The things I do to configure equipment

[Manually wiring up a serial port] [1] [2]It was a little easier this time since I wasn't shoving raw wires into the female DE-9 connector [3], but pre-crimped wires. Still, working out which way the wires go took a few diagrams to get it straight, so to speak.

[Working out which wires go where] [4] [5] So, for my own notes, the wiring diagram for the BayTech DS9 [6] with the DS72 [7] module with a roll-over cable (Smirk, you might want to copy this down):

>

```

BLUE → pin 4 DE-9

ORANGE →

BLACK → pin 7

RED → pin 3

GREEN → pin 2

YELLOW → pin 1

BROWN → pin 5

WHITE → pin 8

```

and for a straight through cable:

>

```

BLUE → pin 8

ORANGE → pin 5

BLACK → pin 1

RED → pin 2

GREEN → pin 3

YELLOW → pin 7

BROWN →

WHITE → pin 4

```

[1] /boston/2007/06/03/thumb.p6030006.jpg

[2] /boston/2007/06/03/p6030006.jpg

[3] /boston/2006/01/31.2

[4] /boston/2007/06/03/thumb.p6030002.jpg

[5] /boston/2007/06/03/p6030002.jpg

[6] http://www.baytech.net/products/showprod.php?prod=DS9IPS

[7] http://www.baytech.net/products/showprod.php?prod=DS72

Gemini Mention this post

Contact the author