💾 Archived View for gmi.noulin.net › rfc › rfc8551.gmi captured on 2022-06-12 at 06:06:53. Gemini links have been rewritten to link to archived content

View Raw

More Information

-=-=-=-=-=-=-

Obsoletes:

RFC5751

Keywords: S/MIME







Internet Engineering Task Force (IETF)                         J. Schaad
Request for Comments: 8551                                August Cellars
Obsoletes: 5751                                              B. Ramsdell
Category: Standards Track                         Brute Squad Labs, Inc.
ISSN: 2070-1721                                                S. Turner
                                                                   sn3rd
                                                              April 2019


   Secure/Multipurpose Internet Mail Extensions (S/MIME) Version 4.0
                         Message Specification

Abstract

   This document defines Secure/Multipurpose Internet Mail Extensions
   (S/MIME) version 4.0.  S/MIME provides a consistent way to send and
   receive secure MIME data.  Digital signatures provide authentication,
   message integrity, and non-repudiation with proof of origin.
   Encryption provides data confidentiality.  Compression can be used to
   reduce data size.  This document obsoletes RFC 5751.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   https://www.rfc-editor.org/info/rfc8551.

















Schaad, et al.               Standards Track                    [Page 1]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


Copyright Notice

   Copyright (c) 2019 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

   This document may contain material from IETF Documents or IETF
   Contributions published or made publicly available before November
   10, 2008.  The person(s) controlling the copyright in some of this
   material may not have granted the IETF Trust the right to allow
   modifications of such material outside the IETF Standards Process.
   Without obtaining an adequate license from the person(s) controlling
   the copyright in such materials, this document may not be modified
   outside the IETF Standards Process, and derivative works of it may
   not be created outside the IETF Standards Process, except to format
   it for publication as an RFC or to translate it into languages other
   than English.

























Schaad, et al.               Standards Track                    [Page 2]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   5
     1.1.  Specification Overview  . . . . . . . . . . . . . . . . .   5
     1.2.  Definitions . . . . . . . . . . . . . . . . . . . . . . .   6
     1.3.  Conventions Used in This Document . . . . . . . . . . . .   7
     1.4.  Compatibility with Prior Practice of S/MIME . . . . . . .   8
     1.5.  Changes from S/MIME v3 to S/MIME v3.1 . . . . . . . . . .   9
     1.6.  Changes from S/MIME v3.1 to S/MIME v3.2 . . . . . . . . .   9
     1.7.  Changes for S/MIME v4.0 . . . . . . . . . . . . . . . . .  11
   2.  CMS Options . . . . . . . . . . . . . . . . . . . . . . . . .  12
     2.1.  DigestAlgorithmIdentifier . . . . . . . . . . . . . . . .  12
     2.2.  SignatureAlgorithmIdentifier  . . . . . . . . . . . . . .  12
     2.3.  KeyEncryptionAlgorithmIdentifier  . . . . . . . . . . . .  13
     2.4.  General Syntax  . . . . . . . . . . . . . . . . . . . . .  13
       2.4.1.  Data Content Type . . . . . . . . . . . . . . . . . .  14
       2.4.2.  SignedData Content Type . . . . . . . . . . . . . . .  14
       2.4.3.  EnvelopedData Content Type  . . . . . . . . . . . . .  14
       2.4.4.  AuthEnvelopedData Content Type  . . . . . . . . . . .  14
       2.4.5.  CompressedData Content Type . . . . . . . . . . . . .  14
     2.5.  Attributes and the SignerInfo Type  . . . . . . . . . . .  15
       2.5.1.  Signing Time Attribute  . . . . . . . . . . . . . . .  15
       2.5.2.  SMIMECapabilities Attribute . . . . . . . . . . . . .  16
       2.5.3.  Encryption Key Preference Attribute . . . . . . . . .  17
     2.6.  SignerIdentifier SignerInfo Type  . . . . . . . . . . . .  19
     2.7.  ContentEncryptionAlgorithmIdentifier  . . . . . . . . . .  19
       2.7.1.  Deciding Which Encryption Method to Use . . . . . . .  19
       2.7.2.  Choosing Weak Encryption  . . . . . . . . . . . . . .  21
       2.7.3.  Multiple Recipients . . . . . . . . . . . . . . . . .  21
   3.  Creating S/MIME Messages  . . . . . . . . . . . . . . . . . .  21
     3.1.  Preparing the MIME Entity for Signing, Enveloping, or
           Compressing . . . . . . . . . . . . . . . . . . . . . . .  22
       3.1.1.  Canonicalization  . . . . . . . . . . . . . . . . . .  23
       3.1.2.  Transfer Encoding . . . . . . . . . . . . . . . . . .  24
       3.1.3.  Transfer Encoding for Signing Using multipart/signed   25
       3.1.4.  Sample Canonical MIME Entity  . . . . . . . . . . . .  25
     3.2.  The application/pkcs7-mime Media Type . . . . . . . . . .  26
       3.2.1.  The name and filename Parameters  . . . . . . . . . .  27
       3.2.2.  The smime-type Parameter  . . . . . . . . . . . . . .  28
     3.3.  Creating an Enveloped-Only Message  . . . . . . . . . . .  29
     3.4.  Creating an Authenticated Enveloped-Only Message  . . . .  30
     3.5.  Creating a Signed-Only Message  . . . . . . . . . . . . .  31
       3.5.1.  Choosing a Format for Signed-Only Messages  . . . . .  32
       3.5.2.  Signing Using application/pkcs7-mime with SignedData   32
       3.5.3.  Signing Using the multipart/signed Format . . . . . .  33
     3.6.  Creating a Compressed-Only Message  . . . . . . . . . . .  36
     3.7.  Multiple Operations . . . . . . . . . . . . . . . . . . .  37
     3.8.  Creating a Certificate Management Message . . . . . . . .  38



Schaad, et al.               Standards Track                    [Page 3]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


     3.9.  Registration Requests . . . . . . . . . . . . . . . . . .  38
     3.10. Identifying an S/MIME Message . . . . . . . . . . . . . .  39
   4.  Certificate Processing  . . . . . . . . . . . . . . . . . . .  39
     4.1.  Key Pair Generation . . . . . . . . . . . . . . . . . . .  40
     4.2.  Signature Generation  . . . . . . . . . . . . . . . . . .  40
     4.3.  Signature Verification  . . . . . . . . . . . . . . . . .  40
     4.4.  Encryption  . . . . . . . . . . . . . . . . . . . . . . .  41
     4.5.  Decryption  . . . . . . . . . . . . . . . . . . . . . . .  41
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  41
     5.1.  Media Type for application/pkcs7-mime . . . . . . . . . .  42
     5.2.  Media Type for application/pkcs7-signature  . . . . . . .  43
     5.3.  authEnveloped-data smime-type . . . . . . . . . . . . . .  44
     5.4.  Reference Updates . . . . . . . . . . . . . . . . . . . .  44
   6.  Security Considerations . . . . . . . . . . . . . . . . . . .  44
   7.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  48
     7.1.  Reference Conventions . . . . . . . . . . . . . . . . . .  48
     7.2.  Normative References  . . . . . . . . . . . . . . . . . .  49
     7.3.  Informative References  . . . . . . . . . . . . . . . . .  52
   Appendix A.  ASN.1 Module . . . . . . . . . . . . . . . . . . . .  57
   Appendix B.  Historic Mail Considerations . . . . . . . . . . . .  59
     B.1.  DigestAlgorithmIdentifier . . . . . . . . . . . . . . . .  59
     B.2.  Signature Algorithms  . . . . . . . . . . . . . . . . . .  59
     B.3.  ContentEncryptionAlgorithmIdentifier  . . . . . . . . . .  61
     B.4.  KeyEncryptionAlgorithmIdentifier  . . . . . . . . . . . .  62
   Appendix C.  Moving S/MIME v2 Message Specification to Historic
                Status . . . . . . . . . . . . . . . . . . . . . . .  62
   Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . .  62
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  63























Schaad, et al.               Standards Track                    [Page 4]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


1.  Introduction

   S/MIME (Secure/Multipurpose Internet Mail Extensions) provides a
   consistent way to send and receive secure MIME data.  Based on the
   popular Internet MIME standard, S/MIME provides the following
   cryptographic security services for electronic messaging
   applications: authentication, message integrity, and non-repudiation
   of origin (using digital signatures), and data confidentiality (using
   encryption).  As a supplementary service, S/MIME provides message
   compression.

   S/MIME can be used by traditional mail user agents (MUAs) to add
   cryptographic security services to mail that is sent, and to
   interpret cryptographic security services in mail that is received.
   However, S/MIME is not restricted to mail; it can be used with any
   transport mechanism that transports MIME data, such as HTTP or SIP.
   As such, S/MIME takes advantage of the object-based features of MIME
   and allows secure messages to be exchanged in mixed-transport
   systems.

   Further, S/MIME can be used in automated message transfer agents that
   use cryptographic security services that do not require any human
   intervention, such as the signing of software-generated documents and
   the encryption of FAX messages sent over the Internet.

   This document defines version 4.0 of the S/MIME Message
   Specification.  As such, this document obsoletes version 3.2 of the
   S/MIME Message Specification [RFC5751].

   This specification contains a number of references to documents that
   have been obsoleted or replaced.  This is intentional, as the updated
   documents often do not have the same information or protocol
   requirements in them.

1.1.  Specification Overview

   This document describes a protocol for adding cryptographic signature
   and encryption services to MIME data.  The MIME standard [MIME-SPEC]
   provides a general structure for the content of Internet messages and
   allows extensions for new applications based on content-type.

   This specification defines how to create a MIME body part that has
   been cryptographically enhanced according to the Cryptographic
   Message Syntax (CMS) [CMS], which is derived from PKCS #7 [RFC2315].
   This specification also defines the application/pkcs7-mime media
   type, which can be used to transport those body parts.





Schaad, et al.               Standards Track                    [Page 5]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   This document also discusses how to use the multipart/signed media
   type defined in [RFC1847] to transport S/MIME signed messages.
   multipart/signed is used in conjunction with the
   application/pkcs7-signature media type, which is used to transport a
   detached S/MIME signature.

   In order to create S/MIME messages, an S/MIME agent MUST follow the
   specifications in this document, as well as the specifications listed
   in [CMS], [RFC3370], [RFC4056], [RFC3560], and [RFC5754].

   Throughout this specification, there are requirements and
   recommendations made for how receiving agents handle incoming
   messages.  There are separate requirements and recommendations for
   how sending agents create outgoing messages.  In general, the best
   strategy is to follow the Robustness Principle (be liberal in what
   you receive and conservative in what you send).  Most of the
   requirements are placed on the handling of incoming messages, while
   the recommendations are mostly on the creation of outgoing messages.

   The separation for requirements on receiving agents and sending
   agents also derives from the likelihood that there will be S/MIME
   systems that involve software other than traditional Internet mail
   clients.  S/MIME can be used with any system that transports MIME
   data.  An automated process that sends an encrypted message might not
   be able to receive an encrypted message at all, for example.  Thus,
   the requirements and recommendations for the two types of agents are
   listed separately when appropriate.

1.2.  Definitions

   For the purposes of this specification, the following definitions
   apply.

   ASN.1:
      Abstract Syntax Notation One, as defined in ITU-T Recommendations
      X.680, X.681, X.682, and X.683 [ASN.1].

   BER:
      Basic Encoding Rules for ASN.1, as defined in ITU-T Recommendation
      X.690 [X.690].

   Certificate:
      A type that binds an entity's name to a public key with a digital
      signature.

   DER:
      Distinguished Encoding Rules for ASN.1, as defined in ITU-T
      Recommendation X.690 [X.690].



Schaad, et al.               Standards Track                    [Page 6]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   7-bit data:
      Text data with lines less than 998 characters long, where none of
      the characters have the 8th bit set, and there are no NULL
      characters.  <CR> and <LF> occur only as part of a <CR><LF>
      end-of-line delimiter.

   8-bit data:
      Text data with lines less than 998 characters, and where none of
      the characters are NULL characters.  <CR> and <LF> occur only as
      part of a <CR><LF> end-of-line delimiter.

   Binary data:
      Arbitrary data.

   Transfer encoding:
      A reversible transformation made on data so 8-bit or binary data
      can be sent via a channel that only transmits 7-bit data.

   Receiving agent:
      Software that interprets and processes S/MIME CMS objects, MIME
      body parts that contain CMS content types, or both.

   Sending agent:
      Software that creates S/MIME CMS content types, MIME body parts
      that contain CMS content types, or both.

   S/MIME agent:
      User software that is a receiving agent, a sending agent, or both.

   Data integrity service:
      A security service that protects against unauthorized changes to
      data by ensuring that changes to the data are detectable
      [RFC4949].

   Data confidentiality:
      The property that data is not disclosed to system entities unless
      they have been authorized to know the data [RFC4949].

1.3.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.






Schaad, et al.               Standards Track                    [Page 7]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   We define the additional requirement levels:

   SHOULD+   This term means the same as SHOULD.  However, the authors
             expect that a requirement marked as SHOULD+ will be
             promoted at some future time to be a MUST.

   SHOULD-   This term means the same as SHOULD.  However, the authors
             expect that a requirement marked as SHOULD- will be demoted
             to a MAY in a future version of this document.

   MUST-     This term means the same as MUST.  However, the authors
             expect that this requirement will no longer be a MUST in a
             future document.  Although its status will be determined at
             a later time, it is reasonable to expect that if a future
             revision of a document alters the status of a MUST-
             requirement, it will remain at least a SHOULD or a SHOULD-.

   The term "RSA" in this document almost always refers to the
   PKCS #1 v1.5 RSA [RFC2313] signature or encryption algorithms even
   when not qualified as such.  There are a couple of places where it
   refers to the general RSA cryptographic operation; these can be
   determined from the context where it is used.

1.4.  Compatibility with Prior Practice of S/MIME

   S/MIME version 4.0 agents ought to attempt to have the greatest
   interoperability possible with agents for prior versions of S/MIME.

   -  S/MIME version 2 is described in RFC 2311 through RFC 2315
      inclusive [SMIMEv2].

   -  S/MIME version 3 is described in RFC 2630 through RFC 2634
      inclusive and RFC 5035 [SMIMEv3].

   -  S/MIME version 3.1 is described in RFC 2634, RFC 3850, RFC 3851,
      RFC 3852, and RFC 5035 [SMIMEv3.1].

   -  S/MIME version 3.2 is described in RFC 2634, RFC 5035, RFC 5652,
      RFC 5750, and RFC 5751 [SMIMEv3.2].

   -  [RFC2311] also has historical information about the development of
      S/MIME.









Schaad, et al.               Standards Track                    [Page 8]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


1.5.  Changes from S/MIME v3 to S/MIME v3.1

   This section describes the changes made between S/MIME v3 and
   S/MIME v3.1.  Note that the requirement levels indicated by the
   capitalized key words ("MUST", "SHOULD", etc.) may have changed in
   later versions of S/MIME.

   -  The RSA public key algorithm was changed to a MUST implement.  The
      key wrap algorithm and the Diffie-Hellman (DH) algorithm [RFC2631]
      were changed to a SHOULD implement.

   -  The AES symmetric encryption algorithm has been included as a
      SHOULD implement.

   -  The RSA public key algorithm was changed to a MUST implement
      signature algorithm.

   -  Ambiguous language about the use of "empty" SignedData messages to
      transmit certificates was clarified to reflect that transmission
      of Certificate Revocation Lists is also allowed.

   -  The use of binary encoding for some MIME entities is now
      explicitly discussed.

   -  Header protection through the use of the message/rfc822 media type
      has been added.

   -  Use of the CompressedData CMS type is allowed, along with required
      media type and file extension additions.

1.6.  Changes from S/MIME v3.1 to S/MIME v3.2

   This section describes the changes made between S/MIME v3.1 and
   S/MIME v3.2.  Note that the requirement levels indicated by the
   capitalized key words ("MUST", "SHOULD", etc.) may have changed in
   later versions of S/MIME.  Note that the section numbers listed here
   (e.g., 3.4.3.2) are from [RFC5751].

   -  Made editorial changes, e.g., replaced "MIME type" with "media
      type", "content-type" with "Content-Type".

   -  Moved "Conventions Used in This Document" to Section 1.3.  Added
      definitions for SHOULD+, SHOULD-, and MUST-.

   -  Section 1.1 and Appendix A: Added references to RFCs for
      RSASSA-PSS, RSAES-OAEP, and SHA2 CMS algorithms.  Added CMS
      Multiple Signers Clarification to CMS reference.




Schaad, et al.               Standards Track                    [Page 9]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   -  Section 1.2: Updated references to ASN.1 to X.680, and BER and DER
      to X.690.

   -  Section 1.4: Added references to S/MIME v3.1 RFCs.

   -  Section 2.1 (digest algorithm): SHA-256 added as MUST, SHA-1 and
      MD5 made SHOULD-.

   -  Section 2.2 (signature algorithms): RSA with SHA-256 added as
      MUST; DSA with SHA-256 added as SHOULD+; RSA with SHA-1, DSA with
      SHA-1, and RSA with MD5 changed to SHOULD-; and RSASSA-PSS with
      SHA-256 added as SHOULD+.  Also added note about what S/MIME v3.1
      clients support.

   -  Section 2.3 (key encryption): DH changed to SHOULD-, and RSAES-
      OAEP added as SHOULD+.  Elaborated on requirements for key wrap
      algorithm.

   -  Section 2.5.1: Added requirement that receiving agents MUST
      support both GeneralizedTime and UTCTime.

   -  Section 2.5.2: Replaced reference "sha1WithRSAEncryption" with
      "sha256WithRSAEncryption", replaced "DES-3EDE-CBC" with "AES-128
      CBC", and deleted the RC5 example.

   -  Section 2.5.2.1: Deleted entire section (discussed
      deprecated RC2).

   -  Section 2.7, Section 2.7.1, and Appendix A: References to RC2/40
      removed.

   -  Section 2.7 (content encryption): AES-128 CBC added as MUST,
      AES-192 and AES-256 CBC SHOULD+, and tripleDES now SHOULD-.

   -  Section 2.7.1: Updated pointers from 2.7.2.1 through 2.7.2.4 to
      2.7.1.1 and 2.7.1.2.

   -  Section 3.1.1: Removed text about MIME character sets.

   -  Sections 3.2.2 and 3.6: Replaced "encrypted" with "enveloped".
      Updated OID example to use AES-128 CBC OID.

   -  Section 3.4.3.2: Replaced "micalg" parameter for "SHA-1" with
      "sha-1".

   -  Section 4: Updated reference to CERT v3.2.





Schaad, et al.               Standards Track                   [Page 10]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   -  Section 4.1: Updated RSA and DSA key size discussion.  Moved last
      four sentences to security considerations.  Updated reference to
      randomness requirements for security.

   -  Section 5: Added IANA registration templates to update media type
      registry to point to this document as opposed to RFC 2311.

   -  Section 6: Updated security considerations.

   -  Section 7: Moved references from Appendix B to this section.
      Updated references.  Added informative references to SMIMEv2,
      SMIMEv3, and SMIMEv3.1.

   -  Appendix B: Added Appendix B to move S/MIME v2 to Historic status.

1.7.  Changes for S/MIME v4.0

   This section describes the changes made between S/MIME v3.2 and
   S/MIME v4.0.

   -  Added the use of AuthEnvelopedData, including defining and
      registering an smime-type value (Sections 2.4.4 and 3.4).

   -  Updated the content-encryption algorithms (Sections 2.7 and
      2.7.1.2): added AES-256 Galois/Counter Mode (GCM), added
      ChaCha20-Poly1305, removed mention of AES-192 Cipher Block
      Chaining (CBC), and marked tripleDES as historic.

   -  Updated the set of signature algorithms (Section 2.2): added the
      Edwards-curve Digital Signature Algorithm (EdDSA), added the
      Elliptic Curve Digital Signature Algorithm (ECDSA), and marked DSA
      as historic.

   -  Updated the set of digest algorithms (Section 2.1): added SHA-512,
      and marked SHA-1 as historic.

   -  Updated the size of keys to be used for RSA encryption and RSA
      signing (Section 4).

   -  Created Appendix B, which discusses considerations for dealing
      with historic email messages.










Schaad, et al.               Standards Track                   [Page 11]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


2.  CMS Options

   CMS allows for a wide variety of options in content, attributes, and
   algorithm support.  This section puts forth a number of support
   requirements and recommendations in order to achieve a base level of
   interoperability among all S/MIME implementations.  [RFC3370] and
   [RFC5754] provide additional details regarding the use of the
   cryptographic algorithms.  [ESS] provides additional details
   regarding the use of additional attributes.

2.1.  DigestAlgorithmIdentifier

   The algorithms here are used for digesting the body of the message
   and are not the same as the digest algorithms used as part of the
   signature algorithms.  The result of this is placed in the
   message-digest attribute of the signed attributes.  It is RECOMMENDED
   that the algorithm used for digesting the body of the message be of
   similar strength to, or greater strength than, the signature
   algorithm.

   Sending and receiving agents:

   -  MUST support SHA-256.

   -  MUST support SHA-512.

   [RFC5754] provides the details for using these algorithms with
   S/MIME.

2.2.  SignatureAlgorithmIdentifier

   There are different sets of requirements placed on receiving and
   sending agents.  By having the different requirements, the maximum
   amount of interoperability is achieved, as it allows for specialized
   protection of private key material but maximum signature validation.

   Receiving agents:

   -  MUST support ECDSA with curve P-256 and SHA-256.

   -  MUST support EdDSA with curve25519 using PureEdDSA mode [RFC8419].

   -  MUST- support RSA PKCS #1 v1.5 with SHA-256.

   -  SHOULD support the RSA Probabilistic Signature Scheme (RSASSA-PSS)
      with SHA-256.





Schaad, et al.               Standards Track                   [Page 12]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   Sending agents:

   -  MUST support at least one of the following algorithms: ECDSA with
      curve P-256 and SHA-256, or EdDSA with curve25519 using PureEdDSA
      mode.

   -  MUST- support RSA PKCS #1 v1.5 with SHA-256.

   -  SHOULD support RSASSA-PSS with SHA-256.

   See Section 4.1 for information on key size and algorithm references.

2.3.  KeyEncryptionAlgorithmIdentifier

   Receiving and sending agents:

   -  MUST support Elliptic Curve Diffie-Hellman (ECDH) ephemeral-static
      mode for P-256, as specified in [RFC5753].

   -  MUST support ECDH ephemeral-static mode for X25519 using HKDF-256
      ("HKDF" stands for "HMAC-based Key Derivation Function") for the
      KDF, as specified in [RFC8418].

   -  MUST- support RSA encryption, as specified in [RFC3370].

   -  SHOULD+ support RSA Encryption Scheme - Optimal Asymmetric
      Encryption Padding (RSAES-OAEP), as specified in [RFC3560].

   When ECDH ephemeral-static is used, a key wrap algorithm is also
   specified in the KeyEncryptionAlgorithmIdentifier [RFC5652].  The
   underlying encryption functions for the key wrap and content-
   encryption algorithms [RFC3370] [RFC3565] and the key sizes for the
   two algorithms MUST be the same (e.g., AES-128 key wrap algorithm
   with AES-128 content-encryption algorithm).  As both 128-bit and
   256-bit AES modes are mandatory to implement as content-encryption
   algorithms (Section 2.7), both the AES-128 and AES-256 key wrap
   algorithms MUST be supported when ECDH ephemeral-static is used.
   Recipients MAY enforce this but MUST use the weaker of the two as
   part of any cryptographic strength computations they might do.

   Appendix B provides information on algorithm support in older
   versions of S/MIME.

2.4.  General Syntax

   There are several CMS content types.  Of these, only the Data,
   SignedData, EnvelopedData, AuthEnvelopedData, and CompressedData
   content types are currently used for S/MIME.



Schaad, et al.               Standards Track                   [Page 13]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


2.4.1.  Data Content Type

   Sending agents MUST use the id-data content type identifier to
   identify the "inner" MIME message content.  For example, when
   applying a digital signature to MIME data, the CMS SignedData
   encapContentInfo eContentType MUST include the id-data object
   identifier (OID), and the media type MUST be stored in the SignedData
   encapContentInfo eContent OCTET STRING (unless the sending agent is
   using multipart/signed, in which case the eContent is absent, per
   Section 3.5.3 of this document).  As another example, when applying
   encryption to MIME data, the CMS EnvelopedData encryptedContentInfo
   contentType MUST include the id-data OID and the encrypted MIME
   content MUST be stored in the EnvelopedData encryptedContentInfo
   encryptedContent OCTET STRING.

2.4.2.  SignedData Content Type

   Sending agents MUST use the SignedData content type to apply a
   digital signature to a message or, in a degenerate case where there
   is no signature information, to convey certificates.  Applying a
   signature to a message provides authentication, message integrity,
   and non-repudiation of origin.

2.4.3.  EnvelopedData Content Type

   This content type is used to apply data confidentiality to a message.
   In order to distribute the symmetric key, a sender needs to have
   access to a public key for each intended message recipient to use
   this service.

2.4.4.  AuthEnvelopedData Content Type

   This content type is used to apply data confidentiality and message
   integrity to a message.  This content type does not provide
   authentication or non-repudiation.  In order to distribute the
   symmetric key, a sender needs to have access to a public key for each
   intended message recipient to use this service.

2.4.5.  CompressedData Content Type

   This content type is used to apply data compression to a message.
   This content type does not provide authentication, message integrity,
   non-repudiation, or data confidentiality; it is only used to reduce
   the message's size.

   See Section 3.7 for further guidance on the use of this type in
   conjunction with other CMS types.




Schaad, et al.               Standards Track                   [Page 14]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


2.5.  Attributes and the SignerInfo Type

   The SignerInfo type allows the inclusion of unsigned and signed
   attributes along with a signature.  These attributes can be required
   for the processing of messages (e.g., message digest), information
   the signer supplied (e.g., SMIME capabilities) that should be
   processed, or attributes that are not relevant to the current
   situation (e.g., mlExpansionHistory [RFC2634] for mail viewers).

   Receiving agents MUST be able to handle zero or one instance of each
   of the signed attributes listed here.  Sending agents SHOULD generate
   one instance of each of the following signed attributes in each
   S/MIME message:

   -  Signing time (Section 2.5.1 in this document)

   -  SMIME capabilities (Section 2.5.2 in this document)

   -  Encryption key Preference (Section 2.5.3 in this document)

   -  Message digest (Section 11.2 in [RFC5652])

   -  Content type (Section 11.1 in [RFC5652])

   Further, receiving agents SHOULD be able to handle zero or one
   instance of the signingCertificate and signingCertificateV2 signed
   attributes, as defined in Section 5 of RFC 2634 [ESS] and Section 3
   of RFC 5035 [ESS], respectively.

   Sending agents SHOULD generate one instance of the signingCertificate
   or signingCertificateV2 signed attribute in each SignerInfo
   structure.

   Additional attributes and values for these attributes might be
   defined in the future.  Receiving agents SHOULD handle attributes or
   values that they do not recognize in a graceful manner.

   Interactive sending agents that include signed attributes that are
   not listed here SHOULD display those attributes to the user, so that
   the user is aware of all of the data being signed.

2.5.1.  Signing Time Attribute

   The signingTime attribute is used to convey the time that a message
   was signed.  The time of signing will most likely be created by a
   signer and therefore is only as trustworthy as that signer.





Schaad, et al.               Standards Track                   [Page 15]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   Sending agents MUST encode signing time through the year 2049 as
   UTCTime; signing times in 2050 or later MUST be encoded as
   GeneralizedTime.  When the UTCTime CHOICE is used, S/MIME agents MUST
   interpret the year field (YY) as follows:

      If YY is greater than or equal to 50, the year is interpreted as
      19YY; if YY is less than 50, the year is interpreted as 20YY.

   Receiving agents MUST be able to process signingTime attributes that
   are encoded in either UTCTime or GeneralizedTime.

2.5.2.  SMIMECapabilities Attribute

   The SMIMECapabilities attribute includes signature algorithms (such
   as "sha256WithRSAEncryption"), symmetric algorithms (such as "AES-128
   CBC"), authenticated symmetric algorithms (such as "AES-128 GCM"),
   and key encipherment algorithms (such as "rsaEncryption").  The
   presence of an SMIMECapability attribute containing an algorithm
   implies that the sender can deal with the algorithm as well as
   understand the ASN.1 structures associated with that algorithm.
   There are also several identifiers that indicate support for other
   optional features such as binary encoding and compression.  The
   SMIMECapabilities attribute was designed to be flexible and
   extensible so that, in the future, a means of identifying other
   capabilities and preferences such as certificates can be added in a
   way that will not cause current clients to break.

   If present, the SMIMECapabilities attribute MUST be a
   SignedAttribute.  CMS defines SignedAttributes as a SET OF Attribute.
   The SignedAttributes in a signerInfo MUST include a single instance
   of the SMIMECapabilities attribute.  CMS defines the ASN.1 syntax for
   Attribute to include attrValues SET OF AttributeValue.  An
   SMIMECapabilities attribute MUST only include a single instance of
   AttributeValue.  If a signature is detected as violating these
   requirements, the signature SHOULD be treated as failing.

   The semantics of the SMIMECapabilities attribute specify a partial
   list as to what the client announcing the SMIMECapabilities can
   support.  A client does not have to list every capability it
   supports, and it need not list all its capabilities so that the
   capabilities list doesn't get too long.  In an SMIMECapabilities
   attribute, the OIDs are listed in order of their preference but
   SHOULD be separated logically along the lines of their categories
   (signature algorithms, symmetric algorithms, key encipherment
   algorithms, etc.).






Schaad, et al.               Standards Track                   [Page 16]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   The structure of the SMIMECapabilities attribute is to facilitate
   simple table lookups and binary comparisons in order to determine
   matches.  For instance, the encoding for the SMIMECapability for
   sha256WithRSAEncryption includes rather than omits the NULL
   parameter.  Because of the requirement for identical encoding,
   individuals documenting algorithms to be used in the
   SMIMECapabilities attribute SHOULD explicitly document the correct
   byte sequence for the common cases.

   For any capability, the associated parameters for the OID MUST
   specify all of the parameters necessary to differentiate between two
   instances of the same algorithm.

   The same OID that is used to identify an algorithm SHOULD also be
   used in the SMIMECapability for that algorithm.  There are cases
   where a single OID can correspond to multiple algorithms.  In these
   cases, a single algorithm MUST be assigned to the SMIMECapability
   using that OID.  Additional OIDs from the smimeCapabilities OID tree
   are then allocated for the other algorithms usages.  For instance, in
   an earlier specification, rsaEncryption was ambiguous because it
   could refer to either a signature algorithm or a key encipherment
   algorithm.  In the event that an OID is ambiguous, it needs to be
   arbitrated by the maintainer of the registered SMIMECapabilities list
   as to which type of algorithm will use the OID, and a new OID MUST be
   allocated under the smimeCapabilities OID to satisfy the other use of
   the OID.

   The registered SMIMECapabilities list specifies the parameters for
   OIDs that need them, most notably key lengths in the case of
   variable-length symmetric ciphers.  In the event that there are no
   differentiating parameters for a particular OID, the parameters MUST
   be omitted and MUST NOT be encoded as NULL.  Additional values for
   the SMIMECapabilities attribute might be defined in the future.
   Receiving agents MUST handle an SMIMECapabilities object that has
   values that it does not recognize in a graceful manner.

   Section 2.7.1 explains a strategy for caching capabilities.

2.5.3.  Encryption Key Preference Attribute

   The encryption key preference attribute allows the signer to
   unambiguously describe which of the signer's certificates has the
   signer's preferred encryption key.  This attribute is designed to
   enhance behavior for interoperating with those clients that use
   separate keys for encryption and signing.  This attribute is used to
   convey to anyone viewing the attribute which of the listed
   certificates is appropriate for encrypting a session key for future
   encrypted messages.



Schaad, et al.               Standards Track                   [Page 17]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   If present, the SMIMEEncryptionKeyPreference attribute MUST be a
   SignedAttribute.  CMS defines SignedAttributes as a SET OF Attribute.
   The SignedAttributes in a signerInfo MUST include a single instance
   of the SMIMEEncryptionKeyPreference attribute.  CMS defines the ASN.1
   syntax for Attribute to include attrValues SET OF AttributeValue.  An
   SMIMEEncryptionKeyPreference attribute MUST only include a single
   instance of AttributeValue.  If a signature is detected as violating
   these requirements, the signature SHOULD be treated as failing.

   The sending agent SHOULD include the referenced certificate in the
   set of certificates included in the signed message if this attribute
   is used.  The certificate MAY be omitted if it has been previously
   made available to the receiving agent.  Sending agents SHOULD use
   this attribute if the commonly used or preferred encryption
   certificate is not the same as the certificate used to sign the
   message.

   Receiving agents SHOULD store the preference data if the signature on
   the message is valid and the signing time is greater than the
   currently stored value.  (As with the SMIMECapabilities, the clock
   skew SHOULD be checked and the data not used if the skew is too
   great.)  Receiving agents SHOULD respect the sender's encryption key
   preference attribute if possible.  This, however, represents only a
   preference, and the receiving agent can use any certificate in
   replying to the sender that is valid.

   Section 2.7.1 explains a strategy for caching preference data.

2.5.3.1.  Selection of Recipient Key Management Certificate

   In order to determine the key management certificate to be used when
   sending a future CMS EnvelopedData message for a particular
   recipient, the following steps SHOULD be followed:

   -  If an SMIMEEncryptionKeyPreference attribute is found in a
      SignedData object received from the desired recipient, this
      identifies the X.509 certificate that SHOULD be used as the X.509
      key management certificate for the recipient.

   -  If an SMIMEEncryptionKeyPreference attribute is not found in a
      SignedData object received from the desired recipient, the set of
      X.509 certificates SHOULD be searched for an X.509 certificate
      with the same subject name as the signer of an X.509 certificate
      that can be used for key management.







Schaad, et al.               Standards Track                   [Page 18]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   -  Or, use some other method of determining the user's key management
      key.  If an X.509 key management certificate is not found, then
      encryption cannot be done with the signer of the message.  If
      multiple X.509 key management certificates are found, the S/MIME
      agent can make an arbitrary choice between them.

2.6.  SignerIdentifier SignerInfo Type

   S/MIME v4.0 implementations MUST support both issuerAndSerialNumber
   and subjectKeyIdentifier.  Messages that use the subjectKeyIdentifier
   choice cannot be read by S/MIME v2 clients.

   It is important to understand that some certificates use a value for
   subjectKeyIdentifier that is not suitable for uniquely identifying a
   certificate.  Implementations MUST be prepared for multiple
   certificates for potentially different entities to have the same
   value for subjectKeyIdentifier and MUST be prepared to try each
   matching certificate during signature verification before indicating
   an error condition.

2.7.  ContentEncryptionAlgorithmIdentifier

   Sending and receiving agents:

   -  MUST support encryption and decryption with AES-128 GCM and
      AES-256 GCM [RFC5084].

   -  MUST- support encryption and decryption with AES-128 CBC
      [RFC3565].

   -  SHOULD+ support encryption and decryption with ChaCha20-Poly1305
      [RFC7905].

2.7.1.  Deciding Which Encryption Method to Use

   When a sending agent creates an encrypted message, it has to decide
   which type of encryption to use.  The decision process involves using
   information garnered from the capabilities lists included in messages
   received from the recipient, as well as out-of-band information such
   as private agreements, user preferences, legal restrictions, and
   so on.

   Section 2.5.2 defines a method by which a sending agent can
   optionally announce, among other things, its decrypting capabilities
   in its order of preference.  The following method for processing and
   remembering the encryption capabilities attribute in incoming signed
   messages SHOULD be used.




Schaad, et al.               Standards Track                   [Page 19]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   -  If the receiving agent has not yet created a list of capabilities
      for the sender's public key, then, after verifying the signature
      on the incoming message and checking the timestamp, the receiving
      agent SHOULD create a new list containing at least the signing
      time and the symmetric capabilities.

   -  If such a list already exists, the receiving agent SHOULD verify
      that the signing time in the incoming message is greater than the
      signing time stored in the list and that the signature is valid.
      If so, the receiving agent SHOULD update both the signing time and
      capabilities in the list.  Values of the signing time that lie far
      in the future (that is, a greater discrepancy than any reasonable
      clock skew), or a capabilities list in messages whose signature
      could not be verified, MUST NOT be accepted.

   The list of capabilities SHOULD be stored for future use in creating
   messages.

   Before sending a message, the sending agent MUST decide whether it is
   willing to use weak encryption for the particular data in the
   message.  If the sending agent decides that weak encryption is
   unacceptable for this data, then the sending agent MUST NOT use a
   weak algorithm.  The decision to use or not use weak encryption
   overrides any other decision in this section about which encryption
   algorithm to use.

   Sections 2.7.1.1 and 2.7.1.2 describe the decisions a sending agent
   SHOULD use when choosing which type of encryption will be applied to
   a message.  These rules are ordered, so the sending agent SHOULD make
   its decision in the order given.

2.7.1.1.  Rule 1: Known Capabilities

   If the sending agent has received a set of capabilities from the
   recipient for the message the agent is about to encrypt, then the
   sending agent SHOULD use that information by selecting the first
   capability in the list (that is, the capability most preferred by the
   intended recipient) that the sending agent knows how to encrypt.  The
   sending agent SHOULD use one of the capabilities in the list if the
   agent reasonably expects the recipient to be able to decrypt the
   message.

2.7.1.2.  Rule 2: Unknown Capabilities, Unknown Version of S/MIME

   If the following two conditions are met, the sending agent SHOULD use
   AES-256 GCM, as AES-256 GCM is a stronger algorithm and is required
   by S/MIME v4.0:




Schaad, et al.               Standards Track                   [Page 20]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   -  The sending agent has no knowledge of the encryption capabilities
      of the recipient.

   -  The sending agent has no knowledge of the version of S/MIME used
      or supported by the recipient.

   If the sending agent chooses not to use AES-256 GCM in this step,
   given the presumption is that a client implementing AES-GCM would do
   both AES-256 and AES-128, it SHOULD use AES-128 CBC.

2.7.2.  Choosing Weak Encryption

   Algorithms such as RC2 are considered to be weak encryption
   algorithms.  Algorithms such as TripleDES are not state of the art
   and are considered to be weaker algorithms than AES.  A sending agent
   that is controlled by a human SHOULD allow a human sender to
   determine the risks of sending data using a weaker encryption
   algorithm before sending the data, and possibly allow the human to
   use a stronger encryption algorithm such as AES GCM or AES CBC even
   if there is a possibility that the recipient will not be able to
   process that algorithm.

2.7.3.  Multiple Recipients

   If a sending agent is composing an encrypted message to a group of
   recipients where the encryption capabilities of some of the
   recipients do not overlap, the sending agent is forced to send more
   than one message.  Please note that if the sending agent chooses to
   send a message encrypted with a strong algorithm and then send the
   same message encrypted with a weak algorithm, someone watching the
   communications channel could learn the contents of the strongly
   encrypted message simply by decrypting the weakly encrypted message.

3.  Creating S/MIME Messages

   This section describes the S/MIME message formats and how they are
   created.  S/MIME messages are a combination of MIME bodies and CMS
   content types.  Several media types as well as several CMS content
   types are used.  The data to be secured is always a canonical MIME
   entity.  The MIME entity and other data, such as certificates and
   algorithm identifiers, are given to CMS processing facilities that
   produce a CMS object.  Finally, the CMS object is wrapped in MIME.
   The "Enhanced Security Services for S/MIME" documents [ESS] provide
   descriptions of how nested, secured S/MIME messages are formatted.
   ESS provides a description of how a triple-wrapped S/MIME message is
   formatted using multipart/signed and application/pkcs7-mime for the
   signatures.




Schaad, et al.               Standards Track                   [Page 21]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   S/MIME provides one format for enveloped-only data, several formats
   for signed-only data, and several formats for signed and enveloped
   data.  Several formats are required to accommodate several
   environments -- in particular, for signed messages.  The criteria for
   choosing among these formats are also described.

   Anyone reading this section is expected to understand MIME as
   described in [MIME-SPEC] and [RFC1847].

3.1.  Preparing the MIME Entity for Signing, Enveloping, or Compressing

   S/MIME is used to secure MIME entities.  A MIME message is composed
   of a MIME header and a MIME body.  A body can consist of a single
   MIME entity or a tree of MIME entities (rooted with a multipart).
   S/MIME can be used to secure either a single MIME entity or a tree of
   MIME entities.  These entities can be in locations other than the
   root.  S/MIME can be applied multiple times to different entities in
   a single message.  A MIME entity that is the whole message includes
   only the MIME message headers and MIME body and does not include the
   rfc822 header.  Note that S/MIME can also be used to secure MIME
   entities used in applications other than Internet mail.  For cases
   where protection of the rfc822 header is required, the use of the
   message/rfc822 media type is explained later in this section.

   The MIME entity that is secured and described in this section can be
   thought of as the "inside" MIME entity.  That is, it is the
   "innermost" object in what is possibly a larger MIME message.
   Processing "outside" MIME entities into CMS EnvelopedData,
   CompressedData, and AuthEnvelopedData content types is described in
   Sections 3.2 and 3.5.  Other documents define additional CMS content
   types; those documents should be consulted for processing those CMS
   content types.

   The procedure for preparing a MIME entity is given in [MIME-SPEC].
   The same procedure is used here with some additional restrictions
   when signing.  The description of the procedures from [MIME-SPEC] is
   repeated here, but it is suggested that the reader refer to those
   documents for the exact procedures.  This section also describes
   additional requirements.

   A single procedure is used for creating MIME entities that are to
   have any combination of signing, enveloping, and compressing applied.
   Some additional steps are recommended to defend against known
   corruptions that can occur during mail transport that are of
   particular importance for clear-signing using the multipart/signed
   format.  It is recommended that these additional steps be performed
   on enveloped messages, or signed and enveloped messages, so that the
   messages can be forwarded to any environment without modification.



Schaad, et al.               Standards Track                   [Page 22]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   These steps are descriptive rather than prescriptive.  The
   implementer is free to use any procedure as long as the result is
   the same.

   Step 1.  The MIME entity is prepared according to local conventions.

   Step 2.  The leaf parts of the MIME entity are converted to
            canonical form.

   Step 3.  Appropriate transfer encoding is applied to the leaves
            of the MIME entity.

   When an S/MIME message is received, the security services on the
   message are processed, and the result is the MIME entity.  That MIME
   entity is typically passed to a MIME-capable user agent where it is
   further decoded and presented to the user or receiving application.

   In order to protect outer, non-content-related message header fields
   (for instance, the "Subject", "To", "From", and "Cc" fields), the
   sending client MAY wrap a full MIME message in a message/rfc822
   wrapper in order to apply S/MIME security services to these header
   fields.  It is up to the receiving client to decide how to present
   this "inner" header along with the unprotected "outer" header.  Given
   the security difference between headers, it is RECOMMENDED that the
   receiving client provide a distinction between header fields,
   depending on where they are located.

   When an S/MIME message is received, if the top-level protected MIME
   entity has a Content-Type of message/rfc822, it can be assumed that
   the intent was to provide header protection.  This entity SHOULD be
   presented as the top-level message, taking into account
   header-merging issues as previously discussed.

3.1.1.  Canonicalization

   Each MIME entity MUST be converted to a canonical form that is
   uniquely and unambiguously representable in the environment where the
   signature is created and the environment where the signature will be
   verified.  MIME entities MUST be canonicalized for enveloping and
   compressing as well as signing.

   The exact details of canonicalization depend on the actual media type
   and subtype of an entity and are not described here.  Instead, the
   standard for the particular media type SHOULD be consulted.  For
   example, canonicalization of type text/plain is different from
   canonicalization of audio/basic.  Other than text types, most types
   have only one representation, regardless of computing platform or
   environment, that can be considered their canonical representation.



Schaad, et al.               Standards Track                   [Page 23]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   In general, canonicalization will be performed by the non-security
   part of the sending agent rather than the S/MIME implementation.

   The most common and important canonicalization is for text, which is
   often represented differently in different environments.  MIME
   entities of major type "text" MUST have both their line endings and
   character set canonicalized.  The line ending MUST be the pair of
   characters <CR><LF>, and the charset SHOULD be a registered charset
   [CHARSETS].  The details of the canonicalization are specified in
   [MIME-SPEC].

   Note that some charsets such as ISO-2022 have multiple
   representations for the same characters.  When preparing such text
   for signing, the canonical representation specified for the charset
   MUST be used.

3.1.2.  Transfer Encoding

   When generating any of the secured MIME entities below, except the
   signing using the multipart/signed format, no transfer encoding is
   required at all.  S/MIME implementations MUST be able to deal with
   binary MIME objects.  If no Content-Transfer-Encoding header field is
   present, the transfer encoding is presumed to be 7BIT.

   As a rule, S/MIME implementations SHOULD use transfer encoding as
   described in Section 3.1.3 for all MIME entities they secure.  The
   reason for securing only 7-bit MIME entities, even for enveloped data
   that is not exposed to the transport, is that it allows the MIME
   entity to be handled in any environment without changing it.  For
   example, a trusted gateway might remove the envelope, but not the
   signature, of a message, and then forward the signed message on to
   the end recipient so that they can verify the signatures directly.
   If the transport internal to the site is not 8-bit clean, such as on
   a wide-area network with a single mail gateway, verifying the
   signature will not be possible unless the original MIME entity was
   only 7-bit data.

   In the case where S/MIME implementations can determine that all
   intended recipients are capable of handling inner (all but the
   outermost) binary MIME objects, implementations SHOULD use binary
   encoding as opposed to a 7-bit-safe transfer encoding for the inner
   entities.  The use of a 7-bit-safe encoding (such as base64)
   unnecessarily expands the message size.  Implementations MAY
   determine that recipient implementations are capable of
   handling inner binary MIME entities by (1) interpreting the
   id-cap-preferBinaryInside SMIMECapabilities attribute, (2) prior
   agreement, or (3) other means.




Schaad, et al.               Standards Track                   [Page 24]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   If one or more intended recipients are unable to handle inner binary
   MIME objects or if this capability is unknown for any of the intended
   recipients, S/MIME implementations SHOULD use transfer encoding as
   described in Section 3.1.3 for all MIME entities they secure.

3.1.3.  Transfer Encoding for Signing Using multipart/signed

   If a multipart/signed entity is ever to be transmitted over the
   standard Internet SMTP infrastructure or other transport that is
   constrained to 7-bit text, it MUST have transfer encoding applied so
   that it is represented as 7-bit text.  MIME entities that are already
   7-bit data need no transfer encoding.  Entities such as 8-bit text
   and binary data can be encoded with quoted-printable or base64
   transfer encoding.

   The primary reason for the 7-bit requirement is that the Internet
   mail transport infrastructure cannot guarantee transport of 8-bit or
   binary data.  Even though many segments of the transport
   infrastructure now handle 8-bit and even binary data, it is sometimes
   not possible to know whether the transport path is 8-bit clean.  If a
   mail message with 8-bit data were to encounter a message transfer
   agent that cannot transmit 8-bit or binary data, the agent has three
   options, none of which are acceptable for a clear-signed message:

   -  The agent could change the transfer encoding; this would
      invalidate the signature.

   -  The agent could transmit the data anyway, which would most likely
      result in the 8th bit being corrupted; this too would invalidate
      the signature.

   -  The agent could return the message to the sender.

   [RFC1847] prohibits an agent from changing the transfer encoding of
   the first part of a multipart/signed message.  If a compliant agent
   that cannot transmit 8-bit or binary data encountered a
   multipart/signed message with 8-bit or binary data in the first part,
   it would have to return the message to the sender as undeliverable.

3.1.4.  Sample Canonical MIME Entity

   This example shows a multipart/mixed message with full transfer
   encoding.  This message contains a text part and an attachment.  The
   sample message text includes characters that are not ASCII and thus
   need to be transfer encoded.  Though not shown here, the end of each
   line is <CR><LF>.  The line ending of the MIME headers, the text, and
   the transfer-encoded parts all MUST be <CR><LF>.




Schaad, et al.               Standards Track                   [Page 25]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   Note that this example is not an example of an S/MIME message.

   Content-Type: multipart/mixed; boundary=bar

   --bar
   Content-Type: text/plain; charset=iso-8859-1
   Content-Transfer-Encoding: quoted-printable

   =A1Hola Michael!

   How do you like the new S/MIME specification?

   It's generally a good idea to encode lines that begin with
   From=20because some mail transport agents will insert a
   greater-than (>) sign, thus invalidating the signature.

   Also, in some cases it might be desirable to encode any =20
   trailing whitespace that occurs on lines in order to ensure =20
   that the message signature is not invalidated when passing =20
   a gateway that modifies such whitespace (like BITNET). =20

   --bar
   Content-Type: image/jpeg
   Content-Transfer-Encoding: base64

   iQCVAwUBMJrRF2N9oWBghPDJAQE9UQQAtl7LuRVndBjrk4EqYBIb3h5QXIX/LC//
   jJV5bNvkZIGPIcEmI5iFd9boEgvpirHtIREEqLQRkYNoBActFBZmh9GC3C041WGq
   uMbrbxc+nIs1TIKlA08rVi9ig/2Yh7LFrK5Ein57U/W72vgSxLhe/zhdfolT9Brn
   HOxEa44b+EI=

   --bar--

3.2.  The application/pkcs7-mime Media Type

   The application/pkcs7-mime media type is used to carry CMS content
   types, including EnvelopedData, SignedData, and CompressedData.  The
   details of constructing these entities are described in subsequent
   sections.  This section describes the general characteristics of the
   application/pkcs7-mime media type.

   The carried CMS object always contains a MIME entity that is prepared
   as described in Section 3.1 if the eContentType is id-data.  Other
   contents MAY be carried when the eContentType contains different
   values.  See [ESS] for an example of this with signed receipts.

   Since CMS content types are binary data, in most cases base64
   transfer encoding is appropriate -- in particular, when used with
   SMTP transport.  The transfer encoding used depends on the transport



Schaad, et al.               Standards Track                   [Page 26]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   through which the object is to be sent and is not a characteristic of
   the media type.

   Note that this discussion refers to the transfer encoding of the CMS
   object or "outside" MIME entity.  It is completely distinct from, and
   unrelated to, the transfer encoding of the MIME entity secured by the
   CMS object -- the "inside" object, which is described in Section 3.1.

   Because there are several types of application/pkcs7-mime objects, a
   sending agent SHOULD do as much as possible to help a receiving agent
   know about the contents of the object without forcing the receiving
   agent to decode the ASN.1 for the object.  The Content-Type header
   field of all application/pkcs7-mime objects SHOULD include the
   optional "smime-type" parameter, as described in the following
   sections.

3.2.1.  The name and filename Parameters

   For application/pkcs7-mime, sending agents SHOULD emit the
   optional "name" parameter to the Content-Type field for compatibility
   with older systems.  Sending agents SHOULD also emit the optional
   Content-Disposition field [RFC2183] with the "filename" parameter.
   If a sending agent emits the above parameters, the value of the
   parameters SHOULD be a filename with the appropriate extension:

                                                                File
   Media Type                                                Extension
   -------------------------------------------------------------------
   application/pkcs7-mime (SignedData, EnvelopedData,           .p7m
      AuthEnvelopedData)
   application/pkcs7-mime (degenerate SignedData certificate    .p7c
      management message)
   application/pkcs7-mime (CompressedData)                      .p7z
   application/pkcs7-signature (SignedData)                     .p7s

   In addition, the filename SHOULD be limited to eight characters
   followed by a three-letter extension.  The eight-character filename
   base can be any distinct name; the use of the filename base "smime"
   SHOULD be used to indicate that the MIME entity is associated with
   S/MIME.

   Including a filename serves two purposes.  It facilitates easier use
   of S/MIME objects as files on disk.  It also can convey type
   information across gateways.  When a MIME entity of type
   application/pkcs7-mime (for example) arrives at a gateway that has no
   special knowledge of S/MIME, it will default the entity's media type
   to application/octet-stream and treat it as a generic attachment,
   thus losing the type information.  However, the suggested filename



Schaad, et al.               Standards Track                   [Page 27]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   for an attachment is often carried across a gateway.  This often
   allows the receiving systems to determine the appropriate application
   to hand the attachment off to -- in this case, a standalone S/MIME
   processing application.  Note that this mechanism is provided as a
   convenience for implementations in certain environments.  A proper
   S/MIME implementation MUST use the media types and MUST NOT rely on
   the file extensions.

3.2.2.  The smime-type Parameter

   The application/pkcs7-mime content type defines the optional
   "smime-type" parameter.  The intent of this parameter is to convey
   details about the security applied (signed or enveloped) along with
   information about the contained content.  This specification defines
   the following smime-types.

       Name                   CMS Type              Inner Content
       ----------------------------------------------------------
       enveloped-data         EnvelopedData         id-data
       signed-data            SignedData            id-data
       certs-only             SignedData            id-data
       compressed-data        CompressedData        id-data
       authEnveloped-data     AuthEnvelopedData     id-data

   In order for consistency to be obtained with future specifications,
   the following guidelines SHOULD be followed when assigning a new
   smime-type parameter.

   1.  If both signing and encryption can be applied to the content,
       then three values for smime-type SHOULD be assigned: "signed-*",
       "authEnv-*", and "enveloped-*".  If one operation can be
       assigned, then this can be omitted.  Thus, since "certs-only" can
       only be signed, "signed-" is omitted.

   2.  A common string for a content OID SHOULD be assigned.  We use
       "data" for the id-data content OID when MIME is the inner
       content.

   3.  If no common string is assigned, then the common string of
       "OID.<oid>" is recommended (for example,
       "OID.2.16.840.1.101.3.4.1.2" would be AES-128 CBC).

   It is explicitly intended that this field be a suitable hint for mail
   client applications to indicate whether a message is "signed",
   "authEnveloped", or "enveloped" without having to tunnel into the CMS
   payload.





Schaad, et al.               Standards Track                   [Page 28]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   A registry for additional smime-type parameter values has been
   defined in [RFC7114].

3.3.  Creating an Enveloped-Only Message

   This section describes the format for enveloping a MIME entity
   without signing it.  It is important to note that sending enveloped
   but not signed messages does not provide for data integrity.  The
   "enveloped-only" structure does not support authenticated symmetric
   algorithms.  Use the "authenticated enveloped" structure for these
   algorithms.  Thus, it is possible to replace ciphertext in such a way
   that the processed message will still be valid, but the meaning can
   be altered.

   Step 1.  The MIME entity to be enveloped is prepared according to
            Section 3.1.

   Step 2.  The MIME entity and other required data are processed into a
            CMS object of type EnvelopedData.  In addition to encrypting
            a copy of the content-encryption key (CEK) for each
            recipient, a copy of the CEK SHOULD be encrypted for the
            originator and included in the EnvelopedData (see [RFC5652],
            Section 6).

   Step 3.  The EnvelopedData object is wrapped in a CMS ContentInfo
            object.

   Step 4.  The ContentInfo object is inserted into an
            application/pkcs7-mime MIME entity.

   The smime-type parameter for enveloped-only messages is
   "enveloped-data".  The file extension for this type of message
   is ".p7m".

   A sample message would be:

   Content-Type: application/pkcs7-mime; name=smime.p7m;
      smime-type=enveloped-data
   Content-Transfer-Encoding: base64
   Content-Disposition: attachment; filename=smime.p7m

   MIIBHgYJKoZIhvcNAQcDoIIBDzCCAQsCAQAxgcAwgb0CAQAwJjASMRAwDgYDVQQDEw
   dDYXJsUlNBAhBGNGvHgABWvBHTbi7NXXHQMA0GCSqGSIb3DQEBAQUABIGAC3EN5nGI
   iJi2lsGPcP2iJ97a4e8kbKQz36zg6Z2i0yx6zYC4mZ7mX7FBs3IWg+f6KgCLx3M1eC
   bWx8+MDFbbpXadCDgO8/nUkUNYeNxJtuzubGgzoyEd8Ch4H/dd9gdzTd+taTEgS0ip
   dSJuNnkVY4/M652jKKHRLFf02hosdR8wQwYJKoZIhvcNAQcBMBQGCCqGSIb3DQMHBA
   gtaMXpRwZRNYAgDsiSf8Z9P43LrY4OxUk660cu1lXeCSFOSOpOJ7FuVyU=




Schaad, et al.               Standards Track                   [Page 29]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


3.4.  Creating an Authenticated Enveloped-Only Message

   This section describes the format for enveloping a MIME entity
   without signing it.  Authenticated enveloped messages provide
   confidentiality and data integrity.  It is important to note that
   sending authenticated enveloped messages does not provide for proof
   of origination when using S/MIME.  It is possible for a third party
   to replace ciphertext in such a way that the processed message will
   still be valid, but the meaning can be altered.  However, this is
   substantially more difficult than it is for an enveloped-only
   message, as the algorithm does provide a level of authentication.
   Any recipient for whom the message is encrypted can replace it
   without detection.

   Step 1.  The MIME entity to be enveloped is prepared according to
            Section 3.1.

   Step 2.  The MIME entity and other required data are processed into a
            CMS object of type AuthEnvelopedData.  In addition to
            encrypting a copy of the CEK for each recipient, a copy of
            the CEK SHOULD be encrypted for the originator and included
            in the AuthEnvelopedData (see [RFC5083]).

   Step 3.  The AuthEnvelopedData object is wrapped in a CMS ContentInfo
            object.

   Step 4.  The ContentInfo object is inserted into an
            application/pkcs7-mime MIME entity.

   The smime-type parameter for authenticated enveloped-only messages is
   "authEnveloped-data".  The file extension for this type of message
   is ".p7m".



















Schaad, et al.               Standards Track                   [Page 30]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   A sample message would be:

   Content-Type: application/pkcs7-mime; smime-type=authEnveloped-data;
      name=smime.p7m
   Content-Transfer-Encoding: base64
   Content-Disposition: attachment; filename=smime.p7m

   MIIDWQYLKoZIhvcNAQkQARegggNIMIIDRAIBADGBvjCBuwIBADAmMBIxEDAO
   BgNVBAMTB0NhcmxSU0ECEEY0a8eAAFa8EdNuLs1dcdAwCwYJKoZIhvcNAQEB
   BIGAgyZJo0ERTxA4xdTri5P5tVMyh0RARepTUCORZvlUbcUlaI8IpJZH3/J1
   Fv6MxTRS4O/K+ZcTlQmYeWLQvwdltQdOIP3mhpqXzTnOYhTK1IDtF2zx75Lg
   vE+ilpcLIzXfJB4RCBPtBWaHAof4Wb+VMQvLkk9OolX4mRSH1LPktgAwggJq
   BgkqhkiG9w0BBwEwGwYJYIZIAWUDBAEGMA4EDGPizioC9OHSsnNx4oCCAj7Y
   Cb8rOy8+55106newEJohC/aDgWbJhrMKzSOwa7JraXOV3HXD3NvKbl665dRx
   vmDwSCNaLCRU5q8/AxQx2SvnAbM+JKcEfC/VFdd4SiHNiUECAApLku2rMi5B
   WrhW/FXmx9d+cjum2BRwB3wj0q1wajdB0/kVRbQwg697dnlYyUog4vpJERjr
   7KAkawZx1RMHaM18wgZjUNpCBXFS3chQi9mTBp2i2Hf5iZ8OOtTx+rCQUmI6
   Jhy03vdcPCCARBjn3v0d3upZYDZddMA41CB9fKnnWFjadV1KpYwv80tqsEfx
   Vo0lJQ5VtJ8MHJiBpLVKadRIZ4iH2ULC0JtN5mXE1SrFKh7cqbJ4+7nqSRL3
   oBTud3rX41DGshOjpqcYHT4sqYlgZkc6dp0g1+hF1p3cGmjHdpysV2NVSUev
   ghHbvSqhIsXFzRSWKiZOigmlkv3R5LnjpYyP4brM62Jl7y0qborvV4dNMz7m
   D+5YxSlH0KAe8z6TT3LHuQdN7QCkFoiUSCaNhpAFaakkGIpqcqLhpOK4lXxt
   kptCG93eUwNCcTxtx6bXufPR5TUHohvZvfeqMp42kL37FJC/A8ZHoOxXy8+X
   X5QYxCQNuofWlvnIWv0Nr8w65x6lgVjPYmd/cHwzQKBTBMXN6pBud/PZL5zF
   tw3QHlQkBR+UflMWZKeN9L0KdQ27mQlCo5gQS85aifxoiiA2v9+0hxZw91rP
   IW4D+GS7oMMoKj8ZNyCJJsyf5smRZ+WxeBoolb3+TiGcBBCsRnfe6noLZiFO
   6Zeu2ZwE

3.5.  Creating a Signed-Only Message

   There are two formats for signed messages defined for S/MIME:

   -  application/pkcs7-mime with SignedData.

   -  multipart/signed.

   In general, the multipart/signed form is preferred for sending, and
   receiving agents MUST be able to handle both.













Schaad, et al.               Standards Track                   [Page 31]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


3.5.1.  Choosing a Format for Signed-Only Messages

   There are no hard-and-fast rules as to when a particular signed-only
   format is chosen.  It depends on the capabilities of all the
   receivers and the relative importance of receivers with S/MIME
   facilities being able to verify the signature versus the importance
   of receivers without S/MIME software being able to view the message.

   Messages signed using the multipart/signed format can always be
   viewed by the receiver whether or not they have S/MIME software.
   They can also be viewed whether they are using a MIME-native user
   agent or they have messages translated by a gateway.  In this
   context, "be viewed" means the ability to process the message
   essentially as if it were not a signed message, including any other
   MIME structure the message might have.

   Messages signed using the SignedData format cannot be viewed by a
   recipient unless they have S/MIME facilities.  However, the
   SignedData format protects the message content from being changed by
   benign intermediate agents.  Such agents might do line wrapping or
   content-transfer encoding changes that would break the signature.

3.5.2.  Signing Using application/pkcs7-mime with SignedData

   This signing format uses the application/pkcs7-mime media type.  The
   steps to create this format are as follows:

   Step 1.  The MIME entity is prepared according to Section 3.1.

   Step 2.  The MIME entity and other required data are processed into a
            CMS object of type SignedData.

   Step 3.  The SignedData object is wrapped in a CMS ContentInfo
            object.

   Step 4.  The ContentInfo object is inserted into an
            application/pkcs7-mime MIME entity.

   The smime-type parameter for messages using application/pkcs7-mime
   with SignedData is "signed-data".  The file extension for this type
   of message is ".p7m".










Schaad, et al.               Standards Track                   [Page 32]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   A sample message would be:

   Content-Type: application/pkcs7-mime; smime-type=signed-data;
      name=smime.p7m
   Content-Transfer-Encoding: base64
   Content-Disposition: attachment; filename=smime.p7m

   MIIDmQYJKoZIhvcNAQcCoIIDijCCA4YCAQExCTAHBgUrDgMCGjAtBgkqhkiG9w0BBw
   GgIAQeDQpUaGlzIGlzIHNvbWUgc2FtcGxlIGNvbnRlbnQuoIIC4DCCAtwwggKboAMC
   AQICAgDIMAkGByqGSM44BAMwEjEQMA4GA1UEAxMHQ2FybERTUzAeFw05OTA4MTcwMT
   EwNDlaFw0zOTEyMzEyMzU5NTlaMBMxETAPBgNVBAMTCEFsaWNlRFNTMIIBtjCCASsG
   ByqGSM44BAEwggEeAoGBAIGNze2D6gqeOT7CSCij5EeT3Q7XqA7sU8WrhAhP/5Thc0
   h+DNbzREjR/p+vpKGJL+HZMMg23j+bv7dM3F9piuR10DcMkQiVm96nXvn89J8v3UOo
   i1TxP7AHCEdNXYjDw7Wz41UIddU5dhDEeL3/nbCElzfy5FEbteQJllzzflvbAhUA4k
   emGkVmuBPG2o+4NyErYov3k80CgYAmONAUiTKqOfs+bdlLWWpMdiM5BAI1XPLLGjDD
   HlBd3ZtZ4s2qBT1YwHuiNrhuB699ikIlp/R1z0oIXks+kPht6pzJIYo7dhTpzi5dow
   fNI4W4LzABfG1JiRGJNkS9+MiVSlNWteL5c+waYTYfEX/Cve3RUP+YdMLRgUpgObo2
   OQOBhAACgYBc47ladRSWC6l63eM/qeysXty9txMRNKYWiSgRI9k0hmd1dRMSPUNbb+
   VRv/qJ8qIbPiR9PQeNW2PIu0WloErjhdbOBoA/6CN+GvIkq1MauCcNHu8Iv2YUgFxi
   rGX6FYvxuzTU0pY39mFHssQyhPB+QUD9RqdjTjPypeL08oPluKOBgTB/MAwGA1UdEw
   EB/wQCMAAwDgYDVR0PAQH/BAQDAgbAMB8GA1UdIwQYMBaAFHBEPoIub4feStN14z0g
   vEMrk/EfMB0GA1UdDgQWBBS+bKGz48H37UNwpM4TAeL945f+zTAfBgNVHREEGDAWgR
   RBbGljZURTU0BleGFtcGxlLmNvbTAJBgcqhkjOOAQDAzAAMC0CFFUMpBkfQiuJcSIz
   jYNqtT1na79FAhUAn2FTUlQLXLLd2ud2HeIQUltDXr0xYzBhAgEBMBgwEjEQMA4GA1
   UEAxMHQ2FybERTUwICAMgwBwYFKw4DAhowCQYHKoZIzjgEAwQuMCwCFD1cSW6LIUFz
   eXle3YI5SKSBer/sAhQmCq7s/CTFHOEjgASeUjbMpx5g6A==

3.5.3.  Signing Using the multipart/signed Format

   This format is a clear-signing format.  Recipients without any S/MIME
   or CMS processing facilities are able to view the message.  It makes
   use of the multipart/signed media type described in [RFC1847].  The
   multipart/signed media type has two parts.  The first part contains
   the MIME entity that is signed; the second part contains the
   "detached signature" CMS SignedData object in which the
   encapContentInfo eContent field is absent.

3.5.3.1.  The application/pkcs7-signature Media Type

   This media type always contains a CMS ContentInfo containing a single
   CMS object of type SignedData.  The SignedData encapContentInfo
   eContent field MUST be absent.  The signerInfos field contains the
   signatures for the MIME entity.

   The file extension for signed-only messages using
   application/pkcs7-signature is ".p7s".





Schaad, et al.               Standards Track                   [Page 33]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


3.5.3.2.  Creating a multipart/signed Message

   Step 1.  The MIME entity to be signed is prepared according to
            Section 3.1, taking special care for clear-signing.

   Step 2.  The MIME entity is presented to CMS processing in order to
            obtain an object of type SignedData in which the
            encapContentInfo eContent field is absent.

   Step 3.  The MIME entity is inserted into the first part of a
            multipart/signed message with no processing other than that
            described in Section 3.1.

   Step 4.  Transfer encoding is applied to the "detached signature" CMS
            SignedData object, and it is inserted into a MIME entity of
            type application/pkcs7-signature.

   Step 5.  The MIME entity of the application/pkcs7-signature is
            inserted into the second part of the multipart/signed
            entity.

   The multipart/signed Content-Type has two required parameters: the
   protocol parameter and the micalg parameter.

   The protocol parameter MUST be "application/pkcs7-signature".  Note
   that quotation marks are required around the protocol parameter
   because MIME requires that the "/" character in the parameter value
   MUST be quoted.























Schaad, et al.               Standards Track                   [Page 34]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   The micalg parameter allows for one-pass processing when the
   signature is being verified.  The value of the micalg parameter is
   dependent on the message digest algorithm(s) used in the calculation
   of the Message Integrity Check.  If multiple message digest
   algorithms are used, they MUST be separated by commas per [RFC1847].
   The values to be placed in the micalg parameter SHOULD be from the
   following:

        Algorithm      Value Used
        -----------------------------------------------------------
        MD5*           md5
        SHA-1*         sha-1
        SHA-224        sha-224
        SHA-256        sha-256
        SHA-384        sha-384
        SHA-512        sha-512
        Any other      (defined separately in the algorithm profile
                        or "unknown" if not defined)

   *Note: MD5 and SHA-1 are historical and no longer considered secure.
   See Appendix B for details.

   (Historical note: Some early implementations of S/MIME emitted and
   expected "rsa-md5", "rsa-sha1", and "sha1" for the micalg parameter.)
   Receiving agents SHOULD be able to recover gracefully from a micalg
   parameter value that they do not recognize.  Future values for this
   parameter will be taken from the IANA "Hash Function Textual Names"
   registry.























Schaad, et al.               Standards Track                   [Page 35]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


3.5.3.3.  Sample multipart/signed Message

   Content-Type: multipart/signed;
       micalg=sha-256;
       boundary="----=_NextBoundary____Fri,_06_Sep_2002_00:25:21";
       protocol="application/pkcs7-signature"

   This is a multipart message in MIME format.

   ------=_NextBoundary____Fri,_06_Sep_2002_00:25:21

   This is some sample content.
   ------=_NextBoundary____Fri,_06_Sep_2002_00:25:21
   Content-Type: application/pkcs7-signature; name=smime.p7s
   Content-Transfer-Encoding: base64
   Content-Disposition: attachment; filename=smime.p7s

   MIIBJgYJKoZIhvcNAQcCoIIBFzCCARMCAQExADALBgkqhkiG9w0BBwExgf4w
   gfsCAQIwJjASMRAwDgYDVQQDEwdDYXJsUlNBAhBGNGvHgABWvBHTbi7EELOw
   MAsGCWCGSAFlAwQCAaAxMC8GCSqGSIb3DQEJBDEiBCCxwpZGNZzTSsugsn+f
   lEidzQK4mf/ozKqfmbxhcIkKqjALBgkqhkiG9w0BAQsEgYB0XJV7fjPa5Nuh
   oth5msDfP8A5urYUMjhNpWgXG8ae3XpppqVrPi2nVO41onHnkByjkeD/wc31
   A9WH8MzFQgSTsrJ65JvffTTXkOpRPxsSHn3wJFwP/atWHkh8YK/jR9bULhUl
   Mv5jQEDiwVX5DRasxu6Ld8zv9u5/TsdBNiufGw==

   ------=_NextBoundary____Fri,_06_Sep_2002_00:25:21--

   The content that is digested (the first part of the multipart/signed)
   consists of the bytes:

   54 68 69 73 20 69 73 20 73 6f 6d 65 20 73 61 6d 70 6c 65 20 63 6f 6e
   74 65 6e 74 2e 0d 0a

3.6.  Creating a Compressed-Only Message

   This section describes the format for compressing a MIME entity.
   Please note that versions of S/MIME prior to version 3.1 did not
   specify any use of CompressedData and will not recognize it.  The use
   of a capability to indicate the ability to receive CompressedData is
   described in [RFC3274] and is the preferred method for compatibility.

   Step 1.  The MIME entity to be compressed is prepared according to
            Section 3.1.

   Step 2.  The MIME entity and other required data are processed into a
            CMS object of type CompressedData.





Schaad, et al.               Standards Track                   [Page 36]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   Step 3.  The CompressedData object is wrapped in a CMS ContentInfo
            object.

   Step 4.  The ContentInfo object is inserted into an
            application/pkcs7-mime MIME entity.

   The smime-type parameter for compressed-only messages is
   "compressed-data".  The file extension for this type of message
   is ".p7z".

   A sample message would be:

   Content-Type: application/pkcs7-mime; smime-type=compressed-data;
      name=smime.p7z
   Content-Transfer-Encoding: base64
   Content-Disposition: attachment; filename=smime.p7z

   eNoLycgsVgCi4vzcVIXixNyCnFSF5Py8ktS8Ej0AlCkKVA==

3.7.  Multiple Operations

   The signed-only, enveloped-only, and compressed-only MIME formats can
   be nested.  This works because these formats are all MIME entities
   that encapsulate other MIME entities.

   An S/MIME implementation MUST be able to receive and process
   arbitrarily nested S/MIME within reasonable resource limits of the
   recipient computer.

   It is possible to apply any of the signing, encrypting, and
   compressing operations in any order.  It is up to the implementer and
   the user to choose.  When signing first, the signatories are then
   securely obscured by the enveloping.  When enveloping first, the
   signatories are exposed, but it is possible to verify signatures
   without removing the enveloping.  This can be useful in an
   environment where automatic signature verification is desired, as no
   private key material is required to verify a signature.

   There are security ramifications related to choosing whether to sign
   first or encrypt first.  A recipient of a message that is encrypted
   and then signed can validate that the encrypted block was unaltered
   but cannot determine any relationship between the signer and the
   unencrypted contents of the message.  A recipient of a message that
   is signed and then encrypted can assume that the signed message
   itself has not been altered but that a careful attacker could have
   changed the unauthenticated portions of the encrypted message.





Schaad, et al.               Standards Track                   [Page 37]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   When using compression, keep the following guidelines in mind:

   -  Compression of encrypted data that is transferred as binary data
   is discouraged, since it will not yield significant compression.
   Encrypted data that is transferred as base64-encoded data could
   benefit as well.

   -  If a lossy compression algorithm is used with signing, you will
   need to compress first, then sign.

3.8.  Creating a Certificate Management Message

   The certificate management message or MIME entity is used to
   transport certificates and/or Certificate Revocation Lists (CRLs),
   such as in response to a registration request.

   Step 1.  The certificates and/or CRLs are made available to the CMS
            generating process that creates a CMS object of type
            SignedData.  The SignedData encapContentInfo eContent field
            MUST be absent, and the signerInfos field MUST be empty.

   Step 2.  The SignedData object is wrapped in a CMS ContentInfo
            object.

   Step 3.  The ContentInfo object is enclosed in an
            application/pkcs7-mime MIME entity.

   The smime-type parameter for a certificate management message is
   "certs-only".  The file extension for this type of message is ".p7c".

3.9.  Registration Requests

   A sending agent that signs messages MUST have a certificate for the
   signature so that a receiving agent can verify the signature.  There
   are many ways of getting certificates, such as through an exchange
   with a certification authority, through a hardware token or diskette,
   and so on.

   S/MIME v2 [SMIMEv2] specified a method for "registering" public keys
   with certificate authorities using an application/pkcs10 body part.
   Since that time, the IETF PKIX Working Group has developed other
   methods for requesting certificates.  However, S/MIME v4.0 does not
   require a particular certificate request mechanism.








Schaad, et al.               Standards Track                   [Page 38]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


3.10.  Identifying an S/MIME Message

   Because S/MIME takes into account interoperation in non-MIME
   environments, several different mechanisms are employed to carry the
   type information, and it becomes a bit difficult to identify S/MIME
   messages.  The following table lists criteria for determining whether
   or not a message is an S/MIME message.  A message is considered an
   S/MIME message if it matches any of the criteria listed below.

   The file suffix in the table below comes from the "name" parameter in
   the Content-Type header field or the "filename" parameter in the
   Content-Disposition header field.  The MIME parameters that carry the
   file suffix are not listed below.

   Media Type                 Parameters                     File Suffix
   ---------------------------------------------------------------------
   application/pkcs7-mime     N/A                            N/A

   multipart/signed           protocol=                      N/A
                              "application/pkcs7-signature"

   application/octet-stream   N/A                            p7m, p7s,
                                                             p7c, p7z

4.  Certificate Processing

   A receiving agent MUST provide some certificate retrieval mechanism
   in order to gain access to certificates for recipients of digital
   envelopes.  This specification does not cover how S/MIME agents
   handle certificates -- only what they do after a certificate has been
   validated or rejected.  S/MIME certificate issues are covered in
   [RFC5750].

   At a minimum, for initial S/MIME deployment, a user agent could
   automatically generate a message to an intended recipient requesting
   that recipient's certificate in a signed return message.  Receiving
   and sending agents SHOULD also provide a mechanism to allow a user to
   "store and protect" certificates for correspondents in such a way as
   to guarantee their later retrieval.












Schaad, et al.               Standards Track                   [Page 39]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


4.1.  Key Pair Generation

   All key pairs MUST be generated from a good source of
   non-deterministic random input [RFC4086], and the private key MUST be
   protected in a secure fashion.

   An S/MIME user agent MUST NOT generate asymmetric keys less than
   2048 bits for use with an RSA signature algorithm.

   For 2048-bit through 4096-bit RSA with SHA-256, see [RFC5754] and
   [FIPS186-4].  The first reference provides the signature algorithm's
   OID, and the second provides the signature algorithm's definition.

   For RSASSA-PSS with SHA-256, see [RFC4056].  For RSAES-OAEP, see
   [RFC3560].

4.2.  Signature Generation

   The following are the requirements for an S/MIME agent when
   generating RSA and RSASSA-PSS signatures:

           key size <= 2047 : SHOULD NOT (Note 2)
   2048 <= key size <= 4096 : SHOULD     (Note 1)
   4096 <  key size         : MAY        (Note 1)

   Note 1: See Security Considerations in Section 6.
   Note 2: See Historical Mail Considerations in Appendix B.

   Key sizes for ECDSA and EdDSA are fixed by the curve.

4.3.  Signature Verification

   The following are the requirements for S/MIME receiving agents during
   verification of RSA and RSASSA-PSS signatures:

           key size <= 2047 : SHOULD NOT (Note 2)
   2048 <= key size <= 4096 : MUST       (Note 1)
   4096 <  key size         : MAY        (Note 1)

   Note 1: See Security Considerations in Section 6.
   Note 2: See Historical Mail Considerations in Appendix B.

   Key sizes for ECDSA and EdDSA are fixed by the curve.








Schaad, et al.               Standards Track                   [Page 40]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


4.4.  Encryption

   The following are the requirements for an S/MIME agent when
   establishing keys for content encryption using the RSA and RSA-OAEP
   algorithms:

           key size <= 2047 : SHOULD NOT (Note 2)
   2048 <= key size <= 4096 : SHOULD     (Note 1)
   4096 <  key size         : MAY        (Note 1)

   Note 1: See Security Considerations in Section 6.
   Note 2: See Historical Mail Considerations in Appendix B.

   Key sizes for ECDH are fixed by the curve.

4.5.  Decryption

   The following are the requirements for an S/MIME agent when
   establishing keys for content decryption using the RSA and RSAES-OAEP
   algorithms:

           key size <= 2047 : MAY        (Note 2)
   2048 <= key size <= 4096 : MUST       (Note 1)
   4096 <  key size         : MAY        (Note 1)

   Note 1: See Security Considerations in Section 6.
   Note 2: See Historical Mail Considerations in Appendix B.

   Key sizes for ECDH are fixed by the curve.

5.  IANA Considerations

   This section (1) updates the media type registrations for
   application/pkcs7-mime and application/pkcs7-signature to refer to
   this document as opposed to RFC 5751, (2) adds authEnveloped-data to
   the list of values for smime-type, and (3) updates references from
   RFC 5751 to this document in general.

   Note that other documents can define additional media types for
   S/MIME.











Schaad, et al.               Standards Track                   [Page 41]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


5.1.  Media Type for application/pkcs7-mime

   Type name: application

   Subtype Name: pkcs7-mime

   Required Parameters: NONE

   Optional Parameters: smime-type
                        name

   Encoding Considerations: See Section 3 of this document

   Security Considerations: See Section 6 of this document

   Interoperability Considerations: See Sections 1-6 of this document

   Published Specification: RFC 2311, RFC 2633, RFC 5751,
                            and this document

   Applications that use this media type: Security applications

   Fragment identifier considerations: N/A

   Additional information:
       Deprecated alias names for this type: N/A
       Magic number(s): N/A
       File extensions(s): See Section 3.2.1 of this document
       Macintosh file type code(s): N/A

   Person & email address to contact for further information:
      The IESG <iesg@ietf.org>

   Intended usage: COMMON

   Restrictions on usage: NONE

   Author: Sean Turner

   Change Controller: LAMPS working group delegated from the IESG











Schaad, et al.               Standards Track                   [Page 42]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


5.2.  Media Type for application/pkcs7-signature

   Type name: application

   Subtype Name: pkcs7-signature

   Required Parameters: N/A

   Optional Parameters: N/A

   Encoding Considerations: See Section 3 of this document

   Security Considerations: See Section 6 of this document

   Interoperability Considerations: See Sections 1-6 of this document

   Published Specification: RFC 2311, RFC 2633, RFC 5751,
                            and this document

   Applications that use this media type: Security applications

   Fragment identifier considerations: N/A

   Additional information:
       Deprecated alias names for this type: N/A
       Magic number(s): N/A
       File extensions(s): See Section 3.2.1 of this document
       Macintosh file type code(s): N/A

   Person & email address to contact for further information:
      The IESG <iesg@ietf.org>

   Intended usage: COMMON

   Restrictions on usage: N/A

   Author: Sean Turner

   Change Controller: LAMPS working group delegated from the IESG












Schaad, et al.               Standards Track                   [Page 43]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


5.3.  authEnveloped-data smime-type

   IANA has registered the following value in the "Parameter Values for
   the smime-type Parameter" registry.

      smime-type value: authEnveloped-data

      Reference: RFC 8551, Section 3.2.2

5.4.  Reference Updates

   IANA is to update all references to RFC 5751 to this document.  Known
   registries to be updated are "CoAP Content-Formats" and "media-
   types".

6.  Security Considerations

   Cryptographic algorithms will be broken or weakened over time.
   Implementers and users need to check that the cryptographic
   algorithms listed in this document continue to provide the expected
   level of security.  The IETF from time to time may issue documents
   dealing with the current state of the art.  For example:

   -  The Million Message Attack described in RFC 3218 [RFC3218].

   -  The Diffie-Hellman "small-subgroup" attacks described in RFC 2785
      [RFC2785].

   -  The attacks against hash algorithms described in RFC 4270
      [RFC4270].

   This specification uses Public-Key Cryptography technologies.  It is
   assumed that the private key is protected to ensure that it is not
   accessed or altered by unauthorized parties.

   It is impossible for most people or software to estimate the value of
   a message's content.  Further, it is impossible for most people or
   software to estimate the actual cost of recovering an encrypted
   message's content that is encrypted with a key of a particular size.
   Further, it is quite difficult to determine the cost of a failed
   decryption if a recipient cannot process a message's content.  Thus,
   choosing between different key sizes (or choosing whether to just use
   plaintext) is also impossible for most people or software.  However,
   decisions based on these criteria are made all the time, and
   therefore this specification gives a framework for using those
   estimates in choosing algorithms.





Schaad, et al.               Standards Track                   [Page 44]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   The choice of 2048 bits as an RSA asymmetric key size in this
   specification is based on the desire to provide at least 100 bits of
   security.  The key sizes that must be supported to conform to this
   specification seem appropriate for the Internet, based on [RFC3766].
   Of course, there are environments, such as financial and medical
   systems, that may select different key sizes.  For this reason, an
   implementation MAY support key sizes beyond those recommended in this
   specification.

   Receiving agents that validate signatures and sending agents that
   encrypt messages need to be cautious of cryptographic processing
   usage when validating signatures and encrypting messages using keys
   larger than those mandated in this specification.  An attacker could
   send certificates with keys that would result in excessive
   cryptographic processing -- for example, keys larger than those
   mandated in this specification, as such keys could swamp the
   processing element.  Agents that use such keys without first
   validating the certificate to a trust anchor are advised to have some
   sort of cryptographic resource management system to prevent such
   attacks.

   Some cryptographic algorithms such as RC2 offer little actual
   security over sending plaintext.  Other algorithms such as TripleDES
   provide security but are no longer considered to be state of the art.
   S/MIME requires the use of current state-of-the-art algorithms such
   as AES and provides the ability to announce cryptographic
   capabilities to parties with whom you communicate.  This allows the
   sender to create messages that can use the strongest common
   encryption algorithm.  Using algorithms such as RC2 is never
   recommended unless the only alternative is no cryptography.

   RSA and DSA keys of less than 2048 bits are now considered by many
   experts to be cryptographically insecure (due to advances in
   computing power) and should no longer be used to protect messages.
   Such keys were previously considered secure, so processing previously
   received signed and encrypted mail will often result in the use of
   weak keys.  Implementations that wish to support previous versions of
   S/MIME or process old messages need to consider the security risks
   that result from smaller key sizes (e.g., spoofed messages) versus
   the costs of denial of service.  If an implementation supports
   verification of digital signatures generated with RSA and DSA keys of
   less than 1024 bits, it MUST warn the user.  Implementers should
   consider providing different warnings for newly received messages and
   previously stored messages.  Server implementations (e.g., secure
   mail list servers) where user warnings are not appropriate SHOULD
   reject messages with weak signatures.





Schaad, et al.               Standards Track                   [Page 45]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   Implementers SHOULD be aware that multiple active key pairs can be
   associated with a single individual.  For example, one key pair can
   be used to support confidentiality, while a different key pair can be
   used for digital signatures.

   If a sending agent is sending the same message using different
   strengths of cryptography, an attacker watching the communications
   channel might be able to determine the contents of the strongly
   encrypted message by decrypting the weakly encrypted version.  In
   other words, a sender SHOULD NOT send a copy of a message using
   weaker cryptography than they would use for the original of the
   message.

   Modification of the ciphertext in EnvelopedData can go undetected if
   authentication is not also used, which is the case when sending
   EnvelopedData without wrapping it in SignedData or enclosing
   SignedData within it.  This is one of the reasons for moving from
   EnvelopedData to AuthEnvelopedData, as the authenticated encryption
   algorithms provide the authentication without needing the SignedData
   layer.

   If an implementation is concerned about compliance with National
   Institute of Standards and Technology (NIST) key size
   recommendations, then see [SP800-57].

   If messaging environments make use of the fact that a message is
   signed to change the behavior of message processing (examples would
   be running rules or UI display hints), without first verifying that
   the message is actually signed and knowing the state of the
   signature, this can lead to incorrect handling of the message.
   Visual indicators on messages may need to have the signature
   validation code checked periodically if the indicator is supposed to
   give information on the current status of a message.

   Many people assume that the use of an authenticated encryption
   algorithm is all that is needed for the sender of the message to be
   authenticated.  In almost all cases, this is not a correct statement.
   There are a number of preconditions that need to hold for an
   authenticated encryption algorithm to provide this service:

   -  The starting key must be bound to a single entity.  The use of a
      group key only would allow for the statement that a message was
      sent by one of the entities that held the key but will not
      identify a specific entity.







Schaad, et al.               Standards Track                   [Page 46]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   -  The message must have exactly one sender and one recipient.
      Having more than one recipient would allow for the second
      recipient to create a message that the first recipient would
      believe is from the sender by stripping the second recipient from
      the message.

   -  A direct path needs to exist from the starting key to the key used
      as the CEK.  That path needs to guarantee that no third party
      could have seen the resulting CEK.  This means that one needs to
      be using an algorithm that is called a "Direct Encryption" or a
      "Direct Key Agreement" algorithm in other contexts.  This means
      that the starting key is (1) used directly as the CEK or (2) used
      to create a secret that is then transformed into the CEK via a
      KDF step.

   S/MIME implementations almost universally use ephemeral-static rather
   than static-static key agreement and do not use a shared secret for
   encryption.  This means that the first precondition is not met.
   [RFC6278] defines how to use static-static key agreement with CMS, so
   the first precondition can be met.  Currently, all S/MIME key
   agreement methods derive a key-encryption key (KEK) and wrap a CEK.
   This violates the third precondition above.  New key agreement
   algorithms that directly created the CEK without creating an
   intervening KEK would need to be defined.

   Even when all of the preconditions are met and origination of a
   message is established by the use of an authenticated encryption
   algorithm, users need to be aware that there is no way to prove this
   to a third party.  This is because either of the parties can
   successfully create the message (or just alter the content) based on
   the fact that the CEK is going to be known to both parties.  Thus,
   the origination is always built on a presumption that "I did not send
   this message to myself."

   All of the authenticated encryption algorithms in this document use
   counter mode for the encryption portion of the algorithm.  This means
   that the length of the plaintext will always be known, as the
   ciphertext length and the plaintext length are always the same.  This
   information can enable passive observers to infer information based
   solely on the length of the message.  Applications for which this is
   a concern need to provide some type of padding so that the length of
   the message does not provide this information.

   When compression is used with encryption, it has the potential to
   provide an additional layer of security.  However, care needs to be
   taken when designing a protocol that relies on using compression, so
   as not to create a compression oracle.  Compression oracle attacks
   require an adaptive input to the process and attack the unknown



Schaad, et al.               Standards Track                   [Page 47]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   content of a message based on the length of the compressed output.
   This means that no attack on the encryption key is necessarily
   required.

   A recent paper on S/MIME and OpenPGP email security [Efail] has
   pointed out a number of problems with the current S/MIME
   specifications and how people have implemented mail clients.  Due to
   the nature of how CBC mode operates, the modes allow for malleability
   of plaintexts.  This malleability allows for attackers to make
   changes in the ciphertext and, if parts of the plaintext are known,
   create arbitrary blocks of plaintext.  These changes can be made
   without the weak integrity check in CBC mode being triggered.  This
   type of attack can be prevented by the use of an Authenticated
   Encryption with Associated Data (AEAD) algorithm with a more robust
   integrity check on the decryption process.  It is therefore
   recommended that mail systems migrate to using AES-GCM as quickly as
   possible and that the decrypted content not be acted on prior to
   finishing the integrity check.

   The other attack that is highlighted in [Efail] is due to an error in
   how mail clients deal with HTML and multipart/mixed messages.
   Clients MUST require that a text/html content type be a complete HTML
   document (per [RFC1866]).  Clients SHOULD treat each of the different
   pieces of the multipart/mixed construct as being of different
   origins.  Clients MUST treat each encrypted or signed piece of a MIME
   message as being of different origins both from unprotected content
   and from each other.

7.  References

7.1.  Reference Conventions

   [ASN.1] refers to [X.680], [X.681], [X.682], and [X.683].

   [CMS] refers to [RFC5083] and [RFC5652].

   [ESS] refers to [RFC2634] and [RFC5035].

   [MIME-SPEC] refers to [RFC2045], [RFC2046], [RFC2047], [RFC2049],
   [RFC6838], and [RFC4289].

   [SMIMEv2] refers to [RFC2311], [RFC2312], [RFC2313], [RFC2314], and
   [RFC2315].

   [SMIMEv3] refers to [RFC2630], [RFC2631], [RFC2632], [RFC2633],
   [RFC2634], and [RFC5035].





Schaad, et al.               Standards Track                   [Page 48]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   [SMIMEv3.1] refers to [RFC2634], [RFC5035], [RFC5652], [RFC5750], and
   [RFC5751].

   [SMIMEv3.2] refers to [RFC2634], [RFC3850], [RFC3851], [RFC3852], and
   [RFC5035].

   [SMIMEv4] refers to [RFC2634], [RFC5035], [RFC5652], [RFC8550], and
   this document.

7.2.  Normative References

   [CHARSETS] IANA, "Character sets assigned by IANA",
              <http://www.iana.org/assignments/character-sets>.

   [FIPS186-4]
              National Institute of Standards and Technology (NIST),
              "Digital Signature Standard (DSS)", Federal Information
              Processing Standards Publication 186-4,
              DOI 10.6028/NIST.FIPS.186-4, July 2013,
              <https://nvlpubs.nist.gov/nistpubs/fips/
              nist.fips.186-4.pdf>.

   [RFC1847]  Galvin, J., Murphy, S., Crocker, S., and N. Freed,
              "Security Multiparts for MIME: Multipart/Signed and
              Multipart/Encrypted", RFC 1847, DOI 10.17487/RFC1847,
              October 1995, <https://www.rfc-editor.org/info/rfc1847>.

   [RFC2045]  Freed, N. and N. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part One: Format of Internet Message
              Bodies", RFC 2045, DOI 10.17487/RFC2045, November 1996,
              <https://www.rfc-editor.org/info/rfc2045>.

   [RFC2046]  Freed, N. and N. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part Two: Media Types", RFC 2046,
              DOI 10.17487/RFC2046, November 1996,
              <https://www.rfc-editor.org/info/rfc2046>.

   [RFC2047]  Moore, K., "MIME (Multipurpose Internet Mail Extensions)
              Part Three: Message Header Extensions for Non-ASCII Text",
              RFC 2047, DOI 10.17487/RFC2047, November 1996,
              <https://www.rfc-editor.org/info/rfc2047>.

   [RFC2049]  Freed, N. and N. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part Five: Conformance Criteria and
              Examples", RFC 2049, DOI 10.17487/RFC2049, November 1996,
              <https://www.rfc-editor.org/info/rfc2049>.





Schaad, et al.               Standards Track                   [Page 49]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC2183]  Troost, R., Dorner, S., and K. Moore, Ed., "Communicating
              Presentation Information in Internet Messages: The
              Content-Disposition Header Field", RFC 2183,
              DOI 10.17487/RFC2183, August 1997,
              <https://www.rfc-editor.org/info/rfc2183>.

   [RFC2634]  Hoffman, P., Ed., "Enhanced Security Services for S/MIME",
              RFC 2634, DOI 10.17487/RFC2634, June 1999,
              <https://www.rfc-editor.org/info/rfc2634>.

   [RFC3274]  Gutmann, P., "Compressed Data Content Type for
              Cryptographic Message Syntax (CMS)", RFC 3274,
              DOI 10.17487/RFC3274, June 2002,
              <https://www.rfc-editor.org/info/rfc3274>.

   [RFC3370]  Housley, R., "Cryptographic Message Syntax (CMS)
              Algorithms", RFC 3370, DOI 10.17487/RFC3370, August 2002,
              <https://www.rfc-editor.org/info/rfc3370>.

   [RFC3560]  Housley, R., "Use of the RSAES-OAEP Key Transport
              Algorithm in Cryptographic Message Syntax (CMS)",
              RFC 3560, DOI 10.17487/RFC3560, July 2003,
              <https://www.rfc-editor.org/info/rfc3560>.

   [RFC3565]  Schaad, J., "Use of the Advanced Encryption Standard (AES)
              Encryption Algorithm in Cryptographic Message Syntax
              (CMS)", RFC 3565, DOI 10.17487/RFC3565, July 2003,
              <https://www.rfc-editor.org/info/rfc3565>.

   [RFC4289]  Freed, N. and J. Klensin, "Multipurpose Internet Mail
              Extensions (MIME) Part Four: Registration Procedures",
              BCP 13, RFC 4289, DOI 10.17487/RFC4289, December 2005,
              <https://www.rfc-editor.org/info/rfc4289>.

   [RFC4056]  Schaad, J., "Use of the RSASSA-PSS Signature Algorithm in
              Cryptographic Message Syntax (CMS)", RFC 4056,
              DOI 10.17487/RFC4056, June 2005,
              <https://www.rfc-editor.org/info/rfc4056>.

   [RFC4086]  Eastlake 3rd, D., Schiller, J., and S. Crocker,
              "Randomness Requirements for Security", BCP 106, RFC 4086,
              DOI 10.17487/RFC4086, June 2005,
              <https://www.rfc-editor.org/info/rfc4086>.



Schaad, et al.               Standards Track                   [Page 50]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   [RFC5083]  Housley, R., "Cryptographic Message Syntax (CMS)
              Authenticated-Enveloped-Data Content Type", RFC 5083,
              DOI 10.17487/RFC5083, November 2007,
              <https://www.rfc-editor.org/info/rfc5083>.

   [RFC5084]  Housley, R., "Using AES-CCM and AES-GCM Authenticated
              Encryption in the Cryptographic Message Syntax (CMS)",
              RFC 5084, DOI 10.17487/RFC5084, November 2007,
              <https://www.rfc-editor.org/info/rfc5084>.

   [RFC5652]  Housley, R., "Cryptographic Message Syntax (CMS)", STD 70,
              RFC 5652, DOI 10.17487/RFC5652, September 2009,
              <https://www.rfc-editor.org/info/rfc5652>.

   [RFC5753]  Turner, S. and D. Brown, "Use of Elliptic Curve
              Cryptography (ECC) Algorithms in Cryptographic Message
              Syntax (CMS)", RFC 5753, DOI 10.17487/RFC5753,
              January 2010, <https://www.rfc-editor.org/info/rfc5753>.

   [RFC5754]  Turner, S., "Using SHA2 Algorithms with Cryptographic
              Message Syntax", RFC 5754, DOI 10.17487/RFC5754,
              January 2010, <https://www.rfc-editor.org/info/rfc5754>.

   [RFC6838]  Freed, N., Klensin, J., and T. Hansen, "Media Type
              Specifications and Registration Procedures", BCP 13,
              RFC 6838, DOI 10.17487/RFC6838, January 2013,
              <https://www.rfc-editor.org/info/rfc6838>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8418]  Housley, R., "Use of the Elliptic Curve Diffie-Hellman Key
              Agreement Algorithm with X25519 and X448 in the
              Cryptographic Message Syntax (CMS)", RFC 8418,
              DOI 10.17487/RFC8418, August 2018,
              <https://www.rfc-editor.org/info/rfc8418>.

   [RFC8419]  Housley, R., "Use of Edwards-Curve Digital Signature
              Algorithm (EdDSA) Signatures in the Cryptographic Message
              Syntax (CMS)", RFC 8419, DOI 10.17487/RFC8419,
              August 2018, <https://www.rfc-editor.org/info/rfc8419>.

   [RFC8550]  Schaad, J., Ramsdell, B., and S. Turner,
              "Secure/Multipurpose Internet Mail Extensions (S/MIME)
              Version 4.0 Certificate Handling", RFC 8550,
              DOI 10.17487/RFC8550, April 2019,
              <https://www.rfc-editor.org/info/rfc8550>.



Schaad, et al.               Standards Track                   [Page 51]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   [X.680]    "Information Technology - Abstract Syntax Notation One
              (ASN.1): Specification of basic notation", ITU-T
              Recommendation X.680, ISO/IEC 8824-1:2015, August 2015,
              <https://www.itu.int/rec/T-REC-X.680>.

   [X.681]    "Information Technology - Abstract Syntax Notation One
              (ASN.1): Information object specification", ITU-T
              Recommendation X.681, ISO/IEC 8824-2:2015, August 2015,
              <https://www.itu.int/rec/T-REC-X.681>.

   [X.682]    "Information Technology - Abstract Syntax Notation One
              (ASN.1): Constraint specification", ITU-T
              Recommendation X.682, ISO/IEC 8824-3:2015, August 2015,
              <https://www.itu.int/rec/T-REC-X.682>.

   [X.683]    "Information Technology - Abstract Syntax Notation One
              (ASN.1): Parameterization of ASN.1 specifications", ITU-T
              Recommendation X.683, ISO/IEC 8824-4:2015, August 2015,
              <https://www.itu.int/rec/T-REC-X.683>.

   [X.690]    "Information Technology - ASN.1 encoding rules:
              Specification of Basic Encoding Rules (BER), Canonical
              Encoding Rules (CER) and Distinguished Encoding Rules
              (DER)", ITU-T Recommendation X.690, ISO/IEC 8825-1:2015,
              August 2015, <https://www.itu.int/rec/T-REC-X.690>.

7.3.  Informative References

   [Efail]    Poddebniak, D., Dresen, C., Muller, J., Ising, F.,
              Schinzel, S., Friedberger, S., Somorovsky, J., and J.
              Schwenk, "Efail: Breaking S/MIME and OpenPGP Email
              Encryption using Exfiltration Channels",
              UsenixSecurity 2018, August 2018,
              <https://www.usenix.org/system/files/conference/
              usenixsecurity18/sec18-poddebniak.pdf>.

   [FIPS186-2]
              National Institute of Standards and Technology (NIST),
              "Digital Signature Standard (DSS) (also with Change
              Notice 1)", Federal Information Processing Standards
              Publication 186-2, January 2000,
              <https://csrc.nist.gov/publications/detail/fips/186/2/
              archive/2000-01-27>.

   [RFC1866]  Berners-Lee, T. and D. Connolly, "Hypertext Markup
              Language - 2.0", RFC 1866, DOI 10.17487/RFC1866,
              November 1995, <https://www.rfc-editor.org/info/rfc1866>.




Schaad, et al.               Standards Track                   [Page 52]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   [RFC2268]  Rivest, R., "A Description of the RC2(r) Encryption
              Algorithm", RFC 2268, DOI 10.17487/RFC2268, March 1998,
              <https://www.rfc-editor.org/info/rfc2268>.

   [RFC2311]  Dusse, S., Hoffman, P., Ramsdell, B., Lundblade, L., and
              L. Repka, "S/MIME Version 2 Message Specification",
              RFC 2311, DOI 10.17487/RFC2311, March 1998,
              <https://www.rfc-editor.org/info/rfc2311>.

   [RFC2312]  Dusse, S., Hoffman, P., Ramsdell, B., and J. Weinstein,
              "S/MIME Version 2 Certificate Handling", RFC 2312, DOI
              10.17487/RFC2312, March 1998,
              <https://www.rfc-editor.org/info/rfc2312>.

   [RFC2313]  Kaliski, B., "PKCS #1: RSA Encryption Version 1.5",
              RFC 2313, DOI 10.17487/RFC2313, March 1998,
              <https://www.rfc-editor.org/info/rfc2313>.

   [RFC2314]  Kaliski, B., "PKCS #10: Certification Request Syntax
              Version 1.5", RFC 2314, DOI 10.17487/RFC2314, March 1998,
              <https://www.rfc-editor.org/info/rfc2314>.

   [RFC2315]  Kaliski, B., "PKCS #7: Cryptographic Message Syntax
              Version 1.5", RFC 2315, DOI 10.17487/RFC2315, March 1998,
              <https://www.rfc-editor.org/info/rfc2315>.

   [RFC2630]  Housley, R., "Cryptographic Message Syntax", RFC 2630,
              DOI 10.17487/RFC2630, June 1999,
              <https://www.rfc-editor.org/info/rfc2630>.

   [RFC2631]  Rescorla, E., "Diffie-Hellman Key Agreement Method",
              RFC 2631, DOI 10.17487/RFC2631, June 1999,
              <https://www.rfc-editor.org/info/rfc2631>.

   [RFC2632]  Ramsdell, B., Ed., "S/MIME Version 3 Certificate
              Handling", RFC 2632, DOI 10.17487/RFC2632, June 1999,
              <https://www.rfc-editor.org/info/rfc2632>.

   [RFC2633]  Ramsdell, B., Ed., "S/MIME Version 3 Message
              Specification", RFC 2633, DOI 10.17487/RFC2633, June 1999,
              <https://www.rfc-editor.org/info/rfc2633>.

   [RFC2785]  Zuccherato, R., "Methods for Avoiding the "Small-Subgroup"
              Attacks on the Diffie-Hellman Key Agreement Method for
              S/MIME", RFC 2785, DOI 10.17487/RFC2785, March 2000,
              <https://www.rfc-editor.org/info/rfc2785>.





Schaad, et al.               Standards Track                   [Page 53]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   [RFC3218]  Rescorla, E., "Preventing the Million Message Attack on
              Cryptographic Message Syntax", RFC 3218,
              DOI 10.17487/RFC3218, January 2002,
              <https://www.rfc-editor.org/info/rfc3218>.

   [RFC3766]  Orman, H. and P. Hoffman, "Determining Strengths For
              Public Keys Used For Exchanging Symmetric Keys", BCP 86,
              RFC 3766, DOI 10.17487/RFC3766, April 2004,
              <https://www.rfc-editor.org/info/rfc3766>.

   [RFC3850]  Ramsdell, B., Ed., "Secure/Multipurpose Internet Mail
              Extensions (S/MIME) Version 3.1 Certificate Handling",
              RFC 3850, DOI 10.17487/RFC3850, July 2004,
              <https://www.rfc-editor.org/info/rfc3850>.

   [RFC3851]  Ramsdell, B., Ed., "Secure/Multipurpose Internet Mail
              Extensions (S/MIME) Version 3.1 Message Specification",
              RFC 3851, DOI 10.17487/RFC3851, July 2004,
              <https://www.rfc-editor.org/info/rfc3851>.

   [RFC3852]  Housley, R., "Cryptographic Message Syntax (CMS)",
              RFC 3852, DOI 10.17487/RFC3852, July 2004,
              <https://www.rfc-editor.org/info/rfc3852>.

   [RFC4134]  Hoffman, P., Ed., "Examples of S/MIME Messages", RFC 4134,
              DOI 10.17487/RFC4134, July 2005,
              <https://www.rfc-editor.org/info/rfc4134>.

   [RFC4270]  Hoffman, P. and B. Schneier, "Attacks on Cryptographic
              Hashes in Internet Protocols", RFC 4270,
              DOI 10.17487/RFC4270, November 2005,
              <https://www.rfc-editor.org/info/rfc4270>.

   [RFC4949]  Shirey, R., "Internet Security Glossary, Version 2",
              FYI 36, RFC 4949, DOI 10.17487/RFC4949, August 2007,
              <https://www.rfc-editor.org/info/rfc4949>.

   [RFC5035]  Schaad, J., "Enhanced Security Services (ESS) Update:
              Adding CertID Algorithm Agility", RFC 5035, DOI
              10.17487/RFC5035, August 2007,
              <https://www.rfc-editor.org/info/rfc5035>.

   [RFC5750]  Ramsdell, B. and S. Turner, "Secure/Multipurpose Internet
              Mail Extensions (S/MIME) Version 3.2 Certificate
              Handling", RFC 5750, DOI 10.17487/RFC5750, January 2010,
              <https://www.rfc-editor.org/info/rfc5750>.





Schaad, et al.               Standards Track                   [Page 54]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   [RFC5751]  Ramsdell, B. and S. Turner, "Secure/Multipurpose Internet
              Mail Extensions (S/MIME) Version 3.2 Message
              Specification", RFC 5751, DOI 10.17487/RFC5751,
              January 2010, <https://www.rfc-editor.org/info/rfc5751>.

   [RFC6151]  Turner, S. and L. Chen, "Updated Security Considerations
              for the MD5 Message-Digest and the HMAC-MD5 Algorithms",
              RFC 6151, DOI 10.17487/RFC6151, March 2011,
              <https://www.rfc-editor.org/info/rfc6151>.

   [RFC6194]  Polk, T., Chen, L., Turner, S., and P. Hoffman, "Security
              Considerations for the SHA-0 and SHA-1 Message-Digest
              Algorithms", RFC 6194, DOI 10.17487/RFC6194, March 2011,
              <https://www.rfc-editor.org/info/rfc6194>.

   [RFC6268]  Schaad, J. and S. Turner, "Additional New ASN.1 Modules
              for the Cryptographic Message Syntax (CMS) and the Public
              Key Infrastructure Using X.509 (PKIX)", RFC 6268,
              DOI 10.17487/RFC6268, July 2011,
              <https://www.rfc-editor.org/info/rfc6268>.

   [RFC6278]  Herzog, J. and R. Khazan, "Use of Static-Static Elliptic
              Curve Diffie-Hellman Key Agreement in Cryptographic
              Message Syntax", RFC 6278, DOI 10.17487/RFC6278,
              June 2011, <https://www.rfc-editor.org/info/rfc6278>.

   [RFC7114]  Leiba, B., "Creation of a Registry for smime-type
              Parameter Values", RFC 7114, DOI 10.17487/RFC7114,
              January 2014, <https://www.rfc-editor.org/info/rfc7114>.

   [RFC7905]  Langley, A., Chang, W., Mavrogiannopoulos, N.,
              Strombergson, J., and S. Josefsson, "ChaCha20-Poly1305
              Cipher Suites for Transport Layer Security (TLS)",
              RFC 7905, DOI 10.17487/RFC7905, June 2016,
              <https://www.rfc-editor.org/info/rfc7905>.

   [SP800-56A]
              National Institute of Standards and Technology (NIST),
              "Recommendation for Pair-Wise Key Establishment Schemes
              Using Discrete Logarithm Cryptography", NIST Special
              Publication 800-56A Revision 2,
              DOI 10.6028/NIST.SP.800-56Ar2, May 2013,
              <https://nvlpubs.nist.gov/nistpubs/SpecialPublications/
              NIST.SP.800-56Ar2.pdf>.







Schaad, et al.               Standards Track                   [Page 55]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   [SP800-57] National Institute of Standards and Technology (NIST),
              "Recommendation for Key Management - Part 1: General",
              NIST Special Publication 800-57 Revision 4,
              DOI 10.6028/NIST.SP.800-57pt1r4, January 2016,
              <https://nvlpubs.nist.gov/nistpubs/SpecialPublications/
              NIST.SP.800-57pt1r4.pdf>.

   [TripleDES]
              Tuchman, W., "Hellman Presents No Shortcut Solutions to
              the DES", IEEE Spectrum v. 16, n. 7, pp. 40-41,
              DOI 10.1109/MSPEC.1979.6368160, July 1979.








































Schaad, et al.               Standards Track                   [Page 56]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


Appendix A.  ASN.1 Module

   Note: The ASN.1 module contained herein is unchanged from RFC 5751
   [SMIMEv2] and RFC 3851 [SMIMEv3.1], with the exception of a change to
   the preferBinaryInside ASN.1 comment in RFC 3851 [SMIMEv3.1].  If a
   module is needed that is compatible with current ASN.1 standards, one
   can be found in [RFC6268].  This module uses the 1988 version
   of ASN.1.

   SecureMimeMessageV3dot1

     { iso(1) member-body(2) us(840) rsadsi(113549)
            pkcs(1) pkcs-9(9) smime(16) modules(0) msg-v3dot1(21) }

   DEFINITIONS IMPLICIT TAGS ::=

   BEGIN

   IMPORTS

   -- Cryptographic Message Syntax [CMS]
      SubjectKeyIdentifier, IssuerAndSerialNumber,
      RecipientKeyIdentifier
          FROM  CryptographicMessageSyntax
                { iso(1) member-body(2) us(840) rsadsi(113549)
                  pkcs(1) pkcs-9(9) smime(16) modules(0) cms-2001(14) };

   -- id-aa is the arc with all new authenticated and unauthenticated
   -- attributes produced by the S/MIME Working Group.

   id-aa OBJECT IDENTIFIER ::= {iso(1) member-body(2) usa(840)
           rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) attributes(2)}

   -- S/MIME Capabilities provides a method of broadcasting the
   -- symmetric capabilities understood.  Algorithms SHOULD be ordered
   -- by preference and grouped by type.

   smimeCapabilities OBJECT IDENTIFIER ::= {iso(1) member-body(2)
           us(840) rsadsi(113549) pkcs(1) pkcs-9(9) 15}

   SMIMECapability ::= SEQUENCE {
      capabilityID OBJECT IDENTIFIER,
      parameters ANY DEFINED BY capabilityID OPTIONAL }

   SMIMECapabilities ::= SEQUENCE OF SMIMECapability

   -- Encryption Key Preference provides a method of broadcasting the
   -- preferred encryption certificate.



Schaad, et al.               Standards Track                   [Page 57]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   id-aa-encrypKeyPref OBJECT IDENTIFIER ::= {id-aa 11}

   SMIMEEncryptionKeyPreference ::= CHOICE {
      issuerAndSerialNumber   [0] IssuerAndSerialNumber,
      receipentKeyId          [1] RecipientKeyIdentifier,
      subjectAltKeyIdentifier [2] SubjectKeyIdentifier
   }

   -- "receipentKeyId" is spelled incorrectly but is kept for
   -- historical reasons.

   id-smime OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840)
           rsadsi(113549) pkcs(1) pkcs-9(9) 16 }

   id-cap  OBJECT IDENTIFIER ::= { id-smime 11 }

   -- The preferBinaryInside OID indicates an ability to receive
   -- messages with binary encoding inside the CMS wrapper.
   -- The preferBinaryInside attribute's value field is ABSENT.

   id-cap-preferBinaryInside  OBJECT IDENTIFIER ::= { id-cap 1 }

   -- The following is a list of OIDs to be used with S/MIME v3.

   -- Signature Algorithms Not Found in [RFC3370], [RFC5754], [RFC4056],
   -- and [RFC3560]

   --
   -- md2WithRSAEncryption OBJECT IDENTIFIER ::=
   --    {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-1(1)
   --     2}

   --
   -- Other Signed Attributes
   --
   -- signingTime OBJECT IDENTIFIER ::=
   --    {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9)
   --     5}
   --    See [CMS] for a description of how to encode the attribute
   --    value.

   SMIMECapabilitiesParametersForRC2CBC ::= INTEGER
   --        (RC2 Key Length (number of bits))

   END






Schaad, et al.               Standards Track                   [Page 58]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


Appendix B.  Historic Mail Considerations

   Over the course of updating the S/MIME specifications, the set of
   recommended algorithms has been modified each time the documents have
   been updated.  This means that if a user has historic emails and
   their user agent has been updated to only support the current set of
   recommended algorithms, some of those old emails will no longer be
   accessible.  It is strongly suggested that user agents implement some
   of the following algorithms for dealing with historic emails.

   This appendix contains a number of references to documents that have
   been obsoleted or replaced.  This is intentional, as the updated
   documents often do not have the same information in them.

B.1.  DigestAlgorithmIdentifier

   The following algorithms have been called out for some level of
   support by previous S/MIME specifications:

   -  SHA-1 was dropped in [SMIMEv4].  SHA-1 is no longer considered to
      be secure, as it is no longer collision resistant.  The IETF
      statement on SHA-1 can be found in [RFC6194], but it is out of
      date relative to the most recent advances.

   -  MD5 was dropped in [SMIMEv4].  MD5 is no longer considered to be
      secure, as it is no longer collision resistant.  Details can be
      found in [RFC6151].

B.2.  Signature Algorithms

   There are a number of problems with validating signatures on
   sufficiently historic messages.  For this reason, it is strongly
   suggested that user agents treat these signatures differently from
   those on current messages.  These problems include the following:

   -  Certification authorities are not required to keep certificates on
      a CRL beyond one update after a certificate has expired.  This
      means that unless CRLs are cached as part of the message it is not
      always possible to check to see if a certificate has been revoked.
      The same problems exist with Online Certificate Status Protocol
      (OCSP) responses, as they may be based on a CRL rather than on the
      certificate database.









Schaad, et al.               Standards Track                   [Page 59]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   -  RSA and DSA keys of less than 2048 bits are now considered by many
      experts to be cryptographically insecure (due to advances in
      computing power).  Such keys were previously considered secure, so
      the processing of historic signed messages will often result in
      the use of weak keys.  Implementations that wish to support
      previous versions of S/MIME or process old messages need to
      consider the security risks that result from smaller key sizes
      (e.g., spoofed messages) versus the costs of denial of service.

      [SMIMEv3.1] set the lower limit on suggested key sizes for
      creating and validation at 1024 bits.  Prior to that, the lower
      bound on key sizes was 512 bits.

   -  Hash functions used to validate signatures on historic messages
      may no longer be considered to be secure (see below).  While there
      are not currently any known practical pre-image or second
      pre-image attacks against MD5 or SHA-1, the fact that they are no
      longer considered to be collision resistant implies that the
      security levels of the signatures are generally considered
      suspect.  If a message is known to be historic and it has been in
      the possession of the client for some time, then it might still be
      considered to be secure.

   -  The previous two issues apply to the certificates used to validate
      the binding of the public key to the identity that signed the
      message as well.

   The following algorithms have been called out for some level of
   support by previous S/MIME specifications:

   -  RSA with MD5 was dropped in [SMIMEv4].  MD5 is no longer
      considered to be secure, as it is no longer collision resistant.
      Details can be found in [RFC6151].

   -  RSA and DSA with SHA-1 were dropped in [SMIMEv4].  SHA-1 is no
      longer considered to be secure, as it is no longer collision
      resistant.  The IETF statement on SHA-1 can be found in [RFC6194],
      but it is out of date relative to the most recent advances.

   -  DSA with SHA-256 was dropped in [SMIMEv4].  DSA has been replaced
      by elliptic curve versions.










Schaad, et al.               Standards Track                   [Page 60]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


   As requirements for "mandatory to implement" have changed over time,
   some issues have been created that can cause interoperability
   problems:

   -  S/MIME v2 clients are only required to verify digital signatures
      using the rsaEncryption algorithm with SHA-1 or MD5 and might not
      implement id-dsa-with-sha1 or id-dsa at all.

   -  S/MIME v3 clients might only implement signing or signature
      verification using id-dsa-with-sha1 and might also use id-dsa as
      an AlgorithmIdentifier in this field.

   -  Note that S/MIME v3.1 clients support verifying id-dsa-with-sha1
      and rsaEncryption and might not implement sha256WithRSAEncryption.

   NOTE: Receiving clients SHOULD recognize id-dsa as equivalent to
   id-dsa-with-sha1.

   For 512-bit RSA with SHA-1, see [RFC3370] and [FIPS186-2] without
   Change Notice 1; for 512-bit RSA with SHA-256, see [RFC5754] and
   [FIPS186-2] without Change Notice 1; and for 1024-bit through
   2048-bit RSA with SHA-256, see [RFC5754] and [FIPS186-2] with Change
   Notice 1.  The first reference provides the signature algorithm's
   OID, and the second provides the signature algorithm's definition.

   For 512-bit DSA with SHA-1, see [RFC3370] and [FIPS186-2] without
   Change Notice 1; for 512-bit DSA with SHA-256, see [RFC5754] and
   [FIPS186-2] without Change Notice 1; for 1024-bit DSA with SHA-1, see
   [RFC3370] and [FIPS186-2] with Change Notice 1; and for 1024-bit and
   above DSA with SHA-256, see [RFC5754] and [FIPS186-4].  The first
   reference provides the signature algorithm's OID, and the second
   provides the signature algorithm's definition.

B.3.  ContentEncryptionAlgorithmIdentifier

   The following algorithms have been called out for some level of
   support by previous S/MIME specifications:

   -  RC2/40 [RFC2268] was dropped in [SMIMEv3.2].  The algorithm is
      known to be insecure and, if supported, should only be used to
      decrypt existing email.

   -  DES EDE3 CBC [TripleDES], also known as "tripleDES", was dropped
      in [SMIMEv4].  This algorithm is removed from the list of
      supported algorithms because (1) it has a 64-bit block size and
      (2) it offers less than 128 bits of security.  This algorithm
      should be supported only to decrypt existing email; it should not
      be used to encrypt new emails.



Schaad, et al.               Standards Track                   [Page 61]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


B.4.  KeyEncryptionAlgorithmIdentifier

   The following algorithms have been called out for some level of
   support by previous S/MIME specifications:

   -  DH ephemeral-static mode, as specified in [RFC3370] and
      [SP800-57], was dropped in [SMIMEv4].

   -  RSA key sizes have been increased over time.  Decrypting old mail
      with smaller key sizes is reasonable; however, new mail should use
      the updated key sizes.

   For 1024-bit DH, see [RFC3370].  For 1024-bit and larger DH, see
   [SP800-56A]; regardless, use the KDF, which is from X9.42, specified
   in [RFC3370].

Appendix C.  Moving S/MIME v2 Message Specification to Historic Status

   The S/MIME v3 [SMIMEv3], v3.1 [SMIMEv3.1], and v3.2 [SMIMEv3.2]
   specifications are backward compatible with the S/MIME v2 Message
   Specification [SMIMEv2], with the exception of the algorithms
   (dropped RC2/40 requirement and added DSA and RSASSA-PSS
   requirements).  Therefore, RFC 2311 [SMIMEv2] was moved to Historic
   status.

Acknowledgements

   Many thanks go out to the other authors of the S/MIME version 2
   Message Specification RFC: Steve Dusse, Paul Hoffman, Laurence
   Lundblade, and Lisa Repka.  Without v2, there wouldn't be a v3, v3.1,
   v3.2, or v4.0.

   Some of the examples in this document were copied from [RFC4134].
   Thanks go to the people who wrote and verified the examples in that
   document.

   A number of the members of the S/MIME Working Group have also worked
   very hard and contributed to this document.  Any list of people is
   doomed to omission, and for that I apologize.  In alphabetical order,
   the following people stand out in my mind because they made direct
   contributions to this document:

   Tony Capel, Piers Chivers, Dave Crocker, Bill Flanigan, Peter
   Gutmann, Alfred Hoenes, Paul Hoffman, Russ Housley, William Ottaway,
   and John Pawling.

   The version 4 update to the S/MIME documents was done under the
   auspices of the LAMPS Working Group.



Schaad, et al.               Standards Track                   [Page 62]

RFC 8551            S/MIME 4.0 Message Specification          April 2019


Authors' Addresses

   Jim Schaad
   August Cellars

   Email: ietf@augustcellars.com


   Blake Ramsdell
   Brute Squad Labs, Inc.

   Email: blaker@gmail.com


   Sean Turner
   sn3rd

   Email: sean@sn3rd.com

































Schaad, et al.               Standards Track                   [Page 63]