💾 Archived View for gemini.spam.works › mirrors › textfiles › uploads › lbvaporizer.txt captured on 2020-10-31 at 01:21:50.
-=-=-=-=-=-=-
<------------------------------------- The Light Bulb Vaporizer
------------------------------------>
[By: egregius 2004]
DOCUMENT DISCLAIMER:
The information
contained in this document is intended for educational purposes only. The
author has no responsibility in any form for use of this document in any
way. Use this document at your own personal risk only. Use of this document
violates your local, state, and federal laws in the United States of
America. Readers located in counties besides America should investigate your
nations laws before using any information contained in this document. Use at
personal risk of violating the law.
<---------------------------------------------------------------------------------------------------------->
ABOUT VAPORIZORS AND VAPORIZATION:
A light bulb vaporizer is a light bulb with the end
broken off, cleaned out and a straw sized tube. The user puts the substance
in the bulb applies a flame to the top of the glass end of the bulb, and
inhales the vapors let off by the heated substance through the end you screw
in, through the tube. Most drugs including marijuana, methamphetamine,
free-based cocaine, opium, heroin, DMT, foxy, MDMA, and most everything else
can be vaporized using this method. Vaporizing produces a rush because the
substance hits the brain faster then injection. (Less then a second) That?s
why some people may risk becoming addicted with some substances. Some
people?s minds just are more likely to addict when the drug is inhaled. But
in most cases vaporization is much better then smoking it because you don?t
burn the substance. Plus you don?t get the byproducts of the combustion of
the substance.
In the case of marijuana you can get up to 95% of the THC
in the weed. When you vaporize weed the THC vaporizes at a lower temperature
then the other chemicals and contents of the plant. Therefore you can inhale
95% of the desired chemical, without any of the unwanted byproducts of
combustion nor the chemicals it contains. Cancer and AIDS patients often
choose this method because of the reduction of unwanted poisons and
chemicals. The main advantages to this are the amount of weed it takes to
get high. You can get stoned off an extremely lesser amount then smoking it.
The high is slightly different. More clear-headed, and calm. Also vaporizing
produces very little odor. You can smoke with people who disapprove in the
house. I suggest a little cover-up smell, and that will cover the small
amount of pot odor.
To vaporize hold the bulb about 5/6ths of an inch over a
flame, so the bulb doesn?t get black. Hold the flame right above the
substance in the bulb. When you see a white vapor filling the bulb take a
hit. You might leave the flame on the shit if you want to keep it vaporizing
for a bigger hit, but remember it will keep vaporizing after you take it off
the flame, until the temperature cools below it?s boiling point. You might
want to shake the substance around so it evenly cooks. Some chemicals you
might want to use ?rock? or chunks of it, so it stays together inside the
bulb, and is easier to cook. Meth is an example of this. With weed, break it
up so all the pieces are small, and around the same size. This will help it
cook faster, and evenly. You can usually tell when the substance is gone.
With pot the shit is brown, and the hits taste like burning weed. At this
point dump the spent pot, but you can smoke it and get further effects. With
other substances you can taste it, and tell by its appearance. Remember you
are also inhaling the contents of the substance other then the desired
chemical. This may pose a health hazard. Some people may have undesired
effects from vaporizing drugs. I?ve herd of vaporizing math causing
first-timers to freak out, and have heart problems. So keep the
possibilities in mind.
HOW TO MAKE A VAPORIZOR:
Supplies:
1. Light bulb.
2. Tube
3. Strong cleaner for inside of bulb.
4. Pliers, or something to grip and break off the metal end.
5. Substance for vaporization.
Procedure:
1. Choose a light bulb. Anyone that you can break the bottom off of, and see
throught it will work. Frosted bulbs will work, if you are able to clean the
internal coating off. Some won?t come off. I suggest using the round small
25 watt bulbs. They the just the right size and the metal end breaks clean
off, perfect. If you want portability, choose small bulbs like car break
lights.
2. Using piers or something similar, grip the metal end close to the bulb,
and ease pressure on it. You want to break it as clean off as possible.
3. Clean the bulb inside and out. Make sure you get the internal clean
because of coatings and frostings.
4. You need a tube, the best is a bic-type pen. Take out the guts. You need
a plastic tube and not a straw because the heat applied to the bulb will
melt a straw first use. A pen tube will last forever. Continued use of the
same tube will yield build up of the substance in the inner walls of the
tube. This can be re-vaporized.
5. Use the shit. Some people may need something to hold the bulb due to
heat. After much use the shit will buildup on the sides of the bulb. You can
vaporize it, but with weed you will need to clean it often. The bulb becomes
yellow, and the black weed sticks to it. When this happens you can?t see the
vapor to inhale it. For the best vaporizer use the round-small 25 watt clear
bulbs, with a bic-style pen tube that has a finger grip. The end will break
off clean, and you insert the finger-grip end into the bulb. The grip will
hold it in place, and it works perfect. Remember not to grab the hot bulb.
Any bulb will burn out after much use. The inside will become too covered in
spent shit. Then you need to find a new one. Enjoy this basic addict
information!
<---------------------------------------------------------------------------------------------->
The following document was written by egregious. E-mail me @:
counterprogram@hotmail.com FUCK THE WORLD!