💾 Archived View for gemini.spam.works › mirrors › textfiles › groups › PHAIT › soundb.box captured on 2020-11-01 at 00:34:09.
-=-=-=-=-=-=-
ShadowHawk 3/31/94
PHAiT CO-FOUNDER
Phreaks, Hackers, and Anarchists instigating Turmoil
proudly presents:
?THE SOUND BLASTER BOX?
Sound Blaster Box
This file will explain how to make a Sound Blaster Box. I once read
a file about a neon box, where you cut up your headphones so that you
can record your phone conversations easily. Well I thought that his method
SUCKED! So, I decided to explain to you, and the gut that wrote it, how to
make a better one. It's extremely better and has a lot more uses.
You will need:
1- Phone (preferably one that you don't care about messin' up)
1- Broken Walkman (with 2 Headphone Jacks!) or 2 headphone jacks seperate
(Sony Sport walkmen <the yellow ones> are the best)
1- microphone (one that will fit the headphone jacks)
1- speaker or headphones
1- screwdriver
1- soldering iron (optional)
2- Extra wire
How you WILL make it:
1. Unplug the phone from the wall. If you already have the headphone jacks,
goto step 3.
2. Take your old walkman and and open it up, relativly gently. Then find your
Headphone jacks (where you plug them in, DUH!) Next you will have to
remove them. If they are on a ciruit board it is recomended to use a
soldering iron to melt the solder and then remove it with out breaking it.
If they are connected with wire, then cut the wire as far down as possible,
leaving as much wire hanging off the jacks as you can.
3. Open your phone and find the microphone. Cut the mircophone off, leaving
equal amounts of wire on both the circuit board and the mike. Then take
your extra wire and connect one wire to each wire coming from the circuit
board of the phone, where the mike WAS connected (this will essentailly
extend the wires, so that they reach the top of the phone)
4. Take the extended wires and connect ond headphone jack to it.You may want
to solder this connection. You now have a microphone plug. This is very
cool for connecting your sound board to the phone. (Explained Later)
5. Next cut the speaker off the phone. Leaving equal amounts of wire on each
end. Then connect the second headphone jack to these wires. You now have a
speaker jack.
6. Drill two holes in the side of the phone and place each jack so that the
holes are accessibly from the outside (make sure that you can plug in the
headphones after placing the jacks, you may need to make the holes larger
if your headphones have a larger head.) Then superglue the jacks in place,
that way when you close the phone, they don't fall away from the drilled
holes.
7. Close the phone and plug it back in to the wall.
Usage.
As mentioned earlier, the headphone jacks are helpfull in pluging in your
sound board, but there are many other uses.
Uses for the Speaker Jack:
1. Tape phone conversations, by pluging the speaker jack of the phone into
the microphone jack of your stereo, or microcassete recorder.
2. Tape tones from your phone onto a microcassete recorder, so that you can
play them back on other phones. (like a portable dialer.)
3. You can plug it in to your speakers and make a speakerphone, or plug in
your headphones so that you don't need to hold the phone to your ear to
listen (You can make a headset with a microphone for complete hands-free
conversations.)
Uses for the Microphone Jack.
1. You can play your sound board files over the phone. (good for crank calls
and other such things.) Very useful if you have a large selection of .VOC's
or .WAV's! Simply unplug your speakers and connect the speaker jack of the
sound board to the microphone jack of the phone.
2. You can play your walkman over the phone. (Crank Calls)
3. You can play anything with the capability to plug headphones into it over
the phone! (TV's, radios, guitar amps, CD players)
4. You can build a headset phone as mentioned above, by taking your handy
pair of headphones, and taping a microphone to the front with a piece of
a broken hanger, or something.
5. You can secretly listen in on you parents conversations, because there is
no microphone, ther is no sound when you pick up the phone!
6. You can blast the person on the other side of the phone by running your
mike through an amp and then pluging it in to the microphone jack. (Very
Cool for Crank Calls!, frieks the person out!)
??????????????????????????????????????????????????????????????????????????????
All info provided for information purposes only, however, there is nothing
illegal about pluging your sound blaster or stereo into your phone!
??????????????????????????????????????????????????????????????????????????????
Writen by: ?ShadowHawk? of PHAiTE
Date: 3-31-94
If you have any questions or comments leave me E-mail at:
Arcadaes BBS 1-215-295-0178
UnderGround Outpost 1-215-493-7703
The Asylum ][ 1-215-493-0934