💾 Archived View for gemini.spam.works › mirrors › textfiles › uploads › shell.text captured on 2020-10-31 at 01:13:38.
-=-=-=-=-=-=-
NOTE: this document is for educational purposes only and i am not
held responsible for any damage or destruction caused by your
actions.
Name: shot gun shell explosive
SUPPLIES:
1 shot gun shell
some tape
1 marble
1 needle
a 7" peice of string
PROCEDURE:
1)open up the shot gun shell one the side with the flaps
2) take out all of the b.b's
3)then cut off the shell down to the wading
4)take the marble and tape it to the pin of the shell and
tape up the whole shot gun shell so that it is copletly sealed
5) then take the needle and glue it into the opposite
side of the marble and then tie the peice of string to the needle so
that it wont come off
6) throw the shell explosive up as high as you can and
make sure it lands on something solid
OPTIONS:
1) you can leave the bb's in the shell but you must make
sure that you duck down behind something before you throw it
because the bb's wont be guided by a barrel so they will fly
everywhere
2) you can take out all of the wading and add or subtract
gun powder from the shell but then you have to put the wading back
in
3) take the wading out and then put inside a fire cracker,
but before you put the fire cracker in the shell soak the fuse in
gasoline
4) try taking the gun powder out and filling it with other
flash powders or chemicles
4/5/97
By Incendie
theglobe.com
Your friendly full-service integrated online community.
http://www.theglobe.com