💾 Archived View for gemini.spam.works › mirrors › textfiles › phreak › CELLULAR › diamond1.nke captured on 2022-06-12 at 17:28:53.
-=-=-=-=-=-=-
-------------------------------------------------------------------------------
DIAMONDTEL (MITSUBISHI) MESA 52 and 55 (Handset Programming)
-------------------------------------------------------------------------------
NAM Type: Tri-State
Manufacturer: Mitsubishi
Programmer: Handset (phone can also be programmed with NAM,
see MESA 40, 50, 52 and 55 programming)
ESN Prefix DEC: 134
Hex: 86
ESN, S/N Match Required: Yes
Available Channels: 666
Programming Sequence: Power On (hold for 1 second)
Depress and hold CLR while keying 1951426 or
8291112 (if phone has been programmed 3
times) must be entered within 10 seconds
Press SEND to enter data and increment
CLR may be used to correct an entry
Write NAM information with END key
Mobile Number: 10 XXX-XXX-XXXX + SEND
Security Code: 3 XXX + SEND
System ID Format: 5 XXXXX + SEND
Local Use Option: 1 1 + SEND
MIN Option: 1 1 + SEND
Initial Paging Channel: 4 0333 or 334 + SEND
Access Overload Class: 2 XX + SEND
Preferred System: 1 0 (B) or 1 (A) + SEND
Group ID Format: 2 XX + SEND
End-to-End Signalling: 1 1 + SEND
Handsfree Option: 1 1 (if equipped) + SEND
Roam Inhibit: 1 0 or 1 + SEND
Aux Option1: 2 00 to 07 + SEND (see bottom)
Aux Option2: 2 00 or 07 + SEND (see bottom)
Aux Option1
Second Non-Resettable Extended DTMF
Handset Cumulative Timer
01 x x
02 x
03 x x
04 x
05 x x
06 x x
07 x x x
Aux Option2
Cumulative Timer
Increment
00 60 seconds
01 30 seconds
02 20 seconds
03 15 seconds
04 12 seconds
05 10 seconds
06 6 seconds
07 1 second
Horn Alert: FCN + 4
New Unlock Code: FCN + 1 + 3-digit security code (current
unlock code will appear) + new 3-digit
unlock code + CLR
System Select: FCN + # + # + #, etc. (the following
will be displayed):
Pref A
Pref B
Only A
Only B
H Only
Press CLR to enter selection and exit.
-------------------------------------------------------------------------------
DIAMONDTEL (MITSUBISHI) MESA 40, 50, 51 and 55 (NAM Program)
-------------------------------------------------------------------------------
NAM Type: Tri-State
Manufacturer: Mitsubishi
Programmer: Motorola 1801 -- Celnam, Curtis, or
Handset (51 and 55 only)
ESN Prefix DEC: 134
HEX: 86
ESN, S/N Match Required: No
Programmable Handset: 52 and 55 only
Available Channels: 666
Phone Number Format: XXX-XXX-XXXX
Lock Code Format: XXX
MIN Option: Enabled
Repertory Option: Enabled
Handsfree Option: Disabled
Local Use Option: Enabled
End-to-End Signalling: Enabled
Horn Alert option: Enabled
System ID Format: XXXXX
Preferred System: A or B
Access Overload Class: XX
Group ID Format: XX
Initial Paging Channel: 333 or 334
Station Class: 00
Horn Alert: FCN + 4
New Unlock Code: FCN + 1 + 3-digit security
code (current Unlock Code will appear)
+ new 3-digit Unlock Code + CLR
System Select: STO + # + # + # etc..
(one of the following will appear)
AAABBB or BBBAAA Standard
BBBAAA or AAABBB Alternate
C50A Home A only
C50B Home B only
AAAAAA A only
BBBBBB B only
Press CLR to enter selection and exit.
-------------------------------------------------------------------------------
DIAMONDTEL MESA 60, 60X and 80X portable
-------------------------------------------------------------------------------
NAM Type: EEPROM
Manufacturer: Mitsubishi
Programmer: Handset
ESN Prefix DEC: 134
HEX: 86
ESN, S/M Match Required: No
Programmable Handset: Yes
Available Channels: 666
Programming Sequence: Power On (END/FCN + 0, simultaneously)
Hold CLR and enter 6926232 (within 10 seconds)
Enter step information then press SND
Press END to write NAM information
Mobile Number: 10 XXX-XXX-XXXX
Security Code: 4 XXXX
System ID Format: 5 XXXXX
Local Use Option: 1 1
MIN Option: 1 1
Initial Paging Channel: 3 333 or 334
Access Overload Class: 2 XX
Preferred System: 1 0 (B) or 1 (A)
Group ID Format: 2 XX
End-to-End Signalling: 1 1
Roam Inhibit: 1 0
A/B Selectable: 1 1
Auto Lock: 1 0
Aux: 1 0
New Unlock Code: FCN + STO + 4-digit security code (NAM)
+ new 3-digit unlock code
System Select: FCN + 1 + X
X=0 AB or BA Standard
X=1 BA or AB Alternate
X=2 Home
X=3 Pref Only
X=4 Non-Pref Only
-------------------------------------------------------------------------------
DIAMONDTEL MESA 90X and 99X portables
-------------------------------------------------------------------------------
NAM Type: EEPROM
Manufacturer: Mitsubishi
Programmer: Handset
ESN Prefix DEC: 134
HEX: 86
ESN, S/N Match Required: No
Programmable Handset: Yes
Programming Sequence: Power On
Depress and hold END while inputting 5132920
or 6972814 (must be input within 10
seconds)
Enter information for each step then press
SEND to increment
Press END to write NAM information
Dual Number: 1 0 (1 number) or 1 (2 numbers) + SEND
Mobile Number: 10 XXX-XXX-XXXX + SEND
System ID Format: 5 XXXXX + SEND
Local Use Option: 1 1 + SEND
MIN Option: 1 1 + SEND
Initial Paging Channel: 4 333 or 334 + SEND
Access Overload Class: 2 XX + SEND
Preferred System: 1 0 (B) or 1 (A) + SEND
Group ID Format: 2 XX + SEND
Roam Inhibit: 1 0 + SEND
VOX (DTX): 1 (0 or 1) + SEND
2 Mobile Number: 10 XXX-XXX-XXXX + SEND
2 System ID Format: 5 XXXXX + SEND
2 Local Use Option: 1 1 + SEND
2 MIN Option: 1 1 + SEND
2 Initial Paging Channel: 4 0333 or 0334 + SEND
2 Access Overload Class: 2 XX + SEND
2 Preferred System: 1 0 (B) or 1 (A) + SEND
2 Group ID Format: 2 XX + SEND
2 Roam Inhibit: 1 (0 or 1) + SEND
2 VOX (DTX): 1 (0 or 1) + SEND
2 Auto Retry: 1 (0 or 1) + SEND
Security Code: 4 XXXX + SEND
End-to-End Signalling: 1 1 + SEND
Continuous DTMF: 1 (0 or 1) + SEND
Auto Lock: 1 (0 or 1) SEND
Booster: 1 0 + SEND
Audible Timer: 1 (0 or 1) + SEND
Press END to exit program mode.
-------------------------------------------------------------------------------
DIAMONDTEL MESA 92 transportable/portable
-------------------------------------------------------------------------------
NAM Type: EEPROM
Manufacturer: Mitsubishi
Programmer: Handset
ESN Prefix DEC: 134
HEX: 86
ESN, S/N Match Required: No
Stamped Model # : 1st 2 digits of serial # are 92
Programmable Handset: Yes
Available Channels: 832
Programming Sequence: Power On
Depress and hold END while inputting 1951426 or
8291112 (if phone has been programmed 3x)
enter within 10 seconds
Enter information for each step then press SEND
to increment
Press END to write NAM information
# of digits
Dual Number: 1 0 (1 number) or 1 (2 numbers) + SEND
Mobile Number: 10 XXX-XXX-XXXX + SEND
System ID Format: 5 XXXXX + SEND
Local Use Option: 1 1 + SEND
MIN Option: 1 1 + SEND
Initial Paging Channel: 4 0333 or 0334 + SEND
Access Overload Class: 2 XX + SEND
Group ID Format: 2 XX + SEND
Timer increment: 1 0 + SEND
(if Dual Number was 0 then skip 2nd programming sequence)
2 Mobile Number: 10 XXX-XXX-XXXX + SEND
2 System ID Format: 5 XXXXX + SEND
2 Local Use Option: 1 1 + SEND
2 MIN Option: 1 1 + SEND
2 Initial Paging Channel: 4 0333 or 0334 + SEND
2 Access Overload Class: 2 XX + SEND
2 Group ID Format: 2 XX + SEND
2 Timer increment: 1 0 + SEND
Security Code: 4 XXXX + SEND
VOX: 1 (0 or 1) + SEND
Roam Inhibit: 1 (0 or 1) + SEND
Continuous Tone: 1 (0 or 1) + SEND
Disable Cumulative: 1 (0 or 1) + SEND
Disable ignition sense: 1 (0 or 1) + SEND
Disable own # display: 1 (0 or 1) + SEND
SID Lockout: 1 (0 or 1) + SEND
Dual Handset: 1 (0 or 1) + SEND
RJ11 Option: 1 (0 or 1) + SEND
Press END to exit Program mode.
New Unlock Code: FCN + 7 + 4-digit security
code (NAM) + new 3-digit unlock code
System Select: FCN + 1 + x
X=0 AB or BA Standard
X=1 BA or AB Alternate
X=2 Home
X=3 Pref only
X=4 Non-Pref only
Press CLR to exit.
-------------------------------------------------------------------------------
DIAMONDTEL MESA 95 transportable
-------------------------------------------------------------------------------
NAM Type: EEPROM
Manufacturer: Mitsubishi
Programmer: Handset
ESN Prefix DEC: 134
HEX: 86
ESN, S/N Match Required: No
Programmable Handset: Yes
Available Channels: 832
Programming Sequence: Power On
Depress and hold END while inputting 1951426 or
8291112 (if phone has been programmed 3x)
Enter information for each step then press SEND
to increment
Press END to write NAM information
# of digits
Dual number: 1 0 (1 number) or 1 (2 numbers) + SEND
Mobile Number: 10 XXX-XXX-XXXX + SEND
System ID Format: 5 XXXXX + SEND
Local Use Option: 1 1 + SEND
MIN Option: 1 1 + SEND
Initial Paging Channel: 4 0333 or 0334 + SEND
Access Overload Class: 2 XX + SEND
Preferred System 1: 1 (0) B or 1 (A) + SEND
Group ID Format: 2 XX + SEND
Timer Increment: 1 0 (0-7) + SEND
(if Dual Number was 0 then skip 2nd NAM programming)
2 Mobile Number: 10 XXX-XXX-XXXX + SEND
2 System ID Format: 5 XXXXX + SEND
2 Local Use Option: 1 1 + SEND
2 MIN Option: 1 1 + SEND
2 Initial Paging Channel: 4 0333 or 0334 + SEND
2 Access Overload Class: 2 XX + SEND
2 Preferred System: 1 0(B) or 1(A) + SEND
2 Group ID Format: 2 XX + SEND
2 Timer increment: 2 0(0-7) + SEND
Security code: 4 XXXX + SEND
End-to-End Signaling: 1 1 + SEND
VOX: 1 0 (0 or 1) + SEND
Handsfree: 1 0 (0 or 1) + SEND
Roam Inhibit: 1 0 (0 or 1) + SEND
Continuous Tone: 1 0 (0 or 1) + SEND
Disable Cumulative: 1 0 (0 or 1) + SEND
Disable Ignition sense: 1 0 (0 or 1) + SEND
Dual Handset: 1 0 (0 or 1) + SEND
New Unlock Code: FCN + 1 + 4-digit security code (NAM)
+ new 3-digit unlock code + CLR
System Select: FCN + # + # (press CLR to select)