders can
convert messages to a lowest denominator MIME content-transfer
encoding such as quoted-printable or base64 before signing
([RFC6376], Section 5.3).
4.1.2. Mitigations for Receivers
4.1.2.1. Identifier Alignment
o Receivers should update DKIM handling libraries to ensure that
they process all valid DKIM signatures and check each signature
for alignment.
4.1.2.2. Policy Override
o Receivers can amalgamate data from their user base to create lists
of forwarders and use such lists to inform DMARC local policy
overrides. This process may be easier for large receivers where
data and resources to create such lists are more readily available
than at smaller sites, where there are fewer accounts that receive
forwarded mail and other resources may be scarce.
Martin, et al. Informational [Page 17]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
4.1.3. Mitigations for ReSenders
4.1.3.1. Changes to the RFC5322.From
Many ReSender issues can be avoided by using an RFC5322.From header
field under the ReSender's control, instead of the initial
RFC5322.From. This will correct Identifier Alignment issues and
allow arbitrary message modification as long as the ReSender signs
the message with an aligned domain signature. When ReSenders change
the RFC5322.From, it is desirable to preserve the information about
the original initiator of the message.
A first option is to use the Original-From [RFC5703] (or X-Original-
From) header field for this purpose in various contexts (X- header
field names are discouraged by [RFC6648]). However, handling of
Original-From (or X-Original-From) is not defined anywhere. It is
not currently used consistently or displayed to the user, and in any
situation where it is used, it is a new unauthenticated identifier
available for exploitation unless included within the scope of the
new DKIM signature(s).
Another option for ReSenders is to rewrite the RFC5322.From header
field address to a locally controlled address that will be forwarded
back to the original sender (subject to its own ReSender forwarding
mitigations).
4.1.3.2. Avoiding Message Modification
o Forwarders can choose to add email header fields instead of
modifying existing headers or bodies, for instance, to indicate a
message may be spam.
o Forwarders can minimize the circumstances in which they choose to
fix messages, preferring to preserve non-compliant headers to
creating DKIM failures.
o Forwarders can choose to reject messages with suspect or harmful
content instead of modifying them.
4.1.3.3. Mailing Lists
[RFC6377] provides some guidance on using DKIM with Mailing lists.
The following mitigation techniques can be used to ease
interoperability issues with DMARC and Mailing lists:
o Configuring the Mailing List Manager (MLM) to alter the
RFC5322.From header field to use the domain of the MLM is a
mitigation policy that is now present in several different Mailing
Martin, et al. Informational [Page 18]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
List software distributions. Since most list subscribers prefer
to know the identity of the Author of the original message,
typically this information may be provided in the display name
part of the RFC5322.From header field. This display name needs to
be carefully crafted so as to not collide with the original
display name of the Author, nor contain something that looks like
an email address or domain name. These modifications may to some
extent defeat the purpose of DMARC itself. It may make it
difficult to ensure that users of all email clients can easily
reply to the Author, the list, or all using the email client
features provided for that purpose. Use of the RFC5322.Reply-To
header field can alleviate this problem depending on whether the
Mailing List is configured to reply-to-list, reply-to-author, or
reply-to-fixed-address; however, it is important to note that this
header field can take multiple email addresses. When altering the
RFC5322.From, there are three possibilities:
1. change it to put the Mailing List email address,
2. change it to a locally defined address that will be forwarded
back to the original sender, or
3. "break" the address by modifying the domain to a non-existent
domain (such as by adding a suffix like ".invalid").
The latter modification may create issues because it is an invalid
domain name, and some MTAs may pay particular attention to the
validity of email addresses in RFC5322.From and the reputation of
the domains present there.
o Configuring the MLM to "wrap" the message in a MIME message/rfc822
part and to send as the Mailing List email address. Many email
clients (as of the publication of this document), especially
mobile clients, have difficulty reading such messages, and this is
not expected to change soon.
o Configuring the MLM to not modify the message so that the DKIM
signature remains valid. Some Mailing Lists are set up this way
and require few additional changes to ensure the DKIM signature is
preserved. Moving lists that currently modify mail to a policy
like this may be too much of a change for the members of such
lists.
o Rejecting posts or membership requests from domains with a DMARC
policy other than "p=none". However, members or potential members
of such Mailing Lists may complain of unfair exclusion.
Martin, et al. Informational [Page 19]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
o To alleviate unsubscribes to the Mailing List due to the messages
bouncing because of DMARC, the MLM needs to not act on
notification messages due to message authentication issues.
[RFC3463] specifies Enhanced Mail System Status Codes, which help
differentiate between various failure conditions. Correctly
interpreting Extended SMTP error messages is useful in this case.
In particular, extended status codes for SPF and DKIM causes are
defined in [RFC7372], and DMARC-related failure indications are
discussed in DMARC ([RFC7489], Section 10.3).
All these techniques may provide some specific challenges to MUAs and
different operational usages for end users (like rewriting filters to
sort emails in folders). There will be some time before all
implications are understood and accommodated.
4.2. Proposed and In-Progress Mitigations
The following mitigations are based on Internet-Drafts (I-Ds) that
are still in process. They are described here to offer an
exploratory path for solutions. These solutions should not be used
in a production environment. Because of the transient nature of
I-Ds, specific citations are not included because a number of them
will inevitably become obsolete, and those that gain consensus in the
community will become RFCs and should be discovered as such.
o Third-party authorization schemes provide ways to extend
Identifier Alignment under control of the Domain Owner.
o Ways to canonicalize messages that transit Mailing Lists so that
their alterations can be isolated from the original signed
content.
o Mechanisms to record message transformations applied at each hop
so they can be reversed and the original signed content recovered.
o "Conditional" DKIM signatures, whereby the Author domain indicates
its signature is only good if accompanied by a signature from an
expected downstream relay.
o Mechanisms to extend Authentication-Results [RFC7601] to multiple
hops, creating a provable chain of custody as well as a view of
message authentication results at each handling step.
Martin, et al. Informational [Page 20]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
4.2.1. Getting More Radical: Requiring New Communication Paths between
MUAs
In practice, a number of operators are using strict alignment mode in
DMARC in order to avoid receiving new and innovative forms of
unwanted and unauthentic email through systems purporting to be
Mailing List handlers. The receiving ADMD has no knowledge of which
lists the user has subscribed to and which they have not. One avenue
of exploration would be for the user to authorize Mailing Lists as
proxies for authentication, at which point the receiving ADMD would
be vesting some trust in the Mailing List service. The creators of
DKIM foresaw precisely this possibility at the time by not tightly
binding any semantics to the RFC5322.From header field. Some
experimental work has taken place in this area, as mentioned above.
Additional work might examine a new communication path to the user to
authorize some form of transitive trust.
5. Security Considerations
This document is an analysis of DMARC's impact on indirect email
flows. It describes the possibility of accidental denial of service
that can be created by rejections of messages by DMARC-aware mail
receivers.
Section 4.1.1.1 discusses the importance of appropriate DKIM key
management vis-a-vis third-party email senders.
Section 4.1.3.3 warns that rewriting the RFC5322.From header field to
create an artificial domain name should not be done with any domain.
Martin, et al. Informational [Page 21]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
6. References
6.1. Normative References
[RFC2045] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part One: Format of Internet Message
Bodies", RFC 2045, DOI 10.17487/RFC2045, November 1996,
<http://www.rfc-editor.org/info/rfc2045>.
[RFC3463] Vaudreuil, G., "Enhanced Mail System Status Codes",
RFC 3463, DOI 10.17487/RFC3463, January 2003,
<http://www.rfc-editor.org/info/rfc3463>.
[RFC5228] Guenther, P., Ed. and T. Showalter, Ed., "Sieve: An Email
Filtering Language", RFC 5228, DOI 10.17487/RFC5228,
January 2008, <http://www.rfc-editor.org/info/rfc5228>.
[RFC5321] Klensin, J., "Simple Mail Transfer Protocol", RFC 5321,
DOI 10.17487/RFC5321, October 2008,
<http://www.rfc-editor.org/info/rfc5321>.
[RFC5322] Resnick, P., Ed., "Internet Message Format", RFC 5322,
DOI 10.17487/RFC5322, October 2008,
<http://www.rfc-editor.org/info/rfc5322>.
[RFC5598] Crocker, D., "Internet Mail Architecture", RFC 5598,
DOI 10.17487/RFC5598, July 2009,
<http://www.rfc-editor.org/info/rfc5598>.
[RFC5703] Hansen, T. and C. Daboo, "Sieve Email Filtering: MIME Part
Tests, Iteration, Extraction, Replacement, and Enclosure",
RFC 5703, DOI 10.17487/RFC5703, October 2009,
<http://www.rfc-editor.org/info/rfc5703>.
[RFC6376] Crocker, D., Ed., Hansen, T., Ed., and M. Kucherawy, Ed.,
"DomainKeys Identified Mail (DKIM) Signatures", STD 76,
RFC 6376, DOI 10.17487/RFC6376, September 2011,
<http://www.rfc-editor.org/info/rfc6376>.
[RFC6377] Kucherawy, M., "DomainKeys Identified Mail (DKIM) and
Mailing Lists", BCP 167, RFC 6377, DOI 10.17487/RFC6377,
September 2011, <http://www.rfc-editor.org/info/rfc6377>.
[RFC6648] Saint-Andre, P., Crocker, D., and M. Nottingham,
"Deprecating the "X-" Prefix and Similar Constructs in
Application Protocols", BCP 178, RFC 6648,
DOI 10.17487/RFC6648, June 2012,
<http://www.rfc-editor.org/info/rfc6648>.
Martin, et al. Informational [Page 22]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
[RFC7208] Kitterman, S., "Sender Policy Framework (SPF) for
Authorizing Use of Domains in Email, Version 1", RFC 7208,
DOI 10.17487/RFC7208, April 2014,
<http://www.rfc-editor.org/info/rfc7208>.
[RFC7372] Kucherawy, M., "Email Authentication Status Codes",
RFC 7372, DOI 10.17487/RFC7372, September 2014,
<http://www.rfc-editor.org/info/rfc7372>.
6.2. Informative References
[RFC7489] Kucherawy, M., Ed. and E. Zwicky, Ed., "Domain-based
Message Authentication, Reporting, and Conformance
(DMARC)", RFC 7489, DOI 10.17487/RFC7489, March 2015,
<http://www.rfc-editor.org/info/rfc7489>.
[RFC7601] Kucherawy, M., "Message Header Field for Indicating
Message Authentication Status", RFC 7601,
DOI 10.17487/RFC7601, August 2015,
<http://www.rfc-editor.org/info/rfc7601>.
Martin, et al. Informational [Page 23]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
Appendix A. Example SPF Bounce
This example illustrates a notification message "bounce".
A.1. Initial Message
Here is the message as it exits the Origin MTA (segv.d1.example):
Return-Path: <jqd@d1.example>
Received: from [10.10.10.131] (w-x-y-z.dsl.static.isp.com [w.x.y.z])
(authenticated bits=0)
by segv.d1.example with ESMTP id t0FN4a8O084569;
Thu, 14 Jan 2015 15:00:01 -0800 (PST)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=d1.example;
s=20130426; t=1421363082;
bh=EoJqaaRvhrngQxmQ3VnRIIMRBgecuKf1pdkxtfGyWaU=;
h=Message-ID:Date:From:MIME-Version:To:CC:Subject:Content-Type:
Content-Transfer-Encoding;
b=HxsvPubDE+R96v9dM9Y7V3dJUXvajd6rvF5ec5BPe/vpVBRJnD4I2weEIyYijrvQw
bv9uUA1t94kMN0Q+haFo6hiQPnkuDxku5+oxyZWOqtNH7CTMgcBWWTp4QD4Gd3TRJl
gotsX4RkbNcUhlfnoQ0p+CywWjieI8aR6eof6WDQ=
Message-ID: <54B84785.1060301@d1.example>
Date: Thu, 14 Jan 2015 15:00:01 -0800
From: John Q Doe <jqd@d1.example>
To: no-recipient@dmarc.org
Subject: Example 1
Hey gang,
This is a test message.
--J.
Martin, et al. Informational [Page 24]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
A.2. Notification Message
When dmarc.org rejects the message without a DKIM signature, it
specifies the RFC5321.HELO/.EHLO domain as dmarc.org.local, which has
no SPF record. dmarc.org has a reject policy in place for such non-
passing cases. Since there is no DKIM signature on the notification
message, the failed SPF lookup results in a dmarc=fail, and
d1.example could be expected to discard the notification message
itself:
Return-Path: <>
Received: from dmarc.org.local (mail.dmarc.org. [192.0.2.1])
by mx.d1.example with ESMTPS id Lkm25302jJR5
for <jqd@d1.example>
(version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128);
Thu, 14 Jan 2015 15:00:24 -0800 (PST)
Authentication-Results: mx.d1.example;
spf=none (d1.example: dmarc.org.local does not designate
permitted sender hosts) smtp.mail=;
dmarc=fail (p=REJECT dis=NONE) header.from=dmarc.org
MIME-Version: 1.0
Received: from segv.d1.example (segv.d1.example [198.51.100.1])
by 192.0.2.2 with SMTP id u67mr102828634qge33; Thu,
14 Jan 2015 15:00:24 -0800 (PST)
From: Mail Delivery Subsystem <mailer-daemon@dmarc.org>
To: jqd@d1.example
Subject: Delivery Status Notification (Failure)
Message-ID: <001a11c16e6a9ead220528df294a@dmarc.org>
Date: Thu, 14 Jan 2016 23:00:24 +0000
Content-Type: text/plain; charset=UTF-8
This is an automatically generated Delivery Status Notification
Delivery to the following recipient failed permanently:
no-recipient@dmarc.org
Technical details of permanent failure:
Your message was rejected by the server for the recipient domain
dmarc.org by mail.dmarc.org [192.0.2.1].
The error that the other server returned was:
550 5.1.1 <no-recipient@dmarc.org>... User unknown
----- Original message -----
Return-Path: <jqd@d1.example>
Received: from [203.252.0.131] (131-0-252-203-dsl.static.example.com
[203.252.0.131]) (authenticated bits=0)
Martin, et al. Informational [Page 25]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
by segv.d1.example with ESMTP id t0FN4a8O084569;
Thu, 14 Jan 2015 15:00:01 -0800 (PST)
(envelope-from jqd@d1.example)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=d1.example;
s=20130426; t=1421363082;
bh=EoJqaaRvhrngQxmQ3VnRIIMRBgecuKf1pdkxtfGyWaU=;
h=Message-ID:Date:From:MIME-Version:To:CC:Subject:Content-Type:
Content-Transfer-Encoding;
b=HxsvPubDE+R96v9dM9Y7V3dJUXvajd6rvF5ec5BPe/vpVBRJnD4I2weEIyYijrvQw
bv9uUA1t94kMN0Q+haFo6hiQPnkuDxku5+oxyZWOqtNH7CTMgcBWWTp4QD4Gd3TRJl
gotsX4RkbNcUhlfnoQ0p+CywWjieI8aR6eof6WDQ=
Message-ID: <54B84785.1060301@d1.example>
Date: Thu, 14 Jan 2015 15:00:01 -0800
From: John Q Doe <jqd@d1.example>
To: no-recipient@dmarc.org
Subject: Example 1
Hey gang,
This is a test message.
--J.
Acknowledgments
Miles Fidelman, John Levine, David Crocker, Stephen J. Turnbull, Rolf
E. Sonneveld, Tim Draegen, and Franck Martin contributed to the IETF
DMARC Working Group's wiki page listing all known interoperability
issues with DMARC and indirect email flows.
Tim Draegen created the first draft of this document from these
contributions and by ham-fistedly mapping contributions into the
language of [RFC5598].
Martin, et al. Informational [Page 26]
RFC 7960 DMARC Indirect Email Interop Issues September 2016
Authors' Addresses
Franck Martin (editor)
LinkedIn
Mountain View, CA
United States of America
Email: fmartin@linkedin.com
Eliot Lear (editor)
Cisco Systems GmbH
Richtistrasse 7
Wallisellen, ZH CH-8304
Switzerland
Phone: +41 44 878 9200
Email: lear@cisco.com
Tim Draegen (editor)
dmarcian, inc.
PO Box 1007
Brevard, NC 28712
United States of America
Email: tim@dmarcian.com
Elizabeth Zwicky (editor)
Yahoo
Sunnyvale, CA
United States of America
Email: zwicky@yahoo-inc.com
Kurt Andersen (editor)
LinkedIn
2029 Stierlin Court
Mountain View, CA 94043
United States of America
Email: kandersen@linkedin.com
Martin, et al. Informational [Page 27]