💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc6083.txt captured on 2021-12-04 at 18:04:22.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Internet Engineering Task Force (IETF) M. Tuexen
Request for Comments: 6083 R. Seggelmann
Category: Standards Track Muenster Univ. of Applied Sciences
ISSN: 2070-1721 E. Rescorla
RTFM, Inc.
January 2011
Datagram Transport Layer Security (DTLS)
for Stream Control Transmission Protocol (SCTP)
Abstract
This document describes the usage of the Datagram Transport Layer
Security (DTLS) protocol over the Stream Control Transmission
Protocol (SCTP).
DTLS over SCTP provides communications privacy for applications that
use SCTP as their transport protocol and allows client/server
applications to communicate in a way that is designed to prevent
eavesdropping and detect tampering or message forgery.
Applications using DTLS over SCTP can use almost all transport
features provided by SCTP and its extensions.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc6083.
Tuexen, et al. Standards Track [Page 1]
RFC 6083 DTLS for SCTP January 2011
Copyright Notice
Copyright (c) 2011 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. DTLS Considerations . . . . . . . . . . . . . . . . . . . . . . 4
4. SCTP Considerations . . . . . . . . . . . . . . . . . . . . . . 5
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 7
6. Security Considerations . . . . . . . . . . . . . . . . . . . . 7
7. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . 8
8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1. Introduction
1.1. Overview
This document describes the usage of the Datagram Transport Layer
Security (DTLS) protocol, as defined in [RFC4347], over the Stream
Control Transmission Protocol (SCTP), as defined in [RFC4960].
DTLS over SCTP provides communications privacy for applications that
use SCTP as their transport protocol and allows client/server
applications to communicate in a way that is designed to prevent
eavesdropping and detect tampering or message forgery.
Applications using DTLS over SCTP can use almost all transport
features provided by SCTP and its extensions.
TLS, from which DTLS was derived, is designed to run on top of a
byte-stream-oriented transport protocol providing a reliable, in-
sequence delivery. Thus, TLS is currently mainly being used on top
of the Transmission Control Protocol (TCP), as defined in [RFC0793].
Tuexen, et al. Standards Track [Page 2]
RFC 6083 DTLS for SCTP January 2011
TLS over SCTP as described in [RFC3436] has some serious limitations:
o It does not support the unordered delivery of SCTP user messages.
o It does not support partial reliability as defined in [RFC3758].
o It only supports the usage of the same number of streams in both
directions.
o It uses a TLS connection for every bidirectional stream, which
requires a substantial amount of resources and message exchanges
if a large number of streams is used.
DTLS over SCTP as described in this document overcomes these
limitations of TLS over SCTP. In particular, DTLS/SCTP supports:
o preservation of message boundaries.
o a large number of unidirectional and bidirectional streams.
o ordered and unordered delivery of SCTP user messages.
o the partial reliability extension as defined in [RFC3758].
o the dynamic address reconfiguration extension as defined in
[RFC5061].
However, the following limitations still apply:
o The maximum user message size is 2^14 bytes, which is the DTLS
limit.
o The DTLS user cannot perform the SCTP-AUTH key management because
this is done by the DTLS layer.
The method described in this document requires that the SCTP
implementation supports the optional feature of fragmentation of SCTP
user messages as defined in [RFC4960] and the SCTP authentication
extension defined in [RFC4895].
1.2. Terminology
This document uses the following terms:
Association: An SCTP association.
Stream: A unidirectional stream of an SCTP association. It is
uniquely identified by a stream identifier.
Tuexen, et al. Standards Track [Page 3]
RFC 6083 DTLS for SCTP January 2011
1.3. Abbreviations
DTLS: Datagram Transport Layer Security
MTU: Maximum Transmission Unit
PPID: Payload Protocol Identifier
SCTP: Stream Control Transmission Protocol
TCP: Transmission Control Protocol
TLS: Transport Layer Security
2. Conventions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
3. DTLS Considerations
3.1. Version of DTLS
This document is based on [RFC4347], and it is expected that DTLS/
SCTP as described in this document will work with future versions of
DTLS.
3.2. Message Sizes
DTLS limits the DTLS user message size to the current Path MTU minus
the header sizes. For the purposes of running over SCTP, the DTLS
path MTU MUST be considered to be 2^14.
3.3. Replay Detection
The replay detection of DTLS may result in the DTLS layer dropping
messages. Since DTLS/SCTP provides a reliable service if requested
by the application, replay detection cannot be used. Therefore,
replay detection of DTLS MUST NOT be used.
3.4. Path MTU Discovery
SCTP provides Path MTU discovery and fragmentation/reassembly for
user messages. According to Section 3.2, DTLS can send maximum sized
messages. Therefore, Path MTU discovery of DTLS MUST NOT be used.
Tuexen, et al. Standards Track [Page 4]
RFC 6083 DTLS for SCTP January 2011
3.5. Retransmission of Messages
SCTP provides a reliable and in-sequence transport service for DTLS
messages that require it. See Section 4.4. Therefore, DTLS
procedures for retransmissions MUST NOT be used.
4. SCTP Considerations
4.1. Mapping of DTLS Records
The supported maximum length of SCTP user messages MUST be at least
2^14 + 2048 + 13 = 18445 bytes (2^14 + 2048 is the maximum length of
the DTLSCiphertext.fragment, and 13 is the size of the DTLS record
header). In particular, the SCTP implementation MUST support
fragmentation of user messages.
Every SCTP user message MUST consist of exactly one DTLS record.
4.2. DTLS Connection Handling
Each DTLS connection MUST be established and terminated within the
same SCTP association. A DTLS connection MUST NOT span multiple SCTP
associations.
4.3. Payload Protocol Identifier Usage
Application protocols using DTLS over SCTP SHOULD register and use a
separate payload protocol identifier (PPID) and SHOULD NOT reuse the
PPID that they registered for running directly over SCTP.
Using the same PPID does not harm as long as the application can
determine whether or not DTLS is used. However, for protocol
analyzers, for example, it is much easier if a separate PPID is used.
This means, in particular, that there is no specific PPID for DTLS.
4.4. Stream Usage
All DTLS messages of the ChangeCipherSpec, Alert, or Handshake
protocol MUST be transported on stream 0 with unlimited reliability
and with the ordered delivery feature.
DTLS messages of the ApplicationData protocol SHOULD use multiple
streams other than stream 0; they MAY use stream 0 for everything if
they do not care about minimizing head of line blocking.
Tuexen, et al. Standards Track [Page 5]
RFC 6083 DTLS for SCTP January 2011
4.5. Chunk Handling
DATA chunks of SCTP MUST be sent in an authenticated way as described
in [RFC4895]. Other chunks MAY be sent in an authenticated way.
This makes sure that an attacker cannot modify the stream in which a
message is sent or affect the ordered/unordered delivery of the
message.
If PR-SCTP as defined in [RFC3758] is used, FORWARD-TSN chunks MUST
also be sent in an authenticated way as described in [RFC4895]. This
makes sure that it is not possible for an attacker to drop messages
and use forged FORWARD-TSN, SACK, and/or SHUTDOWN chunks to hide this
dropping.
4.6. Renegotiation
DTLS supports renegotiation, and therefore this feature is also
available by DTLS/SCTP. It is up to the upper layer to use/allow it
or not. Application writers should be aware that allowing
renegotiations may result in changes of security parameters.
4.7. Handshake
A DTLS implementation discards DTLS messages from older epochs after
some time, as described in Section 4.1 of [RFC4347]. This is not
acceptable when the DTLS user performs a reliable data transfer. To
avoid discarding messages, the following procedures are required.
Before sending a ChangeCipherSpec message, all outstanding SCTP user
messages MUST have been acknowledged by the SCTP peer and MUST NOT be
revoked by the SCTP peer.
Prior to processing a received ChangeCipherSpec, all other received
SCTP user messages that are buffered in the SCTP layer MUST be read
and processed by DTLS.
User messages that arrive between ChangeCipherSpec and Finished
messages and use the new epoch have probably passed the Finished
message and MUST be buffered by DTLS until the Finished message is
read.
4.8. Handling of Endpoint-Pair Shared Secrets
The endpoint-pair shared secret for Shared Key Identifier 0 is empty
and MUST be used when establishing a DTLS connection. Whenever the
master key changes, a 64-byte shared secret is derived from every
master secret and provided as a new endpoint-pair shared secret by
using the exporter described in [RFC5705]. The exporter MUST use the
Tuexen, et al. Standards Track [Page 6]
RFC 6083 DTLS for SCTP January 2011
label given in Section 5 and no context. The new Shared Key
Identifier MUST be the old Shared Key Identifier incremented by 1.
If the old one is 65535, the new one MUST be 1.
Before sending the Finished message, the active SCTP-AUTH key MUST be
switched to the new one.
Once the corresponding Finished message from the peer has been
received, the old SCTP-AUTH key SHOULD be removed.
4.9. Shutdown
To prevent DTLS from discarding DTLS user messages while it is
shutting down, a CloseNotify message MUST only be sent after all
outstanding SCTP user messages have been acknowledged by the SCTP
peer and MUST NOT still be revoked by the SCTP peer.
Prior to processing a received CloseNotify, all other received SCTP
user messages that are buffered in the SCTP layer MUST be read and
processed by DTLS.
5. IANA Considerations
IANA added a value to the TLS Exporter Label registry as described in
[RFC5705]. The label is "EXPORTER_DTLS_OVER_SCTP".
6. Security Considerations
The security considerations given in [RFC4347], [RFC4895], and
[RFC4960] also apply to this document.
It is possible to authenticate DTLS endpoints based on IP addresses
in certificates. SCTP associations can use multiple addresses per
SCTP endpoint. Therefore, it is possible that DTLS records will be
sent from a different IP address than that originally authenticated.
This is not a problem provided that no security decisions are made
based on that IP address. This is a special case of a general rule:
all decisions should be based on the peer's authenticated identity,
not on its transport layer identity.
For each message, the SCTP user also provides a stream identifier, a
flag to indicate whether the message is sent ordered or unordered,
and a payload protocol identifier. Although DTLS can be used to
provide privacy for the actual user message, none of these three are
protected by DTLS. They are sent as clear text, because they are
part of the SCTP DATA chunk header.
Tuexen, et al. Standards Track [Page 7]
RFC 6083 DTLS for SCTP January 2011
DTLS supports cipher suites that contain a NULL cipher algorithm.
Negotiating a NULL cipher algorithm will not provide communications
privacy for applications and will not provide privacy for user
messages.
7. Acknowledgments
The authors wish to thank Anna Brunstrom, Lars Eggert, Gorry
Fairhurst, Ian Goldberg, Alfred Hoenes, Carsten Hohendorf, Stefan
Lindskog, Daniel Mentz, and Sean Turner for their invaluable
comments.
8. References
8.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC3758] Stewart, R., Ramalho, M., Xie, Q., Tuexen, M., and P.
Conrad, "Stream Control Transmission Protocol (SCTP)
Partial Reliability Extension", RFC 3758, May 2004.
[RFC4347] Rescorla, E. and N. Modadugu, "Datagram Transport Layer
Security", RFC 4347, April 2006.
[RFC4895] Tuexen, M., Stewart, R., Lei, P., and E. Rescorla,
"Authenticated Chunks for the Stream Control Transmission
Protocol (SCTP)", RFC 4895, August 2007.
[RFC4960] Stewart, R., "Stream Control Transmission Protocol",
RFC 4960, September 2007.
[RFC5705] Rescorla, E., "Keying Material Exporters for Transport
Layer Security (TLS)", RFC 5705, March 2010.
8.2. Informative References
[RFC0793] Postel, J., "Transmission Control Protocol", STD 7,
RFC 793, September 1981.
[RFC3436] Jungmaier, A., Rescorla, E., and M. Tuexen, "Transport
Layer Security over Stream Control Transmission Protocol",
RFC 3436, December 2002.
Tuexen, et al. Standards Track [Page 8]
RFC 6083 DTLS for SCTP January 2011
[RFC5061] Stewart, R., Xie, Q., Tuexen, M., Maruyama, S., and M.
Kozuka, "Stream Control Transmission Protocol (SCTP)
Dynamic Address Reconfiguration", RFC 5061,
September 2007.
Authors' Addresses
Michael Tuexen
Muenster University of Applied Sciences
Stegerwaldstr. 39
48565 Steinfurt
Germany
EMail: tuexen@fh-muenster.de
Robin Seggelmann
Muenster University of Applied Sciences
Stegerwaldstr. 39
48565 Steinfurt
Germany
EMail: seggelmann@fh-muenster.de
Eric Rescorla
RTFM, Inc.
2064 Edgewood Drive
Palo Alto, CA 94303
USA
EMail: ekr@networkresonance.com
Tuexen, et al. Standards Track [Page 9]