Well, that's a fine kettle of fish, I thought as I powered up my main computer and it reported it couldn't find the hard drive. First the keyboard, and now the hard drive. I resisted the urge to say, “What else could possibly go wrong?”
Late last night we had a power outage. I did the usual “shut down all the computers, then shut down the UPS (Uninterruptable Power Supply)es. Fortunately, it only lasted some ten minutes and the power came back up. I powered up the UPSes, then I started with my main computer. It got to the point where I could log in, only the keyboard didn't work.
That's odd, I thought. I then powered up my other computer, the Mac mini. Both computers use the same keyboard in a convoluted setup involving a KVM (Keyboard Video Mouse demultiplexer) and Synergy [1] that works for me. The keyboard worked fine on the Mac mini, so it wasn't the keyboard [2] that was bad.
But both computers lack a PS (Personal System)/2 port, so I have to run the keyboard cables through a PS/2-to-USB (Universal Serial Bus) converter (one per system). Logging into my main machine from the Mac and scanning the USB subsystem showed nothing connected, which lead me to believe said USB system on my main machine was dead. But oddly, there was nothing in the boot messages that said the USB couldn't be initialized or was otherwise bad. I then thought perhaps some dust had gotten in the way? I mean, the system was dusty.
I took the machine outside and let loose with some canned air. Back inside, hook everything back up and Well, that's a fine kettle of fish …
At this point, I did not panic, but instead applied Conner's Three Rules to Worrying:
I figured rule 2 applied, and waited until later.
* * * * *
Later came, and I decided to take a methodical approach to the problem. I unhooked the computer, opened the case and made sure all the cables were firmly in place. Perhaps letting loose with the canned air knocked a cable loose and in fact, that was the issue—the power cable to the CD-ROM (Compact Disk Read Only Memory) had been knocked loose, and that's probably the hard drive the computer was complaining about. Everything else seemed firmly in place.
As an aisde, I do want to mention the case I have for my main computer is one of the nicest cases I've seen. It's easy to get into without any tools, wire/cable management is super clean, and nothing is hard to get at or remove. It's a beautiful case.
Anyway, I hook everything back up, and lo'! It booted up, But alas, the keyboard was still borked.
I still didn't panic. The computer works. I don't have to get a new harddrive and the mess that entails. I can still work without a keyboard. At the very least, I can see if I have a USB PC (Personal Computer) card in my collection (I gave it a 10% chance of having one in storage) and if not, I could always order one.
But then something said try the PS/2-to-USB converter on the Mac on my main system. And lo'—it worked! It was the PS/2-to-USB converter on my main system that for some reason fried—it wasn't the USB subsystem at all! And that's a much easier problem to work around.
[1] https://symless.com/synergy