💾 Archived View for aphrack.org › issues › phrack15 › 5.gmi captured on 2021-12-04 at 18:04:22. Gemini links have been rewritten to link to archived content
⬅️ Previous capture (2021-12-03)
-=-=-=-=-=-=-
===== Phrack Magazine presents Phrack 15 =====
===== File 5 of 8 =====
GELLED FLAME FUELS
------------------
A text phile typed by Elric of Imrryr from the book:
Improvised Munitions Handbook (TM 31-210), published
by the Dept of the Army, 1969.
All information is provided only for information purposes
only. Construction and/or use may violate local, state, and/or
federal laws. (Unless your name is Ollie North)
Gelled or paste type fuels are often preferable to raw gasoline for
use in incendiary devices such as fire bottles. This type fuel adheres more
readily to the target and produces greater heat concentration.
Several methods are shown for gelling gasoline using commonly
available materials. The methods are divided into the following categories
based on the major ingredient:
1. Lye Systems
2. Lye-Alcohol Systems
3. Soap-Alcohol Systems
4. Egg White Systems
6. Wax Systems
Lye Systems
Lye (also know as caustic soda or Sodium Hydroxide) can be used in
combination with powdered rosin or castor oil to gel gasoline for use as a
flame fuel which will adhere to target surfaces.
MATERIALS REQUIRED:
------------------
Parts by Volume Ingredient How Used Common Source
--------------- ---------- -------- -------------
60 Gasoline Motor Fuel Gas station or motor vehicle
2 (flake) or Lye Drain cleaner, Food store or Drug store
1 (powder) making of soap
15 Rosin Manufacturing Paint store, chemical supply
Paint & Varnish house
or
Castor Oil Medicine Food and Drug stores
PROCEDURE
---------
______________________________________________________________________________
|CAUTION: Make sure that there are no open flames in the area when mixing |
|the flame fuel. NO SMOKING! |
|----------------------------------------------------------------------------|
1. Pour gasoline into jar, bottle or other container. (DO NOT USE AN ALUMINUM
CONTAINER.)
2. IF rosin is in cake form, crush into small pieces.
3. Add rosin or castor oil to the gasoline and stir for about five minutes to
mix thoroughly.
4. In a second container (NOT ALUMINUM) add lye to an equal volume of water
slowly with stirring.
______________________________________________________________________________
|CAUTION: Lye solution can burn skin and destroy clothing. If any is |
|spilled, wash away immediately with large quantities of water. |
|----------------------------------------------------------------------------|
5. Add lye solution to the gasoline mix and stir until mixture thickens (about
one minute).
NOTE: The sample will eventually thicken to a very firm paste. This can be
thinned, if desired, by stirring in additional gasoline.
Lye-Alcohol Systems
Lye (also know as caustic soda or Sodium Hydroxide) can be used in
combination with alcohol and any of several fats to gel gasoline for use as a
flame fuel.
MATERIALS REQUIRED:
------------------
Parts by Volume Ingredient How Used Common Source
--------------- ---------- -------- -------------
60 Gasoline Motor Fuel Gas station or motor vehicle
2 (flake) or Lye Drain cleaner, Food store or Drug store
1 (powder) making of soap
3 Ethyl Alcohol Whiskey Liquor store
Medicine Drug store
NOTE: Methyl (wood) alcohol or isopropyl (rubbing) alcohol can be substituted
for ethyl alcohol, but their use produces softer gels.
14 Tallow Food Fats rendered by cooking the
Making of soap meat or suet of animals.
NOTE: The following can be substituted for the tallow:
(a) Wool grease (Lanolin) (very good) -- Fat extracted from sheep wool
(b) Castor Oil (good)
(c) Any vegetable oil (corn, cottonseed, peanut, linseed, etc.)
(d) Any fish oil
(e) Butter or oleo margarine
It is necessary when using substitutes (c) to (e) to double the given amount
of fat and of lye for satisfactory body.
PROCEDURE
---------
______________________________________________________________________________
|CAUTION: Make sure that there are no open flames in the area when mixing |
|the flame fuel. NO SMOKING! |
|----------------------------------------------------------------------------|
1. Pour gasoline into jar, bottle or other container. (DO NOT USE AN ALUMINUM
CONTAINER.)
2. Add tallow (or substitute) to the gasoline and stir for about 1/2 minute to
dissolve fat.
3. Add alcohol to the gasoline mixture. Mix thoroughly.
4. In a separate container (NOT ALUMINUM) slowly add lye to an equal volume of
water. Mixture should be stirred constantly while adding lye.
______________________________________________________________________________
|CAUTION: Lye solution can burn skin and destroy clothing. If any is |
|spilled, wash away immediately with large quantities of water. |
|----------------------------------------------------------------------------|
5. Add lye solution to the gasoline mixture and stir occasionally until
thickened (about 1/2 hour)
NOTE: The sample will eventually (1 to 2 days) thicken to a very firm paste.
This can be thinned, if desired, by stirring in additional gasoline.
Soap-Alcohol System
Common household soap can be used in combination with alcohol to gel
gasoline for use as a flame fuel which will adhere to target surfaces.
MATERIALS REQUIRED:
------------------
Parts by Volume Ingredient How Used Common Source
--------------- ---------- -------- -------------
36 Gasoline Motor Fuel Gas station or motor vehicle
1 Ethyl Alcohol Whiskey Liquor store
Medicine Drug store
NOTE: Methyl (wood) alcohol or isopropyl (rubbing) alcohol can be substituted
for ethyl alcohol.
20 (powdered) or Laundry soap Washing clothes Stores
28 (flake)
NOTE: Unless the word "soap" actually appears somewhere on the container or
wrapper, a washing compound is probably a detergent. THESE CAN NOT BE USED.
PROCEDURE
---------
______________________________________________________________________________
|CAUTION: Make sure that there are no open flames in the area when mixing |
|the flame fuel. NO SMOKING! |
|----------------------------------------------------------------------------|
1. If bar soap is used, carve into thin flakes using a knife.
2. Pour Alcohol and gasoline into a jar, bottle or other container and mix
thoroughly.
3. Add soap powder or flakes to gasoline-alcohol mix and stir occasionally
until thickened (about 15 minutes).
Egg System
The white of any bird egg can be used to gel gasoline for use as a flame fuel.
MATERIALS REQUIRED:
------------------
Parts by Volume Ingredient How Used Common Source
--------------- ---------- -------- -------------
85 Gasoline Motor Fuel Gas station or motor vehicle
14 Egg Whites Food Food store, farms
Any one of the following
1 Table Salt Food, industrial Sea Water, Natural brine,
processes Food stores
3 Ground Coffee Food Food store
3 Dried Tea Food Food store
Leaves
3 Cocoa Food Food store
2 Sugar Food Food store
1 Saltpeter Pyrotechnics Drug store
(Niter) Explosives chemical supply store
(Potassium Matches
Nitrate) Medicine
1 Epsom salts Medicine Drug store, food store
industrial
processes
2 Washing soda Washing cleaner Food store
(Sal soda) Medicine Drug store
Photography Photo supply store
1 1/2 Baking soda Baking Food store
Manufacturing: Drug store
Beverages,
Mineral waters,
and Medicine
1 1/2 Aspirin Medicine Drug store
Food store
PROCEDURE
---------
______________________________________________________________________________
|CAUTION: Make sure that there are no open flames in the area when mixing |
|the flame fuel. NO SMOKING! |
|----------------------------------------------------------------------------|
1. Separate egg white from yolk. This can be done by breaking the egg into a
dish and carefully removing the yolk with a spoon.
______________________________________________________________________________
|NOTE: DO NOT GET THE YELLOW EGG YOLK MIXED INTO THE EGG WHITE. If egg yolk|
|gets into the egg white, discard the egg. |
|----------------------------------------------------------------------------|
2. Pour egg white into a jar, bottle, or other container and add gasoline.
3. Add the salt (or other additive) to the mixture and stir occasionally until
gel forms (about 5 to 10 minutes).
NOTE: A thicker flame fuel can be obtained by putting the capped jar in hot
(65 C) water for about 1/2 hour and then letting them cool to room
temperature. (DO NOT HEAT THE GELLED FUEL CONTAINING COFFEE).
Wax System
Any of several common waxes can be used to gel gasoline for use as a
flame fuel.
MATERIALS REQUIRED:
------------------
Parts by Volume Ingredient How Used Common Source
--------------- ---------- -------- -------------
80 Gasoline Motor Fuel Gas station or motor vehicle
20 Wax Leather polish, Food store, drug store,
(Ozocerite, sealing wax, department store
Mineral wax, candles,
fossil wax, waxed paper,
ceresin wax furniture &
beeswax) floor waxes,
lithographing.
PROCEDURE
---------
1. Melt the wax and pour into jar or bottle which has been placed in a hot
water bath.
2. Add gasoline to the bottle.
3. When wax has completely dissolved in the gasoline, allow the water bath to
cool slowly to room temperature.
NOTE: If a gel does not form, add additional wax (up to 40% by volume) and
repeat the above steps. If no gel forms with 40% wax, make a Lye solution by
dissolving a small amount of Lye (Sodium Hydroxide) in an equal amount of
water. Add this solution (1/2% by volume) to the gasoline wax mix and shake
bottle until a gel forms.
Well, that's it, I omitted a few things because they where either redundant,
or more aimed toward battle field conditions. Be careful, don't get caught,
and have fun...
Elric of Imrryr