💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc1459.txt captured on 2021-12-05 at 23:47:19.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Network Working Group J. Oikarinen
Request for Comments: 1459 D. Reed
May 1993
Internet Relay Chat Protocol
Status of This Memo
This memo defines an Experimental Protocol for the Internet
community. Discussion and suggestions for improvement are requested.
Please refer to the current edition of the "IAB Official Protocol
Standards" for the standardization state and status of this protocol.
Distribution of this memo is unlimited.
Abstract
The IRC protocol was developed over the last 4 years since it was
first implemented as a means for users on a BBS to chat amongst
themselves. Now it supports a world-wide network of servers and
clients, and is stringing to cope with growth. Over the past 2 years,
the average number of users connected to the main IRC network has
grown by a factor of 10.
The IRC protocol is a text-based protocol, with the simplest client
being any socket program capable of connecting to the server.
Table of Contents
1. INTRODUCTION ............................................... 4
1.1 Servers ................................................ 4
1.2 Clients ................................................ 5
1.2.1 Operators .......................................... 5
1.3 Channels ................................................ 5
1.3.1 Channel Operators .................................... 6
2. THE IRC SPECIFICATION ....................................... 7
2.1 Overview ................................................ 7
2.2 Character codes ......................................... 7
2.3 Messages ................................................ 7
2.3.1 Message format in 'pseudo' BNF .................... 8
2.4 Numeric replies ......................................... 10
3. IRC Concepts ................................................ 10
3.1 One-to-one communication ................................ 10
3.2 One-to-many ............................................. 11
3.2.1 To a list .......................................... 11
3.2.2 To a group (channel) ............................... 11
3.2.3 To a host/server mask .............................. 12
3.3 One to all .............................................. 12
Oikarinen & Reed [Page 1]
RFC 1459 Internet Relay Chat Protocol May 1993
3.3.1 Client to Client ................................... 12
3.3.2 Clients to Server .................................. 12
3.3.3 Server to Server ................................... 12
4. MESSAGE DETAILS ............................................. 13
4.1 Connection Registration ................................. 13
4.1.1 Password message ................................... 14
4.1.2 Nickname message ................................... 14
4.1.3 User message ....................................... 15
4.1.4 Server message ..................................... 16
4.1.5 Operator message ................................... 17
4.1.6 Quit message ....................................... 17
4.1.7 Server Quit message ................................ 18
4.2 Channel operations ...................................... 19
4.2.1 Join message ....................................... 19
4.2.2 Part message ....................................... 20
4.2.3 Mode message ....................................... 21
4.2.3.1 Channel modes ................................. 21
4.2.3.2 User modes .................................... 22
4.2.4 Topic message ...................................... 23
4.2.5 Names message ...................................... 24
4.2.6 List message ....................................... 24
4.2.7 Invite message ..................................... 25
4.2.8 Kick message ....................................... 25
4.3 Server queries and commands ............................. 26
4.3.1 Version message .................................... 26
4.3.2 Stats message ...................................... 27
4.3.3 Links message ...................................... 28
4.3.4 Time message ....................................... 29
4.3.5 Connect message .................................... 29
4.3.6 Trace message ...................................... 30
4.3.7 Admin message ...................................... 31
4.3.8 Info message ....................................... 31
4.4 Sending messages ........................................ 32
4.4.1 Private messages ................................... 32
4.4.2 Notice messages .................................... 33
4.5 User-based queries ...................................... 33
4.5.1 Who query .......................................... 33
4.5.2 Whois query ........................................ 34
4.5.3 Whowas message ..................................... 35
4.6 Miscellaneous messages .................................. 35
4.6.1 Kill message ....................................... 36
4.6.2 Ping message ....................................... 37
4.6.3 Pong message ....................................... 37
4.6.4 Error message ...................................... 38
5. OPTIONAL MESSAGES ........................................... 38
5.1 Away message ............................................ 38
5.2 Rehash command .......................................... 39
5.3 Restart command ......................................... 39
Oikarinen & Reed [Page 2]
RFC 1459 Internet Relay Chat Protocol May 1993
5.4 Summon message .......................................... 40
5.5 Users message ........................................... 40
5.6 Operwall command ........................................ 41
5.7 Userhost message ........................................ 42
5.8 Ison message ............................................ 42
6. REPLIES ..................................................... 43
6.1 Error Replies ........................................... 43
6.2 Command responses ....................................... 48
6.3 Reserved numerics ....................................... 56
7. Client and server authentication ............................ 56
8. Current Implementations Details ............................. 56
8.1 Network protocol: TCP ................................... 57
8.1.1 Support of Unix sockets ............................ 57
8.2 Command Parsing ......................................... 57
8.3 Message delivery ........................................ 57
8.4 Connection 'Liveness' ................................... 58
8.5 Establishing a server-client connection ................. 58
8.6 Establishing a server-server connection ................. 58
8.6.1 State information exchange when connecting ......... 59
8.7 Terminating server-client connections ................... 59
8.8 Terminating server-server connections ................... 59
8.9 Tracking nickname changes ............................... 60
8.10 Flood control of clients ............................... 60
8.11 Non-blocking lookups ................................... 61
8.11.1 Hostname (DNS) lookups ............................ 61
8.11.2 Username (Ident) lookups .......................... 61
8.12 Configuration file ..................................... 61
8.12.1 Allowing clients to connect ....................... 62
8.12.2 Operators ......................................... 62
8.12.3 Allowing servers to connect ....................... 62
8.12.4 Administrivia ..................................... 63
8.13 Channel membership ..................................... 63
9. Current problems ............................................ 63
9.1 Scalability ............................................. 63
9.2 Labels .................................................. 63
9.2.1 Nicknames .......................................... 63
9.2.2 Channels ........................................... 64
9.2.3 Servers ............................................ 64
9.3 Algorithms .............................................. 64
10. Support and availability ................................... 64
11. Security Considerations .................................... 65
12. Authors' Addresses ......................................... 65
Oikarinen & Reed [Page 3]
RFC 1459 Internet Relay Chat Protocol May 1993
1. INTRODUCTION
The IRC (Internet Relay Chat) protocol has been designed over a
number of years for use with text based conferencing. This document
describes the current IRC protocol.
The IRC protocol has been developed on systems using the TCP/IP
network protocol, although there is no requirement that this remain
the only sphere in which it operates.
IRC itself is a teleconferencing system, which (through the use of
the client-server model) is well-suited to running on many machines
in a distributed fashion. A typical setup involves a single process
(the server) forming a central point for clients (or other servers)
to connect to, performing the required message delivery/multiplexing
and other functions.
1.1 Servers
The server forms the backbone of IRC, providing a point to which
clients may connect to to talk to each other, and a point for other
servers to connect to, forming an IRC network. The only network
configuration allowed for IRC servers is that of a spanning tree [see
Fig. 1] where each server acts as a central node for the rest of the
net it sees.
[ Server 15 ] [ Server 13 ] [ Server 14]
/ \ /
/ \ /
[ Server 11 ] ------ [ Server 1 ] [ Server 12]
/ \ /
/ \ /
[ Server 2 ] [ Server 3 ]
/ \ \
/ \ \
[ Server 4 ] [ Server 5 ] [ Server 6 ]
/ | \ /
/ | \ /
/ | \____ /
/ | \ /
[ Server 7 ] [ Server 8 ] [ Server 9 ] [ Server 10 ]
:
[ etc. ]
:
[ Fig. 1. Format of IRC server network ]
Oikarinen & Reed [Page 4]
RFC 1459 Internet Relay Chat Protocol May 1993
1.2 Clients
A client is anything connecting to a server that is not another
server. Each client is distinguished from other clients by a unique
nickname having a maximum length of nine (9) characters. See the
protocol grammar rules for what may and may not be used in a
nickname. In addition to the nickname, all servers must have the
following information about all clients: the real name of the host
that the client is running on, the username of the client on that
host, and the server to which the client is connected.
1.2.1 Operators
To allow a reasonable amount of order to be kept within the IRC
network, a special class of clients (operators) is allowed to perform
general maintenance functions on the network. Although the powers
granted to an operator can be considered as 'dangerous', they are
nonetheless required. Operators should be able to perform basic
network tasks such as disconnecting and reconnecting servers as
needed to prevent long-term use of bad network routing. In
recognition of this need, the protocol discussed herein provides for
operators only to be able to perform such functions. See sections
4.1.7 (SQUIT) and 4.3.5 (CONNECT).
A more controversial power of operators is the ability to remove a
user from the connected network by 'force', i.e. operators are able
to close the connection between any client and server. The
justification for this is delicate since its abuse is both
destructive and annoying. For further details on this type of
action, see section 4.6.1 (KILL).
1.3 Channels
A channel is a named group of one or more clients which will all
receive messages addressed to that channel. The channel is created
implicitly when the first client joins it, and the channel ceases to
exist when the last client leaves it. While channel exists, any
client can reference the channel using the name of the channel.
Channels names are strings (beginning with a '&' or '#' character) of
length up to 200 characters. Apart from the the requirement that the
first character being either '&' or '#'; the only restriction on a
channel name is that it may not contain any spaces (' '), a control G
(^G or ASCII 7), or a comma (',' which is used as a list item
separator by the protocol).
There are two types of channels allowed by this protocol. One is a
distributed channel which is known to all the servers that are
Oikarinen & Reed [Page 5]
RFC 1459 Internet Relay Chat Protocol May 1993
connected to the network. These channels are marked by the first
character being a only clients on the server where it exists may join
it. These are distinguished by a leading '&' character. On top of
these two types, there are the various channel modes available to
alter the characteristics of individual channels. See section 4.2.3
(MODE command) for more details on this.
To create a new channel or become part of an existing channel, a user
is required to JOIN the channel. If the channel doesn't exist prior
to joining, the channel is created and the creating user becomes a
channel operator. If the channel already exists, whether or not your
request to JOIN that channel is honoured depends on the current modes
of the channel. For example, if the channel is invite-only, (+i),
then you may only join if invited. As part of the protocol, a user
may be a part of several channels at once, but a limit of ten (10)
channels is recommended as being ample for both experienced and
novice users. See section 8.13 for more information on this.
If the IRC network becomes disjoint because of a split between two
servers, the channel on each side is only composed of those clients
which are connected to servers on the respective sides of the split,
possibly ceasing to exist on one side of the split. When the split
is healed, the connecting servers announce to each other who they
think is in each channel and the mode of that channel. If the
channel exists on both sides, the JOINs and MODEs are interpreted in
an inclusive manner so that both sides of the new connection will
agree about which clients are in the channel and what modes the
channel has.
1.3.1 Channel Operators
The channel operator (also referred to as a "chop" or "chanop") on a
given channel is considered to 'own' that channel. In recognition of
this status, channel operators are endowed with certain powers which
enable them to keep control and some sort of sanity in their channel.
As an owner of a channel, a channel operator is not required to have
reasons for their actions, although if their actions are generally
antisocial or otherwise abusive, it might be reasonable to ask an IRC
operator to intervene, or for the usersjust leave and go elsewhere
and form their own channel.
The commands which may only be used by channel operators are:
KICK - Eject a client from the channel
MODE - Change the channel's mode
INVITE - Invite a client to an invite-only channel (mode +i)
TOPIC - Change the channel topic in a mode +t channel
Oikarinen & Reed [Page 6]
RFC 1459 Internet Relay Chat Protocol May 1993
A channel operator is identified by the '@' symbol next to their
nickname whenever it is associated with a channel (ie replies to the
NAMES, WHO and WHOIS commands).
2. The IRC Specification
2.1 Overview
The protocol as described herein is for use both with server to
server and client to server connections. There are, however, more
restrictions on client connections (which are considered to be
untrustworthy) than on server connections.
2.2 Character codes
No specific character set is specified. The protocol is based on a a
set of codes which are composed of eight (8) bits, making up an
octet. Each message may be composed of any number of these octets;
however, some octet values are used for control codes which act as
message delimiters.
Regardless of being an 8-bit protocol, the delimiters and keywords
are such that protocol is mostly usable from USASCII terminal and a
telnet connection.
Because of IRC's scandanavian origin, the characters {}| are
considered to be the lower case equivalents of the characters []\,
respectively. This is a critical issue when determining the
equivalence of two nicknames.
2.3 Messages
Servers and clients send eachother messages which may or may not
generate a reply. If the message contains a valid command, as
described in later sections, the client should expect a reply as
specified but it is not advised to wait forever for the reply; client
to server and server to server communication is essentially
asynchronous in nature.
Each IRC message may consist of up to three main parts: the prefix
(optional), the command, and the command parameters (of which there
may be up to 15). The prefix, command, and all parameters are
separated by one (or more) ASCII space character(s) (0x20).
The presence of a prefix is indicated with a single leading ASCII
colon character (':', 0x3b), which must be the first character of the
message itself. There must be no gap (whitespace) between the colon
and the prefix. The prefix is used by servers to indicate the true
Oikarinen & Reed [Page 7]
RFC 1459 Internet Relay Chat Protocol May 1993
origin of the message. If the prefix is missing from the message, it
is assumed to have originated from the connection from which it was
received. Clients should not use prefix when sending a message from
themselves; if they use a prefix, the only valid prefix is the
registered nickname associated with the client. If the source
identified by the prefix cannot be found from the server's internal
database, or if the source is registered from a different link than
from which the message arrived, the server must ignore the message
silently.
The command must either be a valid IRC command or a three (3) digit
number represented in ASCII text.
IRC messages are always lines of characters terminated with a CR-LF
(Carriage Return - Line Feed) pair, and these messages shall not
exceed 512 characters in length, counting all characters including
the trailing CR-LF. Thus, there are 510 characters maximum allowed
for the command and its parameters. There is no provision for
continuation message lines. See section 7 for more details about
current implementations.
2.3.1 Message format in 'pseudo' BNF
The protocol messages must be extracted from the contiguous stream of
octets. The current solution is to designate two characters, CR and
LF, as message separators. Empty messages are silently ignored,
which permits use of the sequence CR-LF between messages
without extra problems.
The extracted message is parsed into the components <prefix>,
<command> and list of parameters matched either by <middle> or
<trailing> components.
The BNF representation for this is:
<message> ::= [':' <prefix> <SPACE> ] <command> <params> <crlf>
<prefix> ::= <servername> | <nick> [ '!' <user> ] [ '@' <host> ]
<command> ::= <letter> { <letter> } | <number> <number> <number>
<SPACE> ::= ' ' { ' ' }
<params> ::= <SPACE> [ ':' <trailing> | <middle> <params> ]
<middle> ::= <Any *non-empty* sequence of octets not including SPACE
or NUL or CR or LF, the first of which may not be ':'>
<trailing> ::= <Any, possibly *empty*, sequence of octets not including
NUL or CR or LF>
<crlf> ::= CR LF
Oikarinen & Reed [Page 8]
RFC 1459 Internet Relay Chat Protocol May 1993
NOTES:
1) <SPACE> is consists only of SPACE character(s) (0x20).
Specially notice that TABULATION, and all other control
characters are considered NON-WHITE-SPACE.
2) After extracting the parameter list, all parameters are equal,
whether matched by <middle> or <trailing>. <Trailing> is just
a syntactic trick to allow SPACE within parameter.
3) The fact that CR and LF cannot appear in parameter strings is
just artifact of the message framing. This might change later.
4) The NUL character is not special in message framing, and
basically could end up inside a parameter, but as it would
cause extra complexities in normal C string handling. Therefore
NUL is not allowed within messages.
5) The last parameter may be an empty string.
6) Use of the extended prefix (['!' <user> ] ['@' <host> ]) must
not be used in server to server communications and is only
intended for server to client messages in order to provide
clients with more useful information about who a message is
from without the need for additional queries.
Most protocol messages specify additional semantics and syntax for
the extracted parameter strings dictated by their position in the
list. For example, many server commands will assume that the first
parameter after the command is the list of targets, which can be
described with:
<target> ::= <to> [ "," <target> ]
<to> ::= <channel> | <user> '@' <servername> | <nick> | <mask>
<channel> ::= ('#' | '&') <chstring>
<servername> ::= <host>
<host> ::= see RFC 952 [DNS:4] for details on allowed hostnames
<nick> ::= <letter> { <letter> | <number> | <special> }
<mask> ::= ('#' | '