💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc7784.txt captured on 2021-12-05 at 23:47:19.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Internet Engineering Task Force (IETF) D. Kumar Request for Comments: 7784 S. Salam Category: Standards Track Cisco ISSN: 2070-1721 T. Senevirathne February 2016 Transparent Interconnection of Lots of Links (TRILL) Operations, Administration, and Maintenance (OAM) MIB Abstract This document specifies the MIB for the OAM (Operations, Administration, and Maintenance) objects for IETF TRILL (Transparent Interconnection of Lots of Links). Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 5741. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc7784. Copyright Notice Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Kumar, et al. Standards Track [Page 1] RFC 7784 TRILL OAM MIB February 2016 Table of Contents 1. Introduction ....................................................2 2. The Internet-Standard Management Framework ......................3 3. Conventions .....................................................3 4. Overview ........................................................4 5. Structure of the MIB Module .....................................4 5.1. Textual Conventions ........................................4 5.2. The TRILL OAM MIB Subtree ..................................4 5.3.1. The Notifications Subtree ...........................5 5.3.2. The Table Structures ................................5 5.3.2.1. trillOamMepTable Objects ...................5 5.3.2.2. trillOamMepFlowCfgTable Objects ............6 5.3.2.3. trillOamPtrTable Objects ...................6 5.3.2.4. trillOamMtvrTable Objects ..................6 5.3.2.5. trillOamMepDbTable Objects .................6 6. Relationship to Other MIB Modules ...............................6 6.1. Relationship to the IEEE8021-TC-MIB ........................7 6.2. Relationship to the IEEE8021-CFM-MIB .......................7 6.3. MIB Modules Required for IMPORTS ...........................8 7. Definitions .....................................................8 8. Security Considerations ........................................44 9. IANA Considerations ............................................47 10. References ....................................................47 10.1. Normative References .....................................47 10.2. Informative References ...................................49 Acknowledgments ...................................................50 Authors' Addresses ................................................50 1. Introduction Overall, TRILL OAM meets the requirements given in [RFC6905]. The general framework for TRILL OAM is specified in [RFC7174]. The details of the Fault Management (FM) solution, conforming to that framework, are presented in [RFC7455]. The solution leverages the message format defined in Ethernet Connectivity Fault Management (CFM) [802.1Q] as the basis for the TRILL OAM message channel. This document uses the CFM MIB modules defined in [802.1Q] as the basis for TRILL OAM MIB and augments the existing tables to add new TRILL managed objects required by TRILL. This document further specifies a new table with associated managed objects for TRILL OAM- specific capabilities. Kumar, et al. Standards Track [Page 2] RFC 7784 TRILL OAM MIB February 2016 2. The Internet-Standard Management Framework For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580]. 3. Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. Abbreviations used in the document include the following: CCM - Continuity Check Message [802.1Q] EMS - Element Management System [Q.840.1] MEP - Maintenance End Point [RFC7174] [802.1Q] MIP - Maintenance Intermediate Point [RFC7174] [802.1Q] MP - Maintenance Point [RFC7174] MTVM - Multi-destination Tree Verification Message [RFC7455] MTVR - Multi-destination Tree Verification Reply [RFC7455] NMS - Network Management System [Q.840.1] PTM - Path Trace Message [RFC7455] PTR - Path Trace Reply [RFC7455] Kumar, et al. Standards Track [Page 3] RFC 7784 TRILL OAM MIB February 2016 4. Overview The TRILL OAM MIB module provides an overall framework for managing TRILL OAM. It leverages the IEEE8021-CFM-MIB and IEEE8021-CFM-V2-MIB modules defined in [802.1Q], and it augments the Maintenance End Point (MEP) and MEP Db entries. It also adds a new table for messages specific to TRILL OAM. 5. Structure of the MIB Module Objects in this MIB module are arranged into subtrees. Each subtree is organized as a set of related objects. The various subtrees are shown below, supplemented with the required elements of the IEEE8021-CFM-MIB module. 5.1. Textual Conventions Textual conventions are defined to represent object types relevant to the TRILL OAM MIB. 5.2. The TRILL OAM MIB Subtree The TRILL OAM MIB tree described below consists of trilloamNotifications (Traps) and trillOamMibObjects. The trilloamNotifications are sent to the management entity whenever a MEP loses/restores contact with its peer flow MEPs. The TRILL OAM MIB per MEP Objects are defined in the trillOamMepTable. The trillOamMepTable augments the dot1agCfmMepEntry (please see Section 6.1) defined in IEEE8021-CFM-MIB. It includes objects that are locally defined for an individual MEP and its associated flow. Kumar, et al. Standards Track [Page 4] RFC 7784 TRILL OAM MIB February 2016 TRILL-OAM-MIB |--trillOamNotifications (trillOamMib 0} |--trillOamFaultAlarm |--trillOamMibObjects {trillOamMib 1} |--trillOamMep {trillOamMibObjects 1} |--trillOamMepTable {trillOamMep 1} - Local TRLL config |--trillOamMepFlowCfgTable |--trillOamPtrTable |--trillOamMtvrTable |--trillOamMepDbTable 5.3.1. The Notifications Subtree Notifications (fault alarms) are sent to the management entity with the OID of the MEP that has detected the fault. Notifications are generated whenever MEP loses/restores contact with its peer flow MEPs. 5.3.2. The Table Structures The TRILL OAM MIB per MEP Objects are defined in the trillOamMepTable. The trillOamMepTable augments the dot1agCfmMepEntry (please see Section 6.1) defined in IEEE8021-CFM-MIB. It includes objects that are locally defined for an individual MEP and its associated flow. 5.3.2.1. trillOamMepTable Objects This table is an extension of the dot1agCfmMepTable. Rows are automatically added or deleted from this table based upon row creation and destruction of the dot1agCfmMepTable. This table represents the local MEP TRILL OAM configuration table. The primary purpose of this table is provide local parameters for the TRILL OAM function found in [RFC7455] and instantiated at a MEP. Kumar, et al. Standards Track [Page 5] RFC 7784 TRILL OAM MIB February 2016 5.3.2.2. trillOamMepFlowCfgTable Objects Each row in this table represents a Flow Configuration Entry for the associated MEP. This table uses four indices. The first three indices are the indices of the Maintenance Domain, MANET, and MEP tables. The fourth index is the specific Flow Configuration Entry on the selected MEP. Some writable objects in this table are only applicable in certain cases (as described under each object below), and attempts to write values for them in other cases will be ignored. 5.3.2.3. trillOamPtrTable Objects Each row in this table represents a Path Trace Reply Entry for the Defined MEP and Transaction. This table uses four indices. The first three indices identify the MEP and the fourth index specifies the Transaction Identifier. This Transaction Identifier uniquely identifies the response for a MEP, which can have multiple flows. 5.3.2.4. trillOamMtvrTable Objects This table includes managed objects for the Multi-destination Reply. Each row in the table represents a Multi-destination Reply Entry for the defined MEP and Transaction. This table uses the following five indices: 1) Maintenance Domain, 2) MANET, 3) MEP tables, 4) Transaction Identifier of selected MEP, and 5) receive order of Multi-destination replies. Some writable objects in this table are only applicable in certain cases (as described under each object below), and attempts to write a value for them in other cases will be ignored. 5.3.2.5. trillOamMepDbTable Objects This table is an augmentation of the dot1agCfmMepDbTable, and rows are automatically added or deleted from this table based upon row creation and destruction of the dot1agCfmMepDbTable. 6. Relationship to Other MIB Modules The IEEE8021-CFM-MIB [IEEE8021-CFM-MIB] and [LLDP-MIB] contain objects that are relevant to the TRILL OAM MIB. Management objects contained in these modules are not duplicated here, to reduce overlap to the extent possible. From the IEEE8021-CFM-MIB, the following objects are imported: o dot1agCfmMdIndex o dot1agCfmMaIndex Kumar, et al. Standards Track [Page 6] RFC 7784 TRILL OAM MIB February 2016 o dot1agCfmMepIdentifier o dot1agCfmMepEntry o dot1agCfmMepDbEntry o Dot1agCfmIngressActionFieldValue o Dot1agCfmEgressActionFieldValue o Dot1agCfmRemoteMepState From the [LLDP-MIB], the following objects are imported: o LldpChassisId o LldpChassisIdSubtype o LldpPortId 6.1. Relationship to the IEEE8021-TC-MIB In TRILL, traffic labeling can be done using either a 12-bit VLAN or a 24-bit Fine-Grained Label (FGL) [RFC7172]. The IEEE8021-TC-MIB definition of IEEE8021ServiceSelectorType includes the following two values: - 1 representing a vlanId, and - 2 representing a 24-bit isid We have chosen to use value 2 for TRILL's FGL. As such, TRILL OAM MIB will import IEEE8021ServiceSelectorType, IEEE8021ServiceSelectorValueOrNone, and IEEE8021ServiceSelectorValue from IEEE8021-TC-MIB. 6.2. Relationship to the IEEE8021-CFM-MIB trillOamMepTable augments dot1agCfmMepEntry. Implementation of IEEE8021-CFM-MIB is required as we are augmenting the IEEE-CFM-MIB Table. Objects/Tables that are not applicable to a TRILL implementation have to be handled by the TRILL implementation backend, and appropriate default values, as described in IEEE8021-CFM-MIB, have to be returned. Kumar, et al. Standards Track [Page 7] RFC 7784 TRILL OAM MIB February 2016 The TRILL OAM implementation doesn't support the Link Trace Message or Link Trace Reply, since, as described in RFC 7455, the Path Trace Message and Reply for unicast traffic and Multi-destination Tree verification Message and Reply for multicast traffic have been substituted for them. Statistics for these messages should default as per IEEE8021-CFM-MIB. 6.3. MIB Modules Required for IMPORTS The following MIB module IMPORTS objects from SNMPv2-SMI [RFC2578], SNMPv2-TC [RFC2579], SNMPv2-CONF [RFC2580], IEEE-8021-CFM-MIB, and LLDP-MIB. 7. Definitions TRILL-OAM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32, Integer32, mib-2, NOTIFICATION-TYPE FROM SNMPv2-SMI RowStatus, TruthValue, TimeStamp, MacAddress FROM SNMPv2-TC OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier, dot1agCfmMepEntry, dot1agCfmMepDbEntry, Dot1agCfmIngressActionFieldValue, Dot1agCfmEgressActionFieldValue, Dot1agCfmRemoteMepState FROM IEEE8021-CFM-MIB LldpChassisId, LldpChassisIdSubtype, LldpPortId, Kumar, et al. Standards Track [Page 8] RFC 7784 TRILL OAM MIB February 2016 LldpPortIdSubtype FROM LLDP-MIB; trillOamMib MODULE-IDENTITY LAST-UPDATED "201601141200Z" ORGANIZATION "IETF TRILL WG" CONTACT-INFO "Email: trill@ietf.org" DESCRIPTION "This MIB module contains the management objects for the management of TRILL Services Operations, Administration and Maintenance. Initial version. Published as RFC 7784. Copyright (c) 2016 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). Kumar, et al. Standards Track [Page 9] RFC 7784 TRILL OAM MIB February 2016 ------------------------------------------------------------- Abbreviations Used Term Definition CFM Connectivity Fault Management IEEE Institute of Electrical and Electronics Engineers IETF Internet Engineering Task Force ITU-T International Telecommunication Union - Telecommunication Standardization Bureau FCOI The Final, Cross-Connect Error, Out-of-band, and In-band flags from the TRILL OAM Application Identifier TLV. LBM Loopback Message MA Maintenance Association (equivalent to a MEG) MAC Media Access Control MD Maintenance Domain (equivalent to an OAM Domain in Metro Ethernet Forum (MEF) 17) MEG Maintenance Entity Group (equivalent to a MA) MEG Level Maintenance Entity Group Level (equivalent to MD Level) MEP Maintenance Association End Point MIB Management Information Base MIP Maintenance Domain Intermediate Point MTVM Multi-destination Tree Verification Message MTVR Multi-destination Tree Verification Reply OAM Operations, Administration, and Maintenance On-Demand OAM actions that are initiated via manual intervention for a limited time to carry out diagnostics. On-demand OAM can result in singular or periodic OAM actions during the diagnostic time interval. PTM Path Trace Message PTR Path Trace Reply RFC Request for Comments SNMP Simple Network Management Protocol TLV Type-Length-Value, a method of encoding Objects TRILL Transparent Interconnection of Lots of Links VLAN Virtual LAN" REVISION "201601141200Z" DESCRIPTION "Initial version. Published as RFC 7784." ::= { mib-2 238 } -- Kumar, et al. Standards Track [Page 10] RFC 7784 TRILL OAM MIB February 2016 -- ***************************************************************** -- Object Definitions in the TRILL OAM MIB Module -- ***************************************************************** trillOamNotifications OBJECT IDENTIFIER ::= { trillOamMib 0 } trillOamMibObjects OBJECT IDENTIFIER ::= { trillOamMib 1 } trillOamMibConformance OBJECT IDENTIFIER ::= { trillOamMib 2 } -- ***************************************************************** -- Groups in the TRILL OAM MIB Module -- ***************************************************************** trillOamMep OBJECT IDENTIFIER ::= { trillOamMibObjects 1 } -- ***************************************************************** -- TRILL OAM MEP Configuration -- ***************************************************************** trillOamMepTable OBJECT-TYPE SYNTAX SEQUENCE OF TrillOamMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is an extension of the dot1agCfmMepTable and rows are automatically added or deleted from this table based upon row creation and destruction of the dot1agCfmMepTable. This table represents the local MEP TRILL OAM configuration table. The primary purpose of this table is provide local parameters for the TRILL OAM function found in RFC 7455 and instantiated at a MEP." REFERENCE "RFC 7455" ::= { trillOamMep 1 } trillOamMepEntry OBJECT-TYPE SYNTAX TrillOamMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of trillOamMepTable." AUGMENTS { dot1agCfmMepEntry } ::= { trillOamMepTable 1 } Kumar, et al. Standards Track [Page 11] RFC 7784 TRILL OAM MIB February 2016 TrillOamMepEntry ::= SEQUENCE { trillOamMepRName Unsigned32, trillOamMepNextPtmTId Counter32, trillOamMepNextMtvmTId Counter32, trillOamMepPtrIn Counter32, trillOamMepPtrInOutofOrder Counter32, trillOamMepPtrOut Counter32, trillOamMepMtvrIn Counter32, trillOamMepMtvrInOutofOrder Counter32, trillOamMepMtvrOut Counter32, trillOamMepTxLbmDestRName Unsigned32, trillOamMepTxLbmHC Unsigned32, trillOamMepTxLbmReplyModeOob TruthValue, trillOamMepTransmitLbmReplyIp OCTET STRING, trillOamMepTxLbmFlowEntropy OCTET STRING, trillOamMepTxPtmDestRName Unsigned32, trillOamMepTxPtmHC Unsigned32, trillOamMepTxPtmReplyModeOob TruthValue, trillOamMepTransmitPtmReplyIp OCTET STRING, trillOamMepTxPtmFlowEntropy OCTET STRING, trillOamMepTxPtmStatus TruthValue, trillOamMepTxPtmResultOK TruthValue, trillOamMepTxPtmSeqNumber Unsigned32, trillOamMepTxPtmMessages Integer32, trillOamMepTxMtvmTree Unsigned32, trillOamMepTxMtvmHC Unsigned32, trillOamMepTxMtvmReplyModeOob TruthValue, trillOamMepTransmitMtvmReplyIp OCTET STRING, trillOamMepTxMtvmFlowEntropy OCTET STRING, trillOamMepTxMtvmStatus TruthValue, trillOamMepTxMtvmResultOK TruthValue, trillOamMepTxMtvmMessages Integer32, trillOamMepTxMtvmSeqNumber Unsigned32, trillOamMepTxMtvmScopeList OCTET STRING, trillOamMepDiscontinuityTime TimeStamp } trillOamMepRName OBJECT-TYPE SYNTAX Unsigned32 (0..65471) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the RBridge Nickname field of the TRILL RBridge as defined in RFC 6325, Section 3.7." REFERENCE "RFC 7455 and RFC 6325, Section 3.7" ::= { trillOamMepEntry 1 } Kumar, et al. Standards Track [Page 12] RFC 7784 TRILL OAM MIB February 2016 trillOamMepNextPtmTId OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Next Sequence Number / Transaction Identifier to be sent in a Multi-destination message. This Sequence Number can be zero because it wraps around. Implementation of this identifier should be should provide a unique code value in order to identify the Transaction Identifier for a MEP with multiple flows." REFERENCE "RFC 7455, Section 10.1.1" ::= { trillOamMepEntry 2 } trillOamMepNextMtvmTId OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Next Sequence Number / Transaction Identifier to be sent in a Multi-destination message. This Sequence Number can be zero because it wraps around. An implementation should be unique to identify Transaction Identifier for a MEP with multiple flows." REFERENCE "RFC 7455, Section 11.2.1" ::= { trillOamMepEntry 3 } trillOamMepPtrIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of valid, in-order Path Trace Replies received." REFERENCE "RFC 7455, Section 10" ::= { trillOamMepEntry 4 } trillOamMepPtrInOutofOrder OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of valid, out-of-order Path Trace Replies received." REFERENCE "RFC 7455, Section 10" ::= { trillOamMepEntry 5 } Kumar, et al. Standards Track [Page 13] RFC 7784 TRILL OAM MIB February 2016 trillOamMepPtrOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of valid, Path Trace Replies transmitted." REFERENCE "RFC 7455, Section 10" ::= { trillOamMepEntry 6 } trillOamMepMtvrIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of valid, in-order Multi-destination Replies received." REFERENCE "RFC 7455, Section 11" ::= { trillOamMepEntry 7 } trillOamMepMtvrInOutofOrder OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of valid, out-of-order Multi-destination Replies received." REFERENCE "RFC 7455, Section 11" ::= { trillOamMepEntry 8 } trillOamMepMtvrOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of valid, Multi-destination Replies transmitted." REFERENCE "RFC 7455, Section 11" ::= { trillOamMepEntry 9 } trillOamMepTxLbmDestRName OBJECT-TYPE SYNTAX Unsigned32 (0..65471) MAX-ACCESS read-create STATUS current DESCRIPTION "The Target Destination RBridge Nickname field, as defined in RFC 6325, Section 3.7, to be transmitted." REFERENCE "RFC 7455 and RFC 6325, Section 3.7" Kumar, et al. Standards Track [Page 14] RFC 7784 TRILL OAM MIB February 2016 ::= { trillOamMepEntry 10 } trillOamMepTxLbmHC OBJECT-TYPE SYNTAX Unsigned32(1..63) MAX-ACCESS read-create STATUS current DESCRIPTION "The Hop Count field to be transmitted." REFERENCE "RFC 7455, Sections 3 and 9" ::= { trillOamMepEntry 11 } trillOamMepTxLbmReplyModeOob OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "True indicates that the Reply to an LBM is out of band and the out-of-band IP Address TLV is to be transmitted. False indicates that in-band reply is transmitted." REFERENCE "RFC 7455, Section 9.2.1" ::= { trillOamMepEntry 12 } trillOamMepTransmitLbmReplyIp OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address for an out-of-band IP Address TLV that is to be transmitted. Maximum length for IPv6 is 16 octets and IPv4 is 4 octets." REFERENCE "RFC 7455, Section 3" ::= { trillOamMepEntry 13 } trillOamMepTxLbmFlowEntropy OBJECT-TYPE SYNTAX OCTET STRING (SIZE (96)) MAX-ACCESS read-create STATUS current DESCRIPTION "96-byte Flow Entropy, as defined in RFC 7455, to be transmitted." REFERENCE "RFC 7455, Section 3" ::= { trillOamMepEntry 14 } trillOamMepTxPtmDestRName OBJECT-TYPE SYNTAX Unsigned32 (0..65471) MAX-ACCESS read-create STATUS current Kumar, et al. Standards Track [Page 15] RFC 7784 TRILL OAM MIB February 2016 DESCRIPTION "The Target Destination RBridge Nickname field, as defined in RFC 6325, Section 3.7, to be transmitted." REFERENCE "RFC 7455 and RFC 6325, Section 3.7" ::= { trillOamMepEntry 15 } trillOamMepTxPtmHC OBJECT-TYPE SYNTAX Unsigned32 (1..63) MAX-ACCESS read-create STATUS current DESCRIPTION "The Hop Count field to be transmitted." REFERENCE "RFC 7455, Section 3" ::= { trillOamMepEntry 16 } trillOamMepTxPtmReplyModeOob OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "True indicates that a Reply to a PTM will be out of band and the out-of-band IP Address TLV is to be transmitted. False indicates that an in-band reply is transmitted." REFERENCE "RFC 7455, Section 10" DEFVAL { false } ::= { trillOamMepEntry 17 } trillOamMepTransmitPtmReplyIp OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address for an out-of-band IP Address TLV to be transmitted. The maximum length for an IPv6 address is 16 octets. The maximum length for an IPv4 address is 4 octets." REFERENCE "RFC 7455, Sections 3 and 10" ::= { trillOamMepEntry 18 } trillOamMepTxPtmFlowEntropy OBJECT-TYPE SYNTAX OCTET STRING (SIZE (96)) MAX-ACCESS read-create STATUS current DESCRIPTION "96-byte Flow Entropy, as defined in RFC 7455, to be transmitted." REFERENCE "RFC 7455, Section 3" Kumar, et al. Standards Track [Page 16] RFC 7784 TRILL OAM MIB February 2016 ::= { trillOamMepEntry 19 } trillOamMepTxPtmStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A Boolean flag set to TRUE by the MEP Path Trace Initiator State Machine or a MIB manager to indicate that another PTM is being transmitted. This is reset to FALSE by the MEP Initiator State Machine. The PTM managed objects in the MEP table are used in a manner similar to that described for LBM transmission in the dot1agCfmMepTable. As per RFC 7455, Section 10, operation of the Path Trace Message is identical to the Loopback message except that it is first transmitted with a TRILL Header Hop Count field value of 1 and then retransmitted with an incrementing Hop Count until a response is received from the destination RBridge, or the Hop Count reaches a configured maximum value. The trillOamMepTxPtmStatus status is reset to FALSE by the initiator when the last PTM is transmitted." REFERENCE "RFC 7455, Section 10" DEFVAL { false } ::= { trillOamMepEntry 20 } trillOamMepTxPtmResultOK OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the following results of the operation: - true indicates the Path Trace Message(s) will be (or has been) sent. - false indicates the Path Trace Message(s) will not be sent." REFERENCE "RFC 7455, Section 10" DEFVAL { true } ::= { trillOamMepEntry 21 } trillOamMepTxPtmSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Path Trace Transaction Identifier of the first PTM (to be) sent. The value returned is undefined if trillOamMepTxPtmResultOK is false." REFERENCE "RFC 7455, Section 10" Kumar, et al. Standards Track [Page 17] RFC 7784 TRILL OAM MIB February 2016 ::= { trillOamMepEntry 22 } trillOamMepTxPtmMessages OBJECT-TYPE SYNTAX Integer32 (1..1024) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of Path Trace messages to be transmitted. As per RFC 7455, Section 10, the first Path Trace Message is transmitted with a Hop Count of 1; an RBridge may continue to retransmit the request at periodic intervals with an incrementing Hop Count until a response is received from the destination RBridge or the Hop Count reaches a configured maximum value. The event of the Destination response being received or the Hop Count reaching its maximum is treated as a single Counter increment of this object." REFERENCE "RFC 7455, Section 10" ::= { trillOamMepEntry 23 } trillOamMepTxMtvmTree OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Multi-destination Tree identifier, as defined in RFC 6325, for an MTVM." ::= { trillOamMepEntry 24 } trillOamMepTxMtvmHC OBJECT-TYPE SYNTAX Unsigned32(1..63) MAX-ACCESS read-create STATUS current DESCRIPTION "The Hop Count field to be transmitted. " REFERENCE "RFC 7455, Section 3, and RFC 6325, Section 3" ::= { trillOamMepEntry 25 } trillOamMepTxMtvmReplyModeOob OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "True indicates that the reply to an MTVM is out of band and this out-of-band IP Address TLV is where the reply is to be transmitted. Kumar, et al. Standards Track [Page 18] RFC 7784 TRILL OAM MIB February 2016 False indicates that an in-band reply is transmitted." REFERENCE "RFC 7455, Section 11" ::= { trillOamMepEntry 26 } trillOamMepTransmitMtvmReplyIp OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "IP address for an out-of-band IP Address TLV that is to be transmitted. The maximum length for IPv6 is 16 octets and IPv4 is 4 octets." REFERENCE "RFC 7455, Section 11" ::= { trillOamMepEntry 27 } trillOamMepTxMtvmFlowEntropy OBJECT-TYPE SYNTAX OCTET STRING (SIZE (96)) MAX-ACCESS read-create STATUS current DESCRIPTION "96-byte Flow Entropy, as defined in RFC 7455, to be transmitted." REFERENCE "RFC 7455, Section 3" ::= { trillOamMepEntry 28 } trillOamMepTxMtvmStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A Boolean flag set to TRUE by the MEP Multi-destination Initiator State Machine or a MIB manager to indicate that another MTVM is being transmitted. Reset to FALSE by the MEP Initiator State Machine. The MTVM-managed objects in the MEP table are used in a manner similar to that described for LBM transmission in the dot1agCfmMepTable. As per RFC 7455, Section 11, operation of the MTVM is identical to the Loopback message except that it is first transmitted with a TRILL Header Hop Count field value of 1 and it is retransmitted incrementing the Hop Count until a response is received from the destination RBridge or the Hop Count reaches a configured maximum value. The trillOamMepTxMtvmStatus Status is reset to FALSE by the initiator when the last MTVM is transmitted." REFERENCE "RFC 7455, Section 11" DEFVAL { false } Kumar, et al. Standards Track [Page 19] RFC 7784 TRILL OAM MIB February 2016 ::= { trillOamMepEntry 29 } trillOamMepTxMtvmResultOK OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the result of the operation in the following way: - true indicates the Multi-destination Message(s) will be (or has been) sent. - false indicates the Multi-destination Message(s) will not be sent." REFERENCE "RFC 7455, Section 11" DEFVAL { true } ::= { trillOamMepEntry 30 } trillOamMepTxMtvmMessages OBJECT-TYPE SYNTAX Integer32 (1..1024) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of Multi-destination messages to be transmitted. The RBridge transmit the Multi-destination message incrementing the session Identification Number at periodic interval until this count expires." REFERENCE "RFC 7455, Section 11" ::= { trillOamMepEntry 31 } trillOamMepTxMtvmSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Multi-destination Transaction Identifier of the first MTVM (to be) sent. The value returned is undefined if trillOamMepTxMtvmResultOK is false." REFERENCE "RFC 7455, Section 11" ::= { trillOamMepEntry 32 } trillOamMepTxMtvmScopeList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The Multi-destination RBridge Scope list, which requires 2 octets per RBridge." Kumar, et al. Standards Track [Page 20] RFC 7784 TRILL OAM MIB February 2016 REFERENCE "RFC 7455, Section 11" ::= { trillOamMepEntry 33 } trillOamMepDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Snapshot of the value of the sysUpTime object at the beginning of the latest period of continuity of the statistical counters associated with this MEP." ::= { trillOamMepEntry 34 } -- ***************************************************************** -- TRILL OAM Tx Measurement Configuration Table -- ***************************************************************** trillOamMepFlowCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF TrillOamMepFlowCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes configuration objects and operations for the TRILL OAM facilities in RFC 7455. Each row in the table represents a Flow Configuration Entry for the defined MEP. This table uses four indices. The first three indices are the indices of the Maintenance Domain, MANET, and MEP tables. The fourth index is the specific Flow Configuration Entry on the selected MEP. Some writable objects in this table are only applicable in certain cases (as described under each object), and attempts to write values for them in other cases will be ignored." REFERENCE "RFC 7455" ::= { trillOamMep 2 } trillOamMepFlowCfgEntry OBJECT-TYPE SYNTAX TrillOamMepFlowCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of trillOamMepFlowCfgTable." INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier, Kumar, et al. Standards Track [Page 21] RFC 7784 TRILL OAM MIB February 2016 trillOamMepFlowCfgIndex } ::= { trillOamMepFlowCfgTable 1 } TrillOamMepFlowCfgEntry ::= SEQUENCE { trillOamMepFlowCfgIndex Unsigned32, trillOamMepFlowCfgFlowEntropy OCTET STRING, trillOamMepFlowCfgDestRName Unsigned32, trillOamMepFlowCfgFlowHC Unsigned32, trillOamMepFlowCfgRowStatus RowStatus } trillOamMepFlowCfgIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index to the TRILL OAM MEP Flow Configuration table, which indicates the specific flow for the MEP. The index is never reused for other flow sessions on the same MEP while this session is active. The index value keeps increasing until it wraps to 0. This value can also be used in the flow-identifier TLV RFC 7455." REFERENCE "RFC 7455" ::= { trillOamMepFlowCfgEntry 1 } trillOamMepFlowCfgFlowEntropy OBJECT-TYPE SYNTAX OCTET STRING (SIZE (96)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is 96 bytes of Flow Entropy as described in TRILL OAM, RFC 7455." REFERENCE "RFC 7455, Section 3" ::= { trillOamMepFlowCfgEntry 2 } trillOamMepFlowCfgDestRName OBJECT-TYPE SYNTAX Unsigned32 (0..65471) MAX-ACCESS read-create STATUS current DESCRIPTION "The Target Destination RBridge Nickname field, as defined in RFC 6325, Section 3.7, to be transmitted." REFERENCE "RFC 7455, Section 3, and RFC 6325, Section 3.7" ::= { trillOamMepFlowCfgEntry 3 } Kumar, et al. Standards Track [Page 22] RFC 7784 TRILL OAM MIB February 2016 trillOamMepFlowCfgFlowHC OBJECT-TYPE SYNTAX Unsigned32 (1..63) MAX-ACCESS read-create STATUS current DESCRIPTION "The Hop Count field to be transmitted." REFERENCE "RFC 7455, Section 3, and RFC 6325, Section 3.6" ::= { trillOamMepFlowCfgEntry 4 } trillOamMepFlowCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row cannot be changed if the row is active. All columns MUST have a valid value before a row can be activated." ::= { trillOamMepFlowCfgEntry 5 } -- ****************************************************************** -- TRILL OAM Path Trace Reply Table -- ****************************************************************** trillOamPtrTable OBJECT-TYPE SYNTAX SEQUENCE OF TrillOamPtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes Path Trace Reply objects and operations for the TRILL OAM facilities as described in RFC 7455. Each row in the table represents a Path Trace Reply Entry for the defined MEP and Transaction. This table uses four indices. The first three indices are the indices of the Maintenance Domain, MANET, and MEP tables. The fourth index is the specific Transaction Identifier on the selected MEP. Some writable objects in this table are only applicable in certain cases (as described under each object), and attempts to write values for them in other cases will be ignored." REFERENCE "RFC 7455" ::= { trillOamMep 3 } Kumar, et al. Standards Track [Page 23] RFC 7784 TRILL OAM MIB February 2016 trillOamPtrEntry OBJECT-TYPE SYNTAX TrillOamPtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of trillOamPtrTable." INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier, trillOamMepPtrTransactionId } ::= { trillOamPtrTable 1 } TrillOamPtrEntry ::= SEQUENCE { trillOamMepPtrTransactionId Unsigned32, trillOamMepPtrHC Unsigned32, trillOamMepPtrFlag Unsigned32, trillOamMepPtrErrorCode Unsigned32, trillOamMepPtrTerminalMep TruthValue, trillOamMepPtrLastEgressId Unsigned32, trillOamMepPtrIngress Dot1agCfmIngressActionFieldValue, trillOamMepPtrIngressMac MacAddress, trillOamMepPtrIngressPortIdSubtype LldpPortIdSubtype, trillOamMepPtrIngressPortId LldpPortId, trillOamMepPtrEgress Dot1agCfmEgressActionFieldValue, trillOamMepPtrEgressMac MacAddress, trillOamMepPtrEgressPortIdSubtype LldpPortIdSubtype, trillOamMepPtrEgressPortId LldpPortId, trillOamMepPtrChassisIdSubtype LldpChassisIdSubtype, trillOamMepPtrChassisId LldpChassisId, trillOamMepPtrOrganizationSpecificTlv OCTET STRING, trillOamMepPtrNextHopNicknames OCTET STRING } trillOamMepPtrTransactionId OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sequence Number / Transaction Identifier returned by a previous transmit path trace message command, indicating which PTM's response is going to be returned." REFERENCE "RFC 7455, Section 10" ::= { trillOamPtrEntry 1 } Kumar, et al. Standards Track [Page 24] RFC 7784 TRILL OAM MIB February 2016 trillOamMepPtrHC OBJECT-TYPE SYNTAX Unsigned32 (1..63) MAX-ACCESS read-only STATUS current DESCRIPTION "Hop Count field value for a returned PTR." REFERENCE "RFC 7455" ::= { trillOamPtrEntry 2 } trillOamMepPtrFlag OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "FCOI (TRILL OAM Message TLV) field value for a returned PTR." REFERENCE "RFC 7455, Section 8.4.3" ::= { trillOamPtrEntry 3 } trillOamMepPtrErrorCode OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Return Code and Return Sub-code value for a returned PTR." REFERENCE "RFC 7455, Section 8.4.3" ::= { trillOamPtrEntry 4 } trillOamMepPtrTerminalMep OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A boolean value stating whether the forwarded PTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field." REFERENCE "RFC 7455" ::= { trillOamPtrEntry 5 } trillOamMepPtrLastEgressId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An Integer field holding the Last Egress Identifier returned in the PTR Upstream RBridge Nickname TLV of the PTR. The Last Egress Identifier identifies the Upstream Nickname." REFERENCE "RFC 7455, Section 8.4.1" Kumar, et al. Standards Track [Page 25] RFC 7784 TRILL OAM MIB February 2016 ::= { trillOamPtrEntry 6 } trillOamMepPtrIngress OBJECT-TYPE SYNTAX Dot1agCfmIngressActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value returned in the Ingress Action field of the PTR. The value ingNoTlv(0) indicates that no Reply Ingress TLV was returned in the PTM." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamPtrEntry 7 } trillOamMepPtrIngressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address returned in the ingress MAC address field." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamPtrEntry 8 } trillOamMepPtrIngressPortIdSubtype OBJECT-TYPE SYNTAX LldpPortIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress Port ID. The format of this object is determined by the value of the trillOamMepPtrIngressPortIdSubtype object." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamPtrEntry 9 } trillOamMepPtrIngressPortId OBJECT-TYPE SYNTAX LldpPortId MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress Port ID. The format of this object is determined by the value of the trillOamMepPtrIngressPortId object." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamPtrEntry 10 } trillOamMepPtrEgress OBJECT-TYPE SYNTAX Dot1agCfmEgressActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value returned in the Egress Action field of the PTR. Kumar, et al. Standards Track [Page 26] RFC 7784 TRILL OAM MIB February 2016 The value ingNoTlv(0) indicates that no Reply Egress TLV was returned in the PTM." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamPtrEntry 11 } trillOamMepPtrEgressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address returned in the egress MAC address field." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamPtrEntry 12 } trillOamMepPtrEgressPortIdSubtype OBJECT-TYPE SYNTAX LldpPortIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "Egress Port ID. The format of this object is determined by the value of the trillOamMepPtrEgressPortIdSubtype object." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamPtrEntry 13 } trillOamMepPtrEgressPortId OBJECT-TYPE SYNTAX LldpPortId MAX-ACCESS read-only STATUS current DESCRIPTION "Egress Port ID. The format of this object is determined by the value of the trillOamMepPtrEgressPortId object." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamPtrEntry 14 } trillOamMepPtrChassisIdSubtype OBJECT-TYPE SYNTAX LldpChassisIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the format of the Chassis ID returned in the Sender ID TLV of the PTR, if any. This value is meaningless if the trillOamMepPtrChassisId has a length of 0." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamPtrEntry 15 } Kumar, et al. Standards Track [Page 27] RFC 7784 TRILL OAM MIB February 2016 trillOamMepPtrChassisId OBJECT-TYPE SYNTAX LldpChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "The Chassis ID returned in the Sender ID TLV of the PTR, if any. The format of this object is determined by the value of the trillOamMepPtrChassisIdSubtype object." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamPtrEntry 16 } trillOamMepPtrOrganizationSpecificTlv OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0 | 4..1500)) MAX-ACCESS read-only STATUS current DESCRIPTION "All organization-specific TLVs returned in the PTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamPtrEntry 17 } trillOamMepPtrNextHopNicknames OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0 | 4..1500)) MAX-ACCESS read-only STATUS current DESCRIPTION "Next hop RBridge List TLV returned in the PTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamPtrEntry 18 } -- ****************************************************************** -- TRILL OAM Multi-destination Reply Table -- ****************************************************************** trillOamMtvrTable OBJECT-TYPE SYNTAX SEQUENCE OF TrillOamMtvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes Multi-destination Reply objects and operations for the TRILL OAM facilities described in RFC 7455. Each row in the table represents a Multi-destination Reply Entry for the defined MEP and Transaction. This table uses Kumar, et al. Standards Track [Page 28] RFC 7784 TRILL OAM MIB February 2016 five indices. The first three indices are the indices of the Maintenance Domain, MANET, and MEP tables. The fourth index is the specific Transaction Identifier on the selected MEP. The fifth index is the receive order of Multi-destination replies. Some writable objects in this table are only applicable in certain cases (as described under each object), and attempts to write values for them in other cases will be ignored." REFERENCE "RFC 7455" ::= { trillOamMep 4 } trillOamMtvrEntry OBJECT-TYPE SYNTAX TrillOamMtvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of trillOamMtvrTable." INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier, trillOamMepPtrTransactionId, trillOamMepMtvrReceiveOrder } ::= { trillOamMtvrTable 1 } TrillOamMtvrEntry ::= SEQUENCE { trillOamMepMtvrTransactionId Unsigned32, trillOamMepMtvrReceiveOrder Unsigned32, trillOamMepMtvrFlag Unsigned32, trillOamMepMtvrErrorCode Unsigned32, trillOamMepMtvrLastEgressId Unsigned32, trillOamMepMtvrIngress Dot1agCfmIngressActionFieldValue, trillOamMepMtvrIngressMac MacAddress, trillOamMepMtvrIngressPortIdSubtype LldpPortIdSubtype, trillOamMepMtvrIngressPortId LldpPortId, trillOamMepMtvrEgress Dot1agCfmEgressActionFieldValue, trillOamMepMtvrEgressMac MacAddress, trillOamMepMtvrEgressPortIdSubtype LldpPortIdSubtype, trillOamMepMtvrEgressPortId LldpPortId, trillOamMepMtvrChassisIdSubtype LldpChassisIdSubtype, trillOamMepMtvrChassisId LldpChassisId, trillOamMepMtvrOrganizationSpecificTlv OCTET STRING, trillOamMepMtvrNextHopNicknames OCTET STRING, trillOamMepMtvrReceiverAvailability TruthValue, trillOamMepMtvrReceiverCount TruthValue } Kumar, et al. Standards Track [Page 29] RFC 7784 TRILL OAM MIB February 2016 trillOamMepMtvrTransactionId OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sequence Number / Transaction Identifier returned by a previously transmitted Multi-destination message command indicating which MTVM's response is going to be returned." REFERENCE "RFC 7455, Section 11" ::= { trillOamMtvrEntry 1 } trillOamMepMtvrReceiveOrder OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index to distinguish among multiple MTVRs with same MTVR Transaction Identifier field value. trillOamMepMtvrReceiveOrder is assigned sequentially from 1, in the order that the Multi-destination Tree Initiator received the MTVRs." REFERENCE "RFC 7455, Section 11" ::= { trillOamMtvrEntry 2 } trillOamMepMtvrFlag OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "FCOI (TRILL OAM Message TLV) field value for a returned MTVR." REFERENCE "RFC 7455, Section 8.4.2" ::= { trillOamMtvrEntry 3 } trillOamMepMtvrErrorCode OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Return Code and Return Sub-code value for a returned MTVR." REFERENCE "RFC 7455, Section 8.4.2" ::= { trillOamMtvrEntry 4 } trillOamMepMtvrLastEgressId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current Kumar, et al. Standards Track [Page 30] RFC 7784 TRILL OAM MIB February 2016 DESCRIPTION "An Integer field holding the Last Egress Identifier returned in the MTVR Upstream RBridge Nickname TLV of the MTVR. The Last Egress Identifier identifies the Upstream Nickname." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamMtvrEntry 5 } trillOamMepMtvrIngress OBJECT-TYPE SYNTAX Dot1agCfmIngressActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value returned in the Ingress Action field of the MTVR. The value ingNoTlv(0) indicates that no Reply Ingress TLV was returned in the MTVM." REFERENCE "RFC 7455, Section 11.2.3" ::= { trillOamMtvrEntry 6 } trillOamMepMtvrIngressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address returned in the ingress MAC address field." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamMtvrEntry 7 } trillOamMepMtvrIngressPortIdSubtype OBJECT-TYPE SYNTAX LldpPortIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress Port ID. The format of this object is determined by the value of the trillOamMepMtvrIngressPortIdSubtype object." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamMtvrEntry 8 } trillOamMepMtvrIngressPortId OBJECT-TYPE SYNTAX LldpPortId MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress Port ID. The format of this object is determined by the value of the trillOamMepMtvrIngressPortId object." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamMtvrEntry 9 } Kumar, et al. Standards Track [Page 31] RFC 7784 TRILL OAM MIB February 2016 trillOamMepMtvrEgress OBJECT-TYPE SYNTAX Dot1agCfmEgressActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value returned in the Egress Action field of the MTVR. The value ingNoTlv(0) indicates that no Reply Egress TLV was returned in the MTVR." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamMtvrEntry 10 } trillOamMepMtvrEgressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address returned in the egress MAC address field." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamMtvrEntry 11 } trillOamMepMtvrEgressPortIdSubtype OBJECT-TYPE SYNTAX LldpPortIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "Egress Port ID. The format of this object is determined by the value of the trillOamMepMtvrEgressPortIdSubtype object." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamMtvrEntry 12 } trillOamMepMtvrEgressPortId OBJECT-TYPE SYNTAX LldpPortId MAX-ACCESS read-only STATUS current DESCRIPTION "Egress Port ID. The format of this object is determined by the value of the trillOamMepMtvrEgressPortId object." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamMtvrEntry 13 } trillOamMepMtvrChassisIdSubtype OBJECT-TYPE SYNTAX LldpChassisIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the format of the Chassis ID returned in the Sender ID TLV of the MTVR, if any. This value is meaningless if the trillOamMepMtvrChassisId has a Kumar, et al. Standards Track [Page 32] RFC 7784 TRILL OAM MIB February 2016 length of 0." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamMtvrEntry 14 } trillOamMepMtvrChassisId OBJECT-TYPE SYNTAX LldpChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "The Chassis ID returned in the Sender ID TLV of the MTVR, if any. The format of this object is determined by the value of the trillOamMepMtvrChassisIdSubtype object." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamMtvrEntry 15 } trillOamMepMtvrOrganizationSpecificTlv OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0 | 4..1500)) MAX-ACCESS read-only STATUS current DESCRIPTION "All organization-specific TLVs returned in the MTVR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together." REFERENCE "RFC 7455, Section 8.4.1" ::= { trillOamMtvrEntry 16 } trillOamMepMtvrNextHopNicknames OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0 | 4..1500)) MAX-ACCESS read-only STATUS current DESCRIPTION "Next hop RBridge List TLV returned in the PTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together." REFERENCE "RFC 7455, Section 8.4.3" ::= { trillOamMtvrEntry 17 } trillOamMepMtvrReceiverAvailability OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A value of true indicates that the MTVR response contained Multicast receiver availability TLV." REFERENCE "RFC 7455, Section 8.4.10" ::= { trillOamMtvrEntry 18 } Kumar, et al. Standards Track [Page 33] RFC 7784 TRILL OAM MIB February 2016 trillOamMepMtvrReceiverCount OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of multicast receivers available on the responding RBridge on the VLAN specified by the diagnostic VLAN." REFERENCE "RFC 7455, Section 8.4.10" ::= { trillOamMtvrEntry 19 } -- ***************************************************************** -- TRILL OAM MEP Database Table -- ***************************************************************** trillOamMepDbTable OBJECT-TYPE SYNTAX SEQUENCE OF TrillOamMepDbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is an extension of the dot1agCfmMepDbTable and rows are automatically added to or deleted from this table based upon row creation and destruction of the dot1agCfmMepDbTable." REFERENCE "RFC 7455" ::= { trillOamMep 5 } trillOamMepDbEntry OBJECT-TYPE SYNTAX TrillOamMepDbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of trillOamMepDbTable." AUGMENTS { dot1agCfmMepDbEntry } ::= { trillOamMepDbTable 1 } TrillOamMepDbEntry ::= SEQUENCE { trillOamMepDbFlowIndex Unsigned32, trillOamMepDbFlowEntropy OCTET STRING, trillOamMepDbFlowState Dot1agCfmRemoteMepState, trillOamMepDbFlowFailedOkTime TimeStamp, trillOamMepDbRBridgeName Unsigned32, trillOamMepDbLastGoodSeqNum Counter32 } Kumar, et al. Standards Track [Page 34] RFC 7784 TRILL OAM MIB February 2016 trillOamMepDbFlowIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the flow. If the Flow Identifier TLV is received, then the index received can also be used." REFERENCE "RFC 7455" ::= {trillOamMepDbEntry 1 } trillOamMepDbFlowEntropy OBJECT-TYPE SYNTAX OCTET STRING (SIZE (96)) MAX-ACCESS read-only STATUS current DESCRIPTION "96 byte Flow Entropy." REFERENCE "RFC 7455, Section 3" ::= {trillOamMepDbEntry 2 } trillOamMepDbFlowState OBJECT-TYPE SYNTAX Dot1agCfmRemoteMepState MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of the remote MEP (flow-based) IFF State machines. State Machine is running now per flow." REFERENCE "RFC 7455" ::= {trillOamMepDbEntry 3 } trillOamMepDbFlowFailedOkTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The Time (sysUpTime) at which the Remote MEP flow state machine last entered either the RMEP_FAILED or RMEP_OK state." REFERENCE "RFC 7455" ::= {trillOamMepDbEntry 4 } trillOamMepDbRBridgeName OBJECT-TYPE SYNTAX Unsigned32(0..65471) MAX-ACCESS read-only STATUS current DESCRIPTION "Remote MEP RBridge Nickname." REFERENCE "RFC 7455 and RFC 6325, Section 3" Kumar, et al. Standards Track [Page 35] RFC 7784 TRILL OAM MIB February 2016 ::= {trillOamMepDbEntry 5 } trillOamMepDbLastGoodSeqNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last Sequence Number received." REFERENCE "RFC 7455, Section 13.1" ::= {trillOamMepDbEntry 6} -- ****************************************************************** -- TRILL OAM MIB NOTIFICATIONS (TRAPS) -- This notification is sent to management entity whenever a -- MEP loses/restores -- contact with its peer flow MEPs -- ****************************************************************** trillOamFaultAlarm NOTIFICATION-TYPE OBJECTS { trillOamMepDbFlowState } STATUS current DESCRIPTION "A MEP flow has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the flow that has detected the fault. The management entity receiving the notification can identify the system from the network source address of the notification and can identify the flow reporting the defect by the indices in the OID of the trillOamMepFlowIndex and trillOamFlowDefect variable in the notification: dot1agCfmMdIndex - Also the index of the MEP's Maintenance Domain table entry (dot1agCfmMdTable). dot1agCfmMaIndex - Also an index (with the MD table index) of the MEP's Maintenance Association network table entry (dot1agCfmMaNetTable) and (with the MD table index and component ID) of the MEP's MA component table entry (dot1agCfmMaCompTable). dot1agCfmMepIdentifier - MEP Identifier and final index into the MEP table (dot1agCfmMepTable). trillOamMepFlowCfgIndex - Index identifies indicates the specific flow for the MEP" REFERENCE "RFC 7455" ::= { trillOamNotifications 1 } Kumar, et al. Standards Track [Page 36] RFC 7784 TRILL OAM MIB February 2016 -- ****************************************************************** -- TRILL OAM MIB Module - Conformance Information -- ****************************************************************** trillOamMibCompliances OBJECT IDENTIFIER ::= { trillOamMibConformance 1 } trillOamMibGroups OBJECT IDENTIFIER ::= { trillOamMibConformance 2 } -- ****************************************************************** -- TRILL OAM MIB Units of Conformance -- ****************************************************************** trillOamMepMandatoryGroup OBJECT-GROUP OBJECTS { trillOamMepRName, trillOamMepNextPtmTId, trillOamMepNextMtvmTId, trillOamMepPtrIn, trillOamMepPtrInOutofOrder, trillOamMepPtrOut, trillOamMepMtvrIn, trillOamMepMtvrInOutofOrder, trillOamMepMtvrOut, trillOamMepTxLbmDestRName, trillOamMepTxLbmHC, trillOamMepTxLbmReplyModeOob, trillOamMepTransmitLbmReplyIp, trillOamMepTxLbmFlowEntropy, trillOamMepTxPtmDestRName, trillOamMepTxPtmHC, trillOamMepTxPtmReplyModeOob, trillOamMepTransmitPtmReplyIp, trillOamMepTxPtmFlowEntropy, trillOamMepTxPtmStatus, trillOamMepTxPtmResultOK, trillOamMepTxPtmMessages, trillOamMepTxPtmSeqNumber, trillOamMepTxMtvmTree, trillOamMepTxMtvmHC, trillOamMepTxMtvmReplyModeOob, trillOamMepTransmitMtvmReplyIp, trillOamMepTxMtvmFlowEntropy, trillOamMepTxMtvmStatus, trillOamMepTxMtvmResultOK, trillOamMepTxMtvmMessages, trillOamMepTxMtvmSeqNumber, Kumar, et al. Standards Track [Page 37] RFC 7784 TRILL OAM MIB February 2016 trillOamMepTxMtvmScopeList, trillOamMepDiscontinuityTime } STATUS current DESCRIPTION "Mandatory objects for the TRILL OAM MEP group." ::= { trillOamMibGroups 1 } trillOamMepFlowCfgTableGroup OBJECT-GROUP OBJECTS { trillOamMepFlowCfgFlowEntropy, trillOamMepFlowCfgDestRName, trillOamMepFlowCfgFlowHC, trillOamMepFlowCfgRowStatus } STATUS current DESCRIPTION "TRILL OAM MEP Flow Configuration objects group." ::= { trillOamMibGroups 2 } trillOamPtrTableGroup OBJECT-GROUP OBJECTS { trillOamMepPtrHC, trillOamMepPtrFlag, trillOamMepPtrErrorCode, trillOamMepPtrTerminalMep, trillOamMepPtrLastEgressId, trillOamMepPtrIngress, trillOamMepPtrIngressMac, trillOamMepPtrIngressPortIdSubtype, trillOamMepPtrIngressPortId, trillOamMepPtrEgress, trillOamMepPtrEgressMac, trillOamMepPtrEgressPortIdSubtype, trillOamMepPtrEgressPortId, trillOamMepPtrChassisIdSubtype, trillOamMepPtrChassisId, trillOamMepPtrOrganizationSpecificTlv, trillOamMepPtrNextHopNicknames } STATUS current DESCRIPTION "TRILL OAM MEP PTR objects group." ::= { trillOamMibGroups 3 } Kumar, et al. Standards Track [Page 38] RFC 7784 TRILL OAM MIB February 2016 trillOamMtvrTableGroup OBJECT-GROUP OBJECTS { trillOamMepMtvrFlag, trillOamMepMtvrErrorCode, trillOamMepMtvrLastEgressId, trillOamMepMtvrIngress, trillOamMepMtvrIngressMac, trillOamMepMtvrIngressPortIdSubtype, trillOamMepMtvrIngressPortId, trillOamMepMtvrEgress, trillOamMepMtvrEgressMac, trillOamMepMtvrEgressPortIdSubtype, trillOamMepMtvrEgressPortId, trillOamMepMtvrChassisIdSubtype, trillOamMepMtvrChassisId, trillOamMepMtvrOrganizationSpecificTlv, trillOamMepMtvrNextHopNicknames, trillOamMepMtvrReceiverAvailability, trillOamMepMtvrReceiverCount } STATUS current DESCRIPTION "TRILL OAM MEP MTVR objects group." ::= { trillOamMibGroups 4 } trillOamMepDbGroup OBJECT-GROUP OBJECTS { trillOamMepDbFlowIndex, trillOamMepDbFlowEntropy, trillOamMepDbFlowState, trillOamMepDbFlowFailedOkTime, trillOamMepDbRBridgeName, trillOamMepDbLastGoodSeqNum } STATUS current DESCRIPTION "TRILL OAM MEP DB objects group." ::= { trillOamMibGroups 5 } trillOamNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { trillOamFaultAlarm } STATUS current DESCRIPTION "A collection of objects describing notifications(traps)." ::= { trillOamMibGroups 6 } Kumar, et al. Standards Track [Page 39] RFC 7784 TRILL OAM MIB February 2016 -- ****************************************************************** -- TRILL OAM MIB Module Compliance Statements -- ****************************************************************** trillOamMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the TRILL OAM MIB." MODULE -- this module MANDATORY-GROUPS { trillOamMepMandatoryGroup, trillOamMepFlowCfgTableGroup, trillOamPtrTableGroup, trillOamMtvrTableGroup, trillOamMepDbGroup, trillOamNotificationGroup } ::= { trillOamMibCompliances 1 } -- Compliance requirement for read-only implementation. trillOamMibReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance requirement for implementations that only provide read-only support for TRILL-OAM-MIB. Such devices can be monitored but cannot be configured using this MIB module." MODULE -- this module MANDATORY-GROUPS { trillOamMepMandatoryGroup, trillOamMepFlowCfgTableGroup, trillOamPtrTableGroup, trillOamMtvrTableGroup, trillOamMepDbGroup, trillOamNotificationGroup } -- trillOamMepTable OBJECT trillOamMepTxLbmDestRName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxLbmHC MIN-ACCESS read-only DESCRIPTION "Write access is not required." Kumar, et al. Standards Track [Page 40] RFC 7784 TRILL OAM MIB February 2016 OBJECT trillOamMepTxLbmReplyModeOob MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTransmitLbmReplyIp MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxLbmFlowEntropy MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxPtmDestRName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxPtmHC MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxPtmReplyModeOob MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTransmitPtmReplyIp MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxPtmFlowEntropy MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxPtmStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." Kumar, et al. Standards Track [Page 41] RFC 7784 TRILL OAM MIB February 2016 OBJECT trillOamMepTxPtmResultOK MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxPtmMessages MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxPtmSeqNumber MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxMtvmTree MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxMtvmHC MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxMtvmReplyModeOob MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTransmitMtvmReplyIp MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxMtvmFlowEntropy MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxMtvmStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." Kumar, et al. Standards Track [Page 42] RFC 7784 TRILL OAM MIB February 2016 OBJECT trillOamMepTxMtvmResultOK MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxMtvmMessages MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxMtvmSeqNumber MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepTxMtvmScopeList MIN-ACCESS read-only DESCRIPTION "Write access is not required." -- trillOamMepFlowCfgTable OBJECT trillOamMepFlowCfgFlowEntropy MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepFlowCfgDestRName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepFlowCfgFlowHC MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT trillOamMepFlowCfgRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { trillOamMibCompliances 2 } END Kumar, et al. Standards Track [Page 43] RFC 7784 TRILL OAM MIB February 2016 8. Security Considerations This MIB relates to a system that will provide network connectivity and packet-forwarding services. As such, improper manipulation of the objects represented by this MIB may result in denial of service to a large number of end users. There are a number of management objects defined in this MIB module with a MAX-ACCESS clause of read-create. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection opens devices to attack. There are the tables and objects and their sensitivity/vulnerability: The following table and objects in the TRILL OAM MIB can be manipulated to interfere with the operation of RBridges by causing CPU use spikes: o trillOamMepTransmitLbmReplyIp allows the reply from a Loopback message to be transmitted to an IP address in the TLV, thus allowing replies to be sent to any system to cause denial of service. o trillOamMepTransmitPtmReplyIp allows the reply from a Path Trace message to be transmitted to an IP address in the TLV, thus allowing replies to be sent to any system to cause denial of service. o trillOamMepTxPtmMessages allows the generation of PTMs and can be used to generate lots of CPU-driven traffic. o trillOamMepTransmitMtvmReplyIp allows a from reply from an MTVM to be transmitted to an IP address in the TLV, thus allowing replies to be sent to any system to cause denial of service. o trillOamMepTxMtvmMessages allows the generation of MTVMs and can be used to generate lots of CPU-driven traffic. The following objects in the TRILL OAM MIB are read-create and can be manipulated to interfere with the OAM operations of RBridges. If the number of OAM frames generated in the network is high, this can cause a CPU spike on destination RBridges if control-plane policing is not properly implemented or configured on destination RBridges. o trillOamMepTxLbmHC is used to set the Maximum Hop Count for the LBM. As OAM frames don't leak out of the TRILL network, it has no side effects. Kumar, et al. Standards Track [Page 44] RFC 7784 TRILL OAM MIB February 2016 o trillOamMepTxLbmReplyModeOob is used to indicate whether the reply is in or out of band. This object's vulnerability is covered as part of trillOamMepTransmitLbmReplyIp. o trillOamMepTxLbmFlowEntropy is used to indicate the customer flow and find the exact path in the network. The creation of valid flows is its intended purpose. If invalid flows are created on vulnerable system, they will be dropped in forwarding. o trillOamMepTxLbmDestRName is read-create, but it's not vulnerable as invalid-name routes won't be present and will be rejected by the OAM application as part of normal processing. o trillOamMepTxPtmHC is used to set the Maximum Hop Count for the PTM. As OAM frames don't leak out of the TRILL network, it has no side effect. o trillOamMepTxPtmReplyModeOob is used to indicate whether the reply is in or out of band. This object's vulnerability is covered as part of trillOamMepTransmitPtmReplyIp. o trillOamMepTxPtmFlowEntropy is used to indicate the customer flow and find the exact path in the network. Creation of valid flows is its intended purpose. If invalid flows are created on vulnerable systems, they will be dropped in forwarding. o trillOamMepTxPtmDestRName is read-create, but it's not vulnerable as invalid-name routes won't be present and will be rejected by the OAM application as part of normal processing. o trillOamMepTxPtmStatus is required for normal PTM operation. o trillOamMepTxPtmResultOK is required for normal PTM operation. o trillOamMepTxPtmSeqNumber is required for normal PTM operation. o trillOamMepTxPtmMessages is required for normal PTM operation. o trillOamMepTxMtvmTree is required for normal MTVM operation. o trillOamMepTxMtvmHC is used to set the Maximum Hop Count for the MTVM. As OAM frames don't leak out of the TRILL network, it has no side effect o trillOamMepTxMtvmReplyModeOob is used to indicate whether the reply is in or out of band. This object's vulnerability is covered as part of trillOamMepTransmitMtmReplyIp Kumar, et al. Standards Track [Page 45] RFC 7784 TRILL OAM MIB February 2016 o trillOamMepTxMtvmFlowEntropy is used to indicate the customer flow and find the exact path in the network. Creation of valid flows is its intended purpose. If invalid flows are created on vulnerable systems, they will be dropped in forwarding. o trillOamMepTxMtvmStatus is required for normal MTVM operation. o trillOamMepTxMtvmResultOK, trillOamMepTxMtvmMessages, trillOamMepTxMtvmSeqNumber, and trillOamMepTxMtvmScopeList are required for normal MTVM operation. trillOamMepTransmitLbmReplyIp, trillOamMepTransmitPtmReplyIp, and trillOamMepTransmitMtvmReplyIp allow setting of the IP address to which reports are sent; thus, it can be used for denial of service for that IP. Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. It is thus important to control even GET and/or NOTIFY access to these objects and possibly to even encrypt the values of these objects when sending them over the network via SNMP. For example, Path Trace messages expose the unicast topology of the network and Multi-destination Tree Verification Messages expose the multicast tree topology of the network. This information should not be available to all users of the network. SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPsec), there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module. Implementation should provide the security features described by the SNMPv3 framework (see [RFC3410]), and implementations claiming compliance to the SNMPv3 standard MUST include full support for authentication and privacy via the User-based Security Model (USM) [RFC3414] with the AES cipher algorithm [RFC3826]. Implementations MAY also provide support for the Transport Security Model (TSM) [RFC5591] in combination with a secure transport such as SSH [RFC5592] or TLS/DTLS [RFC6353]. Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give only those Kumar, et al. Standards Track [Page 46] RFC 7784 TRILL OAM MIB February 2016 principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them. 9. IANA Considerations The MIB module in this document uses the following IANA-assigned OBJECT IDENTIFIER value recorded in the SMI Numbers registry: Descriptor OBJECT IDENTIFIER value ---------------------------------------- trillOamMIB { mib-2 238 } 10. References 10.1. Normative References [802.1Q] IEEE, "IEEE Standard for Local and metropolitan area networks -- Media Access Control (MAC) Bridges and Virtual Bridge Local Area Networks", IEEE Std 802.1Q-2011, DOI 10.1109/IEEESTD.2011.6009146. [IEEE8021-CFM-MIB] IEEE, "Connectivity Fault Management module for managing IEEE 802.1ag", IEEE 802.1ag, October 2008, <http://www.ieee802.org/1/files/public/MIBs/IEEE8021-CFM- MIB-200810150000Z.txt>. [LLDP-MIB] IEEE, "Management Information Base module for LLDP configuration, statistics, local system data and remote systems data components", IEEE 802.1AB, May 2005, <http://www.ieee802.org/1/files/public/MIBs/ LLDP-MIB-200505060000Z.txt>. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <http://www.rfc-editor.org/info/rfc2119>. [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, DOI 10.17487/RFC2578, April 1999, <http://www.rfc-editor.org/info/rfc2578>. [RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD 58, RFC 2579, DOI 10.17487/RFC2579, April 1999, <http://www.rfc-editor.org/info/rfc2579>. Kumar, et al. Standards Track [Page 47] RFC 7784 TRILL OAM MIB February 2016 [RFC2580] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Conformance Statements for SMIv2", STD 58, RFC 2580, DOI 10.17487/RFC2580, April 1999, <http://www.rfc-editor.org/info/rfc2580>. [RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)", STD 62, RFC 3414, DOI 10.17487/RFC3414, December 2002, <http://www.rfc-editor.org/info/rfc3414>. [RFC3826] Blumenthal, U., Maino, F., and K. McCloghrie, "The Advanced Encryption Standard (AES) Cipher Algorithm in the SNMP User-based Security Model", RFC 3826, DOI 10.17487/RFC3826, June 2004, <http://www.rfc-editor.org/info/rfc3826>. [RFC5591] Harrington, D. and W. Hardaker, "Transport Security Model for the Simple Network Management Protocol (SNMP)", STD 78, RFC 5591, DOI 10.17487/RFC5591, June 2009, <http://www.rfc-editor.org/info/rfc5591>. [RFC5592] Harrington, D., Salowey, J., and W. Hardaker, "Secure Shell Transport Model for the Simple Network Management Protocol (SNMP)", RFC 5592, DOI 10.17487/RFC5592, June 2009, <http://www.rfc-editor.org/info/rfc5592>. [RFC6325] Perlman, R., Eastlake 3rd, D., Dutt, D., Gai, S., and A. Ghanwani, "Routing Bridges (RBridges): Base Protocol Specification", RFC 6325, DOI 10.17487/RFC6325, July 2011, <http://www.rfc-editor.org/info/rfc6325>. [RFC6353] Hardaker, W., "Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP)", STD 78, RFC 6353, DOI 10.17487/RFC6353, July 2011, <http://www.rfc-editor.org/info/rfc6353>. [RFC7172] Eastlake 3rd, D., Zhang, M., Agarwal, P., Perlman, R., and D. Dutt, "Transparent Interconnection of Lots of Links (TRILL): Fine-Grained Labeling", RFC 7172, DOI 10.17487/RFC7172, May 2014, <http://www.rfc-editor.org/info/rfc7172>. [RFC7455] Senevirathne, T., Finn, N., Salam, S., Kumar, D., Eastlake 3rd, D., Aldrin, S., and Y. Li, "Transparent Interconnection of Lots of Links (TRILL): Fault Management", RFC 7455, DOI 10.17487/RFC7455, March 2015, <http://www.rfc-editor.org/info/rfc7455>. Kumar, et al. Standards Track [Page 48] RFC 7784 TRILL OAM MIB February 2016 10.2. Informative References [Q.840.1] ITU-T, "Requirements and analysis for NMS-EMS management interface of Ethernet over Transport and Metro Ethernet Network (EoT/MEN)", Recommendation Q.840.1, March 2007. [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet- Standard Management Framework", RFC 3410, DOI 10.17487/RFC3410, December 2002, <http://www.rfc-editor.org/info/rfc3410>. [RFC6905] Senevirathne, T., Bond, D., Aldrin, S., Li, Y., and R. Watve, "Requirements for Operations, Administration, and Maintenance (OAM) in Transparent Interconnection of Lots of Links (TRILL)", RFC 6905, DOI 10.17487/RFC6905, March 2013, <http://www.rfc-editor.org/info/rfc6905>. [RFC7174] Salam, S., Senevirathne, T., Aldrin, S., and D. Eastlake 3rd, "Transparent Interconnection of Lots of Links (TRILL) Operations, Administration, and Maintenance (OAM) Framework", RFC 7174, DOI 10.17487/RFC7174, May 2014, <http://www.rfc-editor.org/info/rfc7174>. Kumar, et al. Standards Track [Page 49] RFC 7784 TRILL OAM MIB February 2016 Acknowledgments We wish to thank members of the IETF TRILL WG and the MIB Doctors for their comments and suggestions. Detailed comments were provided by Sam Aldrin, Donald Eastlake, Tom Taylor, and Harrie Hazewinkel. Authors' Addresses Deepak Kumar Cisco 510 McCarthy Blvd. Milpitas, CA 95035 United States Phone : +1 408-853-9760 Email: dekumar@cisco.com Samer Salam Cisco 595 Burrard St. Suite 2123 Vancouver, BC V7X 1J1 Canada Email: ssalam@cisco.com Tissa Senevirathne Consultant Email: tsenevir@gmail.com Kumar, et al. Standards Track [Page 50]