💾 Archived View for gmi.noulin.net › rfc › rfc706.gmi captured on 2021-12-05 at 23:47:19. Gemini links have been rewritten to link to archived content

View Raw

More Information

-=-=-=-=-=-=-

Network Working Group                                     Jon Postel  (SRI-ARC)
Request for Comments: 706                                              Nov 1975
NIC #33861



                    On the Junk Mail Problem

In the ARPA Network Host/IMP interface protocol there is no
mechanism for the Host to selectively refuse messages. This means
that a Host which desires to receive some particular messages must
read all messages addressed to it. Such a Host could be sent many
messages by a malfunctioning Host. This would constitute a denial of
service to the normal users of this Host. Both the local users and
the network communication could suffer. The services denied are the
processor time consumed in examining the undesired messages and
rejecting them, and the loss of network thruput or increased delay
due to the unnecessary busyness of the network.

It would be useful for a Host to be able to decline messages from
sources it believes are misbehaving or are simply annoying. If the
Host/IMP interface protocol allowed the Host to say to the IMP
"refuse messages from Host X", the IMPs could discard the unwanted
messages at their earliest opportunity returning a "refused" notice
to the offending Host.

How the IMPs might do this is an open issue -- here are two
possibilities:

The destination IMP would keep a list (per local Host) of sources
to refuse (this has the disadvantage of keeping the network
busy).

The destination IMP on receiving the "refuse messages from Host
X" message forwards the message to the source IMP (the IMP local
to Host X). That IMP keeps a list (per local Host) of
destinations that are refusing messages from this source Host.

This restriction on messages might be removed by a destination Host
either by sending a "accept messages from Host X" message to the
IMP, or by resetting its Host/IMP interface.

A Host might make use of such a facility by measuring, per source,
the number of undesired messages per unit time, if this measure
exceeds a threshold then the Host could issue the "refuse messages
from Host X" message to the IMP.