💾 Archived View for gemini.spam.works › mirrors › textfiles › apple › DOCUMENTATION › phantom.access… captured on 2020-10-31 at 21:04:30.
-=-=-=-=-=-=-
_________________________________
| |
| ^%[> Phantom Access 5.7K <]%^ |
| |
| (C)reated By: Lord Digital |
|_________________________________|
=:=:=:=:=:=:=:=:=
[ Introduction: ]
=:=:=:=:=:=:=:=:=
*+* *+*
The entire Phantom Access series was written as a set of programmable modules,
that are easily intergratable with each other, and can accomplish various tasks
without the need of supervision.
For example:
1: Hack #: NPA-ANC-XXXX until you have 4 valid codes.
2: Using the 4 valid codes from step 1: Scan the exchange of: NPA-ANC-XXXX
In this exchange note all systems that connect at 1200bps and identify
themselves with /login/ usually indicating a Unix. If task is complete
& it is no later then xx;xx;xx;xx go on to step 4.
3: End, write all information to a file, and shut down.
4: Login to TRW using password x & dialup y, if password x no longer works
then use password x1, x2, etc, until you hit one that is still valid.
once connected pull reports on the people in file z. or if no password
still valid; look at time, if it is no later then xx;xx;xx;xx go onto
step 6.
5: End, write all information to a file, and shut down.
6: ..........etc
In short; a series of programs with the same style of syntax, that write and
retrieve information from a set of files whose format is compatible with all of
the other programs that work with them. => a primitive Database with 'infinite'
capabilities. Using simple commands you could create a custom system for what-
ever task(s) you wanted.
Phantom Access 5.7X (X = The hardware specific version you are using.) is
the code hacker of the series. It is fully 'programmable' in the sense that you
can customize existing (example) modules to hack whatever you want them to. Or
just as easily create new modules for complex system's.
For example:
1: Call MCI
2: Enter valid code for MCI
3: Call PBX NPA-ANC-XXXX
4: Hack code for PBX
Or:
1: Call MCI
2: Enter valid code for MCI
3: Call Number NPA-ANC-XXXX
4: Trunk it
5: K(p<MF).etc.S(t<TT)
6: etc...
Obviously the longer the set of 'blocks' the more time it will take to go
through one 'block-set' and repeat the sequence with the code being incremented
or whatever it is that you're doing.
One thing to be VERY carefull about is the quality of AUDIO on the chain
of events. If you're dialing through 6 extenders to a hack a code for a PBX in
heathentown Australia, not only will it take a hell of a long time to complete
one block-set, but by the time you connect with heathentown's PBX, the Audio is
very probably so bad that the Apple-Cat isn't going to detect an error message,
or a dialtone for that matter...
--->>> Any question's, comment's, or suggestion's, are welcome. If you do not
have any other way of contacting me at the present time. I can be reach-
on the: Cat's Cavern, @ 805/492-3150. You are able to login without the
use of a secondary pw.
=^=^=^=^=^=^=^=^=^=^=^=^=^=^=^=^=^=
[ Hacker Overview / Documentation ]
=^=^=^=^=^=^=^=^=^=^=^=^=^=^=^=^=^=
(Introduction)
--------------
Upon running, you will see something to the effect of:
[Slot][X][Drive][X][Volume][XXX]
X(XX) = whatever s,d,v you want all further disk access directed toward. Simply
hitting C/R at every input selects the default setting of S6,D1,V000...
(PLEASE NOTE: You will have to patch DOS to make it aware of any hard-
ware device you want to access. <If this is not automatic.> Ie: Slot=7
Volume 58, etc. If you booted into Slot 6, into normal DOS, then as
DOS is concerned your Hard Disk doesn't exist and it will just hang. )
After a preliminary memory search (to see what is or isn't allready there), it
will come up at the central menu. Selecting a '1' from here will jump to the
begging of the 'start-hacker' routine, a '2' run's the utility package, & a '3'
quits to basic.
Assuming you chose 1 you will now be prompted for a 'sub-module' to load. This
is the text file that contains the instructions of what phantom access will do
during this hack. Hitting C/R get's you a catlog of the current s,d,v.
After typing in the sub-module name, assuming the module is found on the s,d,v
selected, you will be asked whether you want this to be a random or sequential
scan at the C[ode] variable.
Start Scan at code: (obvious). If the length of the code you select is longer
or shorter then the Code Length specified for this sub-module, it will again
prompt you for the code to start at...
Re-Test valid codes: If you select yes it will test each codes that comes up as
good 1 more time to make sure that it really is valid.
Date: Enter the appropriate date, in the format shown, this is for the status
report at the end of a scan.
Some question to the effect of: 'use occ dialthrough', answering No, will jump
to the 'is everything correct' input, immediately prior to starting the scan.
If you answer Yes, you will be prompted with the following:
___
Explanation: If you wish to 'dial-through' or chain codes/systems, you can very
easily include this in the 'blockset'. OCC dialthrough is different, it assumes
1
it will be using MCI to dialthrough, so step 1 will be replaced by this. In
other words, there is only 1 actual pick-up, every other time it cycles through
to the pick-up/hang-up routine, it will 'pound out' instead. This was made for
purpose of speeding up 'chaining', having only 1 outgoing call in the entire
scan, instead of 3,000+ (or however long you let it run). The 'install max fail
limit' question, asks: do you want to install a limit on the number of times
that 'pound out' can fail. (After it 'pounds out' <#> the hacker searches for a
dialtone, indicating that it can go on & redial, if none is found, then it will
cycle through to a physical hang-up, followed by a redialing to the OCC, and re
start from where it left off.) Answering yes, allows you to impose a limit on
the number of times this audio test can fail, and provided that it fails more
times then you chose to allow, the hacker will shut itself down.
---
OCC dialup: (dialup to Occ node)
Valid code for OCC: (valid code)
Install maximum fail limit? (answering yes will go to the next question, a no
will jump to 'is everything correct.)
Maximimum # of times Audio test can fail: (maximum # of times the OCC can fail
to 'pound out'.)
___
Is everything correct? (yes- starts hacker, no- goes back to 'rnd / seq' input)
Hacker Status: Everything is more or less self-explanatory. Esc quits and
asks you if you desire a status report on the scan that was
just done. And brings you back to main menu.
---
[Footnote#1]: MCI = ANY system that will return the initial Tone back with a #,
key. As far as I know AllNet, and several other OCC's do this as
well.
Lord Digital