💾 Archived View for gemini.spam.works › mirrors › textfiles › phreak › CELLULAR › nokiamobira.txt captured on 2022-06-12 at 17:29:43.
-=-=-=-=-=-=-
NOKIA/MOBIRA P4000 & PT612
NOTES: These are dual NAM units.
The ESN prefix is 165 decimal & A5 hex.
Nokia: 813-536-5553
NAM PROGRAMING:
1. Turn power on.
2. Enter * 3 0 0 1 # S S S S S SEL 9 END where SSSSS is the security code
1 2 3 4 5 is the factory default.
3. If the above was successful the phone will display "IdEnt IF InFO Pri"
Skip to step 7 to program NAM 1, or complete steps 4 - 6 to switch to NAM 2.
4. Press SND to toggle to "IdEntif InFO OPT"
5. Press END and the phone will display "OPt InFO diSAbLEd"
6. Press SND and the phone will display "OPt InFO EnAbLEd"
7. Press END, the first data entry will be displayed.
8. SND is used to toggle single digit parameters.
9. Press END to store and increment each step.
10. At any time SEL CLR to exit programing.
PROGRAMING DATA
STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
01 00000 - 32767 HO-Id SYSTEM ID
02 0 OR 1 ACCESS MIN MARK
03 0 OR 1 LOCL OPt LOCAL USE MARK
04 10 DIGITS Phonxx MIN (AREA CODE & TEL#)
05 08 ONLY St CLASS STATION CLASS MARK
06 333 OR 334 PAging Ch INITIAL PAGING CHANNEL
07 2 DIGITS O-LOAd CLASS ACCESS OVERLOAD CLASS
08 A OR B PrEF SyS PREFERRED SYSTEM (SND TOGGLES)
09 2 DIGITS grOUP Id GROUP ID (10 IN USA)
10 5 DIGITS SECUrity SECURITY CODE (LEAVE AT 12345)
11 8 DIGITS SERIAL NUMBER CAN NOT BE CHANGED
12 MM/DD/YY 1 dAtE CAN NOT BE CHANGED
13 MM/DD/YY 2 dAtE INSTALLATION DATE