💾 Archived View for gemini.bortzmeyer.org › rfc-mirror › rfc4458.txt captured on 2021-12-04 at 18:04:22.
⬅️ Previous capture (2021-11-30)
-=-=-=-=-=-=-
Network Working Group C. Jennings
Request for Comments: 4458 Cisco Systems
Category: Informational F. Audet
Nortel Networks
J. Elwell
Siemens plc
April 2006
Session Initiation Protocol (SIP) URIs for Applications
such as Voicemail and Interactive Voice Response (IVR)
Status of This Memo
This memo provides information for the Internet community. It does
not specify an Internet standard of any kind. Distribution of this
memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2006).
Abstract
The Session Initiation Protocol (SIP) is often used to initiate
connections to applications such as voicemail or interactive voice
recognition systems. This specification describes a convention for
forming SIP service URIs that request particular services based on
redirecting targets from such applications.
Jennings, et al. Informational [Page 1]
RFC 4458 SIP Voicemail URI April 2006
Table of Contents
1. Introduction ....................................................3
2. Mechanism (User Agent Server and Proxy) .........................4
2.1. Target .....................................................4
2.2. Cause ......................................................4
2.3. Retrieving Messages ........................................5
3. Interaction with Request History Information ....................5
4. Limitations of Voicemail URI ....................................6
5. Syntax ..........................................................6
6. Examples ........................................................7
6.1. Proxy Forwards Busy to Voicemail ...........................7
6.2. Endpoint Forwards Busy to Voicemail ........................9
6.3. Endpoint Forwards Busy to TDM via a Gateway ...............11
6.4. Endpoint Forwards Busy to Voicemail with History Info .....13
6.5. Zero Configuration UM System ..............................14
6.6. Call Coverage .............................................15
7. IANA Considerations ............................................15
8. Security Considerations ........................................16
8.1. Integrity Protection of Forwarding in SIP .................16
8.2. Privacy Related Issues on the Second Call Leg .............17
9. Acknowledgements ...............................................18
10. References ....................................................18
10.1. Normative References .....................................18
10.2. Informative References ...................................18
Jennings, et al. Informational [Page 2]
RFC 4458 SIP Voicemail URI April 2006
1. Introduction
Many applications such as Unified Messaging (UM) systems and
Interactive Voice Recognition (IVR) systems have been developed out
of traditional telephony. They can be used for storing and
interacting with voice, video, faxes, email, and instant messaging
services. Users often use SIP to initiate communications with these
applications. When a SIP call is routed to an application, it is
necessary that the application be able to obtain several bits of
information from the session initiation message so that it can
deliver the desired services.
For the purpose of this document, we will use UM as the main example,
but other applications may use the mechanism defined in this
document. The UM needs to know what mailbox should be used and
possible reasons for the type of service desired from the UM. Many
voicemail systems provide different greetings depending whether the
call went to voicemail because the user was busy or because the user
did not answer. All of this information can be delivered in existing
SIP signaling from the call control that retargets the call to the
UM, but there are no conventions for describing how the desired
mailbox and the service requested are expressed. It would be
possible for every vendor to make this configurable so that any site
could get it to work; however, this approach is unrealistic for
achieving interoperability among call control, gateway, and unified
messaging systems from different vendors. This specification
describes a convention for describing this mailbox and service
information in the SIP URI so that vendors and operators can build
interoperable systems.
If there were no need to interoperate with Time Division Multiplexing
(TDM)-based voicemail systems or to allow TDM systems to use VoIP
unified messaging systems, this problem would be a little easier to
solve. The problem that is introduced in the Voice over IP (VoIP) to
TDM case is as follows. The SIP system needs to tell a Public
Switched Telephone Network (PSTN) gateway both the subscriber's
mailbox identifier (which typically looks like a phone number) and
the address of the voicemail system in the TDM network (again a phone
number).
The question has been asked why the To header cannot be used to
specify which mailbox to use. One problem is that the call control
proxies cannot modify the To header, and the User Agent Clients
(UACs) often set it incorrectly because they do not have information
about the subscribers in the domain they are trying to call. This
happens because the routing of the call often translates the URI
multiple times before it results in an identifier for the desired
user that is valid in the namespace that the UM system understands.
Jennings, et al. Informational [Page 3]
RFC 4458 SIP Voicemail URI April 2006
2. Mechanism (User Agent Server and Proxy)
The mechanism works by encoding the information for the desired
service in the SIP Request-URI that is sent to the UM system. Two
chunks of information are encoded, the first being the target mailbox
to use and the second being the SIP status code that caused this
retargeting and that indicates the desired service. The userinfo and
hostport parts of the Request-URI will identify the voicemail
service, the target mailbox can be put in the target parameter, and
the reason can be put in the cause parameter. For example, if the
proxy wished to use Bob's mailbox because his phone was busy, the URI
sent to the UM system could be something like:
sip:voicemail@example.com;target=bob%40example.com;cause=486
2.1. Target
Target is a URI parameter that indicates the address of the
retargeting entity: in the context of UM, this can be the mailbox
number. For example, in the case of a voicemail system on the PSTN,
the user portion will contain the phone number of the voicemail
system, while the target will contain the phone number of the
subscriber's mailbox.
2.2. Cause
Cause is a URI parameter that is used to indicate the service that
the User Agent Server (UAS) receiving the message should perform.
The following values for this URI parameter are defined:
+---------------------------------+-------+
| Redirecting Reason | Value |
+---------------------------------+-------+
| Unknown/Not available | 404 |
| User busy | 486 |
| No reply | 408 |
| Unconditional | 302 |
| Deflection during alerting | 487 |
| Deflection immediate response | 480 |
| Mobile subscriber not reachable | 503 |
+---------------------------------+-------+
The mapping to PSTN protocols is important both for gateways that
connect the IP network to existing TDM customer's equipment, such as
Private Branch Exchanges (PBXs) and voicemail systems, and for
gateways that connect the IP network to the PSTN network. Integrated
Services Digital Network User Part (ISUP) has signaling encodings for
Jennings, et al. Informational [Page 4]
RFC 4458 SIP Voicemail URI April 2006
this information that can be treated as roughly equivalent for the
purposes here. For this reason, this specification uses the names of
Redirecting Reason values defined in ITU-T Q.732.2-5 [8]. In this
specification, the Redirecting Reason Values are referred to as
"Causes". It should be understood that the term "Cause" has nothing
to do with PSTN "Cause values" (as per ITU-T Q.850 [9] and RFC 3398
[5]) but are instead mapped to ITU-T Q.732.2-5 Redirecting Reasons.
Since ISUP interoperates with other PSTN networks, such as Q.931 [10]
and QSIG [11], using well-known rules, it makes sense to use the ISUP
names as the most appropriate superset. If no appropriate mapping to
a cause value defined in this specification exists in a network, it
would be mapped to 302 "Unconditional". Similarly, if the mapping
occurs from one of the causes defined in this specification to a PSTN
system that does not have an equivalent reason value, it would be
mapped to that network's equivalent of "Unconditional". If a new
cause parameter needs to be defined, this specification will have to
be updated.
The user portion of the URI SHOULD be used as the address of the
voicemail system on the PSTN, while the target SHOULD be mapped to
the original redirecting number on the PSTN side.
The redirection counters SHOULD be set to one unless additional
information is available.
2.3. Retrieving Messages
The UM system MAY use the fact that the From header is the same as
the URI target as a hint that the user wishes to retrieve messages.
3. Interaction with Request History Information
The Request History mechanism [6] provides more information relating
to multiple retargetings. It is reasonable to have systems in which
both the information in this specification and the History
information are included and one or both are used.
History-Info specifies a means of providing the UAS and UAC with
information about the retargeting of a request. This information
includes the initial Request-URI and any retarget-to URIs. This
information is placed in the History-Info header field, which, except
where prevented by privacy considerations, is built up as the request
progresses and, upon reaching the UAS, is returned in certain
responses.
History-Info, when deployed at relevant SIP entities, is intended to
provide a comprehensive trace of retargeting for a SIP request, along
with the SIP response codes that led to retargeting.
Jennings, et al. Informational [Page 5]
RFC 4458 SIP Voicemail URI April 2006
History-Info can complement this specification. In particular, when
a proxy inserts a URI containing the parameters defined in this
specification into the Request-URI of a forwarded request, the proxy
can also insert a History-Info header field entry into the forwarded
request, and the URI in that entry will incorporate these parameters.
Therefore, even if the Request-URI is replaced as a result of
rerouting by a downstream proxy, the History-Info header field will
still contain these parameters, which may be of use to the UAS.
Consequently, UASes that make use of this information may find the
information in the History-Info header and/or in the Request-URI,
depending on the capability of the proxy to support generation of
History-Info or on the behavior of downstream proxies; therefore,
applications need to take this into account.
4. Limitations of Voicemail URI
This specification requires the proxy that is requesting the service
to understand whether the UM system it is targeting supports the
syntax defined in this specification. Today, this information is
provided to the proxy by configuration. For practical purposes, this
means that the approach is unlikely to work in cases in which the
proxy is not configured with information about the UM system or in
which the UM is not in the same administrative domain.
This approach only works when the service that the call control wants
applied is fairly simple. For example, it does not allow the proxy
to express information like "Do not offer to connect to the target's
colleague because that address has already been tried".
The limitations discussed in this section are addressed by History-
Info [6].
5. Syntax
The ABNF[4] grammar for these parameters is shown below. The
definitions of pvalue and Status-Code are defined in the ABNF in RFC
3261[1].
target-param = "target" EQUAL pvalue
cause-param = "cause" EQUAL Status-Code
Note that the ABNF requires some characters to be escaped if they
occur in the value of the target parameters. For example, the "@"
character needs to be escaped.
Jennings, et al. Informational [Page 6]
RFC 4458 SIP Voicemail URI April 2006
6. Examples
This section provides some example use cases for the solution
proposed in this document. For the purpose of this document, UM is
used as the main example, but other applications may use this
mechanism. The examples are intended to highlight the potential
applicability of this solution and are not intended to limit its
applicability.
Also, the examples show just service retargeting on busy, but can
easily be adapted to show other forms of retargeting.
In several of the examples, the URIs are broken across more than one
line. This was only done for formatting and is not a valid SIP
message. Some of the characters in the URIs are not correctly
escaped to improve readability. The examples are all shown using
sip: with UDP transport, for readability. It should be understood
that using sips: with TLS transport is preferable.
6.1. Proxy Forwards Busy to Voicemail
In this example, Alice calls Bob. Bob's proxy determines that Bob is
busy, and the proxy forwards the call to Bob's voicemail. Alice's
phone is at 192.0.2.1, while Bob's phone is at 192.0.2.2. The
important thing to note is the URI in message F7.
Alice Proxy Bob voicemail
| | | |
| INVITE F1 | | |
|--------------->| INVITE F2 | |
| |------------->| |
|(100 Trying) F3 | | |
|<---------------| 486 Busy F4 | |
| |<-------------| |
| | ACK F5 | |
| |------------->| |
|(181 Call is Being Forwarded) F6 |
|<---------------| | INVITE F7 |
| |--------------------------------->|
* Rest of flow not shown *
Jennings, et al. Informational [Page 7]
RFC 4458 SIP Voicemail URI April 2006
F1: INVITE 192.0.2.1 -> proxy.example.com
INVITE sip:+15555551002@example.com;user=phone SIP/2.0
Via: SIP/2.0/TCP 192.0.2.1:5060;branch=z9hG4bK-74bf9
From: Alice <sip:+15551001@example.com;user=phone>;tag=9fxced76sl
To: sip:+15555551002@example.com;user=phone
Call-ID: c3x842276298220188511
CSeq: 1 INVITE
Max-Forwards: 70
Contact: <sip:alice@192.0.2.1>
Content-Type: application/sdp
Content-Length: *Body length goes here*
* SDP goes here*
F2: INVITE proxy.example.com -> 192.0.2.2
INVITE sip:+15555551002@192.0.2.2 SIP/2.0
Via: SIP/2.0/TCP 192.0.2.4:5060;branch=z9hG4bK-ik80k7g-1
Via: SIP/2.0/TCP 192.0.2.1:5060;branch=z9hG4bK-74bf9
From: Alice <sip:+15551001@example.com;user=phone>;tag=9fxced76sl
To: sip:+15555551002@example.com;user=phone
Call-ID: c3x842276298220188511
CSeq: 1 INVITE
Max-Forwards: 70
Contact: <sip:alice@192.0.2.1>
Content-Type: application/sdp
Content-Length: *Body length goes here*
* SDP goes here*
F4: 486 192.0.2.2 -> proxy.example.com
SIP/2.0 486 Busy Here
Via: SIP/2.0/TCP 192.0.2.4:5060;branch=z9hG4bK-ik80k7g-1
Via: SIP/2.0/TCP 192.0.2.1:5060;branch=z9hG4bK-74bf9
From: Alice <sip:+15551001@example.com;user=phone>;tag=9fxced76sl
To: sip:+15555551002@example.com;user=phone;tag=09xde23d80
Call-ID: c3x842276298220188511
CSeq: 1 INVITE
Content-Length: 0
Jennings, et al. Informational [Page 8]
RFC 4458 SIP Voicemail URI April 2006
F7: INVITE proxy.example.com -> um.example.com
INVITE sip:voicemail@example.com;\
target=sip:+15555551002%40example.com;user=phone;\
cause=486 SIP/2.0
Via: SIP/2.0/TCP 192.0.2.4:5060;branch=z9hG4bK-ik80k7g-2
Via: SIP/2.0/TCP 192.0.2.1:5060;branch=z9hG4bK-74bf9
From: Alice <sip:+15551001@example.com;user=phone>;tag=9fxced76sl
To: sip:+15555551002@example.com;user=phone
Call-ID: c3x842276298220188511
CSeq: 1 INVITE
Max-Forwards: 70
Contact: <sip:alice@192.0.2.1>
Content-Type: application/sdp
Content-Length: *Body length goes here*
* SDP goes here*
6.2. Endpoint Forwards Busy to Voicemail
In this example, Alice calls Bob. Bob is busy, but forwards the
session directly to his voicemail. Alice's phone is at 192.0.2.1,
while Bob's phone is at 192.0.2.2. The important thing to note is
the URI in the Contact in message F3.
Alice Proxy Bob voicemail
| | | |
| INVITE F1 | | |
|--------------->| INVITE F2 | |
| |------------->| |
| | 302 Moved F3 | |
| 302 Moved F4 |<-------------| |
|<---------------| | |
| ACK F5 | | |
|--------------->| ACK F6 | |
| |------------->| |
| INVITE F7 |
|-------------------------------------------------->|
* Rest of flow not shown *
Jennings, et al. Informational [Page 9]
RFC 4458 SIP Voicemail URI April 2006
F1: INVITE 192.0.2.1 -> proxy.example.com
INVITE sip:+15555551002@example.com;user=phone SIP/2.0
Via: SIP/2.0/TCP 192.0.2.1:5060;branch=z9hG4bK-74bf9
From: Alice <sip:+15551001@example.com;user=phone>;tag=9fxced76sl
To: sip:+15555551002@example.com;user=phone
Call-ID: c3x842276298220188511
CSeq: 1 INVITE
Max-Forwards: 70
Contact: <sip:alice@192.0.2.1>
Content-Type: application/sdp
Content-Length: *Body length goes here*
* SDP goes here*
F2: INVITE proxy.example.com -> 192.0.2.2
INVITE sip:line1@192.0.2.2 SIP/2.0
Via: SIP/2.0/TCP 192.0.2.4:5060;branch=z9hG4bK-ik80k7g-1
Via: SIP/2.0/TCP 192.0.2.1:5060;branch=z9hG4bK-74bf9
From: Alice <sip:+15551001@example.com;user=phone>;tag=9fxced76sl
To: sip:+15555551002@example.com;user=phone
Call-ID: c3x842276298220188511
CSeq: 1 INVITE
Max-Forwards: 70
Contact: <sip:alice@192.0.2.1>
Content-Type: application/sdp
Content-Length: *Body length goes here*
* SDP goes here*
F3: 302 192.0.2.2 -> proxy.example.com
SIP/2.0 302 Moved Temporarily
Via: SIP/2.0/TCP 192.0.2.4:5060;branch=z9hG4bK-ik80k7g-1
Via: SIP/2.0/TCP 192.0.2.1:5060;branch=z9hG4bK-74bf9
From: Alice <sip:+15551001@example.com;user=phone>;tag=9fxced76sl
To: sip:+15555551002@example.com;user=phone;tag=09xde23d80
Call-ID: c3x842276298220188511
CSeq: 1 INVITE
Contact: <sip: voicemail@example.com;\
target=sip:+15555551002%40example.com;user=phone;\
cause=486;>
Content-Length: 0
Jennings, et al. Informational [Page 10]
RFC 4458 SIP Voicemail URI April 2006
F7: INVITE proxy.example.com -> um.example.com
INVITE sip: voicemail@example.com;\
target=sip:+15555551002%40example.com;user=phone;\
cause=486 SIP/2.0
Via: SIP/2.0/TCP 192.0.2.4:5060;branch=z9hG4bK-ik80k7g-2
Via: SIP/2.0/TCP 192.0.2.1:5060;branch=z9hG4bK-74bf9
From: Alice <sip:+15551001@example.com;user=phone>;tag=9fxced76sl
To: sip:+15555551002@example.com;user=phone
Call-ID: c3x842276298220188511
CSeq: 1 INVITE
Max-Forwards: 70
Contact: <sip:alice@192.0.2.1>
Content-Type: application/sdp
Content-Length: *Body length goes here*
* SDP goes here*
6.3. Endpoint Forwards Busy to TDM via a Gateway
In this example, the voicemail is reached via a gateway to a TDM
network. Bob's number is +1 555 555-1002, while voicemail's number
on the TDM network is +1-555-555-2000.
The call flow is the same as in Section 6.2 except for the Contact
URI in F4 and the Request URI in F7.
Alice Proxy Bob voicemail
| | | |
| INVITE F1 | | |
|--------------->| INVITE F2 | |
| |------------->| |
|(100 Trying) F3 | | |
|<---------------| 302 Moved F4 | |
| |<-------------| |
| | ACK F5 | |
| |------------->| |
|(181 Call is Being Forwarded) F6 |
|<---------------| | INVITE F7 |
| |--------------------------------->|
* Rest of flow not shown *
Jennings, et al. Informational [Page 11]
RFC 4458 SIP Voicemail URI April 2006
F4: 486 192.0.2.2 -> proxy.example.com
SIP/2.0 302 Moved temporarily
Via: SIP/2.0/TCP 192.0.2.4:5060;branch=z9hG4bK-ik80k7g-1
Via: SIP/2.0/TCP 192.0.2.1:5060;branch=z9hG4bK-74bf9
From: Alice <sip:+15551001@example.com;user=phone>;tag=9fxced76sl
To: sip:+15555551002@example.com;user=phone;tag=09xde23d80
Call-ID: c3x842276298220188511
CSeq: 1 INVITE
Contact: <sip:+15555552000@example.com;user=phone;\
target=tel:+15555551002;cause=486>
Content-Length: 0
F7: INVITE proxy.example.com -> gw.example.com
INVITE sip:+15555552000@example.com;user=phone;\
target=tel:+15555551002;cause=486\
SIP/2.0
Via: SIP/2.0/TCP 192.0.2.4:5060;branch=z9hG4bK-ik80k7g-2
Via: SIP/2.0/TCP 192.0.2.1:5060;branch=z9hG4bK-74bf9
From: Alice <sip:+15551001@example.com;user=phone>;tag=9fxced76sl
To: sip:+15555551002@example.com;user=phone
Call-ID: c3x842276298220188511
CSeq: 1 INVITE
Max-Forwards: 70
Contact: <sip:alice@192.0.2.1;transport=tcp>
Content-Type: application/sdp
Content-Length: *Body length goes here*
* SDP goes here*
Jennings, et al. Informational [Page 12]
RFC 4458 SIP Voicemail URI April 2006
6.4. Endpoint Forwards Busy to Voicemail with History Info
This example illustrates how History Info works in conjunction with
service retargeting. The scenario is the same as Section 6.1.
F1: INVITE 192.0.2.1 -> proxy.example.com
INVITE sip:+15555551002@example.com;user=phone SIP/2.0
Via: SIP/2.0/TCP 192.0.2.1:5060;branch=z9hG4bK-74bf9
From: Alice <sip:+15551001@example.com;user=phone>;tag=9fxced76sl
To: sip:+15555551002@example.com;user=phone
Call-ID: c3x842276298220188511
CSeq: 1 INVITE
Max-Forwards: 70
Contact: <sip:alice@192.0.2.1>
History-Info: <sip:+15555551002@example.com;user=phone >;index=1
Content-Type: application/sdp
Content-Length: *Body length goes here*
* SDP goes here*
F2: INVITE proxy.example.com -> 192.0.2.2
INVITE sip:line1@192.0.2.2 SIP/2.0
Via: SIP/2.0/TCP 192.0.2.4:5060;branch=z9hG4bK-ik80k7g-1
Via: SIP/2.0/TCP 192.0.2.1:5060;branch=z9hG4bK-74bf9
From: Alice <sip:+15551001@example.com;user=phone>;tag=9fxced76sl
To: sip:+15555551002@example.com;user=phone
Call-ID: c3x842276298220188511
CSeq: 1 INVITE
Max-Forwards: 70
Contact: <sip:alice@192.0.2.1>
History-Info: <sip:+15555551002@example.com;user=phone >;index=1,
<sip:line1@192.0.2.4>;index=1.1
Content-Type: application/sdp
Content-Length: *Body length goes here*
* SDP goes here*
Jennings, et al. Informational [Page 13]
RFC 4458 SIP Voicemail URI April 2006
F7: INVITE proxy.example.com -> um.example.com
INVITE sip: voicemail@example.com;\
target=sip:+15555551002%40example.com;user=phone;\
cause=486 SIP/2.0
Via: SIP/2.0/TCP 192.0.2.4:5060;branch=z9hG4bK-ik80k7g-2
Via: SIP/2.0/TCP 192.0.2.1:5060;branch=z9hG4bK-74bf9
From: Alice <sip:+15551001@example.com;user=phone>;tag=9fxced76sl
To: sip:+15555551002@example.com;user=phone
Call-ID: c3x842276298220188511
CSeq: 1 INVITE
Max-Forwards: 70
Contact: <sip:alice@192.0.2.1>
History-Info: <sip:+15555551002@example.com;user=phone >;index=1,
<sip:line1@192.0.2.4?Reason=SIP%3Bcause%3D302;\
text="Moved Temporarily">;index=1.1
<sip: voicemail@example.com;\
target=sip:+15555551002%40example.com;user=phone;\
cause=486>;index=2
Contact: <sip:alice@192.0.2.1>
Content-Type: application/sdp
Content-Length: *Body length goes here*
* SDP goes here*
6.5. Zero Configuration UM System
In this example, the UM system has no configuration information
specific to any user. The proxy is configured to pass a URI that
provides the prompt to play and an email address in the user portion
of the URI to which the recorded message is to be sent.
The call flow is the same as in Section 6.1, except that the URI in
F7 changes to specify the user part as Bob's email address, and the
Netann [7] URI play parameter specifies where the greeting to play
can be fetched from.
Jennings, et al. Informational [Page 14]
RFC 4458 SIP Voicemail URI April 2006
F7: INVITE proxy.example.com -> voicemail.example.com
INVITE sip:voicemail@example.com;target=mailto:bob%40example.com;\
cause=486;play=http://www.example.com/bob/busy.wav SIP/2.0
Via: SIP/2.0/TCP 192.0.2.4:5060;branch=z9hG4bK-ik80k7g-2
Via: SIP/2.0/TCP 192.0.2.1:5060;branch=z9hG4bK-74bf9
From: Alice <sip:+15555551001@example.com;user=phone>;tag=9fxced76sl
To: sip:+15555551002@example.com;user=phone
Call-ID: c3x842276298220188511
CSeq: 1 INVITE
Max-Forwards: 70
Contact: <sip:alice@192.0.2.1>
Content-Type: application/sdp
Content-Length: *Body length goes here*
* SDP goes here*
In addition, if the proxy wished to indicate a Voice XML (VXML)
script that the UM should execute, it could add a parameter to the
URI in the above message that looked like:
voicexml=http://www.example.com/bob/busy.vxml
6.6. Call Coverage
In a Call Coverage example, a user on the PSTN calls an 800 number.
The gateway sends this to the proxy, which recognizes that the
helpdesk is the target. Alice and Bob are staffing the help desk and
are tried sequentially, but neither answers, so the call is forwarded
to the helpdesk's voicemail.
The details of this flow are trivial and not shown. The key item in
this example is that the INVITE to Alice and Bob looks as follows:
INVITE sip:voicemail@example.com;target=helpdesk%40example.com;\
cause=302 SIP/2.0
7. IANA Considerations
This specification adds two new values to the IANA registration in
the "SIP/SIPS URI Parameters" registry as defined in [3].
Parameter Name Predefined Values Reference
____________________________________________
target No [RFC4458]
cause Yes [RFC4458]
Jennings, et al. Informational [Page 15]
RFC 4458 SIP Voicemail URI April 2006
8. Security Considerations
This document discusses transactions involving at least three
parties, which increases the complexity of the privacy issues.
The new URI parameters defined in this document are generally sent
from a Proxy or call control system to a Unified Messaging (UM)
system or to a gateway to the PSTN and then to a voicemail system.
These new parameters tell the UM what service the proxy wishes to
have performed. Just as any message sent from the proxy to the UM
needs to be integrity protected, these messages need to be integrity
protected to stop attackers from, for example, causing a voicemail
meant for a company's CEO to go to an attacker's mailbox. RFC 3261
provides a TLS mechanism suitable for performing this integrity
protection.
The signaling from the Proxy to the UM or gateway will reveal who is
calling whom and possibly some information about a user's presence
based on whether the call was answered or sent to voicemail. This
information can be protected by encrypting the SIP traffic between
the Proxy and UM or gateway. Again, RFC 3261 contains mechanisms for
accomplishing this using TLS.
Implementations should implement and use TLS.
8.1. Integrity Protection of Forwarding in SIP
The forwarding of a call in SIP brings up a very strange trust issue.
Consider the normal case -- A calls B and the call gets forwarded to
C by a network element in B's domain, and then C answers the call. A
has called B but ended up talking to C. This scenario may be hard to
separate from a man-in-the-middle attack.
There are two possible solutions. One is that B sends back
information to A saying don't call me, call C, and signs it as B.
The problem is that this solution involves revealing that B has
forwarded to C, which B often may not want to do. For example, B may
be a work phone that has been forwarded to a mobile or home phone.
The user does not want to reveal their mobile or home phone number
but, even more importantly, does not want to reveal that they are not
in the office.
The other possible solution is that A needs to trust B only to
forward to a trusted identity. This requires a hop-by-hop transitive
trust such that each hop will only send to a trusted next hop and
each hop will only do things that the user at that hop desired. This
Jennings, et al. Informational [Page 16]
RFC 4458 SIP Voicemail URI April 2006
solution is enforced in SIP using the SIPS URI and TLS-based
hop-by-hop security. It protects from an off-axis attack, but if one
of the hops is not trustworthy, the call may be diverted to an
attacker.
Any redirection of a call to an attacker's mailbox is serious. It is
trivial for an attacker to make its mailbox seem very much like the
real mailbox and forward the messages to the real mailbox so that the
fact that the messages have been intercepted or even tampered with
escapes detection. Approaches such as the SIPS URL and the
History-Info[6] can help protect against these attacks.
8.2. Privacy Related Issues on the Second Call Leg
In the case where A calls B and gets redirected to C, occasionally
people suggest that there is a requirement for the call leg from B to
C to be anonymous. The SIP case is not the PSTN, and there is no
call leg from B to C; instead, there is a VoIP session between A and
C. If A has put a To header field value containing B in the initial
invite message, unless something special is done about it, C would
see that To header field value. If the person who answers phone C
says "I think you dialed the wrong number; who were you trying to
reach?", A will probably specify B.
If A does not want C to see that the call was to B, A needs a special
relationship with the forwarding Proxy to induce it not to reveal
that information. The call should go through an anonymization
service that provides session or user level privacy (as described in
RFC 3323 [2]) service before going to C. It is not hard to figure
out how to meet this requirement, but it is unclear why anyone would
want this service.
The scenario in which B wants to make sure that C does not see that
the call was to B is easier to deal with but a bit weird. The usual
argument is that Bill wants to forward his phone to Monica but does
not want Monica to find out his phone number. It is hard to imagine
that Monica would want to accept all Bill's calls without knowing how
to call Bill to complain. The only person Monica will be able to
complain to is Hillary, when she tries to call Bill. Several popular
web portals will send SMS alert messages about things like stock
prices and weather to mobile phone users today. Some of these
contain no information about the account on the web portal that
initiated them, making it nearly impossible for the mobile phone
owner to stop them. This anonymous message forwarding has turned out
to be a really bad idea even where no malice is present. Clearly
some people are fairly dubious about the need for this, but never
mind: let's look at how it is solved.
Jennings, et al. Informational [Page 17]
RFC 4458 SIP Voicemail URI April 2006
In the general case, the proxy needs to route the call through an
anonymization service and everything will be cleaned up. Any
anonymization service that performs the "Privacy: Header" Service in
RFC 3323 [2] must remove the cause and target URI parameters from the
URI. Privacy of the parameters, when they form part of a URI within
the History-Info header, is covered in History-Info [6].
This specification does not discuss the security considerations of
mapping to a PSTN Gateway. Security implications of mapping to ISUP,
for example, are discussed in RFC 3398 [5].
9. Acknowledgements
Many thanks to Mary Barnes, Steve Levy, Dean Willis, Allison Mankin,
Martin Dolly, Paul Kyzivat, Erick Sasaki, Lyndsay Campbell, Keith
Drage, Miguel Garcia, Sebastien Garcin, Roland Jesske, Takumi Ohba,
and Rohan Mahy.
10. References
10.1. Normative References
[1] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A.,
Peterson, J., Sparks, R., Handley, M., and E. Schooler, "SIP:
Session Initiation Protocol", RFC 3261, June 2002.
[2] Peterson, J., "A Privacy Mechanism for the Session Initiation
Protocol (SIP)", RFC 3323, November 2002.
[3] Camarillo, G., "The Internet Assigned Number Authority (IANA)
Uniform Resource Identifier (URI) Parameter Registry for the
Session Initiation Protocol (SIP)", BCP 99, RFC 3969,
December 2004.
[4] Crocker, D. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", RFC 4234, October 2005.
10.2. Informative References
[5] Camarillo, G., Roach, A., Peterson, J., and L. Ong, "Integrated
Services Digital Network (ISDN) User Part (ISUP) to Session
Initiation Protocol (SIP) Mapping", RFC 3398, December 2002.
[6] Barnes, M., "An Extension to the Session Initiation Protocol
(SIP) for Request History Information", RFC 4244,
November 2005.
Jennings, et al. Informational [Page 18]
RFC 4458 SIP Voicemail URI April 2006
[7] Burger, E., Van Dyke, J., and A. Spitzer, "Basic Network Media
Services with SIP", RFC 4240, December 2005.
[8] "Stage 3 description for call offering supplementary services
using signalling system No. 7: Call diversion services", ITU-T
Recommendation Q.732.2-5, December 1999.
[9] "Usage of cause and location in the Digital Subscriber
Signalling System No. 1 and the Signalling System No. 7 ISDN
User Part", ITU-T Recommendation Q.850, May 1998.
[10] "ISDN user-network interface layer 3 specification for basic
call control", ITU-T Recommendation Q.931, May 1998.
[11] "Information technology - Telecommunications and information
exchange between systems - Private Integrated Services Network
- Circuit mode bearer services - Inter-exchange signalling
procedures and protocol", ISO/IEC 11572, March 2000.
Jennings, et al. Informational [Page 19]
RFC 4458 SIP Voicemail URI April 2006
Authors' Addresses
Cullen Jennings
Cisco Systems
170 West Tasman Drive
Mailstop SJC-21/2
San Jose, CA 95134
USA
Phone: +1 408 421-9990
EMail: fluffy@cisco.com
Francois Audet
Nortel Networks
4655 Great America Parkway
Santa Clara, CA 95054
US
Phone: +1 408 495 3756
EMail: audet@nortel.com
John Elwell
Siemens plc
Technology Drive
Beeston, Nottingham NG9 1LA
UK
EMail: john.elwell@siemens.com
Jennings, et al. Informational [Page 20]
RFC 4458 SIP Voicemail URI April 2006
Full Copyright Statement
Copyright (C) The Internet Society (2006).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is provided by the IETF
Administrative Support Activity (IASA).
Jennings, et al. Informational [Page 21]