💾 Archived View for gemini.spam.works › mirrors › textfiles › uploads › parachute.txt captured on 2020-10-31 at 01:18:52.
-=-=-=-=-=-=-
How To Build A Parachute A parachute is one of the best smoking methods around. You can get really high with barely any weed. It is an upgrade of the gravity bong exept requires no water. You will need the following materials: - Empty 2L bottle - Duct tape or Electrical tape - A pipe bowl or Aluminuim foil - An empty plastic Bread bag - A bit of string First of all take the 2L and cut off about an inch from the bottom of the bottle. Then you take the bread bag and flip it inside out and place it inside the bottle. Tape the bread bag in place so that no air can escape. Now take the cap and cut a hole in it to fit your pipe bowl and tape it in place. If you do not have a pipe bowl cut a big hole in the cap and place the aluminium foil over it and tape it in place, then you take a toothpick and poke little holes in the foil. Now tape the bit of string to the bottom of the bread bag. How to use: Place a nug in the bowl or on the tin foil, then you light the weed and begin to pull on the string slowly. Remember the slower the better. Then once the bottle is completely filled with smoke, untwist the cap and inhale. Get ready for the biggest toke you have ever had! Remember to exhale as much air as possible before inhaling the smoke. I plan to write many more texts on how to build the best homemade smoking devices ever! This text was written by Marleysplift.