💾 Archived View for drewdevault.com › 2020 › 10 › 18 › New-workstation.gmi captured on 2022-04-29 at 11:27:02. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2020-10-31)
-=-=-=-=-=-=-
After my latest status update, I was asked by a few people to go into some more detail about the nature of my new workstation. I had been using my older workstation for almost 10 years, and I had the following goals for the new one:
I ended up opting for a Mini-ITX build. The main limitation constraining my size choices were the fact that I wanted (1) at least 3 HDDs and one M.2 drive; and (2) an optical drive (I like to rip CDs). The case I picked for this is the Fractal Design Core 500, and I'm pretty pleased with it.
Some parts I already had that went into the build were:
And the following parts I bought new:
The result is a nice, compact build, with a surprising amount of airflow despite the small form-factor. I may replace the cooler with the stock one - it runs a bit hot now - but otherwise I'm satisfied with the hardware side of this build.
I was still running Arch Linux on my old workstation (ugh!) and this was a good chance to upgrade to a nice Alpine Linux install. Getting full disk encryption working correctly was a bit more challenging than on previous attempts with Alpine, but I got it working without too much fuss.
My root filesystem is on the NVMe, encrypted, and I set up a ZFS pool on the other 3 drives for /home and for an archive of important data from my old workstation. I could set this up easily enough, but neither WiFi nor Ethernet were working OOTB. I did most of the setup with a USB-ethernet adapter. Anyway, the necessary drivers had landed in the just-released Linux 5.9, but Alpine's linux-edge package was behind. This is fixed easily enough - I just built the newer kernel - but Alpine doesn't provide a zfs-edge package for this kernel, so I had to build that, too.
So, there you have it. The new box is less than half the size & weight of the old one, catches up to modern hardware quite a bit, and gave me a good chance to re-provision my main workstation's software loadout.
\ \_____ ###[==_____> /_/
“New workstation” was published on October 18, 2020.
The content for this site is CC-BY-SA. The code for this site is MIT.