💾 Archived View for gemini.spam.works › mirrors › textfiles › groups › 9X › rolmpm.hlp captured on 2020-10-31 at 23:58:02.
-=-=-=-=-=-=-
STATION ID - 7047/3.12
9x Datakit Network
FOR OFFICIAL USE ONLY
This is a 9x system, restricted to authorized persons and for
official 9x business only. Anyone using this system, network or data
is subject to being monitored at any time for system administration and
for identifying unauthorized users or system misuse. Anyone using this
system expressly consents to such monitoring and is advised that any
evidence of criminal activity revealed through such monitoring may be
provided to law enforcement for prosecution.
Some information on ROLM PhoneMail systems
Written in 1996 by Substance
This will try to explain to you how to use the PBX features, how to setup
and takeover your own boxes, and also give a basic overview of the system.
I included a log of a PM and a brief description of each command.
The main menu of a PM will have these options on it, i will attempt to give
a brief summary of what each command does. Some of the commands i left
blank either A) I dont know what it duz or B) You can figure it out
yourself.
? ActivatePM ? Turns on PhoneMail, if it was Deactivated
? AssignClasses ?
? BackupNames ?
? BackupSystem ? Backs up the PM system to floppy
? CallProcessing ?
? ClassOfService ?
? DeactivatePM ? Turns off PhoneMail, after this, PM will be BUSY
? DList ?
? Export ?
? FFormat ? Formats a floppy disk
? LogOff ? Logoff the PM system
? MonitorLogon ? Monitors Mailbox Login Attempts
? NodeParameters ? Configure PM Node Parameters, find # of PM VMB
? OCConfigAndTest ?
? OCMessageLog ?
? Profile ?
? Reports ? Gives Daily reports on PM
? RestrictionTbls ? Restrictions
? Status ? Shows Status of PM, # of users, if active, general
? SysParameters ? Shows System Parameters
? SysStatistics ? Shows System Statistics
Loggin into the System:
CONNECT 1200 (not all PM's are 1200, but most)
(It should answer and say)
PM Login>
Illegal Input. (if you dont enter a valid usrname)
Default Accounts (known) (<cr> = enter)
-------------------------
LOGIN: PW:
SYS <CR>, SYS, TECH, POLL etc
TECH <CR>, SYS, TECH, POLL etc
POLL <same as above>
SYSADMIN <CR> or SYSADMIN
There may be more defaults, im not sure. Passwords are NOT case sensative.
(Once you enter the system you will know when you see this, it will vary
depending on what version of PhoneMail you are on.)
ROLM PhoneMail 9252 9254 Microcode Version 5.3
Copyright (C) ROLM Systems 1992
All Rights Reserved.
???
PhoneMail is active with 4 Channels
[The basic main SA menu looks like this] (SA = System Administrative) ]
[It will vary depending on what accound you logged in as ]
Thu Jul 13, 1995 10:32 PM
Specify a function -
ActivatePM AssignClasses BackupNames
BackupSystem CallProcessing ClassOfService
DeactivatePM DList Export
FFormat LogOff MonitorLogon
NodeParameters OCConfigAndTest OCMessageLog
Profile Reports RestrictionTbls
Status SysParameters SysStatistics
------------------------------------------------------------------------------
Function: SysStatistics (System Statistics)
Thu Jul 13, 1995 10:33 PM
Action: ?
Specify an action -
Clear List
(*I would not advise clearing the buffer it might notify the admin*)
Action: List (This list is alot longer then i printed, sometimes)
Disk Full Count 0
Disk Full Hours 0
Disk 90% Full Count 0
Disk 90% Full Hours 0
etc, etc, etc
Im not exactly positive what all of the System Statistics are, but you can
guess on some of them.
Function: SysParameters
Thu Jul 13, 1995 10:34 PM
Action: ?
Specify an action -
List Modify
Action: List
Passwords Required ? TRUE (Ask for passwords?)
Prompt Repetitions 2 (How many times should PM repeat prompt)
Max PhoneMail ML 300
StopPrompt TimeOut 3
Re-Prompt TimeOut 5
PhoneMail Rev Number 0
Conn Time Unit Price 1
Min Conn Time Bill 1
Outcall Unit Price 100
Min Outcall Bill 100
ANR Frequency 10
ANR Retries 2
Msg Sent Unit Price 1
Min Msg Sent Bill 1
Msg Len Unit Price 1
Min Msg Length Bill 1
Avg Retn Unit Price 1
Min Avg Retn Bill 1
Avg Len Unit Price 1
Min Avg Length Bill 1
SA Console Password ########## (System Admin's Console Password!)
1st Level Field PW ########## (unfortunatly they are shadowed)
2nd Level Field PW ##########
Xfer To Extension ? TRUE
Xfer To Extn Prefix
Return To Operator ? TRUE
Name Entry Allowed ? TRUE
Extn Entry Allowed ? TRUE
Enable Outcalling ? FALSE
Play Recorded Names? TRUE
System Wide Vol Ctrl FALSE
Min SA Password Len 8
Last SA Pswd Change Thu Dec 31, 1992 11:35 AM (hahah)
Extern Access Prefix 9
24Hour Clock Format? FALSE
Alt Date Format? FALSE
Area Code 518
Silence Tmout (secs) 10
Disk Full Thresh (%) 90
Return to home state TRUE
Check Sub Password TRUE
Transfer Restriction FALSE
Notice the System Administrators password is shadowed, unfortunatly.
To hack Admins box you must change his password, and hope he doesnt notice :)
Or you can just setup your own box on the system and give yourself admin
access. So it is just best to leave the admins box alone, it will lessen
your chances of being noticed and also make your boxes last *ALOT* longer.
Note on Outcalling (mentioned above)
Outcalling is *NoT* what you think, it is not a way to make free calls, IF
outcalling is enabled (default is not enabled), it is simply a way to have
PM call YOU at a specific location at a specific time and give you your
messages.
------------------------------------------------------------------------------
Function: Status
Thu Jul 13, 1995 10:35 PM
Action: List
Percent of Disk Used 40
Number Busy Channels 0 (incoming) 0 (outcalling) 0 (network)
Number Down Channels 0
Number Disks Mounted 1
Number of Users 50
PhoneMail Active? TRUE
Prompt Language English
------------------------------------------------------------------------------
Function: NodeParameters
Thu Jul 13, 1995 10:35 PM
Action: List
Forwarded Ext Num 6195 - Extension and last 4 digits of VMB
Direct Ext Num 6197
Guest Ext Num 6196
Guest Acc if Unknown FALSE
General Mailbox ? FALSE
General Mailbox Num
Sub Redirect Mode 0
Internode Xfer Num
Host Link Node UNASSIGNED
Host System ID
Host UserId
Host Link ID
Max Number Of DLists 3000
SA Access Extension
SA Access Password ########## (shadowed)
PDL Reserved Extn 1
Pager Display Number xxx6195
Outcall Max Channels 1
PhoneMail Operator 6000
Voice Msg Priority ? TRUE
Min Free Chan - Prty 0
CP Fixed Extn Length 4
CP Re-Prompt TimeOut 5
CP Prompt Repetition 2
CP PhoneMail Oper. 6000
ANI Enabled ? FALSE
DLCheck Time Begun Wed Jun 28, 1995 9:15 AM
DLCheck Finish Time Wed Jun 28, 1995 9:15 AM
DLCheck Throttle Val 1
Volume level of node 3
If you want the dialup for the PhoneMail system, look under this option, to
find the #, look at 'Direct Ext Num: 6197' Remember what you dialed for
this Rolm control computer? Well, take that prefix and add on the 4 digits
after the Direct Ext Num, so it could be 445-6197, etc. To be xfered to the
operator you can see it is extension 6000, i wouldnt advise taking over this
box, for obvious reasons. As you can see PM's have ANi, dont enable this
unless your a total lamer. (ANi = Automatic # identification, in other
words, a trace)
------------------------------------------------------------------------------
Function: RestrictionTbls
Thu Jul 13, 1995 10:38 PM
Dial Restriction Table Edit
1. Add Table
2. Modify Table
3. Delete Table
4. List Table
5. Test Table
9. Exit
------------------------------------------------------------------------------
Function: AssignClasses
Thu Jul 13, 1995 10:39 PM
AssignClasses Version 1.0
<..>
<>
Total Users Total Users Total Users
This Site With New COS Without COS
48 0 0
------------------------------------------------------------------------------
Returning to the main System Administration menu
(this could take up to 5 minutes) ...
(dont ask me why it says it says it takes 5 minutes, it takes about 5 seconds
on this particular system)
------------------------------------------------------------------------------
Function: DList
Thu Jul 13, 1995 10:40 PM
Action: List
DList Number:
Cannot find this form.
-------------------------------------------------------------------------------
Function: OCConfigAndTest
Thu Jul 13, 1995 10:41 PM
Obtaining a channel...Channel 2
Fetching DTMF Prompts...OK
Closing channel...OK
Outcalling must be enabled from System Parameters before using this utility.
Returning to the main System Administration menu
(this could take up to 5 minutes) ...
-------------------------------------------------------------------------------
Function: SysParameter
Thu Jul 13, 1995 10:42 PM
Specify an action -
List Modify
Action: Modify
Passwords Required ?: (Previous = TRUE): (Use passwords on boxes?)
Prompt Repetitions : (Previous = 2): 4 (# of X's to repeat prompts)
Max PhoneMail ML : (Previous = 300): 350
StopPrompt TimeOut : (Previous = 3): 10
Re-Prompt TimeOut : (Previous = 5): 7
Conn Time Unit Price: (Previous = 1): (credits charged)
Min Conn Time Bill : (Previous = 1):
Outcall Unit Price : (Previous = 100): 0 (credits for using outcall)
Min Outcall Bill : (Previous = 100): 0 (Automatic # Recall)
ANR Frequency : (Previous = 10):
ANR Retries : (Previous = 2):
Msg Sent Unit Price : (Previous = 1):
Min Msg Sent Bill : (Previous = 1):
Msg Len Unit Price : (Previous = 1):
Min Msg Length Bill : (Previous = 1):
Avg Retn Unit Price : (Previous = 1):
Min Avg Retn Bill : (Previous = 1):
Avg Len Unit Price : (Previous = 1):
Min Avg Length Bill : (Previous = 1):
SA Console Password : (Previous = #): (System Admin Console PW)
1st Level Field PW : (Previous = #):
2nd Level Field PW : (Previous = ##########):
Xfer To Extension ? : (Previous = TRUE):
Xfer To Extn Prefix : (Previous = 0000):
Return To Operator ?: (Previous = TRUE):
Name Entry Allowed ?: (Previous = TRUE):
Extn Entry Allowed ?: (Previous = TRUE):
Enable Outcalling ? : (Previous = FALSE):
Play Recorded Names?: (Previous = TRUE):
System Wide Vol Ctrl: (Previous = FALSE):
Min SA Password Len : (Previous = 8):
Extern Access Prefix: (Previous = 9):
24Hour Clock Format?: (Previous = FALSE):
Alt Date Format? : (Previous = FALSE):
Area Code : (Previous = 518): (Area code PM is located in)
Silence Tmout (secs): (Previous = 10):
Disk Full Thresh (%): (Previous = 90):
Return to home state: (Previous = TRUE):
Check Sub Password : (Previous = TRUE):
Transfer Restriction: (Previous = FALSE):
As you can see SysParameter is the main configuration of the Rolm Phonemail
system. With this cmd you can Chage SA passwords, and basically configure the
entire Voice mail box system to their prefrence. PM is a very configurable
VMB system. Not many VMB systems let you change the amount of times it should
repeat prompts?
------------------------------------------------------------------------------
Function: MonitorLogon
Thu Jul 13, 1995 11:34 PM
Start monitoring user access attempts
Press <ENTER> to exit monitor mode...
Exit monitor mode.
This option when it is waiting informs the administrator of all logins and
login attempts on the system. It does not display passwords or any other
important info.
------------------------------------------------------------------------------
Function: Export
Thu Jul 13, 1995 11:36 PM
Export Data Utility Version 1.0
Querying Nodes.
Node #1 has responded.
Destination ?
Response required
Options are:
Diskette FileTransfer
Destination ? ;
Export exiting...done.
Please enter valid password:
Invalid password.
Unknown... (too bad i dont have a manual :(). I think it could possibly
be where it writes the log file to disk.. not sure tho.
------------------------------------------------------------------------------
Function: Logout
Thu Jul 13, 1995 10:45 PM
Logs the user off the PM system
------------------------------------------------------------------------------
Function: ClassOfService
Thu Jul 13, 1995 10:54 PM
Action: Add
Class Number : 1234
Invalid COS number
Class Number : 1
Class Name : (Default = ):
Max Number Msgs : (Default = 10):
Max Future Dlv Msgs : (Default = 5):
Max Msg Length : (Default = 200):
Max Number Greetings: (Default = 1):
Int/External Pair? : (Default = TRUE):
Max Greeting Length : (Default = 200):
Sub Recorded Names? : (Default = TRUE):
Min Sub Password Len: (Default = 0):
Max Access Attempts : (Default = 5):
Attempt Threshold : (Default = 0):
Send Broadcast? : (Default = FALSE):
Receive Broadcast? : (Default = TRUE):
Max Num PDLs Allowed: (Default = 5):
LDN Exped DL Enable : (Default = FALSE):
LDN Normal DL Enable: (Default = TRUE):
HostLink Subscriber?: (Default = FALSE):
Enable Outcalling? : (Default = FALSE): TRUE
Xfer from Outcall? : (Default = FALSE): TRUE
Restriction Table : (Default = 0):
Min Outcall Freq : (Default = 0):
RNA Retry Freq : (Default = 15):
Busy Retry Freq : (Default = 5):
Max Num RNA Retries : (Default = 3):
Max Num Busy Retries: (Default = 5):
Paging Lang String : (Default = 0):
Pager Terminal Num : (Default = ):
AMIS Intl Dlv Ena? : (Default = FALSE):
AMIS Delivery Ena? : (Default = TRUE):
If you wish to exit, type ";".
First Field of Form:
Class Name : (Previous = ): SMITH
Max Number Msgs : (Previous = 10): 25
Max Future Dlv Msgs : (Previous = 5):
Max Msg Length : (Previous = 200):
Max Number Greetings: (Previous = 1):
Int/External Pair? : (Previous = TRUE):
Max Greeting Length : (Previous = 200): ;
Done.
Class Number :
Unexpected value
Class Number :
Unexpected value
Class Number : 0
COS already exists
Please retry.
Class Number : 3
Class Name : (Previous = ): ;
Done.
Class Number :
Unexpected value
Class Name : (Previous = ):
Max Number Msgs : (Previous = 10):
Max Future Dlv Msgs : (Previous = 5):
Max Msg Length : (Previous = 200):
Max Number Greetings: (Previous = 1):
Int/External Pair? : (Previous = TRUE):
Max Greeting Length : (Previous = 200):
Sub Recorded Names? : (Previous = TRUE):
Min Sub Password Len: (Previous = 0):
Max Access Attempts : (Previous = 5):
Attempt Threshold : (Previous = 0):
Send Broadcast? : (Previous = FALSE):
Receive Broadcast? : (Previous = TRUE):
Max Num PDLs Allowed: (Previous = 5):
LDN Exped DL Enable : (Previous = FALSE):
LDN Normal DL Enable: (Previous = TRUE):
HostLink Subscriber?: (Previous = FALSE):
Enable Outcalling? : (Previous = FALSE):
Xfer from Outcall? : (Previous = FALSE):
Restriction Table : (Previous = 0):
Min Outcall Freq : (Previous = 0):
RNA Retry Freq : (Previous = 15):
Busy Retry Freq : (Previous = 5):
Max Num RNA Retries : (Previous = 3):
Max Num Busy Retries: (Previous = 5):
Paging Lang String : (Previous = 0):
Pager Terminal Num : (Previous = ):
AMIS Intl Dlv Ena? : (Previous = FALSE):
AMIS Delivery Ena? : (Previous = TRUE):
If you wish to exit, type ";".
First Field of Form:
Class Name : (Previous = ):
Max Number Msgs : (Previous = 10):
Max Future Dlv Msgs : (Previous = 5): ;
Done.
---------------------------------------------------------------------------
Function: BackupSystem
Thu Jul 13, 1995 11:00 PM
Beginning backup...
BackupSystem Version 1.4
Your current system configuration contains:
1 Node 1 Disk
The system files will be backed up to diskettes.
QUIT This backup process may take 1 minutes
and will require approximately 1 diskette.
The system administrator must be present to facilitate this process.
Begin backup to diskettes (y/n)? n
Backs up the system to disk, not recomended.
------------------------------------------------------------------------------
Function: CallProcessing
Thu Jul 13, 1995 11:04 PM
======== Call Processing Setup Menu ========
A - Add Call Processing Mailbox Profile
L - List Call Processing Mailbox Profile
M - Modify Call Processing Mailbox Profile
D - Delete Call Processing Mailbox Profile
S - Show Call Processing Mailbox Profiles
E - Expand Call Processing Paths
C - Check Call Processing Consistency
R - Reports for Call Processing
F - Finished (return to SA mode)
Action: S
Enter path to show, <CR> for all paths:
Mailbox Mailbox Mailbox Greeting Messages
Path Name Name Type Extn Recorded Waiting
--------- ------- ------- ------- -------- --------
Collections Collections Menu Entry 7650 Yes ----
HOLIDAY HOLIDAY Listen Only Entry 5011 Yes ----
Action:
======== Call Processing Setup Menu ========
A - Add Call Processing Mailbox Profile
L - List Call Processing Mailbox Profile
M - Modify Call Processing Mailbox Profile
D - Delete Call Processing Mailbox Profile
S - Show Call Processing Mailbox Profiles
E - Expand Call Processing Paths
C - Check Call Processing Consistency
R - Reports for Call Processing
F - Finished (return to SA mode)
Action: M
Mailbox extn []: 7650
Mailbox extn [7650]: 7650
Path Name [Collections]: Collections
Mailbox Name [Collections]: Collections
Call processing mailbox type (? for help) [Menu]: ?
Please enter:
(LO) Listen Only
(LR) Lis/Resp
(M) Menu
Call processing mailbox type (? for help) [Menu]: Menu
Enable password [False]: False
Entry point [True]: True
Number of times to play greeting [1]: 2
Greeting replay time (secs) [5]: 5
Time out transfer type (? for help) [Phone Extn]: ?
Please enter:
(C) CallProcessing Extn
(P) Phone Extn
(S) Subscriber Profile
(NE) Name or Extn transfer
(NO) Name only transfer
(EO) Extn only transfer
(D) Direct Access
(G) Guest Access
(H) Hangup
Time out transfer type (? for help) [Phone Extn]: Phone Extn
Transfer extn [5135]: 5135
Min Sub Password Len [6]: 3
Max Access Attempts [3]: 3
Attempt Threshold [3]: 3
Direct access password (numeric) [######]: ######
Failed access attempt [1]: 1
Key 0 transfer type (? for help) [Unused]: ?
Please enter:
(C) CallProcessing Extn
(P) Phone Extn
(S) Subscriber Profile
(NE) Name or Extn transfer
(NO) Name only transfer
(EO) Extn only transfer
(D) Direct Access
(G) Guest Access
(U) Unused
Key 0 transfer type (? for help) [Unused]: Unused
Key 1 transfer type (? for help) [Extn only Transfer]: Extn only Transfer
Confirm transfer? [True]: True
Play Intro Prompt? [True]: True
Key 2 transfer type (? for help) [Unused]: Unused
Key 3 transfer type (? for help) [Unused]: Unused
Key 4 transfer type (? for help) [Unused]: Unused
Key 5 transfer type (? for help) [Unused]: Unused
Key 6 transfer type (? for help) [Unused]: Unused
Key 7 transfer type (? for help) [Unused]: Unused
Key 8 transfer type (? for help) [Unused]: Unused
Key 9 transfer type (? for help) [Unused]: Unused
Mailbox extn []:
Mailbox extn []: ?