💾 Archived View for gemini.spam.works › mirrors › textfiles › computers › ASTRESEARCH › 0791.tb captured on 2020-10-31 at 21:45:47.
-=-=-=-=-=-=-
=============================================================================
AST RESEARCH, INC. TECHNICAL BULLETIN #0791 11-20-92
=============================================================================
ADVANTAGE! PLUS MINI-TOWER AND I/O PORT CONFIGURATION
PROBLEMS: Customers may experience one or more of the following problems
with the Advantage! Plus Mini Tower and/or I/O port
configuration.
- No label on back panel for Com Port 1 or Com Port 2.
- No label on back panel for Parallel Port.
- A reversed internal serial cabling which would cause a
problem while attempting to connect the mouse to Com 1.
AFFECTED
SYSTEMS: Advantage! Plus Mini-Tower.
SOLUTION: Make sure that the mouse is connected to the bottom connector,
which is Com 1.
Note: Not all systems will exhibit this problem. This is more of an FYI,
since all systems have been corrected. Com Port 2 is disabled since
it is in use by the Data/Fax Modem.