💾 Archived View for gmi.noulin.net › rfc › rfc6475.gmi captured on 2022-01-08 at 21:27:53. Gemini links have been rewritten to link to archived content
-=-=-=-=-=-=-
Keywords: [--------]
Internet Engineering Task Force (IETF) G. Keeni
Request for Comments: 6475 Cyber Solutions, Inc.
Category: Standards Track K. Koide
ISSN: 2070-1721 KDDI Corporation
S. Gundavelli
Cisco
R. Wakikawa
Toyota ITC
May 2012
Proxy Mobile IPv6 Management Information Base
Abstract
This memo defines a portion of the Proxy Mobile IPv6 Management
Information Base (MIB) for use with network management protocols in
the Internet community. In particular, the Proxy Mobile IPv6 MIB can
be used to monitor and control the mobile access gateway (MAG) and
the local mobility anchor (LMA) functions of a Proxy Mobile IPv6
(PMIPv6) entity.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc6475.
Keeni, et al. Standards Track [Page 1]
RFC 6475 PMIPV6-MIB May 2012
Copyright Notice
Copyright (c) 2012 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. The Internet-Standard Management Framework ......................3
2. Overview ........................................................3
2.1. The Proxy Mobile IPv6 Protocol Entities ....................3
2.2. Terminology ................................................4
3. Proxy Mobile IPv6 Monitoring and Control Requirements ...........4
4. MIB Design ......................................................4
4.1. Textual Conventions ........................................6
5. MIB Definitions .................................................6
5.1. Proxy Mobile IPv6 Textual Conventions MIB ..................6
5.2. The Proxy Mobile IPv6 MIB .................................10
6. Security Considerations ........................................58
7. IANA Considerations ............................................60
8. References .....................................................60
8.1. Normative References ......................................60
8.2. Informative References ....................................61
9. Acknowledgements ...............................................62
Keeni, et al. Standards Track [Page 2]
RFC 6475 PMIPV6-MIB May 2012
1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580].
2. Overview
2.1. The Proxy Mobile IPv6 Protocol Entities
Proxy Mobile IPv6 (PMIPv6) [RFC5213] is an extension to the Mobile
IPv6 (MIPv6) protocol that facilitates network-based localized
mobility management (NETLMM) for IPv6 nodes in a PMIPv6 domain.
There are three types of entities envisaged by the PMIPv6 protocol.
mobile node (MN): In the PMIPv6 context, this term is used to refer
to an IP host or router whose mobility is managed by the network.
local mobility anchor (LMA): Local Mobility Anchor is the home agent
for the mobile node in a Proxy Mobile IPv6 domain. It is the
topological anchor point for the mobile node's home network
prefix(es) and is the entity that manages the mobile node's binding
state. The local mobility anchor has the functional capabilities of
a home agent as defined in the Mobile IPv6 base specification
[RFC6275] with the additional capabilities required for supporting
the Proxy Mobile IPv6 protocol as defined in the PMIPv6 specification
[RFC5213].
mobile access gateway (MAG): Mobile Access Gateway is the entity on
an access router that manages the mobility-related signaling for a
mobile node that is attached to its access link. It is responsible
for tracking the mobile node's movements to and from the access link
and for signaling the mobile node's local mobility anchor.
This document defines a set of managed objects (MOs) that can be used
to monitor and control PMIPv6 entities.
Keeni, et al. Standards Track [Page 3]
RFC 6475 PMIPV6-MIB May 2012
2.2. Terminology
The terminology used in this document is consistent with the
definitions used in the Mobile IPv6 protocol specification [RFC6275]
and in the NETLMM goals document [RFC4831].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14, RFC 2119 [RFC2119].
3. Proxy Mobile IPv6 Monitoring and Control Requirements
For managing a PMIPv6 entity, it is necessary to monitor the
following:
o capabilities of PMIPv6 entities
o signaling traffic due to PMIPv6 signaling
o binding-related details (at LMA and MAG)
o binding-related statistics (at LMA and MAG)
4. MIB Design
The basic principle has been to keep the MIB as simple as possible
and, at the same time, to make it effective enough so that the
essential needs of monitoring and control are met.
The Proxy Mobile IPv6 Management Information Base (PMIPV6-MIB)
extends the Mobile IPv6 Management Information Base (MIPV6-MIB)
[RFC4295]. It is assumed that PMIPV6-MIB will always be implemented
in conjunction with the MOBILEIPV6-MIB [RFC4295]. The PMIPV6-MIB
uses the textual conventions defined in the INET-ADDRESS-MIB
[RFC4001] and IP-MIB [RFC4293].
The PMIPV6-MIB is composed of the following groups of definitions:
- pmip6Core: a generic group containing objects that are common to
all the Proxy Mobile IPv6 entities. Objects belonging to this
group will be implemented on the corresponding Proxy Mobile IPv6
entity. pmip6BindingCacheTable belongs to this group.
- pmip6Mag: this group models the mobile access gateway service.
Objects belonging to this group have the "pmip6Mag" prefix and
will be implemented on the corresponding MAG.
- pmip6Lma: this group models the local mobility anchor service.
Objects belonging to this group have the "pmip6Lma" prefix and
will be implemented on the corresponding LMA.
Keeni, et al. Standards Track [Page 4]
RFC 6475 PMIPV6-MIB May 2012
- pmip6Notifications: defines the set of notifications that will
be used to asynchronously monitor the Proxy Mobile IPv6
entities.
The tables contained in the above groups are as follows:
- pmip6BindingCacheTable: models the Binding Cache on the local
mobility anchor.
- pmip6MagProxyCOATable: models the Proxy Care-of Addresses
configured on the egress interfaces of the mobile access
gateway.
- pmip6MagMnIdentifierTable: provides a mapping from the MAG-
internal pmip6MagMnIndex to the mobile node identifier.
- pmip6MagMnLLIdentifierTable: provides a mapping from the MAG-
internal pmip6MagMnLLIndex to the corresponding interface of the
mobile node link-layer identifier.
- pmip6MagHomeNetworkPrefixTable: contains the home network
prefixes assigned to interfaces of all mobile nodes attached to
the MAG. Each interface is distinguished by the attached mobile
node identifier (MN-Identifier) and the link-layer identifier
(MN-LL-Identifier).
- pmip6MagBLTable: models the Binding Update List (BL) that
includes PMIPv6-related information and is maintained by the
mobile access gateway.
- pmip6MagMnProfileTable: contains the mobile node's policy
profile that includes the essential operational parameters that
are required by the network entities for managing the mobile
node's mobility service.
- pmip6LmaLMAATable: contains the LMA Addresses (LMAAs) that are
configured on the local mobility anchor. Each LMA Address acts
as a transport endpoint of the tunnel between the local mobility
anchor and the mobile access gateway.
- pmip6LmaMnIdentifierTable: provides a mapping from the LMA-
internal pmip6BindingMnIndex to the mobile node identifier.
- pmip6LmaMnLLIdentifierTable: provides a mapping from the LMA-
internal pmip6BindingMnLLIndex to the corresponding interface of
the mobile node link-layer identifier.
Keeni, et al. Standards Track [Page 5]
RFC 6475 PMIPV6-MIB May 2012
- pmip6LmaHomeNetworkPrefixTable: contains the list of home
network prefixes assigned to the connected interfaces of the
mobile nodes anchored on an LMA.
4.1. Textual Conventions
A Proxy Mobile IPv6 Textual Conventions MIB module containing
Textual Conventions to represent commonly used Proxy Mobile IPv6
management information is defined. The intent is that these
TEXTUAL CONVENTIONS (TCs) will be imported and used in
PMIPv6-related MIB modules that would otherwise define their own
representation(s). This MIB module includes references to RFC
4283 [RFC4283] and RFC 5213 [RFC5213].
5. MIB Definitions
5.1. Proxy Mobile IPv6 Textual Conventions MIB
PMIPV6-TC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, mib-2, Unsigned32
FROM SNMPv2-SMI -- [RFC2578]
TEXTUAL-CONVENTION
FROM SNMPv2-TC; -- [RFC2579]
pmip6TCMIB MODULE-IDENTITY
LAST-UPDATED "201205070000Z" -- 7th May, 2012
ORGANIZATION "IETF NETLMM Working Group"
CONTACT-INFO
" Glenn Mansfield Keeni
Postal: Cyber Solutions, Inc.
6-6-3, Minami Yoshinari
Aoba-ku, Sendai, Japan 989-3204.
Tel: +81-22-303-4012
Fax: +81-22-303-4015
EMail: glenn@cysols.com
Sri Gundavelli
Postal: Cisco Systems
170 W.Tasman Drive,
San Jose, CA 95134
USA
Tel: +1-408-527-6109
EMail: sgundave@cisco.com
Keeni, et al. Standards Track [Page 6]
RFC 6475 PMIPV6-MIB May 2012
Kazuhide Koide
Postal: KDDI Corporation
GARDEN AIR TOWER 3-10-10, Iidabashi
Chiyoda-ku, Tokyo 102-8460, Japan.
Tel: +81-3-6678-3378
EMail: ka-koide@kddi.com
Ryuji Wakikawa
Postal: TOYOTA InfoTechnology Center, U.S.A., Inc.
465 Bernardo Avenue
Mountain View, CA
94043
USA
EMail: ryuji@us.toyota-itc.com
Support Group EMail: netlmm@ietf.org
"
DESCRIPTION
"This MIB module provides textual conventions for
Proxy Mobile IPv6 Management information.
Copyright (c) 2012 IETF Trust and the persons
identified as authors of the code. All rights
reserved.
Redistribution and use in source and binary forms,
with or without modification, is permitted pursuant
to, and subject to the license terms contained in,
the Simplified BSD License set forth in Section 4.c
of the IETF Trust's Legal Provisions Relating to IETF
Documents (http://trustee.ietf.org/license-info).
"
REVISION "201205070000Z" -- 7th May, 2012
DESCRIPTION
"The initial version, published as RFC 6475."
::= { mib-2 205 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
Pmip6TimeStamp64 ::= TEXTUAL-CONVENTION
DISPLAY-HINT "6d:2d"
STATUS current
DESCRIPTION
"A 64-bit unsigned integer field containing a timestamp.
The value indicates the elapsed time since January 1,
1970, 00:00 UTC, by using a fixed-point format. In this
Keeni, et al. Standards Track [Page 7]
RFC 6475 PMIPV6-MIB May 2012
format, the integer number of seconds is contained in
the first 48 bits of the field, and the remaining 16
bits indicate the number of 1/65536 fractions of a
second.
"
REFERENCE
"RFC 5213: Section 8.8"
SYNTAX OCTET STRING (SIZE (8))
Pmip6MnIdentifier ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"The identity of a mobile node in the Proxy Mobile IPv6
domain. This is the stable identifier of a mobile node
that the mobility entities in a Proxy Mobile IPv6 domain
can always acquire and use for predictably identifying
a mobile node. Various forms of identifiers can be used
to identify a mobile node (MN). Two examples are a
Network Access Identifier (NAI) and an opaque
identifier applicable to a particular application.
"
REFERENCE
"RFC 4283: Section 3"
SYNTAX OCTET STRING (SIZE (0..255))
Pmip6MnLLIdentifier ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"An identifier that identifies the attached interface of
a mobile node.
"
REFERENCE
"RFC 5213: Section 8.6"
SYNTAX OCTET STRING (SIZE (0..255))
Pmip6MnIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique integer value, greater than zero, assigned to
each mobile node that is currently attached to the
Proxy Mobile IPv6 domain by the management system.
It is recommended that the values are assigned in a
monotonically increasing order starting from 1. It may
wrap after reaching its maximum value. The value for
each mobile node must remain constant at least from one
re-initialization of the entity's network management
Keeni, et al. Standards Track [Page 8]
RFC 6475 PMIPV6-MIB May 2012
system to the next re-initialization.
"
SYNTAX Unsigned32 (1..4294967295)
Pmip6MnLLIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique integer value, greater than zero, assigned to
each interface of a mobile node that is currently
attached to the Proxy Mobile IPv6 domain by the
management system.
It is recommended that the values are assigned in a
monotonically increasing order starting from 1. It may
wrap after reaching its maximum value. The value for
each interface of a mobile node must remain constant at
least from one re-initialization of the entity's network
management system to the next re-initialization.
"
SYNTAX Unsigned32 (1..4294967295)
Pmip6MnInterfaceATT ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The object specifies the access technology that
connects the mobile node to the access link on the
mobile access gateway.
The enumerated values and the corresponding access
technology are as follows:
reserved (0): Reserved (Not used)
logicalNetworkInterface (1): Logical network interface
pointToPointInterface (2): Point-to-point interface
ethernet (3): Ethernet interface
wirelessLan (4): Wireless LAN interface
wimax (5): Wimax interface
threeGPPGERAN (6): 3GPP GERAN
threeGPPUTRAN (7): 3GPP UTRAN
threeGPPEUTRAN (8): 3GPP E-UTRAN
threeGPP2eHRPD (9): 3GPP2 eHRPD
threeGPP2HRPD (10): 3GPP2 HRPD
threeGPP21xRTT (11): 3GPP2 1xRTT
threeGPP2UMB (12): 3GPP2 UMB
"
REFERENCE
"RFC 5213: Section 8.5,
Mobile IPv6 parameters registry on
http://www.iana.org/mobility-parameters"
SYNTAX INTEGER
{
Keeni, et al. Standards Track [Page 9]
RFC 6475 PMIPV6-MIB May 2012
reserved (0),
logicalNetworkInterface(1),
pointToPointInterface (2),
ethernet (3),
wirelessLan (4),
wimax (5),
threeGPPGERAN (6),
threeGPPUTRAN (7),
threeGPPEUTRAN (8),
threeGPP2eHRPD (9),
threeGPP2HRPD (10),
threeGPP21xRTT (11),
threeGPP2UMB (12)
}
END
5.2. The Proxy Mobile IPv6 MIB
PMIPV6-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, mib-2, Integer32, Counter32, Gauge32,
Unsigned32, OBJECT-TYPE, NOTIFICATION-TYPE
FROM SNMPv2-SMI -- RFC 2578
PhysAddress, TimeStamp,
TruthValue
FROM SNMPv2-TC -- RFC 2579
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC 2580
InetAddressType, InetAddress, InetAddressPrefixLength
FROM INET-ADDRESS-MIB -- RFC 4001
Ipv6AddressIfIdentifierTC
FROM IP-MIB -- RFC 4293
mip6MnBLEntry, mip6BindingCacheEntry
FROM MOBILEIPV6-MIB -- RFC 4295
Pmip6TimeStamp64, Pmip6MnIdentifier,
Pmip6MnLLIdentifier, Pmip6MnIndex, Pmip6MnLLIndex,
Pmip6MnInterfaceATT
FROM PMIPV6-TC-MIB -- RFC 6475
;
pmip6MIB MODULE-IDENTITY
LAST-UPDATED "201205070000Z" -- 7th May, 2012
ORGANIZATION "IETF NETLMM Working Group"
CONTACT-INFO
" Glenn Mansfield Keeni
Postal: Cyber Solutions, Inc.
6-6-3, Minami Yoshinari
Aoba-ku, Sendai 989-3204, Japan.
Keeni, et al. Standards Track [Page 10]
RFC 6475 PMIPV6-MIB May 2012
Tel: +81-22-303-4012
Fax: +81-22-303-4015
EMail: glenn@cysols.com
Kazuhide Koide
Postal: KDDI Corporation
GARDEN AIR TOWER 3-10-10, Iidabashi
Chiyoda-ku, Tokyo 102-8460, Japan.
Tel: +81-3-6678-3378
EMail: ka-koide@kddi.com
Sri Gundavelli
Postal: Cisco
170 W.Tasman Drive,
San Jose, CA 95134
USA
Tel: +1-408-527-6109
EMail: sgundave@cisco.com
Ryuji Wakikawa
Postal: TOYOTA InfoTechnology Center, U.S.A., Inc.
465 Bernardo Avenue
Mountain View, CA
94043
USA
EMail: ryuji@us.toyota-itc.com
Support Group EMail: netlmm@ietf.org"
DESCRIPTION
"The MIB module for monitoring and controlling PMIPv6
entities.
Copyright (c) 2012 IETF Trust and the persons
identified as authors of the code. All rights
reserved.
Redistribution and use in source and binary forms,
with or without modification, is permitted pursuant
to, and subject to the license terms contained in,
the Simplified BSD License set forth in Section 4.c
of the IETF Trust's Legal Provisions Relating to IETF
Documents (http://trustee.ietf.org/license-info).
"
REVISION "201205070000Z" -- 7th May 2012
DESCRIPTION "Initial version, published as RFC 6475."
::= { mib-2 206 }
Keeni, et al. Standards Track [Page 11]
RFC 6475 PMIPV6-MIB May 2012
-- The PMIPv6 MIB has the following 5 primary groups
pmip6Notifications OBJECT IDENTIFIER ::= { pmip6MIB 0 }
pmip6Objects OBJECT IDENTIFIER ::= { pmip6MIB 1 }
pmip6Conformance OBJECT IDENTIFIER ::= { pmip6MIB 2 }
pmip6Core OBJECT IDENTIFIER ::= { pmip6Objects 1 }
pmip6Mag OBJECT IDENTIFIER ::= { pmip6Objects 2 }
pmip6Lma OBJECT IDENTIFIER ::= { pmip6Objects 3 }
-- The sub groups
pmip6System OBJECT IDENTIFIER ::= { pmip6Core 1 }
pmip6Bindings OBJECT IDENTIFIER ::= { pmip6Core 2 }
pmip6Conf OBJECT IDENTIFIER ::= { pmip6Core 3 }
pmip6Stats OBJECT IDENTIFIER ::= { pmip6Core 4 }
pmip6MagSystem OBJECT IDENTIFIER ::= { pmip6Mag 1 }
pmip6MagConf OBJECT IDENTIFIER ::= { pmip6Mag 2 }
pmip6MagRegistration OBJECT IDENTIFIER ::= { pmip6Mag 3 }
pmip6LmaSystem OBJECT IDENTIFIER ::= { pmip6Lma 1 }
pmip6LmaConf OBJECT IDENTIFIER ::= { pmip6Lma 2 }
-- The pmip6Stats group has the following sub groups
pmip6BindingRegCounters OBJECT IDENTIFIER ::= { pmip6Stats 1 }
--
--
-- pmip6System group
--
--
pmip6Capabilities OBJECT-TYPE
SYNTAX BITS {
mobilityAccessGateway (0),
localMobilityAnchor (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the PMIPv6 functions that
are supported by this managed entity. Multiple
Proxy Mobile IPv6 functions may be supported by
a single entity.
mobilityAccessGateway(0) indicates the availability
of the mobility access gateway function.
localMobilityAnchor(1) indicates the availability
of the local mobility anchor function.
Keeni, et al. Standards Track [Page 12]
RFC 6475 PMIPV6-MIB May 2012
"
REFERENCE
"RFC 6275: Sections 3.2, 4.1"
::= { pmip6System 1 }
pmip6MobileNodeGeneratedTimestampInUse OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This flag indicates whether or not the
MN-generated timestamp mechanism is in use in that
Proxy Mobile IPv6 domain.
true(1) indicates that the local mobility anchors and
mobile access gateways in that Proxy Mobile IPv6
domain apply the MN-generated timestamp considerations.
false(0) indicates that the MN-generated timestamp
mechanism is not in use in that Proxy Mobile IPv6
domain.
The default value for this flag is 'false'.
"
REFERENCE
"RFC 5213: Sections 5.5, 9.3"
DEFVAL { false }
::= { pmip6Conf 1 }
pmip6FixedMagLinkLocalAddressOnAllAccessLinksType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The InetAddressType of the
pmip6FixedMagLinkLocalAddressOnAllAccessLinks
that follows.
"
::= { pmip6Conf 2 }
pmip6FixedMagLinkLocalAddressOnAllAccessLinks OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates the link-local address value
that all the mobile access gateways should use on
any of the access links shared with any of the
mobile nodes in that Proxy Mobile IPv6 domain. If
this variable is initialized with all zeroes, it
implies that the use of fixed link-local address mode
is not enabled for that Proxy Mobile IPv6 domain."
Keeni, et al. Standards Track [Page 13]
RFC 6475 PMIPV6-MIB May 2012
REFERENCE
"RFC 5213: Sections 2.2, 6.8, 6.9.1.1, 6.9.3, 9.3"
::= { pmip6Conf 3 }
pmip6FixedMagLinkLayerAddressOnAllAccessLinks OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates the link-layer address value
that all the mobile access gateways should use on
any of the access links shared with any of the mobile
nodes in that Proxy Mobile IPv6 domain. For access
technologies where there is no link-layer address,
this variable MUST be initialized with all zeroes.
"
REFERENCE
"RFC 5213: Sections 6.9.3, 9.3"
::= { pmip6Conf 4 }
pmip6MagStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the PMIPv6 mobile
access gateway function is enabled for the managed
entity.
Changing the status from enabled(1) to disabled(2)
will terminate the PMIPv6 mobile access gateway
function. On the other hand, changing the status
from disabled(2) to enabled(1) will start the PMIPv6
mobile access gateway function.
The value of this object MUST remain unchanged
across reboots of the managed entity.
"
DEFVAL { disabled }
::= { pmip6MagSystem 1 }
pmip6MagProxyCOATable OBJECT-TYPE
SYNTAX SEQUENCE OF Pmip6MagProxyCOAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table models the Proxy Care-of Addresses
configured on the egress interfaces of the mobile access
gateway. This address is the transport endpoint of the
Keeni, et al. Standards Track [Page 14]
RFC 6475 PMIPV6-MIB May 2012
tunnel between the local mobility anchor and the mobile
access gateway.
Entries in this table are not required to survive
a reboot of the managed entity.
"
REFERENCE
"RFC 5213: Sections 2.2, 6.10"
::= { pmip6MagSystem 2 }
pmip6MagProxyCOAEntry OBJECT-TYPE
SYNTAX Pmip6MagProxyCOAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents a conceptual row in the
Proxy-CoA table. It represents a Proxy Care-of
Address on the mobile access gateway.
Implementers need to be aware that if the total
number of octets in pmip6MagProxyCOA
exceeds 113, then OIDs of column
instances in this row will have more than 128
sub-identifiers and cannot be accessed using
SNMPv1, SNMPv2c, or SNMPv3.
"
INDEX { pmip6MagProxyCOAType, pmip6MagProxyCOA }
::= { pmip6MagProxyCOATable 1 }
Pmip6MagProxyCOAEntry ::=
SEQUENCE {
pmip6MagProxyCOAType InetAddressType,
pmip6MagProxyCOA InetAddress,
pmip6MagProxyCOAState INTEGER
}
pmip6MagProxyCOAType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The InetAddressType of the pmip6MagProxyCOA
that follows.
"
::= { pmip6MagProxyCOAEntry 1 }
pmip6MagProxyCOA OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
Keeni, et al. Standards Track [Page 15]
RFC 6475 PMIPV6-MIB May 2012
DESCRIPTION
"The Proxy-CoA configured on the egress interface of the
mobile access gateway.
The type of the address represented by this object
is specified by the corresponding
pmip6MagProxyCOAType object.
"
REFERENCE
"RFC 5213: Sections 2.2, 6.10"
::= { pmip6MagProxyCOAEntry 2 }
pmip6MagProxyCOAState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
activated(2),
tunneled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the state of the Proxy-CoA:
unknown -- The state of the Proxy-CoA
cannot be determined.
activated -- The Proxy-CoA is ready to establish
a tunnel. This state SHOULD be
indicated when the MAG is up but has
no mobile node.
tunneled -- Bidirectional tunnel is established
using the Proxy-CoA.
"
::= { pmip6MagProxyCOAEntry 3 }
pmip6MagEnableMagLocalRouting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This flag indicates whether or not the mobile access
gateway is allowed to enable local routing of the
traffic exchanged between a visiting mobile node and
a correspondent node that is locally connected to one
of the interfaces of the mobile access gateway.
The correspondent node can be another visiting mobile
node as well, or a local fixed node.
true(1) indicates that the mobile access gateway routes
the traffic locally.
false(0) indicates that the mobile access gateway
reverse tunnels all the traffic to the mobile node's
Keeni, et al. Standards Track [Page 16]
RFC 6475 PMIPV6-MIB May 2012
local mobility anchor.
The default value for this flag is 'false'.
"
REFERENCE
"RFC 5213: Section 9.2" DEFVAL { false }
::= { pmip6MagConf 1 }
pmip6MagMnIdentifierTable OBJECT-TYPE
SYNTAX SEQUENCE OF Pmip6MagMnIdentifierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the identifiers of mobile nodes
attached to the MAG.
Entries in this table are not required to survive
a reboot of the managed entity.
"
REFERENCE
"RFC 5213: Sections 2.2, 6.1"
::= { pmip6MagConf 2 }
pmip6MagMnIdentifierEntry OBJECT-TYPE
SYNTAX Pmip6MagMnIdentifierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the mobile node identifier table.
"
INDEX { pmip6MagBLMnIndex
}
::= { pmip6MagMnIdentifierTable 1 }
Pmip6MagMnIdentifierEntry ::=
SEQUENCE {
pmip6MagMnIdentifier Pmip6MnIdentifier
}
pmip6MagMnIdentifier OBJECT-TYPE
SYNTAX Pmip6MnIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identity of a mobile node in the Proxy Mobile IPv6
domain.
"
REFERENCE
"RFC 5213: Sections 2.2, 6.1"
Keeni, et al. Standards Track [Page 17]
RFC 6475 PMIPV6-MIB May 2012
::= { pmip6MagMnIdentifierEntry 1 }
pmip6MagMnLLIdentifierTable OBJECT-TYPE
SYNTAX SEQUENCE OF Pmip6MagMnLLIdentifierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the link-layer identifiers
of the interfaces of the mobile nodes attached
to the MAG.
Entries in this table are not required to survive
a reboot of the managed entity.
"
REFERENCE
"RFC 5213: Sections 2.2, 6.1"
::= { pmip6MagConf 3 }
pmip6MagMnLLIdentifierEntry OBJECT-TYPE
SYNTAX Pmip6MagMnLLIdentifierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the mobile node link-layer identifier
table.
"
INDEX { pmip6MagBLMnIndex, pmip6MagBLMnLLIndex
}
::= { pmip6MagMnLLIdentifierTable 1 }
Pmip6MagMnLLIdentifierEntry ::=
SEQUENCE {
pmip6MagMnLLIdentifier Pmip6MnLLIdentifier
}
pmip6MagMnLLIdentifier OBJECT-TYPE
SYNTAX Pmip6MnLLIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The link-layer identifier of the mobile node's
connected interface on the access link.
"
REFERENCE
"RFC 5213: Sections 2.2, 6.1"
::= { pmip6MagMnLLIdentifierEntry 1 }
pmip6MagHomeNetworkPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF Pmip6MagHomeNetworkPrefixEntry
Keeni, et al. Standards Track [Page 18]
RFC 6475 PMIPV6-MIB May 2012
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table representing the home network prefixes
assigned to the connected interfaces of mobile nodes
attached to the MAG.
"
REFERENCE
"RFC 5213: Sections 2, 6.1, 6.2"
::= { pmip6MagConf 4 }
pmip6MagHomeNetworkPrefixEntry OBJECT-TYPE
SYNTAX Pmip6MagHomeNetworkPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the home network prefixes table.
Implementers need to be aware that if the total
number of octets in pmip6MagHomeNetworkPrefix
exceeds 111, then OIDs of column instances in
this row will have more than 128 sub-identifiers
and cannot be accessed using SNMPv1, SNMPv2c, or
SNMPv3.
"
INDEX { pmip6MagBLMnIndex, pmip6MagBLMnLLIndex,
pmip6MagHomeNetworkPrefixType,
pmip6MagHomeNetworkPrefix }
::= { pmip6MagHomeNetworkPrefixTable 1 }
Pmip6MagHomeNetworkPrefixEntry ::=
SEQUENCE {
pmip6MagHomeNetworkPrefixType InetAddressType,
pmip6MagHomeNetworkPrefix InetAddress,
pmip6MagHomeNetworkPrefixLength InetAddressPrefixLength,
pmip6MagHomeNetworkPrefixLifeTime Unsigned32
}
pmip6MagHomeNetworkPrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The InetAddressType of the pmip6MagHomeNetworkPrefix
that follows.
"
::= { pmip6MagHomeNetworkPrefixEntry 1 }
Keeni, et al. Standards Track [Page 19]
RFC 6475 PMIPV6-MIB May 2012
pmip6MagHomeNetworkPrefix OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mobile network prefix that is delegated to the
mobile node. The type of the address represented by
this object is specified by the corresponding
pmip6MagHomeNetworkPrefixType object.
"
REFERENCE
"RFC 5213: Section 2"
::= { pmip6MagHomeNetworkPrefixEntry 2 }
pmip6MagHomeNetworkPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The prefix length of the home network prefix.
"
::= { pmip6MagHomeNetworkPrefixEntry 3 }
pmip6MagHomeNetworkPrefixLifeTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lifetime parameter (in seconds) that will be
advertised in Router Advertisements by the MAG for
this home network prefix.
"
REFERENCE
"RFC 5213: Sections 6.2, 6.7"
::= { pmip6MagHomeNetworkPrefixEntry 4 }
pmip6MagBLTable OBJECT-TYPE
SYNTAX SEQUENCE OF Pmip6MagBLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table corresponds to the Binding Update List (BL)
that includes PMIPv6-related information and is
maintained by the mobile access gateway.
Entries from the table are deleted as the lifetime of
the binding expires.
"
Keeni, et al. Standards Track [Page 20]
RFC 6475 PMIPV6-MIB May 2012
REFERENCE
"RFC 6275: Sections 4.5, 11.1
RFC 5213: Section 6.1"
::= { pmip6MagRegistration 1 }
pmip6MagBLEntry OBJECT-TYPE
SYNTAX Pmip6MagBLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing additional information from
a Binding Update sent by the mobile access gateway
to the local mobility anchor.
"
AUGMENTS {mip6MnBLEntry}
::= { pmip6MagBLTable 1 }
Pmip6MagBLEntry ::= SEQUENCE {
pmip6MagBLFlag TruthValue,
pmip6MagBLMnIndex Pmip6MnIndex,
pmip6MagBLMnLLIndex Pmip6MnLLIndex,
pmip6MagBLMagLinkLocalAddressType InetAddressType,
pmip6MagBLMagLinkLocalAddress InetAddress,
pmip6MagBLMagIfIdentifierToMn Ipv6AddressIfIdentifierTC,
pmip6MagBLTunnelIfIdentifier Ipv6AddressIfIdentifierTC,
pmip6MagBLMnInterfaceATT Pmip6MnInterfaceATT,
pmip6MagBLTimeRecentlyAccepted Pmip6TimeStamp64
}
pmip6MagBLFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"true(1) indicates that the mobile access gateway sent
the Proxy Binding Update with Proxy Registration Flag
that indicates to the local mobility anchor that the
registration is the Proxy Binding Update and is from a
mobile access gateway.
false(0) implies that the mobile access gateway is
behaving as a simple mobile node.
"
REFERENCE
"RFC 5213: Section 8.1"
::= { pmip6MagBLEntry 1 }
pmip6MagBLMnIndex OBJECT-TYPE
SYNTAX Pmip6MnIndex
MAX-ACCESS read-only
Keeni, et al. Standards Track [Page 21]
RFC 6475 PMIPV6-MIB May 2012
STATUS current
DESCRIPTION
"The index to the identifier of the attached mobile
node in the pmip6MagMnIdentifierTable.
"
REFERENCE
"RFC 5213: Sections 2.2, 6.1, 8.1"
::= { pmip6MagBLEntry 2 }
pmip6MagBLMnLLIndex OBJECT-TYPE
SYNTAX Pmip6MnLLIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index to the link-layer identifier of the mobile
node's connected interface in the
pmip6MagMnLLIdentifierTable.
"
REFERENCE
"RFC 5213: Sections 2.2, 6.1, 8.1"
::= { pmip6MagBLEntry 3 }
pmip6MagBLMagLinkLocalAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The InetAddressType of the pmip6MagBLMagLinkLocalAddress
that follows.
"
::= { pmip6MagBLEntry 4 }
pmip6MagBLMagLinkLocalAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The link-local address of the mobile access gateway on
the access link shared with the mobile node.
This is the address that is present in the Link-local
Address option of the corresponding Proxy Binding Update
message.
"
REFERENCE
"RFC 3963: Sections 4.1, 5.1"
::= { pmip6MagBLEntry 5 }
pmip6MagBLMagIfIdentifierToMn OBJECT-TYPE
Keeni, et al. Standards Track [Page 22]
RFC 6475 PMIPV6-MIB May 2012
SYNTAX Ipv6AddressIfIdentifierTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface identifier (if-id) of the point-to-point
link between the mobile node and the mobile access
gateway. This is internal to the mobile access gateway
and is used to associate the Proxy Mobile IPv6 tunnel
to the access link where the mobile node is attached.
"
REFERENCE
"RFC 5213: Sections 6.1, 8.1"
::= { pmip6MagBLEntry 6 }
pmip6MagBLTunnelIfIdentifier OBJECT-TYPE
SYNTAX Ipv6AddressIfIdentifierTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tunnel interface identifier (tunnel-if-id) of the
bidirectional tunnel between the mobile node's local
mobility anchor and the mobile access gateway. This
is internal to the mobile access gateway. The tunnel
interface identifier is acquired during the tunnel
creation.
"
REFERENCE
"RFC 5213: Sections 6.1, 8.1"
::= { pmip6MagBLEntry 7 }
pmip6MagBLMnInterfaceATT OBJECT-TYPE
SYNTAX Pmip6MnInterfaceATT
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the access technology by which the mobile
node is currently attached to the mobile access gateway.
"
REFERENCE
"RFC 5213: Sections 6.9.1.1, 6.9.1.5, 8.1"
::= { pmip6MagBLEntry 8 }
pmip6MagBLTimeRecentlyAccepted OBJECT-TYPE
SYNTAX Pmip6TimeStamp64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64-bit timestamp value of the most recently
accepted Proxy Binding Update message sent for this
Keeni, et al. Standards Track [Page 23]
RFC 6475 PMIPV6-MIB May 2012
mobile node. This is the time of day on the mobile
access gateway, when the Proxy Binding Acknowledgement
message with the Status field set to 0
was received. If the Timestamp option is not present
in the Proxy Binding Update message (i.e., when the
sequence-number-based scheme is in use), the value MUST
be initialized with all zeroes.
"
REFERENCE
"RFC 5213: Sections 5.1, 8.1"
::= { pmip6MagBLEntry 9 }
pmip6MagMnProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF Pmip6MagMnProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table corresponds to the mobile node's policy
profile that includes the essential operational
parameters that are required by the network entities
for managing the mobile node's mobility service.
It contains policy profiles of mobile nodes that are
connected to the mobile access gateway.
Entries in this table are not required to survive
a reboot of the managed entity.
"
REFERENCE
"RFC 5213: Section 6.2"
::= { pmip6MagRegistration 2 }
pmip6MagMnProfileEntry OBJECT-TYPE
SYNTAX Pmip6MagMnProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about the
mobile node's policy profile.
"
INDEX { pmip6MagProfMnIndex }
::= { pmip6MagMnProfileTable 1 }
Pmip6MagMnProfileEntry ::=
SEQUENCE {
pmip6MagProfMnIndex Pmip6MnIndex,
pmip6MagProfMnIdentifier Pmip6MnIdentifier,
pmip6MagProfMnLocalMobilityAnchorAddressType
InetAddressType,
pmip6MagProfMnLocalMobilityAnchorAddress InetAddress
Keeni, et al. Standards Track [Page 24]
RFC 6475 PMIPV6-MIB May 2012
}
pmip6MagProfMnIndex OBJECT-TYPE
SYNTAX Pmip6MnIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index for a mobile node in the Proxy Mobile IPv6
domain.
"
::= { pmip6MagMnProfileEntry 1 }
pmip6MagProfMnIdentifier OBJECT-TYPE
SYNTAX Pmip6MnIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identity of a mobile node in the Proxy Mobile IPv6
domain.
"
REFERENCE
"RFC 5213: Section 2.2"
::= { pmip6MagMnProfileEntry 2 }
pmip6MagProfMnLocalMobilityAnchorAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The InetAddressType of the
pmip6MagMnLocalMobilityAnchorAddress that follows.
"
::= { pmip6MagMnProfileEntry 3 }
pmip6MagProfMnLocalMobilityAnchorAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global address that is configured on the interface
of the local mobility anchor and is the transport
endpoint of the bidirectional tunnel established
between the local mobility anchor and the mobile access
gateway. This is the address to which the mobile
access gateway sends the Proxy Binding Update messages.
"
REFERENCE
"RFC 5213: Section 2.2"
::= { pmip6MagMnProfileEntry 4 }
Keeni, et al. Standards Track [Page 25]
RFC 6475 PMIPV6-MIB May 2012
pmip6BindingCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF Pmip6BindingCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table models the Binding Cache on the local
mobility anchor.
Entries from the table are deleted as the lifetime
of the binding expires.
Entries in this table are not required to survive
a reboot of the managed entity.
"
REFERENCE
"RFC 6275: Sections 4.5, 9.1, 10.1
RFC 5213: Section 5.1"
::= { pmip6Bindings 1 }
pmip6BindingCacheEntry OBJECT-TYPE
SYNTAX Pmip6BindingCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing additional information contained
in the Binding Cache table of the local mobility anchor.
"
AUGMENTS {mip6BindingCacheEntry}
::= { pmip6BindingCacheTable 1 }
Pmip6BindingCacheEntry ::= SEQUENCE {
pmip6BindingPBUFlag TruthValue,
pmip6BindingMnIndex Pmip6MnIndex,
pmip6BindingMnLLIndex Pmip6MnLLIndex,
pmip6BindingMagLinkLocalAddressType InetAddressType,
pmip6BindingMagLinkLocalAddress InetAddress,
pmip6BindingTunnelIfIdentifier Ipv6AddressIfIdentifierTC,
pmip6BindingMnInterfaceATT
Pmip6MnInterfaceATT,
pmip6BindingTimeRecentlyAccepted Pmip6TimeStamp64
}
pmip6BindingPBUFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"true(1) indicates that the local mobility anchor
Keeni, et al. Standards Track [Page 26]
RFC 6475 PMIPV6-MIB May 2012
accepted the binding update with Proxy Registration
Flag from a mobile access gateway.
false(0) implies that the binding cache is from a
mobile node. In this case, the remaining objects will
not be accessible.
"
REFERENCE
"RFC 5213: Sections 5.1, 8.1"
::= { pmip6BindingCacheEntry 1 }
pmip6BindingMnIndex OBJECT-TYPE
SYNTAX Pmip6MnIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index to the identifier of the registered mobile
node.
"
REFERENCE
"RFC 5213: Sections 2.2, 5.1, 8.1
RFC 4283: Section 3"
::= { pmip6BindingCacheEntry 2 }
pmip6BindingMnLLIndex OBJECT-TYPE
SYNTAX Pmip6MnLLIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index to the link-layer identifier of the mobile
node's connected interface on the access link.
"
REFERENCE
"RFC 5213: Sections 2.2, 5.1, 8.1"
::= { pmip6BindingCacheEntry 3 }
pmip6BindingMagLinkLocalAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The InetAddressType of the
pmip6BindingMagLinkLocalAddress that follows.
"
::= { pmip6BindingCacheEntry 4 }
pmip6BindingMagLinkLocalAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
Keeni, et al. Standards Track [Page 27]
RFC 6475 PMIPV6-MIB May 2012
DESCRIPTION
"The link-local address of the mobile access gateway on
the point-to-point link shared with the mobile node.
This is generated by the local mobility anchor after
accepting the initial Proxy Binding Update message.
This is the address that is present in the Link-local
Address option of the corresponding Proxy Binding
Acknowledgement message.
"
REFERENCE
"RFC 5213: Sections 5.1, 6.9.1.2, 8.2"
::= { pmip6BindingCacheEntry 5 }
pmip6BindingTunnelIfIdentifier OBJECT-TYPE
SYNTAX Ipv6AddressIfIdentifierTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tunnel interface identifier (tunnel-if-id) of the
bidirectional tunnel between the local mobility anchor
and the mobile access gateway where the mobile node is
currently anchored. This is internal to the local
mobility anchor. The tunnel interface identifier is
acquired during the tunnel creation.
"
REFERENCE
"RFC 5213: Sections 5.1, 8.1"
::= { pmip6BindingCacheEntry 6 }
pmip6BindingMnInterfaceATT OBJECT-TYPE
SYNTAX Pmip6MnInterfaceATT
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access technology type by which the mobile node
is currently attached. This is obtained from the
Access Technology Type option, present in the Proxy
Binding Update message.
"
REFERENCE
"RFC 5213: Sections 5.1, 8.1"
::= { pmip6BindingCacheEntry 7 }
pmip6BindingTimeRecentlyAccepted OBJECT-TYPE
SYNTAX Pmip6TimeStamp64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Keeni, et al. Standards Track [Page 28]
RFC 6475 PMIPV6-MIB May 2012
"The 64-bit timestamp value of the most recently
accepted Proxy Binding Update message sent for this
mobile node. This is the time of day on the local
mobility anchor, when the message was received. If
the Timestamp option is not present in the Proxy
Binding Update message (i.e., when the sequence number
based scheme is in use), the value MUST be initialized
with all zeroes.
"
REFERENCE
"RFC 5213: Sections 5.1, 8.1"
::= { pmip6BindingCacheEntry 8 }
---
---
--- pmip6Stats group
---
---
--
-- pmip6Stats:pmip6BindingRegCounters
--
pmip6MissingMnIdentifierOption OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Proxy Binding Update messages
rejected by the local mobility anchor with status
code in the Binding Acknowledgement message indicating
'Missing mobile node identifier option' (Code 160).
Discontinuities in the value of this counter can
occur at re-initialization of the mobile router,
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
REFERENCE
"RFC 5213: Sections 5.3.1, 8.9"
::= { pmip6BindingRegCounters 1 }
pmip6MagNotAuthorizedForProxyReg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Proxy Binding Update messages
Keeni, et al. Standards Track [Page 29]
RFC 6475 PMIPV6-MIB May 2012
rejected by the local mobility anchor with status
code in the Binding Acknowledgement message indicating
'Not authorized to send Proxy Binding Updates'
(Code 154).
Discontinuities in the value of this counter can
occur at re-initialization of the mobile router,
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
REFERENCE
"RFC 5213: Sections 5.3.1, 8.9"
::= { pmip6BindingRegCounters 2 }
pmip6NotLMAForThisMobileNode OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Proxy Binding Update messages rejected
by the local mobility anchor with status code in the
Binding Acknowledgement message indicating
'Not local mobility anchor for this mobile node'
(Code 153).
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
REFERENCE
"RFC 5213: Sections 5.3.1, 8.9"
::= { pmip6BindingRegCounters 3 }
pmip6ProxyRegNotEnabled OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Proxy Binding Update messages rejected
by the local mobility anchor with status code in the
Binding Acknowledgement message indicating
'Proxy Registration not enabled' (Code 152).
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
Keeni, et al. Standards Track [Page 30]
RFC 6475 PMIPV6-MIB May 2012
REFERENCE
"RFC 5213: Sections 5.3.1, 6.9.1.2, 8.9"
::= { pmip6BindingRegCounters 4 }
pmip6MissingHomeNetworkPrefixOption OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Proxy Binding Update messages rejected
by the local mobility anchor with status code in the
Binding Acknowledgement message indicating
'Missing home network prefix option' (Code 158).
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
REFERENCE
"RFC 5213: Sections 5.3.1, 8.9"
::= { pmip6BindingRegCounters 5 }
pmip6MissingHandOffIndicatorOption OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Proxy Binding Update messages rejected
by the local mobility anchor with status code in the
Binding Acknowledgement message indicating
'Missing handoff indicator option' (Code 161).
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
REFERENCE
"RFC 5213: Sections 5.3.1, 8.9"
::= { pmip6BindingRegCounters 6 }
pmip6MissingAccessTechTypeOption OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Proxy Binding Update messages rejected
by the local mobility anchor with status code in the
Binding Acknowledgement message indicating
'Missing access technology type option' (Code 162).
Keeni, et al. Standards Track [Page 31]
RFC 6475 PMIPV6-MIB May 2012
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
REFERENCE
"RFC 5213: Sections 5.3.1, 8.9"
::= { pmip6BindingRegCounters 7 }
pmip6NotAuthorizedForHomeNetworkPrefix OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Proxy Binding Update messages rejected
by the local mobility anchor with status code in the
Binding Acknowledgement message indicating
'Mobile node not authorized for one or more of the
requesting home network prefixes' (Code 155).
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
REFERENCE
"RFC 5213: Sections 5.3.2, 6.9.1.2, 8.9"
::= { pmip6BindingRegCounters 8 }
pmip6TimestampMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Proxy Binding Update messages rejected
by the local mobility anchor with status code in the
Binding Acknowledgement message indicating
'Invalid timestamp value (the clocks are out of sync)'
(Code 156).
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
REFERENCE
"RFC 5213: Sections 5.5, 6.9.1.2, 8.9"
::= { pmip6BindingRegCounters 9 }
Keeni, et al. Standards Track [Page 32]
RFC 6475 PMIPV6-MIB May 2012
pmip6TimestampLowerThanPrevAccepted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Proxy Binding Update messages rejected
by the local mobility anchor with status code in the
Binding Acknowledgement message indicating
'The timestamp value is lower than the previously
accepted value' (Code 157).
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
REFERENCE
"RFC 5213: Sections 5.5, 6.9.1.2, 8.9"
::= { pmip6BindingRegCounters 10 }
pmip6BcePbuPrefixSetDoNotMatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Proxy Binding Update messages rejected
by the local mobility anchor with status code in the
Binding Acknowledgement message indicating
'All the home network prefixes listed in the Binding
Cache entry do not match all the prefixes in the
received Proxy Binding Update' (Code 159).
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
REFERENCE
"RFC 5213: Sections 5.4.1.1, 8.9"
::= { pmip6BindingRegCounters 11 }
pmip6InitialBindingRegistrations OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Proxy Binding Update messages that
newly creates the Binding Cache entry.
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
Keeni, et al. Standards Track [Page 33]
RFC 6475 PMIPV6-MIB May 2012
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
REFERENCE
"RFC 5213: Sections 5.3.2"
::= { pmip6BindingRegCounters 12 }
pmip6BindingLifeTimeExtensionNoHandOff OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Proxy Binding Update messages for
extending the binding lifetime, received from the
same mobile access gateway that last updated the
binding.
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
REFERENCE
"RFC 5213: Sections 5.3.3"
::= { pmip6BindingRegCounters 13 }
pmip6BindingLifeTimeExtensionAfterHandOff OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Proxy Binding Update messages for
extending the binding lifetime, received from a new
mobile access gateway where the mobile node's
mobility session is handed off.
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
REFERENCE
"RFC 5213: Sections 5.3.4"
::= { pmip6BindingRegCounters 14 }
pmip6BindingDeRegistrations OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Keeni, et al. Standards Track [Page 34]
RFC 6475 PMIPV6-MIB May 2012
"Total number of Proxy Binding Update messages with
the lifetime value of zero.
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
REFERENCE
"RFC 5213: Sections 5.3.5"
::= { pmip6BindingRegCounters 15 }
pmip6BindingBindingAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Proxy Binding Acknowledgement
messages.
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
pmip6CounterDiscontinuityTime.
"
REFERENCE
"RFC 5213: Sections 5.3.5"
::= { pmip6BindingRegCounters 16 }
pmip6CounterDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion
at which any one or more of this PMIPv6 entity's
global counters, viz., counters with OID prefix
'pmip6BindingRegCounters' suffered a discontinuity.
If no such discontinuities have occurred since the
last re-initialization of the local management
subsystem, then this object will have a zero value.
"
::= { pmip6BindingRegCounters 17 }
pmip6LmaStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the PMIPv6 local
Keeni, et al. Standards Track [Page 35]
RFC 6475 PMIPV6-MIB May 2012
mobility anchor function is enabled for the managed
entity.
Changing the status from enabled(1) to disabled(2)
will terminate the PMIPv6 local mobility anchor
function. On the other hand, changing the status
from disabled(2) to enabled(1) will start the PMIPv6
local mobility anchor function.
The value of this object MUST remain unchanged
across reboots of the managed entity.
"
DEFVAL { disabled }
::= { pmip6LmaSystem 1 }
pmip6LmaLMAATable OBJECT-TYPE
SYNTAX SEQUENCE OF Pmip6LmaLMAAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table models the LMA Addresses configured
on the local mobility anchor. Each LMA Address acts as
a transport endpoint of the tunnel between the local
mobility anchor and the mobile access gateway and is
the transport endpoint of the tunnel between the local
mobility anchor and the mobile access gateway.
Entries in this table are not required to survive
a reboot of the managed entity.
"
REFERENCE
"RFC 5213: Sections 2.2, 5.6"
::= { pmip6LmaSystem 2 }
pmip6LmaLMAAEntry OBJECT-TYPE
SYNTAX Pmip6LmaLMAAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents a conceptual row in the
LMAA table. It represents each LMAA on the
local mobility anchor.
Implementers need to be aware that if the total
number of octets in pmip6LmaLMAA exceeds 113,
then OIDs of column instances in this row will
have more than 128 sub-identifiers and cannot
be accessed using SNMPv1, SNMPv2c, or SNMPv3.
Keeni, et al. Standards Track [Page 36]
RFC 6475 PMIPV6-MIB May 2012
"
INDEX { pmip6LmaLMAAType, pmip6LmaLMAA }
::= { pmip6LmaLMAATable 1 }
Pmip6LmaLMAAEntry ::=
SEQUENCE {
pmip6LmaLMAAType InetAddressType,
pmip6LmaLMAA InetAddress,
pmip6LmaLMAAState INTEGER
}
pmip6LmaLMAAType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The InetAddressType of the pmip6LmaLMAA
that follows.
"
::= { pmip6LmaLMAAEntry 1 }
pmip6LmaLMAA OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The LMAA configured on the local mobility anchor.
The type of the address represented by this object
is specified by the corresponding
pmip6LmaLMAAType object.
"
REFERENCE
"RFC 5213: Sections 2.2, 5.6"
::= { pmip6LmaLMAAEntry 2 }
pmip6LmaLMAAState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
activated(2),
tunneled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the state of the LMAA:
unknown -- The state of the LMAA
cannot be determined.
Keeni, et al. Standards Track [Page 37]
RFC 6475 PMIPV6-MIB May 2012
activated -- The LMAA is ready to establish
a tunnel.
tunneled -- The LMAA is used to set up the
bidirectional tunnel.
"
::= { pmip6LmaLMAAEntry 3 }
pmip6LmaMinDelayBeforeBCEDelete OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable specifies the length of time in
milliseconds the local mobility anchor MUST wait before
it deletes a Binding Cache entry of a mobile node, upon
receiving a Proxy Binding Update message from a mobile
access gateway with a lifetime value of 0.
During this wait time, if the local mobility anchor
receives a Proxy Binding Update for the same mobility
binding, with a lifetime value greater than 0, then it
must update the Binding Cache entry with the accepted
binding values. By the end of this wait time, if the
local mobility anchor did not receive any valid Proxy
Binding Update message for that mobility binding, it
MUST delete the Binding Cache entry. This delay
essentially ensures that a mobile node's Binding Cache
entry is not deleted too quickly and allows some time
for the new mobile access gateway to complete the
signaling for the mobile node.
The default value for this variable is 10000
milliseconds.
"
REFERENCE
"RFC 5213: Sections 5.3.5, 9.1"
DEFVAL { 10000 }
::= { pmip6LmaConf 1 }
pmip6LmaMaxDelayBeforeNewBCEAssign OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable specifies the length of time in
milliseconds the local mobility anchor MUST wait for
the de-registration message for an existing mobility
session before it decides to create a new mobility
Keeni, et al. Standards Track [Page 38]
RFC 6475 PMIPV6-MIB May 2012
session.
The default value for this variable is 1500
milliseconds. Note that there is a dependency between
this value and the values used in the retransmission
algorithm for Proxy Binding Updates. The
retransmissions need to happen before
MaxDelayBeforeNewBCEAssign runs out, as otherwise there
are situations where a de-registration from a previous
mobile access gateway may be lost, and the local
mobility anchor creates, needlessly, a new mobility
session and new prefixes for the mobile node. However,
this affects situations where there is no information
from the lower layers about the type of a handoff or
other parameters that can be used for identifying the
mobility session.
"
REFERENCE
"RFC 5213: Sections 5.4.1.2, 5.4.1.3, 9.1"
DEFVAL { 1500 }
::= { pmip6LmaConf 2 }
pmip6LmaTimestampValidityWindow OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable specifies the maximum length of time
difference in milliseconds between the timestamp in the
received Proxy Binding Update message and the current
time of day on the local mobility anchor that is
allowed by the local mobility anchor for the received
message to be considered valid.
The default value for this variable is 300 milliseconds.
This variable must be adjusted to suit the deployments.
"
REFERENCE
"RFC 5213: Sections 5.5, 9.1"
DEFVAL { 300 }
::= { pmip6LmaConf 3 }
pmip6LmaMnIdentifierTable OBJECT-TYPE
SYNTAX SEQUENCE OF Pmip6LmaMnIdentifierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the identifiers of mobile nodes
served by the LMA.
Keeni, et al. Standards Track [Page 39]
RFC 6475 PMIPV6-MIB May 2012
Entries in this table are not required to survive
a reboot of the managed entity.
"
REFERENCE
"RFC 5213: Sections 2, 6.1"
::= { pmip6LmaConf 4 }
pmip6LmaMnIdentifierEntry OBJECT-TYPE
SYNTAX Pmip6LmaMnIdentifierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the mobile node identifier table.
"
INDEX { pmip6BindingMnIndex
}
::= { pmip6LmaMnIdentifierTable 1 }
Pmip6LmaMnIdentifierEntry ::=
SEQUENCE {
pmip6LmaMnIdentifier Pmip6MnIdentifier
}
pmip6LmaMnIdentifier OBJECT-TYPE
SYNTAX Pmip6MnIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identity of a mobile node in the Proxy Mobile IPv6
domain.
"
REFERENCE
"RFC 5213: Section 2.2"
::= { pmip6LmaMnIdentifierEntry 1 }
pmip6LmaMnLLIdentifierTable OBJECT-TYPE
SYNTAX SEQUENCE OF Pmip6LmaMnLLIdentifierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the link-layer identifiers
of the interfaces of the mobile nodes served
by the LMA.
Entries in this table are not required to survive
a reboot of the managed entity.
"
REFERENCE
"RFC 5213: Sections 2, 6.1"
Keeni, et al. Standards Track [Page 40]
RFC 6475 PMIPV6-MIB May 2012
::= { pmip6LmaConf 5 }
pmip6LmaMnLLIdentifierEntry OBJECT-TYPE
SYNTAX Pmip6LmaMnLLIdentifierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the mobile node link-layer identifier
table.
"
INDEX { pmip6BindingMnIndex, pmip6BindingMnLLIndex
}
::= { pmip6LmaMnLLIdentifierTable 1 }
Pmip6LmaMnLLIdentifierEntry ::=
SEQUENCE {
pmip6LmaMnLLIdentifier Pmip6MnLLIdentifier
}
pmip6LmaMnLLIdentifier OBJECT-TYPE
SYNTAX Pmip6MnLLIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The link-layer identifier of the mobile node's
connected interface on the access link.
"
::= { pmip6LmaMnLLIdentifierEntry 1 }
pmip6LmaHomeNetworkPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF Pmip6LmaHomeNetworkPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table representing the home network prefixes
assigned to the connected interfaces of all the
mobile nodes anchored at the LMA.
"
REFERENCE
"RFC 5213: Sections 2, 5.1, 5.2"
::= { pmip6LmaConf 6 }
pmip6LmaHomeNetworkPrefixEntry OBJECT-TYPE
SYNTAX Pmip6LmaHomeNetworkPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the home network prefixes table.
Keeni, et al. Standards Track [Page 41]
RFC 6475 PMIPV6-MIB May 2012
Implementers need to be aware that if the total
number of octets in pmip6LmaHomeNetworkPrefix
exceeds 111 then OIDs of column instances in this
row will have more than 128 sub-identifiers and
cannot be accessed using SNMPv1, SNMPv2c, or
SNMPv3.
"
INDEX { pmip6BindingMnIndex, pmip6BindingMnLLIndex,
pmip6LmaHomeNetworkPrefixType,
pmip6LmaHomeNetworkPrefix }
::= { pmip6LmaHomeNetworkPrefixTable 1 }
Pmip6LmaHomeNetworkPrefixEntry ::=
SEQUENCE {
pmip6LmaHomeNetworkPrefixType InetAddressType,
pmip6LmaHomeNetworkPrefix InetAddress,
pmip6LmaHomeNetworkPrefixLength InetAddressPrefixLength,
pmip6LmaHomeNetworkPrefixLifeTime Gauge32
}
pmip6LmaHomeNetworkPrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The InetAddressType of the pmip6LmaHomeNetworkPrefix
that follows.
"
::= { pmip6LmaHomeNetworkPrefixEntry 1 }
pmip6LmaHomeNetworkPrefix OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mobile network prefix that is delegated to the
mobile node. The type of the address represented by
this object is specified by the corresponding
pmip6LmaHomeNetworkPrefixType object.
"
REFERENCE
"RFC 5213: Section 2"
::= { pmip6LmaHomeNetworkPrefixEntry 2 }
pmip6LmaHomeNetworkPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
Keeni, et al. Standards Track [Page 42]
RFC 6475 PMIPV6-MIB May 2012
STATUS current
DESCRIPTION
"The prefix length of the home network prefix.
"
::= { pmip6LmaHomeNetworkPrefixEntry 3 }
pmip6LmaHomeNetworkPrefixLifeTime OBJECT-TYPE
SYNTAX Gauge32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lifetime (in seconds) granted to the mobile
node for this registration.
"
REFERENCE
"RFC 5213: Section 5.3"
::= { pmip6LmaHomeNetworkPrefixEntry 4 }
--
-- pmip6Notifications
--
--
pmip6MagHomeTunnelEstablished NOTIFICATION-TYPE
OBJECTS {
pmip6MagBLTunnelIfIdentifier,
pmip6MagProxyCOAState
}
STATUS current
DESCRIPTION
"This notification is sent by the Proxy Mobile IPv6
entities every time the tunnel is established between
the local mobility anchor and mobile access gateway.
"
REFERENCE
"RFC 5213: Section 5.6.1"
::= { pmip6Notifications 1 }
pmip6MagHomeTunnelReleased NOTIFICATION-TYPE
OBJECTS {
pmip6MagBLTunnelIfIdentifier,
pmip6MagProxyCOAState
}
STATUS current
DESCRIPTION
"This notification is sent by the Proxy Mobile IPv6
entities every time the tunnel between the local
Keeni, et al. Standards Track [Page 43]
RFC 6475 PMIPV6-MIB May 2012
mobility anchor and mobile access gateway is released.
"
REFERENCE
"RFC 5213: Section 5.6.1"
::= { pmip6Notifications 2}
pmip6LmaHomeTunnelEstablished NOTIFICATION-TYPE
OBJECTS {
pmip6BindingTunnelIfIdentifier,
pmip6LmaLMAAState
}
STATUS current
DESCRIPTION
"This notification is sent by the Proxy Mobile IPv6
entities every time the tunnel is established between
the local mobility anchor and mobile access gateway.
"
REFERENCE
"RFC 5213: Section 5.6.1"
::= { pmip6Notifications 3 }
pmip6LmaHomeTunnelReleased NOTIFICATION-TYPE
OBJECTS {
pmip6BindingTunnelIfIdentifier,
pmip6LmaLMAAState
}
STATUS current
DESCRIPTION
"This notification is sent by the Proxy Mobile IPv6
entities every time the tunnel between the local
mobility anchor and mobile access gateway is released.
"
REFERENCE
"RFC 5213: Section 5.6.1"
::= { pmip6Notifications 4}
-- Conformance information
pmip6Groups OBJECT IDENTIFIER ::= { pmip6Conformance 1 }
pmip6Compliances OBJECT IDENTIFIER ::= { pmip6Conformance 2 }
-- Units of conformance
pmip6SystemGroup OBJECT-GROUP
OBJECTS {
pmip6Capabilities,
pmip6MobileNodeGeneratedTimestampInUse,
pmip6FixedMagLinkLocalAddressOnAllAccessLinksType,
pmip6FixedMagLinkLocalAddressOnAllAccessLinks,
pmip6FixedMagLinkLayerAddressOnAllAccessLinks
Keeni, et al. Standards Track [Page 44]
RFC 6475 PMIPV6-MIB May 2012
}
STATUS current
DESCRIPTION
" A collection of objects for basic PMIPv6
monitoring."
::= { pmip6Groups 1 }
pmip6BindingCacheGroup OBJECT-GROUP
OBJECTS {
pmip6BindingPBUFlag,
pmip6BindingMnIndex,
pmip6BindingMnLLIndex,
pmip6BindingMagLinkLocalAddressType,
pmip6BindingMagLinkLocalAddress,
pmip6BindingTunnelIfIdentifier,
pmip6BindingMnInterfaceATT,
pmip6BindingTimeRecentlyAccepted,
pmip6LmaMnIdentifier,
pmip6LmaMnLLIdentifier
}
STATUS current
DESCRIPTION
" A collection of objects for monitoring the
PMIPv6 extensions of the Binding Cache."
::= { pmip6Groups 2 }
pmip6StatsGroup OBJECT-GROUP
OBJECTS {
pmip6MissingMnIdentifierOption,
pmip6MagNotAuthorizedForProxyReg,
pmip6NotLMAForThisMobileNode,
pmip6ProxyRegNotEnabled,
pmip6MissingHomeNetworkPrefixOption,
pmip6MissingHandOffIndicatorOption,
pmip6MissingAccessTechTypeOption,
pmip6NotAuthorizedForHomeNetworkPrefix,
pmip6TimestampMismatch,
pmip6TimestampLowerThanPrevAccepted,
pmip6BcePbuPrefixSetDoNotMatch,
pmip6InitialBindingRegistrations,
pmip6BindingLifeTimeExtensionNoHandOff,
pmip6BindingLifeTimeExtensionAfterHandOff,
pmip6BindingDeRegistrations,
pmip6BindingBindingAcks,
pmip6CounterDiscontinuityTime
}
STATUS current
DESCRIPTION
Keeni, et al. Standards Track [Page 45]
RFC 6475 PMIPV6-MIB May 2012
" A collection of objects for basic PMIPv6
statistics monitoring.
"
::= { pmip6Groups 3 }
pmip6MagSystemGroup OBJECT-GROUP
OBJECTS {
pmip6MagStatus,
pmip6MagProxyCOAState
}
STATUS current
DESCRIPTION
" A collection of objects for monitoring the
PMIPv6-system-related objects on a mobile router."
::= { pmip6Groups 4 }
pmip6MagConfigurationGroup OBJECT-GROUP
OBJECTS {
pmip6MagHomeNetworkPrefixLength,
pmip6MagHomeNetworkPrefixLifeTime,
pmip6MagEnableMagLocalRouting
}
STATUS current
DESCRIPTION
" A collection of objects for monitoring the
configuration-related objects on a mobile access
gateway.
"
::= { pmip6Groups 5 }
pmip6MagRegistrationGroup OBJECT-GROUP
OBJECTS {
pmip6MagBLFlag,
pmip6MagBLMnIndex,
pmip6MagBLMnLLIndex,
pmip6MagBLMagLinkLocalAddressType,
pmip6MagBLMagLinkLocalAddress,
pmip6MagBLMagIfIdentifierToMn,
pmip6MagBLTunnelIfIdentifier,
pmip6MagBLMnInterfaceATT,
pmip6MagBLTimeRecentlyAccepted,
pmip6MagMnIdentifier,
pmip6MagMnLLIdentifier,
pmip6MagProfMnIdentifier,
pmip6MagProfMnLocalMobilityAnchorAddressType,
pmip6MagProfMnLocalMobilityAnchorAddress
}
STATUS current
DESCRIPTION
Keeni, et al. Standards Track [Page 46]
RFC 6475 PMIPV6-MIB May 2012
" A collection of objects for monitoring the
registration-related objects on a mobile access
gateway.
"
::= { pmip6Groups 6 }
pmip6LmaSystemGroup OBJECT-GROUP
OBJECTS {
pmip6LmaStatus,
pmip6LmaLMAAState
}
STATUS current
DESCRIPTION
" A collection of objects for monitoring the
system-related objects on an LMA."
::= { pmip6Groups 7 }
pmip6LmaConfigurationGroup OBJECT-GROUP
OBJECTS {
pmip6LmaMinDelayBeforeBCEDelete,
pmip6LmaMaxDelayBeforeNewBCEAssign,
pmip6LmaTimestampValidityWindow,
pmip6LmaHomeNetworkPrefixLength,
pmip6LmaHomeNetworkPrefixLifeTime
}
STATUS current
DESCRIPTION
" A collection of objects for Monitoring the
configuration-related objects on an LMA."
::= { pmip6Groups 8 }
pmip6MagNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
pmip6MagHomeTunnelEstablished,
pmip6MagHomeTunnelReleased
}
STATUS current
DESCRIPTION
"A collection of notifications from a home agent
or correspondent node to the Manager about the
tunnel status of the mobile router.
"
::= { pmip6Groups 9 }
pmip6LmaNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
pmip6LmaHomeTunnelEstablished,
pmip6LmaHomeTunnelReleased
Keeni, et al. Standards Track [Page 47]
RFC 6475 PMIPV6-MIB May 2012
}
STATUS current
DESCRIPTION
"A collection of notifications from a home agent
or correspondent node to the Manager about the
tunnel status of the mobile router.
"
::= { pmip6Groups 10 }
-- Compliance statements
pmip6CoreCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities
that implement the PMIPV6-MIB.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the pmip6BindingHomeAddress
-- object.
--
"
MODULE -- this module
MANDATORY-GROUPS { pmip6SystemGroup
}
::= { pmip6Compliances 1 }
pmip6Compliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities
that implement the PMIPV6-MIB.
"
MODULE -- this module
MANDATORY-GROUPS { pmip6SystemGroup,
pmip6BindingCacheGroup,
pmip6StatsGroup
}
::= { pmip6Compliances 2 }
pmip6CoreReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
Keeni, et al. Standards Track [Page 48]
RFC 6475 PMIPV6-MIB May 2012
DESCRIPTION
"The compliance statement for SNMP entities
that implement the PMIPV6-MIB without support
for read-write (i.e., in read-only mode).
"
MODULE -- this module
MANDATORY-GROUPS { pmip6SystemGroup
}
OBJECT pmip6MobileNodeGeneratedTimestampInUse
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pmip6FixedMagLinkLocalAddressOnAllAccessLinksType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pmip6FixedMagLinkLocalAddressOnAllAccessLinks
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pmip6FixedMagLinkLayerAddressOnAllAccessLinks
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { pmip6Compliances 3 }
pmip6ReadOnlyCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities
that implement the PMIPV6-MIB without support
for read-write (i.e., in read-only mode).
"
MODULE -- this module
MANDATORY-GROUPS { pmip6SystemGroup,
pmip6BindingCacheGroup,
pmip6StatsGroup
}
OBJECT pmip6MobileNodeGeneratedTimestampInUse
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pmip6FixedMagLinkLocalAddressOnAllAccessLinksType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pmip6FixedMagLinkLocalAddressOnAllAccessLinks
Keeni, et al. Standards Track [Page 49]
RFC 6475 PMIPV6-MIB May 2012
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pmip6FixedMagLinkLayerAddressOnAllAccessLinks
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { pmip6Compliances 4 }
pmip6MagCoreCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities
that implement the PMIPV6-MIB.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6MagProxyCOAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOAType
-- object.
--
-- OBJECT pmip6MagProxyCOA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOA
-- object.
--
"
MODULE -- this module
MANDATORY-GROUPS { pmip6MagSystemGroup
}
::= { pmip6Compliances 5 }
pmip6MagCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities that
implement the PMIPV6-MIB for monitoring configuration-
related information, registration details, and
statistics on a mobile access gateway.
Keeni, et al. Standards Track [Page 50]
RFC 6475 PMIPV6-MIB May 2012
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6MagProxyCOAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOA
-- object.
--
-- OBJECT pmip6MagProxyCOA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOAType
-- object.
--
-- OBJECT pmip6MagHomeNetworkPrefixType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6MagHomeNetworkPrefix object.
--
-- OBJECT pmip6MagHomeNetworkPrefix
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6MagHomeNetworkPrefix object.
--
"
MODULE -- this module
MANDATORY-GROUPS { pmip6MagSystemGroup,
pmip6MagConfigurationGroup,
pmip6MagRegistrationGroup
}
::= { pmip6Compliances 6 }
pmip6MagCoreReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities
that implement the PMIPV6-MIB without support
for read-write (i.e., in read-only mode).
Keeni, et al. Standards Track [Page 51]
RFC 6475 PMIPV6-MIB May 2012
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6MagProxyCOAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOA
-- object.
--
-- OBJECT pmip6MagProxyCOA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOAType
-- object.
--
-- OBJECT pmip6MagHomeNetworkPrefixType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6MagHomeNetworkPrefix object.
--
"
MODULE -- this module
MANDATORY-GROUPS { pmip6MagSystemGroup
}
OBJECT pmip6MagStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { pmip6Compliances 7 }
pmip6MagReadOnlyCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities that
implement the PMIPV6-MIB without support for read-
write (i.e., in read-only mode) and with support
for monitoring configuration-related information,
registration details, and statistics on a mobile
access gateway.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
Keeni, et al. Standards Track [Page 52]
RFC 6475 PMIPV6-MIB May 2012
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6MagProxyCOAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOA
-- object.
--
-- OBJECT pmip6MagProxyCOA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOAType
-- object.
--
-- OBJECT pmip6MagHomeNetworkPrefixType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6MagHomeNetworkPrefix object.
--
-- OBJECT pmip6MagHomeNetworkPrefix
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6MagHomeNetworkPrefix object.
--
"
MODULE -- this module
MANDATORY-GROUPS { pmip6MagSystemGroup,
pmip6MagConfigurationGroup,
pmip6MagRegistrationGroup
}
OBJECT pmip6MagStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pmip6MagEnableMagLocalRouting
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { pmip6Compliances 8 }
Keeni, et al. Standards Track [Page 53]
RFC 6475 PMIPV6-MIB May 2012
pmip6LmaCoreCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities
that implement the PMIPV6-MIB.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6LmaLMAAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaLMAA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
"
MODULE -- this module
MANDATORY-GROUPS { pmip6LmaSystemGroup
}
::= { pmip6Compliances 9 }
pmip6LmaCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities that
implement the PMIPV6-MIB for monitoring configuration-
related information, registration details, and
statistics on a mobile access gateway.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6LmaLMAAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
Keeni, et al. Standards Track [Page 54]
RFC 6475 PMIPV6-MIB May 2012
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaLMAA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaHomeNetworkPrefixType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6LmaHomeNetworkPrefix object.
--
-- OBJECT pmip6LmaHomeNetworkPrefix
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6LmaHomeNetworkPrefix object.
--
"
MODULE -- this module
MANDATORY-GROUPS { pmip6LmaSystemGroup,
pmip6LmaConfigurationGroup
}
::= { pmip6Compliances 10 }
pmip6LmaReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities
that implement the PMIPV6-MIB.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6LmaLMAAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
Keeni, et al. Standards Track [Page 55]
RFC 6475 PMIPV6-MIB May 2012
-- OBJECT pmip6LmaLMAA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
"
MODULE -- this module
MANDATORY-GROUPS { pmip6LmaSystemGroup
}
OBJECT pmip6LmaStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { pmip6Compliances 11 }
pmip6LmaReadOnlyCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities that
implement the PMIPV6-MIB without support
for read-write (i.e., in read-only mode) and for
monitoring configuration-related information,
registration details, and statistics on a mobile
access gateway.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6LmaLMAAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaLMAA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
Keeni, et al. Standards Track [Page 56]
RFC 6475 PMIPV6-MIB May 2012
-- OBJECT pmip6LmaHomeNetworkPrefixType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6LmaHomeNetworkPrefix object.
--
-- OBJECT pmip6LmaHomeNetworkPrefix
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6LmaHomeNetworkPrefix object.
--
"
MODULE -- this module
MANDATORY-GROUPS { pmip6LmaSystemGroup,
pmip6LmaConfigurationGroup
}
OBJECT pmip6LmaStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pmip6LmaMinDelayBeforeBCEDelete
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pmip6LmaMaxDelayBeforeNewBCEAssign
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pmip6LmaTimestampValidityWindow
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT pmip6LmaHomeNetworkPrefixLifeTime
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { pmip6Compliances 12 }
pmip6MagNotificationCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities that
implement the PMIPV6-MIB and support notification
from the mobile access gateway.
Keeni, et al. Standards Track [Page 57]
RFC 6475 PMIPV6-MIB May 2012
"
MODULE -- this module
MANDATORY-GROUPS { pmip6MagNotificationGroup
}
::= { pmip6Compliances 13 }
pmip6LmaNotificationCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities that
implement the PMIPV6-MIB and support notification
from the LMA.
"
MODULE -- this module
MANDATORY-GROUPS { pmip6LmaNotificationGroup
}
::={ pmip6Compliances 14 }
END
6. Security Considerations
There are a number of management objects defined in this MIB module
with a MAX-ACCESS clause of read-write. Such objects may be
considered sensitive or vulnerable in some network environments. The
support for SET operations in a non-secure environment without proper
protection can have a negative effect on network operations. These
are the tables and objects and the corresponding
sensitivity/vulnerability:
The value of the following objects is used to enable or disable
the PMIPv6 functionality on the corresponding PMIPv6 entity.
Access to these MOs may be abused to disrupt the communication
that depends on the PMIPv6 functionality.
pmip6MagStatus
pmip6LmaStatus
Access to the following MOs may be abused to misconfigure PMIPv6
entities and disrupt communications.
pmip6MobileNodeGeneratedTimestampInUse
pmip6FixedMagLinkLocalAddressOnAllAccessLinksType
pmip6FixedMagLinkLocalAddressOnAllAccessLinks
pmip6FixedMagLinkLayerAddressOnAllAccessLinks
pmip6MagEnableMagLocalRouting
pmip6MagHomeNetworkPrefixLifeTime
pmip6LmaMinDelayBeforeBCEDelete
pmip6LmaMaxDelayBeforeNewBCEAssign
pmip6LmaTimestampValidityWindow
Keeni, et al. Standards Track [Page 58]
RFC 6475 PMIPV6-MIB May 2012
pmip6LmaHomeNetworkPrefixLifeTime
Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over
the network via SNMP. These are the tables and objects and their
sensitivity/vulnerability:
The following address-related objects may be considered to be
particularly sensitive and/or private.
pmip6LmaHomeNetworkPrefixType
pmip6LmaHomeNetworkPrefix
pmip6LmaHomeNetworkPrefixLength
The following MN Identifier-related MOs may be used to identify
users. These may be considered to be sensitive and/or private.
pmip6MagMnIdentifier
pmip6MagMnLLIdentifier
pmip6LmaMnIdentifier
pmip6LmaMnLLIdentifier
pmip6MagProfMnIdentifier
SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPsec),
even then, there is no control as to who on the secure network is
allowed to access and GET/SET (read/change/create/delete) the objects
in this MIB module.
It is RECOMMENDED that implementers consider the security features as
provided by the SNMPv3 framework (see [RFC3410], section 8),
including full support for the SNMPv3 cryptographic mechanisms (for
authentication and privacy).
Implementations MUST provide the security features described by the
SNMPv3 framework (see [RFC3410]), including full support for
authentication and privacy via the User-based Security Model (USM)
[RFC3414] with the AES cipher algorithm [RFC3826]. Implementations
MAY also provide support for the Transport Security Model (TSM)
[RFC5591] in combination with a secure transport such as SSH
[RFC5592] or TLS/DTLS [RFC6353].
Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator
Keeni, et al. Standards Track [Page 59]
RFC 6475 PMIPV6-MIB May 2012
responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them.
7. IANA Considerations
IANA has assigned the following:
1. a base arc in the 'mib-2' (Standards Track) OID tree for the
'pmip6TCMIB' MODULE-IDENTITY defined in the PMIPV6-TC-MIB.
2. a base arc in the 'mib-2' (Standards Track) OID tree for the
'pmip6MIB' MODULE-IDENTITY defined in the PMIPV6-MIB.
8. References
8.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Structure of Management Information Version 2 (SMIv2)",
STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Textual Conventions for SMIv2", STD 58, RFC 2579, April
1999.
[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Conformance Statements for SMIv2", STD 58, RFC 2580,
April 1999.
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
Schoenwaelder, "Textual Conventions for Internet Network
Addresses", RFC 4001, February 2005.
[RFC4283] Patel, A., Leung, K., Khalil, M., Akhtar, H., and K.
Chowdhury, "Mobile Node Identifier Option for Mobile IPv6
(MIPv6)", RFC 4283, November 2005.
[RFC4293] Routhier, S., Ed., "Management Information Base for the
Internet Protocol (IP)", RFC 4293, April 2006.
[RFC4295] Keeni, G., Koide, K., Nagami, K., and S. Gundavelli,
"Mobile IPv6 Management Information Base", RFC 4295, April
2006.
Keeni, et al. Standards Track [Page 60]
RFC 6475 PMIPV6-MIB May 2012
[RFC5213] Gundavelli, S., Ed., Leung, K., Devarapalli, V.,
Chowdhury, K., and B. Patil, "Proxy Mobile IPv6", RFC
5213, August 2008.
[RFC6275] Perkins, C., Ed., Johnson, D., and J. Arkko, "Mobility
Support in IPv6", RFC 6275, July 2011.
8.2. Informative References
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002.
[RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", STD 62, RFC 3414, December 2002.
[RFC3826] Blumenthal, U., Maino, F., and K. McCloghrie, "The
Advanced Encryption Standard (AES) Cipher Algorithm in the
SNMP User-based Security Model", RFC 3826, June 2004.
[RFC4831] Kempf, J., Ed., "Goals for Network-Based Localized
Mobility Management (NETLMM)", RFC 4831, April 2007.
[RFC5591] Harrington, D. and W. Hardaker, "Transport Security Model
for the Simple Network Management Protocol (SNMP)", RFC
5591, June 2009.
[RFC5592] Harrington, D., Salowey, J., and W. Hardaker, "Secure
Shell Transport Model for the Simple Network Management
Protocol (SNMP)", RFC 5592, June 2009.
[RFC6353] Hardaker, W., "Transport Layer Security (TLS) Transport
Model for the Simple Network Management Protocol (SNMP)",
RFC 6353, July 2011.
Keeni, et al. Standards Track [Page 61]
RFC 6475 PMIPV6-MIB May 2012
9. Acknowledgements
The following individuals and groups have contributed to this
document with discussions and comments:
Adrian Farrel
Dan Romascanu
David Harrington
Dirk von-Hugo
Francis Dupont
Harrie Hazewinkel
Jari Arkko
Sean Turner
Stephen Farrell
Vincent Roca
WIDE Project netman-WG
Keeni, et al. Standards Track [Page 62]
RFC 6475 PMIPV6-MIB May 2012
Authors' Addresses
Glenn Mansfield Keeni
Cyber Solutions, Inc.
6-6-3 Minami Yoshinari
Aoba-ku, Sendai 989-3204
Japan
Phone: +81-22-303-4012
EMail: glenn@cysols.com
Kazuhide Koide
KDDI Corporation
GARDEN AIR TOWER 3-10-10, Iidabashi
Chiyoda-ku, Tokyo, 102-8460
Japan
Phone: +81-3-6678-3378
EMail: ka-koide@kddi.com
Sri Gundavelli
Cisco Systems
170 W.Tasman Drive,
San Jose, CA 95134
USA
Phone: +1-408-527-6109
EMail: sgundave@cisco.com
Ryuji Wakikawa
TOYOTA InfoTechnology Center, U.S.A., Inc.
465 Bernardo Avenue
Mountain View, CA 94043
USA
EMail: ryuji@us.toyota-itc.com
Keeni, et al. Standards Track [Page 63]