Network Working Group H. Schulzrinne Request for Comments: 2326 Columbia U. Category: Standards Track A. Rao Netscape R. Lanphier RealNetworks April 1998 Real Time Streaming Protocol (RTSP) Status of this Memo This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited. Copyright Notice Copyright (C) The Internet Society (1998). All Rights Reserved. Abstract The Real Time Streaming Protocol, or RTSP, is an application-level protocol for control over the delivery of data with real-time properties. RTSP provides an extensible framework to enable controlled, on-demand delivery of real-time data, such as audio and video. Sources of data can include both live data feeds and stored clips. This protocol is intended to control multiple data delivery sessions, provide a means for choosing delivery channels such as UDP, multicast UDP and TCP, and provide a means for choosing delivery mechanisms based upon RTP (RFC 1889). Table of Contents * 1 Introduction ................................................. 5 + 1.1 Purpose ............................................... 5 + 1.2 Requirements .......................................... 6 + 1.3 Terminology ........................................... 6 + 1.4 Protocol Properties ................................... 9 + 1.5 Extending RTSP ........................................ 11 + 1.6 Overall Operation ..................................... 11 + 1.7 RTSP States ........................................... 12 + 1.8 Relationship with Other Protocols ..................... 13 * 2 Notational Conventions ....................................... 14 * 3 Protocol Parameters .......................................... 14 + 3.1 RTSP Version .......................................... 14 Schulzrinne, et. al. Standards Track [Page 1] RFC 2326 Real Time Streaming Protocol April 1998 + 3.2 RTSP URL .............................................. 14 + 3.3 Conference Identifiers ................................ 16 + 3.4 Session Identifiers ................................... 16 + 3.5 SMPTE Relative Timestamps ............................. 16 + 3.6 Normal Play Time ...................................... 17 + 3.7 Absolute Time ......................................... 18 + 3.8 Option Tags ........................................... 18 o 3.8.1 Registering New Option Tags with IANA .......... 18 * 4 RTSP Message ................................................. 19 + 4.1 Message Types ......................................... 19 + 4.2 Message Headers ....................................... 19 + 4.3 Message Body .......................................... 19 + 4.4 Message Length ........................................ 20 * 5 General Header Fields ........................................ 20 * 6 Request ...................................................... 20 + 6.1 Request Line .......................................... 21 + 6.2 Request Header Fields ................................. 21 * 7 Response ..................................................... 22 + 7.1 Status-Line ........................................... 22 o 7.1.1 Status Code and Reason Phrase .................. 22 o 7.1.2 Response Header Fields ......................... 26 * 8 Entity ....................................................... 27 + 8.1 Entity Header Fields .................................. 27 + 8.2 Entity Body ........................................... 28 * 9 Connections .................................................. 28 + 9.1 Pipelining ............................................ 28 + 9.2 Reliability and Acknowledgements ...................... 28 * 10 Method Definitions .......................................... 29 + 10.1 OPTIONS .............................................. 30 + 10.2 DESCRIBE ............................................. 31 + 10.3 ANNOUNCE ............................................. 32 + 10.4 SETUP ................................................ 33 + 10.5 PLAY ................................................. 34 + 10.6 PAUSE ................................................ 36 + 10.7 TEARDOWN ............................................. 37 + 10.8 GET_PARAMETER ........................................ 37 + 10.9 SET_PARAMETER ........................................ 38 + 10.10 REDIRECT ............................................ 39 + 10.11 RECORD .............................................. 39 + 10.12 Embedded (Interleaved) Binary Data .................. 40 * 11 Status Code Definitions ..................................... 41 + 11.1 Success 2xx .......................................... 41 o 11.1.1 250 Low on Storage Space ...................... 41 + 11.2 Redirection 3xx ...................................... 41 + 11.3 Client Error 4xx ..................................... 42 o 11.3.1 405 Method Not Allowed ........................ 42 o 11.3.2 451 Parameter Not Understood .................. 42 o 11.3.3 452 Conference Not Found ...................... 42 Schulzrinne, et. al. Standards Track [Page 2] RFC 2326 Real Time Streaming Protocol April 1998 o 11.3.4 453 Not Enough Bandwidth ...................... 42 o 11.3.5 454 Session Not Found ......................... 42 o 11.3.6 455 Method Not Valid in This State ............ 42 o 11.3.7 456 Header Field Not Valid for Resource ....... 42 o 11.3.8 457 Invalid Range ............................. 43 o 11.3.9 458 Parameter Is Read-Only .................... 43 o 11.3.10 459 Aggregate Operation Not Allowed .......... 43 o 11.3.11 460 Only Aggregate Operation Allowed ......... 43 o 11.3.12 461 Unsupported Transport .................... 43 o 11.3.13 462 Destination Unreachable .................. 43 o 11.3.14 551 Option not supported ..................... 43 * 12 Header Field Definitions .................................... 44 + 12.1 Accept ............................................... 46 + 12.2 Accept-Encoding ...................................... 46 + 12.3 Accept-Language ...................................... 46 + 12.4 Allow ................................................ 46 + 12.5 Authorization ........................................ 46 + 12.6 Bandwidth ............................................ 46 + 12.7 Blocksize ............................................ 47 + 12.8 Cache-Control ........................................ 47 + 12.9 Conference ........................................... 49 + 12.10 Connection .......................................... 49 + 12.11 Content-Base ........................................ 49 + 12.12 Content-Encoding .................................... 49 + 12.13 Content-Language .................................... 50 + 12.14 Content-Length ...................................... 50 + 12.15 Content-Location .................................... 50 + 12.16 Content-Type ........................................ 50 + 12.17 CSeq ................................................ 50 + 12.18 Date ................................................ 50 + 12.19 Expires ............................................. 50 + 12.20 From ................................................ 51 + 12.21 Host ................................................ 51 + 12.22 If-Match ............................................ 51 + 12.23 If-Modified-Since ................................... 52 + 12.24 Last-Modified........................................ 52 + 12.25 Location ............................................ 52 + 12.26 Proxy-Authenticate .................................. 52 + 12.27 Proxy-Require ....................................... 52 + 12.28 Public .............................................. 53 + 12.29 Range ............................................... 53 + 12.30 Referer ............................................. 54 + 12.31 Retry-After ......................................... 54 + 12.32 Require ............................................. 54 + 12.33 RTP-Info ............................................ 55 + 12.34 Scale ............................................... 56 + 12.35 Speed ............................................... 57 + 12.36 Server .............................................. 57 Schulzrinne, et. al. Standards Track [Page 3] RFC 2326 Real Time Streaming Protocol April 1998 + 12.37 Session ............................................. 57 + 12.38 Timestamp ........................................... 58 + 12.39 Transport ........................................... 58 + 12.40 Unsupported ......................................... 62 + 12.41 User-Agent .......................................... 62 + 12.42 Vary ................................................ 62 + 12.43 Via ................................................. 62 + 12.44 WWW-Authenticate .................................... 62 * 13 Caching ..................................................... 62 * 14 Examples .................................................... 63 + 14.1 Media on Demand (Unicast) ............................ 63 + 14.2 Streaming of a Container file ........................ 65 + 14.3 Single Stream Container Files ........................ 67 + 14.4 Live Media Presentation Using Multicast .............. 69 + 14.5 Playing media into an existing session ............... 70 + 14.6 Recording ............................................ 71 * 15 Syntax ...................................................... 72 + 15.1 Base Syntax .......................................... 72 * 16 Security Considerations ..................................... 73 * A RTSP Protocol State Machines ................................. 76 + A.1 Client State Machine .................................. 76 + A.2 Server State Machine .................................. 77 * B Interaction with RTP ......................................... 79 * C Use of SDP for RTSP Session Descriptions ..................... 80 + C.1 Definitions ........................................... 80 o C.1.1 Control URL .................................... 80 o C.1.2 Media streams .................................. 81 o C.1.3 Payload type(s) ................................ 81 o C.1.4 Format-specific parameters ..................... 81 o C.1.5 Range of presentation .......................... 82 o C.1.6 Time of availability ........................... 82 o C.1.7 Connection Information ......................... 82 o C.1.8 Entity Tag ..................................... 82 + C.2 Aggregate Control Not Available ....................... 83 + C.3 Aggregate Control Available ........................... 83 * D Minimal RTSP implementation .................................. 85 + D.1 Client ................................................ 85 o D.1.1 Basic Playback ................................. 86 o D.1.2 Authentication-enabled ......................... 86 + D.2 Server ................................................ 86 o D.2.1 Basic Playback ................................. 87 o D.2.2 Authentication-enabled ......................... 87 * E Authors' Addresses ........................................... 88 * F Acknowledgements ............................................. 89 * References ..................................................... 90 * Full Copyright Statement ....................................... 92 Schulzrinne, et. al. Standards Track [Page 4] RFC 2326 Real Time Streaming Protocol April 1998 1 Introduction 1.1 Purpose The Real-Time Streaming Protocol (RTSP) establishes and controls either a single or several time-synchronized streams of continuous media such as audio and video. It does not typically deliver the continuous streams itself, although interleaving of the continuous media stream with the control stream is possible (see Section 10.12). In other words, RTSP acts as a "network remote control" for multimedia servers. The set of streams to be controlled is defined by a presentation description. This memorandum does not define a format for a presentation description. There is no notion of an RTSP connection; instead, a server maintains a session labeled by an identifier. An RTSP session is in no way tied to a transport-level connection such as a TCP connection. During an RTSP session, an RTSP client may open and close many reliable transport connections to the server to issue RTSP requests. Alternatively, it may use a connectionless transport protocol such as UDP. The streams controlled by RTSP may use RTP [1], but the operation of RTSP does not depend on the transport mechanism used to carry continuous media. The protocol is intentionally similar in syntax and operation to HTTP/1.1 [2] so that extension mechanisms to HTTP can in most cases also be added to RTSP. However, RTSP differs in a number of important aspects from HTTP: * RTSP introduces a number of new methods and has a different protocol identifier. * An RTSP server needs to maintain state by default in almost all cases, as opposed to the stateless nature of HTTP. * Both an RTSP server and client can issue requests. * Data is carried out-of-band by a different protocol. (There is an exception to this.) * RTSP is defined to use ISO 10646 (UTF-8) rather than ISO 8859-1, consistent with current HTML internationalization efforts [3]. * The Request-URI always contains the absolute URI. Because of backward compatibility with a historical blunder, HTTP/1.1 [2] carries only the absolute path in the request and puts the host name in a separate header field. This makes "virtual hosting" easier, where a single host with one IP address hosts several document trees. Schulzrinne, et. al. Standards Track [Page 5] RFC 2326 Real Time Streaming Protocol April 1998 The protocol supports the following operations: Retrieval of media from media server: The client can request a presentation description via HTTP or some other method. If the presentation is being multicast, the presentation description contains the multicast addresses and ports to be used for the continuous media. If the presentation is to be sent only to the client via unicast, the client provides the destination for security reasons. Invitation of a media server to a conference: A media server can be "invited" to join an existing conference, either to play back media into the presentation or to record all or a subset of the media in a presentation. This mode is useful for distributed teaching applications. Several parties in the conference may take turns "pushing the remote control buttons." Addition of media to an existing presentation: Particularly for live presentations, it is useful if the server can tell the client about additional media becoming available. RTSP requests may be handled by proxies, tunnels and caches as in HTTP/1.1 [2]. 1.2 Requirements The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [4]. 1.3 Terminology Some of the terminology has been adopted from HTTP/1.1 [2]. Terms not listed here are defined as in HTTP/1.1. Aggregate control: The control of the multiple streams using a single timeline by the server. For audio/video feeds, this means that the client may issue a single play or pause message to control both the audio and video feeds. Conference: a multiparty, multimedia presentation, where "multi" implies greater than or equal to one. Schulzrinne, et. al. Standards Track [Page 6] RFC 2326 Real Time Streaming Protocol April 1998 Client: The client requests continuous media data from the media server. Connection: A transport layer virtual circuit established between two programs for the purpose of communication. Container file: A file which may contain multiple media streams which often comprise a presentation when played together. RTSP servers may offer aggregate control on these files, though the concept of a container file is not embedded in the protocol. Continuous media: Data where there is a timing relationship between source and sink; that is, the sink must reproduce the timing relationship that existed at the source. The most common examples of continuous media are audio and motion video. Continuous media can be real-time (interactive), where there is a "tight" timing relationship between source and sink, or streaming (playback), where the relationship is less strict. Entity: The information transferred as the payload of a request or response. An entity consists of metainformation in the form of entity-header fields and content in the form of an entity- body, as described in Section 8. Media initialization: Datatype/codec specific initialization. This includes such things as clockrates, color tables, etc. Any transport- independent information which is required by a client for playback of a media stream occurs in the media initialization phase of stream setup. Media parameter: Parameter specific to a media type that may be changed before or during stream playback. Media server: The server providing playback or recording services for one or more media streams. Different media streams within a presentation may originate from different media servers. A media server may reside on the same or a different host as the web server the presentation is invoked from. Schulzrinne, et. al. Standards Track [Page 7] RFC 2326 Real Time Streaming Protocol April 1998 Media server indirection: Redirection of a media client to a different media server. (Media) stream: A single media instance, e.g., an audio stream or a video stream as well as a single whiteboard or shared application group. When using RTP, a stream consists of all RTP and RTCP packets created by a source within an RTP session. This is equivalent to the definition of a DSM-CC stream([5]). Message: The basic unit of RTSP communication, consisting of a structured sequence of octets matching the syntax defined in Section 15 and transmitted via a connection or a connectionless protocol. Participant: Member of a conference. A participant may be a machine, e.g., a media record or playback server. Presentation: A set of one or more streams presented to the client as a complete media feed, using a presentation description as defined below. In most cases in the RTSP context, this implies aggregate control of those streams, but does not have to. Presentation description: A presentation description contains information about one or more media streams within a presentation, such as the set of encodings, network addresses and information about the content. Other IETF protocols such as SDP (RFC 2327 [6]) use the term "session" for a live presentation. The presentation description may take several different formats, including but not limited to the session description format SDP. Response: An RTSP response. If an HTTP response is meant, that is indicated explicitly. Request: An RTSP request. If an HTTP request is meant, that is indicated explicitly. RTSP session: A complete RTSP "transaction", e.g., the viewing of a movie. A session typically consists of a client setting up a transport mechanism for the continuous media stream (SETUP), starting the stream with PLAY or RECORD, and closing the Schulzrinne, et. al. Standards Track [Page 8] RFC 2326 Real Time Streaming Protocol April 1998 stream with TEARDOWN. Transport initialization: The negotiation of transport information (e.g., port numbers, transport protocols) between the client and the server. 1.4 Protocol Properties RTSP has the following properties: Extendable: New methods and parameters can be easily added to RTSP. Easy to parse: RTSP can be parsed by standard HTTP or MIME parsers. Secure: RTSP re-uses web security mechanisms. All HTTP authentication mechanisms such as basic (RFC 2068 [2, Section 11.1]) and digest authentication (RFC 2069 [8]) are directly applicable. One may also reuse transport or network layer security mechanisms. Transport-independent: RTSP may use either an unreliable datagram protocol (UDP) (RFC 768 [9]), a reliable datagram protocol (RDP, RFC 1151, not widely used [10]) or a reliable stream protocol such as TCP (RFC 793 [11]) as it implements application-level reliability. Multi-server capable: Each media stream within a presentation can reside on a different server. The client automatically establishes several concurrent control sessions with the different media servers. Media synchronization is performed at the transport level. Control of recording devices: The protocol can control both recording and playback devices, as well as devices that can alternate between the two modes ("VCR"). Separation of stream control and conference initiation: Stream control is divorced from inviting a media server to a conference. The only requirement is that the conference initiation protocol either provides or can be used to create a unique conference identifier. In particular, SIP [12] or H.323 [13] may be used to invite a server to a conference. Schulzrinne, et. al. Standards Track [Page 9] RFC 2326 Real Time Streaming Protocol April 1998 Suitable for professional applications: RTSP supports frame-level accuracy through SMPTE time stamps to allow remote digital editing. Presentation description neutral: The protocol does not impose a particular presentation description or metafile format and can convey the type of format to be used. However, the presentation description must contain at least one RTSP URI. Proxy and firewall friendly: The protocol should be readily handled by both application and transport-layer (SOCKS [14]) firewalls. A firewall may need to understand the SETUP method to open a "hole" for the UDP media stream. HTTP-friendly: Where sensible, RTSP reuses HTTP concepts, so that the existing infrastructure can be reused. This infrastructure includes PICS (Platform for Internet Content Selection [15,16]) for associating labels with content. However, RTSP does not just add methods to HTTP since the controlling continuous media requires server state in most cases. Appropriate server control: If a client can start a stream, it must be able to stop a stream. Servers should not start streaming to clients in such a way that clients cannot stop the stream. Transport negotiation: The client can negotiate the transport method prior to actually needing to process a continuous media stream. Capability negotiation: If basic features are disabled, there must be some clean mechanism for the client to determine which methods are not going to be implemented. This allows clients to present the appropriate user interface. For example, if seeking is not allowed, the user interface must be able to disallow moving a sliding position indicator. An earlier requirement in RTSP was multi-client capability. However, it was determined that a better approach was to make sure that the protocol is easily extensible to the multi-client scenario. Stream identifiers can be used by several control streams, so that "passing the remote" would be possible. The protocol would not address how several clients negotiate access; this is left to either a "social protocol" or some other floor Schulzrinne, et. al. Standards Track [Page 10] RFC 2326 Real Time Streaming Protocol April 1998 control mechanism. 1.5 Extending RTSP Since not all media servers have the same functionality, media servers by necessity will support different sets of requests. For example: * A server may only be capable of playback thus has no need to support the RECORD request. * A server may not be capable of seeking (absolute positioning) if it is to support live events only. * Some servers may not support setting stream parameters and thus not support GET_PARAMETER and SET_PARAMETER. A server SHOULD implement all header fields described in Section 12. It is up to the creators of presentation descriptions not to ask the impossible of a server. This situation is similar in HTTP/1.1 [2], where the methods described in [H19.6] are not likely to be supported across all servers. RTSP can be extended in three ways, listed here in order of the magnitude of changes supported: * Existing methods can be extended with new parameters, as long as these parameters can be safely ignored by the recipient. (This is equivalent to adding new parameters to an HTML tag.) If the client needs negative acknowledgement when a method extension is not supported, a tag corresponding to the extension may be added in the Require: field (see Section 12.32). * New methods can be added. If the recipient of the message does not understand the request, it responds with error code 501 (Not implemented) and the sender should not attempt to use this method again. A client may also use the OPTIONS method to inquire about methods supported by the server. The server SHOULD list the methods it supports using the Public response header. * A new version of the protocol can be defined, allowing almost all aspects (except the position of the protocol version number) to change. 1.6 Overall Operation Each presentation and media stream may be identified by an RTSP URL. The overall presentation and the properties of the media the presentation is made up of are defined by a presentation description file, the format of which is outside the scope of this specification. The presentation description file may be obtained by the client using Schulzrinne, et. al. Standards Track [Page 11] RFC 2326 Real Time Streaming Protocol April 1998 HTTP or other means such as email and may not necessarily be stored on the media server. For the purposes of this specification, a presentation description is assumed to describe one or more presentations, each of which maintains a common time axis. For simplicity of exposition and without loss of generality, it is assumed that the presentation description contains exactly one such presentation. A presentation may contain several media streams. The presentation description file contains a description of the media streams making up the presentation, including their encodings, language, and other parameters that enable the client to choose the most appropriate combination of media. In this presentation description, each media stream that is individually controllable by RTSP is identified by an RTSP URL, which points to the media server handling that particular media stream and names the stream stored on that server. Several media streams can be located on different servers; for example, audio and video streams can be split across servers for load sharing. The description also enumerates which transport methods the server is capable of. Besides the media parameters, the network destination address and port need to be determined. Several modes of operation can be distinguished: Unicast: The media is transmitted to the source of the RTSP request, with the port number chosen by the client. Alternatively, the media is transmitted on the same reliable stream as RTSP. Multicast, server chooses address: The media server picks the multicast address and port. This is the typical case for a live or near-media-on-demand transmission. Multicast, client chooses address: If the server is to participate in an existing multicast conference, the multicast address, port and encryption key are given by the conference description, established by means outside the scope of this specification. 1.7 RTSP States RTSP controls a stream which may be sent via a separate protocol, independent of the control channel. For example, RTSP control may occur on a TCP connection while the data flows via UDP. Thus, data delivery continues even if no RTSP requests are received by the media Schulzrinne, et. al. Standards Track [Page 12] RFC 2326 Real Time Streaming Protocol April 1998 server. Also, during its lifetime, a single media stream may be controlled by RTSP requests issued sequentially on different TCP connections. Therefore, the server needs to maintain "session state" to be able to correlate RTSP requests with a stream. The state transitions are described in Section A. Many methods in RTSP do not contribute to state. However, the following play a central role in defining the allocation and usage of stream resources on the server: SETUP, PLAY, RECORD, PAUSE, and TEARDOWN. SETUP: Causes the server to allocate resources for a stream and start an RTSP session. PLAY and RECORD: Starts data transmission on a stream allocated via SETUP. PAUSE: Temporarily halts a stream without freeing server resources. TEARDOWN: Frees resources associated with the stream. The RTSP session ceases to exist on the server. RTSP methods that contribute to state use the Session header field (Section 12.37) to identify the RTSP session whose state is being manipulated. The server generates session identifiers in response to SETUP requests (Section 10.4). 1.8 Relationship with Other Protocols RTSP has some overlap in functionality with HTTP. It also may interact with HTTP in that the initial contact with streaming content is often to be made through a web page. The current protocol specification aims to allow different hand-off points between a web server and the media server implementing RTSP. For example, the presentation description can be retrieved using HTTP or RTSP, which reduces roundtrips in web-browser-based scenarios, yet also allows for standalone RTSP servers and clients which do not rely on HTTP at all. However, RTSP differs fundamentally from HTTP in that data delivery takes place out-of-band in a different protocol. HTTP is an asymmetric protocol where the client issues requests and the server responds. In RTSP, both the media client and media server can issue requests. RTSP requests are also not stateless; they may set parameters and continue to control a media stream long after the Schulzrinne, et. al. Standards Track [Page 13] RFC 2326 Real Time Streaming Protocol April 1998 request has been acknowledged. Re-using HTTP functionality has advantages in at least two areas, namely security and proxies. The requirements are very similar, so having the ability to adopt HTTP work on caches, proxies and authentication is valuable. While most real-time media will use RTP as a transport protocol, RTSP is not tied to RTP. RTSP assumes the existence of a presentation description format that can express both static and temporal properties of a presentation containing several media streams. 2 Notational Conventions Since many of the definitions and syntax are identical to HTTP/1.1, this specification only points to the section where they are defined rather than copying it. For brevity, [HX.Y] is to be taken to refer to Section X.Y of the current HTTP/1.1 specification (RFC 2068 [2]). All the mechanisms specified in this document are described in both prose and an augmented Backus-Naur form (BNF) similar to that used in [H2.1]. It is described in detail in RFC 2234 [17], with the difference that this RTSP specification maintains the "1#" notation for comma-separated lists. In this memo, we use indented and smaller-type paragraphs to provide background and motivation. This is intended to give readers who were not involved with the formulation of the specification an understanding of why things are the way that they are in RTSP. 3 Protocol Parameters 3.1 RTSP Version [H3.1] applies, with HTTP replaced by RTSP. 3.2 RTSP URL The "rtsp" and "rtspu" schemes are used to refer to network resources via the RTSP protocol. This section defines the scheme-specific syntax and semantics for RTSP URLs. rtsp_URL = ( "rtsp:" | "rtspu:" ) "//" host [ ":" port ] [ abs_path ] host = port = *DIGIT abs_path is defined in [H3.2.1]. Note that fragment and query identifiers do not have a well-defined meaning at this time, with the interpretation left to the RTSP server. The scheme rtsp requires that commands are issued via a reliable protocol (within the Internet, TCP), while the scheme rtspu identifies an unreliable protocol (within the Internet, UDP). If the port is empty or not given, port 554 is assumed. The semantics are that the identified resource can be controlled by RTSP at the server listening for TCP (scheme "rtsp") connections or UDP (scheme "rtspu") packets on that port of host, and the Request-URI for the resource is rtsp_URL. The use of IP addresses in URLs SHOULD be avoided whenever possible (see RFC 1924 [19]). A presentation or a stream is identified by a textual media identifier, using the character set and escape conventions [H3.2] of URLs (RFC 1738 [20]). URLs may refer to a stream or an aggregate of streams, i.e., a presentation. Accordingly, requests described in Section 10 can apply to either the whole presentation or an individual stream within the presentation. Note that some request methods can only be applied to streams, not presentations and vice versa. For example, the RTSP URL: rtsp://media.example.com:554/twister/audiotrack identifies the audio stream within the presentation "twister", which can be controlled via RTSP requests issued over a TCP connection to port 554 of host media.example.com. Also, the RTSP URL: rtsp://media.example.com:554/twister identifies the presentation "twister", which may be composed of audio and video streams. This does not imply a standard way to reference streams in URLs. The presentation description defines the hierarchical relationships in the presentation and the URLs for the individual streams. A presentation description may name a stream "a.mov" and the whole presentation "b.mov". Schulzrinne, et. al. Standards Track [Page 15] RFC 2326 Real Time Streaming Protocol April 1998 The path components of the RTSP URL are opaque to the client and do not imply any particular file system structure for the server. This decoupling also allows presentation descriptions to be used with non-RTSP media control protocols simply by replacing the scheme in the URL. 3.3 Conference Identifiers Conference identifiers are opaque to RTSP and are encoded using standard URI encoding methods (i.e., LWS is escaped with %). They can contain any octet value. The conference identifier MUST be globally unique. For H.323, the conferenceID value is to be used. conference-id = 1*xchar Conference identifiers are used to allow RTSP sessions to obtain parameters from multimedia conferences the media server is participating in. These conferences are created by protocols outside the scope of this specification, e.g., H.323 [13] or SIP [12]. Instead of the RTSP client explicitly providing transport information, for example, it asks the media server to use the values in the conference description instead. 3.4 Session Identifiers Session identifiers are opaque strings of arbitrary length. Linear white space must be URL-escaped. A session identifier MUST be chosen randomly and MUST be at least eight octets long to make guessing it more difficult. (See Section 16.) session-id = 1*( ALPHA | DIGIT | safe ) 3.5 SMPTE Relative Timestamps A SMPTE relative timestamp expresses time relative to the start of the clip. Relative timestamps are expressed as SMPTE time codes for frame-level access accuracy. The time code has the format hours:minutes:seconds:frames.subframes, with the origin at the start of the clip. The default smpte format is "SMPTE 30 drop" format, with frame rate is 29.97 frames per second. Other SMPTE codes MAY be supported (such as "SMPTE 25") through the use of alternative use of "smpte time". For the "frames" field in the time value can assume the values 0 through 29. The difference between 30 and 29.97 frames per second is handled by dropping the first two frame indices (values 00 and 01) of every minute, except every tenth minute. If the frame value is zero, it may be omitted. Subframes are measured in one-hundredth of a frame. Schulzrinne, et. al. Standards Track [Page 16] RFC 2326 Real Time Streaming Protocol April 1998 smpte-range = smpte-type "=" smpte-time "-" [ smpte-time ] smpte-type = "smpte" | "smpte-30-drop" | "smpte-25" ; other timecodes may be added smpte-time = 1*2DIGIT ":" 1*2DIGIT ":" 1*2DIGIT [ ":" 1*2DIGIT ] [ "." 1*2DIGIT ] Examples: smpte=10:12:33:20- smpte=10:07:33- smpte=10:07:00-10:07:33:05.01 smpte-25=10:07:00-10:07:33:05.01 3.6 Normal Play Time Normal play time (NPT) indicates the stream absolute position relative to the beginning of the presentation. The timestamp consists of a decimal fraction. The part left of the decimal may be expressed in either seconds or hours, minutes, and seconds. The part right of the decimal point measures fractions of a second. The beginning of a presentation corresponds to 0.0 seconds. Negative values are not defined. The special constant now is defined as the current instant of a live event. It may be used only for live events. NPT is defined as in DSM-CC: "Intuitively, NPT is the clock the viewer associates with a program. It is often digitally displayed on a VCR. NPT advances normally when in normal play mode (scale = 1), advances at a faster rate when in fast scan forward (high positive scale ratio), decrements when in scan reverse (high negative scale ratio) and is fixed in pause mode. NPT is (logically) equivalent to SMPTE time codes." [5] npt-range = ( npt-time "-" [ npt-time ] ) | ( "-" npt-time ) npt-time = "now" | npt-sec | npt-hhmmss npt-sec = 1*DIGIT [ "." *DIGIT ] npt-hhmmss = npt-hh ":" npt-mm ":" npt-ss [ "." *DIGIT ] npt-hh = 1*DIGIT ; any positive number npt-mm = 1*2DIGIT ; 0-59 npt-ss = 1*2DIGIT ; 0-59 Examples: npt=123.45-125 npt=12:05:35.3- npt=now- The syntax conforms to ISO 8601. The npt-sec notation is optimized for automatic generation, the ntp-hhmmss notation for consumption by human readers. The "now" constant allows clients to request to Schulzrinne, et. al. Standards Track [Page 17] RFC 2326 Real Time Streaming Protocol April 1998 receive the live feed rather than the stored or time-delayed version. This is needed since neither absolute time nor zero time are appropriate for this case. 3.7 Absolute Time Absolute time is expressed as ISO 8601 timestamps, using UTC (GMT). Fractions of a second may be indicated. utc-range = "clock" "=" utc-time "-" [ utc-time ] utc-time = utc-date "T" utc-time "Z" utc-date = 8DIGIT ; < YYYYMMDD > utc-time = 6DIGIT [ "." fraction ] ; < HHMMSS.fraction > Example for November 8, 1996 at 14h37 and 20 and a quarter seconds UTC: 19961108T143720.25Z 3.8 Option Tags Option tags are unique identifiers used to designate new options in RTSP. These tags are used in Require (Section 12.32) and Proxy- Require (Section 12.27) header fields. Syntax: option-tag = 1*xchar The creator of a new RTSP option should either prefix the option with a reverse domain name (e.g., "com.foo.mynewfeature" is an apt name for a feature whose inventor can be reached at "foo.com"), or register the new option with the Internet Assigned Numbers Authority (IANA). 3.8.1 Registering New Option Tags with IANA When registering a new RTSP option, the following information should be provided: * Name and description of option. The name may be of any length, but SHOULD be no more than twenty characters long. The name MUST not contain any spaces, control characters or periods. * Indication of who has change control over the option (for example, IETF, ISO, ITU-T, other international standardization bodies, a consortium or a particular company or group of companies); Schulzrinne, et. al. Standards Track [Page 18] RFC 2326 Real Time Streaming Protocol April 1998 * A reference to a further description, if available, for example (in order of preference) an RFC, a published paper, a patent filing, a technical report, documented source code or a computer manual; * For proprietary options, contact information (postal and email address); 4 RTSP Message RTSP is a text-based protocol and uses the ISO 10646 character set in UTF-8 encoding (RFC 2279 [21]). Lines are terminated by CRLF, but receivers should be prepared to also interpret CR and LF by themselves as line terminators. Text-based protocols make it easier to add optional parameters in a self-describing manner. Since the number of parameters and the frequency of commands is low, processing efficiency is not a concern. Text-based protocols, if done carefully, also allow easy implementation of research prototypes in scripting languages such as Tcl, Visual Basic and Perl. The 10646 character set avoids tricky character set switching, but is invisible to the application as long as US-ASCII is being used. This is also the encoding used for RTCP. ISO 8859-1 translates directly into Unicode with a high-order octet of zero. ISO 8859-1 characters with the most-significant bit set are represented as 1100001x 10xxxxxx. (See RFC 2279 [21]) RTSP messages can be carried over any lower-layer transport protocol that is 8-bit clean. Requests contain methods, the object the method is operating upon and parameters to further describe the method. Methods are idempotent, unless otherwise noted. Methods are also designed to require little or no state maintenance at the media server. 4.1 Message Types See [H4.1] 4.2 Message Headers See [H4.2] 4.3 Message Body See [H4.3] Schulzrinne, et. al. Standards Track [Page 19] RFC 2326 Real Time Streaming Protocol April 1998 4.4 Message Length When a message body is included with a message, the length of that body is determined by one of the following (in order of precedence): 1. Any response message which MUST NOT include a message body (such as the 1xx, 204, and 304 responses) is always terminated by the first empty line after the header fields, regardless of the entity-header fields present in the message. (Note: An empty line consists of only CRLF.) 2. If a Content-Length header field (section 12.14) is present, its value in bytes represents the length of the message-body. If this header field is not present, a value of zero is assumed. 3. By the server closing the connection. (Closing the connection cannot be used to indicate the end of a request body, since that would leave no possibility for the server to send back a response.) Note that RTSP does not (at present) support the HTTP/1.1 "chunked" transfer coding(see [H3.6]) and requires the presence of the Content-Length header field. Given the moderate length of presentation descriptions returned, the server should always be able to determine its length, even if it is generated dynamically, making the chunked transfer encoding unnecessary. Even though Content-Length must be present if there is any entity body, the rules ensure reasonable behavior ev